How to make a do-it-yourself spinner from bearings and glue. Spinner - what is it and what is it for? How to make a do-it-yourself spinner at home? Homemade spinner from bearings

Spinner- a newfangled simulator for the development of fingers, stress relief with a bearing in the center. To bring it into working condition, you need to take it by inner part and unwind the outer one. The spinner will spin around the axis for a while.

The spinner is fun for everyone: for respectable men in expensive suits, and for restless children, the structure does not provide for small parts, and the toy itself does not have sharp corners.

The device has a beautiful aesthetic appearance, various colors. Its compact size allows you to take it with you everywhere.

A spinner is bought for personal use, as an unusual gift for all age categories of people of different status: the item will bring joy and pleasure to everyone.

According to experts, the subject helps people with autism, attention deficit disorder, to concentrate. For hyperactive children who do not know what to do with themselves, it helps to calm down. Some people find solace in the sound of the device vibrating.

In the article you will learn details about the little thing, the history of creation, instructions for use. Also learn how to make a spinner with your own hands.

Kinds

Spinners come in a variety of shapes, sizes, and prices range from a dollar to hundreds of dollars. The toy is made from different materials: metal, wood, plastic. When using a combined material.

Spinners come with three, two petals, smooth and rough.

Plastic ones are larger and lighter in weight than metal ones.

The ceramic bearing contributes to the long-term rotation of the object.

History of occurrence

The fidget spinner was invented by American chemical engineer Katherine Hettinger. According to her, the idea of creating an anti-stress came to her in Israel. Seeing a picture of children throwing stones at police officers, she wanted to make a toy that would occupy the thoughts and hands of the boys, freeing their minds from pranks.

According to other sources, the scientist invented an occupation for her daughter, with whom she could not spend much time due to illness.

In the 90s, a woman offered her invention to manufacturers, but no one took the patent. At present, the device is not similar to the previously invented one.

In 2014, businessman Scott McCoskery created a similar stress relief product. This represented an iron spinning device. Everyone liked the invention, and in 2016 McCoskery filed a patent for himself.

On Russian market The product appeared in 2016.

What is a spinner for?

The purpose of the spinner is to train the hands, develop the motor skills of children. The device relieves stress, helps to cope with anxiety, concentrate, and calms.

Often, the simulator develops fingers and hands after injuries.

A worthy advantage of the finger spinner is that it helps to get rid of smoking. Monotonous twisting movements soothe and distract from thoughts about addictions.

How the device works

The gadget does not require batteries or accumulators to operate. There is a bearing in the central part. All you have to do is click your fingers and the unit will work. Hold on to the middle with your thumb and middle finger. The machine must be driven with the index finger.

How to spin video spinner

The bearings are of excellent quality. The higher the rating, the longer the spin takes. For a rotating element, a central bearing is sufficient, the rest serve decorative element and weighting to improve balance.

How long does it spin

How long does a spinner last? Rotation time is an important quality and one of the main indicators of traits good device. Connoisseurs of quality toys use only expensive bearings, calculated balance and the right materials for long-term rotation of the spinner.

It may not seem like much, but trust me, once you spin your first spinner, you will be surprised at how fast you want your spinner to spin faster and longer.

Spinner price starts from the dollar. Inexpensive trinkets rotate for a couple of minutes. The duration of rotation of serious units (using steel, copper, brass) reaches tens of minutes.

The greater the weight of the product, the faster the bearing works and the device rotates, the louder the sound and vibration. Ceramic and combined bearings vibrate less.

How long does it last

There is no definite answer to the question of how long a spinner lasts. The criteria for long service life depend on the materials used, the accuracy of operation, the lack of mechanical damage. Metal bearings will extend the life of the device for many years.

Those who are skeptical about these toys simply did not try to twist them. One has only to find “your” device, you don’t want to part with it, the lesson is addictive.

Do-it-yourself spinner at home

Make device with my own hands not so difficult, follow our advice, watch the video, add some dexterity and soon you will be spinning the product.

Paper without bearing

A do-it-yourself spinner without a bearing can be made from paper and improvised materials.

Master class of the Plastilin channel.

How to make a paper spinner First draw a drawing: take a round object with a suitable diameter (in the example - a bottle cap), draw a sketch as in the photo.

Then you need to smooth the corners between the circles.

Cut out the shape along the borders.

Attach to cardboard, circle and cut out the second identical part.

You need to cut 4 circles with a smaller diameter.

The coins will serve as a weighting agent. Stick on three parts according to gravity,

Glue on top of the second half with glue.

Make a hole in the center with nail scissors.

This is how the blanks should turn out.

Decorate your toy, paint it in your favorite colors.

Cut off a part of the juice tube and insert it into one of the circles.

Fix with glue, let dry.

We collect our unit.

A circle without a hole is glued on top.

Do-it-yourself paper spinner is ready.

How to make a spinner from improvised materials video

Do-it-yourself wood spinner

If you have golden hands and they know how to use a jigsaw, a drill, you can easily make a wood product. It will turn out smooth, solid, it will be pleasant to hold it in your hands. Below is a ZarkReed channel masterclass.

spinner bearing

What bearing to take for a spinner? Answer: any. Extract from a broken skateboard, scooter. If the fan is broken, the computer cooler - take it out of there. If there is nothing to disassemble, order online or purchase in a store.

Stages

For beginners, it's best to start small. wood material e.g. DPS. Production order:

Draw a drawing.

Cut out a sketch from paper, attach to wooden surface, circle.

Cut, sand the details with sandpaper.

Drill a hole in the middle - it will turn out neater.

An important point: the thickness and diameter of the hole in the tree and the bearing must match.

Coins are sealed with glue.

The base is painted over acrylic paints.

The central part, coins, is threaded and glued.

The spinner toy is ready.

Do-it-yourself wood spinner video

Do-it-yourself glowing spinner

Spinner can also be made glowing with led strip and battery. Stock up on the right ingredients, watch the video and make your own beauty.

If you make this little thing as a gift and give it to a dear person, he will appreciate it! This is a very popular and fashionable direction, you will need to look for those who are indifferent.

Text prepared by: Veronica

Photos of all kinds of spinners are filled with everything social media, so there is no problem with the question of what it is. Moreover, this rotating thing has become a trend in 2017, and the variety of their types, options and possibilities will not leave anyone indifferent.

There are turntables of different price categories from 29 rubles to several hundred thousand, but it is becoming more and more popular to make them yourself. It is more interesting and cheaper, and "your" toy is also unique and unusual. How to make a spinner at home - read this article.

What is it and why?

The spinner is an original fashionable anti-stress toy, also called a hand spinner and spinner. Its device and mechanism of action is simple: in the center there is a metal or ceramic bearing, and around it there are several blades or weights.

True, toys are now being modernized with might and main, experimenting with colors, materials, shapes, speakers, and even embedding a Bluetooth system for synchronization with a smartphone. Glow-in-the-dark spinners have also become widespread.

Both ordinary adults and psychologists argue about the functionality and benefits of spinning things. A consensus has not yet been reached, but most tend to believe that spinners have the following positive characteristics:

Calms in stressful situations;
Helps to concentrate;
Develops children's motor skills;
Copes with nervous and mental stress;
It becomes a great alternative to bad habits;
Causes desire to collect and collect;
Promotes communication.

The danger of modern toys lies in its ever-growing popularity, as schoolchildren begin to invent and implement rather extreme tricks for the sake of spectacular videos. Also, turntables can distract from study, develop unhealthy competition.

However, if a child or an adult is on fire with the idea of creating a spinner with their own hands, then here we can only talk about its undoubted benefits. Indeed, in the process, motor skills, logical thinking will definitely develop, and fantasy and creativity will reach a new level.

Instructions on how to make a do-it-yourself spinner

Mentally, the whole process of creating a spinner can be divided into four stages: thinking through the design of the toy, drawing up a drawing and diagram, preparing necessary materials and direct work on the product.

Each stage is important, so let's look at them in more detail.

Step 1 - Thinking over the model

Here you need to decide what your future spinner will be: classic or unusual, paper, plastic or iron, simple or complex, and so on.

Based on this, an algorithm for further actions will be built.

Step 2 - Making a drawing

You can’t count on the eye, so it’s better to display your imagination on cardboard and remember your drawing skills.

If you don’t like working with pencil and paper, then go the easy way and look for ready-made schemes on the Internet, print out the one you like and start preparing materials.

Step 3 - Gathering Everything You Need

The materials from which you can build a spinner are striking in their variety, which allows you to choose the most suitable option. So, the basis can be paper, cardboard, electrical tape, chips, coins, solid wood, the children's designer or soda caps.

“Tools” will help in translating fantasy into reality:

Bearings;
Scissors or stationery knife;
Pen, pencil or felt-tip pen;
Adhesive suitable for the type of material;
Jewelry (rhinestones, gouache, stickers, etc.);
Devices for working with wood (centimeter, hacksaw, electric jigsaw, chisel, sandpaper, drill, etc.)

The bearing can be removed from an old skateboard, bicycle of non-functioning equipment ( washing machine, printer, fan) or buy in a store where its price usually varies between 20-50 rubles. The diameter of the part is proportional to the size of the future toy, and a value of 2 cm is considered universal.

It is important to properly prepare the materials in order to enhance the capabilities of the product. So, bearings bought in a store should be removed from factory grease, since it is harmful for a toy: it stains hands and slows down rotation.

Foreign plaque is removed simply: dust rings are removed, the bearings are filled with gasoline to an unnecessary container and left in the liquid for several minutes, during which it is recommended to shake them.

Step 4 - Getting Started

When the choice is made and the tools are assembled, you can get to work. Below are the simplest and lightest designs of spinners, having understood the structure of which, it will not be difficult to improve the technique with other materials.

Note!

paper spinner

In the simplest model of a turntable, the bearings are replaced with an axle, and the solid body is replaced with paper or cardboard. Making a paper spinner is easy and fast:

Prepare two paper squares 15x15 cm (preferably different colors), a toothpick and clip caps from the cap of the pen;
Fold each square in half, then bend their corners obliquely;
Lay the two pieces on top of each other so that they are perpendicular
Bend the triangles inward as follows: first the right one, then the top one, then the left one, and wrap the bottom one under the very first one;
Pierce the middle with a toothpick, expanding the hole by 1 mm;
Fasten the rod with clamps on both sides of the axle and cut off the excess ends.

Cardboard spinner

Spinners without bearings also include cardboard products. For a three-blade model, we make a drawing of four circles in the shape of a triangle on cardboard, cut out two copies, as well as four smaller circles. On one half we place coins of suitable diameter and glue them, and fix the upper part on top.

With nail scissors we make a hole in the structure and similarly in two small circles.

We put 1 cm of a plastic rod into one of the circles ballpoint pen, fix it with glue, put the rod into the spinner and close it with the second circle. The remaining third and fourth circles are fixed from above.

Bearings and bottle caps

A more complicated version is a model assembled from covers from plastic bottles(from 4 to 7 depending on the number of blades) and four bearings.

Note!

You will also need tools: glue gun, drill, knife, sandpaper.

The technology looks like this:

We grind corks with sandpaper to remove bumps and roughness;
We cut a hole to match the bearing in the axial cover;
We place the remaining caps around the center at the same distance from each other (for greater accuracy, it is recommended to use additional caps or a paper drawing);
We glue the corks together, not forgetting about smooth transition between them and the central cover;
We insert the bearings into the remaining covers, fix them inside with a layer of glue;
We decorate and decorate the product.

Spinner cleaning

Instead of making or buying a new spinner, you can always fix the old one.

Failure is usually of two types: damage to the housing and contamination of the bearing.

In the first case, any super glue will come to the rescue, you can clean the metal ball with WD-40 and alcohol, not forgetting to eventually lubricate the bearing with synthetic oil. In general, the following algorithm should be followed:

Disassemble the toy, fixed with a thread, by fixing the lower part and unwinding the upper one.
If the lid is fastened with magnets, then you should pick up the top with a thin object through the visible joint and lift it up.
Release the bearing by easily removing the plastic or metal baffle.
If the part is fixed with sealant, then it is not necessary to chip it off and get it out. In such cases, the entire body is cleaned with isopropyl alcohol.
Pour the cleaner onto the balls and twist them with a toothpick or match to completely and evenly distribute the liquid.
Rinse the bearing, leave to dry, avoiding the ingress of lint and dust inside. You can use a hairdryer.
Lubricate the part with one drop of oil.

Everyone can make a spinner at home, because its device is clear and simple, and any available materials can serve as a body and a rotating rod.

Note!

It's better to start with paper models, gradually improving your skills, and who knows what functions and features you will enrich your toy over time?

Photo of modern spinners

Teenagers, children and older people have a fashionable twist toy today - especially the ever-tiring and tense "office plankton". The spinner is designed to relieve stress, occupy a person for a while, distract from sad and heavy thoughts, and at the same time train "sleight of hand". Today - at the peak of popularity - a spinner can be bought in almost any store. But you can also make a twister with your own hands from improvised materials and various garbage. It won't take much time and effort.

What is a spinner?

To understand what to start, you need to understand what a spinner is and “what it is eaten with”.

A fashionable toy has many names: spinner, hand spinner, fidget spinner, hand spinner. It is a figure with three blades located radially.

In the center is a metal bearing holding them.

The toy is made of materials such as titanium, copper, brass, stainless steel, plastic. Depending on the material and design of the spinner depends on the speed and duration of its rotation, the vibration of the sound that comes from it.

The spinner was invented in the 90s of the twentieth century, but gained popularity only in 2017. At first, a funny spinner went around all the schools of the world - students performed various tricks with a spinner during breaks. They were even banned from American schools on the grounds that spinning games distracted children from their studies and prevented them from concentrating.

Then the "wonder-twist" crawled into the offices. Some believe that it can help you concentrate or, on the contrary, relax, as, for example, a spinning top or a yo-yo helped before. Forbes called the spinner "the must-have office toy of 2017."

To "be in trend" - you need to have it. So let's get to work!

Easy ways to make a spinner from improvised materials

Experienced life hackers have long come up with ways to make a spinner from what is at hand. All materials are used, what elementary things, like cardboard, plastic caps (from soda), buttons, coins.

Despite the fact that the price of a toy does not exceed a few dollars (the average cost in Moscow is 250 rubles), craftsmen do not stop trying to create something creative “of their own”. Again, "so that I can eat my hands."

Spinner made of plastic caps

This is a simple craft, which, however, will require some effort and diligence.

The work will need:

Four covers.
Glue stick and gun.
Plasticine or kinetic sand (if available at home).
Toothpick.
Nail or needle.
Lighter
Scissors.

Sand or plasticine is alternately placed in three bottle caps - to the top. This is done so that the blades are heavy, so the turntable will spin.

The remaining space must be carefully filled with a glue gun.

A hole is made in the remaining lid (using a heated knitting needle or nail) - exactly in the center.

Then three petal covers are laid out around the base with a hole. There should be the same distance between them. How to check? Put another similar cover between them.

All three parts are glued with a glue gun.

Two pieces of 1 cm each are cut off from the glue stick. One is put on the base of the toothpick, it is passed into the center of the toy. The second end also needs to be "secured" with a rod.

The spinner can be beautifully decorated, for example, painted with acrylic paints, they fit well on plastic. homemade spinner ready!

step-by-step instruction

Cardboard spinner without bearing

For the manufacture of this toy, again, materials that are difficult to work with or those that cannot be found will not be required.

Necessary:

cardboard;
spinner template;
3 coins;
glue;
rod from the handle;
awl;
decoration materials (paints, rhinestones, etc.)

The most difficult thing is to find a ready-made spinner template. This can be done on the Internet, or you can draw it yourself using a marker and the same plastic cover (or a coin, or a button) - just lay them out side by side and circle them.

For work, you will need two pieces of cardboard.

You will also need 4 smaller circles (for example, circle a coin of a smaller denomination).

Coins are attached to one of the templates with glue - each on its own blade. These are weights. They should be slightly smaller than the diameter of each circle.

From above, the coins are coated with glue and a second blank template is glued.

A hole is made in the center of the resulting cardboard spinner. It is necessary to insert the rod from the handle into it and cut it off - 1 cm is enough.

In two circles of smaller diameter, a hole is also made.

The other two remain untouched.

Before proceeding with the final work, the toy must be painted. fit conventional paints- watercolor, gouache - or markers.

You can show your imagination and make a bright model out of a turntable, for example, matching the color to your favorite super-heroes.

Can be used for decorating rhinestones, Velcro and other elements. They sit on the glue, but should not interfere with the game with the turntable.

How is a spinner collected? A rod is inserted into one of the small circles. It is necessary to coat its base with glue, insert it into the hole in the toy and press it on top with a second circle.

The remaining two circles are attached outside so that the rod is not visible, and the toy lies comfortably in the hand.

Spinner is ready!

step-by-step instruction

There are many other options for making a spinner at home, but the ones presented here are the simplest. Even a child can cope with such a task.

Conclusion:

Spinner is a trendy anti-stress toy today. To be in trend, you can make a turntable with your own hands. This does not require money - all the materials can be found at home - just a little free time.

If you are reluctant to buy spinners in the store, feel sorry for hard-earned money, too lazy to wait for delivery, or just a creative impulse plays in your soul, then you can try to assemble the turntable yourself.

With even hands, the toy will turn out no worse, and often even better than the purchased one - after all, you put a piece of yourself into it.

How to make a do-it-yourself spinner

1st method: we make a spinner from bearings

We need bearings, for example, from a skateboard. Before using the bearing in practice, it is necessary to clean it of grease, otherwise the turntable will rotate quietly, but not for long. This method is very simple, since you do not have to make a spinner body, all we need is four bearings.

They need to be decomposed into correct form. In order to make this form accurately, use a squared notebook sheet. After we have a perfect triangle, we glue the bearings together with glue - best of all, superglue or cold welding.

Or you can draw a circle with a compass and divide it into 3 parts, like a Mercedes badge. Drawing and geometry lessons to help.

When the glue is dry, it is necessary to increase the bonding area, for this we sprinkle the glue with salt, then the area will increase and the bearings will hold each other better. At the end, we wrap the gluing points with any thread and impregnate it with glue, this will betray even more strength.

A few video instructions on how to make a spinner from bearings:

And another option without a rope:

2nd method: spinner with clamps

For the next method, we need two ties or clamps. They need to be inserted into each other. After that, we place three bearings in the center of the ties and tighten the ties until they are firmly held.

Cut off the protruding ends. In principle, at this stage, the spinner is ready, but it does not hold firmly. In the event of a turntable falling, everything will fly out of it. We don't need this, of course. Therefore, it is necessary with the help of glue to make it more reliable. In all places where the bearings interlock, where the ties touch the bearings, it is necessary to drip with glue.

Such a spinner, due to its high degree of gravity, spins for less time and not so fast, but it is easier to manufacture.

You can see in more detail how a spinner with ties is made in the video:

How to make a spinner without a bearing

We need: six plastic caps from bottles, a toothpick, a large core from a gel pen, coins and glue.

To begin with, we take one of the covers and make a hole in it, using a burner or soldering iron, on extreme case hot metal nail.
Now we cut off a small part from the rod, about a centimeter long and paste it into the cork.
After that, we take two more plugs and cut off the upper part.
Then we take a toothpick and cut off the sharp ends so that a stick remains, about three centimeters long.
Using glue, glue it to the top of the cork.
After that, we pass it through part of the rods and glue the second cork. The middle plug should spin easily.
In the end, it remains for us to glue the remaining three plugs.

To understand what we are talking about, watch the video where there will be step-by-step instructions on how to make a spinner from plastic bottle caps:

As a result, we already have a pretty good spinner, but in order for it to spin even better, it needs to be weighted. For this we will use coins. We take a coin and glue it to each of the corks. That's all, our spinner is ready.

How to make a paper spinner

1st way: from cardboard

We make a template for a spinner from cardboard using a plastic bottle cap.

We circle it so that we get a triangle. We connect the circle with the rest of the circles with smooth lines and cut it out.
We put the finished template on cardboard, circle it and cut it out.
We also need four more circles of a smaller size, we make them.
Now we need coins. We take them and glue them on the sides of the first half of the spinner, and glue the second half on top.
Using nail scissors, make a hole in the center of the spinner.
Next, we need to cut off about a centimeter of the rod from the handle, and make small holes in two small circles.
All the details are ready, now you can paint our spinner with paints to give it a more beautiful look.
Now we assemble our spinner from the resulting parts. We insert the axis into one circle and glue it, put it into the spinner and press it on the other side with another circle.
Glue the remaining two circles on the sides. That's all, a homemade paper spinner without a bearing is ready.

For details, watch this video:

2nd method: paper spinner

To make such a spinner, we need two square sheets of paper and two pushpins. The assembly diagram will look like this:

We advise you to immediately watch the video, otherwise the instruction may seem too complicated:

We fold the sheet in half, then open it, like a book, we bend both sides of the paper to the bend.
Next, we fold the resulting rectangle again and get an even smaller rectangle.
We fold the resulting figure in half to make a bend. Then we open it and put it vertically.
We take from the lower left corner and bring it to the right side. You should get a figure similar to English letter L.
We repeat the same with the other part of the paper, only now we bend it to the left side.
From the resulting figure, we bend each corner so that we get two triangles at two ends.
We make a rhombus out of the resulting one, run our fingers several times along the bends and open it back to the previous figure.
We repeat the same with the second sheet of paper, only at the fold stage we do the folds in the opposite direction.
We connect the two resulting figures together. We put the ode vertically, the other, on top, horizontally. We fill the corner of the vertical figure into the corners of the horizontal one. As a result, you should get a figure that looks like a shuriken.
Now we make a hole in the center of our star, using a pushpin so that it can spin with ease.
Now we take the second button, heat the iron tip and take it out. We put on the remaining cap, on the other hand. Spinner is ready.