Treatment land plot- this is hard physical work that requires not only good health, but also significant time. Therefore, to make it easier to cultivate the land, many summer residents and rural residents use a mechanized method of cultivating their gardens. To do this, you only need to have desire, a clear head and hands that know how to make the necessary adaptations.
Making your own iron assistant for working on the site will not be difficult. After all, almost every owner keeps old spare parts from a car or household appliances, which are just useful for such purposes.
From things that seem unnecessary at first glance, you can easily make a walk-behind tractor or a homemade cultivator. Complex mechanisms made with our own hands are constantly improved and serve for a long time.
The simplest unit to manufacture is a chainsaw cultivator or an electric cultivator. But make a walk-behind tractor with your own hands from rear axle VAZ is much more complicated. This requires some knowledge of the technology and properties of metals, as well as plumbing skills and the use of special tools.
Having an electric cultivator for cultivating the soil in your yard saves time and physical strength. Of course, large areas cannot be cultivated with this unit, since its stroke is limited by the length of the power cord. But it is quite possible to loosen the soil in the garden, beds and flower beds. And due to the fact that it runs on electricity and not gasoline, it is used in large greenhouses and greenhouses.
Almost anyone familiar with the laws of electrical engineering and physics from a school course can build a homemade electric cultivator with their own hands.
Necessary materials:
Tools:
- Welding machine.
- Bulgarian.
- Set of keys, pliers, hammer.
Electric cultivator device
Using the example of the “Mole” mini-cultivator, well known since the 1980s, you can try to create a similar thing yourself. At first, it will be imperfect, but as you gain experience in making homemade products, such equipment becomes not only easy to use, but also multifunctional, and ultimately indispensable on your own plots of land. In order to make an electric cultivator with your own hands, the drawing and diagram are presented in the pictures.
Essential elements
The drawing shows best option devices. If desired, it can be simplified based on availability necessary details and the direct purpose of the unit. For example, you can remove the gearbox and shift handle and transfer the engine rotation through the intermediate shaft directly to the working element with knives. In this case, the clutch serves as a belt tensioning roller - this is also removed. And also for ease of control, you can assemble a single-wheeled cultivator.
The rotation speed of the loosening knives is controlled by the diameter of the driving and driven sprockets. By the way, instead of them and chains, various pulleys and belt drives are used. This lightens the weight of the unit and eliminates noise. In addition, the belt slips when the working knives hit stones or bush roots, which has a beneficial effect on the operation of the motor.
Three-phase motor connection diagram
Here Cp is the working capacitor. Simplified connection is often used, that is, without Wed. When starting the engine, the starting capacitor Sp is connected and then disconnected. To do this, use the button (Kn) from the old washing machine or circuit breaker, which is used on home electricity meters.
Device control
When the engine starts, the rotation of the working body with knives begins. In this case, it is necessary to hold the cultivator in place with the help of a coulter, which is deepened into the ground. After processing this piece of soil, the unit is lifted by the steering wheel, thereby releasing the coulter, and the cultivator moves to the next place. Further, similar actions occur.
This iron assistant can process up to 6 acres in one day, provided that the soil is normal and without roots. The depth of loosening depends on the length of the blades and engine power and can reach from 17 to 22 cm. For loamy and heavy soil, you need to install a motor of about 3 kW.
Making a walk-behind tractor
To do this, the electric motor is replaced with a motorcycle or other gasoline engine, which has higher power and has reverse (forward/backward). Instead of the loosening working tool, two additional wheels or lugs are installed and the speed is reduced due to the gearbox. Thus, from a simple cultivator a full-fledged walk-behind tractor is built, the mechanical capabilities of which are much higher. Further improvement leads to the creation of a mini tractor that is capable of not only working in the field, but also transporting loads using a trolley.
Attachments
To carry out planting and other work, a hiller is made from the disks of agricultural harrows, various cutters, a roller, a flat cutter for weeding, a plow-digger and other attachments that facilitate physical labor in the garden. Each of these devices has its own mount, which clings to a homemade walk-behind tractor.
Using a plow-digger, you can plant 10 acres of potatoes for one person within 2-4 hours. First, a furrow is made into which the seeds are laid. And when creating the second furrow, the first one is simultaneously backfilled. This way the potatoes are planted evenly and quickly. Digging is done using the same and exactly the same method. Just before this, you need to mow the tops with a lawn mower or trimmer, which you can also make yourself.
Types of homemade products
Milling cutter made from scrap materials.
This is one of simple homemade products, designed to loosen the soil to a depth of 27−30 cm. It consists of a frame welded from profile pipes 50×70 mm. The size of the frame itself depends on the engine used, which is usually installed on IZH-Planet, IZH-Jupiter motorcycles, Ant scooters or other similar equipment.
The cutters are assembled with a cross made of 5x40 mm steel plates, their ends are bent into an L shape and sharpened. There are 6-8 of them, evenly distributed and securely welded to the steel shaft.
The power unit itself, together with the gearbox and clutch, is installed on top of the frame, and the working shaft with cutters is installed below on bearings. The engine and shaft are connected with a standard motorcycle chain. The steering wheel is installed, the gas handle and the clutch lever are attached to it. Be sure to weld the mount for the opener to the frame. Without it, soil milling is impossible.
When you start the engine and engage first gear, the rotation of the working body with cutters begins. The processing speed is pretty decent. In 4-5 hours you can walk 10-12 acres. Please note that a motorcycle engine is naturally cooled. Therefore, after 40-50 minutes of continuous operation, it is allowed to cool. To successfully operate a rotary cutter, you need to construct a fan for the engine and force the air flow to its ribs.
Chainsaw-based motorized hoe.
Very lightweight design from a bicycle handlebar and any chainsaw. Everything is attached to a small frame. It has no wheels. A reduced copy of milling cutters is used as a working tool. The weeding width is 25-28 cm, the depth is 6-8 cm. The control handles are located directly on the steering wheel. The motorized hoe is very convenient to use between rows of plantings.
Homemade motorcycle board.
This design resembles a skateboard, only the diameter of the wheels is increased. The board is elongated. A chainsaw engine is installed at the rear. The controls are located on a curved handle, which is held while driving. The speed depends on the quality of the assembly of the mechanism and can reach 100 km/h.
Scooter made from bicycle.
For a real Kulibin, there is nothing more familiar than putting the engine from any moped on a bicycle, which is chosen with wheels of a smaller diameter. But it's not that simple. The spokes need to be strengthened, the structure itself must be arranged so that the engine does not interfere with the legs and at the same time is well blown by the oncoming air flow. It is advisable to make shock absorbers for the rear wheel, which makes it possible to drive on country roads. It is even possible to use standard wheels from a real scooter, but this involves altering the forks. Engine control is located on the steering wheel.
Any owner of a garden plot knows how tedious and painstaking the work associated with cultivating various crops can be. Moreover, such work is most often carried out by elderly people, for whom it is not so easy to cope with the loads associated with cultivating the soil before planting and during the cultivation of garden plants. To simplify this difficult process, there is an electric cultivator, which you can easily make with your own hands at home. Below are the simplest models of such structures.
Cultivator: concept, scope of application
An electric cultivator is a device equipped with an electric drive and designed for cultivating land. Thus, it can be a full-fledged analogue manual labor and will cope perfectly with the task of loosening the soil, applying fertilizers, creating beds and weeding them. In simple words, an electric cultivator is a mechanized chopper.
Attention! The device in question is not at all intended for cultivating large agricultural areas. But it is perfect for caring for a small flower garden, vegetable plot, etc.
The main task of the cultivator is to give the soil the necessary structure (it removes a layer of earth no more than 30 cm deep), thus preparing it for fertilizing, watering and other manipulations with the area planted with crops.
Among the main advantages of an electric cultivator are the following:
Making an electric cultivator with your own hands
With the help of simple devices, which can be found in almost every home where a man lives, you can make a simple, easy-to-use and, most importantly, practical cultivator that runs on electricity. Below we present to your attention the simplest models of such products.
Starter design
A cultivator from a starter can be made if there is a home garage starter from some car. In our case, we will talk about a starter from Gaz-51. In order for the part to perform its functions effectively and over a long period of time, you will need to perform some manipulations with the starter to improve it.
It is necessary to shorten the starter shaft slightly, after which it will be necessary to replace its front cover and make many holes with a diameter of about 5 mm both in the front and in back cover. Through these holes the air will be blown efficiently by a fan, which can perform this function using the shaft of an electric motor, for example, from some old truck. Cultivating cutters should be installed at the ends of the working shaft.
Engine
The semi-finished unit is mounted on a pre-prepared power platform made of sheet steel.
Advice. Since the design will be quite bulky, care should be taken to strengthen the base for the cultivator. For this purpose, longitudinal stiffeners are used, which are welded to the load platform.
Construction from an angle grinder
From a grinder you can make a compact cultivator of low power. It is quite enough for weeding rows in the garden or on a vegetable plot. The grinder in this design acts as an electric drive.
All other components for creating a cultivator can be taken from an old motor cultivator. The average power of an angle grinder is 600 rpm. So it won't suit her cutting wheel. The best option is to use a pulley with a groove for the V-belt.
The angle grinder suspension unit is welded to the frame of the old cultivator. To connect finished product You can use an extension cord on a reel to connect to the electrical network.
The finished product will be quite light, compact, and highly productive (the cutters of the device will produce about 300 rpm).
Advice. To make it more convenient to work with an electric cultivator and to prevent your hands from feeling overexertion, you can put small pieces of rubber hoses on the handles of the product that match the diameter of the cultivator pipes.
Washing machine design
If you have an old, completely useless (but still working) washing machine lying around your house, don’t rush to throw it away: try making a wonderful small electric cultivator using its motor.
To create it you will need a simple set of parts:
- An ordinary wheel with a diameter of about 1.5 m, which will perform the simplest function - propulsion.
- Electric motor from old washing machine(even the Soviet version will do).
- Metal corner about 3 m long.
- Twin wire.
- A drum and a piece of tin to create a protective casing.
- Springs from a car (they will make excellent knives).
- Gearbox, toggle switch and start button.
Now you can proceed directly to assembling the structural parts. The first step is to do everything welding work. Then comes the preparation of knives for the cultivator. For them to really work, you need to follow a simple rule: each of the knives must have its own trajectory of movement, and it should not intersect with all the others.
The motor will need two windings: working and starting. The first will be connected to the network in a permanent mode, while the second is necessary exclusively for launching a ready-made garden power tool.
These are all the subtleties that you should know to create a simple cultivator design that works effectively on the site. Good luck!
How to make an electric cultivator with your own hands: video
Such an assistant is very useful on the farm, and if you make an electric walk-behind tractor with your own hands, then it is doubly pleasant to work with it, it helps to carry out light work on cultivating and loosening the soil on personal plot. Compared to gasoline models, they are not as versatile and powerful, but they have their own advantages.
They weigh less, make less noise, are more economical to use, environmentally friendly and much cheaper than gasoline models. For a person who is completely unfamiliar with technology, the operation and maintenance of electric motor units will not raise any questions.
How to make an electric walk-behind tractor with your own hands
Electric motor units are used in enclosed spaces or areas with limited area. Possibility of access to the electrical network is the only condition for their use. If the model is battery-powered, then the lack of an electrical outlet will not be a problem. When using an electric walk-behind tractor, try not to overheat the engine, let it cool down.
It is also not recommended to use it on unplowed and heavy soils, due to which you will achieve an extended service life. Electric walk-behind tractors are equipped with additional functions that greatly facilitate the operator’s work.
For example, the service life will be extended by the automatic shutdown function when the engine overheats. The adjustable handle allows it to be adjusted to suit the operator.
Let's look at the design of the electric motoblock "Electrokrot", made with our own hands from its gasoline predecessor. First, let's look at the advantages of the resulting electric walk-behind tractor - simpler and easier to repair and operate, no need for gasoline. This model is also assembled by hand, using common parts and materials that are easy to find.
Homemade electric walk-behind tractor
To make an electric walk-behind tractor with your own hands, we start working with the frame using two pieces of channel No. 10 and a 32x32 corner.
We prepare two pieces of pipe by installing a bronze insert with a hole. The axle will pass through these holes. We weld the pipes on both sides of the frame. Next, an insert is secured through the walls of the pipe with screws. It can also serve as a sliding bearing.
Although ball bearings matched to the diameter of the pipe are better suited for this. To attach the handles to the top tube, brackets are welded. And the bracket for attaching the cultivator or plow holder is welded in the middle of the pipe.
Using screws on the frame, a platform is installed in the slots of the side ribs. The electric motor will be mounted on the holes that are available at the site.
The electric motor pulley is connected by a belt drive to a pulley on an axis, which is installed in the frame tube. An asterisk is superimposed on the other side of the axis. Using a chain transmission, it supplies movement to the sprocket, which is located below. A motorcycle or bicycle chain is used for chain transmission.
The movement of a homemade electric walk-behind tractor occurs thanks to a device for cultivating the soil. The curved knives are mounted on a square plate and are held in place by a key on the bottom axis. When they rotate, they loosen the earth and move forward due to bending.
Chain transmission and belt drive allow you to reduce the engine speed. Using the ratio of sprockets and pulleys, 200 or 1000 rpm can be achieved.
To control the movement, handles are attached to the bracket, on one of which there is a switch button. To connect the engine to the electrical network, a coil with a wound wire is placed on the axis between the handles. To form and cultivate a bed, you need to attach a holder to the frame on which soil-cultivating tools will be installed.
The only drawback of a homemade electric walk-behind tractor is that it is connected to a wire and, accordingly, to a power source. After all, he will not be able to move more than 50 meters from the network. Although this is quite enough for cultivating a personal plot.
Homemade electric walk-behind tractor video
Related Posts:
How to do homemade walk-behind tractor from a motorcycle engine, photo video instructions 
Wheels for a walk-behind tractor, how to choose and how to make it yourself 
Do-it-yourself reduction gear for a walk-behind tractor 
Making an all-terrain vehicle from a walk-behind tractor, choosing an engine and wheels 
We make a walk-behind tractor with our own hands, from a chainsaw description, photo, videoAnyone can assemble an electric cultivator on their own. For this you should prepare necessary materials and set aside some time. will become an indispensable assistant at the dacha or garden plot. Such a tool is in great demand during the planting season, especially for older people, for whom cultivating the land is a rather difficult task.
Main areas of application of the electric cultivator
An electric cultivator is a device equipped with an electric drive. This device is used in the process of cultivating land. With its help you can loosen the soil, apply fertilizers, and make beds. This device performs the basic functions of a hoe.
Using homemade cultivators, it is almost impossible to cultivate large areas or raise virgin soil. For these purposes, it is worth using a walk-behind tractor with a plow or a mini tractor. A homemade cultivator can be easily maintained small area vegetable beds, will become indispensable in flower beds or orchards. With its help you can easily cultivate the ground to a depth of 30 cm.
The electric cultivator runs on electricity, so it is environmentally friendly, unlike devices that run on gasoline. This makes it possible to use it in closed greenhouses or greenhouses.
Compared to gasoline analogues, an electric cultivator has a number of advantages:
- the relatively light weight of the device, this makes it possible to use the tool even for women and the elderly;
- its small size makes it easy to transport and store the cultivator;
- ease of operation allows you to use the device without special skills;
- the low price makes the instrument accessible to many.
Today there are a huge number of garden cultivators on the market, which differ from each other in some ways.
- Weight. The lightest models weigh only 10 kg, the heaviest models can reach 50 kg.
- Power. The simplest cultivator has a power of 1 to 2 hp. The most powerful options include models whose performance reaches from 7 to 12 hp. The degree of tillage will depend on the power. For heavy soil, it is worth choosing more powerful models.
- Appointments. Based on this feature, three main varieties can be distinguished: steam, universal, row-crop homemade electric cultivators.
- Price offers.
Return to contents
A homemade cultivator is a device that consists of a gearbox and an electric motor, they are located on a frame. All working elements are attached to the output shaft of the gearbox. Using the coupling element, the steering wheel is attached to the frame. Wheels are also attached to the frame. Some devices may be equipped with a steering wheel that can be adjusted in height and position.
To make it easier to perform earthworks, it’s worth making an electric cultivator yourself. Anyone who has an understanding of technology can do this. A homemade cultivator consists of a small number of parts.
Materials for assembling homemade electric cultivators:
- motor from a meat grinder;
- pipes;
- corner;
- screw;
- wheels with good axle;
Tools that will be required to carry out the work:
- welding machine;
- hand tools - hammer, pliers;
- a set of keys.
Soil cultivation is one of the main agrotechnical activities, which is a mandatory part of the annual soil cultivation regime. Thanks to this process, the soil is loosened and mixed, more weeds are destroyed, and the field surface is leveled.
This process is carried out using cultivators. Also, there is the concept of deep loosening, during which, without turning over, the soil is loosened to a depth of more than 12 centimeters. For this purpose, special devices are used - chisel cultivators.
Cultivation is necessary because it greatly improves the quality of the soil, making it more suitable for the growth of any crops.
After cultivation, water and air conditions improve, beneficial microorganisms are activated. Thanks to this, the productivity of the land increases, the number of sprouted seeds increases and the quality of the harvest improves.
As a result of cultivation, upper layer soil becomes more fertile– the resulting loosened layer holds moisture much better and prevents its evaporation.
Also, the site not only becomes more level and convenient to process, but also contains a much smaller number of weeds that can simply choke the crop after it rises - when this moment comes, remove them without damaging them useful plants very difficult.
Also, cultivation is especially useful for soil in places with a dry climate, where the upper, fertile layers of soil are not able to retain enough moisture necessary for the normal growth of most crops.
Digging up the earth, in this case, leads to even greater losses and a complete imbalance - the harvest may be even worse than if the ground was not dug.
About the manufacturer
On large areas, cultivation is carried out using special equipment - a tractor, to which cultivators of various designs are attached, with different shapes of cutters, which perform loosening.
But the use of such equipment and the use of complex technologies and cultivation methods are not profitable in areas with a small area.
Therefore, in order to achieve good results when harvesting in household, on areas of about one hectare they are widely used walk-behind tractors and walk-behind cultivators with appropriate attachments.
Cultivators for the garden, manual, electric for the dacha, have proven their usefulness more than once, as well as their efficiency - depending on exactly what area needs to be cultivated and what additional functions should this technique perform, you can choose exactly what is best suited for the future owner of the walk-behind tractor (or try to make homemade products for the walk-behind tractor, new versions).
In addition, if necessary, you can make a lot of additional equipment for the walk-behind tractor yourself, using only what is in stock this moment“on the farm” - from scrap materials, products are obtained that are not inferior in functionality to products assembled in a factory.
But still, even walk-behind tractors, regardless of where and by whom they are made, have their drawbacks. First of all, this is the main part of each product - the engine. Regardless of whether it is gasoline or diesel, it still requires care and repair (adjusting the carburetor of a walk-behind tractor is not so difficult).
Any engine needs to change the oil regularly, each of them has parts and Consumables, which wear out very quickly and also require regular replacement.
The same applies to attachments- there are variations of it a large number of, but most often only a small part of it is used, just a few devices, which also need repairs, which cannot always be done quickly, especially if the workshop does not have its own personal welding machine.
And without it, doing anything is very difficult and even impossible. Therefore, in order to make the task easier for gardeners in cultivating the land, the Muromskaya PROMTECH company offers an alternative to bulky devices - cultivator LopLosh.
The company is engaged in the manufacture of highly specialized mechanical devices with electric drives and parts for them.
The products of this company have already gained trust and become popular among owners of small farms, thanks to their convenience and practicality.
LopLosh, the name of which comes from two words - shovel and horse, is especially popular.
Features of their design, horizontal cutters, Electrical engine as a drive and convenient design allow you to cultivate almost any soil without special costs time, effort and resources.
In this area they compete successfully with any other devices and mechanisms, such as: cultivator Mantis, Cayman, Viking, Texas, Swift, Champion, Patriot, outperforming them in many respects.
Popular models
For those who like the LopLosh cultivator, the price will depend on which model they choose. In total, the line includes three models, which differ from each other in power, and, accordingly, in the type of soil they are capable of processing.
But unites everyone special design horizontally positioned cutters. There are three of them in total, two of which are power, operating at a speed of 300 rpm. They are designed for loosening and weeding the soil, and in fact, perform the main function.
One milling cutter has higher revs - it used for mulching, development of virgin soil.
1100
Electric cultivator LopLosh 1100, this is a device with the lowest power that are presented on the equipment market - it is about 1.1 kilowatts. This power is quite enough to cultivate light soil at a fairly fast pace.
The electric motor installed on this product is asynchronous, single-phase, and operates in continuous operation. The weight of the entire product is approximately 35 kilograms, the working width is 30 centimeters, and the tillage depth is 18 centimeters.
The price of this product is Russian market is about 16,900 rubles.
1500
Electric cultivator LopLosh 1500, second most powerful cultivator. Basically, it is identical to the previous model, with the exception of some parameters, such as the engine power, which is already 1.5 kilowatts, and the weight is 37 kilograms.
The remaining characteristics are absolutely identical - single-phase asynchronous motor, long-term operating mode, soil working width – 30 centimeters, soil processing depth – 18 centimeters. The average price of this product is 18,400 rubles.
2000
Electric cultivator LopLosh 2000, the most powerful product from the LopLosh line of cultivators. The engine power installed on this model is 2 kilowatts. It is capable of continuous operation and weighs about 38 kilograms.
This device is the best option for owners of areas with heavy soil, since out of the entire line of cultivators, it has enough power to loosen most of them in a single pass.
In this video, the presented model is launched.
With your own hands
In fact, making a loplosh cultivator with your own hands will be not that hard. All you need is a strong frame to which all the components will be attached - control handles, support stand and electric motor.
The main part, the engine, of course, will need to be chosen responsibly, since it will need not just more power, at least one kilowatt, but also reliability - it will be located on a loose structure.
The power cable must be selected in such a way that its insulation is resistant to all possible influences, because it most time will be outside and lying on the ground.
Also, in order to ensure reliability, good fittings are needed - all switches and relays must be designed to be used in difficult conditions and with large vibrations, which over time can render them unusable, beyond the possibility of repair.
One of the most labor-intensive activities in agriculture is harvesting. With the Polesye combine harvester you will quickly and efficiently harvest the entire crop.
A snowmobile will help you get around in snowy areas. The Ermak snowmobile is quality, speed and reliability.
A garden sprayer is an important and highly effective tool that allows you to protect plants, provide timely fertilizing and preventive maintenance. You can learn how to make a sprayer yourself.
Frame and metal components can be made from any metal, only with the exception of the handles - they need to be insulated as best as possible to avoid electric shock if electricity, somehow gets on the body.
The only serious problem can be the manufacture of a gearbox to transmit torque to the knife shafts.
In fact, it will be quite difficult to make it at home.
But, if the correspondence homemade design it doesn’t matter to the original, three knives can be easily replaced with two, or even one - as you know, the main thing is not the quantity, but the ability to use. In this way, a single blade can be connected directly to the motor, without the need for additional parts.
User manual
For those household owners who purchased a LopLosh cultivator, the operating instructions will explain main functions and method of work on cultivation and mulching.
It consists of several points and sub-points that describe the purpose of the device: loosening the soil, forming furrows, hilling manure, processing turf, chopping weeds, cultivating between rows. Below are the technical data of the model for which the manual and delivery kit are provided, what is included in it.
The following are safety requirements when working with the device: avoid working with the device in the rain, use special clothing, and during setup and maintenance of the device, it is necessary to disconnect it from the network. When cultivating the soil, the power cable must be kept in a visible place and must always be in sight.
The next point is a description of the device, where all the main parts of the device are indicated, the sequence of their connections. Practically processes are described at the end of the instructions, which can be performed using LopLosh and the procedure for preparing the product for their implementation:
- For loosening, left and right knives are installed on the shafts, and side walls are installed on the gearbox.
- The knives must be installed in such a way that their cutting part is directed in the direction of rotation. The walls are fastened in such a way that the fastening studs become on their seats, they need to be secured with nuts.
- The depth at which loosening will be carried out must be set by installing booms, above or below the knives.
- For mulching, it is enough to install a special knife on the high-speed shaft, and you need to install side walls on the gearbox.
- In order to form furrows with the help of LopLosh, you need install several knives– the left and right row-crop knives are placed on the power shafts, and a hiller is installed on the gearbox, point-blank to it.
In this video, the formation of beds using a LopLosh cultivator.
After the device is prepared for one of the operations, it is necessary to position it correctly on the treated soil. This process is described in the next paragraph of the instructions.
The main conditions are the installation of the device in the correct direction, with the handles in the direction of movement, and the placement of the power cable, which must be placed in rings on the leash.
Movement during tillage can be carried out at maximum speed, at which there are no signs of heavy load on the engine - it does not make any extraneous noise and does not overheat.
Conclusion
In the household, in the garden, in the field, in order to make work easier and achieve good results, use only old ones, old-fashioned methods not enough. With just one simple implement, you can successfully cope with only a few hundred square meters of light soil.
But in order to cultivate a large area of land with heavy soil, make it fertile and productive good harvest is possible only with the help of special devices specifically designed for this purpose.
This is exactly what LopLosh is - simple in design, This device allows you to do a large amount of work in a very short time. Despite the fact that its price is higher than the cost of a simple shovel, the result will be much higher than the initial costs.
A caterpillar attachment to a walk-behind tractor will be a useful addition, we recommend that you familiarize yourself with it.
