A small paper chair can be used as a decoration or toy in a DIY dollhouse. You can make such a craft within 15-20 minutes.
To make it, you only need a piece of paper or cardboard and a little patience.
Simple origami paper chair diagrams
A miniature chair is very easy to make using the origami technique. To do this, you need a sheet of paper measuring 20x20 cm. Schemes for manufacturing can be found on thematic sites and downloaded from the Internet.
There are also many books on this technique. However, it is quite possible to experiment and create your own scheme. There are very simple circuit making a high chair, understandable to both adults and children.
Follow the strict sequence of actions:
REFERENCE! An ordinary chair from a simple origami scheme is easy to make in 5 minutes.
IMPORTANT! In the origami technique, strictly follow the recommended steps and try to make all the folds as accurately as possible with the smallest possible error.
Steps for making a chair out of paper with your own hands.
Consider the creation of a chair out of paper in stages. This option is quite difficult to perform and may not work the first time.
Read and repeat the following steps carefully:
- Take a square piece of paper and fold it diagonally twice.
- In this case, each time return the sheet to its original position.
It is important to make the diagonals visible. - Next, you need to get a horizontal fold line. To do this, we also bend the sheet and immediately return it to the unfolded form.
- We take the sides and connect them to each other so that we get a triangle.
- We bend the left edge and direct it to the center. This is a kind of mark at the bottom of the triangle.
- We direct the right tip to the resulting mark, and then tilt it downwards.
- We bend the lower part twice so that the product is thinner.
- We bend a small corner in half and direct it to the left side.
- Next, we straighten it. Insert a thin object into the corner.
- Then we straighten the corner and see a part that is very reminiscent of appearance leg of the future
chair. - Next, you should make another leg.
- In exactly the same way, we get a small but noticeable mark and bend the right side to the center. And we bend the left corner to the right side to the mark and bend the corner back and down.
- Then the lower part must be bent in half.
- All steps for the second leg are repeated in the same sequence. As a result of the work done, the chair already has two supports.
- We proceed to the manufacture of the third support.
- The second part of the right corner is tilted to the left.
- We tilt the lower corner back up to the line located vertically.
- We bend the left side to the right, and point the bottom corner up. We open, straighten and get a small figure in the shape of a triangle.
- We bend in half and get the third leg of the craft.
- The fourth support can be made using a similar and already proven technology as the previous one.
- We bend the sharp corners of each leg up.
- We make the back of the product. To do this, bend the top of the workpiece back in the opposite direction.
An easy way to make a cardboard chair
As a prototype, you can use an ordinary home chair or other furniture. It must be scaled to a miniature format and write all the dimensions of the future craft.
Consider the main steps in creating a cardboard chair:
- We draw on cardboard the components of the future product. These will be four strips for the legs of the chair, two parts of the seat, crossbars, backrest.
- First, let's make the legs of the chair. They are made from a sheet of paper folded into a tube.
- We connect the legs and the first part of the seat with glue.
- After the adhesive has dried, glue the legs to the second part of the seat.
- For greater strength and reliability, we make peculiar crossbars-partitions to the legs of the chair. Everything is like on a real big chair. They make the craft more stable, which makes it possible to put your favorite doll on it.
- We connect the back and seat together.
There is an easier way to make doll furniture:
- To do this, the cardboard sheet must be connected in the form of a cylinder with a diameter equal to the area of \u200b\u200bthe seat.
- Next, you need to put the cylinder vertically and outline the height of the chair and its legs.
- Next, you need to cut out a piece of cardboard in such a way that you get a kind of ottoman without legs.
So that the doll can sit on it, the empty space is filled with paper and the seat is glued. - The chair is ready.
- You can leave it like that, or you can paint or decorate it.
ATTENTION! You can use cardboard of different quality and texture. It can be layered, matte or glossy.
conclusions
In such a simple way, after practicing on a chair, you can make a whole set of things for dollhouse. This requires inexpensive and improvised means, such as cardboard, paper, scissors and glue. There are many worked out simple schemes in the origam technique.
And also such products will be useful for adults as exclusive elements for the interior. You can use more expensive beautiful paper to make small crafts. So, original miniatures look beautiful. For example, it could be a table and two chairs. You can put small dishes on them.
We hope that this article was useful and will help you to make many interesting miniature things.
For children's games, a lot of things are required. In this case, you can not do without, which may require a lot. If the furniture in the toys does not fit in size, then you can make it yourself. In particular, in our master class it is proposed step by step process making a chair out of paper.
For work you will need:
- square sheet of paper;
- scissors;
- scotch.
The final dimensions of the chair will also depend on the size of the sheet. 
Steps to make a paper chair:
Fold the square in half. 
After this, the edges need to be bent to the resulting midline. As a result, two more folds were obtained. 
The square sheet is, as it were, divided into four parts, one of which needs to be cut off. We do this with scissors. 
We fold the resulting workpiece in half. 
We bend its right edge and form a triangular fold in the upper part. 
You also need to do the same with the left edge. 
We bend the right edge of our future chair towards the center. 
We do the same with the left edge. These will be the sides of the future chair. 
Slightly expand the edges and bend the central part up. This is the seat of our chair. 
We give our workpiece the shape of a chair. Now it remains to fix the seat. To do this, you will need scissors and transparent tape. With small strips of adhesive tape we fix the seat from below (on both sides). Our paper chair is ready. 
The little owner of a dollhouse will definitely want to furnish it beautiful furniture and will ask her parents to help her with this. The house must have a sofa, table, bed, chairs and other pieces of furniture. Of course you can buy them. But it can be easily made with your own hands, using a minimum of funds.
Approximate Dimensions
Before thinking about how to make a table for dolls on your own and from what material, you need to decide on the size. It is necessary to build on the growth of the doll itself and the size of the house. The interior will look beautiful if all the furniture is approximately the same scale and style.
The easiest way to make all objects proportionally the same is to calculate the scale. It is necessary to divide by the size of the doll the average height of a person. You will get a number by which you will subsequently need to divide all the real dimensions of the furniture in order to get puppet ones.
For example, the doll's height is 20 cm. Divide the average person's height of 175 cm by 20 cm = 8.75. By this number, you need to divide the actual dimensions of human furniture to get the dimensions of doll furniture.
On average, dolls have a size of 7.5 to 15 cm. If the doll under which this or that piece of furniture is made fits these parameters, the following sizes can be used:
Furniture for dolls from matchboxes
This is just a godsend for creating a dollhouse environment. From them you can create a huge number of pieces of furniture:
An excellent material for making a doll set is cardboard. It is very easy to cut, and it is glued with ordinary PVA or hot glue. From the old cardboard box you can make all the furniture in the house. The only disadvantage of cardboard- this is that without decoration and finishing on top with any material, it does not look very beautiful.
Corrugated packaging cardboard will not last long, as it quickly wrinkles and loses its shape. It is better to use scrapbooking cardboard or just thick cardboard.
Gluing a cardboard bed is quite simple. It is necessary to cut the walls of the bed of the required size and connect them with glue. The back can be decorated with wrapping paper or decorated using decoupage technique.
You can make a bed without the help of glue. The walls will be fixed with the help of grooves cut in the walls.
Production of paper furniture
If it is not possible to buy ready-made doll furniture, you can make it out of paper. How to make a chair out of paper so that it is strong and does not immediately wrinkle? Roll paper into tubes! Craftsmen have been weaving anything from newspaper tubes for a long time. Doll sets will not be an exception. Weaving patterns can be found on the Internet.. Such items will decorate the house and look very cozy. In addition, they will be quite durable if they are painted or coated with several layers of varnish.
For the manufacture of paper furniture will need:
From paper you need to twist thin tubes. This can be done with a knitting needle. They should dry well. Then the tubes need to be glued along with glue. It is better to use a hot gun, so the connection will be stronger and the paper will not get wet.
In this way, small blocks (walls) are glued together, which are then interconnected. They are easy to cut into the desired fragments. For better bonding, you can use wire or thread.
Then shelves and doors are made in the same way.. You need to fix the doors with tape or with wire.
Legs and handles are made from the same tubules, twisted into a roll. The edge must be glued with hot glue.
plywood dolls
A doll wardrobe for outfits can also be made from plywood. He will serve his mistress for a very long time. You can connect the walls and shelves to each other with hot glue or PVA. A hanger bar can be made from a wooden skewer or Chinese stick. Hangers are made from straightened paper clips.
A bed, table and chairs can also be made from this durable material. Some craftsmen even carve beautiful patterns on such furniture, imitating carved furniture. It looks very nice. Plywood needs to be painted or covered with fabric.
It is better to fill the sofa with cotton wool or foam rubber so that it takes shape, and then cover it with a cloth.
The table can be made as a square, and round with a jigsaw. The legs will be wooden skewers or sticks. Chairs are made in the same way.
Furniture from a cardboard box
From one TV box you can make all the furniture in the house. To create it you will need:
- The box itself.
- Double sided tape.
- Scissors.
- Plain wide tape.
- Glue gun or PVA glue.
- Materials for registration.
All furniture must be cut out, cut into the necessary parts and glued.
Next begins the most interesting process- finishing. Cardboard can be painted, pasted over with wallpaper or paper . On the cabinet front or a dressing table, glue a piece of foil, imitating a mirror. You need to make a tablecloth on the table, and pillows on the sofa - this will add comfort.
Be sure to involve the child himself in the decorating process. This is a great opportunity to feel like an interior designer and show creative thinking. Everything will be used: small pebbles, shells, beads, rhinestones, stickers.
After the completion of the design work, the arrangement of furniture in the house begins and filling it with details (vases, figurines)
Of course, the kitchen needs utensils. It can be cut out of cardboard, wood or molded from plasticine. How to make a bottle for dolls is a more difficult question. Here you can use bottles of drops for the eyes or nose, over perfume samples.
Wardrobe made of wooden rulers
Another quick way to create a doll wardrobe. To make one cabinet, you will need about six rulers. You will also need a jigsaw and PVA glue to work..
Cut and sand the rulers so that there are no splinters. Everything was glued with PVA glue. After complete drying of the product, it can be painted. For a beautiful even color, you need to cover the cabinet first with a layer of white paint, and then with the desired color.
In the same way, you can make tables, chairs, bedside tables and other furniture for dolls.
How to make furniture out of clothespins
It is not necessary to use wooden ones, plastic clothespins are also used. They are varied in size and color, but with wooden clothespins, the furniture turns out to be cozier and more beautiful.
To make a table or chair from clothespins, they need to be separated. Halves of clothespins are used, which are interconnected. Connecting them around, make a tabletop, legs can also be made from halves of clothespins.
The beauty of this material is that it can be easily attached to a clothespin desired shape or cut as much as needed. Some make theater on clothespins with their own hands. Templates can be found online.
Making furniture for dolls - pretty fascinating process in which the whole family can be involved. Dad can be involved in creating objects, gluing, twisting and preparing for decoration. Mom and daughter will be happy to paint furniture, decorate it, sew tablecloths, pillows and bedspreads. This is a wonderful family activity that will make the little princess very happy.
Attention, only TODAY!
Modern children's goods stores have everything your heart desires - from simple cubes to complex aircraft models. But sometimes a child needs something unusual, which can be difficult to match the size of their dolls or animals. A child can make many things for his toys with his own hands with a little help from you. For example, you need a miniature amusement park that lacks...
When it comes to the most beloved childhood toys, most adults name a maximum of 2-3 pieces that they never let go of. Any modern child has dozens of different toys. But from this number there will always be the most beloved. For some children, they are miniature toys that are produced by entire families: a family of bunnies, cats, or others.
Sometimes we are all too modest and at the right moment we do not dare to say the main words to our most beloved person. There is one child a year when such words are not only possible, but necessary. February 14 is Valentine's Day. On this day, all lovers (and not only) exchange love messages - valentines. By tradition, they are made in the shape of a heart, but your Valentine should..
What do children usually like to do at home? Play with toys role-playing games, draw, sculpt from plasticine, do crafts and much more. All this together can be called a manifestation of creative abilities. One of the popular techniques for developing spatial thinking is origami. If you want your child to become a creative person, do not be lazy to spend your own or ...
Not every adult will remember the last time he was at the zoo. But the child will not only remember, but also tell in detail who he saw there. For most children, the theme of animals is very close. Of course, each child has his own preferences - someone likes fish and hamsters, and someone loves predators. If there is a little animal lover in your family, then invite her to do it..
Giving gifts is just as much fun as receiving them. At the same time, it is absolutely not necessary that the gift should be expensive. For example, you want to please a work colleague or a good friend, but don't know how. There is an option how to do it simply and tastefully. Write good wishes and put it in an envelope, which should not be postal, but made by yourself. IN..
People face the manifestation of love all their lives. From birth, children feel the love of their parents, and as adults, they themselves surround their loved ones with care and reverent love. Valentine's Day is a good occasion to give a piece of your love to everyone you care about. Perhaps the main symbol of love is the heart. Therefore, a small do-it-yourself paper wreath of hearts...
It is rightly said that it is not the gift itself that is valued more, but the attention. We all want to take care of our loved ones, but we often look for special occasions to do so. Small surprises and gifts do not require solemn occasions at all, they can be given at least every day. You can surprise your loved one by giving him a heart. It is easy to fold it out of paper using the origami technique. Is our..
Most often, the kindest and brightest memories are associated with childhood. Tell me, who in childhood did not sculpt from plasticine and clay, did not glue plastic models tanks and ships, or just didn’t fold a paper airplane? Creativity is still a lot of fun today. For example, the origami technique, which involves folding various paper figures, is popular. We..
Tatiana Titova
Purpose: for game, layout, competition, gift.
Target: continue to teach children to work with paper; learn to cut according to the pattern; paint finished crafts; develop creativity and aesthetic taste.
Material: strips of paper measuring 5cmx15 and 6cmx15; scissors, markers.
1. Organizational moment.
Children, last time we made little men for the collective work "Winter Fun". It turned out to be a beautiful collective composition. And today I propose to make chairs for our characters and other little people that we will put on chairs.
2. Sample demonstration. Look what kids funny toys paper can be made with your own hands, with which you can also play.
2. Demonstration of a method of making a chair from thick printer paper.
What material is the chair made from? (from paper)
Review the pattern with the children.
How will we make a chair according to a pattern? (cut along the solid lines, and bend along the dotted lines).
3. Demonstration of the method of making paper men.
What material is the man made of? (from white paper).
How do we start work? (first cut out, and then bend along the dotted lines).
The little people are very plastic: they can take different poses.
We color the finished crafts with felt-tip pens.
4. Independent productive activity of children.
5. Bottom line. Kids, you did a great job. Come up with names for your characters and play with them.
Thank you for attention!
Related publications:
Educators: Gribanova Svetlana Valerievna, Cherednichenko Natalia Vasilievna Dear colleagues, we want to tell you about the competition, which.
Summary of GCD on creativity - paper design "Frog" in the senior group Topic: "Frog" Summary of GCD on creativity (paper design) in senior group taking into account individual characteristics preschoolers.
Synopsis of productive activities with children of 7 years of age "We make board sports games" Educator Alekseeva Oksana Evgenievna, Sevastopol Program content: Educational: - Enrich children's knowledge about sports.
Conducted by: educator Sidorova S. R Implementation of the content of the program in the educational areas: "Artistic and aesthetic development", "Physical.
Abstract of the lesson in the senior group "Paper Design" Integration of educational areas "Social and communicative development", " cognitive development», « Speech development". Types of children's activities:.
Design in the second junior group "Table and chair for a bear" Design Topic: “Table and chair for a bear” Continue to exercise children in building pieces of furniture, the ability to make the building stable.
