Nowadays, blinds have gained considerable popularity - they are installed both in private homes and in offices. Most often, installation of systems is carried out by specialists, but installing blinds on a plastic window with your own hands is also quite possible and does not even require any special skills or tools. You can install these curtains in several ways, the choice of which depends on the interior and functionality.
Varieties
Today in the assortment of hardware stores there are several varieties of blinds. Depending on the specific type, the features of attaching curtains change.
On sale you can find several varieties of horizontal blinds at once. The lamellas in them are installed horizontally, which is the reason for the name of the design. The thickness, width and type of material can be arbitrary. The design can be mounted inside the frame, to the frame itself, to the slope or on top of the window block.
Horizontal blinds are most often mounted in institutions
Install similar blinds in offices, on production facilities and other places. These designs are universal - if desired, you can find horizontal blinds of almost any color and shade.
Due to the design features, such blinds are most often mounted on top of windows.. The slats in this case are oriented vertically, made of plastic or fabric. There are varieties on the market that differ in the length of the lamellae.
Vertical blinds mainly installed in residential areas Installation of this model is most often done in private homes, but they are also in demand in offices. Installation of vertical blinds is carried out on self-tapping screws. As an alternative, ceiling mounting is practiced.
Roller blinds are made of fabric, completely cover the glass, if desired, they can be lifted by rolling into a roll. Installation is carried out using brackets, self-tapping screws or adhesive tape.
Roller blinds can be installed without drilling walls and shutters - on double-sided tape The need for drilling varies depending on the type:
- Vertical structures are mounted on top of the window or under the ceiling. In both cases, you will have to drill the surface.
- Horizontal blinds can be attached to the top slope or window sashes. Without drilling, such structures can be mounted on the sashes of the window unit.
- Interframe analog, as you might guess from the name, is designed to be installed inside the window itself. This option requires drilling most holes.
Preparation and measurements
To install the blinds, you will need the following tool:
- screwdriver or screwdriver;
- pencil or marker;
- roulette.
So that all efforts are not in vain, it is important to correctly and accurately perform measurements - only then the design will work efficiently. In addition, it must be absolutely symmetrical to the double-glazed window. Blinds attached with adhesive tape are more tolerant of errors - if desired, they can be corrected. For analogs with fastening on self-tapping screws, it will be necessary to make additional holes, which is unlikely to benefit the beauty of the window, flaws are unacceptable here.
At the first stage of installation, blinds measure the width and height of the window. For the correct location of the structure relative to the window and floor level, you will need to measure the following parameters:
- window opening dimensions;
- length to the bottom edge of the curtain;
- distance between fasteners.
For horizontal blinds mounted on sashes, you will need to additionally measure the dimensions of each glass. To the results obtained, add 2 cm to the upper and lower edges and 0.5 cm to the sides.
Installation of vertical blinds
Installing vertical blinds is actually not as difficult a process as it might seem at first, and anyone can handle this task. If the length of the curtain is small, then the installation is carried out inside the window opening. Otherwise, the structure is installed under the ceiling or on the wall.
The algorithm of actions here is as follows:
Installation of chains and lamellas. After attaching the cornice, there will be very little left - hang the slats, start the runners, and also attach the control chain. An important point: the lamellas must be hung in the same order in which they are in the box. Otherwise, you can ruin the entire drawing (if any).
Installation of horizontal blinds
Fixing horizontal blinds plastic windows somewhat more difficult. The main thing is to clearly follow the instructions:
- The first step is to fix the upper fasteners. This is done with a screwdriver. First, holes are prepared, after which the bracket is attached with screws.
- We hang the cornice. It should be fastened until it clicks.
- The holes for the lower mounts are drilled by hand. When choosing a diameter, one should take into account the dimensions of the thread retainer connecting the lamellas. Most often, horizontal blinds require additional openings on the sides. This helps to insert the latch connected to the lamella web into the corners.
When installing horizontal blinds yourself, you must carefully follow the instructions Important: self-assembly needs to be done with the utmost care. Very often, the slightest mistake turns into the fact that the whole structure functions incorrectly..
In the case of roller blinds, there are several mounting options at once, so before starting, you should choose the most convenient one. The first is mounting on self-tapping screws, which in essence is no different from the option described above, the second is on a special adhesive tape, which is used instead of self-tapping screws, and in the third, the roller blind is hung on the sash.
To fix roller blinds use brackets or adhesive tape Important: do not forget about the degreasing of plastic - it will help to significantly improve the adhesion of materials.
Interframe curtains
Interframe curtains are used only for double frames. The installation of this type of blinds is somewhat more complicated than the previous ones, and the process itself will result in an inevitable violation of the integrity of the profile: you will have to drill at least two holes through which the handle and cord to control the system will be pulled out.
The curtains themselves are mounted in the inner sash, more precisely - in its upper part, and the bracket - directly to the upper profile. Installation of the structure is in many ways similar to working with horizontal blinds.
Interframe curtains are installed in double-glazed windows Do-it-yourself installation of the system is carried out according to the following algorithm:
- The window frame is untwisted, and the blinds are applied to the inner sash. This is used to check if the dimensions match.
- Markings are made for fastening, as well as the points for the output of the cord and the control knob, after which holes with a diameter of about 5 mm are drilled.
- The brackets are inserted into the calipers, the cords and control knobs are brought out, and the cord is through the bottom hole.
- Interframe blinds are attached to the sash with special interframe brackets.
- An adapter is installed on the frame, and a control handle is connected to the flexible output.
- The lock of the control handle and cord is installed.
- The frame rolls back.
The blind control element is brought out through the frame As you can see, the technology for installing blinds on plastic windows without drilling is completely inappropriate here. The principle itself resembles the installation of all other design options, with the only difference being that you have to disassemble the frame, screw the bracket into the space between the frames, and display the controls through drilled holes .
In order for the blinds to be able to serve for many years, some operating rules should be observed:
- When buying, you should carefully check the complete set and all equipment, especially fasteners. They must be of high quality.
- The adjustment mechanism should be chosen wisely - it should be on the side convenient for operation.
- Make sure that no one opens the windows when the blinds have not yet been fully folded.
- The rotary knob must not interfere with or touch other fittings.
- Do not forget about periodic maintenance.
- Installing blinds on windows is quite possible and do-it-yourself, but it is better to entrust its repair to a professional.
- Plastic structures are preferable: it is much easier to care for them.
- Do not clean the system too often, this will only lead to rapid wear of the protective layer.
Installing the device with your own hands, as you can see, is a very simple matter, whether it be metal, plastic or wooden blinds on plastic windows. The main thing is to have high-quality instructions at hand. Thanks to this material, you can hang the blinds as quickly and efficiently as possible.
To save money, you can try to install blinds with your own hands. This work is not difficult, you just need to correctly mark the slope or frame, depending on where you need to fix the structure. You can use different ways to install such curtains, the choice is made on the basis of design features and dimensions.
Overview of types of curtains blinds
For different objects, the design of windows of a certain style and functionality is selected. Lamellas in the design can be arranged in different ways: vertically, horizontally.
Horizontal blinds
You can find different types of arrangement: pleated, inter-frame, attic, bamboo roller shutters, roll shutters belong to the same group. The main distinguishing feature is the horizontal slats. They can have different thicknesses, widths and function differently. Such structures can be attached to a slope, a frame, they are also installed on top of a window block or inside a frame. It all depends on the size of the windows and the preferences of the owner of the home.
Construction of horizontal models
Classical horizontal blinds can be safely installed in premises with a variety of purposes: offices, private housing, production sites, administrative, retail and educational facilities. This universal designs, which are found in various shades.
Vertical blinds
Such curtains are usually mounted on top of windows, which is due to structural features: vertically oriented slats, most often made of woven material. There are two main types of such structures: floor-length or window sill-length.
General form and arrangement of vertical models This is one of the reasons why it is customary to install such curtains in private houses, apartments and offices. Installation of blinds of this type is carried out on self-tapping screws. Exist Alternative option installation - to the ceiling surface.
Roller blinds
Blinds for windows in this design combine two types of curtains: classic fabric and horizontal plastic. They are equipped with a continuous sheet of various types of material, close the double-glazed window, and, if necessary, rise, folding into a roll.
Roller blind device Blinds of this type are fastened with self-tapping screws, as well as brackets. You can hang them in various interiors.
Mounting options
Horizontal and vertical curtains are characterized by individual design features. Based on this, developed different methods mounts:
Mount 1: For vertical structures
Fastening for vertical horizontal models to the wall Vertical blinds can be mounted under the ceiling or over windows. Such blinds cannot be installed on plastic windows without drilling.
Mount 2: On a horizontal view
Structures with horizontally oriented lamellas in standard version are attached directly to the window sashes, to the upper slope. Horizontal blinds without drilling can be placed in any design only on the sashes of the window block.
G - can be mounted in the window opening, on the ceiling, wall, on the sashes of plastic windows But the inter-frame analogue was created exclusively for installation in the space between the window frames. There are restrictions on installation to the upper slope, in particular, inter-frame and attic blinds are not attached in this way. If the installation is done by hand, be sure to consider design features products when the installation method is selected.
Preparation, measurements
Useful tools: screwdriver / screwdriver, tape measure, carpenter's pencil. In order for curtains to function as efficiently as possible, measurements must be taken correctly. The design should be symmetrical with respect to the double-glazed window.
If blinds without drilling are attached with adhesive tape, it is possible to correct errors. For analogues mounted on brackets and self-tapping screws, you need to markup as accurately as possible.
To fix vertical curtains, it is enough to measure the dimensions of the window opening, the distance between the attachment points and the length to the bottom edge of the curtain. This will allow you to correctly position the structure relative to the level of the floor and the window opening.
Horizontal blinds are often installed on the sashes, so the main measurements relate to the double-glazed window: height, width of each glass. To these values \u200b\u200badd 2 cm along the upper edge and bottom, 0.5 cm on the sides.
Installation of vertical blinds
Anyone can do the installation of such curtains with their own hands. If the blinds are short, they can be placed inside the window openings. Otherwise, the installation is carried out on the wall or under the ceiling.
For error-free fastening, a consistent instruction is given:
Step 1: Markup
The center point of the window opening is determined and correlated with the center of the blinds eaves. You need to make your own marks along the edges of the structure. The points for installing self-tapping screws are marked on both sides of the eaves closer to the center of the window block by about 5-6 mm.
Attach the cornice to the wall so that the center of the cornice coincides with the center of the window, and make marks along the edges. Step 2: Look at the level
At the same time, it is necessary to assess whether the lamellas are correctly positioned. Their lower part should be 1-2 cm above the floor level. The same amount must be retreated when installing short curtains (up to the windowsill).
Step 3: Mounting brackets
Dowels are installed in do-it-yourself holes prepared in advance. Brackets are fixed, this is done using self-tapping screws. Further, special clips are installed on these elements.
Be careful with the puncher when drilling for the bracket fasteners, otherwise part of the wall may break off. Step 4: Installation of slats and chains
A cornice is attached, into which it remains only to insert the runners and directly hang the vertical lamellas themselves on them. The final touch is the chain attachment.
The slats must be hung exactly in the order in which they are folded in the package. Otherwise, you can break the pattern of the blinds. Installation of horizontal
Guided by the markings made earlier, you can do the fastening of a horizontal structure with your own hands. There is an instruction for this:
- First you need to fix the upper fasteners. To do this, using a screwdriver, holes are prepared that will allow you to install the brackets using self-tapping screws.
- Next, you need to hang the cornice, it is fastened until it clicks.
- Holes for the lower fasteners (corners) are drilled taking into account the dimensions of the thread retainer connecting the lamellas. Typically, the design of blinds requires holes to be made on the sides of the glass. Then the latch, which is connected to the lamella web, can be easily inserted into the corners.
Do-it-yourself installation must be done with the utmost care, otherwise the blinds will not function correctly.
Methods for fastening roller blinds
When deciding how to install blinds on a window, the first task is to determine the appropriate method of fastening. The roll structure is mounted both on self-tapping screws and with the help of an adhesive (adhesive tape, liquid nails).
2 ways of fastening roller curtains on pvc window, on l-shaped brackets and on adhesive tape In the first case, the installation technology of vertical curtains is taken as a basis, since roller blinds suggest the need for fastening only in the upper part of the structure. To "plant" the structure on the adhesive, the surface of the windows is cleaned and degreased. This will improve the adhesion of materials.
This option is suitable for double frames. Interframe installation plastic curtain- a complex process and implies the need to violate the integrity of the frame profile: holes are drilled (2 pcs.) To output the blinds control system (handle and cord).
They should be located at the top of the inner sash. Brackets are installed on the upper profile, the technology for mounting horizontal blinds is taken as a basis.
Basic tips for choosing:
- Before you purchase a design, you need to clarify the composition of the kit, in particular, the presence of fasteners;
- If the installation is easy to do on your own, then it is better to entrust the repair of curtains to the master;
- Plastic is easier to care for;
- It is not recommended to clean too often new design, as this will lead to rapid abrasion of the protective coating.
Detailed instructions:Do-it-yourself step-by-step installation (photo)
For example, horizontal blinds can be positioned as inside in any convenient way. However, the most popular option is on top of the sash. The interframe structure is more difficult to install, and the vertical counterpart can only be located above the window or under the ceiling due to its large dimensions.
Good afternoon everyone!
Today I would like to talk about installing blinds on a plastic window. The opinion that window openings in residential premises should be covered with textile curtains is a thing of the past.
Blinds are diverse and functional so much that they will give odds to any curtains and tulle. Before buying a design certain color or size, you need to think about how it will be located on the window and how you can install it.
- vertical or horizontal slats,
- rolled or pleated,
- fabric or plastic - regardless of these indicators, blinds can be mounted using power tools and without it.
It is important to choose the location option:
- V window opening,
- over it
- or directly on the window sash.
Each of these cases should be considered separately.
Blinds are the most practical way to decorate windows. Easy to install and low maintenance blinds are very popular. Due to the variety of types and colors, they will harmoniously fit into any room and complement the interior of the room. In this article, we will consider the types of blinds and how to install them on windows. Learn how to install your own blinds different ways.
Kinds
IN construction stores eyes run up from a variety of colors and textures of window decor. How to choose the right blinds and install them correctly? First of all, let's figure out what types of blinds exist.
- Horizontal blinds. The most practical, close the window tightly and protect from light and prying eyes.
- Vertical blinds. Most often they are installed in offices or used to decorate blind windows, as they make it difficult to open windows.
- Roller blinds. Close the window very tightly. They can become an independent design of a window opening.
- Cassette blinds. They consist of a special box, which is installed on the frame. Do not prevent windows from opening.
How to choose
When choosing blinds, start from the functional purpose of the room and the general style of the room. Blinds can be fabric, plastic, aluminum, bamboo, etc.
The variety of colors and textures will allow you to choose the decor that suits your room. Be sure to measure your window before purchasing. This will allow you to choose the product of the appropriate size.
How to install blinds yourself
So, the blinds are bought. Do not rush to call the installation wizard. You can quite cope with this task yourself. In addition to acquiring a useful skill, installing blinds can be an interesting family pastime.
Blinds are installed in three ways:
- In the overlay. The product is attached at the top of the opening, and closes the entire window to the window sill or below.
- In the window opening. Blinds are mounted in the window opening closer to the window. Also close the entire window to the windowsill.
- For each sash separately. The most practical way. The blinds are attached directly to the sash, thereby allowing the sashes to be opened or the window to be ventilated without lifting the blinds.
Note!
When taking measurements, you need to make an allowance depending on the type of installation. If you are going to fasten the blinds overlay - add 10 cm to the width and height of the window opening. You will install blinds in the window opening - the height of the opening in its pure form, the width is minus 1.5 cm. When installing on each sash - the width of the sash is minus 2 cm, the height of the sash is minus 3 cm.
Each type of blinds has its own installation features. Next, we consider separately the principles of fastening products of each type.
Installing horizontal blinds
Usually, all necessary fastenings are included with horizontal blinds. Armed with a screwdriver, we proceed to the installation. They are installed in the window opening or on each sash separately.
- To fix the blinds to the window, measure the desired distance and mark the places where the top bar will be attached.
- Using a screwdriver, drill holes and attach corners that will hold top bar.
- Attach the plank to the corners. First on one, then on the second. You should hear a click when attaching.
- Dissolve the fixed canvas down, mark the points where the bottom bar will be attached.
- Install the bottom bar in the same way as the top bar using the corners.
Installation of vertical blinds
Vertical blinds consist of a cornice with clamps that regulate the sliding / sliding and slats - a canvas that closes the window.
Everything is included in the kit necessary elements fasteners, and detailed instructions by installation. This type of blinds is installed overlaid.
- Attach the cornice with clips to the ceiling. You can use the same screwdriver to fix the eaves.
- Insert the slats into the eaves. Each part of the canvas must be mounted separately. To do this, insert each strip into the corresponding latch, wait for a characteristic click.
Installing roller blinds
Roller blinds have the same mechanism as horizontal blinds and are installed in the same way. It is most convenient to mount roller blinds directly on the sash, then they will not interfere when opening windows. If you need to fix them in a window opening, it is better to use additional brackets, because the window handle protrudes several centimeters. Without brackets, the handle will stick out from under the canvas and spoil the overall look.
Installation of cassette blinds
Cassette-type blinds are a ready-made box with a mechanism that is mounted on window frame. Installation is quite simple.
- Attach the top bar to the canvas with screws.
- Then glue the side guides (usually on an adhesive basis) onto the sash vertically.
- Expand the canvas, adjust the borders of the upper and lower positions of the canvas.
- Install all accessories.
Helpful advice!
Blinds have a clear geometric shape, so carefully measure and calculate the attachment points to avoid asymmetry and unnecessary holes.
How to fix blinds on plastic windows
What to do if you need to fix the blinds to the sash, but you can’t drill plastic windows? In this case, you can install blinds using brackets. The devices are attached to the frame, and the supporting structure of the blinds is mounted on them. You can fix the bracket to the window frame using:
- double-sided tape;
- hook on the upper part of the frame of the opening sash.
This method will allow you to securely fix the product, and preserve the integrity of the metal-plastic profile.
To properly install blinds with your own hands, it is important:
- decide on the type of blinds you want to purchase;
- choose best option installations;
- take measurements of the window, take into account the necessary margin;
- when installing, strictly observe the dimensions of the product;
- carefully mark the drilling points;
- follow the instructions included in the kit.
How to take measurements
How to install blinds
Use dowels and screws that are appropriate for the fasteners and the material of the wall or ceiling to which the blinds will be attached.
Note!
Before installing fasteners, check if the folded blinds prevent the window from opening.
We advise you to carefully look for window handles, flower pots(and other “foreign” objects on the window sills) interfere with the opening and closing of the blinds and the rotation of the slats (window sill, radiators, etc.)
How to install horizontal blinds
- Measure the same distance from each edge of the window.
- Drill the wall and insert a dowel suitable for the wall material (concrete, plaster, etc.) into it, then screw the fixing with screws.
- Using a level and ruler, mark the location of the second fastener. Screw the second fastener in the same way as the first.
- When installing horizontal blinds, it is necessary to use an additional intermediate fixing if the width of the blinds exceeds a certain distance. To attach vertical blinds with a width of more than 1.6 m to the ceiling, you need to install 3 mounting brackets.
- Place an additional fastener 10 cm away from the control cord (this is where the louver mechanism experiences the most stress).
- Fasten blinds to mounts
Cutting horizontal blinds to width
- Lay the folded blinds on a horizontal surface and measure from each side the part that needs to be cut off. It is necessary to cut off equal parts of the blinds on the left and right.
- Cut off the cornice and rail. Be sure to cover the slats so as not to damage them.
Height cutting blinds:
- Remove the parts that are under the lower cornice at the bottom of the blinds in such a way as to release the cord.
- Untie the knots to free the slats.
- Remove excess slats to achieve the required blind height.
- Align the blinds by inserting the bottom curtain rod into the last link.
- Cut off the free ends of the cord, tie knots and put the lower cornice pieces in place.
Roller blind cutting
- Using a hacksaw, cut off the tube and bottom cornice.
- Cut the fabric with scissors. If a pattern is applied to the curtains, it is necessary to cut equal parts of the curtains on the left and right.
- Installation of roller blinds on the tube is carried out using double-sided adhesive tape located on it. (Be careful not to unfold the curtains all the way: always leave some fabric on the tube).
Cutting vertical blinds
Cutting the control rail of vertical blinds.
The slats are easy to cut and install. Cut the slats with scissors to the desired height, following the instructions on the package. Cut off the control rail with a hacksaw.
When choosing the material of the blinds, it is necessary to take into account in which room they will hang. For the bathroom and kitchen, plastic blinds are best suited - they are not afraid of moisture and are easy to clean. For the kitchen, you can also recommend aluminum blinds that do not support combustion.
source: leroymerlin.ru
Why are blinds needed?
Their main characteristics are: the ability to easily attach to windows, ease of use and excellent performance of their main function - regulating the light in the room. With constant work at the computer, it is also impossible to do without the use of blinds.
The only question in this case is to understand how you can hang blinds on plastic windows in order to get the most out of their use.
Step-by-step instructions for installing blinds
Determine the size
So, the first step is to buy blinds of the selected production, the appropriate size and others. individual characteristics. It should be noted that before going shopping, it is necessary to determine the size of the glass: taking into account this value, you need to know that the blinds must completely cover the glass (in width), slightly going to the limits of the frame.
Unpacking
After the purchase, the initial business is to unpack and untangle the cord, as well as to make out the fasteners.
From what is included in the package, dowels can be set aside, because in this case the blinds will be attached directly to the window.
Deciding on fasteners
We find a mount for which we will mount our blinds. The second step in installing the blinds is to find two metal brackets with latches. This will be required in order to subsequently fix the container with the "blinds" on them.
We make the markup and install the mounting brackets
The next step is markup. For its correct implementation, first of all, you must carefully read the instructions. After all, you need to place the mounting brackets in such a way that it is easy to insert a container into them.
In other words, you need to find the optimal distance from the end of the markup. An important point at this step, there is a complete exclusion of amateur performance: everything on the window should be drawn with a pencil according to the level, but not by eye.
Otherwise, the curvature of the fit will immediately catch your eye when the plates rise, and this does not look very aesthetically pleasing. It is also necessary to pay attention to the fact that the bars do not move outside the glass, since if there is a shift, the adjustment of the container will be violated.
Helpful advice!
Brackets must be fastened with latches upwards. However, before that, it is necessary to drill the window with a drill (thin), and then direct the screws towards the plastic.
If everything is done carefully, then nothing terrible will happen to the window, because the remaining drilled holes are removed using acrylic sealant. However, with the accuracy and caution of the execution of this step, they will not be at all.
We put on the container
Then the container is put on. We cover the latches and determine the correct fit. In the event that the brackets are firmly located on the window, and the container is easily removed or put on, it is required to say that the work was done perfectly. However, it is not yet fully completed.
The last thing left is to install the lower holders. Their role is to fix the web of slats and fasten it to protect it from free movement. When lifting, the lower edge of the web must be removed from the holders by hand.
Installing the bottom brackets
In order to mark the lower holders, you need to lower the canvas down. Then you need to estimate by eye their position in the case of a tightly stretched canvas.
With a dangling web, it is impossible to accurately measure the lower holders. After a correct measurement, it is imperative to drill holes and screw the holder with screws.
Mounting holders
On this stage the question begins to disturb: how should the holder be twisted - outward or inward?
The answer is quite simple: both when screwing in and out, the result remains the same, in any case, no screws remain visible. Therefore, here it is already required to rely on your convenience and principles.
This completed the process of attaching the blinds to the window.
Even 10-20 years ago there was no choice of window coverings - only massive curtains and curtains were hung on the windows. Progress does not stand still, and last years there are new types of window curtains. The most popular now are blinds. In apartments, you can often see a combination of blinds + Roman blinds and blinds + curtain. This method of curtaining protects housing from the sun, street noise and is able to decorate the window. Increasingly, instead of heavy curtains and curtains, compact roller blinds and blinds are used in everyday life. They are much better suited to metal-plastic window frames. They are used in both offices and residential areas.
Types of blinds
Designers bring to life a variety of solutions that have no analogues. There are the following types of blinds:
- plastic;
- wooden;
- fabric.
Installing blinds on a plastic window is a job that requires preparation. The installation process will depend on the type and shape of this product. Note that blinds are classified according to their shape:
- Horizontal.
- Vertical.
- Roll.
Horizontal are most suitable for living quarters. They do not take up space under the windows, they can be mounted both inside and outside the sash. Can be combined with curtains different sizes and styles.
Vertical blinds look best in office space. Their feature is that they can be mounted directly to the ceiling. They can visually increase the space, suitable for rooms with low ceilings.
Roller blinds have an extensive palette of colors that can decorate any room. Made of fabric, the easiest way to clean from dust and dirt. You can attach them in several ways.
In the CIS, most often you can find blinds made in China, Belarus and Russia in stores. Since the bulk of the population has plastic windows, especially in cities, it is necessary to study the information on how to properly mount them. Consider several options for how to attach them to the windows with your own hands, so as not to damage the window structures.
Standard installation of blinds on plastic windows
Blinds can be attached in a variety of ways. It can be:
- drilling installation;
- using double-sided tape;
- with the help of magnets;
- using brackets.
When buying, instructions are attached on how to hang blinds on plastic windows yourself. Basically advice is given on how to mount them by drilling windows. In this case, fastening is carried out to the window frame above the double-glazed window. You need to carefully study the instructions and carefully take measurements.
Blinds are installed in the following ways:
- in the opening of a plastic window;
- overlay;
- for each half of the window separately.
Important! Before buying blinds for two window halves, make sure that the lifting mechanism is on the left and right sides. Otherwise, cords from different halves will interfere with each other.
Mounting blinds on windows using drilling is not suitable if you plan to change the type of curtain. After drilling, traces will remain on the window profile, and this will be noticeable. Blinds are attached with screws, and on this moment this is the most reliable type of fastening.
Consider how to hang horizontal blinds on windows in more detail. The process can be divided into the following steps:
- We retreat 5-6 cm from both sides and outline the place for attaching the blinds. At this stage, you need to measure the distance very accurately, because with an error of even a couple of millimeters, your blinds will hang askew and will soon fail.
- We make holes for the brackets with a screwdriver, paying attention to whether the sash will open or not. If the window will open, then the hole is made in the upper part of the sash, if it is deaf, then on the outside.
- After inserting the blinds into the brackets, it is enough to snap them into place.
- On the side of the sash, you need to make a hole for the latch.
- Check how the mechanism works, whether it is convenient for you.
Vertical blinds are a little easier to install, you should do the following procedures:
- We make markings for the brackets, retreating 10 cm from the edge of the eaves.
- We drill holes and insert dowels into them. After that we fix the brackets.
- Fastenings together with lamellas are installed on the eaves.
- We assemble the runners, fasten them to the canvas, after that we fasten the weights in the lower part of the lamellae.
- You can check the operation of vertical blinds.
Brackets can be glued on double-sided tape if you do not want to spoil the window profile. If windows remain after drilling extra holes, they can always be removed with acrylic sealant.
If you purchased roller blinds, then you can use a different installation method to install them.
Alternative mounting types
It is not necessary to drill a window to attach the blind base. There are other options for attaching blinds to windows. To install roller blinds, you will need the following tools:
- Double-sided tape;
- liquid Nails;
- scissors;
- ruler or level.
Roller blinds are a smooth canvas that can be rolled up, raised, lowered using a special mechanism. Roller blinds do an excellent job of protecting against scorching sun rays, at the same time I decorate the living space Let's consider how to fix roller blinds on plastic windows. This type of curtains is hooked separately to each window sash. Roller blinds come in several types, and the method of fastening each type may vary.
The Mini roller system is a classic roller blind on a compact shaft. They can be easily installed on individual plastic window sashes. Fasteners are fixed without drilling, and thanks to this the frame remains intact. To prevent the fabric from sagging, the lower metal rail should be fixed with special magnetic holders. The sash can be opened in any way.
Cassette roller blinds are roller blinds that are assembled into a cornice that looks like a compact cassette. This type of curtain is suitable for flaps, plastic or aluminum. The most popular curtain options are Rollite and Uni systems. In models of these designs, strips for double-sided tape are provided. With the help of these strips, the guides are glued to the sash.
Cassette blinds are controlled by a single chain, which regulates the height of the curtain. A special retainer is installed on the window frame, which keeps the chain from sagging when the window is ventilated.
Isotra and Isolite systems are also popular. A plastic window with this type of blinds can be used in any mode without fear of breaking this system. Fastening is carried out on glazing beads, in which it will be necessary to make small holes. If these glazing beads are damaged, they can be quickly and easily replaced at any time.
Interestingly, the method of attaching blinds to the wall is still used. This type of installation does not harm the plastic window, you just need to make the right measurements.
Marking before installation
In the question of how to hang blinds on plastic windows, one of the main points is the correct measurements of the window and the design of the blinds. You need to take measurements before going to the store. The main thing is to keep the optimal distance along the edges of the markup, armed with a ruler with a pencil. And it’s even better to mark on the window itself with a pencil using a level; in this case, you don’t need to rely on your personal feelings and measure by eye. It is necessary to mark the fasteners symmetrically from all sides. When installed inside the window opening, our design should not reach 3 cm. When installed on top, the window should protrude at the edges no more than 5 cm. The height should be 3-4 cm more.
It happens that the mounting plates do not fit snugly to window profile. In this case, special linings are used, which, depending on the gap, are used in different quantities - from one to four pieces.
It is necessary to measure the height and width of the window along the light opening to the edge of the sealing rubber bands. Then measure the depth of the bead from the glass to the outer surface of the profile. It is necessary to take into account the presence of window fittings so that it does not interfere with the operation of the blinds. If you make the wrong measurements, then unnecessary sunlight will break through the cracks in the blinds.
The Holis and Magnum system is used to fasten horizontal plastic blinds.
Before installing blinds, you need to prepare window openings. They must be even and clean. Ideally, they should be degreased.
Remember, with the slightest mistake in measuring and installing fasteners, there is a big risk of spoiling both the windows and the structures themselves. Do-it-yourself installation of blinds should be treated with more care and attention, as this is a very painstaking work.
How to choose blinds
When choosing blinds for your apartment, you need to carefully select the material, color and texture in order to harmoniously fit this type of curtain into the living space. If you have a glazed balcony, then plastic or aluminum blinds will be the only right decision for balcony windows.
An important advantage of blinds is their compactness, heat and sound insulation. When using this type of curtains, your window sill is freed. You can save a lot on electricity consumption, as the blinds protect the living space from excess electricity. sunlight and warmth. In summer, the air conditioner will operate in a more economical mode. Now you can buy designs not only from plastic and aluminum, but from bamboo and wood.
Vertical blinds are often treated with special dust-repellent solutions. This design can be rolled up and washed in washing machine or hands.
Enough interesting view for decorating the interior with pleated curtains. Pleated blinds are made of pleated fabric and are attached directly to the window. Close such curtains with a cord.
The most refined and expensive look at wooden blinds. wooden plates do not rattle, have a natural structure, protect the room from light and do not heat up. They ennoble the room and fit into any interior, suitable for both offices and bedrooms. They are made from Canadian linden and cork varieties.
You can also choose multiimpressive blinds - a combination of plastic and fabric. Vertical plastic blinds are made curly, because of this, the entire room is filled with a variety of light reflections. They are like curtains made of airy fabrics.
A novelty on the market - photo-blinds. Any pattern is applied to the white slats, and when opening the blinds, you can admire a beautiful picture.
Japanese curtains are a combination of several fabric panels made of fabrics or plastic. They move along the eaves with different guides, they can move and move apart.
You can always change the outfit for your windows by buying new blinds - and you have a room updated without repair. Be careful when choosing the color of the curtains, paying attention to the colors of the furniture in the room.
A few years ago, curtains began to be replaced everywhere with blinds. Now they can be found in offices and living spaces, in trading floors and on the windows of cafes and restaurants.
Features of installing blinds
In order for the blinds to serve for a long time, one must be extremely careful when installing them. Only a balanced, competent approach will ensure the normal functioning of this rather complex design. But if you understand all the nuances, then you can install the blinds in place very quickly.
Helpful information:
The main thing is not to forget about the features of each design and take everything into account in the assembly. The installation process is influenced by the walls, namely how smooth they are. Any deviation from the correct level both horizontally and vertically will lead to significant complications during operation. Therefore, if in your case there are obvious curvature of the walls, it is better to invite a specialist with experience in solving such issues.
If, nevertheless, it is decided to install the blinds on your own, you need to study the available information, delve into all the details, be patient.
The main ways to install blinds
The choice of installation method should be guided by your preferences. Which method is right for you, you can decide, focusing on the design of the window. In principle, blinds are installed on any windows, including dormer windows, just the mounting method will have its own characteristics. The sequence of actions in any case will be similar. Installation methods differ from each other only in some small details.
Sequence of actions when installing blinds
Locking is the first step
First you need to correctly measure the window opening. Each type of installation has its own nuances that must be observed when measuring. This must be done in order to navigate the dimensions of the blinds and determine the appropriate design.
Advice! 2 cm are subtracted from the resulting dimensions of the window opening if it is decided to mount the blinds directly into the window opening. This technique allows you to accurately determine the required size, therefore, in the future you will not have to deal with the problem of too long blinds that rest against the window sill and bend ugly.
If you decide to mount the blinds with an overlap, you need to add 5 cm on each side in width so that the window is completely closed. The length will depend on your preferences or the advice of the designer. It can only be a little lower than the windowsill, or it can reach the floor. If it is planned to mount the blinds on each window sash separately, then these parts of the window must be measured without taking into account the fittings. When measuring, you must try to be punctual. Only the correct measurement and ideal geometric proportions will give an impeccable appearance and smooth functioning of the blinds in the future. If, during the measurement, the curvature of the window is revealed, the parameters should be tried to fit the correct figure.
Markup - step two
Before installation, mark the fasteners. Since the design of any blinds is geometrically verified, the markup must be accurate to the millimeter, symmetry is also of great importance. During the markup, you need to check how the light protection devices that you have prepared will work. Will it be possible to freely open and close the window after installing them. Having determined where the regulating cord will be, it is necessary to mark this place and make an additional fastening in this area. It is necessary because there will be more pressure on this area.
Installation - step three
Guided by the markings, it is necessary to attach all the available parts with the help of dowels, screws. They are screwed into the wall or into the ceiling. A cornice is hung on these screws. It is used to fix runners and lamellas, which are simply threaded into the prepared cornice. After completion of work, the functionality of the light protection device is checked.
Features of installing blinds on plastic windows
Quite often it is necessary to mount blinds on plastic windows. And it's not very easy. In this case, both the blinds themselves and the window can be rendered unusable quite quickly. To avoid unpleasant consequences All manipulations must be carried out with the utmost care.
The main subtleties that must be taken into account when working with different types blinds
Vertical blinds
The vertical version is the most popular. It is used in offices, public institutions and in the usual home environment. Color variations are endless, and the ability to combine colors and shapes gives scope for the most daring design ideas. To install vertical blinds, you need to prepare all the necessary elements:
- cornice;
- lamellas;
- runners;
- chain.
If the window has an unusual format, a chain of the appropriate length should be provided so that it looks appropriate and does not limit the functionality of the entire device. Vertical blinds can be mounted to the wall or ceiling. If you decide to mount the device on a wall, you can choose the area just above a window or right next to the ceiling. If you attach the cornice to the ceiling, then you need to choose a zone close to the wall surface at a distance slightly exceeding the width of the lamella.
When blinds are purchased right size, colors and qualities, mark out the fastening elements and mount them. When the brackets are installed, the eaves are attached to them. Runners are put on the eaves, lamellas are hung on them. When hanging the slats, you must follow the order in which they were in the package.
In the end, you should take care of the weights. This type of blinds cannot function without them. These weights are suspended at the bottom of the device on chains on both sides (inside and outside). All .
Video by m installation of vertical blinds
Horizontal blinds
This type of blinds has not lost its relevance for many years. Plastic devices are used everywhere, because they are so easy to match in color and size.
Their design features sometimes cause difficulties for beginners, and they cannot become this kind of window decoration.
Horizontal blinds are most often installed on the wall, sometimes they are attached directly to the window. They are mounted to the wall if it is necessary to complete the window opening. Fastening to the window implies mounting to the sashes, this option does not limit the functionality of the window itself. It can be easily opened and closed without any obstruction.
Self-installation of horizontal blinds includes the same steps as in the case of a vertical variety:
- froze;
- markup;
- fastening the eaves;
- blinds installation.
Before you drill a hole, you need to make sure that your markup is correct. For this, the fasteners are inserted into the eaves, pulled by the cord. To open the blinds all the way. Then they bring them to the intended place of attachment and visually assess whether the markings are applied correctly, whether the blinds will open evenly if they are mounted as planned. If there are distortions, it is necessary to apply more correct marks with a pencil. Then the brackets are removed from the cornice, brought to the marks and precisely put dots in the places where the self-tapping screw will be screwed.
Videos at installation of blinds on plastic windows
Advice! It is better to drill holes first, and then bring the part to this place and attach it. This method guarantees the preservation of the integrity of the plastic. After all, screwing a self-tapping screw through a fastener often ends in the appearance of cracks.
When the holes are ready, brackets are screwed to them and a cornice is hung. It is inserted into the mounts, and then they are closed. Next, perform the following actions:
- installation of a hook in the control mechanism;
- installation of a cane in a hook;
- the tip is attached to a cane;
- installation of a bell, fastening with a knot;
- blinds are lowered by a cord;
- installation of the lower fixation with a self-tapping screw.
In general, blinds are easy to install. However, you must comply with all requirements, be careful and accurate. You can not ignore the instructions that are included with the purchased blinds.
Video m installation of horizontal blinds
Installation of blinds without drilling
Some types of modern brackets can be mounted on the frame without drilling. It is very comfortable. Similar systems of blinds fasten on brackets by usual snapping. In this case, they are not only easy to attach, but also easy to remove to wash the window or tidy up the lamellas themselves. To attach brackets without drilling, you need to purchase a special variety of these fasteners. L-shaped brackets are needed, they can be easily hooked onto the top of the window sash. They can also be easily removed if necessary. But such a bracket cannot be fixed on a blind sash, this is possible only with opening sashes.
