Painting the walls with old wallpaper. Is it possible to paint ordinary wallpaper with any paint

Despite the wide variety of finishing material on shelves construction stores, wallpaper remains the most popular and sought-after product for wall cladding.

But the same interior of the room quickly gets bored, and the dismantling of the old coating and gluing a new product are labor-intensive and costly processes.

To prevent the wallpaper from changing frequently, many designers and installers finishing works recommend using vinyl-based wallpaper. The question of whether it is possible to paint vinyl wallpapers, pops up by itself, and the answer to it is positive.

Vinyl wallpapers and their features

Vinyl wallpaper for painting is a reliable and versatile material that allows you to save time on decorating and replacing the cladding. Even 20 years ago, people re-pasted wallpaper in apartments almost every year. The reasons for this action could be different, someone was tired of the color, and someone accidentally smeared the coating, and all the work had to be done again.

Since the wallpaper was mostly paper, there were often difficulties both when coating the wall and when dismantling it.

The material is easily glued to the wall and can be painted

With the advent of vinyl wallpaper, the difficulty in carrying out installation work disappeared, since the material is easily glued to the wall and simply dismantled from the surface.

Many manufacturers immediately began to create not only wallpaper with a vinyl-based pattern, but also for painting. Initially, people did not have confidence in this product, and the question of whether vinyl wallpaper can be painted was often asked in all hardware stores.

After a while, all distrust of vinyl rolled products was gone, as the material has proven itself with better side as a reliable quality product with a long service life.

They are two-layer or three-layer material. The bottom layer is usually thick paper or interlining, and the top - polyvinyl chloride (PVC). The middle layer is a masking layer, thanks to which all surface irregularities are hidden. You can see a visual image of the composition of vinyl wallpaper in the diagram below.

Today, professionals in the finishing work distinguish 3 types of vinyl wallpaper:

Foamed. Great thick roll material which helps to remove all irregularities from the human eye wall covering And various defects surfaces. This cover can be either plain or embossed, have a preliminary color or be white or beige (for painting). Foamed wallpapers are subject to mechanical damage due to their structure (large PVC layer), so additional surface painting will not only give the new kind product, but also protect it from various scratches and contacts with any objects, creating a protective layer.
Kitchen wallpaper. Wall products intended for the kitchen have a high density, average thickness and a slightly embossed surface, since the material often gets dirty and needs to be cleaned. permanent care. The surface of kitchen vinyl wallpaper can be washed with water, removing all stains. If some soiled places could not be cleaned, the coating can be repainted. Any paint intended for interior decoration, easily falls on the wallpaper of this type.
Flat wallpaper. Only this kind wall material from the entire range of vinyl products is not intended for painting. Since ornaments of various colors are often applied to it, and if you paint the wallpaper in one tone, the whole type of product may deteriorate.

All types of vinyl covering, despite their distinctive features, have common characteristics.

Characteristics of vinyl wallpaper

Vinyl wallpaper is resistant to mechanical damage

Every interested person will ask the question: “How so different types coatings can have the same general characteristics?”, but this is true. Since different types of vinyl wallpaper are created by changing the thickness of the layers and the shape outdoor pvc- surfaces, and the composition of the material does not change.

Vinyl wallpaper has the following characteristics:

the excellent density of the material allows people who are unfamiliar with this process to stick the product, since the wallpaper is not enough to simply tear and damage;
not to be afraid of mechanical damage(except foamed wallpaper without color);
a huge selection of products with different relief;
wallpaper does not fade in the sun, like paper;
good indicators of moisture resistance. For more information about material properties, see this video:

Vinyl wallpapers are not without flaws. One, but a significant flaw is the non-air conductivity of the product, therefore, if you do not pre-treat the walls with an antiseptic composition or use non-specialized glue, mold will appear under the wallpaper on the wall.

Wallpaper painting and material selection

Use for painting water-based, acrylic or latex compositions

Before you paint vinyl wallpaper already pasted on the surface, you need to take care of the material and the tool with which this action will be performed.

To apply color to the surface, you will need a brush and a special painting container - a “trough”, where paint is poured in a small amount to wet the roller.

Paint for vinyl wallpaper can have a different composition, each type of coating has its own specific advantages. For painting vinyl wallpaper can be used: latex and acrylic paint.

If there are children in your room, then it is better to use water-based paints, which give a matte effect to the surface on which handprints do not remain. The use of latex and acrylic coloring compositions is advisable for large rooms. These paints dry quickly and give a glossy surface effect.

Face painting for everyone

To date, there are 2 popular options for painting vinyl wallpaper.

The traditional method is face painting, which is within the power of every owner. If the wallpaper is painted for the first time, then two layers of products should be applied at once, in further operation one painting will be enough.

Method 2 will seem unusual to many, but this method of applying paint is often used specifically for vinyl wallpaper. Its feature is the application of the composition with reverse side. Such an action is possible due to the excellent absorbent qualities of the first non-woven layer. This action will create a uniform blurry, not saturated color.

It can be made from 5 to 10 times, depending on the recommendations of manufacturers. It is customary to apply paint on wallpaper with a roller, and only in hard-to-reach places brush should be used. For more information about the secrets of the process, see this video:

Do not forget that specialized wallpaper for painting on a vinyl basis is cheaper than flat vinyl wallpaper with colored ornaments. They usually have a large width and require additional costs for paint and tools for its application.

From the above material, each person can draw conclusions for himself which vinyl wallpapers can and should be painted, and which ones are not worth it. But nothing is impossible, there are craftsmen who repaint flat vinyl wallpapers, stripping off the top color from colored ornaments, re-colouring them with a brush in a different color, but this process is very laborious, and the result is not always pleasing to the eye.

Water-based paint has many advantages: low cost, ease of use, environmental Safety and the possibility of self-coloring. Hence its widespread use in home repair.

We minimize labor costs

Let's say you want to change the wallpaper and paint the wall instead. From such experiments, many are deterred by the need to tear off old wallpaper, which can sit quite well. Is it possible to paint the wallpaper with water-based paint, thereby saving your own strength?

Just one of the advantages of water-based paint is that it can work directly on the wallpaper. The paper is well saturated with water, which ensures reliable adhesion of the ink to the surface and a high-quality result.

This, by the way, allows you not to worry too much about whether the paint will lie well on the wall surface - it fits perfectly on paper.

Restrictions

Of course, there are some subtleties, and they concern not only how to properly paint the wallpaper with water-based paint, but also the state of the wallpaper itself:

Wallpaper should sit securely. If they fall off, then nothing will prevent them from falling off along with the paint.
The presence of wallpaper does not deprive you of the opportunity to eliminate the identified defects with a primer or even plaster.
On the old wallpaper, you will have to apply more layers of paint (not 2, as on average, but 3 or 4). Water-based paint conveys the texture of the surface well, so defects and abrasions of the wallpaper can show through the coating. Extra layers will help to avoid this.
Wallpaper must be completely free of any contamination.

Operating procedure

Let's figure out how to properly paint the wallpaper with water-based paint:

Room preparation. Remove everything unnecessary, cover the floor with film or newspapers and open the windows.
Surface cleaning is one of milestones. Any interference between ink and paper will impair adhesion and result in uneven and unreliable coverage. At the same time, cleaning should be carried out using “dry” methods, otherwise the wallpaper can become unusable, and you will have to tear it off.
Paint preparation is carried out in the same way as when working on other surfaces. Paper absorbs well. water-based formulations, so the paint for the first layer can be made a little more liquid than usual. Thanks to this, the first layer is reliably absorbed, and subsequent ones will be easier to apply.

It is advisable to start painting from the top corner (the least convenient). Paint should be applied in an up-and-down motion, whether you use a roller or a brush. This will allow you to better manage smudges.
It is most convenient to apply the paint in parallel stripes with some overlap.
After completing the first coat, let the paint dry, and apply the second in the same way, only in the other direction (either from the bottom up or to the side). This time, it is worth making the paint a little thicker to reduce its flow and the likelihood of streaks.

Having figured out how to paint wallpaper with water-based paint, you can change appearance rooms beyond recognition without any extra work.

dekormyhome.ru

Wallpaper type

Before you start painting old wallpaper, you need to determine their type:

Paper simple. They require pre-treatment with a water-repellent mixture, and only after that it is allowed to paint with a small amount of paint, otherwise the wallpaper will billow.
Waterproof and dense. Painting is allowed immediately.
Vinyl, non-woven, fiberglass. Do not require a preliminary primer, painted immediately.

What paint is better to take?

If you decide to paint paper-type non-woven wallpaper with a convex curly pattern, you should choose a coloring matter on water based, in which binder components (organic and inorganic) are present. Widely used paints are acrylic, which have a number of positive properties: the indelible quality of the surface layer, water resistance, wide choose colors. If you want to choose a material budget option, it is permissible to take an emulsion composition based on PVA. It is worth considering that cheap coloring matter does not match the quality, it accumulates steam, the palette of shades is minimal.

Tips: The latex suspension as part of the binding components keeps well on curly wallpaper. With this composition, you can safely paint paper or duplex wallpapers. After its application, the canvas becomes glossy, does not fade in the sun, but, compared to acrylic, is erased faster.

Best Option for painting paper wallpaper is a water-dispersion paint. This kind of mixture is suitable for painting children's rooms, as it does not contain harmful components, being an environmentally friendly product. Such a coloring matter dries within an hour. In the process of painting work, water-dispersion paint does not emit a toxic odor.

The choice of water dispersion paint

Water-dispersion coloring matter is different. There are three main types of it: latex, adhesive and acrylic.

The choice of painting decor

Before repair work, you should think about the variety of shade and pattern. Among the painting options you can consider:

color combination;
mixing colors;
stencil drawing or pattern.

Creative ideas will help create an unusual, unique and original interior Houses. To separate strips of wallpaper before painting, it is convenient to use adhesive tape.

Painting process

Before starting repairs, you should remove the furniture and rugs from the room so as not to stain them with paint, which will be problematic to get rid of. It is necessary to isolate the sockets in the room, using a vacuum cleaner to remove dust particles from the surface of the relief pattern on the wallpaper. If there are peeled corners of the wallpaper, they need to be glued or cut off. Next, prime the surface important factor, which allows you to protect the canvas from the penetration of paint into the structure.

Tip: The primer will give strength to the wallpaper and contribute to less wear.

After the primer has completely dried, you can begin to paint the walls. To apply the paint evenly, you need to prepare paint roller with soft fur. Under the paint should take a plastic tray. A bucket or basin will not work, because after taking the paint with a roller, streaks will remain on the wall

For painting corner walls a wide brush is used. To get a rich color or combined shades, you need to add a couple of drops of color to the general composition of the emulsion. Strokes on the wall are applied in any direction, the main thing is that the layer is proper, without gaps and differences in shades. We carry out with a roller or a wide brush from left to right, heading from the ceiling to the floor. Each subsequent stroke should run a few centimeters over the previous one.

As you smear the paint applied to the roller, you should walk over the previous section to remove excess streaks. Applying one coat of paint to the wall is unlikely to be enough: after the first application, you need to wait a while and repeat the staining procedure.

The painting must be uniform so that the old color does not show through the new layer, otherwise the appearance of the wall will be spoiled. Dilute the coloring composition with water, if required by the instructions, mix until a homogeneous consistency.

Tip: Apply the emulsion perpendicular to the previous strokes.

To avoid spots of different colors, the paint should be quickly and evenly distributed over the area. It is better to paint the walls in parts so that it does not dry out and the transitions are visible. Re-staining is possible after 2-4 hours.

You can check the surface to be painted for gaps using a directional light source (lamp) on the wall. Drying of the paint occurs during the day, but it depends on the air temperature and humidity in the room.

To cover non-woven wallpaper evenly with the coloring matter, staining should begin from the outside. If there is a relief pattern, apply several layers of paint with wrong side for a richer color. With this application, the canvas will be saturated, the background will acquire the desired shade. Thin vinyl wallpapers are not suitable for painting. If they are non-woven, it will be difficult to paint them.

Paper canvases are suitable for staining with any composition. In this case, the surface primer will be insufficient, it will be necessary to pre-treat it with water-repellent agents.

Tip: The paint base used for paper wallpaper should be water repellent.

If the walls in the room are pasted over with ordinary wallpaper, which wrinkle after applying the primer, it is better to refuse the process of painting the wallpaper. If painting is done for the first time, in order not to waste the paint in vain and not to spoil the paper coating, it is better to invite a painter.

Any paint released for sale is accompanied by instructions on which you should navigate the breeding process for painting wallpaper on paper basis. Non-woven fabrics are able to transfer up to 10 stains. Paper type material can be deformed even after the first repainting. Foamed vinyl wallpaper will not take the coloring composition due to the repulsive reaction of the material. As a result, it turns out that you can paint old paper-type wallpaper rolls, the main thing is to purchase a high-quality coloring composition, a terry roller, a primer and a water-repellent agent, and everything will certainly work out.

ideikom.ru

Materials and tools for work

In order for the work to be done efficiently and with the desired result, it is necessary to prepare everything in advance, according to the following list:

Paint rollers in various widths and structures. To paint the surface with rollers is much faster than with brushes. Wool or mohair is best. The foam roller is not desirable, as it can slip on the surface of the wallpaper and leave a shiny mark behind when the paint dries. Rollers with pile, before starting painting work, it is necessary to soak for 1-2 hours in cold water so that the villi become soft and leveled. Before using the roller, squeeze it well and dry it.
Paint brushes (wide, medium and narrow). Where it is not possible to cope with a roller, brushes are used. The length of the hairs of the brushes, as well as the length of the pile of the rollers, must be chosen taking into account the depth of relief decorative coating wallpaper. The deeper the relief of the surface of the wallpaper, the longer the pile and hairs of the prepared tools should be.
Vacuum cleaner, brushes, sponge. All this will be needed when preparing the surface of the wallpaper for painting.
Paint mixing tool. A construction mixer, a drill with a special nozzle, or you can just use a smooth rail, etc.
A container for mixing paint and a paint bath for paint. If there is no paint bath, then it can be replaced with any other suitable container. Place a metal mesh or a piece of a steel plate in this container, you can plywood, with holes made in it in a checkerboard pattern (you will get a mesh with a mesh diameter of 12 mm and a distance between them of 25 mm). After the roller is dipped into the paint, it is necessary to roll it several times over this grid to remove excess paint.

Masking tape. It will be needed in order to protect skirting boards, electrical sockets and switches, etc. from unintentional staining.
Plastic film or thick paper. It will be needed in order to cover areas of the floor and other coatings that need to be protected from paint getting on them.
Ladder. For painting wallpaper on the ceiling, if any, and on the top of the walls.
Water repellent coating. It is necessary to protect the paper structure of the wallpaper from soaking, and as a result of this, possible damage and separation from the wall surface.
Dye.
If necessary, color for paint. Kohler is necessary if you want to give the paint a certain shade. colors. Shades can be chosen independently, or you can pick up in the store with the help of a specialist with a special device.
A small container (about 100 ml) for preparing a trial coloring composition from paint and color.

The choice of paint for paper wallpaper

When choosing paint, consider the following:

The paint can be different in terms of light properties (matte, satin, glossy and mixed properties). It is necessary to choose paint taking into account the type of wallpaper surface, lighting and the purpose of the room. To do this, remember that glossy paint will emphasize the existing imperfections of the walls, and they will become more noticeable. Therefore, glossy paint is suitable for rooms with dark, dim lighting. Semi-gloss paint - has a good reflective ability. Matte paint - masks surface defects, since it does not have a shine and can be used in large rooms. Semi-matte paint - has a slight gloss and blurs small uneven walls, it fits well into the sleeping area. Satin paint - has a smooth structure, increased wear resistance and durability. You can use satin paint in any, according to the purpose and illumination of the premises.
Will this paint give the painted surface properties such as moisture resistance (the ability to wash wallpaper), resistance to artificial lighting or direct sunlight, protection from mechanical influences and other necessary properties.
The time required for complete drying of one coat of paint.
Transparency (hiding ability). If the wallpaper is a bright color (or already painted with bright paint), then you need to know if this color will cover new paint completely or through it, the previous shade will shine through.
What is the basis of paint. There are alkyd, water or latex and acrylic paints. For paper wallpaper, paint on any basis is suitable. Alkyd paint creates on the painted surface protective film. This film gives moisture resistance and resistance to mechanical stress. However, if the surface of the wallpaper is not smooth, but embossed, then this film will cover the relief and it will smooth out, which will not allow the wallpaper to “breathe”. Alkyd-based paint is not environmentally friendly. Part alkyd paints includes toxic oils and resins, so this paint is best chosen for non-residential premises. For residential premises, paints with a water-dispersion composition are best suited (water-based paint and its more resistant to various kinds of influences, a variety - acrylic). These water-based paints are odorless, quick-drying and environmentally friendly. In addition, acrylic paint creates a protective layer on the surface to be painted, which is well resistant to moisture, direct sunlight, temperature extremes and mechanical stress.

Preparing to paint wallpaper

Before painting walls with paper wallpaper, it is necessary to prepare the surfaces and perform other necessary actions:

Remove all objects and furniture that will interfere with work. Cover the floor and those coatings that should not get paint with plastic wrap or other material prepared for this. Fix the film with masking tape.
Tape the skirting boards with masking tape, electrical sockets, switches and other necessary objects, devices and connectors.
Clean the surface of the wallpaper from dust, cobwebs and other contaminants. To do this, use a vacuum cleaner, dry brushes and a sponge.
Close all windows and vents in the room, turn off air conditioners and ventilation. Avoid drafts and temperature fluctuations. Moistened wallpapers may separate from the wall surface or air bubbles form under them.
Apply a water-repellent coating to the surface of the wallpaper. Use paint rollers and brushes for this. In hard-to-reach places, use narrow paint rollers for corners and joints, as well as paint brushes.
Dry the wallpaper until completely dry (drying time should be indicated in the instructions for use of the water-repellent coating). It is better to withstand before painting, after applying a water-repellent composition, at least 24 hours.
After the wallpaper is fully prepared for painting, start preparing the paint itself. Pour the paint into the prepared container. Stir the paint with a tool prepared for this until a homogeneous mass is obtained.
Perform paint tinting.

Paint tinting

You can do the tinting of the paint yourself. To do this, first mix the color with paint in a small container (about 100 ml) until a uniform color. Add color a little at a time (literally, drop by drop, you can use a medical syringe) until you get the desired shade. Write down the number of drops. Test paint on the area of the wall that you determine is suitable for this purpose. Try on the wallpaper area, where there is the main, for this room, lighting (artificial or natural). After the paint has dried, evaluate the result. When tinting the main composition of the paint, keep in mind that its color on the wall surface will be brighter than in the container. Use your notes to calculate the amount of color. If you added 10 drops of color per 100 ml of paint to prepare a test composition, then for the main color composition on the entire wall, you need to reduce this amount by 20%. That is, for 1000 ml of paint, not 100 drops of color, but only 80.

Now everything is ready and you can start painting the wallpaper.

Wallpaper painting

Wallpaper painting as the final stage must be done with special responsibility and care. To achieve the best result, you must adhere to the following tips and procedures:

Start painting the wallpaper from those areas that will be behind furniture or other furnishings. Thus, you will fill your hand and once again make sure that the chosen shade of color is correct and that the paint is successfully tinted.
Pre-paint with brushes such places where it is impossible to apply paint with a roller. Using paint brushes, blend the paint well until the desired layer and shade is formed. After that, start applying the paint with a roller.
Painting wallpaper is best done from top to bottom or from ceiling to floor. Otherwise, the paint may drip onto the already painted surface, thereby spoiling the result. If the wallpaper is present on the ceiling, then at first the wallpaper is painted there.
To apply paint, use a paint roller and a paint pan, trying to make uniform thin layers. Remove excess paint from the roller by rolling it several times over the grid of the bath before applying it to the surface of the wallpaper.
Roller movements along the wall should be from top to bottom, and then from bottom to top.
Strokes of paint must be applied so that each subsequent stroke overlaps the previous one by 2-3 cm. On a smooth surface, the paint must be shaded more carefully so that no visible defects remain.
On the ceiling, the paint must be applied in the direction of the light rays. If two or more layers of paint are applied, then the directions of applying the layers should be perpendicular to each other.
In hard-to-reach places (corners, window and door openings, etc.), use paint brushes prepared in various widths and rollers for corners and joints to apply paint.
Paint in several layers, depending on the desired effect. At least the paint paper wallpaper applied in two layers.
After applying each coat of paint, it must dry for at least 4 hours. Then you can apply the next layer.
Painting can be considered complete after the last coat of paint has completely dried, and you are convinced that the desired result has been achieved. The result must be evaluated under the lighting, which should be the main one.

sosedi-online.ru

Technology for painting old wallpaper

So, is it possible to paint ordinary paper wallpaper? It is possible, but infrequently and only after pre-treatment, since unprepared paper, the water in the paint will soak and deform.

Preparatory work

Instruction:

We take out all the movable furniture from the room, and cover the fixed one polyethylene film. At the same time, it is also desirable to protect the floor from accidental splashes of paintwork material.
We clean the surface of all kinds of dust and dirt with a vacuum cleaner or a damp cloth.

We glue the exfoliating areas. If the condition of such fragments is too deplorable, then carefully cut them off.

We cover damaged places and scratches with mastic, which we grind after drying sandpaper.
We prime the surface. This is the most important step that will protect the wallpaper from the penetration of paint into their structure. The primer will create a reliable polymer layer that reduces the porosity of the paper and protects the dilapidated finish from further wear.

After the primer is completely dry, you can start painting.

Paint selection

Is it possible to paint paper wallpaper with water-based paint? Even necessary. It is the most suitable suspension for restoration old finish walls.

To see this, let's look at its advantages:

Ecological purity. When hardening, only harmless water vapor is released, which is important when using the emulsion indoors.
Low price. It is achieved due to the absence of an expensive solvent in the composition.
Wide range of rich colors. Plus the possibility of mixing them for unique color solutions.

Moisture resistance. After evaporation of H 2 O, the resulting polymer film has a high water resistance.
High resistance to abrasion, impact sun rays and temperature fluctuations.
Fire resistance. For paper finishes, this is a great way to improve fire safety.
Ease of application. Does not form streaks and streaks.
Possibility of wet cleaning. Allows you to keep the updated coating clean.
Long service life. At proper care reaches ten years.

Application of the emulsion

We dilute the purchased mixture with water according to the instructions attached to it.. If a white emulsion is purchased, then we also add the necessary dyes, mixing everything with construction mixer Or a drill at low speed.

The resulting solution is poured into a special paint tray.

We dip the brush into the suspension and paint over the corners and other hard-to-reach places.

Then we take a roller for painting with a medium pile, collect the emulsion with it and draw it several times over the ribbed surface, getting rid of excess liquid.

Tip: if you have textured wallpaper for decoration, then it is better to take a tool with a long pile.
He will be better able to process numerous recesses.

Swipe the tool from left to right, descending from the ceiling to the floor. In this case, it is necessary that each subsequent strip runs a few centimeters onto the previous one.
At the moment the liquid in the roller ends, we run it along the already painted part of the wall in order to collect excess suspension from it.
We are waiting for the first layer to harden, after which we apply the second one perpendicularly.
R We check the result by bringing a bright light source close to the finish. So we can see the prominent spots.
If the check was successful, then we can safely enjoy the work done.

Conclusion

We looked at whether paper wallpaper can be painted and how to do it. First of all, for this it is necessary to carefully prepare the surface.

This includes:

cleaning;
restoration of deformed areas;
creation of a protective moisture-proof layer.

Next you need to buy water-based paint best suited for the task and apply it with a brush and roller. Follow the above recommendations and you won't have any problems.

The video in this article will give you an additional opportunity to get acquainted with a certain amount of information that directly relates to the materials reviewed. Painting is always easier and cheaper than a complete refinish.

There are different opinions about the advisability of staining old paper wallpaper. Indeed, in some cases, it is not even worth starting this process. If they are poorly glued, have significant damage received during operation, then painting will not replace gluing new ones.

If they look good, but their color does not match with new furniture, just tired or faded, then you can still wait with the replacement, and get by with staining.

Before proceeding directly to painting old wallpapers, it is necessary to determine the list of materials and tools that we may need in the process.

For painting glued surfaces you need:

Water-repellent coating that prevents the coating from getting wet, and as a result of its lagging behind the wall;
Dye;
Roller and brushes different sizes. The length of the pile on the roller depends on the relief of the surface to be painted. If the surface is smooth, then the roller should be with a pile of medium length;
Masking tape, which will be required to seal the baseboards, thereby protecting them from paint ingress.

In more detail, you should consider the choice of paint. They can be: satin, semi-gloss, glossy, semi-matte and matte. The choice depends on the type of surface and the lighting in the room. For example, for a kitchen smooth surfaces Semi-gloss paint is perfect, it will reflect light well and is easy to clean. And the matte finish will perfectly fit into the interior of large halls.

Also, when choosing a paint, you need to consider such characteristics as:

Resistance to light and mechanical stress;
The ability to overlap other paint so that it does not show through;
Complete drying time;
Possibility of washing;
Environmental friendliness.

According to the basics, paints are divided into:

Paints with alkyd base;
Water or latex;
Acrylic.

Before proceeding directly to staining, you need to carry out preparatory work. To begin with, we remove dirt, dust and cobwebs from the walls with a vacuum cleaner and a sponge. Then you need to seal all the skirting boards with masking tape.

After all this is done, you can proceed to the application of a water-repellent coating. Apply it better with a roller, and in hard-to-reach places and corners - with a brush.

After a water-repellent coating has been applied to the surface of the walls, it is necessary to maintain one temperature, avoiding its differences and not creating drafts. Failure to follow these rules will cause the wallpaper to peel off or air bubbles to form under its surface.

After the applied coating is completely dry (about a day), you can proceed to the next step.

The paint must be mixed until a homogeneous mass is obtained. If desired, you can add the selected color to it and mix thoroughly. Before applying, be sure to make sure that the paint is exactly the color that was chosen.

Paint can be applied to the prepared surface. This should be done with a roller, and in the corners with a brush. Paint should be applied in a uniform thin layer.

You should start painting from the walls that are covered with furniture, thereby exercising on them.

It is better to start painting from the ceiling so that paint drops do not spoil the already painted surface.

After the first layer has dried, which will take 3-4 hours, you can apply the second one.

After both layers have been applied and dried, the painting can be considered complete.

But if there is no experience in carrying out painting work, then in order not to experiment with quality, you can invite a team of professional painters who will carry out the work in a matter of days, and the room will shine with new colors.

The new wallpaper on the walls looks pretty nice and fresh. But over time, the look of paper wallpaper deteriorates, they fade, fade and even turn yellow. In this case, you have to update the interior with new wallpaper. But the task can be simplified and just paint them with paint. Only everyone wonders if it is possible to paint paper wallpapers.

Opinions differ on this issue. Some do not advise doing this at all, because after applying the paint, the wallpaper gets wet, gets heavier, swells, and can even lag behind the wall. Some on own experience prove the opposite. But for this you need to take into account the paint that will be applied. It is worth distinguishing between single-layer and multi-layer wallpapers.

It is for painting that multilayer ones are better suited, as they are more durable and moisture resistant. Paint on multi-layer wallpaper lays down much easier and more easily. Paper wallpapers can be painted with almost any paint, except for oil and facade paint. For non-residential premises, for example, for the kitchen, you can choose acrylic paints. They are more stain resistant and easy to clean. And for living rooms water-based paint works best. The colors of this paint can be mixed, achieving the desired shade.

And yet, is it possible to paint paper wallpaper and how to do it right? It should be noted that painting wallpaper is much easier than re-gluing them. It takes much less time and gives more pleasure from the process. Indeed, in our time there are paints that dry very quickly, do not flow and have no smell. A very important point when painting wallpaper is the use of a primer. It will not let the paper wallpaper get wet, which will make it easy to apply paint. When choosing a primer, you should consult with the seller in the store.

Before starting work, it is worth freeing the room from furniture or protecting it from paint ingress. Wallpaper should be cleaned of dust and cobwebs with a damp towel. Next, you need to hide the defects of the walls, that is, cover up the cracks and, if necessary, glue the wallpaper lagging behind the wall, as well as glue the baseboards and sockets so as not to stain them with paint. As a result, a primer is applied, after which it should dry with a tight closed windows and doors. For better application primer wallpaper should be treated with sandpaper. After the primer has completely dried, the wallpaper can be painted. To do this, it is better to use a wide brush or roller. If desired, you can apply a second, and even a third layer to achieve a more intense color and get rid of streaks. Paper wallpapers can be painted no more than 10 times, then they need to be changed.

Despite the quality and beautiful drawing, sooner or later the wallpaper loses its color, and the drawing becomes boring. Depending on the type and characteristics of roll wallpaper, they can be painted with any paint color you like. The main thing is that the coloring composition is fully consistent with the upcoming work.

Wallpaper type

Before you start painting old wallpaper, you need to determine their type:

Paper simple. They require pre-treatment with a water-repellent mixture, and only after that it is allowed to paint with a small amount of paint, otherwise the wallpaper will billow.
Waterproof and dense. Painting is allowed immediately.
Vinyl, non-woven, fiberglass. Do not require a preliminary primer, painted immediately.

What paint is better to take?

If you decide to paint paper-type non-woven wallpaper with a convex curly pattern, you should choose a water-based coloring agent that contains binders (organic and inorganic). Widely used paints are acrylic, which have a number of positive properties: indelible quality of the surface layer, water resistance, a wide choice of colors. If you want to choose a budget option material, it is permissible to take a PVA-based emulsion composition. It is worth considering that cheap coloring matter does not match the quality, it accumulates steam, the palette of shades is minimal.

Tips: The latex suspension as part of the binding components keeps well on curly wallpaper. With this composition, you can safely paint paper or duplex wallpapers. After its application, the canvas becomes glossy, does not fade in the sun, but, compared to acrylic, is erased faster.

The best option for painting paper wallpaper is water-dispersion paint. This kind of mixture is suitable for painting children's rooms, as it does not contain harmful components, being an environmentally friendly product. Such a coloring matter dries within an hour. In the process of painting work, water-dispersion paint does not emit a toxic odor.

The choice of water dispersion paint

Water-dispersion coloring matter is different. There are three main types of it: latex, adhesive and acrylic.

The choice of painting decor

Before repair work, you should think about the variety of shades and patterns. Among the painting options you can consider:

color combination;
mixing colors;
stencil drawing or pattern.

Creative ideas will help create an unusual, unique and original home interior. To separate strips of wallpaper before painting, it is convenient to use adhesive tape.

Painting process

Before starting repairs, you should remove the furniture and rugs from the room so as not to stain them with paint, which will be problematic to get rid of. It is necessary to isolate the sockets in the room, using a vacuum cleaner to remove dust particles from the surface of the relief pattern on the wallpaper. If there are peeled corners of the wallpaper, they need to be glued or cut off. Next, we prime the surface - an important factor that allows you to protect the canvas from the penetration of paint into the structure.

Tip: The primer will give strength to the wallpaper and contribute to less wear.

After the primer has completely dried, you can begin to paint the walls. To apply the paint evenly, you need to prepare a paint roller with a soft pile. Under the paint should take a plastic tray. A bucket or basin will not work, because after taking the paint with a roller, streaks will remain on the wall

A wide brush is used to paint corner walls. To get a rich color or combined shades, you need to add a couple of drops of color to the general composition of the emulsion. Strokes on the wall are applied in any direction, the main thing is that the layer is proper, without gaps and differences in shades. We carry out with a roller or a wide brush from left to right, heading from the ceiling to the floor. Each subsequent stroke should run a few centimeters over the previous one.

Tip: Apply the emulsion perpendicular to the previous strokes.

To cover non-woven wallpaper evenly with the coloring matter, staining should begin from the outside. In the presence of a relief pattern, several layers of paint should be applied from the wrong side to obtain a more saturated color. With this application, the canvas will be saturated, the background will acquire the desired shade. Thin vinyl wallpapers are not suitable for painting. If they are non-woven, it will be difficult to paint them.

Paper canvases are suitable for staining with any composition. In this case, the surface primer will be insufficient, it will be necessary to pre-treat it with water-repellent agents.

Tip: The paint base used for paper wallpaper should be water repellent.

Any paint released for sale is accompanied by instructions on which to navigate the dilution process for painting paper-based wallpaper. Non-woven fabrics are able to transfer up to 10 stains. Paper type material can be deformed even after the first repainting. Foamed vinyl wallpaper will not take the coloring composition due to the repulsive reaction of the material. As a result, it turns out that you can paint old paper-type wallpaper rolls, the main thing is to purchase a high-quality coloring composition, a terry roller, a primer and a water-repellent agent, and everything will certainly work out.

Post navigation