Do-it-yourself lugs from car rims. Making lugs for a walk-behind tractor with your own hands. Purpose and types of lugs

With the help of a walk-behind tractor, you can do a lot of different work if, in addition to the unit, there is an appropriate attachments. the main task any walk-behind tractor is tillage: plowing, hilling, possibly planting and digging potatoes with a certain canopy. Plowing requires cultivator lugs. These are reliable helpers for every owner of the unit, and you can make lugs for a walk-behind tractor with your own hands within a few hours. Grousers are a fairly common attachment that allows you to increase the mass of equipment and ensure better grip of the walk-behind tractor with the soil.

general information

Self-made hooks

For "Neva"

The walk-behind tractor of each brand has mounted options that are more suitable for its design than others. It is better, of course, to purchase a universal walk-behind tractor, for which almost all canopies are suitable. For the "Neva" wheels with lugs Ø 340 × 110 are produced.

By design, these lugs are slightly larger than the self-made ones described by us. Need to follow the instructions above, but select other rim sizes. The wheel height for the Neva hook should be 340 mm, width homemade device- 110 mm.

For "Centaur"

Grousers for a walk-behind tractor of this brand differ only in size. Above, the dimensions that had to be guided by were described, converting the old wheels into lugs for the Neva. The same scheme is used for the manufacture of wheels with hooks. large sizes. Wheel height is selected 450 mm. The width of the wheel should be 110 mm, as for the Neva. Such hooks are suitable for the Centaur 2060 and 2090 walk-behind tractor and units with similar parameters. The factory version will cost about $30.

For "Zubr"

The walk-behind tractor of this brand is a heavy professional equipment, and it can be fitted with the best attachment available. In order for the Zubr to go into the ground perfectly, lugs are needed for it. The standard fixtures that fit it have a 200mm bar and a 700mm height. Wheels of this width are worn only on heavy walk-behind tractors and, in addition to the Zubr JRQ78 and 79, they also fit the Centaur 1070D, Aurora 101 and Aurora 81, Zirka LX1080D and 1090. In the factory version, the distance between the hooks is 14.5 see. The wheel hub has a diameter of 60 mm. They are put on the walk-behind tractor with the help of an additional hub.

Description and dimensions of hooks

Heavy walk-behind tractors are most suitable for working on heavy soils and, accordingly, hooks with a larger width and height are more suitable for traction of the unit with virgin soil or very neglected soil. For work of high complexity, weights are attached to the wheels.

The dimensions of the hooks vary between 310-700mm in height and 100-200mm in width. The Salyut walk-behind tractor is suitable for 500 × 100 mm and 500 × 200 mm lugs. The latter are functional together with the plow. The same size can be bought with a sand-filled weight, so that the mounted plow plows the soil deeper. If there are hooks 500 × 200, the weighting agent can be made by yourself. Wheels with hooks measuring 700 × 130 mm are put on a walk-behind tractor to work with hillers, flat cutters and a potato digger.

Grousers for "Zubr"

In addition to those described above, 700 × 100 mm hooks are freely suitable for the heavy Zubr JRQ78 and 79 walk-behind tractor. Their width is smaller, and, in addition to heavy ones, they can be used with medium-weight walk-behind tractors.

The hooks for the Zubr will fit the Neva. This size is in high demand., just due to better compatibility. Wheels 700 × 200 can only be put on heavy units, and they are intended for processing virgin soil. Wheels 700x100 are suitable for the average needs of the farmer, they can be safely stored and fixed on another walk-behind tractor when the existing one becomes obsolete, even on a weaker one in power. Grousers 700×100 will cost about $70.

The simplest holds

For manufacturing you need the following:

Steel sheet 4-5 mm thick for wheel disks.
Steel sheet 6-8mm thick for hooks.
Welding machine.
Bulgarian.
Drilling machine or powerful drill.

Two identical discs are cut from a thinner sheet. A hole is made in the center for the hub and mounting on the wheel studs. Sawtooth protrusions 10 cm deep are cut along the outer edge. Triangular hooks with cut corners are cut out of a thick sheet. They are welded strictly perpendicular to the sawtooth cuts.

Despite the homemade hooks, made in this way, have a serious advantage - they are heavy enough to provide a strong grip even on a muddy or loose surface. There can be no talk of moving along the primer, such wheels are intended only for work in the field.

Another economical option - production from a steel circle Ø15mm. A handwheel from a valve on the main gas pipeline can be used if there is a pair. The hooks are welded onto the outer rim, the hub is attached in the center.

For the following design, you will need car rims. Such a manufacturing option for homemade walk-behind tractor is optimal. The design provides for standard wheel hubs from the car, and the whole set of four is purchased rims. Tires are installed on one pair, and the second is needed for heavy soil.

A steel corner of 50–60 mm is taken, cut into pieces that are slightly wider than the disks. In the middle of one side, a triangular sector of 60 ° is cut out with a grinder.

The corner is heated by a gas burner and bent along the cutout. The docking point can be grabbed a little by welding to provide additional rigidity. The resulting blanks are welded to the outer side of the disk, an equal distance is maintained.

The assembly is repeated on the second disk, do not forget about the same distance between the corners. Now you can quickly change rubber wheels to steel hooks, and there will be no problems with the seat, because the wheels are the same.

The rim structure can be simplified. To do this, the horizontal part (rim) is cut off, and steel plates are welded on. This option suitable for frequent wheel changes on the same type of hub. Disks are selected appropriate.

Homemade hooks of complex design

Easy-to-make lugs have characteristics that are far from perfect. Let's imagine a design which is not inferior to the quality of factory products.

We will need:

Steel sheet 4-5 mm for the central disc.
Steel strip 50 mm wide and 4-5 mm thick for the outer support surface. There will be six such hoops. The outer rings make the wheel stronger and heavier.
Steel plate for hooks 8-10mm thick.
Arc welding machine, drill or drilling machine, Bulgarian.

Connections are made by electric welding, as gas-burner metal of this thickness will not warm up.

Since the diameter and width of the hooks are larger seat for regular wheels - the axles are lengthened.

It is possible to adjust the track, which depends on the width of the rows in the field. By moving the wheels with hooks, you can set any width and position of the attachment. Each wheel weighs at least 10 kg, which means that it provides a strong grip on the ground.

Such wheels are not devices for loosening or plowing, although some tillage is present. They cannot be used as a loosening cutter, since an independent fulcrum is needed. If it is not required to weight the hooks, the design can be made lighter and more delicate. These wheels perform well on "light", pre-loosened soils. Small diameter discs, the rim rests on openwork design with spokes made of profiled steel sheet. For hooks, the thickness of the steel should be no more than 8 mm. Each wheel is not heavier than 7 kg.

Combined design

If the technique is homemade, and the soil is not too difficult, the wheels should be appropriate. You can make holds using tractor protectors.

We take halves of rims from the Zhiguli car . Choosing tires with good tread from a tractor. We cut off the sidewalls, we get a rubber closed ring with a good tread. We open the halves from the rims and, after laying the tires, firmly twist them. With such lugs, it will be possible to move along a dirt rolled road without fear of loosening it. On the soft soil of a plowed field, the wheels will not fail, however, the traction force will be less than in the case of the metal version.

If it is necessary that not only the wheels are tenacious, but also additionally loosen the soil in the rut, knife-type hooks are made. You can create a homemade rim to attach them or weld them to rims. The only drawback of the knife design is that it does not allow you to move the walk-behind tractor in the usual way.

During spring loosening, together with traditional nozzles, the width of the soil processed per pass will double, which will save a lot of time.

In modern life, various devices are used that are designed to significantly reduce physical exertion when performing certain work. Appropriate special equipment is used for agriculture and horticulture, which increases productivity. On practice, Special attention given to small and multifunctional devices.

One of these devices is a walk-behind tractor. Of course, the device itself does not have a certain value without additional attachments. However, due to the high cost, lugs on a walk-behind tractor and other devices can be made independently. In this case, it is necessary to consider how exactly home-made lugs are made for a device such as a Mole walk-behind tractor or other models.

Save time and effort with grouser for walk-behind tractor

How to choose lugs for a walk-behind tractor

Before considering how to make lugs for a walk-behind tractor with your own hands from car rims, you need to consider the procedure for choosing these devices, and also the main purpose. Why do we need the appropriate lugs for a walk-behind tractor? These devices allow you to cultivate arable land before planting, carry out hilling, and also plow the soil after harvesting. When choosing these devices, the following parameters should be taken into account:

First of all, the choice of lugs for a specific walk-behind tractor should be based on the available budget.
It is necessary to take into account the dimensions of the motor cultivator, as well as attachments (length, height and width, and also diameter).
Devices should be selected based on the purpose and functions of the use of the corresponding walk-behind tractor and structural elements.
It is also important to take into account the type of soil that is subjected to appropriate processing with a cultivator.
This takes into account the availability of a technical equipment option (mounted, devices on a rigid hitch or auxiliary device).
Consideration should also be given to the area land plot, and in addition the power of the cultivator used for processing.
Separately, the cost is taken into account, as well as the manufacturer and compatibility of technical equipment.

In this video, we will consider lugs for a walk-behind tractor:

Considering all these parameters, you can make a rational choice suitable option buy or try independent production devices from disks, using certain diagrams and drawings that are freely available on the Internet for download. Additionally, if necessary, all design developments can be done independently, if there are certain skills, knowledge and some desire.

Important. When purchasing attachments, it is recommended to take into account that mainly the lineup is made for each cultivator in a separate order.

Most Effective

When choosing the appropriate fixtures, most often, the models that have the highest efficiency are taken into account. In practice, this is inherent only for specific types of attachments. Let us consider in more detail what types of appropriate equipment should be chosen for the full processing of arable land:

here, most often, multi-component milling devices are used, which allow processing the soil in different directions;
you can give preference to a plow with a harrow, since this equipment can simultaneously plow, loosen and cultivate the soil;
additionally should be highlighted homemade devices, as they allow you to apply everything you need in one mechanism;
collapsible multifunctional component cutters and plows with harrows are also in demand.

In each individual case, there are some nuances with the appropriate selection of structural elements, however, an integral part of any type are special weighting agents that serve to weight the structure when immersed in the ground. This equipment allows you to evenly plow the soil to the same depth. Especially such an arrangement is necessary for high cultivators, where the hitch is located significantly above the working plane.

How to weight grousers

As mentioned earlier, for uniform tillage with special attachments, appropriate weighting agents are used, which allows the mechanism used to remain in the process of movement on required depth. In this case, it is necessary to consider in more detail how to make the applied canopies heavier, namely:

for purchased equipment, special auxiliary weights can be used, which are hung together;
if necessary, you can use hanging any heavy object for uniform plowing;
in this case, it is possible to independently create a fairly heavy device that will loosen the soil evenly;
often on manufactured versions, an appropriate center of gravity is specially provided, which is achieved by the presence of a certain design;
weighting can be an additional adjustable insert that is present on attachments.

There are a lot of options for increasing the mass of this device, here it is only necessary to rationally use such weighting so that during operation the device does not fall deep enough into the ground. Otherwise, there may be damage to the hitch mechanism, or deformation of the tillage mechanism itself.

Important. When working with such equipment, weather conditions should be taken into account, as well as the humidity and softness of the cultivated soil surface.
Do-it-yourself lugs for a walk-behind tractor
In modern practice, there is no need to purchase such versions of structural elements, since there is an opportunity to do everything you need yourself. As a rule, this will require certain materials, as well as some auxiliary tool for the manufacture of appropriate mechanisms. In this case, the procedure for the manufacture of special home-made lugs is as follows:
First of all, you will need to find the appropriate execution scheme, or make it yourself, taking into account available option assemblies.
The next step is to prepare everything you need to complete the arrangement of attachments on a motor cultivator.
Next, it is necessary to correctly calculate all the dimensions of the home-made lug on the cultivator to be carried out.
In addition, it is necessary to decide on the option of hitching a home-made device and mechanized equipment.

Make your own grouser
Subsequently, according to the prepared scheme, the necessary product for plowing the soil is manufactured.
Here, a holding frame is separately produced, and in addition, the device itself for cultivating the soil on the land.
Subsequently, the manufacture of an appropriate mechanism for making a hitch with the mount present on the walk-behind tractor is carried out.
Next, a full-fledged assembly of the entire mechanism is carried out from previously made individual structural elements and fixtures.
Separately, weighting is carried out here, which can be done with the addition of loads determined by weight.
Also, if necessary, you can use a specialized frame, which will have the necessary weight and a shifting center of gravity.
After the structure is assembled, it will be necessary to carry out its initial engagement with a mechanized cultivator.
Additionally, a test run of the produced equipment is carried out, while, if necessary, adjustments are made.

In the production of such technical equipment, the main thing in the work is the search or development of a scheme for a future version of the lug. Having the necessary drawing at your disposal will significantly reduce time costs, since the diagram contains visual drawing devices, and in addition, all the necessary dimensions are indicated.
It should be understood that in each individual case, the dimensions of the structure are calculated based on the power of the installation, its size, and, in addition, the clutch option. In other words, it is not recommended to install a large lug on a walk-behind tractor with a low weight and a weak motor, since such equipment can quickly disable the main mechanism due to excessive load.
Important. In practice, for self-fulfillment Such tillage equipment can be used with any strong metal object, including car rims, whose service life has already ended.

From car rims
At present, the arrangement of attachments from these elements is quite widespread. Such popularity is due to the following characteristic points:
All car rims have the necessary structural rigidity, as well as the appropriate size and weight.
Such devices are easy to find (often old devices are stored in the garages of almost all car owners).
These variants of structural elements are quite easy to process, as they were originally made with an eye to possible repairs.
The mechanisms already have cuts and other openings necessary for fastening on their central plane.
This type of device is characterized by a long service life with correct processing surfaces.

Only advantages can be found in the use of disks from car wheels, since it is easiest to make milling lugs for attachments from them, which will subsequently be mounted on a walk-behind tractor. Here, when working, you only need to make the necessary cuts with a grinder, and then hang the devices on a special frame, which is to be coupled with a walk-behind tractor. The frame itself is made heavy enough to make the structure heavier.
Important. After carrying out work on the execution of milling cutters from disks, it remains only to sharpen them correctly, so that later, when processing arable land, additional weighting is not required.

Lugs for a walk-behind tractor are useful gadgets, allowing to clear the area for sowing from weeds and, at the same time, to increase the stability of the agricultural machine on loose soil. Today these simple products have earned great popularity not only among the owners of large farms, but also among summer residents who have small plots of land at their disposal.

Why do you need lugs for a walk-behind tractor?

Grousers on a walk-behind tractor are one of the most versatile types of devices for a household unit. When paired with an agricultural machine, the products perform a number of the following tasks:

Increase the weight of the walk-behind tractor, allowing more efficient use of various attachments;
Additionally cultivate the soil, eradicating wild shrubs;
Improve the grip of the walk-behind tractor with loose soil when moving up.

The versatility of lugs makes them an indispensable attribute, both in large and small farms. Their installation and use will not require special skills, thanks to which even a beginner can effectively use the lugs for a walk-behind tractor.

Not only the effectiveness of their use, but also the ease of movement of the walk-behind tractor depends on how correctly the lugs are selected. When buying devices, you should pay attention to such factors:

The dimensions of the lugs - the suitable dimensions of the products directly depend on the class of the agricultural machine. For heavy walk-behind tractors, choose products with a diameter of about 70 cm. Medium and light units can be equipped with lugs with a diameter of about 25–40 cm;
The type of soil to be cultivated - the most versatile are the lugs to which arrow-shaped spikes are welded. Their coupling part is in the form of corners, thanks to which they show excellent coupling even with very loose soil;
The possibility of mounting weights - for operation on loose soil, some manufacturers of lugs provide for the possibility of mounting additional weights that make the use of products more efficient, especially when working with light walk-behind tractors. As a rule, weighting agents have the form of durable metal containers that can be filled with stones, sand or any other material at hand, and then installed on the lugs.

When buying lugs, be sure to consider each of these factors. This will make it much easier for you to choose the most efficient fixtures for mounting on a walk-behind tractor.

Given the high cost of some models of lugs, many owners of walk-behind tractors prefer to make accessories for agricultural machines with their own hands. There is nothing strange in this, because homemade designs in terms of quality, efficiency and durability, they are practically no different from the lugs available for sale on store shelves.

Before making do-it-yourself lugs on a walk-behind tractor, we advise you to carefully study the drawings. They will give an idea of how to arrange and fasten parts in a structure.

by the most in a simple way will be the manufacture of lugs from car wheels from cars of the domestic brand VAZ. The order of work, in this case, will be as follows:

First you need to weld one metal plate to the outer surface of the Zhiguli disks;
Next, start making teeth. To do this, take the steel of the desired thickness and cut blanks of suitable sizes. The length of the teeth varies depending on the class of the walk-behind tractor - for heavy units, teeth are suitable, about 15 cm long, for medium ones - 10, and for light ones - about 5 cm;
Weld the teeth made along the circumference of the rim, keeping a distance of 15 cm between them;
The video will tell you more about the manufacture of lugs for a walk-behind tractor.

The simplest iron wheels for a walk-behind tractor made in this way will help you quickly remove large weeds and make your walk-behind tractor much more passable in conditions of loose and wet soil.

Making grousers from a gas cylinder

Simple metal wheels for a walk-behind tractor, you can do it in another way. An empty gas cylinder is suitable for this. In this case, you will need:

Make sure there is no gas in the cylinder;
Place the cylinder motionless on the floor or on stands;
Cut out 2 identical disks from it, about 30 cm high and about 6–10 cm thick - they will play the role of rims;
Weld one metal plate to the disks;
Weld 6 teeth, 15 cm long, to each of the plates. For use on walk-behind tractors light class teeth must be welded to the plate, 5–10 cm long.

For work, we recommend using only cast-iron cylinders. Cast iron is much stronger and heavier than steel, so lugs made from this material can last quite a while. a large number of time.

Making lugs with a more complex design

In addition to methods that allow you to make the simplest lugs, there are also ways to make more complex designs. To work on the manufacture of the latter, you need to prepare:

Steel sheet, 3 to 5 mm thick - you need to make a central disk from it;
Steel strip, 5 mm thick and 50 mm wide - it will be required for the manufacture of the outer hoop. You will need 6 hoops - they will make the wheel heavier and more durable;
Another plate of steel, 8 to 10 mm thick - you need to make a hook from it;
Bulgarian;
Drilling machine or drill;
Welding machine.

Connect all parts to each other by means of arc welding, since the gas burner will not be able to heat the metal of this thickness. The manufacturing algorithm is as follows:

First, lengthen the axles of the walk-behind tractor - this is required due to the fact that the width and diameter of the lugs are larger than the place where the standard wheels are mounted;
Be sure to provide for the possibility of adjusting the position of the track, since in the future you will be processing a garden with rows of different widths. When moving grouser wheels, you will be able to adjust the position of the attachment used and the width at which the lugs will be located. Since the mass of each wheel is about 10 kg, reliable grip and high stability of the walk-behind tractor on the ground will be ensured;
Next, proceed to the manufacture of the most lugs. To do this, make 2 spoke-shaped central disks from a profiled steel sheet;
After that, weld 3 outer hoops and hooks to the end parts of the structures;
Weld steel plates to the hoops. They should be located on the hoops diagonally in the form of a snake;
Sharpen each of the plates for better grip on the ground.

Made lugs will provide maximum traction with the ground and help you easily remove even the thickest weeds.

When operating lugs, in no case do not forget that they are intended only for working in the garden. Do not use devices for moving the walk-behind tractor on concrete or asphalt, as the teeth of the product will bend and quickly become unusable.

Both simple and more complex structures, suitable for use on motoblocks Salyut, Agat, as well as Neva MB-1 and MB-2.

Each owner of a walk-behind tractor tries to do everything possible to ensure that his tool is as functional as possible. You can make do-it-yourself lugs for a walk-behind tractor from car rims or buy them in a specialized store.

Drawings of how to make do-it-yourself lugs for a walk-behind tractor

Grouser refers to attachments and is widely used in agriculture. It is necessary to take into account the design of the lug, since they are made universal, and some are also made for individual models of walk-behind tractors. Any owner of a walk-behind tractor can make his own lugs from car disks he does not need. Naturally, this lesson will take time, but you can save some money.

Drawings and diagrams of lugs for a walk-behind tractor

Do-it-yourself grouser drawing

Do-it-yourself attachments for a walk-behind tractor from car rims

Before you start working on the manufacture of a lug, you need to acquire drawings, the orientation of which will be directed to the work process. The simplest and most common manufacturing method is the use of car rims for it.

Drawing how to make a grouser

Step-by-step instructions for making lugs from discs:

Step 1. By using welding machine a metal strip is attached to the disks, which will later serve as a fastener for the lugs plates.

Photo of lugs from discs

Step 2 Making teeth based on steel plates. The thickness of the plate must be large enough if the attachment is designed to work with the ground. The length of the teeth must be selected, starting from the model of the walk-behind tractor.

Photo how to make attachments from car tires

Step 3 The teeth are attached in a circle, the distance between them should be 16 cm, tolerance in different directions should not exceed two centimeters.

Photo of lugs on wheels

When putting into operation your lugs, it is worth remembering about its direct purpose, that is, its contact exclusively with the ground. It is strictly forbidden to operate the equipment on hard surfaces such as stone or asphalt.

Photo of a grouser from a sheet of metal

Do-it-yourself lugs for a walk-behind tractor from car rims even a novice farmer or gardener can do it. Find detailed drawings and try to make attachments from scrap materials yourself. Quality equipment is the first step to successful farming from scratch.

A person living in an agricultural area or simply owning a summer house should keep such a device as a walk-behind tractor on the farm. Such special equipment will greatly facilitate the process of plowing and hilling the land, and can also be useful when planting and digging potatoes and other agricultural work. But for any type of work, trailer canopies are needed. You can buy equipment at mall, but you can make lugs for a walk-behind tractor with your own hands.

Grousers are designed to facilitate the plowing of the earth. They look like large, steel wheels with angled spikes, with which they cling tightly to the ground. To make lugs for a walk-behind tractor with my own hands, required suitable material and appliances. A pair of disks, a grinder and an electric welding machine are not as difficult to find as giving a decent amount for store fixtures.

Grousers for a walk-behind tractor made of car rims

The simplest answer to the question of how to make lugs on a walk-behind tractor is to use old car rims. In addition, you can use not only car wheels, but also any others: tractor, motorcycle or from under an old walk-behind tractor. Before proceeding to work, it is necessary to carefully study the diagrams and drawings. Examples ready-made solutions for the production of home-made lugs for a walk-behind tractor from car rims are shown below.

To make good soil hooks, you must follow these instructions:

Attach iron strips to the disks, which will be used to strengthen the spikes. In the manufacture of the lugs, it is recommended to screw the plates under the spikes to the disk with bolts.
Craft spikes from 2 iron plates. The spikes should look like 100-120 degree corners. Since they are designed to work with soil, the width must be made quite large.

The length of the teeth can vary significantly, it all depends on the model or modification of the walk-behind tractor.

Screw the spikes onto the iron strips. The gap between each tooth should be from 14 to 18 cm.

For better work you can increase the spikes, for which an additional tooth should be attached to all the hooks. In general, to make such equipment, it is not necessary to use disks - almost any rounded steel object will fit for this. For example, you can cut a pair of iron rims from a gas cylinder and weld corners to them.

If everything is done according to the instructions, then an excellent lure for a walk-behind tractor will come out, which will delight with work for many years. The main thing is not to forget about the correct operation. A minitractor with such hooks must be used exclusively on the soil. This applies not only to do-it-yourself equipment, but also for shop lugs.

If you use them on asphalt or stones, you can ruin the lugs themselves, the surface and, most importantly, put yourself in danger.

Dimensions of lugs for walk-behind tractors

The heavier the technique, the better and more practical it is. In high-class, heavy equipment, it is allowed to work even on hard ground, with which a light minitractor copes with considerable difficulty. require the same not small lugs. In general, the scale of the lugs depends on the size of the walk-behind tractor. The height of the equipment can be from 310 to 700 mm, and the width from 100 up to 200 mm. Grouser dimensions must be selected based on the modification of the unit. The scales of certain models are shown below.

Neva

You need to purchase walk-behind tractors that can adapt to each attachment, or, more simply, universal. However, what to do when the farm already has a Neva mini tractor, which is by no means considered universal. The wheels of this apparatus for working with soil have scales from 340-360 to 90-110 mm, and on the Neva MB 480-500 x 190-200. In the production of a homemade hook for the Neva, you need to take into account that the height should be 340-360 mm, and the width 90-110.

Firework

In this case, you can assemble the lug according to the same scheme as the Neva. The size of the wheels Ugra MB or Salyut is from 480-500 to 190-200 mm. Thus, the lug must be made 48-50 cm long and 19-20 cm wide, the same dimensions are made on the Oka of the MB series.

Centaur

The wheels in the Centaur are similar to those in the Neva walk-behind tractors. Their difference is that the Centaur's wheel length is eleven cm longer than on the Neva. In the production of a lug, it is necessary to make it 450 mm long and 110 wide, the same dimensions for the Zirka, Vityaz, Aurora, Bulat models. Such a hook will fit the Centaur 2060 and 2090, and in addition to various units with similar dimensions. In a shopping center, the cost of similar lugs is 2000-2500 rubles.

MTZ

Despite the fact that MTZ walk-behind tractors are of Belarusian production, the cost of such units is quite considerable. The approximate price of a lug for MTZ is from 4000 to 5000 rubles. The fact is that the wheels of these walk-behind tractors are quite large, their size is 540-600x130-170 mm. To make a lug for the MTZ walk-behind tractor with your own hands, you must follow the instructions described earlier and make the values \u200b\u200bcorresponding to these wheels, that is, 540-600x130-170. The same dimensions are used for Agro models.

Cayman Vario

The French company Cayman produces excellent walk-behind tractors, the price of which can exceed 60-70 thousand rubles. Also, additional equipment on them has by no means a low cost. The price of a lug for Cayman Vario is from 5 to 7 thousand rubles. Their size is 460x160 mm, there are also elongated 600x130 millimeters. The same dimensions are used on the Caiman Elite, Compact, Eco, Promo, Primo, Q Junior series. You can also make a lug yourself, although a person who allows himself to buy such a walk-behind tractor will be able to purchase any equipment for him from the store.

Oka

Motoblocks Oka - domestic production, a fairly common product in the territory Russian Federation. Farmers and amateurs are increasingly trying to make additional equipment for such units. When making a lug on the Oka, the length must be 450 and the width 130 millimeters. The manufacturing scheme is the same as with other walk-behind tractors - everything is extremely simple. In the store, the price of such equipment is about 2500 rubles. But why spend money when you can do everything at home.

bison

The Bison is a massive, impeccable mini-tractor that handles numerous tasks on the farm. It comes with the very best suspended special equipment. The size of its wheels is 700x200 mm, the dimensions of the lug are similar. In addition, certain modifications of the bison accept 700x100 mm lugs. For this reason, it is possible to make lugs of each of these values. However, it is recommended to produce 700x100, as this is more suitable for the purpose of domestic needs. Dimensions 700x200 mm are mainly suitable for the purpose of working on virgin lands. The cost of the Zubr lugs in shopping centers ranges from 20 to 50 thousand rubles.

Cascade

Another domestic manufacturer of special equipment. Motoblocks of this company are also very famous. For this reason, it will be useful for many to find out what diameter the lug should be for such a device. Height - 460-680 mm, width - one hundred and ninety-five millimeters.

Do-it-yourself lug extensions for a walk-behind tractor

Extensions are used to increase the width of the potassium, as well as the ability to freely rotate the wheel relative to the axis. In order to make this kind of extension in a walk-behind tractor, it is necessary to screw a sleeve with a slot onto the axle. An axle is inserted into the sleeve, which is fixed with a bolt. Well, the final thing is to fix the wheel with a grouser on the axle. This mechanism is very simple and anyone who has at least something to do with technology will be able to make it. In a shopping center, such an extension cable costs from 800 to 1000 rubles.