Wall hanger in the hallway for clothes. Ideas how to do it yourself. Do-it-yourself floor hanger: plywood, wood, pipes How to make a hanger for outerwear

Ideas for making clothes hangers with your own hands: photos and drawings of hangers for the hallway. A variety of options for making homemade clothes hangers.

You can make a clothes hanger with your own hands practically from improvised materials that are lying around at home idle. Craftsmen do not cease to amaze with their ingenuity, here is a clear example of this, a home-made clothes hanger from ordinary forks.

A similar version of a hanger made of metal spoons.

Pallet clothes hanger.

Here is a clothes hanger from a pallet, and again the old pallet was used. A wooden pallet is sawn into two parts from each half of the pallet, you can make a hanger, just paint the workpiece and attach hooks to the boards with screws.

Another option for a pallet hanger, here a whole wooden pallet, it is sanded with sandpaper, the boards are painted in different colors and hooks are attached.

Wooden clothes hanger.

Such a hanger is more suitable for a summer house or a bathhouse; wooden knots fixed in a wooden structure are used as hooks here.

Hanger made of metal profile and bars.

The design consists of several bars and metal profiles fastened together.

wooden hanger with your own hands.

Used here wide board with an imitation of a piece of old wood, coat hooks are made of bars and secured with screws screwed in with reverse side boards.

Wood is fired blowtorch, which achieves the original texture of the product, The final stage coat hanger with clear lacquer.

In this version, there was no carving work.

And in this design, instead of hooks for clothes, door handles which can also be painted.

An interesting option for hangers from boards.

Original homemade hanger in the form of a tree.

For manufacturing, thick plywood is used, the contour of the tree pattern is drawn and sawn out electric jigsaw. The design is painted and attached to the wall with dowels.

Hangers for children's clothes.

The details of the hanger are sawn out of plywood with a jigsaw and painted bright colors, so you can make a hanger in the form of animal figures.

floor hanger for clothes with their own hands.

The simplest version of a floor clothes hanger made of pipes, for manufacturing you will need a thin aluminum pipe 2–2.5 m long. The pipe must be bent, as shown in the figure, and the clothes hanger is ready.

Wall hanger made of pipes.

And this hanger consists of a picture on the wall, clothes hooks are attached with dowels directly to the wall.

Today I want to tell you about how you can make homemade hangers for your home wardrobe at home. I have been using this technique for a long time. I hope that someone this option will be interesting.

I usually make hangers in batches of 15-20 pieces. In this case, they can be made step by step, which greatly simplifies the whole process.

Materials and tools

For manufacturing you will need:

A piece of plywood or fiberboard for making a template;
Cutting boards 15-20 mm thick without cracks;
Wire 4 mm thick;
Nut M4;
A cap from a felt-tip pen or a soft plastic tube.
Tools and hands.

DIY manufacturing

First of fiberboard sheet I made a template by sawing it with a jigsaw. I took the size of the template from a standard plastic hanger.

Then he transferred this template to the boards with a pencil in such a way as to avoid getting into cracks, and the existing knots were inside. They can then be cut out.

I drilled two holes from the inside with a Forstner drill with a diameter of 22 mm.

I sawed out my future hanger with a jigsaw along the contour and cleaned it with a grinder.

I marked the future hole for the hook and drilled it with a 5 mm drill. To drill the hole evenly, I used a vise when drilling.

From the inside drilled hole I made a groove with a rasp into which the nut holding the hook will be placed. This is necessary so that the hook does not cling to clothing.

He clamped it in a vice and sawed off a 20 cm long wire with a hacksaw, rounded one end with a file, and chamfered the other. I removed the rust from the wire with sandpaper.

From the side chamfered I cut an M4 thread with a die, about 5 mm long.

To bend the hook, I made a special mandrel from a birch blank. I drilled a hole in it with a diameter of 6 mm, clamped the mandrel in a vice, and then inserted the end of the wire into the hole and bent the hook.

So that the hook in the hanger does not fall through, I made a limiter from a cap from an old dried felt-tip pen. I sawed off the upper part of the cap and inserted the cap into the hook.

Then I inserted the hook into the hanger and secured it with an M4 nut.

That's the whole structure.

Making video

And you can see more about the process of making this hanger in my video:

A hanger in the hallway is a must. This is especially noticeable when the hallway is small in size and there is no way to install a closet in it. Now there are a lot of options for different hangers that you can choose from, but wooden ones are the most popular. wall models hangers in the hallway.

Hanger Selection Criteria

If you decide to purchase a clothes hanger in the hallway, and not do it yourself, you should find out about the criteria according to which you choose given subject furniture:

First of all, a wall hanger should be as functional and practical as possible. To do this, all its components must be coated with special solutions that are designed to protect it from moisture and other influences.

Assortment of wall hangers

If we talk about the varieties of hangers that are mounted on the wall, then you can get confused in the proposed models. In the traditional version, this piece of furniture is a bar on which hooks are fixed. It can be positioned vertically or horizontally. The first option allows you to visually raise the ceilings in the hallway, so it is more in demand among buyers. And horizontal models are compact, and it will not be difficult to place them even in a small corridor.

Vertical hangers

This type of structure is made of laminated chipboard or wood with a length of 40 cm to 2 meters, depending on the model. The shape of this object can be any, for example, rounded, rectangular or curved.

It is made from a single piece of wood, or from several lamellas, which can be equal to each other, or can be asymmetric elements. You can choose the option with a built-in mirror, and its location can be right or left. For classic interiors designs are often used, upholstered in leatherette and having a quilted pattern.

In terms of functionality, it is very important to have a shelf at the top of the hanger so that you can put hats. When choosing, be sure to pay attention to the number of hooks. They should be enough to accommodate all the necessary clothes. If you liked the model, but there are few hooks on it, then it is possible to install additional ones.

Advice! Before buying, you must carefully measure the free space that is intended for the hanger, so as not to buy a model that is not the right size.

Horizontal and designer hangers

Such designs can visually increase the width of the wall. In addition, they are more compact and can be installed on a small wall. basis horizontal hanger is a board with wooden or metal elements. IN modern models A combination of wood and plastic is used.

The imagination of designers knows no bounds, so now such designs of hangers are being created that were never even imagined before. Very interesting idea with folding hooks. Such hangers are made of wood, and can be made of metal. Their highlight is that the panel consists of many elements that, if desired, can be bent and turned into a functional hook.

For modern interiors minimalist hangers that do not contain any unnecessary elements in their design are the best fit. decorative elements and are able to complement the simple design of the room.

You don't have to buy expensive design solution for the hallway, you can create a unique hanger with your own hands, the analogue of which is no longer found.

Making a wooden hanger with your own hands

If there are few materials and time, then you can create a wooden hanger according to your own ideas about this element of hallway decor. We will consider several options for making hangers with our own hands.

simple model

To perform the simplest design wall hanger we will need:

Material. It can be a processed board and hooks. As hooks, you can use something else, for example, knobs-buttons.
Hacksaw
Perforator
Fixing tool
Measuring instruments such as tape measure, angle and level.
Pencil.

The simplest design is the bar with hooks. To do this, you need to take a board right size. The length depends on how much free space is available on the wall, and the width can be as desired by the master.

Important! The board should be free from defects and as dry as possible.

The surface of the board can be varnished or stained to make it more decorative. After drying, it can be screwed to the bar required amount hooks.

After the hanger is ready, several holes are drilled in the wall, their number depends on how long the board itself is. From the extreme hole on one side and the other, there must be indents of 5 cm. The holes are supplied with dowels, and the finished design of the hanger is attached to the wall.

Regarding hooks, we can say that everything that is at hand will do. For example, unnecessary ones will look original spanners, which are first cleaned and polished. After that, they need to be bent and several holes drilled into the part, into which self-tapping screws are inserted for screwing to the bar. Instead of keys, ordinary forks also look interesting, but they must be steel, since aluminum ones are very fragile.

If possible, instead of hooks, you can use tree knots that are screwed to the bar. It is not necessary to do this in the same plane - you can arrange the hooks in a chaotic manner. This arrangement will give originality to the hanger.

More complex designs

In order for things not to get dirty on the wall and not get dirty themselves, the design of the wall hanger is being improved with their own hands. To do this, two strips are already taken, which are parallel in width to each other so that one is at the top point, and the second is at the bottom.

Between them, several planks are fixed with the help of self-tapping screws, which are twice as long, so that it is possible to qualitatively tighten the elements together. The width of the vertical parts may correspond to the width of the horizontal ones, or may be slightly less.

Additionally, it is possible to make a shelf for hats. To do this, a board with a width of 25 cm is mounted on top. general design it is attached with metal corners.

Making another variety more complex design hangers:

7 pieces of bars with a cross section of 5 * 5 cm are taken. They should be about 30 cm in length.
Boards are processed grinder, corners are smoothed on them.
The processed elements are covered with several layers of varnish.
The bars are arranged in the shape of the letter "P" and are fixed on the wall in pre-prepared holes.
In every plank pen drill made with 2 holes. Cylindrical dowels are installed in them, painted to match the color of the hanger.

Important! The dowels are attached with PVA glue.

An interesting model of a wooden hanger is a design in the form of a tree. It is made from a large sheet of plywood, MDF or chipboard, on which the necessary outlines are applied with a marker and the part is cut out with a jigsaw. In this case, the ends must be processed and painted over or covered with an edge. The product is attached to the wall with self-tapping screws. The branches of such a hanger become like hooks.

It is not always possible and willing to install hooks on a hanger. In this case, you can mount a metal or wooden bar. It is important to remember that if the bar is too long, then it is imperative to install a jumper in the center.

You can also not spoil the wall with a mount, but create a minimalistic chrome-plated ceiling-type hanger. To do this, 2 flanges are fixed on the ceiling, into which pipe sections 90 cm long are inserted. Using the corners, we mount a horizontal tube between the previously installed sections. Thus, it turns out perfect option hangers for trampolines.

Conclusion

A hanger in the hallway is a mandatory attribute and a functional element. What it will be depends only on the seasoned style and preferences of the owner. You can buy a ready-made design, or you can do it yourself. In any case, this piece of furniture will appeal to all family members.

As you know, not only the theater begins with a hanger, but also visits to other less pretentious institutions. Of course, every hostess wants her house to be remembered by the guests not just for plentiful treats, but for unique furniture.

Not just a decorative element

Making a piece of furniture both beautiful and multifunctional is not easy. But with regard to the clothes hanger, these two points are fundamental, because the limited number square meters in the hallway obliges to save not only free, but also "working" space.

For small rooms should be considered only floor options hangers. Why?

Firstly, the things that should be in the hallway belong to the demi-season period or to the cold season. Jackets, fur coats, down jackets weigh a lot, which is why ordinary coat hangers rarely support their weight. And when not only coats of parents, but also jackets of children, raincoats of guests, umbrellas of grandmothers are hung on one coat hanger, even the most persistent “fighters” cannot withstand this load. The “correct” floor hanger allows you to place all the necessary things, and can also easily withstand their weight!

Secondly, winter and demi-season coats often differ dramatically in weight. It is impossible, as you know, to release fighters of different weight categories into the ring. The same case: if a September cloak hangs on one scale, and a fox coat is piled on the other, the mechanism will crack. From the beautiful fur of the fur coat, you will have to wash the stains from the smudges of dirt, and the unstable hanger will need to be taken in for repair.

Thirdly, things need space and air - without it they wither. The absence of the necessary distance between several warm things generates bad smell, infections. That is why it is important to leave some space between the fur of a fur coat and, for example, a sheepskin coat. Floor with a strong bar allow you to correctly place almost all warm clothes by category without the risk of mold, unpleasant plaque or suffocating smell.

Here she is, my one and only...

Unfortunately, often ready-made options floor hangers are designed for large apartments or private houses, and the inhabitants of modest "odnushki" or "kopeck piece" are allowed to be content only with fragile wall mechanisms: compact, but absolutely impractical.

In this case, you can develop a design yourself or entrust such a task to a professional designer. He will take into account your wishes, the number of free meters in the hallway, the color scheme and the number of warm clothes.

What options to choose from?

corner

The high ceilings of the hallway (in this part of the apartment the ceiling can reach a height of 3-3.5 meters) allow you to make a closet that reaches the very ceiling. This allows, in addition to the hanger itself, to fill the space inside the cabinet with various useful insides:

shelves open / closed;
retractable drawers / just drawers;
boxes/hooks.

Your hanger transforms from an ordinary bar into a multifunctional closet where you can hide everything from shoes and umbrellas to a butterfly net or fishing rods.

Mirror corner

One of the types of corner appearance which brings it as close as possible to the closet (including the issue of multifunctionality). A large number of it makes sense to mount mirrors in a closet only if the lighting in your hallway is set correctly. If desired, it can be supplemented with wall lamps or mini-floor lamps, but it must be borne in mind that such a light source is still not enough if you want, for example, to apply makeup or try on a new skirt.

If you still decide to install a mirror, then you need to choose the most convenient option for you: external or internal. The external mirror will have to be washed more often, but there will be no problems with the light (if other lamps are present). The interior will be in constant twilight, but the surface will always remain clean. The choice is yours.

Hanger-hooks

The design of the hanger-hook, known to us from the old Soviet times, has now been significantly improved. We are all used to the fact that hooks are usually located on the crossbar, which is attached directly to the wall. This makes the structure entirely dependent on the strength of the wall and the strength of the material from which it is made. Typically, hangers of this design are left for the bathroom or pantry: these rooms do not require much physical effort from the furniture.

Meanwhile, correct design floor hanger, which has a small amount of hook, allows you to increase functionality, will solve some of the problems associated with the low growth of the inhabitants of the apartment. Floor-standing usually imply the presence of an upper shelf, on which they put:

hats;
scarves;
gloves;
umbrellas and other necessary trifles.

This is not always the right decision for families with children or for adults whose height is less than 170 cm: if, for example, a person who cannot reach the cherished line comes to visit you, this can put you in an awkward position.

The decision to put things on the lower shelves also causes some difficulties, since many apartments have pets: your beret may not be good.

Hanger-panel - for a classic style

In this case, the only right solution will be either a closed wardrobe, or special hooks for small things. Of course, the whole hanger cannot consist of such hooks. But they will be a great addition to those elements that are already in your design.

In fact, the closet

The sliding wardrobe is now one of the most common, most expensive and, unfortunately, the most impractical options. What is the snag here?

The standard wardrobe takes up too much space. This is a great option for a bedroom or hall, but there is too much free space in the hallway. Most wardrobes are designed according to the same principle: two doors + several shelves + several pencil cases + several hooks. Any additions are considered redundant as this model has gone through fire and water.

The assembly of wardrobes makes them very fragile for such a conflict zone as the hallway. Agree on this small plot space, anything can happen: soccer ball will break the outer glass of the cabinet, the cat will jump into the lower pencil case, and the door will slam, the neighbor, who has come in for salt, will accidentally touch the door with his shoulder, and it will jump out of the rut. Movable structures are always not The best decision for rooms in which there is active movement.

Open hanger bench

This is one of the most conservative and most acceptable solutions for small apartments. The hanger shop, as a rule, consists of the following modules:

several upper canisters (options with open shelves or mezzanine models are possible);
several lower cases for shoes (open shelves or retractable boxes-shelves are also possible);
a base with attached various models of hooks and a crossbar (sometimes a mirror is added);
shop.

These are rarely made of metal or plastic. The design of this somewhat old-fashioned, but very practical unit is carried out exclusively by people who know a lot about organizing space. Products, as a rule, are made of wood, hooks, base and crossbars in this case must be metal or also wooden.

In addition to strength, it is good for apartments where elderly or disabled people live. The stool next to the closet takes up an unacceptably large amount of space. The hanger bench is more compact. The option that, between us, you can think of ...

Crossbar hanger

“Minimalism is our everything” - this phrase has become almost the motto of postmodern interior design. A small apartment with small rooms and small furniture needs a small hanger.

On the hanger-beam can fit everything that a couple needs, which is assigned a cozy "odnushka":

several warm coats;
several down jackets;
demi-season raincoats;
sport jacket;
vest;
handkerchief;
several hats.

On the stand below will fit several (6-8) pairs of shoes (for one season). True, shoes will have to be removed from time to time (alternating summer and winter seasons), but the same problem appears in the case of a closet.

Remember the simple truth: the more space there is for things, the more things try to fill that space.

Advice

When buying a crossbar, pay attention to the material from which the crossbar is made, the holders and the fasteners themselves. The rod must support the weight of coats and jackets, and also all the hangers-trempel that you will cling to this crossbar.

At the bottom there can be an additional shelf for shoes, made of a material that will not be too easily soiled (pay attention to the color).

Chose a type but still confused about the material it will be made from? Both the appearance and its strength depend on the material.

What to choose from?

Plastic, wood, metal: which is more practical?

Plastic

Hangers made of plastic are the most impractical of all that the furniture market offers us. Weak strength, inability to attach heavy and strong fasteners, brittleness. Things made of plastic are now less and less common in rooms where a child can be.

Plastic furniture offers an abyss of design solutions:

color mixing;
the ability to melt and create original forms;
matte and gloss.

This is especially true for wardrobe manufacturers: the more beautiful the furniture, the faster the owner will be found. Meanwhile, after a few months, the same owner is forced to get a warranty card out of the box, since a plastic cabinet or shelf will show its real face after a few weeks of operation: a screw will fly off, a glossy surface will be scratched, or even worse: the door will fall off ...

Sad prospect, isn't it?

Metal

Good strength, but not too high a degree of practicality - it's all about metal cabinets. Metal structures can withstand a giant's outerwear, a dozen of the heaviest sheepskin coats, and many pairs of boots ... However, an obsessive shine and too sharp a reaction to temperature changes may not be very pleasant as flooring and wall cladding.

Often, due to a too sharp temperature drop (condensate has formed on the hanger), excess moisture begins to decompose the wall space near the hanger: wallpaper peels off, plaster “flows”, unpleasant tracks appear on the paint. Sometimes parquet or linoleum can be deformed. Moreover, the deformation is caused not so much by condensate as by the large weight of the hanger: metal constructions weigh up to several tens of kilograms.

The external strength is very attractive for a floor hanger. But is this feature worth it? cosmetic repairs hallway?

Tree

Last, but not least, material.

1 First, quality. Wood furniture (made from real wood, not recycled sawdust) is known for its durability.

2 Secondly, good interaction with the external environment. The tree does not give in to internal deformation, and yet does not spoil the floor, walls, ceiling. "Sweating", "condensate" are words that are not known to wooden furniture. When you buy a hanger made from durable wood, be aware that it won't ruin the color of your walls, warp your parquet, or stain your ceiling.

3 Third, wood is a “healthy” material. trend to improve environment most fully manifests itself in the furniture industry: interior items began to be made from environmentally friendly materials. This is not the cheapest option. But, on the other hand, what could be safer for your health and the health of your child than wooden furniture. Natural material promises the absence of an unpleasant smell - an important criterion for hangers closed type. Winter things that should be stored in this makeshift pantry through the long spring, autumn and summer months (even if they are packed in covers) absorb the unpleasant odors that the furniture produces. For organic wood, this problem does not exist: you can forget about naphthalene. Clothing will retain its presentation and "commodity smell".

4 Fourthly, wooden hangers look very advantageous, for example, with key holders or wooden umbrella baskets. It is very difficult to find suitable color scheme and the design of small things for furniture made of plastic or, moreover, metal. They have to be bought either as a set, or made individual elements to order after you have decided on the main accent (in the case of a small hallway, this accent will almost always be a hanger). The tree goes well not only with others. wooden products but also with furniture made of plastic and metal.

In the hallway, you can not do without a hanger. Of course, outerwear can be hung immediately in the closet, but it takes longer and is not so practical. The wall hanger is very convenient for narrow and small hallways, it is quite roomy and does not take up much space.

We offer you 5 workshops on making wall hangers with your own hands from improvised means: wood, leather, branches or pipes, as well as inspiring photo ideas.

This hanger in every sense will display the phrase “I also know how to embroider with a cross”, show your creativity and become good decoration Houses.

materials

In order to create it, you will need the following materials:

plastic or metal panel perforated,
multi-colored floss threads (in principle, threads for knitting are also suitable),
scissors,
hooks (in this case 4 pieces with a ball at the end).

ADVICE: Where can I get such a perforated sheet? In any hardware store or furniture store - ask for perforated sheet. And you will be cut to the right size.

Work order:

We buy perforated sheet of the right size.
Do the usual cross-stitch embroidery with threads, only a larger canvas.
You can choose any word you like, or a simple picture (a heart, for example), the main thing is to calculate that everything fits and the spaces between the letters are the same.
When the inscription is ready, attach the hooks through the holes in the panel and hang the hanger on the wall (you don’t even need to drill holes for the fasteners, they are already there).

Wooden hanger

If you have a pallet lying around in your country house, then this master class will help you find useful application. If there is none, then the hanger can be made from an ordinary wooden board.

Necessary materials:

Pallet or wooden board
Hooks
Paint and paint container
Brush or roller
Protective gloves
Drill
jigsaw
Sander or sandpaper
measuring tape
Pencil
Wood cleaning cloth

Step-by-step instruction:

Step 1: Wood preparation

Separate one board from the pallet (or take a regular wooden board), clean it of dirt. Trim to size if too large.
By using grinder make the surface flat and smooth, if there is no typewriter, you can use sandpaper manually, it will take more time, but the desired result can be achieved.

Step 2: Mark where the hooks will be

Using a measuring tape, mark the points where you will attach the hooks. They can be arranged in one line at regular intervals, or above or below one, as you like.

Step 3: Drill Hook Holes

Make holes for the hooks with a drill (pre-check that the width matches the desired size).
After completion, clean the board from dust.

Step 4: Paint the boards

Choose the color and type of paint, depending on your preferences and interior. Used here acrylic paint on water based bright blue.
The paint can be applied with a roller or brush, along and across the board, evenly filling the entire space, the last ball should go along.

If desired, before painting, you can use a wood preservative to ensure its long shelf life.

Step 5: Insert Mounts

On the back side of the board, insert the fasteners for which you will hang the board from the wall. They should be located symmetrically to each other, relative to the middle of the board.
Hooks were used here, which are screwed into previously drilled holes. They are easy to attach, the main thing is that there is an appropriate diameter.

Create your own design - choose a color, paint patterns, choose the location of the hooks, as well as their color and size. All is ready!

From a copper pipe

This hanger is especially suitable for hat lovers. It is difficult for them to find a place where they would be stored and not wrinkled, in the closet it takes up too much space. Same great option and for use with a direct purpose - for clothing, and for decorating a room. Of course, in addition to hats, a clothes hanger will also fit here.

Necessary materials:

copper pipe
Scissors
Clothespins
Rope

Step-by-step instruction:

Step 1: Prepare the base

Cut the rope just long enough to hang the hanger. Pass the rope through the copper pipe.

Step 2: Attach Hat Hanging Ropes

Cut a few more pieces of rope and tie them to the pipe, leaving enough space between them so that the hats do not interfere with each other later.

Step 3: Hang up the hanger

Attach the ends of the rope with copper pipe to the wall or ceiling (for this there must be hooks or a pipe). Attach clothespins to the ropes hanging from the pipe, now you can hang hats on them. You can also hang a clothes hanger on the pipe.

ADVICE: Choose the length of the pipe, depending on the amount of free space on the wall, hats and clothes.

As you can see, it is done very quickly, even in half an hour you can do it, but it looks very original.

Hanger made of leather belts

Such a wall hanger is suitable for the hallway, and the kitchen, and the bathroom. The type is similar to the hanger described in the previous master class, but its application is more universal. It will beautifully complement the interior of your apartment, while requiring very little effort and time to manufacture.

Necessary materials:

Leather belts (2 pieces of fairly soft leather)
Two small pieces of leather (tougher)
Wooden stick (from a tree branch)
S-hooks
Scissors
Thread and needle (suitable for leather)
Leather punch

Step-by-step instruction:

Step 1: Preparing Belts

cut to desired length two leather belts, they should be the same. Wrap the strap around the stick and mark how much you need for its girth.
In the place where the strap converges after the girth, it needs to be sewn together to fix the stick so that it does not fall out. Do the same with the second belt.
So that the seam is not visible, make decorative leather straps: wrap a narrow strap around the strap attached to the stick at the seam, and sew it, connecting the ends (the same with the second strap).

Step 2: Attach the hanger

With a leather punch on top of the belts (in the center of the width), make holes for hanging this design on the wall or ceiling (on previously attached hooks).

Step 3: Hanging the Hooks

Hang the desired number of S-hooks on a wooden stick and the hanger is ready to use.

From branches and cuts

Branches and cuts are excellent material for a wall hanger. First of all, it's very affordable! And secondly, the tree will never go out of fashion and will perfectly complement the style of any apartment!

From the branches you can make a lot of crafts for the home - about this in the article .

From a pallet

If you are going to make a wall hanger and choose a cheap and fast option, then a hanger from wooden planks or pallets - this is exactly what you need. If you think that it will look ordinary and unoriginal, look at the selection of photos below and make sure that you can create a truly unique thing from these materials that will decorate the interior of the apartment.

Pick a paint (or just treat the wood with an antiseptic, saving natural color), hooks, attach to the board desired shape, come up with your own way to decorate the boards.

More complex hangers can also be made from wood. More precisely, it’s not even a matter of complexity, they are laborious, you need to devote more time to them.

Manufacturing technology of hangers from improvised means

Summing up all the master classes, I would like to derive a single formula for manufacturing and creativity over hangers. Conditionally can be divided:

The basis- can be any item from a finished board to old items.
Hanger hooks- it is not necessary to buy, you can remove them from the clothes hanger.

The basis of improvised means

Also, for manufacturing, you can use things that at first glance are completely unsuitable for this: skis, oars, rulers, etc. How much fantasy is enough. A wonderful way to find a use for things lying around in the pantry.

Hanger hooks

Hooks also do not have to be standard (although their range of choice is quite wide). Start looking at things with the thought “where else can you be applied?”. I'm sure that with a little training myself, interesting ideas will begin to come more and more often, and this applies not only to hangers, of course.

Attach separate hooks to the wall, their design should look like a decorative element, even if there are no things on them.

Wall hanger ideas

More and more designers are coming up with ideas for creative and functional clothes hangers. Sometimes, their designs are quite elementary and not difficult for home implementation.

Metal, of course, is more difficult to work with, but if you want to create such a hanger, it will not be difficult. Make branches in the shape of a tree or hang hangers on a pipe - it will turn out solid and functional.