Content:
Sheathing of walls, ceilings and other elements of the internal living space of a country house or apartment with natural wood finishing materials is, firstly, an opportunity to give the space of the house a special decorative effect and, secondly, to protect them from mechanical influences and excessive moisture.
During the interior decoration of the walls of the house between the crate and the finishing surface, as a rule, a multilayer structure is laid, which has protective, sound and heat insulating qualities.
The invaluable advantages of natural wood as a cladding material for exterior and interior decoration of a house make it possible to consider this material almost indispensable in many respects. In this article, we will consider and compare interior decoration options, dwelling in detail on their advantages and disadvantages.
Despite external associations with the lining described by us above, it is practically a new European “invention”. This finishing material differs from lining in a number of tangible advantages. The first is compliance with strict European (primarily German) quality standards, which in itself is a convincing argument in its favor.
The quality of eurolining and the level of environmental friendliness of technological processes are controlled at almost all stages of its production, and even earlier - starting with the choice of wood. Wood is mainly used as a raw material for the production of eurolining conifers trees, often purposefully grown. But, even with such strict control, eurolining is divided into classes - the first, second and third.
Distinguish eurolining from standard lining and exceptionally accurate geometric dimensions of the surfaces, which allows assembly with minimal tolerances. As a result, both the finished surface and its individual fragments are distinguished by a very high decorative effect. In addition to the noted advantage, eurolining is additionally equipped with a system for removing moisture and ventilation in the form of a furrow specially provided for this purpose. This solution allows for increased durability both the lining itself and the main wall of the house. The skewing of the skin is also excluded, due to the swelling of wood fibers in rooms with high humidity.
The perfectly smooth and pleasant to the touch surface of the eurolining is covered with special compositions at the production, which allows not to carry out its additional processing with paintwork materials, as is the case with ordinary lining. At the same time, the texture of the wood, unique for each species, remains the focus of the “spectator”.
Today it becomes a matter of special pride for the owners of elite houses, cottages, restaurants. Thanks to its unique decorative properties and composition, high-quality eurolining creates a healthy microclimate, comfort and special cosiness in the house.
 |
 |
 |
When the walls and ceiling are ready, decorated and breathe freshness, cleanliness, having a pleasant pastime with a cup of fragrant herbal tea, as it turns out, it’s too early to relax - you should think about flooring! Of course, in the best traditions of lovers of a healthy lifestyle, the flooring should also be natural, that is, wooden.
This is a molded product, tongue-and-groove on both sides, manufactured on modern high-precision woodworking equipment from selected boards of both tangential and radial cuts. The moisture content of the finished quality product should not exceed 10%.
Belonging to the category of elite and most expensive natural materials for interior decoration of the house, a massive floor board has many advantages, the main of which are: a healthy microclimate in the house, warmth, comfort when walking, high decorativeness and durability. The last point deserves special attention, and the best proof of this is the European castles that have stood for more than 500 years and still delight tourists with "authentic" solid wood floors.
Given that modern technologies wood drying and the use of valuable wood species in the production of massive floor boards today make it possible to obtain a product with unique performance characteristics. Such a massive board "breathes", i.e. it reacts sensitively to changes in humidity in the premises, actively absorbing its excess and thereby "optimizing" the microclimate in the room. To the long list of advantages of a massive floor board, one should add low thermal conductivity, high soundproofing qualities. A massive board is connected according to the tenon-groove principle, which allows for high-quality installation quickly and accurately.
The modern finishing coating massive floor board is made in accordance with the requirements of Russian and European standards. Along the entire length of the board, sawing of a “bevel” is allowed, which gives the finished coating originality and special expressiveness.
One of the main advantages of a massive floor board is the possibility of multiple updates. Since the thickness of the working layer lies within 12 - 45 mm, then it is allowed to grind the board, respectively, at least 15 times. Very popular in production wooden board the floors are Siberian larch and Angarsk pine. In order for a massive board to serve you faithfully for many years, you should take into account the requirements for impact protection, moisture, heat and sound insulation. Will greatly contribute to this right choice substrates. An excellent option is the Kraiburg underlay, which can significantly improve the wear resistance of the laid solid board, smooth out the micro-roughness of the base, and therefore significantly improve and extend the life of the coating.
Solid wood flooring looks best in large areas, especially where there is sufficient natural light. The service life declared by the manufacturers - at least 100 years - is enough for our century!
Wooden block - house in interior decoration
Amazing decorative properties, reasonable price and environmental neutrality of the block - house determines its popularity as a practical and easy to care for. finishing material. for both exterior and interior decoration. As a material for the production of a block house, various types of wood can be used, but the most common are, of course, pine and Siberian larch. The high degree of drying of block-house wood guarantees its durability and resistance to cracking, warping and other deformations. The block-house made of cedar, birch or linden looks very decorative.
Mounted in your home block house devoid of the shortcomings characteristic of a log house made of logs, in particular, spoiling the decorative appearance longitudinal cracks. Impregnation with antiseptics and flame retardants allows you to achieve improved performance.
Walls made of brick, foam concrete, concrete and other undecorative surfaces after finishing with a block house look simply amazing. The low cost of a block house makes it possible to use this unique finishing material both for finishing private houses and cottages, and for interior decoration of cafes and hotels decorated in country style. Block-house panels used for interior decoration are smaller in thickness and width (20mm x 80…90mm, respectively) than panels used for exterior decoration. In the corners, individual panels are joined with special corners, which allows you to create the feeling of a solid facade.
All lining goes through the same production cycle, and only at the final stage of sorting, it is divided into grades according to external characteristics.
- grade "A" allows the presence of knots light color;
- grade "B" allows the presence of "lifeless" knots of dark color.
In this case, fallen knots and visible defects are not allowed.
The high concentration of resin and the hardness of larch wood make it very difficult to process, but in return give ready product unique operational and environmental characteristics. The atmosphere of the house, the walls of which are covered with larch finishing material, is saturated with phytoncides - substances that have a beneficial effect on the lungs, cardiovascular and nervous system hosts and guests of the house. Block - house made of larch is strong and durable, the quality of the best block - house class "Extra" meets European standards.
Finishing a house with imitation timber
- a molded product, a type of lining, actively used today for internal and exterior finish houses, saunas, baths, apartments. Imitation of timber is not only a spectacular finishing material that allows you to create a feeling of comfort and coziness in the room, but it is the material that allows you to completely transform the space of the house with minimal means. Such cardinal changes will not require a global restructuring of the building, the transfer of walls and partitions.
The choice of wood for interior decoration
Tree different breeds- a perennial favorite exclusive design interior, and is great for use in creating both modern and traditional styles. Among hardwood oak, ash, walnut and maple are valued; among conifers, pine, spruce, cedar and mahogany will be an excellent choice. The first thing that is required of you, regardless of what finishing material you use, is to decide in favor of hardwood or softwood. The question is not as simple as it seems at first glance, and for a qualified answer to it, it would still be better for you to contact your architect or contractor.
- Availability of a particular material;
- How ready is the type of wood you are interested in for the processing you need;
- How difficult will it be to care for such finishing coating;
- To what extent the selected option meets the requirements for wear resistance imposed by operating conditions.
Approximate prices for interior finishing materials
Some types of work:
- Installation of lining - 300 rubles. / sq.m.
- Installation of a block house - 400 rubles. / sq.m.
- Installation of timber imitation - 400 rubles. / sq.m.
Estimated cost of finishing "turnkey" wood
Room size 15sq. m. With a ceiling height of 2.5 m - 1630 rubles / sq.m. Finishing price includes:
- lining the ceiling and walls with clapboard;
- installation of floor and ceiling plinth;
- sheathing with clapboard slopes of windows and doors;
- installation of a log and a floorboard flooring.
Interior decoration of the house with natural wood materials is an excellent investment in healthy lifestyle life, the opportunity to surround yourself with elements of style created and honed by the most perfect designer of all - nature itself.
Interior and exterior design made of wood always looks beautiful, environmentally friendly and safe. The tree allows you to give uniqueness to the premises, add zest, fill with a pleasant aroma, insulate and protect the house from excessive moisture. In this article, we will talk about the types of wood finishing materials, the advantages and disadvantages, and also help you choose the right material for interior and outer skin Houses.
Types of materials and scope
Wood products are widely used for both interior and exterior decoration of the house. Wood is used for cladding:
- walls;
- facades;
- floor covering;
- stairs;
- internal and load-bearing partitions;
- window, doorways;
- individual elements decor.
Finishing materials made of natural wood are able to create an excellent microclimate in the room, as well as perform the function of sound and noise insulation, hide defects and emphasize the individuality of the interior. The construction market offers a large selection of wood-based materials. The following materials are used for interior and exterior decoration:
- block house;
- lining;
- decking;
- decorative wallpaper;
- wood panels;
- parquet and floor board;
- glued timber;
- gusvarblok;
For internal or exterior finish At home, deciduous trees are most often used: ash, oak, walnut or maple. But from conifers, as a rule, they choose pine, cedar or mahogany. To make the choice easier, you can use the product evaluation criteria:
- the availability of the material;
- the complexity of product care;
- what degree of material processing will be required during its installation;
- compliance of the material with the requirements of wear resistance and operating conditions.
In any case, before you buy facing material, you should learn about each product in detail.
Characteristics of facing materials
Wood-based materials provide the perfect finish various designs concrete, metal or brick. For interior decoration of the ceiling and walls, coniferous trees are most often used, for flooring and stairs they use solid wood, but for exterior decoration, a tree with high density and resistance to the external environment is used. Consider the characteristics of wooden products.
Block house
Block house is one of the subspecies of lining, the appearance of which looks like a rounded log. The product resembles a log house and is used for interior and exterior works both as a main material and as a decoration for individual elements. The main advantage of the block house is:
- durability;
- high thermal insulation and sound insulation;
- high strength;
- ease of installation;
- fire resistant due to special processing flame retardants and antiseptics;
- shock resistant, not deformed.
clapboard
Is economical and the best option for home decoration. In production, tree species are used: pine, spruce, oak, alder, linden. The main advantages of the material include:
- long service life;
- high resistance to mechanical damage;
- ease of installation;
- high sound insulation;
- the possibility of applying painting or toning.
But among the shortcomings, the possible appearance of insects and fungus can be noted. The photo shows the clapboard lining of the attic.
Important! To protect the tree from the attack of rodents and insects, it is necessary to exclude the presence of gaps when laying. The resulting free space is filled mineral wool, which is also capable of performing the function of additional sound insulation.
decking
- loggia or balcony;
- terrace.
The use of decking will allow you to perform finishing and decorative works. The material is stable, not afraid of open space, resistant to mechanical damage and scratches. Care terrace board quite simple and consists in wet cleaning. An example of laying decking on the porch of a house
Decorative wooden wallpaper
Decorative wallpaper for walls is made from precious wood. In addition to wood, they contain veneer, which is carefully glued to thick paper. The advantage of wallpaper is the possibility of pasting them on the radius sections of the room.
For information! For long term operation, wooden wallpaper must be treated with wax, varnish or oil. Wallpapers are able to change their color and size (swell) when hit by direct sun rays or water.
Having completed the decor of the room with the help of wooden wallpaper, the room will wear a chic and original look. An example of an original living room decorated with wooden wallpaper
wood panels
In the production of panels, tree species such as: alder, maple, cedar, oak are used. Wall decoration made of wood looks elegant, unusual and noble. The panel has three layers with a veneer face made of wood valuable trees. To give an effective appearance and increase the service life of the panels are coated with a special wax or acrylic varnish.
For information! Wooden panels waxed are considered the most environmentally friendly in contrast to acrylic processing. Experts recommend using waxed panels for wood wall decoration in a children's room or bedroom.
There are also tinted panels; in the manufacture of such wall panels, wood is used from solid pine. Such material is quite simple to install and has a lower price. It is not difficult to take care of the panel; ordinary wet cleaning is enough without using chemicals. The photo shows the interior of the living room made using wood panels.
Parquet and floor board
Floor boards and parquet are used for interior decoration and flooring made of laminate, parquet and other materials. Such material requires a carefully flat surface to work with. Thanks to the large selection of drawings, color palette and product invoices floor boards pairs well with various design solutions. The photo shows a living room decorated in scandinavian style using floor board
Important! Board or parquet will last longer if you choose the right substrate and carry out proper care behind flooring.
Glued laminated timber
Glued laminated timber is a versatile material. It is widely used for outdoor cladding of houses, as well as for internal works for the construction of architectural elements of the structure. It is used for the device:
- ceiling beams;
- railings and openings;
- decorating stair railings;
- decorative partitions.
Glued laminated timber is a fairly durable material, resistant to damage and not afraid of deformation or cracking. The photo shows a house sheathed with glued laminated timber
Gusvarblock
This modern material, which has a huge amount various kinds profiles (more than ten thousand) and able to blend perfectly with any interior. Gusvarblok panels are easy to join and install, and hidden connection allows you to assemble correct drawing. The advantage of the product is:
- environmental friendliness;
- high quality sound and heat insulation;
- simple care;
- long service life.
For information! It is impossible to mount wood products immediately after their purchase, they must acclimatize a little. The material should “rest” for about a week.
Manufacturers have taken care of a large selection of finishing materials for interior and exterior decoration of the house. Finishing wooden crafts have a large selection of color palettes, textures, shapes, allowing you to fulfill any design decision.
Before you make a choice, remember that the walls of the house take up a large area, unlike the flooring. Therefore, it is very important to perform high-quality and beautiful finish, which will emphasize the style of the room and give it a special personality.
The interior, made of wood and other natural materials in an eco-style, is certainly one of the most sought after today. This is not only a tribute to fashion, but also an understanding that it is the most healthy and close to nature way of organizing a room.
Sheathing floors, walls, as well as other elements of the interior space with natural wood finishing materials is designed to make the room attractive, insulate and protect it from excessive moisture.
When finishing natural wood inside the house, between the crate and the finishing surface, a multilayer structure with heat-insulating and sound-proofing qualities is usually placed.
Benefits of wood finishes
When grown in ecologically clean areas, wood is one of the cleanest materials for finishing the interior of a home.
Cosiness and comfort in the house
Wood can be used for any surfaces inside the house and serve as a material for:
- walls;
- gender;
- ceiling;
- flights of stairs;
- floors;
- door structures;
- window frames;
- decorative elements.
Wood trim is able to create a special healthy microclimate in the home, in which all life processes proceed normally: sleep well, work, breathe. Unlike artificial materials that emit harmful fumes, the tree does not cause headache, as well as a feeling of chronic fatigue and is able to neutralize the harmful effects of other materials.
The tree reduces dampness in the room, prevents the development of broncho-pulmonary diseases, as well as the appearance of mold and other consequences of excessive humidity.
The choice of wood for interior decoration
Before you start finishing work, you should decide on the choice of wood species. First you need to decide whether it will be softwood or hardwood. Here the criterion will be the operating conditions and requirements for wear resistance. For rooms with excessive humidity (baths, bathrooms, saunas), coniferous wood should be chosen. And well-ventilated ordinary rooms can be decorated with hardwood (alder, oak, linden).
Choosing the right material for the job clapboard
Clapboard is a collective concept that combines all finishing materials equipped with a locking system. Fastening is carried out by the tongue-to-groove method and can be "butt" or "overlap".
A feature of the use of this material is its exceptional ease of installation, which allows you to complete the work on the interior decoration of the house in a short time. Having information about the area and shape of the room that is planned to be sheathed, you can accurately calculate required amount lining.
The material has practicality, versatility and high decorative properties, thanks to which it is perfectly combined with any design direction. Sheathing clapboard can be carried out in the vertical and horizontal direction.
Lining with proper care and attitude can last a very long time. Its popularity only grows over time, not yielding to more modern finishing materials. In its production, carefully dried wood is used, both with a smooth and untreated surface.
The advantages of lining:
Practical and versatile material - naturalness;
- environmental friendliness;
- nice smell;
- unique appearance;
- hygroscopicity;
- ease of installation;
- availability;
- durability;
- thermal insulation and sound insulation.
Flaws:
- the possibility of deformation;
- sensitivity to temperature changes;
- swelling from exposure to moisture.
The quality of eurolining production is strictly controlled at all its stages. For its manufacture, raw materials of the highest grade are used, obtained from coniferous wood, often grown specifically for this purpose. Euro lining is divided into 1-3 quality classes and meets all accepted European standards.
The material is manufactured in accordance with European standards This material differs from ordinary wall paneling in precisely calibrated dimensions, as well as in the presence of a special furrow that provides ventilation and moisture removal. This design feature increases durability, prevents deformation and swelling of the lining when used in a humid environment. The excellent quality of the material makes it possible to assemble with the smallest tolerances. Thanks to this, the result of the work has a high decorative effect.
In conditions industrial production the surface of the eurolining is covered with a special composition, freeing the owners of the house from the need for additional processing with paints and varnishes.
Difference of eurolining from usual lining:
- much smoother surface;
- strict observance of quality standards;
- minimum humidity level (12% versus 15-28% for lining);
- polyethylene packaging;
- the presence of a special protective coating;
- larger spike size;
- the presence of a groove at the junction;
- more ventilation grooves.
floor board
There are two varieties: solid board and glued. The first option is made from a solid array, and the other is made from spliced pieces. In addition, the floor board is divided into grooved (having spikes and grooves) and non-grooved.
Wooden floor board options There is a regular board and euroboard. The latter is manufactured using a special technology on the latest equipment from high-quality raw materials in compliance with European standards. This board is quite expensive, but it is of high quality. She has smooth surface, perfect shape, low humidity and completely devoid of defects (holes, knots, blue). The massive euroboard is equipped with ventilation slots to avoid deformation due to load distribution, eliminate the risk of mold development, and also increase the service life.
Pros and cons of conventional solid wood floor boards
The material is environmentally friendly and easy to install Advantages:
- naturalness;
- environmental friendliness;
- speed and ease of installation;
- durability;
- the beauty of the material;
- low thermal conductivity, sound insulation;
- healthy microclimate at home.
Flaws:
- resin pockets are sometimes present;
- knots that reduce the quality of the board.
Also, one of the main advantages of such a board is the possibility of its repeated restoration. It can be polished up to 15 times, which extends its service life to at least 100 years.
In order for the floor board to last as long as possible, you should choose a suitable substrate and follow simple rules for caring for it.
This material looks very noble in large rooms with good natural light.
Wooden block house
This material is used for interior and exterior decoration. It is practical, comfortable, easy to care for, while it looks very decorative. All these qualities, as well as environmental friendliness and affordable price material make it popular among consumers. A high degree of wood drying eliminates deformation, premature damage and cracking of the material. Treatment with antiseptics and flame retardants prolongs its full use.
For the manufacture of a block house, a tree of various species is used, but the most used species are larch and pine. A block house made of linden, birch or cedar looks very decorative.
Affordable and environmentally friendly material Various unattractive surfaces, such as concrete or brick, after finishing works with the use of a block house look more than worthy. The feeling of a solid facade is created due to the fact that its individual elements in the corners are joined by special corners.
Block house made of larch wood has a beneficial effect on the nervous, as well as the cardiovascular system and respiratory organs, due to the release of volatile substances by larch wood - phytoncides. This property completely covers the inconvenience in the processing of this hard, resinous material.
Imitation of a bar will favorably highlight the most cozy zones This product is a spectacular material for interior decoration, which allows you to change the space of the house without drastic measures.
The material is not subject to deformation Imitation of a bar is made on special technology. First, it is dried for 8-12 weeks with special chambers until almost complete evaporation of moisture and destruction of pests. Then the finished boards are sorted and cut. Manufactured in a similar way panels are not subject to deformation, cracking, and also perfectly retain their original shape.
The assembly of the web from individual elements thanks to the tenon-groove system can be done by hand without special qualifications.
The cost of the product depends on the class and type of wood. The most popular materials are pine and spruce. They have a low price, and for some technical specifications even surpass more expensive species, for example, the same larch.
Imitation timber, like all natural wood products, has low thermal conductivity and perfectly saves heat in the room. If necessary, additional thermal insulation of the building can be made using layers of insulation placed between the finishing coating and the wall of the house.
Installation of wooden bars The variety of types of finishing material allows you to create your own unique design at home, and the richness of colors will help you choose it for almost any type of interior.
Interior decoration with wood is an excellent contribution to a healthy lifestyle, the opportunity to surround yourself with elements of ethnic style created by nature itself.
This is a board with a rough, rough surface, which is obtained as a result of thin sawing or milling. The paint clings to such a non-smooth surface better, so the paintwork lasts longer. Our warranty for this painted finishing board is 5 years.
Technological process Scandinavian board painting:
Priming Aqua Primer 2907 / Teknol 3881 (brush machine)
- Application of the 1st coat of paint Nordica Eco 3330 (brush machine)
- Application of the 2nd layer of paint Nordica Eco 3330 (brush machine)
When painting this facade board, the initial and interlayer grinding is not performed, so the cost of such a board is cheaper than painting a smooth, planed product, presented in the next section. Such is the paradox - the board is cheaper, but the durability is higher!
| Dimensions, mm | Painting | Price per m2 |
| Grade AB / C | ||
| ProfileUYV | ||
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
| ProfileUYS |  |
|
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
| ProfileUYL |  |
|
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
| ProfileUYW (sheet pile + planken) |  |
|
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
| Profileoblique planken |  |
|
| 21*145(130)*6000 21*145(130)*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
| ProfileUTF (simulated beam) |  |
|
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
| ProfileKM4R (straight planken) |  |
|
| 21*95/120/145*6000 21*95/120/145*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
| ProfileKM2R |  |
|
| 21*95/120/145*6000 21*95/120/145*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
| ProfileKM |  |
|
| 21*95/120/145*6000 21*95/120/145*4800 | Without painting | 540 rub. / 290 rub. |
| primed | 740 rub. / 490 rub. | |
| dyed | 1190 rub. / 940 rub. | |
| Buy | ||
This section of the price list presents products with a perfectly smooth painted surface of the board, the so-called "furniture quality". Previously, such a board must be polished on a calibrating-grinding machine, and then painted. Since in this case there are two additional operations: primary grinding and interlayer grinding, the cost of this finishing board is higher than that of Scandinavian.
- Packing through foam film and loading
To touch up the saw cuts (ends) of the board, LMB is provided (free of charge)
| Dimensions, mm | Painting | Price per m2 |
| Grade AB / C | ||
| ProfileUYV | ||
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| dyed | 1440 rub. / 1190 rub. | |
| Buy | ||
| ProfileUYS | |
|
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| dyed | 1440 rub. / 1190 rub. | |
| Buy | ||
| ProfileUYW (sheet pile + planken) | |
|
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| dyed | 1440 rub. / 1190 rub. | |
| Buy | ||
| Profileoblique planken | |
|
| 21*145(130)*6000 21*145(130)*4800 | Without painting | 540 rub. / 290 rub. |
| dyed | 1440 rub. / 1190 rub. | |
| Buy | ||
| ProfileUTF (simulated beam) | |
|
| 21*145(135)*6000 21*145(135)*4800 | Without painting | 540 rub. / 290 rub. |
| dyed | 1440 rub. / 1190 rub. | |
| 28*193(185)*6000 | dyed | 1640 rub. |
| Buy | ||
| ProfileKM4R (straight planken) | |
|
| 21*95/120/145*6000 21*95/120/145*4800 | Without painting | 540 rub. / 290 rub. |
| dyed | 1440 rub. / 1190 rub. | |
| Buy | ||
| ProfileKM2R | |
|
| 21*95/120/145*6000 21*95/120/145*4800 | Without painting | 540 rub. / 290 rub. |
| dyed | 1440 rub. / 1190 rub. | |
| Buy | ||
| ProfileKM | |
|
| 21*95/120/145*6000 21*95/120/145*4800 | Without painting | 540 rub. / 290 rub. |
| dyed | 1440 rub. / 1190 rub. | |
| Buy | ||
The technological process of painting planed products consists of the following operations:- Sanding or brushing (corresponding machine)
- Priming Aqua Primer 2907 / Teknol 3881 (spray)
- Application of the 1st layer of varnish Aquatop 2600 (gl/mat) / paint Nordica Eco 3330 (spray)
- Intermediate grinding (machine, grit P 220)
- Application of the 2nd layer of varnish Aquatop 2600 (gl/mat) / paint Nordica Eco 3330 (spray)
- Packing through foam film and loading
To touch up the saw cuts (ends) of the board, LMB is provided (free of charge)
| Dimensions, mm | Painting | Variety | Price per m2 |
| Profileoblique planken | |
||
| 20*140(125)*4000 20*115(100)*4000 | dyed | AB | 1890 rub. |
| A-Prima | 2190 rub. | ||
| Extra | 2590 rub. | ||
| Buy | |||
| Profilestraight planken | |
||
| 20*140*4000 20*120*4000 20*90*4000 | dyed | AB | 1890 rub. |
| A-Prima | 2190 rub. | ||
| Extra | 2590 rub. | ||
| Buy | |||
| Profiletimber imitation | |
||
| 20*140(135)*4000 | dyed | AB | 1890 rub. |
| A-Prima | 2190 rub. | ||
| Extra | 2590 rub. | ||
| Buy | |||
| ProfileTerrace deck board |  |
||
| 28*140*4000 | dyed | AB | 2040 rub. |
| A-Prima | 2540 rub. | ||
| Extra | 2840 rub. | ||
| Buy | |||
| ProfileTerrace board velveteen |  |
||
| 28*140*4000 | dyed | AB | 2040 rub. |
| A-Prima | 2540 rub. | ||
| Extra | 2840 rub. | ||
| Buy | |||
The leaders of sales in this section are lining and imitation of timber. Calm lining is often sheathed on ceilings, and imitation of timber is used for interior frame walls in timber houses.
In order to stand out and realize a non-standard design idea, we suggest you consider other interesting profiles. For example, an oblique planken or tongue-and-groove analogue of UYW, as well as a UYS profile for vertical finishing.
The technological process of painting planed products consists of the following operations:- Sanding or brushing (corresponding machine)- Priming Aqua Primer 2900 (spray)
- Application of the 1st coat of wax / varnish / paint Teknovax 1160 / Teknocoat Aqua 2550 (spray)
- Intermediate grinding (machine, grit P 220)
- Application of the 2nd coat of wax / varnish / paint Teknovax 1160 / Teknocoat Aqua 2550 (spray)
- Packing through foam film and loading
To touch up the saw cuts (ends) of the board, LMB is provided (free of charge)
In interiors, the use of an aged board is very popular, which is obtained by layer-by-layer application of paintwork materials on a brushed board. Please note that the cost of a simply sanded board and a brushed one is the same for us.
| Dimensions, mm | Painting | Variety | Price per m2 |
| ProfileClapboard calm |  |
||
| Pine-Spruce | |||
| 15*135(130)*6000 | dyed | AB | 1290 rub. |
| 21*145(135)*6000 | dyed | AB | 1390 rub. |
| Larch | |||
| 14*138(132)*4000 | dyed | AB | 1640 rub. |
| A-Prima | 1940 rub. | ||
| Extra | 2240 rub. | ||
| Buy | |||
| Profiletimber imitation | |
||
| Pine-Spruce | |||
| 17*145(135)*6000 | dyed | AB | 1290 rub. |
| 21*145(135)*6000 | dyed | AB | 1390 rub. |
| 28*193(185)*6000 | dyed | AB | 1590 rub. |
| Larch | |||
| 20*140(135)*4000 | dyed | AB | 1840 rub. |
| A-Prima | 2140 rub. | ||
| Extra | 2540 rub. | ||
