Do-it-yourself ottoman. The best master classes with step by step photos. Do-it-yourself ottoman How to make a soft ottoman with your hands

The topic of this article is how to make an ottoman with your own hands from improvised materials. There are situations when you want to update the interior with some original item and make your own decorative pillows, a bean bag chair, ottoman. That's why The best way update the interior of your home - do something with your own hands. For example, pouffe.

It is not always financially possible to acquire fashionable, comfortable and modern ottoman. Homemade ottoman has a number of advantages over the store. At least in the fact that for him you can choose exactly the colors that you like, combined with colors interior and fit perfectly into your environment. Moreover, it is not always possible to find what you want in the store.
It is very easy to make a ottoman with your own hands. For this purpose, you will need self-tapping screws, a screwdriver or chisels, a hacksaw, a hammer. If you want to make a soft ottoman, then take a fabric, preferably bright and colorful, sharp scissors, needles, threads, holofiber, foam rubber or synthetic winterizer and, of course, sewing machine.

Armed with these items, you can get to work. First, sew an inner cover for the filler (foam rubber, holofiber or synthetic winterizer). To do this, you need a dense fabric, from which two circles are cut, the diameter of which should be approximately 50 cm, or two squares if you want to make a square ottoman with your own hands. These two geometric figures will serve as the top and bottom for the future pouf.

Then a strip is cut out of the same material as the base of the pouffe. Moreover, its length should coincide with a long circle or with the perimeter of a square. As for the width of the strip, it depends entirely on the height of your homemade ottoman. When you cut out the strip, remember to leave some fabric for the seam allowance.

Then we begin to sew a strip with wrong side: first to the bottom of the ottoman, then to its top. And you need to start sewing along the length of the strip. After all the seams are ready, turn the ottoman over to the front side, stuff with filler and sew. In principle, you can also sew in a zipper, which is much more convenient: for example, for cleaning a pouffe or replacing the filler.

All. The basis for your ottoman ready. Now you can start designing it. For those who know how to sew, this will not be difficult. After all, you can not just upholster a pouffe with a beautiful and colorful fabric, you can embroider an original pattern with your own hands, for example, create a kind of fantasy ornament, as well as a relief pattern. Anything can be used as a fabric for a cover: jeans, drape, silk and even cotton.

The cover is sewn, like the base, in three parts. First, the strips of the sidewalls are connected, and then the bottom is sewn. As for the upper part of the ottoman, it should be fastened with a zipper or buttons. At your discretion. Thus, the ottoman is ready to please the eye and serve as an excellent seat or footstool.

We make a simple, but very modern ottoman made of cardboard and plastic bottles with our own hands.

How to sew a modern and comfortable ottoman with your own hands. master class with photos of the stages of work.

Interesting options for puffs self made from different materials that you can make yourself.

It is very practical to have a round ottoman in home interior. You can make such an ottoman with your own hands, but you will need a special tool. The manufacturer is not responsible for the quality of work.

For the production of an ottoman, materials will be required:

Chipboard or plywood sizes 16, 18 mm;
Wooden pine beam 20 × 40 mm, but there may be other sizes;
Self-tapping screws 45 mm long, they fit best in size;
Fiberboard 3.2 mm, 2.5 is possible;
Foam rubber 40 mm, 1 mm: density 25;
Sintepon 10 mm, possibly thinner;
Leatherette (eco-leather), or fabric, genuine leather;
Interlining;
Odorless glue;
Threads;
Staples or nails.

After the procurement of materials, we proceed to the production of an ottoman

First, cut out the bottom of the pouffe. For this, two halves of a chipboard are taken, two circles are connected and cut out. The seat is ready.
For the manufacture of legs, we cut a pine beam 45 cm long, 7 pieces.
On two circles, we evenly mark places for attaching 7 beams. We drill 2 holes on one beam. With self-tapping screws, 45 mm long, we connect the legs with circles.
A small frame came out.
We cut the fibreboard into 2 parts according to the height of the ottoman.
The plate is fastened with 16 mm brackets along the bars, as well as along the bottom and top around in a circle.
The frame is ready. We begin to upholster the ottoman.
First, we smear the top of the pouffe with ALIMP glue. ECO glue "and glue the foam rubber 4 cm thick. Then we lubricate the sides and glue the foam rubber 1 cm thick.
Further, the entire soft surface is sealed with synthetic winterizer.
From the leatherette we cut out the upper part of the pouffe according to the dimensions of the chipboard, as well as the sides and sew it on a sewing machine.
We pull the finished upholstery onto the pouffe. The bottom is fixed with a staple gun.
Flizelin close the bottom of the pouf.
We fasten the plastic legs with a screwdriver and wood screws 3 cm in size.

Cut the chipboard to the desired diameter. A beam of the desired height, depending on the required height of the pouffe.

We upholster fiberboard around the perimeter.

To align the folds on the upholstery material, we use a synthetic winterizer.

Apply with a spray gun or just by hand.

Foam rubber thickness from above - 4 cm

We put on a cover and hammer it with a stapler or nails.

Screw on the plastic legs.

The round pouffe is ready.

An ottoman is certainly a necessary thing in the house. But there is no particular need to buy it, since it is really easy to make it yourself. For this procedure, it will be possible to use various home materials and some tools. To learn how to make a round ottoman with your own hands, it is worth considering some practical advice from experienced professionals, studying which you can come to the conclusion that anyone can do it.

The network has a huge number of options for how you can make a pouffe with your own hands. Thanks to independent actions, you can save a significant amount of money and use improvised materials. The most popular ways are as follows:

seat made of plastic bottles;
ottoman from a bucket;
from a cable reel.

Pouffe from plastic bottles

The option of plastic bottles is quite popular, since almost every house has them, and there will be no problems with the source material. In addition, the bottles are quite strong and durable. To make such an ottoman in the hallway, you will also need adhesive tape, foam rubber, thick cardboard or plywood and upholstery fabric.

It is important that the bottles are the same both in size and shape, and in density. Their number depends on how voluminous the pouf you want to make. But remember that the seat will be stronger, the larger the area of \u200b\u200bthe top.

Place the bottles upside down and tie them tightly with duct tape. According to the resulting diameter, cut out four identical circles from cardboard or plywood. Two will go to the lid, and two will go to the bottom. So the design will be stronger. They also need to be attached with tape. This is the preparation.

Bottles are connected to cartons with tape

Now you need to make it soft. To do this, cut a piece of foam right size and wrap the side of the ottoman. Cut out a circle for the top. Foam rubber can be replaced with synthetic winterizer. The thicker the layer, the better. Glue the material to the workpiece.

The surface of the resulting frame is covered with synthetic winterizer or foam rubber

The seat trim can be made of fabric, leatherette, decorated with ruffles and appliqué. A knitted cover will make the ottoman unique. Using your imagination, you can create what you like best.

Another option is 2 large 10-liter plastic bottles. At one (lower) you need to cut off the neck and insert another into it. Stitch exactly the same soft material and put on a cover.

Ottoman from plastic bottle We cut one bottle and combine it with the second. For the base and seat, cut out circles from chipboard
Foam rubber for our ottoman We fasten the foam rubber on the seat We fasten the foam rubber on side surface
For the bottom, a leatherette circle is suitable. We make a cover from the material you like and pull it over the ottoman

From a bucket

Bucket ottoman

You can also make a pouffe with your own hands from inventory that is no longer used for its intended purpose. It can be, for example, an old leaking bucket. The principle is the same. Turn the bucket upside down, cover it on the sides with batting or synthetic winterizer.

Glue the foam to the sides

Put a suitable round model up. Soft material can be glued on for a more secure hold.

Glue the foam to the lid

Remove the handles from the buckets in advance, otherwise they will interfere.

We sew a cover

Sew a cover from a pleasant to the touch material and put it on the seat.

We put on a cover

A similar design is obtained by using a cable reel. In a word, if you want to make a round original ottoman with your own hands, you can take any blank and cover it with soft material. A piece of furniture made in this way will not only free your house from trash, but also save money.

From chipboard and plywood

Cylindrical ottoman

And below is a step-by-step guide on how to make an ottoman from scratch using only the right materials and your skill. Such a product will look beautiful and noble in a city apartment. So, you will need:

Chipboard about 18 mm thick;
plywood (3 mm);
wooden blocks for legs;
self-tapping screws;
synthetic winterizer;
upholstery fabric;
staples, glue and thread.

First you need to cut out two identical circles. They will serve as the base and top of the pouf.

We cut chipboard circles of the required sizes and lumber parts

Then between them put the bars of the desired height and attach with self-tapping screws at the same distance.

We connect circles and beams with self-tapping screws into a frame

When the frame is ready, cut a sheet of plywood to sheathe the side of the product with it.

Fasten to the frame around the perimeter chipboard sheet making a wall

Using a stapler, nail the strip at the top and bottom to the chipboard.

Fully anchored wall

Now you can glue the workpiece with soft material. Upper layer must be thick in order to sit comfortably on the pouffe. 5 centimeters will be enough.

Fastening of foam rubber and synthetic winterizer

Sew a cover from any upholstery material. It can be eco-leather, dense fabric.

Finished case

You can attach it to the frame with staples or glue.

We put on a cover and fix it from below with a stapler or nails

If desired, make legs for the ottoman.

We fasten the legs

As you can see, to engage in the manufacture of such a simple home furniture completely easy.

Ready product

To do this, you only need a little ingenuity, improvised materials and tools, and a suitable idea. Considering how much finished furniture costs in stores, you will understand how profitable it is to be able to do something with your own hands. In addition, you can be truly proud of your poufs, because you have invested in them not only work, but also your soul.

When there is a desire to bring something new to the interior or update the style, additional furniture attributes will help you. For example, any person can make an ottoman with their own hands - how experienced master needlework, and a beginner in this field.

Puffs are popular for a reason, because they can be used as a chair, table or as a footrest.

Puffs are popular for a reason, because they can be used as a chair, table or as a footrest. In addition, they take up little space, which is a huge plus for homes with limited space.

You are not limited in the choice of form, parameters and raw materials.

Handmade ottomans have many advantages: you are not limited in the choice of shape, parameters and raw materials. To create an ottoman, you can use any available materials and it will not require large expenses, or it will cost you free of charge.

Handmade ottomans have many advantages

Everyone can make an ottoman with their own hands, regardless of skill level. Some of the available models will be from plastic bottles or tires. With a little more effort, you can make a pouffe from planks. And if you have skills in the field carpentry, then you can easily make a wooden pouffe with drawers. Having experience in cutting and sewing, you can create a unique product of any shape and model.

According to the instructions, you will receive a high-quality, original piece of furniture that will serve you for a long time.

An original and quite simple to manufacture will be a pouffe bag that will delight children. To create it, you will need to sew a lined bag and stuff it with Styrofoam - it is sold in many building supermarkets.

Having experience in cutting and sewing, you can create a unique product of any shape and model.

In any case, the main thing is to patiently, slowly follow each step, according to the instructions, then you will get a high-quality, original piece of furniture that will serve you for a long time.

Everyone can make an ottoman with their own hands, regardless of skill level.

Several master classes on creating pouffes from improvised raw materials

Pouffe from plastic bottles.

Everyone can make it, for this, take:

plastic bottles, with a volume of 1.5-2 liters;
thick cardboard (packaging from under the equipment is suitable);
foam rubber;
upholstery fabric;
scissors;
thread, needle;
scotch;
glue.

When the ottoman is ready, the hole can be sewn up tightly or a zipper can be sewn in its place.

Note: The cap on each bottle must be tightly screwed on. Secure the container with each other with adhesive tape, place it on the first circle so that it completely occupies its space. Place the second circle on top, make sure that the elements are securely, evenly fixed.

In any case, the main thing is to patiently, slowly follow each step.

Next, start finishing the product - cut out two round and one rectangular parts from foam rubber, be sure to leave a margin for seam allowances. Connect them together with strong stitches. Instead of foam rubber, you can use synthetic winterizer, insulation, or dense fabric folded in several layers.

Anyone can make an ottoman with their own hands - both an experienced craftsman and a beginner in this field.

Some of the available models will be made from plastic bottles or tires.

Do-it-yourself ottoman from an old bucket.

To create it you will need the following materials and tools:

jute rope;
construction glue gun;
cardboard;
upholstery fabric;
microfiber;
stapler;
large button.

Remove the handle from the bucket, put it upside down and wind the rope tightly in a circle. In order for it to hold well, each stitch must be planted on glue.

Instead of foam rubber, you can use a synthetic winterizer, insulation or a dense fabric folded in several layers.

When the entire bucket is wrapped with rope, proceed to the manufacture of the pouffe seat. From thick cardboard, make a circle corresponding to the diameter of the bucket. From the fabric, also prepare a circle, but 10 centimeters larger. Connect the fabric and cardboard with a button in the center. Shape the microfiber into a tube, wind it around the button between the fabric and cardboard, fixing it glue gun. Fill the cardboard base with tubes to the brim. The top fabric should be stapled to the back of the cardboard. Now glue the part to the base and the work on the ottoman is completed.

First you need to cut out two equal round parts (or squares if you want to get a square ottoman) of a suitable size - this will be the top and bottom of the ottoman.

Tire pouffe - great idea for cottage or living room.

Prepare the following materials and tools:

old tire;
twine (at least 20 meters long);
self-tapping screws;
glue gun;
a sheet of plywood 3-5 millimeters thick;
jigsaw;
electric drill.

First you need to measure the inner diameter of the tire until it thickens, divide this value in half and add one and a half centimeters to the result - you get the radius of the desired circle.

You can also add a strap, thanks to which it will be possible to easily move the product.

Draw it on a sheet of plywood, cut it out with a jigsaw. You should make two circles - on the seat and the bottom of the ottoman. Then drill holes in the tire and plywood, fasten the parts together with self-tapping screws.

Now you can glue the rope to the tire. To give the product an unusual pattern, start from the center of the seat, laying the twine with a snail.

The top fabric should be stapled to the back of the cardboard.

Use a clear, fast drying, high strength adhesive.

When the top of the pouf is completely pasted over, proceed to the sides of the tire. To make it easier to attach the twine, turn the product upside down. After the first circle, let the glue dry well to avoid the rope moving.

Make a case for an ottoman according to the above diagram.

Note: do not rush, apply a lot of glue, process the future pouf circle by circle. It is better if you work together - one will check that the rope lies without gaps, and the other will continue to stick. Working on such a pouffe on your own, you can easily allow the formation of gaps, it is possible to displace the twine from the surface of the tire.

When the glue dries well, cover the finished pouffe with clear varnish.

You can decorate the product with legs or wheels.

Attach buttons, rhinestones or a border to the seams as a decoration.

How to make an ottoman quickly without patterns.

Prepare for work:

textile;
stuffing material;
scissors;
needle, thread;
measuring tape.

From the fabric, prepare two identical round elements, the parameters of which are equal to the top and bottom of the product. Set aside a few extra centimeters for the seams.

First you need to measure the inner diameter of the tire to its thickening.

Then cut out two equal rectangles - their width is the height of the ottoman, their length is half the circumference of the upper and lower zones.

Seams can be decorated with ribbons, border.

On the resulting rectangular elements, sew the seams from one edge so that they form a long ribbon.

Then you need to sweep the first circle to it, stitch along the seam. Then do the same with the next circle. Seams can be decorated with ribbons, border.

You should not rush, apply a lot of glue, process the future pouf circle by circle.

So, without wasting time on patterns, you can make a cover for a pouffe. The filler can be a variety of materials. Place the stuffing opening at the bottom of the product so that the stuffing opening is not conspicuous. When the ottoman is ready, the hole can be sewn up tightly or a zipper can be sewn in its place.

Following this description, you can build an ottoman cube.

Following this description, you can build an ottoman cube. The only difference is that all parts should be made square, and there are four of them in the side parts. In order for the product to keep its shape better, use dense fabrics, and choose synthetic winterizer or foam rubber as a filler.

In order for the product to keep its shape better, use dense fabrics, and choose synthetic winterizer or foam rubber as a filler.

There is a whole mass of affordable, unusual ideas on how to make an ottoman with your own hands, do not be afraid to fantasize and experiment.

VIDEO: How to make a round ottoman with your own hands

To update the interior of the room, it is not necessary to start a renovation. An additional piece of furniture made by yourself will help to change and revitalize the interior. One of the practical and stylish things in the room can be a do-it-yourself ottoman. Homemade pouffes have a lot of advantages over store-bought poufs, as you can choose the shape, size and material for making them yourself. In addition, when creating a masterpiece, you can use any materials at hand, so a do-it-yourself pouffe will cost almost free. Today we invite you to get acquainted with non-standard ideas that will help you create a unique and striking piece of furniture for any room.

How to make an ottoman with your own hands from improvised materials?

Ottomans came to our life from the East many centuries ago and almost immediately gained popularity, since this piece of furniture could serve as an armchair, a table, and a footstool at the same time. Today, craftsmen offer a lot interesting options making cute options from improvised materials. Making an ottoman with your own hands is not a difficult job, but very exciting, besides, a thing created by your own hands radiates special warmth and has an aura of home comfort.

Plastic bottles as a basis for a pouffe

If you do not have the desire to cut out, cut out the base for the pouffe, then you can use plastic bottles for this purpose, which are available in any home in unlimited quantities.

Important! The color of the bottles in the finished product does not matter - you can use any bottles of beer or water with a volume of 1.5-2 liters.

To make a high-quality and stable ottoman, you will need:

16 bottles of 1.5 liters or 9 bottles of 2 liters. Use bottles with caps

Important! From round bottles you can create a large circle, square or rectangle. Choose the shape of the product according to your desire and preference.

Packaging cardboard. Any cardboard from household appliances, which has not been thrown away for years, can be used to make a pouffe.
Scotch.
Foam rubber.
Upholstery. The fabric must be durable and of high quality so that it can be wiped, cleaned and washed. You can use leather or furniture fabric, which is sold in a specialized store.
Hot glue gun.
Zipper for cover.
Scissors.

Important! If you are planning to create a large ottoman that will serve as a table or chair, then for the convenience of manufacturing the bottles, connect them into separate sectors and sections, fixing them with adhesive tape, and then begin to form the overall design.

Step-by-step instruction:

Take bottles with tightly closed lids and connect them to each other with adhesive tape. If the future product will have a round shape, then start connecting the bottles from the middle: take one bottle and, moving along the radius, attach new elements to it with tape.
After completing the circle, cut out two circles of the same diameter from cardboard, which should be slightly larger than the bottle design. This will be the top and bottom of the base.
Tape the cardboard tightly to the plastic structure with tape. The frame for the pouffe is ready.
Cut out 3 blanks from foam rubber: 2 circles of the same diameter and 1 rectangle, which will wrap vertically around the frame.
Fasten the workpieces with construction stapler or thread.
Sew a cover for an ottoman with your own hands from furniture fabric.

Important! It is better to make a cover with a zipper, so that later it can be easily removed and washed. You can sew several options for covers and update appearance products from time to time.

Cardboard boxes can also be used for the frame. The main thing is that they should not be damaged. Instead of foam rubber, you can use a synthetic winterizer, insulation or several layers of dense fabric.
If you plan to use the ottoman for personal needs, then use a thick fabric to make the cover, and process the seams with a border. For a children's ottoman, use a brighter, more colorful fabric, as well as a denser layer of foam rubber. TO finished product add an additional functional element in the form of a strap that will make it easier to carry. The child will be happy to carry such a pouf with him as a toy.

Pouffe from a plastic bucket

An interesting solution to create a furniture masterpiece is to use an unnecessary plastic bucket for the frame of the pouffe. To make a useful and beautiful thing you will need:

Plastic bucket.
Thick jute rope.
stapler.
Hot glue gun.
Scissors.
Cardboard or thin plywood.
Upholstery fabric.
Microfiber (several new cloths).
Velcro tape.
A large button or handle from a furniture cabinet.

Step-by-step instruction:

Wash the bucket, remove the metal handle from it.
Flip the bucket, wrap it tight outer surface rope.

Important! Plant each stitch on the glue so that the rope sits tightly.

Cut the end of the rope, carefully hide.
Put the bottom of the blank on the cardboard, circle it.
Cut out the circle according to the outlined pattern.
Lay out the template on the upholstery fabric, cut out the blank with an allowance of 5-10 cm.
Connect the fabric and cardboard. Make a hole in the center, thread a bolt from the furniture handle through the cardboard and fabric. Screw the knob onto the bolt. If you use a large button, then connect the fabric with the cardboard in the middle with it.
Roll the microfiber into a tube, wrap the bolt radially between the cardboard and the fabric, creating a kind of roll. Fix the microfiber securely with glue so that it does not unwind.
Stretch the upholstery fabric, secure it on the back with a stapler.
close reverse side seat with another piece of fabric, put it on the glue to hide the traces of cardboard.
Cut the Velcro into 4 equal pieces, stick them on the bottom of the bucket and the base crosswise.

Important! The fluffy part of the Velcro should be facing the seat, and the bristles should be facing the bucket.

Connect the cover and base.

Do-it-yourself ottoman is ready and now you can sit on it comfortably!

Pouffe from a stool

A stool well-knitted from durable wood can please the owners for many years to come, if you make a stylish ottoman out of it. To convert an old stool into a modern piece of furniture, you will need:

Plywood.
Foam for the seat.
Glue.
Upholstery fabric.
stapler.
Self-tapping screws.

Pre-strengthen the structure of the old stool with self-tapping screws and proceed as follows:

Shorten the legs of the stool a little. Check the work with a level so that the product does not subsequently stagger.
Attach 4 sheets of plywood to the stool legs with self-tapping screws.
Screw the fifth sheet of plywood on the bottom. This will be the bottom of the future crafts.
Cut out the foam for the seat with an allowance of 5 cm.
Coat the top of the pouffe with glue so that the foam does not stray into a lump.
Attach the upholstery fabric along with the foam using a stapler.
Decorate the rest of the structure with a fabric, fix it with staples.
Screw the wheels (optional) or legs.

Important! The foam rubber on the sides can be attached with slats to give the design a round shape and make the ottoman more beautiful.

Wooden ottoman with storage box

For those who like to work with wood and have the skills of a carpenter, we offer to make a fairly simple, but very functional and beautiful pouffe with a drawer. In such a pouf you can put children's toys, magazines or shoes.

To make a practical product you will need:

Laminated board or chipboard sheet. The material is needed to make a circle with a diameter of 30 cm and rectangles with a size of 40x30 cm.
Wooden bars in the amount of 4 pieces and 4x8x8 cm in size.
Glue for wood.
Furniture wheels with special fasteners (4 pieces).
Metal corners (4 pieces).
Self-tapping screws.
Screwdriver, screwdriver.
Foam rubber and upholstery fabric for the cover.

Step-by-step instruction:

Connect the pre-cut chipboard boards in such a way that you get a box 40x40 wide and 30 cm high. Use metal corners and self-tapping screws to fix the material. The corners of the structure must be straight. Spread additional glue on the joints.
Glue the bars to the bottom of the structure, on which the wheels will be attached in the future.
Install the cover with glue and screws. Choose any base you like.
The frame is ready, start sewing the cover. Cut out foam rubber and furniture fabric according to the shape of the lid. Sew a strip of fabric 10 cm along the contour. You can sew on canvas, frills, drapery as desired and to your taste.
Lay a layer of foam rubber on the lid and pull the cover over the top.

How to sew a pouf?

If you like to sew, then you can make a soft ottoman with your own hands at home, not only from multi-colored fabric, but also from old clothes. Any sweater can turn into a very noticeable and comfortable piece of furniture. The main thing is desire and imagination.

Option number 1. Simple fabric pouffe

If you don’t have time to fiddle with patterns, then use a simple way to make an original piece of furniture:

Cut out 2 circles from the fabric with the corresponding diameters of the bottom and top of the product and allowances for the seams.
Cut out 2 rectangular pieces of the same size. The width of the rectangles should be equal to the height of the pouffe, and the length should be half the circumference of the upper and lower parts of the product.
Sew the rectangular parts along the width on one side to make a long ribbon.
Sweep the resulting tape and circles. Stitch circles along the seam. If the seam is not even enough, close it with a decorative border.
Fill the finished case with any suitable material.

Important! For internal filling pouf, use foam rubber or synthetic winterizer. These materials hold their shape perfectly and do not deform.

Sew the zipper into the open edges of the rectangular ribbon.

Important! Make a hole for the stuffing material at the bottom so that it is not noticeable. Optionally, you can sew it tightly or sew a zipper into the hole to be able to change the material if necessary.

You can make a pouffe in the shape of a cube. Details for the product must be square in shape. On the sides you will need 4 parts, and on the base and bottom - 2. Stitch the parts to each other, and to clearly mark the edges of the cube, use a canvas in a contrasting color.

Important! For the manufacture of the cube, use a denser fabric to give the product strength and elasticity.

Option number 2. Multicolour fabric pouffe

Sewing a bright piece of furniture is not difficult at all. For work you will need:

Fabric in different colors.
Lining fabric.
Large buttons (2 pieces).
Filler.
Needle with threads.
Sewing machine.

The process of making a bright masterpiece is quite simple:

Draw a circle on paper of the desired size (such as the pouf you want to get). Divide it into 12 parts. If you have fewer flowers, you can divide the circle into 6-10 parts.
Attach the finished patterns to the fabric, cut out triangular blanks with a small margin for seams.
Cut out the lining fabric in the same way.
Grab the petals of the circle with threads, and then sew them on a typewriter. You should get two round bases - upper and lower. Sew the bases from the inside out, leaving one piece unsewn.
Unscrew the cover, place the filler inside it.
Carefully sew the last piece. Close the sewing place with large buttons.

Important! In order not to spend money on buying new fabric, use shreds from old clothes.

If you like to crochet or knit, you can make a soft frameless ottoman with your own hands:

For work, you will need the most thick knitting needles with a diameter of 9 mm and fairly thick wool. You can also use cotton ropes (20-30 pieces).
Tie them into a long rectangle.
Fasten the side of the workpiece with a rope to make a spacious skirt, and pull the bottom with the same rope to make a bag.

Important! To fill the bag, you can use old things or purchase foam rubber (holofiber).

Option number 3. Furniture from an old sweater

To make an original piece of furniture, you will need:

Old sweater.
Scissors.
Needle and thread.
Felt.
Lining fabric for the cover.
Stuffing material.

Step-by-step instruction:

Cut out the bottom of the felt for a round or square ottoman. This element will serve as the primary blank.
Take a sweater, turn the sleeves inside out.
Sew the remaining hole with an even seam.
Stitch a piece of felt to the bottom of the sweater to make a pouch.
Prepare a cover for stuffing from the lining fabric. If the primary felt blank is round, then you will need a piece of fabric in the form of a rectangle, for example, with a length of 70 cm and a width of 50 cm. If you decide to make a square ottoman, then calculate the required dimensions for four parts.
Sew all the details together and leave a hem at the top for the lace, which will tighten the hole after filling the cover with material.
Place the cover inside the sweater.
Fill the case with material. Pull the string as tight as possible.
Straighten your sweater, enjoy your new piece of furniture.

Option number 4. Ottoman-ball

If you do not know how to make a round ottoman with your own hands to decorate a children's room, then this option is for you. To do children's ottoman with your own hands, prepare the following materials:

Fabric with a high density of two colors.
Paper for making patterns.
Scissors.
Needle and thread.
Sewing machine.
Polyethylene.
Silicone filler in the form of balls.

The process of creating an ottoman ball is as follows:

Make a pattern on paper, observing the required dimensions. You can use any round piece of furniture to create a pattern, for example, a lampshade table lamp or a big ball. Measure its circumference, and divide the result in half. Divide the number into 5 parts so that the 3 middle and 2 extreme are the same size. As a result, you will get the diameter of the base in the form of a circle and the width of the stripes that make up the spherical cover of the pouffe.
Transfer the resulting markup to the item of your choice, starting with the part in the form of a circle. Draw the next line below, along the pre-calculated bandwidth.
Cut the plastic bag along one side and cut off the bottom. Lay out the bag on the marks of the first strip, and secure the edges with tape. Transfer a quarter of the strip to the bag and cut it out. Similarly, prepare the part of the middle strip.
Transfer all the details to graph paper, cut out the details of the ottoman from the fabric of two colors, leaving 1 cm for the seams.
Sew the strips, leaving one side unsewn.
Attach one strip to the round piece. The ends of the strip should converge. Stitch them and connect the base with a strip of seams, stepping back 1 cm from the edge.
Sew a similar blank for the opposite side of the cover. Stitch the workpiece to the middle strip. Do not sew up the ends of the middle strip.
Stitch the second semicircular blank with middle lane. Iron the seams.
Fill the case with silicone balls, and to make the shape elastic, add small pieces of foam rubber.
Sew up the hole with a hidden seam.

What can you make an ottoman with your own hands?

Above, we told you how to make ottomans with your own hands, a master class for each product option will help you realize your plan. However, it is impossible to fit all the materials for the manufacture of an original piece of furniture into the framework of one article, since there are a huge number of items around that are suitable for creating a masterpiece, such as these.

Tires

A wonderful do-it-yourself ottoman from tires can be put at home, on the veranda personal plot or right in the country, replacing expensive rattan furniture with almost free.

To make practical furniture, it is enough to cut two circles from plywood and attach them to the top and bottom of the tire. Then - fix the bases with self-tapping screws and decorate the entire workpiece with twine. To make the ottoman a little higher, you can screw two legs.

Important! Using 2 car tires and a sheet of bending plywood, you can make a chair with a back.

Plywood and vinyl

Sheets of plywood with dimensions of 45x45 and cuts of 45 degrees are used to make the frame. Vinyl is cut to the size of the plywood with a margin of 2-3 cm. Place on top of the vinyl soft tissue and not thick foam rubber, close the whole structure plywood sheet. Bend the vinyl upholstery and secure with a stapler. To fix the frame, use metal corners and self-tapping screws.

Important! Decorate vinyl trim can be decorative carnations. Lay the tracing paper pattern onto the vinyl and create an interesting pattern with studs. The paper is easily removed, as a result - it turns out beautiful ottoman from plywood with an original pattern.

Artificial fur

The fluffy material can be used to make a seat or to create an entire product.

plastic pipes

Making a pouffe plumbing pipes as follows:

First you need to cut the pipes into pieces 30 cm long (about 9 pieces), then paint the pipes acrylic paint in several layers and treated with a protective varnish.
After drying, the pipes must be fastened with an adhesive gun.
Polyurethane bathroom mats can be used for the seat. Fold them in half and make cuts along the perforations (the length of the cuts is 5 cm). Fold the rug to make a bud and insert the rolls into the pipes. The buds should enter tightly, then no additional fastening is required.

Important! When making a pouffe, pay attention to the floor in the room:

Since the laminate is very sensitive to any mechanical stress, it is better to make a pouffe without wheels and legs for such a coating.

We hope that after reading our article, you have chosen for yourself suitable option making an original, functional piece of furniture and decorating the interior of the house with it. Now, in a soft homemade ottoman or chair, you can relax, watch TV, read, or you can place an ottoman in the hallway and it is convenient to take off your shoes on it. And most importantly - in the manufacture of your masterpiece, you used unnecessary things and materials, while spending a minimum of money!