Make your own toy box. Original storage of toys: types, ideas, practical advice. Step by step instructions for making

During games, children often scatter toys not only in their room, but throughout the apartment. Because of this, cleaning the house turns into a daily marathon, in which both mother and kids participate. Practice shows that you can clean up faster if you use special boxes for storing toys. Making them with your own hands is quite simple, and you can use it for a very long time.

Necessary tools and materials

Making a toy box is easy. Material costs for its manufacture are minimal or non-existent. The dimensions of the product are chosen taking into account the height of the shelves, the width and depth of the niches in the nursery. The base of the box can be made from lining, plywood, wooden slats, cardboard, vines.

Consider an example of making a small box of slats. Tools that will be needed for work:

drill driver;
wood screws;
metal tape measure;
ruler with a square;
hand saw-hacksaw;
pencil;
scissors;
brush for varnish (paint, glue);
a set of sanding sponges or paper.

All necessary materials can be bought at hardware store. The list includes:

wooden lath or lining board;
wooden block for the manufacture of stiffeners;
paint, furniture varnish (or paper and PVA glue, depending on the chosen product design).

Step by step instructions for making

The box can be made in 1-1.5 hours. The work includes the following steps:

The prepared site is covered with a film or other protective material so as not to damage the floor.
On millimeter paper, a product design with dimensions is drawn. It is also desirable to draw an axonometric projection.
Boards and timber are cut and cut with a hacksaw to the desired length.
The corners of the parts are ground with an emery sponge or paper.
The bottom is made of timber and slats: two stiffeners are placed and the planks are screwed with self-tapping screws, leaving no gaps between the elements. The bottom can also be made from plywood, a piece of fiberboard or chipboard.
From boards and bars are collected side walls(on self-tapping screws) and connect them in series.
The finished container is varnished, painted oil paint, apply drawings according to a template or painting. The toy box is ready.

Grinding boards and bars is best done before assembling the box, because. ready product hard to polish. And the burrs left in hard-to-reach places container, may injure children's skin.

decor ideas

A homemade toy container is often made in the form of a chest. In this case, children can not only put toys in it, but use it as a stool. The side walls and the lid of such a box can be covered with a fabric with a pattern. And so that the lid is not lost, it is attached to fabric hinges. For ease of use, a loop is sewn to the lid.

If the box is made large, and foam rubber is placed under the upholstery of the lid, it will look like a sofa. In the photo - a beautiful chest made of an aged board with a lid upholstered with patterned chintz.

It is not necessary to constantly run from the found toy to the box. Cleaning will be faster if the container is equipped with wheels. Its movement will also be facilitated by flexible handles made of a thick rope, which is fixed by passing through slots or drilled holes.

Instead of a wooden toy storage box, you can also use a large cardboard box. For decoration, it is pasted over with bright paper or wallpaper with a beautiful pattern. Decoupage from gift foil on a polymer film also looks beautiful.

Small cardboard boxes of the same size can be covered with fabric and placed on a shelf. For convenience, strong handles are sewn to the side walls.

If parents know the art of weaving from vines and paper tubes, it will not be difficult for them to make original basket boxes. Such containers are very convenient: dust does not accumulate in them, and small debris falling through the weave can simply be removed with a vacuum cleaner.

For a box with toys, you can knit an original cover or sew pockets for small things on its surface.

A box for storing children's toys can be made with your own hands and decorated with scrap materials. To do this, you only need your imagination.

As a rule, we buy a lot of different toys for our children (dolls, cars, soft, educational, and so on). As a result, they are all scattered in different corners of the apartment. To prevent this from happening, we suggest that you find out how and from what you can make a box for At the same time, it will be possible to accustom a child to order.

Using an unused cardboard box

Big shoe boxes household appliances and so on can be reused. Just decorate them - and you will succeed comfortable spot for storing children's dolls and cars.

A master class on how to make a toy box with your own hands is described below.

You will need a cardboard box big piece fabrics.
Coat the bottom of the box around the perimeter with glue from a gun.
Unfold the fabric and line the bottom of the box with the middle, gently spreading the flap and pressing it to the glue.
Coat all the walls from the inside, stretch the fabric and glue it to the sides.
Wrap the fabric over the outside of the box and glue it to the bottom of the walls.
Turn the box over and wrap the fabric at the bottom. The patch should be evenly pressed against the wall. Glue the fabric, and cut off the excess.
To strengthen the bottom, coat the fabric with glue around the perimeter of the box and glue cardboard on top.
Flip the box.
Pin clothespins on top, and put something heavy inside so that the fabric sticks well to the box.

The box is ready!

Box with handles

Instructions on how to make a box for children's toys with handles will help you in this matter.

Take two types of fabric, thick tape or rope, glue, glue gun.
Cut off a strip of fabric. In width, it should be greater than the height of the box (it is necessary that the flap can close the bottom and wrap itself a little inside the box). The length of the fabric should completely wrap around the perimeter of the box.
Glue the cut out rectangle of fabric to the sides of the box.
Wrap the excess fabric on one side inside the box, and on the other, glue it to the bottom.
Measure out a piece of fabric in a different color. It should cover the bottom and walls inside the box.
Lubricate the bottom inside with glue and glue the fabric.
Coat the walls inside and also glue the fabric. Make folds around the edges.
Glue the folds at the intersection of the two types of fabric.
Measure the tape and glue it to the bottom, around the perimeter of the box, using a hot glue gun.
Measure out two identical pieces of tape. Handles will be made from them.
Glue two tapes to the walls on the sides of the box.
On top of the box, glue another tape around the perimeter. It should cover the bottom of the handles.

The toy box is ready!

Pasted box

The easiest way for this purpose is to take self-adhesive wallpaper. Then you do not have to mess with glue and wait until all the walls dry.

But, regardless of whether you will paste over the future toy box with self-adhesive or paper wallpaper, the principle of operation is the same:

Cut off a piece of wallpaper so that it can wrap around the perimeter of the box.
If necessary, coat the walls with PVA glue.
Glue wallpaper around the perimeter of the box.
Make cuts at the top and bottom of the protruding parts of the wallpaper.
Wrap the protruding pieces inward and to the bottom.

The box is ready!

Using a tree

Do-it-yourself wooden toy box is quite difficult. But such an item turns out to be very reliable and will last much longer than a cardboard box.

Also, it can not only be used in the interior as decorative element. Such a box can become a functional part of the room.

For example, if you put a box under the wall, put a blanket and cushions on top, you will see extra bed for sitting.

How to make a box?

For convenience, here is a guide on how to make wooden box for storing toys with your own hands.

Create a sketch of the future box (picture 1). Consider its dimensions, what will be the height, depth and width. Will he be on legs or stand upside down on the floor? Will there be handles and where should they be located?
Prepare all the necessary materials and tools (picture 2). To get started, you will need plywood or MDF board. They are sold at a hardware store. But if you have old furniture(for example, a table, a chest of drawers, a wardrobe), then you can disassemble it and get the necessary materials. You will also need screws and corners, hinges, PVA glue or carpentry. Of the tools you need a simple saw or a circular saw.
If you buy materials in a store, you can ask them to cut the boards for you there. the right dimensions. If this is not possible or you are using improvised material, then do everything yourself (picture 3). To do this, draw the board into pieces and saw it. As a result, you should get the following number of parts: four walls (all the same or two different), a bottom and a lid.
Start assembling the box. For this place of the joints of the walls, coat with glue (picture 4).
Then connect the two parts with corners (picture 5).
Attach the lid to the box with hinges (picture 6).
Wipe off excess glue with a cloth and leave the box to dry.
Decorate the box. For example, sand it and paint it (picture 7).
Attach the handle and legs as desired (picture 8).

Storage box is ready!

A box of boards

A wooden toy box can be made from planks. There are two ways to collect.

Take plywood for the bottom and nail four blocks in the corners. Then nail planks to them with thin carnations. You can make gaps between the tree, so ventilation will be better.
Nail plywood to the bottom of the box on both sides. And nail planks to it. Thus, the sides of the box will be solid, and the sides will be with slots.

In apartments where there are small children, perfect order is a rare guest. Toddlers put toys wherever they want. But there are a few tricks that will help teach the child to order, and make the interior more attractive.

Shelving

Young children love to have their toys in sight. That is why it would be wise to place a rack with open shelves in the living room or children's room. It is desirable that the furniture is low, as some kids are interested in climbing not only on chairs. The rack will perfectly accommodate books, puzzles and other toys, and it will be convenient for the child to run up at any time and take his favorite bear from the open shelf. Instead of a rack on the wall, you can place modules or wooden boxes that will perform the same functions.

Baskets and boxes

Store children's toys conveniently in soft textile bags, wicker baskets, cardboard boxes and plastic containers. You can even make such storage systems with your own hands, using unnecessary boxes left after purchases or old things that have long been superfluous in the closet.

Wooden boxes

Wooden crates can also turn into toy organizers, as long as they are processed in such a way that there are no burrs on them. To make them look more attractive, it is desirable to paint them. acrylic paint bright color. You can fix the wheels on the box and make a lid. So, an ordinary wooden box will become a mobile bench with a storage compartment.

Textile pockets

In any hardware store, you can find an organizer with many pockets for storing small items that hangs on a wall or door. It is easy to make it at home, using the same old things, fabric scraps. In such an organizer it is convenient to put dolls and soft toy friends of the baby.

Bathroom storage

All kids love to take water procedures. Sometimes it turns into a whole ritual. Therefore, in the bathroom, you also need to find a place for all kinds of ducklings, boats, fish and other toys. Plastic buckets, metal and plastic nets are perfect for storing them. It is important to wash and dry toys after each bath to prevent bacteria from accumulating on them.

There are several more important aspects that need to be taken into account . Knowing about them, parents will always be calm for their child and for the interior in which they live.
All parents know how difficult it is to achieve perfect order at home when the children are still very young. Especially in the nursery, where toys are scattered all over the floor, and on the table, and on the beds, and under the bed, and in other unexpected places. But this problem can be easily solved, armed with a creative spirit and the necessary materials at hand, which can be found in any home.
Our task now is to make or sew with our own hands an interesting, roomy and safe container for storing children's toys. Its types can be different: box, organizer, bag, box, etc.
In any case, whether it is a container for storing large toys or a bag for children's little things, the resulting thing should be a fun and original element of the interior.

DIY toy box

To make a custom toy box with your own hands, you will need:

Chipboard panels (side walls and bottom);
self-tapping screws;
Screwdriver;
Measuring tool (tape measure or long ruler);
Small supports (legs) or furniture wheels;
Materials for external design (fabrics, decorative film, paints);

This box is perfect for storing large toys. But in order to make it, you need at least a small skill of a carpenter.

Therefore, it is better to entrust this matter to a man who will connect all the details of the box to each other and attach special supports or wheels to it (so that the box can be easily moved around the room).
And the external design of the container for storing toys can already be done by mom, pasting it decorative film or drawing some funny drawing on it. Inside the box for softness can be sheathed with furniture stapler, using for this dense natural fabrics and filler (foam rubber, synthetic winterizer).
We can offer both simpler and spectacular option drawer:

DIY box for storing toys

Necessary materials

Big strong box;
Beautiful self-adhesive film;
Package with a picture from a children's gift;
Scotch;
Scissors or stationery knife;
Glue.

This box is similar in appearance and purpose to a toy storage box, but unlike it, it is simpler in execution.

Another advantage of such a box is that the child himself can turn it over and take everything he needs.

First, carefully cut off the lid of the box, glue the cuts with tape.
Paste the box with a film with an outer and inside, including the bottom.
Take a gift bag and cut out interesting colorful details (animals, flowers, etc.).

Glue them with tape or glue to the sides of the box. You can also come up with other options for decorating such a container. For example, if you have a girl, make fabric flowers, bows, etc.

DIY fabric toy basket

You will need:

Fabrics in 2 different colors;
Sewing machine;
Strong threads;
Scissors;
Interlining.

You can sew a basket for toys with your own hands from any fabric you like. It is very easy to cut it out, guided by the fact that in ready-made the basket has a square shape with rounded corners.

In order for the basket to keep its shape, the fabric parts are additionally glued with dense interlining.

For interior and exterior design, it is desirable to use fabrics of different colors. Basket handles are also additionally cut out and attached with a strong seam.

Toy storage bag

In order to sew such a bag with your own hands, you will need:

Dense polyethylene;
Textile;
Scissors;
Sewing machine;
Threads.

Structurally, the bag consists of a bottom, the main part and a lace. Cut out 2 round pieces from the fabric to serve as the bottom. Determine the size at your discretion - you can sew both a bag for storing large toys and a bag for small items.
Using the diameter of the bottom, measure the width of the bag and, having determined the height, open the main part of it. When doing this, do not forget to take into account that the bag consists of a woven material and a transparent film.
In the upper part of the bag, which consists of fabric, you need to make a line for the lace. The lace can be sewn from the same fabric.

Toy organizer

Necessary materials:

Thick fabric;
Scissors;
Sewing machine;
Strong threads.

This DIY wall organizer is quite easy to make. It is sewn according to the accordion principle. A rectangular piece of fabric is folded like an accordion (or ladder) and stitched from the sides and in the middle in certain places (depending on the number, width and height of the pockets).

Such an unusual organizer is usually hung on the wall and small toys and various items for creativity are put into pockets.

All parents know how difficult it is to achieve perfect order in the house when the children are still very young. Especially in the nursery, where toys are scattered all over the floor, and on the table, and on the beds, and under the bed, and in other unexpected places. But this problem can be easily solved, armed with a creative spirit and the necessary materials at hand, which can be found in any home.

Our task now is to make or sew with our own hands an interesting, roomy and safe container for storing children's toys. Its types can be different: box, organizer, bag, box, etc.

In any case, whether it is a container for storing large toys or a bag for children's little things, the resulting thing should be a fun and original element of the interior.

DIY toy box

To make a custom toy box with your own hands, you will need:

Chipboard panels (side walls and bottom);
self-tapping screws;
Screwdriver;
Measuring tool (tape measure or long ruler);
Small supports (legs) or furniture wheels;
Materials for external design (fabrics, decorative film, paints);
Scissors.

This box is perfect for storing large toys. But in order to make it, you need at least a small skill of a carpenter.

And mom can already take care of the outer design of the toy storage container by pasting it with a decorative film or drawing some kind of fun drawing on it. Inside, the box for softness can be sheathed with a furniture stapler, using dense natural fabrics and filler (foam rubber, synthetic winterizer) for this.

We can offer a simpler and more effective version of the box:

DIY box for storing toys

Necessary materials

Big strong box;
Beautiful self-adhesive film;
Package with a picture from a children's gift;
Scotch;
Scissors or stationery knife;
Glue.

This box is similar in appearance and purpose to a toy storage box, but unlike it, it is simpler in execution.

Another advantage of such a box is that the child himself can turn it over and take everything he needs.

First, carefully cut off the lid of the box, glue the cuts with tape.
Paste the box with foil from the outside and inside, including the bottom.
Take a gift bag and cut out interesting colorful details (animals, flowers, etc.).

Glue them with tape or glue to the sides of the box. You can also come up with other options for decorating such a container. For example, if you have a girl, make fabric flowers, bows, etc.

DIY fabric toy basket

You will need:

Fabrics in 2 different colors;
Sewing machine;
Strong threads;
Scissors;
Interlining.

You can sew a basket for toys with your own hands from any fabric you like. It is very easy to cut it out, guided by the fact that the finished basket has a square shape with smoothed corners.

In order for the basket to keep its shape, the fabric parts are additionally glued with dense interlining.

For interior and exterior design, it is desirable to use fabrics of different colors. Basket handles are also additionally cut out and attached with a strong seam.

Toy storage bag

In order to sew such a bag with your own hands, you will need:

Dense polyethylene;
Textile;
Scissors;
Sewing machine;
Threads.

Using the diameter of the bottom, measure the width of the bag and, having determined the height, open the main part of it. When doing this, do not forget to take into account that the bag consists of a woven material and a transparent film.

In the upper part of the bag, which consists of fabric, you need to make a line for the lace. The lace can be sewn from the same fabric.