Do-it-yourself installation installation. Facing and installation of the bowl. Video - Installation and installation of a wall-hung toilet bowl on a GEBERIT installation

Installations are used to securely fix plumbing units and connect them to water supply and sewerage systems. Such designs allow you to hide all communications and thereby improve the appearance of a bathroom or bathroom. How to install the toilet installation with your own hands and will be described in this article.

Preparing for installation

Before proceeding with the installation of the installation, it is necessary to prepare the place. Such structures are attached to the wall, but the choice of location is highly dependent on the type of installation. There are two types:

block;
framework.

The first option should be mounted in a niche in the wall. This design is a plastic tank, fittings and fixtures for the toilet. The latter should only be of the suspended type.

If you bought a frame installation (which costs more), then the choice of installation location and toilet is at your discretion. Such structures are a frame that is attached to a wall, to two walls, a partition or a floor. A toilet bowl and all communications are attached to the frame.

If you have decided on a place, then it is worth preparing the right tools and fixtures:

perforator or electric drill, drills that match in diameter with the installation fasteners;
wrenches for fastening bolts;
building level, ruler, pencil;
the installation itself and the toilet.

Now you can get to work.

Installation order

How to install an installation will depend on its type. In the beginning, we will analyze the stages of installation of the frame structure. To install it, you must sequentially perform the following work:

We make markings for installing the frame. Everything will depend on the place of installation. As a rule, the frame is fastened with two fasteners to the floor and additionally to a wall or partition. When marking, use a level and a plumb line so that the installation is level.
At the marked points, we make holes with a puncher or an electric drill. Dowels are placed in them, and the frame is fixed. You can use anchor bolts, so the structure will be fixed more securely.
The next step is to connect the water supply to the tank. Everything will depend on the device of the latter. Tanks are available with side and bottom entry. When connecting, use a flexible metal hose.
Now the installation is connected to the sewer. To do this, you can use a pipe or corrugation. As a rule, the drain diameter is 110 mm. Now you can temporarily connect the toilet and check the tightness of all connections. The smoothness of the shutter button is also checked.
Now you should sheathe the installation. For this you can use various materials. For example, the combination of drywall and ceramic tiles. When carrying out these works, it is necessary to first fix the profile along the installation perimeter. Drywall will be mounted on it. Then the tiles are laid (how to lay tiles on drywall can be found by watching the video below). When performing these works, do not forget about the hole for the drain button. This place is protected by a special cuff, which will not allow construction debris to penetrate inside.

After that, the toilet is mounted, and everything is ready for use. Modern frame installations are universal. You can easily connect a toilet bowl of any design to them. During installation, special studs and bolts are used.
Installing a block installation is slightly different. First of all, as in the case of the frame structure, we make markings for the tank. Here you need to follow the instructions for the installation itself. The tank itself, as a rule, is installed at a height of a meter from the toilet. The number and location of attachment points will depend on the model chosen.
After marking, we make holes with a puncher. Using a drill can make work difficult, because such structures are attached to a wall (usually a carrier). Make holes with a drill without an impact mechanism in brickwork or concrete is quite difficult.
The next step is to install the tank and connect it to the water supply. It is also necessary to mount special pins for fastening wall hung toilet. They are screwed into pre-prepared holes in the wall.
After that, you can install the toilet and check the tightness of the connections. The last step there will be a niche filling. To do this, you can use drywall or other suitable material.

The principle of installation is shown on the example of the following photos:

When choosing a tank, choose a design with a water saving system. In this case, a drain button with two keys is used. In this case, when you press one button, the water drains completely, on the other - only half of the tank.

When closing the installation with tiles, start work from the drain button. It should be located either at the junction or in the center of the tile.

When finishing, provide a technological hatch under the buttons. So you get the opportunity to repair the drain systems and the tank itself.

Suspended or wall models toilet bowls are gaining more and more popularity, especially often they are preferred by residents of new buildings.

When re-equipping old bathrooms, this type of this plumbing fixture is also often chosen. Which is not surprising - after all, the choice, in addition to aesthetic preferences, is due to purely practical considerations.

Firstly, bathrooms are regularly cleaned, wet cleaning. Therefore, objects standing on the floor are often insurmountable obstacles for a vacuum cleaner or mop. As a result - the remains of dirt in the corners, and especially around the base of the toilet.

Secondly, wall-hung toilets with installation save usable space in a small toilet room, since the pipes and cistern are hidden in the wall.

What is the best wall-hung toilet with installation for your home? First of all, let's take a look at the material from which the toilet bowls are made. The vast majority of them made of faience or porcelain glazed to ensure moisture resistance. There are also metal models, but they are not very common.

There are even items for sale. from natural and artificial stone, wood, plastic. But such models are not in wide demand, but are rather made to order.

According to the shape of the bowl, this type of sanitary equipment is divided into:

funnel-shaped- This is the most common bowl shape. At the same time, waste immediately enters a special hole, from which it is then removed, but the disadvantage of this design is that water can splash heavily during flushing.
Poppet- are characterized by the presence of a special shelf, on which waste products first fall. The advantage of such a device is that less splashes are formed during use.
With visor cup- they are the most convenient to use, since with this design almost no splashes are formed.

As far as sizes are concerned, standard wall-mounted toilets have the following parameters:

length- from 50 to 60 cm;
bowl height- from 30 to 40 cm;
width- also from 30 to 40 cm.

However designer models may vary in size- aesthetics come to the fore here, and not convenience with compactness. So for typical bathrooms, they are unlikely to fit. See more about the sizes of toilet bowls and their calculation.

The above parameters should be considered when buying. Before you choose your favorite hanging toilet with installation, you need to find out the dimensions of the room where you are going to install new equipment. It should be remembered that the distance from the bowl to the toilet door or the opposite wall should not be less than 60 cm- only in this case, the use of the toilet will be most comfortable.

Installation selection

Wall models of toilet bowls are mounted on a special structure called an installation. In it are cistern, water inlet and outlet to the sewer. Let's look at how and what installation to choose for a new toilet.

The tank for such devices is usually made of plastic, has a flatter shape compared to. This allows take up little space during installation. In popular frame installations, the drain tank is already built into the structure.

Installations are:

Block- this option is inexpensive, but is attached only to the main wall. Such a structure cannot be mounted on thin partitions. It consists of a flat drain tank, plumbing, sewer fittings, fasteners for the toilet bowl.
frame is the most common design. Its basis is a frame to which all elements of the system are attached: a bowl, a tank, an eyeliner, a sewer outlet.
This option allows you to install the toilet anywhere, regardless of the quality and material of the wall. Frame installation is attached to the floor and walls, or only to the floor. Along with straight lines, there are angular variations. The disadvantage of such systems is a rather high price.

Having decided to install a hanging toilet, one should not forget that in addition to the size of the bowl, installation parameters must also be taken into account:

depth it usually ranges from 10 to 15 cm for block installations, from 15 to 30 cm for frame installations;
width- 50 - 60 cm for both types;
construction height- up to 100 cm for block installations, from 80 to 140 cm - for frame installations.

Thus, choosing one or another installation system, first of all, measure the room of the bathroom, and also decide on the installation site of the structure. Choose a place so that you make the most of the free space, so that no communications (, risers) interfere with the installation.

Remember that the shorter the distance from the sewer and water pipes to which you connect the toilet, the more reliable it will be in use.

If it is possible to hide the mounting system behind bearing wall- get a block design. If this is not possible, do not risk it, but choose a frame one. It is more expensive, but able to ensure the safe operation of the wall-hung toilet, designed for a large load (the design can withstand up to 400 kg). In addition, you can install it in any suitable place.

Necessary tools and materials

Work on the installation of this plumbing equipment can be done independently, saving a considerable amount. If you know what to do in what sequence, then the result will not upset you. So for this you will need the following materials:

toilet;
installation with cistern;
fastening elements;
building level;
soundproof lining;
air valves for sewage (not included) or plugs;
flush button;
tow, FUM tape and sealant.

Almost every home master has the tools that will be needed during work:

puncher or drill, a set of drills and drills for concrete;
screwdriver;
hacksaw for metal;
wrench;
ticks;
angle grinder (grinder).

How to install?

The first step is to install the installation frame, and then build a false wall that will disguise it, hiding the drain tank, sewer and water pipes.

Getting down to business

Before erecting a false wall, it is necessary to test the work of the mounted sewer system . To do this, temporarily hang the toilet bowl, and then, by connecting the water, check for the presence or absence of leaks in the pipe connections. If the test is successful, the water is turned off again and the toilet is removed before the false wall is finished.

Connection to water supply and sewerage

After the mounting structure is mounted and sealed, you can start installing the toilet itself. Let's consider this process step by step:

Remove the plastic sleeves from the studs for hanging the bowl, remove the plugs from the sewer pipes. Then attach the soundproofing pad. To do this, simply thread it through the studs and holes for the inlet and outlet of water.
Then the toilet is connected to the pipes fixed on the installation frame: the outlet is joined to the sewer outlet, pre-lubricated with sealant, the flush pipe from the drain tank is also connected to the corresponding hole in the sanitary ware.
Now the toilet bowl can be fixed on studs, which should protrude from mounting holes about 20 mm. It is fastened with nuts with gaskets, then protective sleeves with caps are again put on the studs.
Remove the parts of the soundproofing pad that protrude from under the edge of the bowl., treat the place of contact with the wall with sanitary sealant.
Mount the flush button. To do this, remove the cover from the hole intended for the button, install the lower part of the key, then the key itself.

Installation completed - equipment is ready for operation. You can turn on the water and enjoy!

Types of installations for the toilet

To date, there are 2 types of installations that have their own design features.

Block structures mounted only on the main walls and consist of a plastic tank with fittings. A set of fasteners is additionally attached to the toilet bowl. This type of installation for toilets is installed in a pre-prepared niche and is completely hidden in the wall. The main advantage of this design is accessibility, but if there are no main walls in the bathroom, then installation is impossible.

When purchasing a toilet, many people look at the shape and color scheme, few people think about the reliability of the product. A completely different attitude to the installation is a guarantee of durability and the absence of problems with plumbing for the next 10-20 years. Installing a toilet installation requires the master to have certain knowledge and skills.

The leaders of this market segment are German manufacturers - Grohe Vega and Geberit. By purchasing equipment from a well-known manufacturer, the owner of the toilet bowl does not have to worry about the quality, carefully checked at all stages of production. There are two types of frame designs for do-it-yourself installation:

block;
Frame.

The latter option is more popular among plumbers, because. provides more space design ideas. Most of all, this concerns the installation for the toilet, which must be mounted on its feet to the floor surface.

Tools

Installation of a toilet installation involves the use of certain tools for work:

Hammer drill with a drill diameter equal to the size of the dowels (supplied as standard);
A set of adjustable wrenches so that installation on your own is faster;
The building level required to set the frame in all planes without distortions;
Roulette for measuring the distance of the toilet bowl relative to the floor (approximately 41-45 cm).

Important: when measuring height, it is necessary to take into account that tile placed on the floor will raise the lower level by a few cm.

At the preparatory stage, the master must carefully study the composition of the package Supplies to the installation. If something is missing, these parts will have to be purchased. Unscrupulous manufacturers do not worry about the comfort of craftsmen who install the frame with their own hands and forget to put an anchor or damper gasket installed between the wall and the body of the toilet bowl.

Important: some locksmiths replace the above-designated gasket with a layer of adhesive-sealant, this does not affect the reliability of fasteners.

Installation process

The installation of the toilet installation is carried out before the start finishing works in the toilet, i.e. before tiling. Do-it-yourself algorithm for implementing this process:

Important: do-it-yourself installation should provide for maintenance of the structure subsequently. To do this, a technological hatch hole is often made under the drain button.

Economical models are those models of drain buttons that are bifurcated or have a start / stop function.

This article aims to clarify home master toilet frame installation issue. If some nuances remain unclear, you can always watch thematic videos on YouTube

Hanging toilets have firmly entered the lives of citizens due to their compactness and interesting look. Unlike ordinary specimens, they are not attached to the floor, but to the wall. With this attachment, the tank is hidden, and the connection to the sewer and the drain system are hidden in the toilet installation itself. So, the hinged design of the toilet bowl looks aesthetically pleasing and modern. In addition, it is very reliable and can withstand weights up to 400 kg.

Hanging tank design with installation

Before considering how to install a hanging toilet with an installation, you should choose it (about the rules), as well as determine the main components of the attachment mechanism.

The life of the plumbing device will depend on the quality of the chosen design. In general, the hanging toilet bowl consists of the following parts:

steel frame;
toilet bowls;
tank;
exhaust pipe;
sound insulation;
flush keys;
fasteners.

The sturdy frame is attached both to the floor and to the wall with special studs. It has rods for adjusting the height of the product. The drain tank of the structure is made of plastic, coated with a coating from condensate. On the front of the tank there is a special cutout in which the drain system is installed.

The choice of location and installation scheme for the toilet

A good location for the device is considered to be an impenetrable place away from the door, so you can choose the far wall. But at the same time, it should be borne in mind that all communications should be near the toilet so that they do not have to be brought across the whole room.

As preparatory work marking the location of the future structure is carried out. On the floor and wall on which the toilet will be mounted, the lines indicate the location of the frame and its connections to the surface. Start marking from the place where the central axis of the device will be located. Finally, you need to mark the mounting points of the installation frame on the wall and floor.

Before installation work it is worth studying a typical toilet installation installation scheme.

The main parameters for fastening the structure are:

the height of the toilet bowl - the average size is 430 mm;
the drain button should be approximately 1 meter above the facing floor;
minimum distance from wall to outer surface installation frame - 150 mm;
between the drain tank and the wall you need to maintain a gap of 20 mm.

It is better to install the toilet in a niche in which all the sewerage is hidden and the drain riser is located. If not, then you can build a drywall box.

Installation Tools

To perform all the work on installing the installation for the toilet, you need to have the following tools:

laser or regular level;
marker or construction pencil;
perforator, concrete drill;
yardstick;
overhead wrenches.

Installation Installation Instructions

Before carrying out installation work, you must first bring sewer pipe with a diameter of 110 mm, and then - water pipes.

Here are the step-by-step steps on how to install the installation for the toilet:

Fastening preparation . Holes are made in the wall at previously marked places using a perforator. Dowels are inserted into them. In this case, fastenings can be performed both diagonally and vertically. The installation frame has 4 mandatory fixings: 2 on the wall and 2 on the floor.
Installation metal structure . Produced by fastening, starting from the floor. Then the location of the frame is checked by the level and adjusted using the retractable devices provided on it.
Fixing the frame to the wall . It is carried out using special brackets, and in some cases you can use self-tapping screws or anchor screws.

After installing the frame, it is necessary to check the reliability of the structure, exclude its vibrations to the sides, otherwise it may tilt under heavy loads. After these steps, the do-it-yourself installation of the frame is completed.

Connection of water pipes and sewerage

This is the most critical part of arranging a new toilet bowl, because if a leak appears in one of the pipes, then the entire structure and wall cladding on which the hanging toilet bowl is located will have to be dismantled.

For such a toilet, only time-tested materials are used - it is better to choose pipes made of copper, and if material possibilities do not allow, then they should be replaced with polypropylene counterparts. The seams are sealed with tow. If it is necessary to use flexible hoses, they must be made of stainless steel.

The last step is to check all connections, which can be done by running water. Confirmation correct installation installations for the toilet - a clear operation of the entire system without leaks.

After the test run of the water, you need to install the pipes to which the toilet will be connected. The frame is provided with a crossbar, to which a special plate with a diametrical recess is attached. Thanks to him a drain pipe fixed on the installation. All actions for connecting pipes are performed according to the instructions.

False panel cladding

It is carried out after all plumbing work before installing the toilet. Since the structure is located in a kind of niche, it does not matter what material it will be sheathed with. Usually drywall is used for these purposes, and it is moisture resistant.

With this material, you can easily close the front wall with the frame placed on it. Drywall can be mounted on self-tapping screws, or on a pre-made frame of guide profiles.

After completing the lining in front of the tank, you need to insert a restrictive cuff, and then close the tank with a safety lid.

On drywall, you can lay any tile or other facing material.

Fixing the wall hung toilet

Do-it-yourself installation of a toilet bowl installation should be carried out taking into account the following rule: a rubber backing must be laid between the tile and the toilet bowl, which will protect not only the facing material from cracking, but also the bidet itself. If for some reason the factory substrate is lost, it can be replaced with a thick layer of sealant. When solidified, it will play the role of a cushion cushion.

Tightening the nuts and bolts on the toilet is also fraught with cracks and subsequent chipping, so softening substrates must be used when fastening them.

The final stage of the installation work is the installation of the drain button. How to install it correctly is described in the installation instructions. Before necessary work it is necessary to open the water and insert the cables from the tank into the holes located on the button.

The installation process ends with a check of the operability of the structure, this is its commissioning.

How to install a toilet installation? (video)

You can clearly see the installation of the installation for the toilet in the video below:

The wall hung toilet is aesthetically pleasing, stylish and reliable. All work on its installation can be done by hand, taking into account the above tips and instructions for installation.