Uniqueness paper crafts in that their implementation requires safe materials available to any family. Possession of such art is within the power of a small child. You can attract a boy to needlework by creating toys out of paper only by getting him interested in this activity. Offer the little man options on how to make and print a car, car, truck and KAMAZ out of paper using a gluing template.

The uniqueness of paper crafts is that they require safe materials available to any family.

How to fold or assemble a paper police car using origami: a simple diagram and drawings

Crafts can be done both for the game and original gift good friend- to an adult. Since men are always boys at heart, an origami machine made from a banknote is suitable as a gift.

You will need:

• Rectangular sheets of colored paper;
• scissors, glue.

How to make a toy car:

1. Fold the sheet of paper of your choice horizontally. This is the central inflection of the future product.
2. With parallel fold lines, fold the two halves of the sheet on the left and right sides inward.
3. Bend the bends back inward. Then turn the ends of the sheet in the direction from the wrong side.
4. Bent bends internal corners form the body of an improvised paper machine.
5. Under the wheels, make folds inward with triangles. To achieve maximum resemblance to the wheel, bend the corner peaks inward.
6. For headlights, the right corners of the car are also internally bent. On the left side, we do the kinks in the same way, but smaller in size and outward.

For a more colorful car manufacturing, stick paper triangles of a different color on the headlights.

How to make a paper car in 3 minutes (video)

Gallery: paper machine (25 photos)

How to make a car that rides out of paper

From paper you can make a moving car for the race. To start the movement, put such a craft on smooth surface and blow on her. Under the action of the air flow, the figure begins to slide along the surface, imitating the movement of a real racing car.

Necessary:

• A sheet of white paper with a side ratio of 1:7 or A 4.

You can make a moving car out of paper

How to do:

1. Fold the paper sheet in half lengthwise.
2. Mark the fold lines by folding the top right and bottom left corners of the paper.
3. Form a bend in the upper part of the sheet with inner triangles in the center.
4. In the central direction, bend the existing triangles again.
5. By bending the sides inward towards the center line, we form the sides of the car.
6. Fold the bottom of the sheet with triangles over the top of the craft, then fold the figure in half. Tuck corners into pockets.
7. Now the model of the car can be decorated as you wish.

By helping and guiding the child's work, you can add up a whole racing fleet.

How to make a truck out of paper

Figure truck looks more impressive in volumetric format.

You will need:

• Thick paper;
• Glue, scissors;
• Wooden skewers;
• Double-sided adhesive tape;
• Plastic bottle;
• Compass, pin.

The figure of a truck looks more impressive in a three-dimensional format

How to do:

1. Cut separately four squares for the cabin, three equal rectangles and two squares for the body.
2. Fold two boxes from the cut out figures, connect them with fasteners using adhesive tape inside. You can first cut out the side windows from the two squares of the cab, securing pieces of plastic from the inside with adhesive tape. We do the same with the front of the craft, simulating the windshield. Glue the cab and body parts together.
3. On black paper, use a compass to designate eight small circles of the same size with a central dot. For stability, glue future wheels in two circles. Make a small hole at the center point with a pin.
4. Attach the wheels through symmetrical opposite holes on the sides of the figure, putting them on skewers through the hole.
5. Paint the figure of the truck with paints as desired.

The stability of the model will ensure the strength of the wheels - the more circles are glued at the base of the wheel, the better the craft will be.

How to make a war machine out of paper

You will need:

• Sheet thick paper dark green;
• Skewers;
• Scissors, compasses;
• Pencil, ruler, glue;
• Black paints, brush;
• Paper tubes or plastic cocktail tubes.

the finished product can be further decorated

How to do:

1. Draw four squares for the cockpit. On another sheet, draw three rectangles and two squares for the body. Separately, take a sheet, fold it lengthwise into three parts, glue it with a triangle - this will be a mount for rockets.
2. Draw side windows on the cab details, windshield on the front square. Glue the squares wrong side tape or strips of paper.
3. Connect the car body parts in the same way. Glue a paper triangle on top.
4. Combine the finished cabin and body into a single model of the car.
5. From black paper, make the same eight circles with a central dot. In the designation, make a hole for the skewers with a needle.
6. Make holes at the bottom of the cab and body with skewers, string wheels on them. So that the structure does not fall apart, soak the ends of the skewers in glue, dry.
7. Cut the cocktail tube into equal parts, about 3 cm each. Paint all the segments black. Let dry well.
8. Gently put homemade rockets on the body mount with glue.

For decoration military machine paper can be drawn finished product dark spots on the sides (or stripes on the hood) with watercolors.

paper race car

The figure of this racing car was designed for the little ones.

Necessary:

• Roll off toilet paper;
• Paints, brush;
• Cardboard, compasses, scissors;
• Toothpicks 2 pcs.

The figure of this racing car was designed for the little ones.

How to do:

1. Clean the paper roll from the remnants of toilet paper, paint it in the desired color with watercolors. Draw dry ballpoint pens racing signs.
2. With a compass, mark four equal circles for the wheels, cut out, paint with black paint.
3. At the base of the roll, pierce holes for the axis with a pin - toothpicks.
4. String the roll on toothpicks, fasten on both sides of each wheel.
5. Cut a semicircle in the upper part, bending the outer part like a windshield.
6. Inside, you can put a little man cut out of paper by attaching it with tape.

To make the wheels of the car spin, put a drop of glue on the ends of the toothpicks. Dried glue will prevent the removal of paper wheels when driving.

Paper car sweep diagram: how to make

The machine sweep diagram can be downloaded from the Internet. The presented models allow you to make any kind of equipment from paper from special to Soviet times.

To make a figure according to the scheme, you must:

• Selected scheme of the car model;
• Scissors, cardboard;
• Glue.

How to do:

1. For the stability of the future figure, stick the picture of the scheme on cardboard. Trim after drying.
2. Fold along the lines of the layout details. Glue them, carefully hiding the places of gluing.

How to make a paper car (video)

Assembling an origami machine or its schematic construction will seem a bit complicated at first. However, a fascinating and informative activity will delight the future designer. Handmade develops the thinking of the baby, helping to improve the fine motor skills of the hands. And the made machine will become the most beloved of all toys.

Making crafts with children always gives positive results. The motor skills of the hands and fingers, the eye, orientation in space, the ability to use scissors, the strength of the hands and fingers, creativity and imagination are developing. Children repeat the features of cars, find out what parts they consist of. All this develops the thinking of kids.

Joint activities with parents also have their pleasant side. The child's speech develops, the ability to distribute responsibilities, take the initiative. If the parents decide to do needlework at home with the boy, then they will not find a better pastime than making a car out of paper with their own hands. Imagine several options for cars made of paper and cardboard.

Racing car

Need the following materials: cardboard cylinder (remaining after using toilet paper), black and white cardboard, scissors, white and colored paper, felt-tip pen, pushpins, PVA glue.

First you need to take the cylinder and glue it with colored paper. We cut out 4 black circles under the stencil and 4 smaller white circles for future wheels. If you want there to be no holes in front and behind, then you need to circle the round part of the cylinder on a sheet of any colored paper. Next, cut out the circle. bigger size, cut the excess in the form of triangles, on which glue is subsequently applied. Then everything is glued to the end of the cylinder. Before gluing the circles on the back and front of the cylinder, you need to stick or draw on the headlights, grille or rear brake lights.

Then it remains to collect together all the details of the machine from paper with your own hands. For the driver, you need to cut a hole with scissors. The wheels in the center should be pierced with a button and bent inside it. At the end of the work, you need to draw decorations on colored paper. For example, a number or stripes on the sides, because the created car is a racing car.

locomotive

The next option for making a car out of paper with your own hands will be a toy steam locomotive. It has two main parts: the driver's cab and the trailer. To get started, you need to prepare scissors, PVA glue, corrugated packaging cardboard, colored paper, bolts with nuts, a rope and an awl.

On the cardboard you need to draw the shape of a steam locomotive and a trailer and 8 identical circles for the wheels. Carefully cut out the details, you should glue them with colored paper. The application should be detailed: a pipe, a driver's window, headlights, wheels, square windows can also be glued onto the trailer.

At the end, the parts are assembled. It will be interesting for the boy to work with real tools: pierce holes for wheels and rope with an awl, tighten bolts and nuts, tie the trailer to the train with a rope. Before making paper with his own hands, dad must explain the safety precautions for using scissors and an awl. The engine assembled in this way will roll, and it will be more interesting for the boy to play with him.

Machine according to the scheme

An interesting option would be independent production do-it-yourself paper machines according to the schemes. Models of real cars can be purchased at the store, or you can follow the example to draw your own version of the model. Using the template, draw all the details in 3D projection. Next, with scissors, carefully cut along the contour and bend the edges of all parts. Glue is applied to the triangular corners, and the machine is assembled.

It should be noted that the wheels will not spin. This craft is perfect for kids. school age, since it requires complex preparatory work. To kids preschool age you can offer a purchase version of a printed typewriter simpler. They will only have to cut along the contour and glue the edges.

origami car

This is the most difficult of the proposed options. How to make an origami car out of paper with your own hands is shown in the diagram. First you need to have some experience in folding sheets. You need to start with a boat or an airplane, and then move on to a typewriter. The only requirement that must be observed with the origami technique is to carefully and evenly bend the parts by running your finger along the edge of the fold on the table.

The smoother the fold, the neater the end result looks. For the first time, work must be done under the guidance of an adult. These may be educators kindergarten, teachers elementary school or parents. Subsequently, understanding how to use the schematic instructions, the child will be able to make a car out of paper with his own hands. After the craft is completely ready, it can be painted, adding details.

Every boy loves to play with cars, he will not soon collect metal structure, but teaching a child to make paper models is very easy. Parents will need a little time, paper, glue and scissors. You can create such cars using the origami technique or a 3D design, for each method there are necessary materials, instructions and recommendations.

How to make a car from waste material?

The older the boy becomes, the more he will be interested in complex models, including those made of paper. It remains for parents to suggest which creativity is more exciting, to provide the necessary materials and a good mood to complete the task. For boys, among all models, it is cars that enjoy great prestige, and buy every day different designs will cost the parents a pretty penny. After a while, the child will lose all interest in these beautiful cars, so it’s more interesting and more useful to make a design on your own. It does not require large financial costs, it is enough desire and time.

You can create cars not only with the help of ready-made schemes, but also using improvised means, for example, cardboard and matches, wooden sticks and colored paper. For example, take a few cardboard cylinders left after toilet paper, glue each one with colored paper. After the fake dries, it is necessary to cut a rectangular hole on the surface of the cylinder, leave a little space on one side so that you can bend it and thus make a seat for the driver.

The design can also be decorated inside with felt-tip pens or a marker, to create a steering wheel, you should cut a circle out of white paper and glue it opposite the seat. The car can be additionally decorated with colored paper applications, choosing different shades. If the car is racing, you can put a number if ambulance or a fire model, then you can also cut out the corresponding signs or draw them. To fasten the wheels, use small bolts or caps from a plastic bottle.

Volumetric 3D paper cars

To perform the work, it is necessary to prepare a printer, a paper sheet, scissors, cardboard material, as well as glue, colored pencils, paints or felt-tip pens.

The instruction is very simple, you can assemble a car out of paper without special skills or knowledge. First you need to print on paper a model of the machine you like, then stick the sheet on cardboard to make the design durable. The image is cut out along the contour, this is another advantage of this technique of creating a paper typewriter.

Important ! All lines are already marked on the sheet, so it will be easy for the child to fold the model, just bend along the contour and hide the remaining wings of the workpiece inside.

These white ends must be glued so that the structure does not fall apart, and if the cardboard is strong enough, then you can use not stationery PVA, but super glue. After that, the boy is left with the most interesting thing, to decorate the car at his discretion.

An easy way to make a paper car

Paper cars are just as fun to play with as metal or plastic ones, you can arrange real races, and you can also build a garage, decorating all the structures with felt-tip pens, and using a toothpick to make a flag.

To create a paper machine, you need a square piece of paper, it should be folded in half, after which the edges should be unfolded and reverse side bend them to the middle of the sheet. Then, wrap the edges again in the opposite direction and fold the sheet of paper in half. Apply the outline of the car to the material, to do this, wrap the upper corners, then tuck them inward, two corners will peek out from below. They are also folded inward, after which it is necessary to make the wheels of the car.

Bend the lower corners back, rounding them a little, so you get wheels, in front, to make headlights, the corners must be laid inward. Do the same from the back of the machine, all the details vehicle you can draw, for example, wheels, headlights, doors or a driver behind the wheel. 15 minutes of time and a beautiful paper car is ready.

Origami car

This unique art, which involves the creation of unusual paper figures, including cars. To work, it is enough to stock up on colored paper and patience, it is very easy, so children not only can, but also need to be connected, together you can create a whole car park. Or you can make a car out of a banknote and give it as a gift to a friend.

To create, for example, a sports car, you need to take a rectangular sheet, as a rule, the aspect ratio should be equal to 1:7. The work begins with the fact that the upper right and left corners are bent, so all the necessary folds are created. The next stage is the bending of the upper part of the sheet, along with the folded corners on the left and right. Small triangles will remain sticking out, which should also be folded towards the middle of the sheet of paper.

Next, you need to bend the sides of the leaf, fold the bottom, follow the same algorithm that was performed when folding the top of the paper. It remains only to fold the structure in half, fill in the triangles that look out and that's it, the machine is ready.

We will need: matches, a compass, a ruler, a pencil (well sharpened), a notebook, a protractor (you can do without it).

1. Let's make an assembly panel as an auxiliary tool for making crafts. First, draw a template for the machine. Here is a drawing for the manufacture of a wheel consisting of 15 links. Let's draw a circle with a radius of 4.2 cm using a compass and divide it using a protractor into 15 sectors of the same size (24 degrees).

In principle, a wheel can consist of 14 links. And such a design would be even more preferable, since with 15 links the bearing matches have a very high voltage.

2. As soon as the drawing of the tool is ready, you can begin to manufacture it. We take an unnecessary book that has a hard cover and cut off the cover from it. Next, we will use a hammer and a nail to knock out holes on this cover.

3. Cut out the drawing and paste it on the cover. We punch holes in it in the places marked on the drawing. The backing can be the same book from which the cover was cut.

Such a book may well be, for example, a book about Friedrich Engels and Karl Marx.

4. Let's start assembling the wheel. We select matches, discard split, thin, bent and crooked ones. We stick support matches into the assembly panel.

5. We begin to fill the gaps between the supporting elements with load-bearing matches. Each next match must overlap the previous one.

6. We raise the first match-carrying ring in advance. She will overlap the last 2 matches of this ring.

7. We push the penultimate carrier match.

8. We put the last match in the ring.

9. Press the first 2 matches of the ring down, then press down the rest of the matches of the ring. By analogy, we lay the second ring.

10. Lay the third ring.

11. Lay the fourth ring.

12. Lay the fifth ring. Once again, we will consider in detail the process of laying the last two bearing matches.

13. Raise the first carrier match.

14. We push the penultimate carrier match.

15. We put the last match in the ring.

16. Gently press down all the match-carrying wheels. After that, the assembly panel can be lifted.

17. We turn the assembly panel over and begin to gently squeeze the support matches out of the holes in a crosswise pattern. To do this, you can use a match.

The wheel of matches is ready.

25.02.2011 G. I. Turning. Updated 04.04.15

Page 3 of 21

Making paper wheels

To avoid repetition, a description of the manufacture of wheels is given separately. In the relevant texts, there are only the dimensions of these parts and a link to a drawing that explains how to make a wheel. Here are the most simple designs. Comfortable material for the manufacture of wheels is serpentine. Such details can be made multi-colored, for example, a part of the wheel (inner) can be made of one color, a serpentine of a different color can be wound on top. To prevent the material from untwisting, its ends are glued. IN wooden models wheels are best made from plywood. Some designs may use other materials such as empty spools.

The simplest is a wheel made of cardboard. A circle of the desired diameter is drawn on the material and a disk is cut out. If you need to make many identical parts of small diameter, it is better to use special tools - notches. In circle work, this tool is necessary, as it allows you to simplify the process of manufacturing disks and improve their quality. You can make a few cuts yourself. To do this, take a small tube of the desired diameter and sharpen one end. Cutting is best done on the end of a wooden chock or thick timber. Wheels from one disk are glued to the model directly.

For complicated models, wheels are made from several disks. Prepare required amount identical parts, lubricate them with glue and connect 2-4 discs together. To make the wheel beautiful, a circle of a smaller diameter is cut out of thin paper and glued to the workpiece. A hole for the axle is pierced in the center with an awl. Then a protector is drawn with a felt-tip pen (Fig. 41 a - d).

With good work skills, the design of the wheel can be complicated to make it look voluminous and beautiful. A strip is cut out of thick paper, teeth-valves are made along the edges, they are bent, and a ring is glued from the workpiece. Then two cardboard discs are cut out, a hole is pierced in the center with an awl and glued to the ring on both sides. In conclusion, finishing is performed (Fig. 41, (e - h).