Unusual cloud lamp with your own hands. Glowing cloud with your own hands. You will need a led lamp and a wish

As was well noted in one well-known hit, the most important thing is the weather in the house. And also comfort. You will have to try hard with the weather, but nice interior details will always help to create a cozy atmosphere. For example, one look at this cute lamp-cloud enough to dispel the clouds of bad mood for the whole day. And the best part is its not hard at all do it yourself.

If you are looking for a budget-friendly yet effective way to decorate a nursery, prepare a house for a holiday, or even make a set for a performance, arm yourself with a good mood, a couple of hours of free time and let's make a magical cloud lamp.

For magic you will need:
One or more paper Chinese lanterns (depending on the desired shape and size of the "cloud");
Cotton wool, batting or synthetic winterizer for "fluffiness";
A battery-powered LED light bulb or an inexpensive night light;
Glue gun;
Line for fastening.

Step 1

Apply glue to a small segment of the ball and immediately press a piece of cotton wool or padding polyester to it. This should be done as quickly as possible while the glue is hot. Press down for a few seconds.

Step 2

Segment by segment, cover the entire flashlight with a thick layer of cotton wool. This is the longest stage of creating a "cloud".

Step 3

To make the ball more cloudy, apply a second-third-any required amount layers of cotton wool or synthetic winterizer. Glue large pieces of filler to each other in a chaotic manner to make the cloud more shaggy. And do not forget to leave the hole for the light bulb unglued.

Step 4

When the shape and volume of the cloud suits you completely, insert an LED light bulb or a battery-powered nightlight into the middle of the paper lantern. This will be the source of soft unobtrusive lighting.

Step 5

Don't forget to attach the fishing line if you plan to hang the lamp.

Cloud is ready!

And in this video famous DIY blogger and jack of all trades Tiffy Quake will show you how to make another version of the cloud lamp. Tiffy uses some paper lanterns different sizes , and as a light source - garland.

A creative lamp will surely delight all households without punching a hole in the family budget. What can not be said about its prototype - which will cost lovers of originality a tidy sum.

A night light is not just a source of illumination, but also an important element of decor. During the day, it can be almost invisible, but at night, when all other lighting fixtures go out, it is the night light that comes to the fore. And if this is not just a light bulb under the ceiling, but something more inventive, then the night room takes on a special solemn atmosphere. With a little effort, you can make a spectacular and stylish night light with your own hands. Its shape and features will be limited only by the imagination of the creator.

Why is it needed

To shine at night is the most obvious answer to this question. But far from the only one! Good night light performs whole line useful features:

• creates a pleasant and unusual atmosphere before going to bed;
• saves electricity - a light bulb in a night lamp consumes many times less electricity than a chandelier;
• decorates the interior of the room;
• eliminates the need to turn on the main light and wake up the household if you need to get up in the middle of the night;
• allows you to install a light bulb of any color and even create curly lighting.

In addition, a night light in a child's bedroom is reliable means to fight the fear of the dark. If the ceiling is decorated with patterns and drawings, then the light from such a night lamp will have a beneficial effect on the child's imagination. Any psychologist will confirm that the visual effects observed by the baby are an important and useful element.

Ideas

There are many good ideas for homemade nightlights. They differ in the degree of complexity of manufacture, but most of them can be handled by anyone.

Wall

You can cut out the name of the person in whose room the night light will be placed

There are countless options for making a wall lamp. It can have any shape, consist of any materials. Here is one of the simple and at the same time spectacular looking options. To create it, you will need some boards, an acrylic sheet and an LED strip of any color:

1. Take 2 boards of the same size. The thickness should be small - so it will be easier to work with them. Process the material sandpaper or in any other way to give a presentable look.
2. Cut out a rectangle of acrylic the same size as the planks.
3. Take one of the boards and draw a pattern or an inscription on it.
4. Cut out the pattern or inscription so that it becomes transparent. If there is no CNC machine at hand, this can be done conventional drill or a jigsaw. Light from the night lamp will pass through these holes.
5. Make 4 corner bolt holes in each of the boards and in the acrylic sheet. In an empty plank, also create a hole for the cord from the LED strip.
6. Cut a groove on the acrylic sheet a little wider than the LED strip. The strip should be at the bottom of the workpiece and go along. Place the tape in the groove.
7. Assemble the night light with the bolts.

The lighting device can be screwed to the wall with the same bolts with which it is assembled, or it can be glued or carefully hung on a nail.

Plexiglas

Plexiglas is made from acrylic resin and is widely known under the names plexiglass, acriplast, acrylight

Organic glass and acrylic are practically the same thing. Therefore, the key principle for making a Plexiglas night light is the same as in the previous version. The only difference is that plexiglass can not be hung on the wall, but, for example, put on a table or even on the floor in the corner of the room.

One of simple options creating such a nightlight:

1. Make 3 rectangular plexiglass blanks. The size can be arbitrary, but each blank should be slightly longer than the previous one.
2. Draw on paper any pattern you like. Place the paper under the blanks and circle the pattern on the glass with a scalpel or other tool. It is best if at the same time on plexiglass there will be protective film. Take it off when you're done.
3. Cut out thick wooden board figure of the desired shape - it will be a stand. Make another shape of the same shape.
4. In one of the figures, make cuts for acrylic blanks (you can use a regular drill), and in the other, a recess under led strip.
5. Place the tape in the recess, glue the wooden figures. Then insert the plexiglass blanks into the slots. A spectacular night light is ready!

In order for the night light to shine well, the recess for the LED strip must “cover” all 3 slots.

Paper

Do-it-yourself paper night light is one of the less expensive ways to make it

Paper is a very malleable and flexible material. Anything can be made from it. Here is just one of the many examples of paper nightlights:

1. Take a sheet of thick multi-colored paper, draw any image or pattern on it.
2. Poke out this image along the contour with an awl. You can also make solid cuts with a blade.
3. Roll a sheet of paper into a tube so that the outline of the image is inside. Glue the resulting cylinder.
4. Place a small flashlight or a candle covered with an upturned glass on the table. Hide the light source under the paper cylinder.

Night light-garland

There are many options for such nightlights, because. you can choose a garland of any color and shape

A garland night light is one of the most simple ideas. Girls often make such nightlights at school labor lessons. To make a lamp, do the following:

1. Take a glass container. It can be a jar, vase or bottle of any shape.
2. Place a garland inside the container. It is better to use LED as it does not heat up and is therefore safe for glass.
3. Pass the cord from the garland through the hole in the container and place the resulting night light with the hole down. To make it stand better, you can cut a small notch in the edge of the hole for the cord.

Use a container with thick frosted glass. Then the wires of the garland will not be visible - only bright multi-colored light bulbs.

With the effect of the starry sky

You can try to make the sky realistic by repeating the contours of real constellations, or you can depict schematic constellations that are not at all like real ones.

This is one of the most popular ideas of all time. The romantic effect of lighting does not leave anyone indifferent, and the area for experiments during creation is simply huge! In order to make such a lighting device, you need:

• ordinary glass jar(or unusual if you want more beautiful ceiling) with a lid;
• thick foil (a simple kitchen one will do);
• flashlight small size(to fit in a jar);
• marker or marker;
• awl and scissors;
• hard surface - plank, tray or the like.

How to make such a nightlight:

1. Draw stars on the foil with a marker.
2. Lay the foil on a hard surface and pierce the stars with an awl. The resulting holes can, if desired, be carefully finished with scissors, giving them a pentagonal shape.
3. Cut a sheet of foil so that its height is equal to the height of the jar. Then roll it into a tube and place it inside the jar, smoothing it along the walls. Should work glass containers tightly lined with foil from the inside.
4. Insert the included flashlight into the jar and turn the structure upside down.

To give the night light a "heavenly" color, you can use a decorative jar from a home improvement store, and for lighting - a garland or light bulb with dark blue glass.

With infinity effect

Prepare materials - the main difficulty in creating such a night light

To make an impressive night light you will need:

• acrylic mirror (regular or double-sided - it doesn't matter);
• translucent glass;
• aluminum strip;
• LED Strip Light;
• any piece of wood.

The process of making a night light is quite simple:

1. Make grooves in the bar into which you can insert a mirror and glass. It is easy to make cuts of the required width with a jigsaw or a conventional drill, choosing a drill to fit.
2. Fold the aluminum strip into a rectangle and fasten it with bolts to the bar between the cuts, as shown in the photo.
3. Wrap the aluminum with LED strip. You can attach it with glue or wire.
4. Insert the mirror and glass into the slots. The nightlight is ready! Place it on the table with the glass facing forward.

The moon-night light will become an original decor element of any room

To make a real glowing moon for your bedroom, you need the following materials:

• round balloon;
• a roll of paper towels;
• glue (regular PVA is best);
• sponge with large pores;
• paint (preferably acrylic).

Match paint to the color of the moon (pale yellow or ivory) to achieve maximum effect. You can also mix white paint with ocher - you get the desired shade.

Such a night light is made quite simply, although it requires a lot of free time:

1. Outline the knot of the balloon with a marker. You should get a circle with a diameter of about 6-7 cm. This area does not need to be used in the future, it will be removed.
2. Dip a round balloon into a container of glue. If there is not enough glue, the ball can be painted with a brush.
3. Paste the balloon paper towels. Wait until the glue hardens. Then apply another layer with a brush and repeat the procedure. There must be at least 3 layers of towels for the ball to come out hard and dense.
4. After complete drying, paint the ball with acrylic paint.
5. Take a large-pored sponge, dip it in the same paint and carefully “print” the ball from all sides. For realism, you can "copy" the image of the real moon. It is this stage that is important for creating the lunar surface with craters and seas.
6. Wait for the ball to dry. Then cut a hole along the outline made with a marker and remove the balloon with tweezers.
7. Place a bulb in a cartridge inside, a white garland, or use the moon as a lampshade for a floor lamp.

Cloud

A night light in the form of a cloud is one of the simplest and most cost-effective options for a homemade night light.

To make a night light in the form of a thundercloud, you will need a lampshade of a round or oval shape, cotton wool, LED lamp(or several multi-colored light bulbs) and glue. It is also necessary to prepare a dense thread to hang the product from the ceiling. The lampshade can be replaced with a wire frame, giving it a round or oval shape. Such a frame will need to be pasted over with a thin translucent fabric.

The process of making a night light is as follows:

1. Make a hole in the lampshade and insert a light bulb into it. Pass a thick thread through it. If the light bulb you are using is powered by the mains, the lamp can be hung on a cable.
2. Cover the lampshade with cotton. You need very little glue - a small drop for each piece of cotton wool. Try to shape the cloud using both small and large pieces of cotton.
3. The hole in the lampshade can also be sealed with cotton so that it is not visible.
4. Hang the resulting lamp from the ceiling. During the day, it will look like an ordinary summer cloud, and at night it will “rage a thunderstorm”.

Rose

For the manufacture of such a night light, you can choose any color of paper, combined with the interior.

It is quite difficult to make a beautiful luminous rose, but the result justifies the efforts and the time spent. To make this night light, you need cardboard, corrugated paper, acrylic paint(pink, burgundy or yellow - depending on the chosen color of the rose), glue stick, and wire.

And here is the manufacturing process itself:

1. Cut out a rose petal template from cardboard. It is important to give it realism, to make it look like a real petal - so the lamp will look more beautiful.
2. Cut out petals from crepe paper according to the shape of the template.
3. Round off the ends of the petals with scissors to make it look like the one in the photo. Applying scissors to the edges of the petals, iron the paper, and after a few such strokes, it will itself acquire roundness.
4. Glue the petals in the shape of a rosebud, place the LED inside to match the color of the paper. You can, however, experiment with different shades.
5. You can also make a stem, as in the photo, and glue a green LED to each leaf. But a rose without a stem will look good as a table lamp.

Such a night light can be either small, placed on a table, or occupy a distance from floor to ceiling.

Wooden nightlights are very popular because wood is much easier to work with than glass or metal. From it you can create the most bizarre shapes. And the varnished wood looks amazing and successfully complements any interior.

Materials that may be needed to make a wooden night lamp:

• wooden boards, bars or logs (depending on the chosen lamp model);
• paint or varnish;
• a light bulb or LED strip (it is preferable to use the tape, as it does not heat up and is therefore safe for wood);
• glue, nails or bolts (depending on the chosen method of fastening);
• sandpaper.

Tools needed to make a night light:

• small saw or jigsaw;
• drill;
• brush for applying glue;
• screwdriver;
• woodworking machine (needed when making complex models of lamps).

Step-by-step instruction

The process of creating all wooden night lamps is quite similar. Consider it on one very beautiful example:

1. Take a flat log about 0.5 m long and about 15 cm in diameter. The exact dimensions do not play a role - the main thing is that it should not be too large.
2. Saw the log into washers, make 2 of them somewhat thicker than the rest - they will be located above and below.
3. Drill a hole in the very center of each of the washers. On two thick washers, the holes should be blind, and on all the others - through. If there drilling machine, you can make wide openings, no - narrower, slightly expanded with a chisel or jigsaw.
4. Sand the holes with sandpaper to get rid of splinters. Then grease them from the inside with glue: this will allow the future night light to keep its shape and not “cry out”.
5. Coat the wooden washers with varnish, let dry well.
6. Thread the washers evenly onto the rail or metal rod across the width of the hole. The rod can be pre-wrapped with LED strip, or you can install individual LEDs after the structure is assembled.
7. Try to distribute the lighting so that each gap between the pucks glows evenly.

LED

If you are making a night light for a child's room, you can use your favorite cartoon or book character.

The LED night light is best option for handmade. After all, diode tapes and light bulbs never heat up even during continuous operation, and therefore they are safe for wood, paper and all other materials.

Necessary materials and tools

In the manufacture of LED night lights, you most often need:

• diode lighting element (diode tape or light bulbs);
• base for a night light (lampshade, frame made of wire or improvised means, wooden stand and so on.);
• glue;
• scissors, awl or other tools.

Step-by-step instruction

The model of the LED night light can be absolutely any - what the author's imagination is enough for. Let's look at the process of making one of simple lamps requiring very little time and effort:

1. Take a sheet of plywood and draw an image of a cat on it. Simply print and circle the template. You can draw any other animal or anything at all - it depends only on your imagination.
2. Carefully cut out the image with a jigsaw.
3. If appearance plywood does not suit you - varnish it or paste over it with the same wallpaper that is used in the room. Then the silhouette of the cat will merge with the wall, which will add showiness to the night light.
4. Glue the LED strip to the back of the figure. Place it closer to the center - then the light will be soft and uniform.
5. The night light should not fit snugly against the wall. It should be hung on any fasteners that you have. To do this, glue a small wooden block to the back of the plywood figure, and fix this block on the fasteners.

From improvised means

In order to make a night light with your own hands, just dig in your pantry or closet

To make a nice lamp, it is not at all necessary to go to the store for materials or look for suitable ones in the country. wooden bars. There are many ways to make nightlights from any materials at hand.

What can be useful?

To create you will need:

• any materials that you found at home (in our case, a bottle of wine);
• old New Year's garland;
• drill;
• clay (if it is not - sand or earth from a flowerpot);
• multi-colored threads;
• glue.

Step-by-step instruction

To make such a nightlight is very simple:

1. Remove the label from the bottle. To remove it easily and without residue, put the bottle in a container with warm water for a few minutes. After that, the paper will fall behind itself.
2. Drill a hole in the bottom of the bottle, at a distance of 1-2 cm from the bottom. To prevent the glass from overheating and bursting, stick a little wet clay, sand or earth on the desired area of ​​the bottle. Drill little by little, pouring water into the hole from time to time.
3. When the hole is ready, wash the bottle and wait until it is completely dry.
4. Push inside the container Christmas garland, and pass the power cord through the drilled hole. Here you have to tinker, given the narrow neck of the bottle, so please be patient.
5. If you want to decorate the bottle with something, wrap it with multi-colored threads dipped in glue. Quantity and density do not matter - you can make a small pattern, or you can cover the entire bottle. The main thing is to leave holes through which light will come out. The nightlight is ready!

Making a handmade night light is a fun and easy process. It is not at all necessary to be able to handle wood or buy any special materials to make a beautiful and stylish night light. Design ideas are limited only by the imagination of the author.

The key goal of creating a night light with my own hands- by no means economy. Lighting are not that expensive, and anyone can afford to buy a model to taste. The main charm of handmade is to feel like a real creator and create a very real reminder of the creative process. When looking at a “own-made” night light, a person will definitely experience more pleasant emotions than in the case of a night light from a store.

Well, if it’s not cool to create weather phenomena at home, now we are not talking about the coolness from the split system, but about the wonderful clouds hovering in the room. Of course they are very beautiful, but their cost is such that it is easier to do it yourself. Indeed, why not make such beauty with your own hands? The girls from the Like a Riot blog just asked this question. They not only made a cool luminous cloud with snowflakes by hand, but also made detailed instructions how to do the same with your own hands.

This is how this beauty will look in the end, and now is the time to learn how to make it yourself

To create a cloud you will need:

Round lamp (sold in Ikea);

2 styrofoam balls (or any other lightweight white balls that hold their shape)

1 kg of cotton;

White garlands (to create a storm effect);

Garlands in the form of snowflakes (just for beauty);

Glue gun;

Nylon thread;

5 screw hooks (for attaching the lamp to the ceiling);

Transparent cable ties.

The first step is to screw the screw hooks into the foam balls, after securing them with glue, since the foam is quite loose

After that, using a glue gun, we attach the balls to the lamp (make sure that the hooks are pointing up)

After that, you can start applying a layer of cotton wool

To do this, it is best to use a glue gun so as not to wait for the glue to dry.

Done, now it's time to put garlands in cotton wool, imitating the effect of a storm and hanging it from the ceiling with nylon threads

After that, you can apply another layer of cotton wool or try to fluff the first one.

This is an option proposed by the girls, so no one bothers you to try to attach a garland first, and then apply cotton over it.

Looks cool, but that's not all

To create the effect of a snow cloud, the girls bought a garland in the form of snowflakes, the bulbs of which they fastened 2 pieces each for a more spectacular "snowfall"

Garlands do not have to be in the form of snowflakes, if you do not like the idea too much, then you can not attach this garland at all.

After that, it remains only to fix the snowflakes on the lamp with transparent ties

Latest improvements

The result is really impressive

And the snowflakes hanging from the cloud also turned out to be very impressive.

Unfortunately, there is no video with the effect of the storm, but it is not difficult to imagine it yourself, just remembering how the lights of the garlands run.

And he, in turn, very much depends on small details, like.

The idea of ​​home clouds emitting light came from insta-girls, for whom it is very important to have a bright and unique background during their selfies. We have to admit, the idea is incredibly budget and cool at the same time. In proper conditions, luminous clouds will impress, evoke romantic and fantasy thoughts, you will want to take a picture with these clouds.

The light from the clouds is enough for how much you have prepared the clouds themselves. If the cotton wool is sufficiently whipped, and the light bulb inside is LED, it will be light enough even for reading and needlework, such as beads.

This type of luminaire should not be used as a constant light source, it is best to use a luminous cloud as wall lamp and just decorative element rooms.

You will need:

1. Regular rolled cotton.
2. Bottle.
3. Bichevka.
4. Output for lighting.
5. Insulating tape.
6. Double sided tape.
7. Led Lamp

Manufacturing process

1. First of all, you need to prepare the base, namely the bottle, you need to cut off the neck from it, which will be the base for the cloud. A hole is made in the middle of the bottle cap, a wire from the lamp will be threaded into it. Please note that in order for the cloud to glow with an even yellow or white color, choose a transparent bottle.

2. Now you need to bring the wire inside the neck, try on that everything fits. The neck is carefully attached above the lamp, so that the lamp does not touch the plastic, and is fixed directly on the wire with electrical tape. If everything is fine, then you need to move on to the next step.

3. Take cotton wool, stir it up, straighten it so that it increases several times in size, but at the same time remains dense. To make cotton wool look like a real cloud, you need to beat it partially, leaving the cotton wool dense somewhere, and bringing the cotton wool to an airy state somewhere. An ordinary skein of cotton wool from a pharmacy should increase at least ten times.

4. Put cotton wool on the base, fix it on double-sided tape along the line of electrical tape and the neck. And spread the cotton a little more for volume. Finally secure everything with a twine.

* There is a slightly simpler process: prepare the cotton wool and the base, and then invite an electrician to ensure that he correctly displays and puts everything on.

You can turn on the lamp when you want aerial impressions or the most charming photos for instagram. By the way, you can make a lot of such clouds and make a real air-cloudy room for fantasy photo shoots.

Everyone wants to get in sometimes. real fairy tale where unrealistic things are possible. To add variety to your established life, you can make clouds of cotton wool quickly and simply with your own hands. These elements are quick and easy to perform, and the amount of joy from them will exceed all expectations. Children will especially appreciate the clouds.

We make simple luminous clouds from cotton wool with our own hands

by the most interesting option design of clouds can be called their manufacture based on the addition of lighting. They can be made with children or as a surprise for them.

For crafts you will need the following materials: cotton wool, spray glue, rice paper lampshade, light bulb or LED strip. To decorate the lampshade, you need to glue the prepared cotton wool evenly on its surface, for this the material is torn into small pieces and fastened with glue. When everything is thoroughly dry, we proceed to create a glowing effect.

You can use the lampshade for its intended purpose, and just screw an ordinary light bulb into it. And you can carefully glue the LED strip along the inner walls of the workpiece. The tape, in which the lights change color, is able to give a complete immersion in a fairy tale.

Children are constantly learning the world, which is full of various terms and names. Exists a large number of types of clouds, each of which has its own shape and name. In order to better and faster master the information received, you can use the board game-application.

To do this, you will need cotton wool, glue, a cardboard base with photographs of various clouds. First you need to carefully consider the proposed species, then, together with the child, say their names. After that, you can start making crafts.

The point is to lay out and stick cotton wool on cardboard as much as possible like clouds. The material is torn off from the main part in small pieces for ease of use.

These clouds can be given a natural appearance. The master class is a fairly simple description.

For crafts, you need to stock up on ordinary balloons, thin paper, glue and cotton wool. Balloons inflate and tie in the form of a cloud. During the process, you can experiment with the size of the inflated balloons. If you fill them with helium, then the clouds will turn out to be real - flying.

When the bunch in the form of a cloud is ready, we proceed to the next step. We take thin prepared paper and PVA glue, with which we carefully coat the workpiece. Then we glue paper to the balls, tearing it off in pieces, using the papier-mâché technique. This will give strength and integrity to the structure. Let dry a little.

When the glue is almost dry, you can start attaching the cotton wool to the paper with glue. After completing all the strokes, a fairly believable cloud is obtained. It can also be equipped with a backlight if desired.

We make fluffy clouds without a base with our own hands

To create this type of cloud, you will need more cotton wool than in previous methods. You should also prepare a starch paste, a deep container and a tray.

First you need to prepare a paste. For this in? liters cold water 2 tsp is added. starch, the mixture is thoroughly stirred and brought to a boil. It should be remembered that it is not necessary to boil the paste. It is enough to stir it periodically to avoid burning. The prepared paste is used when it has cooled to a temperature comfortable for the hands.

Clouds of desired sizes are formed from cotton wool. The prepared container is filled with welded paste. Formed clouds should be briefly dipped into it. Fingers can evenly distribute the glue on the cotton. If its excess is felt, then the lump can simply be squeezed out.

Place blanks on a tray with smooth surface. Leave them to dry for a day, periodically turning over for a uniform result. When the cotton wool is completely dry, you need to crush the resulting clouds. For the convenience of placing them around the apartment, you should tie thin strings to them, with the help of which the clouds will attach to the ceiling.

The idea with clouds is used in the design of children's holidays. All kids will appreciate the work done. Clouds can cheer up a sick child who is forbidden to go outside until he is fully recovered.

For themed games with children: you can imagine outdoor recreation. For young couples in love great idea confess your love, additionally decorating with hearts and other attributes.

Using the suggested ideas for making clouds, you can create a variety of crafts. They can be made in completely different shapes, sizes and themes.

Video selection on the topic of the article

The proposed video collection contains lessons on making clouds from different materials with your own hands. In them you can find a visual demonstration of the entire process with easy-to-understand explanations of each step.