Do-it-yourself children's slide for a country house or dacha. Children's slide for the dacha: photos, videos, drawings How to cover a wooden slide to make it slide

On the site next to country house or dacha, families with small children often equip a place for active games. Depending on your financial capabilities, desires and area of ​​the plot, you can choose one or another option. This could be a whole playground, a sandbox, a swing or a slide. Many designs can be purchased at finished form, or you can assemble it yourself. You will learn how to make a children's slide with your own hands from the article.

Construction rules

Before you figure out how to make a slide for children with your own hands, you should study the rules for its construction and installation. You need to remember the following:

The slide must be stable, functional, durable and attractive appearance. Its base can be concreted or use metal supports. All structural elements should be sanded and varnished.

Be sure to take into account the age of the child; if we are talking about preschoolers or primary schoolchildren, then the height of the slide should be a maximum of 3.5 m.

Types of children's slides

You need to choose the sizes and materials for a homemade slide depending on where exactly it will be installed. For example, if you need to make it not for the street, but for the room, then it should be small, and for production they use materials such as:

• laminate;
• plywood;
• wood and more.

The principle of their manufacture does not differ from the work on the construction of street slides, but we are talking about much smaller dimensions.

And if we are talking about making an option for the street, then you should decide on the material, since working with each of them may differ. And the properties of this or that material also differ; they have their pros and cons. Their characteristics are:

Using the last option as an example, you will learn how to build a slide with your own hands for the street. After all, it is wooden slides that are most often installed in dachas.

DIY wooden slide

Since wood is the most available material, then for construction with their own hands they use it. In addition, a wooden structure is easier to repair and easiest to install. Unlike metal structures, you do not need to use a welding machine or other complex equipment.

Works on construction of a wooden slide begin with preparatory activities. How successful the result will be depends on how correctly you perform them. At this stage you will need to do the following:

• at the site where the slide is installed, remove the fertile soil and level the soil;
• fill the area with sand and let it settle, compact the soil;
• prepare wooden blanks (for example, boards for feet, timber for the base, railings or stringers and more), dry them, saw them according to the drawing and sand them well. Then saturate them with the protective mixture;
• paint the steps, handrails and boards for the “tunnel” in two layers of enamel, taking into account intermediate sanding;
• prepare the side elements for lining the tunnel and side and treat everything with impregnation.

When the preparation is completed, you can create the basis for the future structure and perform subsequent actions. The algorithm is like this:

Naturally, there are different manufacturing options. It all depends on what kind of design it will be. Perhaps it will consist of two slides different sizes And additional elements. It will be more difficult to do this on your own.

Materials for the ramp

Even the slope itself can be made based on various materials. In addition to plywood, the following may be suitable for it:

• sheet of plastic (has the most best characteristics slip-resistant, but may crack);
• galvanized sheet 0.5 mm thick;
• linoleum.

In addition, the wood can be polished with wax. Some people line the slope with laminate, but this is not recommended, since laminate tends to deform under load or moisture.

Ensuring safety and durability

During construction, it is necessary to follow a number of rules so that the structure lasts as long as possible, and parents do not worry about the safety of the child.

In particular, secure each structural element as securely as possible. It is not recommended to cover a finished wooden slide with plain oil paint. It is better to use acrylic coating or high-quality varnish. At least this applies to the slope as the most used part of the product. Decorative coating must be applied in several layers, each one must be dried before applying the next one.

The covering of the ramp will wear off over time, so it needs to be properly cared for. Each time before painting, the surface should be sanded, all deformations on the boards should be eliminated, and cracks should be filled. And only after these steps the surface is covered with paint.

To ensure your child's safety while playing, remember the following:

• Periodically, the wooden slide needs to be inspected to see if there are any deformations or cracked joints on the surface. This is especially important after winter;
• It is better to install the slide in the shade, preferably so that it is clearly visible from the window;
• There should be no plants that cause allergies, poisonous or thorny plants. And honey-bearing flowers can attract bees, which can be dangerous for children;
• No pipes, electrical cables or hoses should be placed near the slide.

If the slide will be made for common use, then there should be enough space around it for several children to be there at the same time.

When constructing a slide, you need to carefully plan everything and take into account all the risks. Regardless of what material is used, you need to carefully study its properties.

Now you know how to make a slide with your own hands in the country or near a country house. You just need to select the right materials for the job and follow certain parameters. Over time, you will be able to add swings, equipment, a carousel and other devices to the slide.

A children's slide is one of the favorite pastimes for kids, and parents don't mind sliding down it either. Previously, on every playground there was metal structure, today it is a bright and colorful structure made of wood or plastic.

Today, a children's slide can be purchased in a specialized store and it will no longer be just a structure with steps and a descent, but a whole play complex. Of course, not every family can afford to buy such entertainment. But if you want to please your child, then you can make a children’s slide with your own hands.

When buying a ready-made slide in a store, you are not always sure of the quality of the product, but if you make it yourself, you can slowly take into account all the safety and security nuances. minimal costs get a safe and high-quality design.

The first thing you should worry about is the safety of the child. All equipment used on playgrounds must comply with GOST. For example, the slide should be equipped with railings and sides of such a height that the child cannot fall out or get stuck while playing. The lower part of the descent should have a smooth curve with a radius of at least 5 cm at a height of 20 -30 cm from the ground.

There should be no electric lighting devices, outbuildings, trees, etc. near it. It is not recommended for a child to spend a lot of time in the sun, so at least part of the structure should be in the shade.

It must have the following characteristics:

1. strength;
2. sustainability;
3. functionality;
4. attractive appearance.

The structure must be well secured; you can concrete it or use metal supports. All parts must be sanded and varnished. The size of the structure must correspond to the age of the child; for children of primary school age, the height should not exceed 3.5 meters.

Material

To build a children's slide, you must use environmentally friendly materials. Most often, such structures are made of wood or metal.

The installation process will vary depending on the material chosen. Wood and metal have their own characteristics, which you need to know and take into account at the selection stage.

Children's slide made of metal

To build a metal slide you will need electric welding and skills to work with it. It is also worth considering that the metal heats up during welding and can become deformed.

Therefore, the final result, without at least minimal knowledge of working with metal, may not meet expectations. But despite this, the metal structure has such advantages as:

• durability;
• strength;
• reliability.

However, we should not forget about the disadvantages. The main disadvantage of a metal slide is that it heats up in the sun and the child can get burned. Therefore, such a structure will have to be installed on the shaded side of the garden plot.

And one more minus - if a metal slide is installed at the dacha, then there is a high probability that it will be stolen by the ubiquitous scrap metal collectors.

Wooden slide

One of the advantages wooden structure is ease of installation. The work does not require special and expensive tools. Basic tool set:

1. jigsaw;
2. drill;
3. grinder and attachments for it;
4. hammer.

Anyone can use this tool. Wood has virtually no disadvantages, and those that can be found can be easily corrected. For example, to protect it from moisture, it is enough to treat it by special means and varnish.

The choice of material is up to you. And if you are the first to make such a structure and have never worked with welding, choose wood.

Construction process

The first step is to make a drawing. You can use a ready-made layout or come up with your own. Then, in accordance with the drawing, prepare the material: cut the timber to size, sand and plan the logs and boards. All structural parts must be chamfered from the corners so that the child does not get injured.

Then an area measuring 2 × 2 m is marked out, more is possible if there is a possibility and in the future it is planned to create a children's playground. Use a garden drill to make depressions 60 cm deep in the soil. waterproofing material The pillars are installed in prepared holes and concreted.

In the upper part of the beams, grooves are cut with a hacksaw or a router into which the planks are inserted. The planks are attached using self-tapping screws and perform two functions:

1. strapping - the structure becomes stable and more rigid;
2. fencing - ensures the safety of the child on the slide.

Now you need to attach two more planks to the beams, the ramp will be attached to one, and the ladder to the other. The plank floor is secured to these planks with self-tapping screws.

The fence should rise at least 10 cm above the plywood; this will prevent children from flying out of it. All joints of wooden parts are additionally fastened with corners.

When the slide is completely assembled, sanding and painting begin. All elements are cleaned of burrs grinder, A sharp corners grind down.

Now you can apply it to wooden surfaces varnish or paint. To make sliding better, you can additionally attach a sheet of tin to the descent.

Nothing brings more joy to a child than going down a slide. So why not put this play structure on summer cottage so that children can climb it whenever they want? Of course, it is easier to buy than to make. But there is no guarantee what manufacturers use to make slides quality materials and do not violate technology. Parents who think about the safety of their children take on the construction themselves.

Which slide to choose - metal or wooden?

The manufacture of slides mainly uses wood and metal. The selected material influences the manufacturing technology, because any construction raw material has its own characteristics.

Wooden slides in classic version built with an upper platform in the form of a house and comfortable steps. All parts of such slides are connected using fastening elements. Every detail must be polished so that the child does not get hurt. It is important that all boards used in construction are smooth and dry.

Metal slides usually look simpler: a small platform, a ladder made of pipes and a ramp. The supports for these elements of the structure are usually poured with concrete. Metal slides are most often painted.

Only those who know how to use a welding machine can undertake the creation of a metal slide. It is impossible to fuse metal parts without welding skills - in inexperienced hands, the material heated by welding will bend and become unsuitable for construction.

A table will help you make a choice in favor of one material or another, indicating the pros and cons of using metal and wood when building a slide:

The listed disadvantages of wooden slides can be combated if you periodically cover wooden parts slides with special protective agents and varnish.

The choice is yours. But manufacturers offer to purchase slides, some parts of which are made of metal, and others of wood. Thanks to the combination different materials, the game design seems more interesting.

Ideas for creating slides

Creative design of a wooden slide Wooden slide under the roof Wooden slide with metal slope
Wooden slide with a large platform and stairs on both sides Metal slide under the roof Low metal slide for children younger age
Simple metal slide This structure has a simple wooden slope Thanks to the curved bars, this slide looks unusual

Step-by-step production of a wooden slide

Any construction begins with the execution of drawings. They will tell you what materials, in what quantities, will be needed, and most importantly, they will give a clear idea of ​​the scale of the work. These drawings should reflect the dimensions of the base, descent and stairs of the structure.

A simple wooden slide with a long slope

The height of this structure is 3 meters, the length of the slope is 6 meters. The site is located at a distance of 2 meters from the ground. The length of the handrails, which are attached to the structure on the sides of the descent, depends on these numbers.

But if a wooden slide is being built for a child under 4 years old, then you need to sketch out on paper a drawing of a small structure with a short slope and a ladder of a couple of steps.

Among the tools you will need to arm yourself with a drill, saw, screwdriver and shovel. At the very beginning of the work you will need sandpaper, and upon completion - stain and color emulsion. Instead of paint, you can use wood varnish.

Necessary materials

To build a wooden slide, you need to purchase the following materials:

• 8 boards;
• 4 thick beams 0.6 meters long and one 2 times thinner 0.8 m long;
• Several sheets of plywood;
• 2 round wooden profiles.

Instructions

1. The process of building a slide should begin by cutting all wooden elements, while being guided by the drawing. Bars and boards need to be sanded sandpaper, and then round off the sharp corners;
2. Now it’s time to make markings on the ground and drill holes in the ground to install the bases of the beams in them. The bars will not move from their place during the operation of the slide if their base is filled with concrete;
3. Taking a saw, you need to create recesses at the top of the posts. They are needed for fixing planed boards. The supports must be attached to each other using self-tapping screws. The structure will become reliable after cross bars or, in other words, sides are attached to it, preventing the child from falling off the slide;
4. To an almost finished structure, you can screw two bars onto self-tapping screws, to which a ladder and a ramp are attached. After this, you can lay floorboards on a small slide area and fix them with self-tapping screws. It is advisable to lay floorboards at a short distance from each other. Thanks to gaps of only a few mm, the wooden floor will dry out well if it gets wet by rain or snow;
5. Then you can make the sides for the stairs. To do this, the edges of two boards must be cut down, positioning the saw at an angle of 45 degrees. These boards are attached to the racks, and then smaller boards - steps - are fixed to them;
6. The gap between steps must be calculated in advance. If the distance is too large or too small, it will be difficult for children to climb up. A comfortable step for climbing stairs is 35 cm +/- 5 cm;
7. At first, the slope is created in the same way as a staircase, but instead of boards, sheets of plywood tightly pushed together are placed on the sides. WITH reverse side they are fixed wooden slats using screws;
8. Lastly, the structure is coated with varnish or color emulsion. Wood and plywood must be treated, otherwise they will deteriorate under the influence of moisture, thereby reducing the service life of the slide.

Step-by-step instructions for creating a children's metal slide

Preparation: drawings and tools

One of the main tasks is to make a drawing of a future structure for children's games.

This slide is designed for older children

To work with metal you will need a welding machine and a pipe bender. The parts bent by it are needed to create a railing on the top platform of the slide. Although to make a simple metal slide you can do without them.

List of materials

To make a simple metal slide you will need:

1. Galvanized sheets or stainless steel;
2. Metal square profile pipes;
3. Metal round pipes;
4. Special corners.

To make a slide, you should choose metal with a thickness of 3 mm. The suitable size of square profiles is 3x50x50 mm and 2x25x50 mm.

Stages of work

• First, you need to place four metal profile pipes in holes dug in the ground. Then you need to weld a smaller pipe to their tops, which will serve as a support for the base of the platform. Following this, handrails and stiffening ribs must be welded to the structure;

Railings are an essential element of a metal slide that protects children from accidental falls. There should be no jumper posts on them.

• The next step is welding guides for the future staircase and ramp to the structure. Later, metal sheets are attached to the base of the platform and the sliding surface by welding;
• Now we need to weld short profile pipes to the ladder guides, which will become steps. The second and subsequent pipes must be welded every 17.5 cm. With such a gap, the child will be able to easily free a leg that is stuck between the steps while playing;
• All that remains is to add handrails to the stairs, covering the distance from them to the guides with sheets of metal. All existing corners must be rounded to avoid injury to the child. The protruding edges of the pipes can be “closed” with hemispherical plugs.

Video instruction

Thus, the main advantage of a wooden slide is ease of manufacture, while metal structures are durable. To create a wooden play structure, you will need to sand, saw and screw the boards. Installation of a metal slide is based on the use welding machine.

In the courtyard of a private house or in a country house, the best entertainment for a child is a children's slide. The playground with a slide is suitable for children from 2 to 7 years old and older. Implementing such a design is not difficult, knowing how to make a children's slide with your own hands, how to ensure safety and what to pay attention to during manufacture. The simplest, fastest and most inexpensive option for a summer residence is a wooden slide, the construction of which will be discussed in this article in the form step by step instructions for beginners without construction experience.

DIY children's slide

Types of children's slides

The location of the slide (in the house or on the street) will determine its dimensions and material of manufacture. From this position, two types are distinguished:

Indoor slide for a child in a house/apartment

Usually, small size, installed in the child's bedroom. Any materials (chipboard, plywood, laminate) are suitable for production, since Negative influence environment. A do-it-yourself indoor slide for children is made according to the same principle as an outdoor one, but in a more compact size.

There are such slides in the courtyard of almost every high-rise building. Residents of the private sector have to take care of their installation themselves.

Types of slides depending on the material of manufacture

There are ready-made slides on sale made from different materials (the most popular is plastic), for self-made usually wood or metal is used. Nevertheless, short review will give an idea of ​​the advantages of this or that material for the slide. The list is in order of ease of installation and duration of operation:

Inflatable slide

Made from PVC (laminated PVC fabric). Suitable for little ones.

It is easy to assemble (inflated manually or with an electric pump), compact, and has a short service life.

Plastic slide

Designed for children 3-5 years old. Plastic allows you to make slopes various shapes: pipe, spiral, wave.

A PVC slide takes up little space, is easy to clean, safe, and has a sliding surface. You can go down the slide at any time of the year; the plastic slope has a high heat capacity (it does not overheat in summer and does not cool in winter). Making a plastic slide with your own hands is quite simple - connect the parts according to the instructions.

The main disadvantage is the fragility of the plastic (inherent in cheap Chinese-made models).

Metal slide

Reliable, durable, with proper care it can be ridden by two or three generations. It is possible to make the slope (descent) of different heights and different lengths.

The disadvantage is the high thermal conductivity of the metal (it’s very cold to go down in winter, and very hot in summer). In addition, the metal slide needs maintenance, and the steel slope is susceptible to corrosion.

Wooden slide

Wood is a natural and affordable material.

The wooden slide is environmentally friendly, lightweight, comfortable, suitable for installation in any place and use in any weather.

However, wooden slides require constant protection (wood is susceptible to rotting and deformation).

A wooden children's slide for a dacha is the most popular and simplest option for making your own, due to the availability of wood, maintainability and the ability to complete the work without the involvement of specialists (welding, using a welding machine, etc.).

How to make a children's slide out of wood with your own hands

1. Design

3D projects, drawings, slide diagrams allow you to get a holistic idea of ​​the configuration and dimensions of the future structure, and will also significantly facilitate the manufacture of parts.

Development of a slide project for children (what to pay attention to):

• child's age. The baby will need a flat, low slide. So that he himself or with the help of adults can go down it. Older children will be more interested in the presence of turns or bends on the descent;

• height. Allows you to select the required height of the stairs (the taller the child, the greater the distance between the steps should be) and the steepness of the flight. In addition, determine the installation location of the handrails;

Note. For small children, it is necessary to install a flat staircase; for older ones, a vertical one is acceptable.

• slide dimensions. Dimensions are needed to calculate the width of the slope (descent) and the height of the enclosing sides;

• installation location. It is necessary to leave free space in front of the slide for a safe descent;

• the angle of inclination of the stairs and slope so that they are safe for ascent and descent;

• the wishes of the child and your own abilities.

A drawing of a simple wooden slide is shown in the figure.

2. Material for children's slide made of wood

As an example, we provide a list of lumber for a wooden slide with a slope length of 3000 mm and an upper platform size of 500x500 mm.

Material prepared for the website www.site

Advice. Under the upper platform you can make a box for storing sports equipment or toys.

The tools that will come in handy are a tape measure, a hammer, a level, a drill, a plane, a saw.

3. Preparing material for a children's slide

Please note that only well-dried wood is used in this work; this will reduce the likelihood of deformations. All lumber must be processed (planed) with an electric planer to eliminate nicks and knots. And also sand and chamfer (round) to eliminate all possible wood defects.

Bottom support pillars treat with any material that avoids rotting (waterproofing mastic, waste machine oil, resin, etc.).

4. Preparing a place under the slide for children

Level the area allocated for the hill and mark the location of the supports. In our case, this is a square of 500x500 mm. In the corners of the square, use a drill to deepen the holes 500-600 mm. Pour crushed stone-sand mixture down. The pillow will serve additional protection support posts.

Note. If you plan to develop a complex playground, more free space should be provided.

5. Installation of supports for a children's slide

Supports are installed in the prepared places (No. 1 from the table with the list of materials) and securely fixed with concrete.

To make the structure stronger, its bottom is “tied”. To do this, grooves are made in the racks (with a chisel or a router) 20 mm deep. The supports are connected to each other using a planed board (No. 5), inserted into the prepared grooves. It is better to fasten with self-tapping screws or self-tapping screws.

Note. Installation of the slide is possible without digging in; in this case, guy ropes are provided.

6. Installation of the floor (top flooring) for a children's slide

The work uses elements No. 2 and No. 6. The timber is laid out parallel to each other, and boards prepared for the floor are attached to it.

Advice. A gap of 5-7 mm should be left between the boards to allow water to drain.

7. Making a ramp (slide) for a children's slide

If there is a plastic slope, it is simply installed and secured to existing structure. When making a ramp with your own hands, elements No. 8 and No. 9 are used. The floorboards are fastened together, and enclosing sides are installed along them.

The place where the ramp is attached to the floor of the upper platform can be made in two versions:

• by forming desired angle(usually 45°) and attachment to the base;

• by sawing the grooves, as shown in the photo.

Please note that the bottom of the slope is also sawn at an angle to ensure its stability when going down the hill.

The main rule here is that the boards that make up the slope are carefully polished after the formation of the shield - this will eliminate the smallest imperfections of the boards and prevent the appearance of splinters and abrasions in the child.
After construction, the slope is painted.

What to make a ramp for a children's slide?

Summarizing the user experience, we can highlight the most popular materials for the release device:

• plastic sheet. It has better sliding characteristics, but is prone to cracking, and also makes the structure expensive;

• galvanized steel sheet with a thickness of at least 0.5 mm;

• thin plywood;

• linoleum;

• wax polish applied to wood;

• On the contrary, it is not recommended to lay laminate, because it deforms under load and under the influence of moisture.

When laid on top of a durable wooden deck, these materials make the slide for a children's slide more slippery, which means the descent will be faster.

An older child will be interested in a slide that has a spiral slope rather than a straight one. In this case, you need to take a more careful approach to the design of the gutter, and its additional coating is mandatory.

Advice. Any unevenness of the slope, sharp corners, or metal parts can cause injury, so the places where the screws are attached are sanded, and the slope is painted or varnished.

8. Making a ladder for a children's slide

A mandatory element of a children's wooden slide is a staircase consisting of at least several steps.

Structurally, the staircase can be made on a bowstring or on a stringer. An example is shown in the diagram.

Note. Round steps can be made from available materials, for example, from cuttings gardening tools(shovel).

9. Fencing the stairs and the floor above the landing

Guardrails for the stairs and upper landing depend on the height of the slide, the age of the child and other factors.

Despite its apparent simplicity, a wooden children's slide requires compliance with certain rules during construction:

• flexible plywood can be used to make a rotary ramp;

• each element of the ladder must be securely fastened;

• It is advisable to paint the finished wooden slide not with ordinary oil paint, but with acrylic paint, or even better with high-quality varnish. In any case, the most exploited surface is the slope. The decorative coating is applied in several layers with mandatory drying of each layer;

• Over time, the coating on the ramp will wear off and will therefore require maintenance. Users advise that each time before painting, sand the surface, eliminate possible deformations of the board, fill the cracks with putty, and only then cover with a new layer of paint.

Safety when using children's slides

• the slope should rest against the mat (or sand mound) - this will ensure a soft landing;

• A wooden slide needs periodic inspection for cracked joints or deformed boards. Especially relevant after winter;

• It is better to install a wooden slide in the shade, in a place that is clearly visible from the window;

• There should be no thorny bushes, poisonous plants (datura, foxglove) or allergenic plants near the installation site. Honey-bearing flowers are also not the best neighbors - they will attract bees;

• there should be enough space for several children to be near the slide;

• electrical cables, pipes, hoses should also be located away from the slide.

Conclusion

A short guide will help you make a wooden slide with your own hands. In the future, it can be supplemented with other elements of the play complex: swings, sandbox, sports equipment.

To entertain and keep the kids occupied personal plot, while parents are busy with their “adult” affairs, you can install a swing, a sandbox and a slide. Wooden slide design for home or a dacha is quite simple and does not require expensive materials. Today we'll talk about how to make a slide for children with your own hands.

DIY slide for children: drawing

To calculate the quantity required material First of all, prepare a design diagram of the structure. You can draw the layout yourself or take a ready-made drawing from any source as a basis, adjusting the dimensions to your requirements.

When independently developing a layout take into account the following nuances:

• child's age: for children from 1.5 to 4 years old, the height of the slide should be no more than 1.5 m; from 4 to 11 years - from 2 to 4 m;
• the optimal length of the slide can be calculated using the formula: “height of the slide x 2”;
• The angle of inclination of the slide should be within 40-55 degrees;
• the height of steps and handrails is calculated depending on the height of children;
• It is necessary to provide protective sides, the height of which at the launch site should be at least 60 cm, and at the descent - about 20 cm.

How to draw it yourself diagram? You can create your own drawing based on these photo:

Do-it-yourself wooden slide for children: manufacturing stages

Preparatory stage

First of all, based on the drawing, it is purchased required amount main material - boards, bars; auxiliary materials - self-tapping screws, wood varnish, paint. It is also necessary to prepare tools - a saw, a hammer, a screwdriver, a drill, a tape measure, a level, a plane.

IMPORTANT! Special attention it is necessary to pay attention to the wood - it must be dry, without visible defects. It is preferable to use wood coniferous trees. It is advisable to use self-tapping screws, bolts, and screws as fasteners, as nails may come out during operation and cause injury. .

Preparation of materials

• First thing, sawing all wood parts, according to the drawing.
• Then everything wooden parts must be freed from knots and nicks and sand thoroughly to remove all defects.
• To avoid rotting, the bottom of the support pillars is processed resin, mastic for waterproofing, shale or anthracene oil, oily antiseptic.

Site and foundation preparation

The place where the slide will be installed must be carefully leveled, and the positions of the support pillars must be marked with a tape measure.

If you decide to install a slide not at home, but at your summer cottage, follow the following instructions. With help garden borer dig holes about 60 cm deep, which will make the entire structure more resistant to weather conditions - freezing of the soil during severe frosts and soaking it during periods of rain.

In the resulting wells insert the pillars, leveling them using a level and filling them with concrete.

IMPORTANT! Z the descent path should be soft enough - covered with sand, or artificial grass, a rubber mat, in order to avoid injuries when completing the descent.

Assembling a wooden structure

• in installed supports cut grooves. Their width should correspond to the width of the board that will make up the frame, and their depth should be about 2-3 cm;
• a board is inserted into the grooves and the stand is tightened using self-tapping screws;
• at the upper ends of the support pillars, transverse bars are screwed on both sides, which will serve as the railings of the launch pad;
• two bars are screwed to the supports, to which the stairs and descent will be attached;
• on top of these bars the floor of the launch pad is laid. Small gaps (2-3 mm) should be left between the boards to ensure the flow of rainwater and melted snow;
• ladder being installed: the edges of two boards are cut at an angle of 45 degrees, they are screwed to the cross beam of the launch platform. These boards are fixed to each other using steps. The optimal step between steps is 25-35 cm. Next, balusters are installed to which the railings are attached;
• descent is being installed: the edges of two boards are cut at an angle of 45 degrees, they are screwed to the transverse beam of the landing platform opposite the stairs. These boards are fixed to each other using several cross beams secured with self-tapping screws. Plywood or long boards are laid on top of the cross beams, which will serve as the descent.

Final stage

After assembling the slide, you must carefully inspect all fasteners and check that all the caps are recessed into the wood.