Clothes hangers are a must-have in every home, as otherwise outerwear quite problematic. In addition, floor hangers are also useful in the bedroom, so as not to put clothes in the closet every evening and not to use chairs or armchairs. But in the store beautiful furniture is quite expensive, so The best decision This is a DIY outdoor clothes rack. After all, from inexpensive materials, you can make original and beautiful hangers which will greatly decorate and make your interior comfortable.
You can make a clothes hanger from almost any material. But if you are going to do it yourself, the choice of material should be approached carefully.
Wood and plywood are best suited for work, these are the most practical and plastic materials that are easy to work with. If products from them are used in the house, then they are guaranteed not to be exposed to moisture and their service life will increase significantly.
Working with metal or plastic at home is quite difficult, so you should not choose these materials. It is worth considering the fact that sometimes there is a significant load on the hanger, so you need to use materials of appropriate strength so that the furniture does not break.
Examples of floor hangers using plumbing metal pipes
When you buy wood or plywood, pay attention to their quality, because this is a guarantee that the hanger will look beautiful. In most cases wooden crafts covered only with stain or varnish, so the texture remains visible on the surface.
Floor hanger in the form of a tree
Do floor hanger It is not difficult, and it does not require many tools and materials. This hanger is made from two sheets of plywood, approximately 70x170 cm in size and 18 mm thick. For manufacturing, you only need glue, a jigsaw and sandpaper. The work itself will also not take much time and you will not find such hangers in any furniture store.
First you need to draw on one of the sheets of plywood the outline of the future product. This can be done simply by transferring the drawing to scale on plywood. The most important thing is that the legs are of sufficient width - about 60 centimeters. This is necessary for stability, since if you make them narrow, then the hanger will fall if you hang heavy winter clothes on it.
In order not to draw a picture on the second sheet of plywood, you need to simply fasten two sheets of plywood with self-tapping screws or clamps before you start cutting. It is best to use the clips, rearranging them as you cut the plywood. Make sure that the sheets do not move and that both workpieces are the same.
To connect the blanks and turn them into a hanger, you need to make two slots. On one blank, you need to make a slot to the middle from the top, and on the second from the bottom. The width of the slot should match the thickness of the plywood.
Both slots on the inside must be well treated with glue, and then put the workpieces one on top of the other. As a result, you will get an original and beautiful floor clothes hanger, which will only have to be sanded and painted.
As you can see, making a floor hanger with your own hands is a simple task even for a beginner. And you can decorate it in any way. You can simply stain, varnish or paint the plywood. If you reduce the size, you get a children's clothes hanger that will decorate any room, especially if it is painted.
Wooden hangers made from natural elements
good design solution are racks made of natural natural materials. More specifically, from a tree trunk. Such a clothes hanger is very easy to manufacture and does not require special tools and materials.
First you need to find a good piece of dry wood, it must be completely dry and free of rot. The type of wood practically does not matter, but it is worth remembering that conifers with a high resin content is better not to use. Glue can be released from the barrel even after complete drying. Best to use hardwoods with a well-branched trunk so that there is more room for clothing.
First you need to completely clear the trunk of the bark, cut the lower branches to a height of one meter, and shorten the upper ones so that there are knots on which you can hang clothes. Then you need to completely sand the rack and clean it of dirt, bumps. If the wood is damaged by a bark beetle, then this does not interfere, as it creates a rather beautiful pattern that will fit perfectly into the design of the hanger.
The second stage of work is the stand, since the tree trunk cannot stand on its own. The most important thing to remember here is that the more massive the stand, the more stable the hanger will be. You can make a stand from a thick board, this will be the best option for work. The stand itself can be given any shape, it can be a circle, square, triangle and any other geometric or abstract figure.
You can attach the stand to the stand different ways. For example, if the lower part of the tree is quite thick, then you can simply screw the board to it with self-tapping screws. The heads of the screws will be at the bottom, so they will not be visible. If the bottom of the tree is relatively thin, then you can fix it in a stand by making a hole in it, it should be no larger than the diameter of the trunk itself. Then just the rack is fixed with glue on the stand - this method is the most reliable.
It is worth remembering one feature of the tree trunk - it has a cone shape. Therefore, it is better to make a hole in the stand smaller than its diameter, and carefully trim the bottom of the tree. Thus, the stand will hold well and there will be no gaps at the junction.
When the wooden hanger is ready, you just need to varnish it, as it is better to preserve the natural color of the tree. But if a light hanger doesn’t suit your design, then you can use stain or dark paint.
original and very practical option floor hanger, which is easy to make, make it in the form of a ladder. Such an accessory is perfect for the bedroom if you do not like to use an armchair or chair back to store clothes in the evening.
For manufacturing, you will need only two bars with a thickness of about 5x5, and a length of 170-180 cm. Also, for the crossbars, you will need three smaller bars, the length of which will be equal to the width of the hanger. All bars are ground or processed by a planer. To make the hanger look beautiful and neat, it is best to connect the parts together with spikes.
Then you just need to cover the hanger with stain and varnish. A convenient and comfortable clothes rack is ready. As you can see, this DIY clothes rack is very simple and it is suitable for a bedroom or a summer house.
Like any wooden piece of furniture, such a clothes stand will look great in almost any interior and you can arrange things on it so that they do not wrinkle. If desired, you can use several clothes hangers that can be hung on upper crossbar. If during the day the hanger interferes, then you can simply take it and put it upright, as it is light and does not attach to anything.
Other types of floor hangers
Despite the fact that the floor rack for clothes is a fairly simple element of the interior, there are so many ways to make it. It is enough just to show a little imagination and remember that the design must be stable. Otherwise, you can make clothes racks from any available material at hand.
You don't need any special tools to work either. Of course, there are hangers made on lathe made of wood, but they are made by professional carpenters.
Remember that any piece of interior made by you personally will not only be the next step in your skill. If you make something with your own hands, then this thing will be unique and unique.
In addition, by making the elements of the decor yourself, you not only show your individuality, but also save a lot. Since even the simplest clothes racks in the store will cost an order of magnitude more expensive than craft material. And this is another incentive to start making your own, since the products self made are even more expensive.
Floor hanger, one of the easiest tasks. Therefore, you should not buy it in the store, but rather make it yourself.
The wall hanger is the simplest, it can be made without special carpentry skills with your own hands.
Firstly, you need to find out exactly where the hanger will be located, it can be a hallway at home, a garage to hang something temporarily or a summer house.
For a beautiful and high-quality hanger, you should definitely purchase wood material, for example, now you can buy an already processed board. The length of the tree is needed up to about one meter, or according to your wishes.
On a machined board, sanded, machined special means For long term service, and varnished. Then hooks can be attached to the prepared board, in one, two or three rows.
Wall hanger in other rooms:
- On inside bathroom for clothes, bathrobe and towels;
- In a private room on the door for bags, sweaters or hats;
- For pantry or working area, for overalls or down jackets;
- Before entering a private house for umbrellas.
The wall hanger can be of any other shape, not only rectangular, it can be rounded, made with slats, in the form of a cloud or a tree. The choice of form depends on where exactly your imagination or preferences will take you.
As a part on which clothes will be hung, it can also be made original way it is not necessary to use standard hooks. It could be cutlery holders, spanners or any furniture fittings.
The material of which our "hook" consists can also be wood, metal or plastic. For a hook made of wood, an already known procedure will be required, sanding and varnishing. Such actions are performed, first of all, so that there are no splinters, and your thing does not deteriorate.
Another simple wall hanger option is to use parallel vertical or horizontal boards. This arrangement of boards will allow you to protect things from whitewashing, or protect the wall from wet things.
You determine the size of the boards yourself according to your preference, but do not choose thin boards, take them with a thickness of 15 millimeters or more. It will take more material and time to assemble such a design, but it will be a full-fledged hanger for things in your hallway.
floor hanger
Another type of hanger, distinguished by its elegance and many variations. appearance, the shape and material of which it can consist. This type of hangers is convenient, most often you can see it in a cafe, restaurant, hotel or other in public places.
A feature of the floor hanger is its mobility, you can constantly change the place and move the hanger, for example, in the summer you can take it out to the veranda or gazebo.
To build such a hanger with your own hands is not difficult. Options for floor hanger ideas:
- For stability, use the base for Christmas trees, for a pillar, they take a stalk from a shovel, onto which pre-prepared hooks are screwed;
- Also, a plastic pipe is used as a rack, and couplings are attached in the form of hooks;
- A dry branch that looks like horns, which can be installed on a base or on an additional pole;
- As an option, weld from metal pipes of different diameters, but after welding, carefully treat the surface and paint;
- An old tripod from a camera, ideal for the base of a hanger.
To conclude, we can safely say that it is quite possible to make a hanger with your own hands. But not just to make, but also to creatively and uniquely decorate, no one limits you in this. A variety of shapes for hangers allows you to choose a design for your interior and color palette.
According to the great director, the theater begins with a hanger. But is it just theater?
It is difficult to imagine any house - whether it is a cozy apartment or a spacious cottage - without this integral attribute of our life.
Hanger-rack on the floor, hooks on the wall in the hallway, coat hangers in the closet… They have one role: to keep our belongings in a tidy condition.
However, people with a rich imagination are able to turn this boring piece of furniture almost into a work of art. A simple set of tools for work, patience and a couple of non-standard ideas - and you are the owner of a unique thing.
Review content:
- Hanger as part of the interior
- Wooden wall hanger
- Do-it-yourself hanger in the hallway
- Do-it-yourself wardrobe hanger
- Floor hanger rack
- Unusual homemade hangers
- Hanger as home decoration
- DIY hanger photo
The main thing in any home is a spacious closet. Blouses and dresses, trousers and skirts, gloves and scarves, coats and raincoats coexist in it. 
A good hostess has every thing in its place. The clothes in the closet are different. And hangers for her, too, should be different.
How to make a hanger with your own hands? Believe me, it's easy and even fun. Dig into a chest full of long-forgotten grandma's dresses. You will find amazing things there.
Antique hangers (so-called trempels) can be restored, and they will turn into the main decoration of your wardrobe.
In the old days, clothes hangers were made of wood. Using one of the decor techniques, you can give an old thing new life. And what a life… You will want to hang such beauty on the wall, and not in the closet – and let everyone admire it.
You can transform a clothes hanger with the help of decoupage, unusual coloring or appliqué.
The soft shoulder pads are very comfortable to use. Things on them keep their shape and do not slip off. You need to wrap ordinary trempels with thin foam rubber, and then sheathe them with a pretty fabric. Beads and ribbons will give the new little thing a special charm.
But to decorate your house with a wooden hanger own production more difficult. Woodwork requires special skill. And special tools are needed here. 
Wooden wall hanger
Wall hanger - the design is simple. However, its manufacture should be approached with all seriousness - then it will serve you for a long time.
The main guarantee of success is strong, dry wood without cracks. A piece of timber or a board is perfect. The length of the workpiece depends on the length of the future hanger. Before starting work, it would be nice to treat the wood with an antiseptic.
Panel mounts are placed on the board in one, two or three rows as desired.
Such a hanger is the place behind the door in the bedroom, as well as in the bathroom, pantry or bath.
Accuracy is brought up from childhood. Furnish your child's room with a simple hanger. And if it is decorated with images of favorite cartoon characters, the child will be happy to look after his clothes. Note!
Do not mount the hanger directly on a plastered wall. Otherwise, you risk "whitewashing" your clothes. Yes, and a jacket or raincoat, soaked in the rain, will leave ugly spots on the surface of the wall. To avoid this, you need to attach a sheet of plywood under the hanger, thick paper or polyethylene.
Panels for hooks can be given any shape - waves, ovals, hearts, suns, etc.
Attention! The use of untreated wood is fraught with a large number of splinters. Don't forget to polish the hanger panel.
As fasteners, use empty spools of thread or ready-made hooks of any shape.
And if you turn on creativity, dried twigs or plant roots will be used. Cut them, remove the bark, sand, varnish - here you have the hooks. You won't find these in the store for sure. 
A simple wall hanger can be made from ordinary wooden planks. Nail them to the wall in parallel - this is the basis for fastenings, and the protection of clothes from whitewashing, and interior decoration.
Note!
Of course, you can’t make such a hanger in half an hour. But the end result of your labors will be a real hanger. It remains only to attach a shelf for storing hats at the top.
Do-it-yourself hanger in the hallway
A good hallway hanger should be durable, beautiful, and at the same time as roomy as possible. In the limited space of the hallway, outerwear, shoes and numerous accessories should fit.
This should not be forgotten when designing a hanger. There should be enough compartments and shelves at the hanger in the hallway to accommodate everything you need.
Attention! When marking out, consider the dimensions of the wall on which you will place the hanger.
For a standard apartment, a hanger of this size is quite suitable: the width is about 1 meter, the height is slightly more than head level. Fasteners for clothes are placed on the panel in 2-3 rows.
Note!
At the top of the hanger you need a shelf for hats. Structural strength will give straps. 
They are attached to the sides of the structure, connecting the shelf to the panel at an angle of 45 degrees. It is best to fix the hanger on the wall with dowels.
Do-it-yourself wardrobe hanger
Making a hanger with your own hands is very simple. There are many ways to make such hangers. You will need: coarse wire, a cut of a branch of a suitable shape, small plastic bottles, put on a wire base, bent under right angle metal bar or plate.
Wrap the base of the coat hanger with thin foam or similar material. Then choose a fabric that matches the color and sheathe the base. Add charm to the resulting cute little thing with ribbons, beads or lace.
If the hanger is designed for a baby, decorate it with a funny muzzle or appliqué. Pick up a hook - and hang in the closet.
Floor hanger rack
You can solve the problem of placing clothes in spacious rooms with the help of floor hangers-racks. Floor hangers are commonly used in the reception areas of various institutions.
These interior items are made of metal pipes. A floor hanger is a universal thing. You can place almost anything on it. Except, of course, shoes.
The disadvantage of a pipe hanger is its instability. If things are not evenly placed on it, it may fall.
But the floor hanger can always be rearranged to the right place or even hidden in the pantry. 
In residential areas, this type of hanger is rarely used: it takes up a lot of space and is dangerous for children. Nevertheless floor hanger rack it is quite possible to make it yourself. The material is usually used:
- for support - an artificial spruce cross, couplings plastic pipes, the swivel mechanism of a broken swivel chair;
- for a rack - trimming plastic or metal pipes, trunk small tree, a shovel handle, a tripod from a camera, a “leg” of a floor lamp and other suitable details.
Attention! The main thing in a floor hanger is its stability.
Unusual homemade hangers
The hanger can be made from absolutely any material or object. Sounds incredible? Don't believe?
See for yourself:
- Pieces of steel wire, tube or angle are great for the job. Welding can be used to connect parts. And if the metal is flexible and soft enough, just bend it with your hands. The choice of form is up to you.
- The design of plastic pipes will appeal to fans of high-tech style.
- If you love working with wood, this idea is for you. From the remains of wood of any thickness, you can make a practical and multifunctional hanger for the hallway.
- The simplest hanger can be twisted from wire. Attach clips to the edges of the resulting hanger - now you have a handy little thing for placing skirts and trousers. Experiment with the shape of the hanger - this can be the highlight of your product.
- The idea of a “hunting” life is the good old deer or elk antlers. Attached to a suitable base, can become a wall or floor hanger.
- It's no secret that many of us (especially men) prefer an ordinary chair to a spacious closet.
Often shirts, jackets and even trousers are hung on the back of a chair. Why not turn the back of the chair into an original hanger for those same shirts and jackets? On this design, the entire suit will easily fit.
Homemade hangers in the form of rings are quite suitable for storing belts, belts, ties.
Hanger as home decoration
Before you start making or decorating hangers, think about what style prevails in the interior of your room or hallway. After all new thing should fit perfectly into existing interior. Here are some examples: 
- Soft trempels, covered with linen or knitted fabric in bright colors, will perfectly fit into the decor of a country-style bedroom.
- Bright hangers with a "doll" design are suitable for a teenage girl's room in the style of Barbie.
- Luxurious, with twisted elements, the hanger will decorate the boudoir in oriental or palace style.
- A wooden hanger with carved patterns will emphasize the strict style of a study or hallway in a classic style.
- Antique, artificially aged or skillfully restored coat hangers will add a special charm to a retro-style room.
- In the bedroom of a glamorous lady, a hanger decorated with rhinestones, beads, bows and other shiny little things will look harmonious.
- structures made of metal or plastic parts, simple and unpretentious in form will decorate the room in techno or high-tech style.
- Simple in form, concise in design, hangers will complement the interior of a minimalist.
DIY hanger photo
IN cozy home it is impossible to do without a hanger - floor, wall or ordinary hangers in the closet. But besides its utilitarian function, storing clothes in a straightened form is also a way to show your creativity, an opportunity to do something with your own hands for household use. An original do-it-yourself outdoor clothes hanger or originally nailed hooks in the hallway - how can you do without them? You don't have to be a jack-of-all-trades to make simple jacket tremples or hat horns, all you need is a tool and some creative ideas.
Hanger as an art object or decorative element
To quickly clean up the house by organizing things in the closet, it is important to have enough space to easily fit:
- dresses and jackets;
- hats and caps;
- bags and belts;
- scarves and neckerchiefs;
- blouses and sweaters;
- business suits;
- outerwear for the off-season;
- skirts and trousers.
But for each such thing, a special device is needed:
- wall hanger;
- hangers (trempel);
- panel or shelf with hooks;
- clothes hanger in the hallway;
- rings and hooks for wardrobe for scarves and accessories.
It is easy to build many types of clothes hangers - with your own hands, photo:
If you look at old things from your grandmother's closet or chest, there are probably some pretty interesting clothes hangers. Vintage trempels and homemade hangers, if they don’t qualify for the “antiques” rank, may well be the basis for renovation or even become a unique art object. No matter how hard they try to transform old hanger masters of folk crafts, needlewomen and just lovers of something "creative"! For example, a clothes hanger photo.
Hangers from grandmother's use were made in an era when plastic or plastic products were not produced. An old wooden base can be used as an original decor object, especially if there is no wardrobe in the room. They can be transformed in any way or use any suitable technique:
- decoupage;
- original painting;
- application for varnishing;
- pasting with posters, magazines, geographical maps, etc.
It does not hurt to make soft “shoulders” for knitwear on the old basis so that it does not slip or stretch. These simple fixtures It is also easy to make "from scratch" from improvised materials. But if you need a wall-mounted base for hooks made of wood or an original floor-standing clothes hanger, then you need materials, tools and woodworking skills.
Wall wooden hanger
Although a wall hanger is the simplest device that is suitable for DIY, you should not make it rough and primitive. Even if it is planned to be used temporarily, for example, in the country, it is still better to make it beautiful so that the wall-mounted clothes hanger decorates the house for many years.
For a quality product, you need good wood, a board or a piece of a bar of the required length - the width of 2-3 freely hanging trempels with jackets. The board for the base must be strong and dry, without cracks, treated with antiseptics. On this basis, you will need to fill a few hooks:
- in line;
- in 2 rows;
- in 3 rows - in a checkerboard pattern.
The simplest single-row hanger is useful in any room:
- on the back of the door in the bedroom - under bathrobes;
- in the bathroom or bathroom - for linen during bathing;
- in the pantry - for working or seasonal outerwear;
- in the pool or sauna - under towels and bathrobes.
A simple wall hanger is also needed in a nursery or a teenager's room - accustoming schoolchildren to order, hang casual clothes on hangers so that they do not wrinkle.
Tip: The simplest hanger is a board with hooks and hanging loops for hanging on the wall. But do not forget that it cannot be nailed to a non-plastered wall or whitewash. From an unprepared surface, clothes will get dirty. Therefore, on the wall in an unfinished room under a hanger, they must be hung wooden shield, polyethylene film or Whatman. And wet outerwear will stain the wallpaper or painted wall on the prepared wall.
If you have any original idea regarding the design of the product, it is not necessary to make it in the form of an oblong rectangular disc. A wooden base for a wall-mounted clothes hanger with your own hands can be made in the form of:
- oval;
- wavy panel;
- musical staff;
- heart;
- spirals, etc.
After making the base, the wood must be sanded and varnished or processed in another way. It is important that the wood does not give the prerequisites for splinters when using a homemade hanger. It is desirable to make hooks or “carnations” of the hanger in any original way, suitable:
- old wooden spools for thread;
- handles of broken screwdrivers, scissors and other household items;
- specially cut hooks.
Hooks, “carnations” or “holders” for a hanger do not have to be made of wood or metal, they can also be bought at a hardware or building supermarket. Will also fit natural material- dry branches, knots, cuttings or cuttings of roots. They must be cleaned of bark, cut off or sawed off excess, polished and varnished.
Another standard hanger option is made from wooden planks nailed in parallel. They will become not only the basis for hooks, but also a decorative shield for clothes on a whitewashed wall or just a beautiful piece of furniture. It will take a little more time to make it, but such a design looks more solid than just a board for hooks. And if you attach a visor to the hats, it will already be a full-fledged clothes hanger in the hallway with your own hands.
Homemade clothes hanger in the hallway
Hallway hanger should be enough:
- strong and strong;
- aesthetic;
- capacious;
- multifunctional.
Ideally - for a small gap in the wall in narrow hallway should fit:
- outerwear of all family members or guests;
- hats;
- umbrellas and bags;
- shoes under clothes.
It is this versatility that is important to consider when building a homemade hanger for the hallway. Therefore, it is reasonable not just to make a board with hooks, but to decorate it beautifully:
- shield with hooks for clothes;
- visor for caps and hats;
- shoe rack;
- stand for bags and umbrellas.
Tip: The dimensions of such a hanger should not be arbitrary, they are measured with that part of the wall where the hanger should be located.
Usually there is enough space about 1m wide, the height of the clothes hanger in the hallway with your own hands should be more than head level. 2-3 rows of hooks are placed under the trempels and outerwear, plus a visor (shelf) for hats. Reliable connection of the side panel shelves can be connected with planks at an angle of 45°C. The hanger must be attached to the wall with brackets or dowels.
Floor hanger rack
Another type of fixture for placing clothes at the entrance to the building is a do-it-yourself outdoor clothes hanger. You can often see them:
- in the office of the clinic;
- at the reception;
- in the lobby or lobby;
- Internet cafes, etc.
They are commonly referred to as "standing" or "horn" hangers and are made from tubular metal. They are notable for the fact that it is convenient to hang on them not only outerwear, but also hats, bags and umbrellas. And although they are not as stable as hangers nailed to the wall, they are more compact and mobile. They can be rearranged to any place or put away in the pantry for the summer.
In houses and apartments, this type of hanger is used less frequently than in public places, but it is also easy to make it yourself. There are a few good ideas for example use:
- a cross for Christmas trees as a base and a long shovel handle as a stand, where ready-made long hooks are nailed;
- cuttings of plastic pipes and couplings for the base of the hanger;
- the base of a dried garden tree in the form of a multi-track structure, process and install on a cross or other base;
- cutting pipes of different sections as a telescopic rack;
- remnants of old chairs and stools and build a hanger on a rotating rotary mechanism(buy ready);
- as a basis - a tripod from an old camera, a floor lamp and other household items.
Attention: Whatever the design, it is important to observe the main condition - the stability of the floor hanger. And this depends not only on its design, but also on the support. It can be a rotating disk, 3-6 legs or a cross.
Do-it-yourself coat hanger or trempel
It is not difficult to make a clothes hanger on your own, while using any material at hand as a basis:
- thick wire;
- fragment of a thick branch in the form of shoulders;
- small plastic bottles strung on a metal base in the form of a large "paper clip";
- bent metal plate or corner.
The base for the hanger "shoulders" remains to be wrapped with synthetic winterizer (another filler) and sheathed with any beautiful fabric. This best option under knitwear. A beautiful satin bow or an attractive face from a small soft toy will help to add originality. Children will love these hangers. The main thing is to find the right metal for the hanger hook.
Do-it-yourself original hangers from improvised materials
Interesting ideas for the independent manufacture of hangers of any type can be implemented using a variety of improvised materials.
1. Metal. Scraps of steel wire, tube or angle are suitable for a metal coat hanger. Depending on the flexibility and thickness of the metal, the structure can be bent or joined by welding. The shape and design of the product is optional, see photo:
2. The remains of a bar, board, veneer and other wood are suitable for a wall hanger or a universal product in the hallway. Detailed video useful for those who love woodworking;
3. Parts old furniture it is also easy to transform into a hanger, for example, by building a multifunctional model based on a chair. This design is convenient in that a jacket and trousers from a suit, a shirt and a tie are conveniently located on one module.
4. The original base for hangers will become an original fixture in a room where there is temporarily no wardrobe. Any wooden handle that is suspended from the ceiling parallel to the floor at a level slightly above the height will do.
5. The old "hunting" idea is to use deer antlers instead of hanger hooks. They can be attached to any base - for a wall hanger or vertical rack with horns. Moose antlers will do.
6. The construction of plastic pipes will appeal to lovers of technical crafts.
7. Small wardrobe hangers are also needed, for example, in the form of connected rings made of cardboard or plastic. They are suitable for hanging scarves and neckerchiefs, belts and belts.
8. The simplest wire hanger "hand-rolled" with clothespins around the edges is an excellent tool for storing trousers or skirts. The shape of such simple hangers can be classic, in the form of a curved paper clip or in the form of an intricate labyrinth - as fantasy suggests.
Hangers as a stylistic decor
When choosing the material, shape and design of hangers, you should consider what style your interior is decorated in:
- a wooden hanger with chiseled decorations is suitable for an English office or a discreet classic hallway;
- soft hangers covered with bright fabric will decorate the bedroom in country style, shabby chic, romanticism or boho;
- metal-plastic structures will emphasize the originality of loft apartments, decorate the shelter of a lonely wanderer in the power of techno or high-tech;
- old restored coat hangers fit vintage, retro, Biedermeier or Victorian style;
- hangers of the simplest form and design - an ascetic attribute in the style of minimalism or functionalism;
- original hangers with a "girlish" design are suitable for a Barbie-style children's room;
- a chic and spectacularly decorated hanger - for a boudoir in a palace style;
- satin ribbons, sequins, beads and pebbles are attributes of a glamorous bedroom.
More about self-manufacturing hangers watch video:
You need to store clothes so that they do not lose their attractiveness, and finding the right outfit is always easy. But what will it be - a few nails driven into the wall, or a stylish and elegant floor hanger? A floor clothes hanger can become not only a functional item, but also a significant element of the interior, adding a touch of a certain style and charm to it.
Pros and cons of floor hangers
The main disadvantage floor structure is its dubious stability, especially for inexpensive products. But if you think in advance what kind of things the future hanger will be used for, you can choose a high-quality, fairly stable and safe model.
Advantages of floor hangers:
- Mobility. This part is easy to move to another place. If you have rearranged, repaired, added a new interior element to the room, or vice versa - freed up space from unnecessary things, now the hanger will look more harmonious in another place.
- No installation work. When installing a wall hanger, holes in the wall are often required, which damage decorative coating. When dismantling, the holes will be visible, and the wall fragment will have to be repaired. When you no longer need the floor clothes holder, simply hide it in utility room within minutes.
- Wide model range. You can choose a floor hanger for any style of interior, for any type of clothing, accessories and even shoes. They differ in size, material of manufacture, external design.
Hanger for clothes floor wooden
A wooden hanger is the most popular option. The tree is strong and durable, therefore, such a hanger will be stable and reliable. On sale there are lacquered and painted products, carved models, as well as the most concise ones, which, by the way, you can do yourself. wooden stand for clothes will be appropriate in many styles - from traditional classics to fashionable loft. Such a hanger will decorate a country-style room, as well as a room in a modern eco-style.
Clothes hanger outdoor metal
Such a hanger has an impressive weight, so there is no doubt about its stability. Most often, metal hangers are made of chrome-plated aluminum, which can be painted in a variety of colors. Separately, it is worth mentioning forged floor hangers. These are products that are not inferior in practical qualities to conventional metal ones, but have enhanced aesthetic properties. Wrought iron hanger is a unique and elegant decoration of your hallway or verandas.
Clothes hanger floor IKEA
Holders in a variety of materials can be found at IKEA. An IKEA hanger can also be a combination of materials. For example, plastic hangers are unstable due to their low weight, so manufacturers use a hybrid of plastic and metal. Also metal and wooden hangers they are equipped with rubber or plastic tips for hooks (so as not to spoil clothes) and legs (to protect the floor covering).
