How to wash the laminate so that there are no streaks? How not to damage the coating during wet cleaning? Having accumulated enough experience, I want to answer these questions and talk in detail about washing this flooring.
A few words about the features of the laminate
The laminate has a puff structure, which largely determines the rules for caring for it. The fact is that upper layer- this is a film that protects the decorative layer from damage, and also gives the material a glossy or matte sheen.
Rough cleaning leads to the fact that this film is covered with small and large scratches. Respectively, flooring loses its luster and attractive appearance.
It must be remembered that the floor of the laminate collapses under the influence of moisture. This is especially true for cheap coverage models.
Depending on the resistance to moisture, the laminate can be divided into two types:
- Moisture resistant (wear class 21-23). Able to withstand only short-term exposure to moisture, but not water. As a rule, when the level of humidity and temperature changes environment the coating changes greatly in volume, and the upper decorative layer swells.
Such a laminate can only be wiped with a damp cloth, avoiding the accumulation of liquid on its surface. Moreover, it is advisable to carry out wet cleaning no more than once a week;
- Waterproof (wear class 31-33). Water-resistant HDF board is used as a base, as a result of which the material is less susceptible to moisture. Therefore, even direct contact with water is allowed.
As a rule, manufacturers add the word “aqua” to the name of such a laminate, for example, Aqua-Step.
True, this laminate cannot be called absolutely waterproof either. The fact is that problems can arise if water penetrates under the laminated coating, i.e. into the laminate structure through the slots. Therefore, moisture resistance largely depends on the quality of installation.
But, in any case, prolonged contact with water is undesirable even for the highest quality laminate. Therefore, it is necessary to wash the floor carefully, avoiding accumulation a large number moisture in some areas.
To increase the moisture resistance of the laminate, it can be coated with a special wax-based compound. It will protect the coating from the penetration of moisture into its structure.
Thus, before you start wet cleaning, you need to find out what type of laminate is on the floor.
Wash features
Choice of remedy
So, we figured out the features of this flooring. Now let's look at the best way to clean laminate floors.
I must say right away that detergents containing abrasive particles must be discarded, as they will scratch the top film, and the coating will never shine again. Therefore, exclude powders.
In addition, it is necessary to exclude chemical substances, which can react with . These substances include:
- Strong disinfectants or bleaches;
- acids;
- alkalis.
It is best to use special detergents for laminate flooring. As a rule, they include the following components:
- Organic soap base;
- Perfumes for flavoring;
- Glycerol;
- disinfectant antibacterial substances;
- Alcohol.
The price of a laminate cleaner depends on the manufacturer:
In addition, there are folk remedies that allow you to qualitatively wash the laminate from stains and other contaminants. The most effective of them are the following:
- Table vinegar or lemon acid;
- Vodka or medical alcohol diluted in soapy water.
If the surface of the laminate is scratched or stained chemicals, it can be restored. For this, there are special repair kits that include wax. The damaged areas are covered last.
The nuances of washing
Wet cleaning. Now let's look at how to clean the laminate floor so as not to damage the surface and achieve a shine. In this way, you can wash any type of laminate, regardless of its moisture resistance.
The process of washing the floor looks like this:
| Illustrations | Description of actions |
 | Inventory:
|
 | Preparation. Remove dust from the floor with your own hands so that there are no streaks after washing. It is advisable to use a vacuum cleaner or a soft broom for this, so as not to scratch the floor surface. |
 | Floor washing:
As a rule, it is possible to wash the floor to a shine the first time. If the floor was heavily soiled, you can repeat the procedure. |
If you use hot enough water for cleaning, it will quickly evaporate, so additional wiping the floor with a dry cloth is not required. If the floor is damp after cleaning, wipe it with a napkin.
If after wiping there are stains, then your rag does not absorb moisture well. Therefore, it is best to use cotton rags for these purposes.
Approximately the same should be washed the floor using detergents. To make it shine, one or two caps of the product per liter of water is enough.
Detergents should be used no more than 1 time for 3-4 washes. Wash the rest of the time clean water or with the addition of vinegar. This will extend the life of your flooring.
Cleaning with a washing vacuum cleaner. Housewives are often interested in - is it possible to use a washing vacuum cleaner to clean laminate flooring? Not so long ago, these concepts were simply incompatible, but in Lately the situation has changed.
Many modern models vacuum cleaners have a gentle cleaning function. They usually have special nozzles, and manufacturers indicate that they are suitable for this flooring. True, only waterproof laminate can be washed in this way.
If the instructions for the vacuum cleaner do not contain information about the presence of this function, it is better not to take risks and wash the floor by hand.
Conclusion
Now you know how to wash a laminate without streaks, and at the same time not damage it. Watch the video in this article for more. If you have any questions, ask them in the comments, and I will be happy to answer you.
Laminate is a type of flooring that is a great alternative block parquet and wood mass. The top layer of the laminate has a special protective covering resistant to almost any type of pollution and mechanical damage. It is much easier to maintain than natural wood flooring. However, if elementary rules are neglected, scratches and soap stains will remain on the surface.
In the arsenal of any housewife there is an impressive range of detergents that can cope with any kind of dirt, including stains of increased resistance. Not all of these products are suitable for wet and dry cleaning of laminate. In order not to damage its top layer, it is recommended to completely abandon:
- products based on abrasive materials containing solid particles - they leave on smooth surface deep scratches;
- compounds containing caustic alkali - it destroys coatings made of acrylic resins;
- concentrated soap solutions, since they are poorly removed from any surface and leave stains;
- acid-based compounds - they gradually dissolve the protective coating of the laminate, reducing the service life;
- bleaches - strictly prohibited for cleaning by all manufacturers of laminate boards;
It is not recommended to use products intended for cleaning sanitary ware (Domestos and similar compounds). They are based on chemically active substances that corrode the protective coating and damage the texture. Responsibly, you need to approach the choice of inventory: hard brushes, washcloths with metal bristles are completely excluded.
The right choice of equipment and detergents
Before you start cleaning, you need to prepare the tools that may be required in the process. To wash laminate flooring you will need:
- a bucket for water and preparation of a detergent composition;
- whisk for home cleaning with soft bristles;
- washing vacuum cleaner with a nozzle for delicate cleaning;
- dry cloth or napkin;
- mop with a microfiber cloth.
Steam cleaners or washing vacuum cleaners are used carefully during the cleaning process so as not to spoil the coating, and are not suitable for all types of laminate. If the boards stick together lock connections, it is better to refuse such devices: microscopic particles of steam or moisture will penetrate into the cracks. As a result, the wood fiber base will swell, the fixation density will be broken, and the floors will swell.
No less responsibly you need to approach the choice of means for washing. The following products are recommended for cleaning laminate flooring:
- Mr Propper;
- Glorix;
- Buggy;
- Emsal;
- laminated clear;
- Loba;
- Qick step.
The protective coating of the laminate prevents dirt from penetrating deep into the structure, so it is not necessary to use household chemicals. Surface contaminants are well removed and folk remedies. With dirty traces, for example, hair shampoo does a good job. In this case, it is recommended to use products intended for children: they do not contain chemically active components and aggressive substances. Alternatively, you can use a 9% vinegar solution. It is recommended to pre-dissolve the product in water, observing the following proportion: a teaspoon per liter of liquid. The disadvantage of this method is a specific smell, which disappears only after airing.
You can wash the marks left by the shoes with lemon juice, a glass of which must be added to a bucket of water. A school eraser can also cope with this task. Paint or marker prints, which often remain on the laminate after repair, are removed with alcohol. It is not recommended to use stronger and more concentrated solvents for these purposes: they adversely affect the protective coating.
Important! If scratches remain on the surface during the operation of the laminate, they can be painted over with special wax-based pencils. To do this, you need to choose the right color and preheat the pencil in a steam bath to give it more plasticity.
Cleaning procedure
In order for the laminate to shine after cleaning, the process of washing the floor covering must take place in a certain sequence. Following the instructions, you can completely eliminate the appearance of soap stains, streaks and damage to the protective film:
- First, dust and small debris must be removed from the floor using a soft cloth or broom. Neglecting this advice will cause the grains of sand remaining on the surface to act as an abrasive stone, scratching the coating. To avoid streaks, it is recommended to sweep dirt and dust from all corners.
- It is recommended to wash the laminate along the dies, following the course decorative pattern. In this case, minor stains, even if they remain, merge with the surface and remain invisible to the eye. Water should be changed as often as possible: even slightly cloudy water can leave stains on the floors after drying.
- At the final stage, the floor is wiped with a soft cloth. If you add 2-3 drops to the fabric olive oil, you can give the surface of the floor shine and gloss.
Important! Laminate flooring is very sensitive to water quality and damp environments, so it is important to wring out the cloth thoroughly to prevent puddles from forming on the surface.
Washing vacuum cleaner
Most housewives have not washed floors at home for a long time, preferring to use modern washing equipment. It is not always advisable to use a washing vacuum cleaner for a laminate floor. Most of the models in this category are simply not designed for cleaning glossy surfaces, so they can leave streaks or scratches on the surface. In addition, not all varieties of laminate are designed for mechanical cleaning.
Equipment requirements are no less high. For wet cleaning, it is recommended to use the latest generation of vacuum cleaners, which regulate the water supply depending on the type of flooring. In the kit of such models there are adapters for glossy surfaces and absorbent nozzles that instantly remove moisture from the floor.
Choosing the right gloss finish for your laminate floor is not difficult, but it is much more effective to prevent stubborn stains and stains from appearing on the surface. deep scratches. Laminate is considered a durable coating that can last without losing its external gloss and specifications up to 15 years old. Of course, if the rules of its operation are observed. Manufacturers recommend that you strictly follow the following tips:
- can't walk on interior spaces in street shoes or shoes with high heels;
- furniture legs must be installed on felt or rubberized linings;
- you can not move heavy objects on the laminated floor dragging;
- it is necessary to immediately remove street dirt and sand accidentally falling on the floor;
- spilled liquid must be immediately removed with an absorbent cloth or soft cloth;
- it is recommended to regularly rub the floor with wax-based compositions that restore the damaged protective layer.
Dry cleaning of the laminate is usually carried out every other day, wet cleaning - no more than twice a week. Use funds for deep cleaning or glossy surfaces are recommended no more than once a month. If the windows of the apartment face the sunny side, during the daytime you need to draw the curtains or use the blinds: this will protect the laminate from direct UV rays and protect it from fading.
If you want a shiny floor, then consider this criterion when buying laminate flooring. Glitter helps keep proper care: vacuum more often because grains of sand and solid debris scratch and overwrite the upper glossy layer, wash with clean warm water, you can add a little vinegar to the bucket, liquid soap or a special tool. Don't forget to wipe the floor dry afterwards. Below we will tell you in detail: how to wash the laminate so that it shines at home, and what is not worth it.
Laminate is a modern, high-quality floor covering that does not require complicated maintenance. Manufacturers made sure that in the conditions of lack of time, housewives could maintain cleanliness in the house without extra labor. Whether it will shine for the most part does not depend on the method of cleaning, but on which laminate you choose in the catalog. There are several types of coating with varying degrees of gloss, let's figure it out:
- Normal - smooth, with a modest luster, imitates wood of various species.
- Matte - gloss is completely absent, very practical and easy to care for, after washing there are no streaks left, wear-resistant. It looks noble and unobtrusive, the variety of colors and patterns allows you to choose suitable coating for anyone design project. Of the minuses: it quickly absorbs coloring impurities: wine, brilliant green, ink, etc.
- « Shea tree"- looks like a tree covered with drying oil.
- Laminate with a "waxed" surface - similar to natural wood waxed. Moderate sheen creates a warm and cozy atmosphere.
- Laminate "lacquered wood", the name speaks for itself.
- Glossy (mirror) - visually expands the room, reflects surrounding objects and sunlight, very popular. Cons: stains remain, any specks, scratches and greasy stains are visible, from bare feet or after children's games on the floor.
If you want your laminate flooring to shine, choose glossy, lacquered wood, waxed or regular.
You should not try to make a glossy laminate from a matte laminate with a polish or wax intended for parquet, you will only spoil the coating. After we have made a choice, let's discuss how to wash the laminate to make it shine.
How to care for laminate flooring
Keeping the laminate clean is not at all difficult; there are some rules that you need to know and follow so that the material retains its beauty and shine for as long as possible:
- Keep a dustpan and a broom close at hand, small crumbs and grains of sand abrade the surface over time. Dry clean daily with a soft brush or vacuum cleaner.
- The laminate is washed no more than 1-2 times a week with a soft rag, a mop with a foam roller or a flooder. It is very important to carefully wring out the rag, because if water gets into the joints, the laminate will swell and the plates may “lead”.
- To care for the lamellas, ordinary warm water is enough. If it is very dirty, you can add a couple of caps of liquid soap, dishwashing detergent or shampoos, do not forget to wash off the remaining foam with clean water. Specialist. means do not need to be washed off.
- Change the water in the bucket more often, then there will be no streaks left.
- After washing, the floor is wiped dry soft cloth so that there are no whitish spots from dried water and stains.
- Choose your care products carefully. The acids, ammonia (ammonia), caustic alkalis, glycerin and small abrasive particles included in the composition destroy the upper protective layer, the material wears out and loses all its attractiveness.
- Wipe up spilled liquid immediately.
- If you dropped a sharp object and a chip formed, then it should be filled with a special putty as soon as possible. ТМ Quick-Step or wax pencil NOVORYT, homa, clou or any other. It is good to polish the place of the chip and varnish it for laminate, if this is not done, then the material will gradually collapse.
Before using an unfamiliar product, test it on an inconspicuous area, under a carpet or behind a cabinet, to make sure that the shine has not faded and the color has not changed. Only after that proceed to washing the entire floor.
Laminate is a modern flooring material that has gained unprecedented popularity in last years due to its merit. Durable, environmentally friendly, wear-resistant, with a beautiful appearance, it is able to make the floor of the apartment warm and cozy.
Proper care is the key to a long life of laminate flooring.
The structure of the laminate is something like a layer cake, where the top film is the most important part. It performs a protective function, protecting from chips, scratches, dust, traces of heels. Therefore, it is important to take care of the proper care of the condition of the laminate. It will be possible to extend the service life of such material if you follow simple rules.
- The biggest enemies of laminate flooring are dirt and sand. So that they do not spread around the rooms and do not scratch the floor covering, a well-rubberized rug should be placed in the corridor.
- To minimize the likelihood of damage to the top layer, you can line the legs of chairs and tables, as well as other furniture that you often have to move with soft felt.
- It is necessary to clean daily with a vacuum cleaner or a broom, and wet it 2-3 times a week.
- Since laminate is sensitive to water, you should not use a vacuum cleaner that leaves a lot of moisture behind.
- Removal of oil stains, traces of paint, markers, stripes from rubber soles from the floor is carried out using a clean cloth and neutral detergent compositions.
- To get rid of traces of sauce, juice, beer, wine on the laminate, plain warm water or a weak solution of neutral detergent will do. At the end of the wet treatment of contaminated areas, it is necessary to wipe this area with a dry cloth.
- Adhering chewing gum or wax is pre-cooled with an ice cube, after which it is gently scraped off.
Over time, the laminate can fade. This situation is completely fixable. It is enough to use special means that can return appearance floor its original luster. These are compounds used to rub the top layer.
Buying and installing laminate flooring is half the battle. It is important to wash it properly so as not to damage the surface. The modern market offers a large selection of special products designed to care for this type of coating. But there are also such compositions, the use of which when cleaning a laminated floor should be excluded.
Detergents, the use of which is allowed when cleaning the laminate:
- a soft cloth or mop equipped with a special nozzle;
- certain detergents produced by laminate manufacturers for their product;
- a variety of compositions used in the cleaning of the apartment;
- alcohol or acetone will help to eliminate difficult stains;
- allowed to use laundry soap, means for ware, shampoos;
- polishes designed specifically for laminate surfaces;
- broom, vacuum cleaner.
Important! It is not recommended to use detergent compositions to treat the surface of the laminate every time you put things in order. Most best option– 1 time in 4 cleanings. It can be even less often, depending on the degree of soiling of the floor.
Detergents, the use of which is not allowed when cleaning laminated surfaces:
- cleaning powders;
- abrasive compounds;
- solvents;
- hard rags, metal brushes;
- liquids containing acid;
- products used for cleaning parquet and parquet boards;
- formulations containing mastic or wax.
The danger of using such products is reduced to a high probability of damage to the surface layer, which, in turn, significantly reduces the life of the floor covering.
- First you need to remove the larger debris and vacuum the floors. Things and pieces of furniture that will interfere with cleaning, it is better to take out for a while to another room.
- After that, the composition is prepared, which will wash the floors. You can add half a glass of distilled vinegar for every liter of water (ammonia is an alternative). These additional nuances neutralize the negative effect that water can have on the laminate flooring. To prevent stains on the floor, it makes sense to add a third of a glass of alcohol to the water.
- A rag soaked in the prepared liquid is carefully squeezed out. It wipes the floors along the laid planks of the floor covering. If a mop is used to wash the laminate, then it should be normal, without the spin function. At the end of the procedure, you need to allow the coating to dry. It is not recommended to use dry pieces of cloth for this, it is enough to open the doors and windows.
- If it is necessary to process a small area of the floor, then it is not necessary to wash it all at the same time. It is enough to use special cleaning products that are available in the form of sprayers. Such a drug is applied to the problem area on the surface and wiped with paper towels.
Washing vacuum cleaner and laminate
Many housewives are wondering - is it possible to use a washing vacuum cleaner when cleaning a laminate floor? In fact, the principle of operation of such a device is reduced to the spraying of water and its subsequent collection. But laminate flooring liquid is destructive. Therefore, the use of such a mechanism is undesirable.
You can, of course, clean the floor with a washing vacuum cleaner, and carefully wipe the remaining moisture. But this will significantly complicate the cleaning process. The best option is to treat the surface with a conventional vacuum cleaner with a soft nozzle, after which wet cleaning is carried out according to the instructions described above.
Laminate manufacturers guarantee that when correct operation such a coating can last from 10 to 30 years. If in practice you follow all the recommendations listed above, then laminated floors will serve faithfully in your home for a long time to come.
Video: how to care for laminate floors
Many housewives simply do not know how to wash the laminate to make it shine, what kind of laminate cleaner to use. And meanwhile, the correct care of a laminate floor will greatly extend its service life.
A laminate is made from wood, and it is a panel pressed from wood chips, and covered on top. decorative film. Laminate is a very beautiful and environmentally friendly coating, but it requires careful care and respect.
You can use both special and home remedies
Laminate care at home is, first of all, washing it with by special means. If you use regular powder, you can leave whitish spots on the coating.
You should always have a soft rag and a special brush on hand in case something spills or crumbles on the floor. Caring for laminate flooring in an apartment is the instant removal of all contaminants as soon as they appear. Remove any dirt in the laminate should be immediately.
How to care for the laminate in the apartment, if a stain appears on the coating? To remove stains, you will usually need an alcohol-based glass cleaner. Such a tool is sprayed on a speck, which is then erased very easily with a soft cloth. You should not use aerosols that contain ammonia, as they spoil protective film on the cover.
Laminate is a very elegant flooring, but it is quite troublesome to care for. Caring for a laminate floor consists of regularly washing, polishing and masking scratches as needed.
Special formulations for the care of this coating already contain substances that perfectly cope with any pollution. Just dilute the solution according to the instructions and wash the floor. But there is also a proven recipe: a spoon table vinegar diluted in 5 liters warm water and wash the floor. These products have always washed mirrors and glass, and indeed, any glossy surfaces. Laminated flooring is no exception.
It is necessary to wash the floors from the window. So you will not move on a freshly washed floor, and it will dry without leaving marks.
For convenience, it is better to use a mop (if you like mops), which has a rag wringing mechanism - so the floor will not be excessively wet. When washing by hand, use microfiber cloths, as they clean the coating better than others.
And don't forget, cleaning the flooring shouldn't be very wet, it should only be slightly damp. If there are stains on the floor, then you are not wringing the rag well enough.
What is the best way to wash?
How to properly wash laminate floors, and which mop is best for this purpose? Before washing the laminate, you need to choose a device that will help wash the coating as efficiently as possible.
Check out our tips to make your laminate last longer.
Types of modern mops for laminate
- Universal mop. This mop is a device that is useful not only for washing laminate flooring. The universal mop has ends with which you can wash not only the floor, but also glass. Typically, these mops come with various nozzles for washing. different coatings and materials.
- Simple household mop. It is a very convenient and at the same time simple device with a retractable handle and a movable platform. With such a mop, you can get any area under the furniture and wash any corner in the apartment without torment. Mop heads can be different materials and they are easy to remove and clean.
- Professional mop. This mop is made for cleaning large areas. They are equipped with a very strong handle and a platform that can be rotated around the axle.
What rag to use?
If you are faced with the question of how to wash the laminate after repair, then definitely, it is best to do this with a rag, using an additional laminate detergent. How to wash the laminate with a rag and which rag?
When choosing a mop, consider the characteristics of the floor covering
Cleaning laminate flooring with a cloth detergent and water. This will ensure that your parquet shines and you can rub it and eliminate scratches. Laminate flooring loves careful maintenance, does not like excess moisture. That's why choose rags that absorb water well, do not wet the laminate floor too much when washing it. The rag should be made of natural fabric and be sure to be soft. Many housewives note that it is much easier and more convenient to wash the laminate with a rag than with a mop.
Daily housekeeping
There are many ways to clean laminate flooring. There are a wide range of products on the market that can clean a laminate floor in minutes. Meanwhile, there are household detergents that can be used to clean laminate flooring. There is a paste specifically for laminate flooring that can be used to rub the floor to make it shiny.
The main rule for washing laminate flooring is to try it on an inconspicuous area, for example, under a carpet or furniture. If there are no traces and stains, then the product is suitable for your floor.
Supporters of a safe and cheap way to wash the laminate without streaks and cleanly can be recommended to wash the floor with warm water, to which a couple of spoons are added to the bucket table vinegar or lemon juice. You can also use ordinary dish detergent, diluting it quite a bit in a bucket of warm water. So you can save money and wash the laminate cleanly.
If you take good care of your floor, it will serve you for many years. If you do not know how to wash the laminate from stains, then try the usual glass cleaner. Marker stains and ballpoint pen, and in general, ink stains can be removed with white spirit.
Very often there are traces of rubber soles on the floor. You can just get rid of them
rubbing the contaminated area eraser for a pencil. From greasy spots get rid of with washing soap- rub a rag with soap, then lather the laminate and leave the soapy area for a few minutes, and then rinse with warm water.
Test any product on an inconspicuous area before use.
The coating can be perfectly washed with special means for the care of such a coating. Read the dosage instructions carefully so that you do not end up with a solution that is too concentrated, which can harm the skin and laminate.
A good tool, inexpensive and gentle, for washing lamin without streaks is a simple baby shampoo.
Washing with a steam cleaner
Laminate can be washed with various special and improvised means, but some housewives would like to wash the laminate with a steam cleaner. Can it be washed with a steam cleaner?
Steam is the same water, but in the form of a gas. It is better not to wash the floor with a steam cleaner, as steam particles penetrate deep between the joints, destroy the integrity of the floor and lead to deformation.
How to wash the floor without streaks?
Can laminate flooring be washed with water using a washing vacuum cleaner? Before you start washing your flooring, find out how much it is afraid of water. If your floor is not moisture resistant, regular vacuuming will ruin it. The fact is that during the operation of the vacuum cleaner, water is sprayed on the floor. If such care is optimal for linoleum, then it can hopelessly spoil your floor. But if your coating is moisture resistant, then a washing vacuum cleaner is a good option, which makes it easy to wash the laminate so that there are no streaks on it. The washing vacuum cleaner carefully to clear coverings, giving it gloss.
The easiest way to clean laminate flooring without streaks is to do it by hand with a mild detergent. A soft, natural cloth cloth and a little soap will work wonders to keep your floor perfectly clean and shiny.
What to do to remove scratches?
If you find a scratch on your floor, don't freak out too soon - the scratch can be repaired. How to restore the laminate from scratches with your own hands, without re-laying the floor?
Use a wax pencil in the color of the laminate
An easy way to get rid of scratches is to cover them with a special wax pencil. Just pick up a pencil suitable color and fix the defect. There will be no trace of a scratch.
You can do it with ordinary wax. A wax candle will help to get rid of scratches on the laminate, which must be rubbed on the defect. Refurbished laminate should be washed gently to avoid removing the wax. It is best not to use scouring powder, as it will only exacerbate the problem.
If there are scratches on the laminate, then how to remove them, at least for a long time? The best option how to save the coating is to use wax or paste specifically for laminate. These products are applied in a thin layer and create a protective film that lasts a long time and hides defects.
We remove scuffs
Most often, scuffs on the coating appear in places common use- in the corridors, in the kitchen, on the thresholds. If you lay a coating with poor wear resistance, then you will not avoid scuffs.
In caring for such a floor, it is important to use a protective coating, so that later you do not have to solve the problem of how to get rid of scuffs.
Wax, just like removing scratches from a laminate, it helps to hide scuffs. To do this, rub the worn area with wax, going a little beyond its border. The area is then polished with a soft cloth. You will have to constantly wax the floor to protect the coating from wear.
Wash after repair
After repair work the main task of the hostess is to properly wash the coating so as not to spoil it. Traces from construction works in any case, they will be on the surface, and cleaning them can turn into real torture. How to clean laminate floors after renovation?
Paint and lime are best removed mechanically.
- First of all, you need to collect all the rubbish from the floor surface. A broom will help with this.
- Then the impurities are washed off, for example mounting foam, special means with alcohol.
- If there are scratches on the floor after work, they will have to be masked with wax.
- The final stage is washing with a special soapy detergent so that no white streaks remain on the coating after puttying.
Polishing the finish to a shine
Although home remedies such as vinegar can be very effective in brightening up the finish, it is better to rub it with chemical mixtures. In addition, the floor is polished at least once a year to keep it shiny and new looking.
When choosing a product for polishing your floor, consider the difference between the composition for laminate flooring and parquet. Miscellaneous should be used as directed and not mixed.
What is the best way to clean laminate flooring to make it shine? Any special composition for washing the coating will do. You will need to dilute one or two capfuls of the product in a bucket of warm (not hot) water, and then mop the floor, preferably with a rag or microfiber mop.
Before washing, you should collect all the debris with a broom or vacuum cleaner, then wash the floor and wipe dry with a dry, clean cloth made of natural fabric. That's it, your floor shines clean and shiny!
