In the world modern technologies It's hard to imagine a person who doesn't have mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge number on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is perfect solution for each.
Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.
What can you make a stand for a mobile phone?
Making something on your own gives wide opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:- paper; wood; plastic; gypsum; any natural materials.
DIY paper phone stand
It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:- colorful paper or white paper, which will then be decorated; multi-colored gouache, watercolor or acrylic paint; glue; a ruler for measurements; a simple pencil; scissors; various decorative ornaments, which will be appropriate, is also worth keeping on hand.
Properly organized space will help to make the stand for the phone with your own hands will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity to become the owner of a beautiful and convenient accessory for a mobile phone. Sequencing:
- First you need to figure out what shape the stand will be. After that, you need to draw templates of the required sizes on the sheet. Elements for the product are cut out from them. Then, carefully, according to the diagram that was previously drawn or printed from some site, we glue the necessary details. wait until all the elements are fixed. The next step is to connect the individual parts to each other. Let all the fasteners dry. After that, you can start decorating the product. At this stage, various sequins, buttons, beads and other small beautiful elements can be used. After decorating, the phone stand can be considered ready. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile phone, because it will always be in its place.
DIY wooden phone stand
There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True to do wooden stand, some sketches and ideas will not do. In this case, you will also need:- special equipment; skills; the ability to work with wood.
- the tree from which the structure will be constructed; tools for working with wood; product diagram; felt-tip pen with which you can draw on wood; ruler; glue; accessories (buttons, beads, rivets); a simple pencil.
After everything necessary elements were at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows: - First you need to find suitable scheme for the product. Then you need to put marks on a wooden base, along which the connector will be cut out in the future. The next step is to cut out the shape with the available tool. Then you need to take control measurements and find out if the mobile phone fits in the cut out connector. The next step is to smoothen the product. This can be done with a file or a special mains-operated device. When the surface is smooth, you can paint the finished shape with some color. After staining, you must wait for the product to dry. The work is completed by gluing the accessories selected for this mission. open with varnish, which will give shine and aesthetics.
Beautiful design of the phone stand
In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories are at home. It can be:- shells; buttons; rhinestones; beads; foil; colored tape.
In general, everything that is at hand and has unusual view, can be useful in the process of making a phone stand. Not only a necessary accessory, but also a great gift
Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.Homemade mahogany smartphone stand.
Hi all! Today we will make for a mobile phone in the form of a dog - a symbol of the year.
Now you need to make a stand for it. To do this, we cut out a circle with a diameter of 70 mm from wood. Sand it down with sandpaper.
We take a few gears that are so small.
We also take epoxy and hardener.
We take plasticine and apply a thin layer on one of the sides of the internal cavity of the figurine and glue it with polyethylene on the same side.
We knead the epoxy glue according to the instructions and pour about 2 mm into the cavity of the figure. This will be the first layer. We are waiting for the solidification of this layer. Then lay out our pattern of gears and fill in the rest.
Our dog is dry.
We remove plasticine. We take sandpaper and bring everything into a divine form.
We mark with a pencil on the figure the point where the hole will be.
Drill make a small indentation.
Now we make a wooden chop that will fix it all. We insert the chopstick into the stand, spread it with PVA glue and also the lower part of the figure with a thin layer so that the glue does not protrude. We connect. Leave until completely dry. Next, we rub our entire product with herbalist impregnation.
Here's what we got.
The mobile phone has become an indispensable attribute modern man. And on the road, and at home, and on the desktop, a useful gadget is given the main place, otherwise “suddenly someone calls, but I don’t hear / see.” For convenient placement of a cell phone on the table, coasters were invented. You can buy them in the store, or you can do it yourself from improvised materials. Even the most useless at first glance "unnecessary garbage", like a cardboard package from dairy products or a long-used cover for a disc, will come in handy in the work.
Cardboard stand
The first option is to make a cardboard stand for a mobile phone. This is not necessarily a single piece of material; you can take a used milk bag of a small volume (0.5 ml). It does not require anything to glue: you only need scissors.
The box must be thoroughly washed, crushed and cut off the bottom. Then cut along the folds.
The work will need a central part in the form of two rectangles. Between them is a fold. It must be cut out and folded with the outside inward, clamping the fold with one hand.
Starting from the opposite end, from below, you need to cut out a figure resembling the letter "T". It is narrowed upward, but has a beveled corner.
When the shape is expanded, the bottom edges become where the phone sits. It rests on the central edge. Budget stand is ready!
Stand from the cover for the disc
Surely everyone has a couple of DVDs lying around in the house. One of the unnecessary covers can be turned into a stand for a mobile phone.
To do this, the cover must be cut in half. Then cut off all the holes and rivets so that only an even rectangle with two bent corners at the ends remains.
The plate must be clamped with tweezers or pliers and lowered into boiling water. Thus, the plastic will become soft and pliable.
Holding the plate with pliers or any other tool, it must be bent so that one of the corner-ends does not slightly reach the other. 2-3 cm is enough, and the phone will be located in this space. One of the corners is glued to the surface. It turned out to be an interesting and light stand. The device can be placed on it both vertically and horizontally!
Paper clip stand
Paperclip mobile phone holder - interesting thing which can be done in 2 minutes. To do this, you need a large massive paper clip, which you just need to unbend correctly!
To begin with, the wire is completely straightened into a line. Then you need to clamp it and bend it again:
- Bend in the shape of a checkmark - U.
- Bend both ends at an angle of 90 ° C, starting approximately in the middle.
- Slightly bend the horses of each end.
Thus, an ordinary paper clip turned into a concise stand. The phone lies on it horizontally.
Toilet paper roll stand
As good as a used roll core toilet paper enough in every home! Do not rush to throw away the cardboard form - it can be turned into a mobile stand in a matter of minutes.
All that is required is to properly cut off part of the sleeve at an angle. A small piece of cardboard should remain in front to create an emphasis. Such a stand will not be able to accommodate a phone that is too tall, but standard size"sits" perfectly.
If desired, the stand can be decorated: painted, wrapped with cloth or pasted over with paper for gifts. And no one will believe that it was once part of a toilet roll.
all work step by step
Conclusion:
When working with familiar things, it is important to give free rein to imagination: try on, think, experiment. Then mobile phone stands will appear in the house regularly - and always different and interesting!
Show your child how easy it is to make a phone out of cardboard, plastic bottles. The phone stand is made from similar waste materials.
How to make a home phone from a plastic bottle?
But it will not be just a toy, the device includes an air freshener in granules, so it will also smell delicious.
To create this device, take:
- 500 ml plastic bottles;
- sharp knife;
- freshener in granules in a container;
- a straw from Bubble Tea tea;
- acrylic paints;
- brush;
- small foam balls;
- dark woolen thread;
- glue gun;
- iron;
- handle;
- awl.
Place one of these blanks to the fom, circle with a pen. Cut, remove this future dial to the side for now. Cover the cut edges of the bottom of the plastic bottles with glue, also attach them to the foamiran. Let the silicone cool, then cut out these circles along with the plastic blanks.
It is necessary to glue two foam balls to the back of the air freshener and make notches with a knife, in order to then lay the Bubble Tea tube here and fix it. But first you need to do some preparatory work.
From 1 and 2 sides of the straw you need to stick one small foam ball cut off the excess. In this way, you will make stubs in a straw, which will soon turn into a telephone receiver. This is necessary in order to thread a woolen thread here, which will act as a wire. Make holes on 1 and 2 sides of the foam plugs with sharp nail scissors or an awl, thread the thread here.
Secure it with hot glue. Apply it to the bottom of one and the second plastic bottles, which will become speakers. Place a straw between them to make a pipe.
Here's how to make a phone at home next. Color it in White color when the solution sets well, then apply a red layer. Wait until it dries, Take a brush with a straight cut pile, use it to apply white peas to the red surface of the phone and handset. Since the speaker is white, it needs to be covered with red dots.
Remember, you still have a circle of foamiran? Draw a dial on it, glue it to the center of the phone with a gun.
The work is completed, you can take the phone as a quality or to school so that the child takes first place in the competition. Or leave this toy at home so that you have such an original air freshener.
Progress does not stand still, such phones will soon become museum exhibits. Today's children already want to have cool devices. So that they can play with these, make them with them from the available material.
How to make an iPhone out of cardboard?
Let's consider several options. For the first you will need:
- corrugated board;
- pencil;
- scissors;
- black electrical tape;
- White paper;
- glue;
- transparent tape;
- Printer.
Now you need to paste over the front and back panels with white paper. We decorate the sides with black tape. Print out your iPhone keyboard and glue it to the front of your phone.
It remains to draw with a black marker on the panel the remaining elements of this telephone, after which you can admire the excellent work.
For option 2, instead of plain paper, use photo paper, print the front and rear panels of this telephone on it, the sides are all one blank.
As in the first case, cut out rectangular parts from cardboard with rounded edges, but you will need 1 or 2 of them. Fold the blank printed on photo paper accordingly without cutting it. You will get a single part, where the front and back panels will be at once, as well as all the sides of the phone. Put the cut out cardboard inside this blank, wrap the edges, glue them to fix them in this position.
If a small child enjoys spinning a dial, then show them how to make a phone out of cardboard by doing the work together.
Here's a believable toy you get. To do this, you must first prepare the following:
- corrugated board;
- a soft cheese lid or other suitable one;
- paper to match the cardboard;
- two pebbles;
- scissors with thin ends;
- pen or marker;
- glue;
- stationery nail;
- wire;
- cord;
- big scissors.
To make a dial for your phone, glue the cover and its sides with paper.
Using fine-tipped scissors, cut round holes in the dial. Of course, it is better to draw them first, so that this part of the work turns out. neat. To weight this part, you need to glue a couple of pebbles to it.
From corrugated cardboard cut out a small circle. Place it with reverse side dial, fasten these parts to each other, as well as to the phone case with a clerical nail, you can also use a bolt with a screw for this.
Write the numbers with a pen, roll up two levers from the wire, stick them into the top of the phone. To fix these details, make loops on the reverse side.
Now attach the blank of the phone to the corrugated cardboard with the sides, circle, cut out two elements from this material, glue them in place.
To make a phone tube, cut out two identical semi-circular pieces. Connect them at the top and bottom with a strip of cardboard. Make a hole in the bottom, pass the tape here, tie it into a couple of knots on the back side.
The child will be happy to play with such a phone, and it’s not scary if he rumples or gets dirty given subject. For the same purpose, parents make a keyboard and a computer out of cardboard for their children.
These are also great ideas to help keep your beloved child busy, and so that the baby does not spoil an expensive thing. And all this can be created from waste material, so the finished toys will be practically free, like the next one.
The handset will also become a new toy for the child.
To create one, take:
- corrugated cardboard;
- pencil;
- toothpick;
- scissors;
- hot glue.
Now, using scissors from the same material, create a strip 5-6 cm wide. By bending it slightly at the corners, glue it to the back of the tube. It is better to use adhesive tape for fastening. Using the same adhesive tape, attach the toothpicks to a small circle of cardboard, stick the other end of the toothpick into the top of the phone, gluing it here.
Cover the ends of the tubes with cardboard rectangles where the speaker and microphone are located.
Another corrugated cardboard rectangle will become the phone's keyboard. Also glue it from the inside with adhesive tape, apply the dial.
How to make a walkie-talkie from cups with your own hands?
This is another means of communication that will be a great toy for two children. After all, they can disperse even at a distance of 20 meters and hear each other perfectly. The trick here is that the sound is perfectly transmitted along a well-stretched thread, but first it hits the cup. The first person speaks into it, the second at this time puts his glass to his ear and hears everything well.
Here's how to make a walkie-talkie for such negotiations. Take:
- two cups made of cardboard or foam;
- awl;
- strong thin thread;
- two wooden sticks.
Now the children can go in different directions. The sound will be well transmitted when the thread is stretched. If you urgently need to take two kids, only yogurt cups are on hand, they will also work.
Other plastic cups you can also use, the method of attachment is covered in more detail in this photo.
Using these items, you can also make a phone stand. You will learn about the intricacies of this manufacture right now, we will continue this topic.
How to make a phone stand?
Quickly make this from what is at hand. As you can see it is:
- two plastic cups;
- toilet paper roll
- scotch;
If the speakers in the phone do not work well, the sound is weak, then place the device in a glass. Audibility will be better, and even this capacity will become a stand for him.
- If you need to quickly fix the phone to, for example, watch a video on it, and only pencils and rubber bands are at hand, this is what you need. You will need 6 pencils and 4 rubber bands.
- With these simple items you will collect geometric figure which is called a tetrahedron. To do this, first connect 3 pencils with an elastic band, which will become the tops.
- Then, to each resulting corner, attach one more pencil horizontally below, also fix them with rubber bands.
An empty plastic container for shampoo or hair gel is just a godsend for those who are thinking how to make a phone stand so that they can also charge it at the same time? Cut off the upper part with a neck from such a container, cut out a rectangle. On the reverse side of the same part with a knife or scissors, you need to remove a small square. You will thread the charger into this recess, and put the phone into the resulting pocket.
If you want to do desktop fixture, then wash the empty shampoo container well, dry it. Turn it upside down, cut off the bottom, cut out a frog-like figure. Here's how to make a phone stand out of similar plastic bottles.
From the remaining material, cut out the frog's soles with fingers, glue them with hot glue. From the usual plastic bottle you can build both a stand for the phone and handy device so you can hang it while charging.
To do this, you only need two items:
- clean plastic bottle;
- scissors.
Such accessories can be covered with stained glass paints to make them look even more interesting.
If it's over liquid soap in a vial, do not throw away the container. Rinse it well running water, dry. Cut off the excess, you get another stand for the phone, which will also help to charge it.
Another waste material will also contribute to the creation of such things. If you have cardboard left from the purchase, cut a strip of 10 by 20 cm from it, fold it in half. Draw a broken line as shown in the photo.
All you have to do is cut along this line, unfold the workpiece, straighten it, and you can conveniently position your smartphone.
If you have an unwanted plastic card, it will turn into a useful accessory in a minute. Fold it in half, folding up the top and bottom small sides. Here's how to make a phone stand very, very quickly.
If you still have a case from an old audio cassette, it will also quickly become a stand. Place a communication device in it. The Lego constructor will also help you quickly make this accessory.
If you give a paper clip a different shape, then it also quickly turns into a phone stand.
If you want to see various options how to make a phone stand from improvised means, then it is more convenient to sit at the screen and turn on the video player.
Mobile phones have firmly entered our everyday life. Even children already use them from the very first grades of school. In order not to leave your gadget just on the table, consider how to make a phone stand from improvised materials.
First option: from binders
Let's figure out how to make a phone stand with your own hands from what is in almost every home. There are quite a few ways. In this master class, we will make it from binders (paper clips).
This model is well suited for widescreen phones. It will turn out to be very convenient and practical, and it will take literally two minutes to create.
To work, you will need binders and a suction cup.
Production order:
- Connect the binder to the suction cup (a towel holder will work too) in the place where the hook is located.
- Attach the back of your phone to this suction cup when you need to put it down and you're done.
The advantage of this type is that you can place the phone in any position, both horizontally and vertically, or at an angle.
Second option: paper
When there are a lot of papers of different colors at hand, the modular origami technique comes to mind. Let's figure out how to make a phone stand out of paper.
To work, you need 24 white checkmarks and 23 pink ones. Check marks are the simplest element of modular origami.
To make modules, do the following:
- The triangular module is made up of rectangles to make them the same size, take an A4 sheet and cut it into 16 or 32 small rectangles.
- Fold the rectangle in half.
- And again in half, then unfold to make a fold line in the middle.
- Bend the edges of the rectangle to this line, and those where the first fold line goes.
- From below you have formed a ledge, bend its corners up to the edge of the first part.
- Now bend the entire remaining lower canvas up to get an even triangle on the back side.
- Fold it in half. And you will see that you have pockets on both sides.
Now let's move on to our question, how to make a phone stand from such modules:
- Fasten white checkmarks in a circle.
- Then place pink ones between each pair. So you get a cone tapering upward.
- Continue assembling the structure to the desired height and you're done.
This method is suitable for those who like to work with paper using the modular origami technique, if you like to cut and paste everything more, then pay attention to the following model.
Third option: from a shampoo bottle
How to make a DIY phone stand from a shampoo bottle? The work will turn out very stylish, despite simple materials, it will look expensive, as if purchased.
Manufacturing progress:
- Choose the right size shampoo bottle.
- Make a line in the middle and cut along it. For convenience, it is better not to do it straight, but to leave a protrusion with a slot on the back side, so that you can not only install the stand on the table, but also hang it on the wall.
- Take beautiful paper with an ornament (you can use a wrapper), wrap the stand with it and glue it.
- Carefully cut off the excess wrapper around the outline. Your work is ready.
This craft will look great in your home, especially if you choose the right color and pattern for wrapping paper. You can independently come up with a form for such work or make according to the model. This was one of the many ways to make a phone stand.
Fourth option: from popsicle sticks
One of the most original variants how to make a phone stand is to use popsicle sticks. To do this, ask friends and relatives in advance not to throw out such sticks.
When you collect enough, they will need to be glued together:
- first make the bottom;
- then the backrest to the height of the phone;
- the side ones will look good when tilted.
You can connect parts not only with glue, but also by gluing a transverse stick for greater strength.
There are many ways to make a phone stand from scrap materials. We have considered only a few of them. It all depends on your mood and imagination. Even from the old designer "Lego" you can make a great option or sew from thick fabric wonderful wall cover.
Use any idea. Enjoy your creativity!
