We sew roller blinds with our own hands: step-by-step instructions and color selection for the living room. Do-it-yourself roller blinds: a simple master class Sew your own roller blinds

Roller blinds are suitable for connoisseurs simple forms, clear lines and laconic design. They perfectly cope with the main purpose of curtains - they close the window opening from sunlight and prying eyes, but at the same time they take up a minimum of space and do not overload the interior with an abundance of draperies, multilayer structures, ruffles, flounces, puffs and other decorative elements. In addition, you can create unique roller blinds with your own hands - step-by-step instructions are attached.

But before we tell you how to make roller blinds, let's get acquainted with the principle of their work. Like everything ingenious, the principle of their device is as simple as possible: a smooth fabric with a sewn-in weighting agent is hung on the window and, when the cord is pulled, it is simply wound onto the drum.

Advantages of roll structures:

Tightly close the window opening, excluding the possibility of looking into the room from the outside.
Can be mounted on a regular cornice, metal-plastic or wooden frame - in any case, such curtains take less space than standard curtains.
When mounted on a frame, they do not block access to fresh air when ventilating the room.
Suitable for any room and will be a great alternative to blinds, which many still consider to be an exclusively office decor element. Fabric curtains look more cozy and "home".
Can be used both separately and in combination with other textiles - curtains, drapes, lambrequins, tulle.
A huge selection of textiles and its colors allows you to find the best solution for any interior style.

Fabric roller blinds can be installed separately on each sash

roller blinds in various styles kitchen interior:

But such curtains also have their drawbacks. Unlike the same blinds, it will be possible to regulate the direction and intensity of light only by partial lifting or lowering - you can create a slight twilight only with the help of a special fabric with inserts of varying degrees of transparency. In addition, any textile absorbs odors and requires regular care- numerous washings, cleaning and ironing, especially when it comes to the kitchen. But the most significant drawback is the malfunctioning of the mechanism and frequent distortions of the fabric when opening / closing the window, so we will consider in detail how the roller blind mechanism should work.

Types of structures and device of the lifting mechanism

The main element of the roller blind is a rod with a round section, which gathers the fabric into a roll, and a decorative cord or chain, the tension of which drives the roller. The curtains are held in a straightened state with the help of a weighting agent, and when folded, they are fixed with garters or other decorative elements. Depending on the type of construction, the bar can simultaneously play the role of both a load and a roller, if placed below, or attached to a cornice or frame.

Although the principle of operation for all roller blinds is the same, their designs may vary. additional elements, the purpose of which is to improve the appearance or provide more comfortable operation. Perhaps the most practical addition is the use of special guides or magnetic tapes that eliminate distortions and gaps when curtains are working. The closed box also looks good, in which the roller with the fabric roll “hides” - in addition to the aesthetic function, it also protects textiles from various damage and accumulations of dust.

Curtains with a closed box are called cassette

The lifting mechanism control systems also differ:

Chain - adjustment of roller blinds is carried out manually using a conventional cord, rope or plastic chain thrown over the drum and fixed to the bottom edge of the canvas. When the cord is pulled, the roller starts to rotate, winding or straightening the curtain. But to hold the canvas, you must additionally use clips, garters or other holders. Despite the simplicity of the device, such a system is considered the most reliable and affordable.

Chain mechanism - simple and durable

Spring - the system is installed at the top or bottom of the curtain and closes quickly when the spring is straightened. In this case, the material is fixed automatically and does not require additional manipulations with the holders. True, the springs wear out quickly and require frequent replacement.

Fabric roller blinds with a spring mechanism can be installed both in the upper and lower parts of the window

Electric drive is the most expensive and difficult to operate system, but the easiest to operate. The canvas in such curtains is rolled up by the efforts of an electric motor, which can be started remotely or by clicking the switch button. This lifting mechanism is simply indispensable for large and high openings, on ceiling or roof windows.

Scheme of the device of electric curtains

The simplest mechanism for roller blinds with your own hands, you can make it from a round bar of wood or a metal rod, providing it with a cord or plastic chain, which can be purchased along with mounting hardware. But if you want more functional curtains - spring or electric, then you should buy a ready-made system and attach the material you like to it.

On a note! Roman blinds are also often called roller blinds. But this is not entirely correct. In the closed state, they are really similar, but when lifted, the rolled structures wind the fabric onto the shaft, and the “Roman” ones gather into horizontal folds.

Materials for practical curtains

Do roller blinds do-it-yourself can be made from wooden planks or thin bamboo planks. Such material does not fade in the sun, reliably protects from light and is resistant to mechanical damage. But it has two significant drawbacks: draft sound effects and impressive weight (even lightweight bamboo requires deep holes for reliable fixation of the structure - adhesive tape will not hold it for a long time). In addition, despite all the environmental friendliness and natural beauty of wood, such a variety color solutions like textiles, it cannot boast.

Therefore, the most popular materials for roller blinds are fabrics: polyester, linen, cotton and nylon. Combined canvases have proven themselves well - fiberglass, polyester with the addition of viscose, satin or cotton, "screen" (polyvinyl chloride with fiberglass). All these fabrics are quite practical, easy to wash and last a long time. You can choose any shade and ornaments, depending on the style and color scheme of the room design.

It is worth paying attention to the degree of transparency - thin fabrics that transmit light well are suitable for the living room, kitchen and office. But for a bedroom or nursery, it is better to give preference to thick curtains that will reliably protect sleep from the bright rays of the morning sun, the light of lanterns and the reflections of headlights at night.

Blackout curtains - best protection from bright light

Important! Please note that when the curtain is lowered, its wrong side is visible from the street. Therefore, it is worth choosing a double-sided fabric, or sewing two one-sided layers into one canvas.

Types of fabric roller blinds according to the degree of darkening of the room

Fabrics with light effects:

Transparent and translucent fabrics (cotton, satin, silk) - scatter the sun's rays well, but darken the room poorly, so for rest rooms it is advisable to combine them with thick curtains or curtains.

Transparent and translucent blinds will protect from prying eyes during daylight hours when the light is turned off in the room

"Blackout" - opaque textiles with full blackout are ideal for bedrooms, skylights or skylights, home theaters. Such curtains will provide perfect relaxation even on a sunny summer day.

"Blackout" - fabric with the effect of complete blackout

"Dimout" - delays the light by 70%, therefore it is considered a universal solution for the bedroom, living room and nursery. But for the kitchen, where it is important good lighting during the day and does not require complete blackout at night, it is better to choose a thinner fabric.

Dimout: medium shade

"Day-night" or "zebra" - this textile is created by alternating matte and transparent stripes, which allows you to adjust the degree of darkening in the room according to the principle of blinds.

Roller curtains made of fabric with a day-night effect

Important! Roller blinds in the kitchen can be made from fabric impregnated with special compounds that reduce the absorption of fat, odors and other cooking costs. For living rooms curtains with an antistatic effect, repelling dust and reflecting heat, are suitable. Such textiles help to create an air layer near the glass, which retains the cold in winter and the heat of sunlight in summer. But for impregnated fabrics, only dry cleaning is recommended.

In the kitchen, it is better to use fabrics with dirt-repellent impregnations.

Self-tailoring of curtains is a real saving when decorating a room, because on each window you can win about 2-3 thousand rubles (compared to ready-made models). Therefore, we will consider in detail how to make roller blinds with your own hands.

Correct measurements are the key to success

In order for the roller blinds to tightly close the window, it is important not only to carefully measure the parameters of the opening itself, but also to take into account the following nuances:

Decide on the area that the curtain should cover - it can be the entire opening, only glass or individual doors (the latter option is convenient for ventilation, but more laborious to implement).

Mounting options for roller blinds on the window

The length of the fabric cut is calculated as the sum of the height of the window (or opening), an allowance of 3-4 cm for processing sections and 15 cm for “pockets” for the rod and weighting agent.
For the width of the canvas, glass or frame measurements are taken plus an allowance of 3-4 cm (15-20 mm on each side) for bends.

Measurements for a curtain covering a window opening

Materials and tools for work

To make do-it-yourself roller blinds and assemble the structure practically from scratch, you will need the following set of tools and Supplies:

An aluminum rod, a piece of a cornice or a wooden beam with a circle section of 2.5-3 cm is the future roller on which the canvas will be wound. It is important that its length is approximately 1.5-2 cm less than the width of the fabric (seam allowance).
Mounting on a frame or window opening, for example, wooden lath with a pair of self-tapping metal corners for a regular frame or double-sided tape (option for a plastic window).
Sewing machine and threads.
A cut of the canvas according to the measurements taken.
"Velcro" or fluff tape along the length of the bar.
Plastic/metal rings and a decorative fastener (silk, satin ribbon or decorative cord) that is 3 times the length of the curtain.

On a note! The manufacturing process can always be simplified: buy a ready-made mechanism with a drum, brackets and a chain in hardware store and attach to it on a sticky tape a fabric processed in the studio according to your measurements (a special Velcro is already included with some rollers). So you can create unique design curtains according to your project with a minimum of labor costs.

Accessories for roller blinds

Step by step instructions for sewing curtains

After taking measurements and preparing everything necessary for work, you can begin to assemble the curtain itself. It is most convenient to engage in cutting and sewing on a flat and smooth surface- table top, wide ironing board or semi.

Roller blinds with your own hands - detailed master class:

The fabric is cut according to pre-made measurements. If this is a material with a one-sided pattern, you need to stitch two cuts with the right side to each other in length and on one side in width, then turn the resulting “pouch” and sew it up. If the canvas is double-sided, it is enough to process the edges, taking into account the allowance. After that, the fabric is steamed with an iron, Special attention giving corners.
At the bottom of the future curtain, you need to bast a "pocket", place a weighting agent in it and then sew it on a typewriter, closing it from all sides.

On a note! If the curtain material is not impregnated with any by special means and is not intended for dry cleaning, you should take care of how to remove the weight before washing. The easiest option is not to sew the “pocket” tightly, but close it on one side with a small zipper, buttons or hooks.

The wooden plank holder can be wrapped with a cloth, fixing it furniture stapler or thread with a needle. The second option is to simply glue one part of the fluff tape on the front side (the second must be sewn to the upper edge of the curtain).

On a note! If the manufacturing process homemade holder seems too long, you can always replace it with ready-made fasteners and a cornice pipe on which the fabric is put on.

Hooks are screwed into the wooden plank, to which a ribbon or decorative cord is tied. The latch is pulled along the length of the fabric, removed through the rings sewn to the top of the curtain, and fixed to a hook screwed into the wall. When pulling the cord, the curtain will wrap on the roller.

Curtain with decorative cord

Important! To make the fabric easy to roll, the rings should be hung at a distance of 15-20 cm from the sides and 5-7 cm from the rod. For this, 2 narrow strips of fabric are used, which are sewn to the top of the curtain. Another option is to do through holes in the fabric itself and close them with decorative eyelets. In this case, you can use two ribbons instead of a long cord, tying them into beautiful bows.

Now you need to hang the holder on the window. To do this, attach a plank wrapped in fabric to a frame, glass or window opening. To mark the attachment point, it is advisable to use a level so as not to spoil the appearance of the structure. IN wooden frame holes are drilled for self-tapping screws or corners are attached; for metal-plastic windows, you can use double-sided tape or special plastic fasteners.

Mounting roller blinds on plastic windows

It remains to combine the two parts of the fluff tape and hang the fabric with the weighting agent on the decorative bar.

On a note! If the roller blind unfolds unevenly, replace the lower bar with a heavier one.

Video manual for the manufacture of fabric roller blinds

To make hand-made roller blinds harmoniously fit into the interior of the room, use the recommendations of designers.

For rooms facing south or east, fabrics from a cold range are ideal. Emerald, turquoise, purple, ash pink will bring a little coolness and scatter blinding light. But the windows on the north and west sides are better to decorate with curtains of warm shades.

Cold and warm colors

It is desirable that the color of the fabric be either darker or much lighter than the walls, otherwise the curtains will be “lost” against the background of the decoration.

Bright curtains will be an excellent accent element

When choosing an ornament, you should not copy a pattern already present in the interior - choose a similar one in shape or color. But if the pattern is applied to the entire surface of the walls, it is better to choose curtains in monochrome, but in one color scheme with decoration or other interior elements.

Spectacular striped curtain pattern "Day-Night"

Although the design of roller blinds is quite concise, it can be diversified with the help of various decorative elements, such as lace, flounces, fringe, playful bows, metal chain. Even a weighting rod can be an interesting accent for window decoration.

Forged bar as a weighting agent

For living rooms, you can use various combinations, combining roller blinds with both thick curtains and transparent organza curtains, veils. And you can limit yourself to a spectacular lambrequin - it all depends on the interior style and your personal preferences.

An interesting ensemble of roller blinds and curtains:

If you want to turn a window into an original picture, then remember the photo printing technique - with its help you can apply any pattern to the fabric.

Fabrics with photo printing will be the highlight of the interior of any room

Roller blinds - perfect solution For modern interior. We hope that our advice helped you not only decide on the color and model of the lifting mechanism, but also inspired you to create with your own hands. If self-tailoring does not appeal to you, you can always buy a finished model or order your favorite curtain design from the masters.

Roller blinds conquered consumers with their practicality and decorative effect. This type of curtains is a universal protection against the penetration of sunlight into the room. Designers use roller blinds as one of the interior decoration techniques. When buying this type of curtains, you can be surprised and not at all happy about their expensive cost. However, it is worth noting that a do-it-yourself roller blind will look no worse than a purchased one. Curtains can be made from various materials: paper, fabric, etc.

Today, many owners of houses and apartments prefer to decorate the interior simply but tastefully. It is for this purpose that roller blinds can be hung in the room. They won't take up much space right choice colors and textures will perfectly fit into the overall interior. It is convenient to look after such curtains, they are very practical and easy to use.

Very often, the reason for self-manufacturing roller blinds is not their high cost, but the desire to make something unique and unrepeatable.

In specialized stores you can find a wide variety of materials, their textures and colors. It is necessary to select material for curtains taking into account the general style in the interior. Before making your own curtains, you must carefully read the instructions.

Step-by-step production of roller blinds:

Fold the fabric in half lengthwise and sew the sides together. The workpiece must be turned out to close the last seam.
To position the top bar, you need to sew a pocket into which you need to thread the bar. This bar will be attached to the window frame. Some prefer to attach the fabric to the bar with a stapler, after wrapping the fabric around the bar.
At the bottom of the curtain I sew a pocket into which a weighting rail is inserted.
Braid or tape must be thrown over the top bar. It must necessarily hang lower than the finished structure.
Tape with a stapler attached to top bar. When the curtains are raised, make sure that the tape wraps tightly around the bottom rail. Then it is fixed at a convenient height.

Making roller blinds does not take much time and money. Some housewives make several options at once in order to be able to replace the curtains if they need to be cleaned or just refresh the interior. Roller blinds look great in the interior, if the texture and color of the material is chosen correctly.

Do-it-yourself roller blinds: a master class with a photo

When choosing curtains for windows, many may be faced with ignorance of the differences between Roman and roller blinds, which, if made independently, can lead to errors. These two types of curtains have some similarities in appearance, but the mechanisms of their work are radically different. Roman blinds are adjustable with cords located on the back of the product.

Roller blinds are adjusted using a specially designed rod, which is located at the top of the window opening.

If roller blinds are made independently, they begin to be twisted from below, fixing with garter tapes, which are placed at a sufficient distance. The production of the roll begins only after careful measurements of the window opening. The width of the curtains should be made larger by 2-4 cm, since future allowances should be taken into account.

Required tools:

Prepare two sheets of fabric, having previously found out the required size. The canvases can be the same or different. The main thing is that they must be in harmony.
You need to choose the texture of the fabric, prepare ribbons or purchase decorative cords. Their dimensions should be twice the length of the curtains with an allowance of 30 or 40 cm.
For fasteners, a wooden beam should be prepared. Instead of a beam, you can use a metal pipe, but it will require additional fasteners.
To weight the curtains, you need to get a wooden or metal rod.

For mounting wooden beam you will need a screwdriver and, accordingly, screws. Also be sure to have a variety of sewing accessories. To attach the fabric to the beam, many use a stapler and paper clips.

How to make your own roller blinds

Perhaps, the manufacture of roller blinds can be called one of the fastest and easiest. Before designing and tailoring, it is important to pay attention to the overall style in the interior. The choice of fabric for curtains should be deliberate. Curtains should be in harmony with the decoration or upholstery of the furniture.

It is interesting that many people use roller blinds as additional ones, without refusing to decorate the window opening with traditional curtains.

You should also pay attention to this - roller blinds should not stand out too much. The materials must also be sufficiently dense. It is better to choose fabric colors that will not get dirty quickly.

Step-by-step instruction:

Lay out the fabric, then sew from the inside out. The bag that turns out should be turned out.
If a pocket is used for weighting, then the remaining gap in the fabric is sewn. If the weighting agent is inserted into the bag, then the gap is left intact.
After sewing up the gap, they start sewing on the pocket, into which, after a good ironing, a weighting agent is inserted.
If the weighting agent is inserted into the bag itself, the curtain is sewn, stepping back from the weighting agent by half a centimeter. The gap is sewn up.
The fabric is ironed and wrapped around the beam. The fabric is attached to it with a stapler.
Using metal pipe the fabric is sewn.
Garters are thrown over the upper fasteners and fixed with paper clips or threads.
The beam is attached to the opening through the lower part.

Some decorate the upper part of the roller blinds, but this is already a matter of taste. If hooks or a zipper are used instead of a stapler, then in the future the canvas can be easily replaced. If the curtains will be attached to a plastic window, then high-quality double-sided adhesive tape can be used for easy fastening.

Roller blinds are good because they can be updated at any time. Roller blinds can be improved using a dense fabric texture. Updated curtains will not only be practical, but will also enliven the interior, make it original and spectacular. Before proceeding with the update, it is necessary to re-measure the window opening.

A fabric is glued to the roller blind with glue. It is necessary to ensure that there is not too much glue, and that it does not leave streaks.

When gluing the fabric, you need to act very carefully. It needs to be smoothed so that it does not lie in ugly folds. The fabric must be glued gradually, step by step, starting from the bottom and ending with the top.

Sequencing:

Measure opening;
Cut out the curtain and fabric;
Glue the fabric to the curtain with glue.

The fabric needs to be wrapped on the wrong side so that the canvas looks beautiful. To make the hem stick well, you can put something heavy on them, such as books. With updated curtains, window openings will look stylish and fashionable.

Do-it-yourself roller blind fastening: step by step instructions (video)

Roller blinds - modern look decoration window openings. They have a lot of advantages. In stores, their cost often seems exaggerated, because you can make such a design yourself. Old curtains can be easily updated with a new piece of fabric. A description of how to make roller blinds can be found on the Internet.

Do-it-yourself roller blind design: step by step instructions (photo)

First of all, let's look at the question of what it is - roller blinds. What are their advantages and disadvantages. Roller blinds are different type designs to limit penetrating light. They can consist of a different number of elements and materials. Be sure to have a mechanism for lowering and lifting. Installation and operation of roller blinds is very simple.

Designers often include them in their projects due to the high variety of colors and textures. Also, roller blinds are ideal for plastic windows, which gives them an advantage in modern urban interiors.

Pros and cons of operation

The advantages of roller blinds are: a large selection of materials and textures, suitable for any style and room, including rooms with high humidity. They are easy in daily use due to the mechanical component.

In addition, this approach saves space - the window sill remains free. Also, a special approach to insolation of the room helps to save on expensive curtain fabric.

The mechanism is ideal when installing the system " Smart House» - roller blinds can be installed on the electric control. Great advantage - easy independent installation. To maintain health and order, there are special solutions and impregnations of materials.

Also, the advantages include a huge variety of manufacturers of this product. Nowadays, the competition is very high: in addition to going to the store, you can use your own hands to create roller blinds or order them in an online store according to the sizes and components you need.

Besides maximum size canvases up to 3 meters is already a minus, since the height of the window also matters, the more material is used, the harder job the mechanism itself. If the width of the window does not allow closing it with one sheet, gaps are inevitable. From constant friction, low wear-resistant, cheap materials quickly fail.

Step-by-step instructions for creating a fabric roller blind

A great option for window decoration - do-it-yourself roller blinds. Easy replacement fabric base disposes to numerous variations of the transformation of the interior. Even more interesting is that you rely solely on your imagination.

We propose to consider three options for creating curtains on your own: with a rod - a shaft made of wood, with a roller located along the lower edge of the curtains and making roller blinds from ready-made industrial parts.

Before starting work, it is better to wet and dry the fabric, decorate and stitch it so that it does not deform in the course of work. The width of the fabric is selected according to the width of the opening, plus or minus the allowances.

It is enough just to take the necessary footage of fabric for alteration: its length will be equal to the height of the window opening with the addition of 30 cm to hide the fastening, the width is selected according to the width of the window. The fabric can take twice as much, in the case of a one-sided print - two window widths plus a few centimeters for allowances.

The first option - with a bar with a bar shaft

A very easy-to-make method, we need: fabric, a pair of bars (shaft and weight), garters, centimeter tape, screws (hooks and rings), cutting tools. A detailed photos An example roller blind can be found on the Internet.

The sequence of actions is as follows. Pre-purchased according to calculations and accurate measurements, it is better to wash and iron the fabric before starting work. We sew from the wrong side in width and on both sides of the length of the curtain, so we get a bag, which we then turn out.

Gently stitch the raw edge, iron. We sew pockets by bending three centimeters to the edge from above, one and a half from below. The planks will then go there.

Kitchen Roller Blinds: Types, Sizes, Prices, Installation (Photos) regarding DIY Roller Blind - Goosengz

We screw two rings on the screws from the inside of the curtain. We retreat 6 cm on the front of the product and screw in another screw with ring fastening. We take the prepared garters, one of the elements is equal to the length of the curtain, multiplied by three, the second is three and a half lengths.

We tie the fasteners with rings, fasten the long garter on the fastener that was screwed in with the last one. We carry them along the inside out again, pass through the screw rings. We bring out through the side loop, tie. Our roller blind is ready!

To hang it, we screw more hooks screws into window frame opposite the hooks already on the curtain. Now you can hang the curtain! And for winding the cord, we use another hook. The whole job takes a couple of hours!

The second option is a roller at the bottom of the roller blind

We process the fabric on both sides. We form a pocket for the weighting agent at the bottom of the canvas. If the fabric is not double-sided, then we sew a bag according to the previous sample and iron it. The weighting agent will serve as a shaft mechanism.

If the fabric is printed on one side, then we sew the bag, turn it inside out and iron it. We hide the bar in the lower edge of the curtain. For a couple of millimeters we spend the upper edge with a fold to the inside. Next, we work with Velcro / adhesive tape.

We sew one part of the fastening element to the curtain, we fasten the second to the bar near the stream with a stapler. We wrap the bar with a cloth, attaching a canvas to it. We make ties 25 cm plus a length equal to the height of the window multiplied by two.

We fasten the ties at the top bar with the same tool, symmetrically about the center of the product and in half relative to the total length. Fix the upper bar with a screwdriver and self-tapping screws.

The third option is creation with a base in the form of a finished structure

It happens that it is not possible to choose the curtains according to your desire or the materials you need are not available. Then your imagination comes into play, you can easily change the finished product to choose the right pattern or ornament.

For alteration, natural fabrics are more often chosen: cotton, rattan, possibly canvas. You need to be careful when attaching the web, a lot depends on how the winding will take place.

Then we take out the weighting agent from the cylinder, remove the original canvas. We add 2-3 cm to the length of the roll and get the value A. To get the value B, we take a value equal to the distance from the mount to the window sill plus 2-3 cm. with the help of an iron, we build.

We make a pocket along the bottom edge of the curtain, the weighting agent will be hidden there. We also bend one and a half cm, then five cm. We attach the curtain to the mechanism on a layer of glue, you can use double-sided tape.

With even fixation, the curtain rolls up and unwinds without problems. We place the curtain in the finished mechanism, insert the weighting agent, the curtain is ready!

It is perhaps really difficult to make only a kind of day-night roller blinds, since in their functionality there are two canvases that shift relative to each other when twisted. The idea of such curtains allows for insolation through strips of translucent fabric, but on the technical side, when reworking, this is quite difficult to implement.

Roller blind maintenance

Making or choosing roller blinds is only the beginning of their service. Fortunately, there are a great many examples and photographs of roller shutters on the Internet. It is also important to properly handle and care for them. However, it is very easy!

If necessary, cleaning the installation mechanism is removed, in almost any model. Thus, the structure is disassembled and perfectly cleaned.

If necessary, on the weighting agent, the fabric can be steamed to make it easier to remove. Then, according to the recommendations for a certain type of canvas, the fabric is cleaned, washed, ironed and placed back on the window frame. Roller blinds are unpretentious and always pleasing to the eye.

DIY roller blind photo

Due to the ergonomics and diverse design, roller blinds or, as they are also called roller blinds and roller blinds, are only becoming more popular every year. The production of roller shutters today is very profitable and the market does not lack their range, but to create your own unique interior You can only add elements to it self made, for example, make roller blinds on plastic windows with your own hands. Of course, they will resemble the roller blinds offered to us on the market, only lifting structure and conciseness, but will inevitably become the highlight of the whole decor in the room.

Sewing such curtains does not require large financial costs and time, and even a novice craftswoman will be able to cope with it.

The choice of textiles for the manufacture of roller blinds with your own hands according to the step-by-step instructions offered below is not limited by anything. On sale you can find fabrics designed specifically for window curtains of this type: thick and transparent, plain and printed, smooth and embossed, as well as new-generation blackout and screen opaque materials that provide complete shading in the room. They are ideal for the bedroom, and if you plan to update the curtains in the bathroom, give preference to water-repellent fabric. Before sewing roller blinds from such materials, do not forget to study the recommendations for caring for them: is washing acceptable, if so, at what temperature, etc.

If you wish, you can also make roller shutters yourself from ordinary curtain or cotton fabrics. They do not have high antistatic and dirt-repellent properties, but they are much cheaper. Moreover, the master class that we offer does not oblige you to choose only special materials for roller shutters. For curtains made according to it step by step, you can choose any textile fabric suitable for the realization of your design ideas: curtain fabric, satin, chintz, poplin, linen, cotton. The main condition is that the fabrics for the front and back sides must be of the same texture and not shed. Otherwise, when washing, they will shrink differently, the curtain will warp and lose its attractiveness.

How to make roller blinds with your own hands in a couple of hours: step by step instructions

To make roller blinds with your own hands, you need minimal amount fabrics and at the same time it turns out a beautiful stylish and most functional product. Such a curtain can close not only the window, but also glass door or use as an original door for a small cabinet.

In order to sew roller blinds with our own hands, we need:

sewing machine;
two pieces of the same type, but different in design fabric;
two wooden bars about 2 and 1 cm wide and equal to the width of the finished curtain;
five ring screws.;
three screws-hooks;
screwdriver;
cord, braid or tape for raising and lowering the curtains;
scissors, centimeter, thread, pencil.

Our roller blind will be mounted on window opening. When unfolded, it should extend 10-12 cm beyond its borders in width, and go down to the window sill in length. Based on this, we make measurements. To the results obtained, we add 3 cm to the width for allowances for the side seams and 10 cm to the length, given that we will fix the curtain at a height of 7 cm above the window.

If the roller blind is installed above the upper slope of the window opening, its size must be wider than the opening by at least 10 cm or more.

As an example, take a standard window opening 146 cm wide and 140 cm high. So you need to cut out two rectangular pieces of fabric (since you plan to sew a double curtain) 149 wide and at least 150 cm long or more. By the way, if the width of the fabric is 150 cm, it is not necessary to cut the roller blind to this extra centimeter. Just cut out a square 150x150cm. If the width of the fabric you like is less than one and a half meters, you will have to sew a curtain of 4 cuts (2 for the front side and 2 for the wrong side), and decorate the central seams with decorative tape or braid.

Step 1: Sew the Curtain

We combine the pieces of matter with the front sides and sew them from the sides and from above, stepping back from the edges by 1.5 cm. Leave the bottom edge unstitched. We turn the product on the front side, bend the bottom edge inward by 1.5 cm, sew and iron well what happened on both sides.
Now we need to sew "pockets" for the weighting and mounting straps. To do this, we decide which side of the curtain will be front (looking into the room), and which side and lay it out on a flat surface wrong side up. Then we bend the top edge by 3 cm, the bottom by 1.5 cm, sew and insert the strips: the one that is wider in the top pocket, and the one that is already in the bottom one.

Step 2: Screw in the ring screws

We screw ring screws into the upper (fixing) bar at a distance of 10 cm from the edges through the fabric (two above and two below them on the front side). We also screw the fifth screw from the front side, from one edge, stepping back from it at a distance of 5 cm.

Step 3: Attaching the Lift Cords

To roll the roller blind, you need cords. What they will be depends only on your imagination: an ordinary cord, nylon ribbon, decorative braid, a ribbon made of fabric in a color contrasting to the curtains. Before cutting them desired length we make simple calculations. The length of the first cord is three times the length of the curtain. The length of the second cord is exactly the same plus half the length of the curtain. In our case, it will be 450 cm and 525 cm.

We pass both cords into the screw rings on the top bar and fasten as shown in the figure. In this case, a cord that has a longer length must be tied to a ring located further from a separate, fifth side screw.

Step 4: The curtain and the original lifting mechanism are ready

We lower both cords along the wrong side of our curtains, wind them through the bottom to the front side, pass through all three rings screwed on it and tie them together.

Step 5: Installing the Curtain on the Window

Before you hang our wonderful curtain, you need to screw two screw hooks over the window opening. The main thing is to screw them in so that they are located exactly opposite the upper rings fixed on the mounting plate. The same principle can be used to make not only curtains, but also blinds with your own hands.

To do this, we apply the curtain to the opening above the window and mark with a pencil the places where the hook-screws should be, screw them in and hang the curtain. On the side of the window, it is desirable to screw in another hook, for which it will be convenient to throw the cords when the curtain is raised, thereby preventing them from tangling.

Ideas with photos for inspiration

Our master class on how to do it yourself is just a guide to action. With it, you can sew curtains completely different from the previous ones. They will differ in size, design, type of lifting cords. Changing them according to mood, weather, season, you can easily and simply transform the interior every time.

Curtains Hand Made bring the warmth of human hands and a sense of comfort and tranquility into the interior.

You can fasten such curtains not only on a bar, but also on a cornice using ordinary cornice stakes, and if the width of the fabric does not allow you to sew not one wide, but several narrow curtains

Such curtains can be installed not only on the opening, but also on each sash

or in a window opening. In this case, you will have to take into account that it will be possible to open the window only when the curtain is raised to the very top.

or turn on your imagination and come up with your own original mount

As lifting cords, you can use ordinary nylon tape

Instead of screw rings, ordinary plastic rings threaded through the ribbons are sometimes used to support lifting cords.

If the window is small, you can do without a lifting mechanism, and roll up the curtain fabric manually and fix it with one tape in the center

Every housewife can create a cozy and unique atmosphere in her house or apartment. The main thing that is needed for this is the desire to create, imagination and a sense of proportion. And you can start with the simplest - change ready-made curtains on handmade and on their own design.

Reading 9 min.

Roller blinds are very popular today, when decorating windows, which combine functionality and ease of use, have a low cost and stylish appearance. Due to their simplicity, they can easily be made independently, which we will tell you about in this article.

Differences between roller blinds and Roman blinds

In my own way appearance Roman blinds are almost indistinguishable from roller blinds. The difference is only in the mechanism for lifting the canvas. In Roman blinds, the canvas is folded, and the roller blinds are twisted and fixed with garter ribbons. Such an opening mechanism - with twisting and fixing with garters, is distinguished by its simplicity and reliability of design.

Roman blinds are folded

Benefits of roller blinds

The popularity of roller blinds is due to their many advantages. Of these, the following can be distinguished:

It is possible to use such roller blinds as an independent element of window decoration or as an addition to the curtains used. This significantly expands the scope for creativity, which allows you to realize your most daring design ideas, decorating the room to your liking.
Roller blinds due to their functionality, simplicity of design and attractive appearance today have almost completely replaced blinds that were popular in the past. This design is ideal for plastic windows, and due to its versatility, it can be used in classic and modern interior design styles.
It is possible to use roller blinds with plastic double-glazed windows And wooden windows. It is possible to qualitatively design windows, regardless of their material, shape and design.
Properly sized and well-installed roller blinds will fit snugly against the windows, which solves the problem of the curious glances of passers-by. In particular, such roller blinds will be relevant for owners of private cottages and residents of the first floors of high-rise buildings.
The design of the curtains allows you to completely darken the room or reduce the intensity of the illumination of the bright sun. It is possible to choose a canvas with different light transmission characteristics, which will solve the problem with lighting the room during daylight hours.
Such designs are distinguished by durability, quality and wear resistance.
Throughout the entire period of operation, such roller blinds retain all their functionality.
The available variety of options allows you to choose them both for the features of specific windows, and for the style of decorating the room.
Maybe independent production such roller blinds, which allows you to save on window decoration.

Independent production of roller blinds

To do this job you will need the following materials and fixture:

two pieces of fabric;
two wooden beams;
hooks-screws - three pieces;
ring screws - five pieces;
sewing accessories and decorative cord.

Choosing the required material

The quality of self-made roller blinds depends largely on how correctly the fabric is selected for their manufacture. Preference in this case is recommended to give durable materials, which have antibacterial, antistatic and dirt-repellent impregnations. Made from quality material The roller blind will be attractive and easy to care for. If in the recent past natural fabrics were the most popular, today high-quality synthetics have appeared, which are environmentally friendly and in no way inferior to natural fabrics in their material performance and appearance. At the same time, synthetic fabrics are resistant to fading in the sun, they are easy to care for and are distinguished by the strength of the material.

When choosing a fabric, you need to take into account the manufacturer's recommendations for the operation of such a fabric. You should find out if it can be washed and if dry cleaning is possible in the future. Bright colors tend to fade in the sun, so this rolled fabric should be made double-sided, and the outer side is made of durable and UV-resistant material.