Plastic windows are becoming more and more popular among the owners of city apartments and suburban housing due to their ease of use, tightness, high degree of sound insulation, simplicity and unpretentiousness in their care, and also due to the fact that they do not require additional insulation before the onset of cold weather and painting to give decorativeness. However, without such a procedure as lubrication plastic windows with your own hands, still not enough. In addition to lubrication after long-term operation of mechanisms, sometimes they need additional

To carry out these processes correctly, without resorting to outside help, you need to study some of the nuances associated with them. Moreover, to do this work is quite easy, having necessary tools.

With long-term operation of plastic windows, especially if they are installed in the houses of large cities, where there is a high intensity of traffic, the mechanisms get a large number of dust and dirt.

These unwanted contaminants settle on the lubricant used in their manufacture, mix with it, which begins to make it difficult for mechanisms and fittings to open and close. In addition, the old dirty grease, saturated with microparticles, gets a pronounced abrasive effect, instead of preserving parts and imparting antifriction properties, on the contrary, it leads to their accelerated wear and can completely disable them.

If do not mention it to malfunctions in the operation of the valves, before they completely break down, they kind of “warn” that they urgently need prevention, starting to make a sound of clicks, creaking or grinding.

Such sounds indicate that there is practically no high-quality lubrication in the mechanisms, and individual metal parts of the window rub against each other, and this leads to metal abrasion. The tyranny process adds metal dust to the dust and dirt from the street, which can interfere with the normal operation of the lock, and the handle will be hard to turn without completely closing it. These processes will violate the tightness of the fit of the sash to the frame, and cold air gain access to the premises.

If the frames have been installed for a long time, and one of the elements of the mechanism is out of order, it may also happen that such a spare part can no longer be found, due to the removal of this system from production. In this case, you will have to change the entire "stuffing" of the mechanisms to a new one, which will be very expensive. In addition, sometimes it is simply impossible to fit new mechanisms to previously installed frames, so you have to completely.

This explains the urgent need for periodic preventive maintenance of the working mechanisms of windows. These works are not difficult, but they will help to maximize the life of plastic windows and avoid expensive repairs.

You need to know that manufacturers give a guarantee for window fittings for only 4 ÷ 5 years - this is the period for which factory lubrication will be enough. Sellers do not always warn about the need for preventive measures, and the owner of the windows himself thinks about it only when a creak or rattle appears, although sometimes it is too late to do anything. Therefore, you should not rely on guarantees and wait until the end of the deadline - you need to make it a rule to regularly pay attention to windows.

Lubrication intervals

Lubrication intervals metal fittings may be different. If initially for this process were used quality formulations , and the house is located away from major highways, then it is enough to carry out prevention once a year, best of all - with the onset of warm spring weather. Under more severe operating conditions of windows, in which severe contamination of fittings occurs, it will be necessary to carry out measures to lubricate moving parts more often, about two to three times a year.

How is window lubrication done?

When it comes time to carry out preventive maintenance, the question arises of what is the best way to lubricate. In principle, any technical oil that lubricates mechanisms is suitable for this process. Most often they use the usual machine, which is present in every house where there is Sewing machines. You can also use a silicone-based lubricant. However, there are also special formulations designed for such a procedure.

They are sold in metal cans and in plastic bottles with nozzles convenient for lubrication.

One of the most popular lubricants among home craftsmen is WD-40.

WD-40 is one of the best and most user-friendly lubricants.

Processing must be subjected to all movable mechanisms of the system of fastenings and constipation. The process is carried out as follows:

The sash of the window opens, and all its sides are examined.
Further, soft cloth dirt is removed from the fittings along with the old grease, since the new composition must be applied to a clean surface. You can use a sponge or long-handled brush to clean some areas.
After cleaning, the mounting brackets, bolts, latches, handle mechanism and other moving parts that ensure the closing and opening of the sash are abundantly lubricated.
Spraying the agent from a cylinder is more preferable, since the agent applied in this way is able to penetrate even into the most inaccessible corners of the moving mechanisms. For convenience, many lubricant bottles are equipped with removable tubular "nozzles", with which you can apply the lubricant composition to the parts of the mechanism hidden by the frame body.
If grease is used in vials, then 1-3 drops are dripped onto each of the parts.

In order not to spoil the window fasteners, you should not experiment and use vegetable or butter, various cosmetic gels and petroleum jelly, as well as other similar substances that are not intended to facilitate the operation of moving mechanisms.
Lubrication of all elements window frame and sashes are carried out simultaneously.

Do not ignore the rubber seals. They must be treated with a composition specially designed for them, preventing them from drying out, losing elasticity, otherwise the necessary tightness of the window sash to the frame will not be achieved, the sealing of the window will be broken with all the ensuing consequences - penetration of cold, noise from the street, dust ingress.

If, however, timely preventive maintenance of all mechanisms and elements is carried out, then the window system will last a long time without failures and will not require the replacement of individual parts. In addition, lubrication will help eliminate the risk of drafts and heat leakage from the premises of the apartment.

Video: preventive maintenance tips for plastic windows

Checking and adjusting plastic window fittings

Fittings include all metal and plastic elements, which are equipped with plastic windows, both movable and permanently installed. If they break or become loose, the window system will not be able to perform the functions assigned to it hermetic closing, free opening of the sashes and setting them in different positions.

For example, the handle mechanism is designed in such a way that it allows you to open the window wide open or just open it slightly at the top for ventilation.

Some elements of fittings provide a smooth ride, thereby eliminating the breakdown of mechanisms. Other details are designed to regulate the uniformity and force of pressing the window sash to the frame, providing not only heat preservation, but also sound insulation.

Find out, and review the causes and remedies, from our new article.

In order for all these elements to work effectively, the prevention of windows, in addition to their lubrication, also includes the periodic adjustment of some parts. However, it should be noted that adjustment is carried out only when clearly necessary, and only in cases where the window does not close completely or the handle does not turn well. Both processes - lubrication and adjustment are usually carried out in combination. To do this, you will need some tools, which, by the way, may not be in the owner’s “arsenal”, but they can be purchased at hardware stores.

For example, you can not do without a 4 mm hexagon curved shape.

Such part keys are used when assembling furniture, so they are probably in departments furniture fittings. In most window systems, it is this hexagon that becomes the main tool for adjusting mechanisms.

Certain difficulties may arise with a screwdriver. It’s good if the fasteners on the window are designed for a regular curly screwdriver (usually a “troika”). But there are window systems on which torx stars are used.
Pliers are likely to be in every home.

Adjustment of individual mechanisms of plastic windows is carried out to eliminate the problems that have arisen, which can include:

difficulty in moving the sash when opening or closing;
the occurrence of sagging windows or doors;
the appearance of cracks, that is, a violation of the tightness in the closed state of the valves;
replacement if necessary individual elements, in connection with their failure;
when the window system is switched from the "summer" mode to the state for winter operation.

Starting the adjustment, you need to know exactly how it is carried out, and which elements are subject to it.

The process of regulating the window mechanism is carried out according to the basic points, which include:

Accurate installation of the window sash horizontally;

Similar actions vertically;

Adjustment of the required tight clamping of the sash;

bottom opening angle of the sash in ventilation mode.

When adjusting the window elements, turn the adjusting screw clockwise or in the opposite direction with a key. Depending on the side where it turns, the sash will move.

When changing the position of the sash, after each turn or half turn of the screw, it is necessary to check the operation window system. If necessary, the screw is turned back a certain angle. It is not recommended to turn it immediately over a long distance - it is best to do this gradually, shifting the position of the sash by 0.5 - 1 mm.

In addition to the base points, the fasteners are adjusted, which are installed using bolts with a slotted head for a curly screwdriver. If necessary, you can loosen or tighten the fastening of the adjusting elements with the necessary change in their position.

adjust pins;

bolts in the "scissors" system;

The level of tightening of screws in the scissor system is checked

fastenings in the upper canopy;

fastenings in the lower canopy;
clamping mechanism;
balcony magnetic latch;

The handle can also become loose - the screws need to be tightened

window opening mechanism.

Video: how to care for plastic windows

The mechanical part in plastic windows of different companies is arranged, as a rule, according to the same principle, so the adjustment instructions should fit any of them. Each manufacturing company that respects itself and its customers gives detailed descriptions their products and advice on how to care for them. If you wish, you can always refer to the primary sources, knowing which company's windows are installed in the apartment.

Having all the necessary tools and lubricants, going to work without haste and understanding the design of the mechanisms, it is quite possible to carry out this work on your own.

Find out what you need, as well as consider the types and methods of installation, from our new article.

For a fairly quick period of time, plastic windows managed to take a leading position in terms of the number of installations, since the vast majority of windows in houses and industrial buildings are PVC windows. In order for the plastic window to serve you for a long time, it is necessary to carry out special care for it, which we will talk about.

Rules for the care of plastic windows

Caring for plastic windows is a mandatory procedure, otherwise the window will begin to lose its tightness, fittings may fail, or the rubber seal will wear out quickly, and much more. After it has been made, it is necessary to remove the protective tape that is glued to the profile, since after a while it will be very problematic to remove it due to exposure to sunlight.

Now with regard to washing plastic windows. It is necessary to wash plastic windows with special detergents for windows and special napkins or rags. If any dirt appears on the profile, in no case clean it off with sharp objects: a knife, a scraper, etc. To remove difficult pollution, use special means, to remove dirt from plastic surfaces or directly from PVC windows.

Before washing the window profile, we recommend that you first remove the layer of dirt and dust, this is best done with a soft and thick bristle brush. Then the window can be wiped with a napkin or rag, having previously applied detergent to its surface.

Preparing windows for the change of season

2 times a year, the fittings of plastic windows need to be adjusted.

How to care for plastic windows in winter

Caring for plastic windows in winter includes: washing window profile and glass, as well as switching the sash clamps to winter mode so that the sash fits snugly against the profile when closing and cold air does not pass through it. This is done before the winter season in October-November.

How to care for plastic windows in summer

Caring for plastic windows in the summer includes: washing the profile, glass and transferring clips to summer mode so that the sash does not press too tightly against the profile.

Sash adjustment

Due to temperature changes, the window profile can narrow and expand, and because of this, the sash can begin to rub somewhere. To adjust it, use a hexagon. How to adjust the window sash - shown in the picture below.

How to care for plastic window fittings

Hardware is a complex mechanism that is responsible for the movement of the sash. In order for the mechanism to work freely, it must be lubricated with machine oil. To do this, pour oil into the moving parts of the window, and then several times move the window from one position to another.

Caring for plastic window seals

Proper care of plastic windows also includes care for the rubber seal of plastic windows. Please note that it is the rubber seal that provides high-quality sealing of the window profile. Like any rubber, window seal wears out: it becomes hard and inelastic, shrinks and cracks. In order for the window seal to last as long as possible, it must be cleaned and lubricated 2 times a year, as mentioned above: before the start of the summer season and before the start of the winter.

In order to clean the window seal, it can be both removed and cleaned in this state. If you have removed the seal, place it in a container of warm, soapy water for a few minutes, and then rinse clean water and wipe with a dry cloth. Next, insert the seal into the sash and into window hole, then applying a silicone agent to a rag, treat the surface of the seal.

Care products for plastic windows

To care for plastic windows, use both special sets of products for the care of plastic windows, and separate ones. To take care of your windows:

Glass cleaner (eg Clin);

Plastic profile cleaner;

Seal cleaner or soapy water + silicone grease;

Machine oil for lubricating fittings.

With the advent of spring, people begin to open windows, which means that they need to be cleaned and washed properly. Most people have plastic windows, it is quite practical and convenient. They do not need to be painted with an enviable frequency and insulated for the duration of the winter. And this cancels the purge from old paint and adhering insulation material.

The main difference between plastic windows and traditional wooden ones is their tightness. But because of this, condensation is possible, this will help to avoid periodically opening the window and ventilating both the frame itself and the room as a whole. This is both good for health and will not allow high humidity in room. Knowing how to care for plastic windows, you can enjoy their convenience and aesthetic appearance for a long time.

Caring for plastic windows and window sills is not only glass washing. Plastic profile, fittings, drainage holes and sealant also require periodic attention. The window will serve for many years if you take a few minutes to care for it, no more than once a month.

plastic profile

The plastic from which the window is made has a great advantage - it is very easy to clean. For him, it is not necessary to use any special means. The main thing when washing a plastic profile:

Do not use bleach or powder.
Do not use chemical and alcohol-containing solutions.
Do not use rags with a scratchy surface.
Be careful not to let water get into the seal and fasteners.

If it turns out that the pollution is too strong and soap solution does not help, you can use a specialized plastic window care product for cleaning. Such substances are sold in any household store or window manufacturer.

window seal

Seals for plastic windows are made of high quality rubber or rubber with the addition of silicone and are painted in gray or black. The condition of the window seal depends on whether the room will be warm and quiet. Therefore, it is worth lubricating the sealant with glycerin a couple of times a year, silicone grease or rubber care products. Once a month, when the entire window is washed, the seal is cleaned of dirt and wiped with a damp cloth.

It is also important to monitor the condition of the hardware that presses the sash to the frame. It often happens that through a strongly pressed window during the winter period, the seal can be completely crushed and it will have to be changed. The process is simple and not even expensive, but why do it when it is enough just to adjust the hold-down bolts from time to time.

window fittings

Whether the window will function well or jam depends on how well its fittings work. In order for its moving elements to work without jamming, periodic maintenance and preventive measures for the operation of the window are also necessary for it. For example:

You can not hang anything on the window sashes.
It is impossible to allow falling of different objects and things between the frame and the window sash.
You can not sharply and strongly pull the sash when opening.
Do not hang on window handles and sashes.

Important ! Under no circumstances should nigrol be used to lubricate fittings, since its dense structure and the presence of an abrasive in the composition can damage some parts.

Accessories are usually lubricated with machine oil, grease, petroleum jelly or special grease, having previously cleaned them of small debris and dust.

Special grease, in fact, is a tube of refined oil, but the inscriptions say that this is a unique and unrepeatable product. It's all a publicity stunt, and really any oil and grease will do. The only difficulty may arise with technical solid oil, since it is able to freeze or thicken in winter, which will have a bad effect on the operation of the mechanisms.

Advice ! When choosing a lubricant for plastic window fittings, make sure that it does not contain strong substances that can damage the mechanism. It is best to consult with experts when buying.

Window drainage holes

At the bottom of the window there are special holes that serve as drainage channels. Through them, the condensate that accumulates on the window comes out, which helps the glass not to fog up. Caring for plastic windows does not exclude cleaning all openings.

Periodically, the drainage holes must be checked, due to the accumulation of dirt in them, moisture will not be able to leave, which means that the window will sweat. If the drain holes become dirty, they can be easily cleaned with a simple solution of warm water and soap, or detergent without aggressive substances.

To do this, simply open the plastic caps and clean the holes as far as possible. By the way, many modern windows, equipped with a multi-chamber profile, do not need to clean the drainage holes at all, and the system of complex labyrinths inside the window frame completely removes condensate, while preventing dirt and dust from accumulating inside.

In addition, multi-profile windows have improved ventilation, which means that you will have to ventilate the room much less often.

Double-glazed windows

The glass of plastic windows can be of different degrees of transparency, it depends on the individual order. Transparent glasses, as well as tinted ones, are washed with ordinary warm or room temperature water with a glass or dish detergent diluted in it.

The main thing is not to use powders and sharp objects when washing glasses. If the contamination cannot be washed off with water, you need to buy a special detergent in household chemical stores.

Important ! reflective glass, decorative coating, you need to wash with care with different means. To begin with, it is worth checking the product on a small part of the glass.

Inside the double-glazed window is not washed, as it is closed hermetically, due to which dirt and dust do not get inside.

Windowsill

Often plastic window sill Simply wipe with a damp soft cloth. For more severe contamination, you can use a soap or powder solution with warm water or a special care product for plastic products.

The texture of the plastic from which the window sill is made can be different. It can be a ribbed surface or rough, smooth or glossy. Under different textures choose different means cleaning.

A yellowed, for some reason, window sill can be rubbed with a napkin moistened with alcohol or mushy powder so that its granules do not scratch the surface. You can also apply window cleaner to the plane by spraying it and waiting a bit, then rub and rinse with water.

By the way, it is often the yellowing of plastic that causes headaches for housewives. If detergents and cleaners do not remove yellowness, it’s sad, but most likely you have become a victim of low-quality material. Plastic simply fades in the sun, and yellow spots are not the result of pollution, but simply fading, and no means can remove it.

Here are some tips from seasoned hostesses:

For quick wet cleaning, Mr. Proper is well suited.
If the plastic has turned yellow, Domestos will help to return the whiteness to it.
Small stains, such as coffee stains, will quickly be removed with office equipment wipes.
Rusty spots are best dealt with by Sillit.
If children have painted the window sill with crayons or pencils, a melamine sponge will help.

Advice ! With regular wet cleaning of the window sill, special tools are not needed.

Conclusion

Caring for plastic windows in winter and summer will ensure their long service life. Cleaning and checking the window once a month does not take much time, but it will help to notice and correct problems in time.

At home, you can use improvised means to care for plastic windows. But in order not to think about how to wash and clean a window or glass, you can buy a special kit for the care of plastic windows. It already has:

Glass cleaning solution.
Liquid for cleaning plastic surfaces.
Grease for window mechanisms.
Gel lubricant for seals.

Such kits can be purchased both from window manufacturers and at any store that sells household chemicals.

Of course, ready-made kits are practical and convenient, but they also cost decent money, so if you don’t want to spend money, then all the components of the kit can be bought separately and it will come out much cheaper. Since the inscriptions on the packages of special products are nothing more than an advertising ploy, but the contents are ordinary cleaning, washing and lubricating agents.

Naturally, every person wants plastic windows to serve as long as possible and not lose their attractiveness. Therefore, understanding how to care for plastic windows is simply necessary to increase their service life. If you follow simple rules for the care of plastic windows and doors, they will serve for many years. All care operations are easily carried out with your own hands, as well as repairing PVC windows.

Wipe frames and glass with ordinary (but not aggressive) cleaning agents;
Use special products for the care of plastic windows to clean glass and frames;
Lubricate all existing moving parts at least twice a year with a resin-free technical means to increase the life of windows;
Rinse all seals with clean water and then be sure to lubricate them.

Don't block streams warm air from heaters to glass to prevent fogging of glass from the inside ();
Ventilate the room regularly. This reduces humidity and moisture will not collect in the insulating glass units in the form of condensation or fogging. Also, for ventilation purposes, a ventilation system or air conditioning is perfect;
Constantly check the condition of the drainage channels in the windows and regularly clean them of accumulated dirt. They are designed to remove moisture that collects inside the window. These channels are located at the bottom of the frames, they can be easily found when opening the sash;
And, of course, be careful with your windows.

Rules for the care of the PVC profile:

To get started, study the material on the topic and their elements.

The PVC profile used for the manufacture of windows requires special and complex care. From natural pollution (precipitation, dirt, dust), the profile must be cleaned with non-aggressive detergents;
In order to prolong the service life of products made of PVC profile, do not use gasoline, acetone, solvents or abrasive cleaners when cleaning heavy dirt;
Be careful not to hit or scratch the outer surface PVC profile.

Rules for the care of sealing rubber bands:

Sealing rubber bands are located around the entire perimeter of the doors and frames and serve to prevent the penetration of moisture and drafts into the premises. To increase the service life of sealing gums (to maintain their elasticity), it is necessary to regularly clean them from dust and dirt at least twice a year with cleaning agents containing glycerin or special agents;
Important! After the repair work or cleaning, sealing rubbers must be lubricated with resin-free products.

Rules for the care of double-glazed windows:

Glass panes must be protected from mechanical damage and blows;
Never use solvents or aggressive agents to clean double-glazed windows;
If possible, use special detergents for the care of PVC windows;
When installing or reinstalling double-glazed windows, it is recommended to resort to the help of specialists.

Rules for the care of window fittings:

All opening windows are equipped with fittings. The window handle, if it is loose, is quite easy to adjust. To do this, carefully lift the decorative bar located under the handle and turn it to a horizontal position. After that, stretch the fixing screws that fix the handle to the frame;
To increase the life of the fittings, all moving parts must be lubricated at least twice a year;
Use lubricants that do not contain resin;
Carry out preventive adjustment once a year;

Mosquito net care instructions:

Mosquito nets are made of aluminum frame and stretched mesh. On the window, it is fixed with the help of fasteners;
in winter mosquito net must be stored indoors
As it gets dirty, but at least once a year, it is necessary to wash it with warm soapy water;
Fasteners do not require special care.

Video. How to care for plastic windows

3738 0 0

Caring for plastic windows: a few simple ways For self-fulfillment

Greetings. In this article I will talk about proper care behind plastic windows with your own hands in winter and summer using simple and available funds. The topic is of considerable interest, since over 60% of the domestic housing stock is equipped with double-glazed windows in PVC profile.

Most compatriots build their relationship with glazing on the principle of "set it and forget it." This approach results in a limited resource for the operation of windows and, as a result, unforeseen expenses for repairs or for the installation of a new double-glazed window.

Features of care for double-glazed windows in PVC profile

How to care for plastic windows so that they last a long time without breaking? To answer that question, you need to understand that modern glazing is complex structure, consisting of several elements, the state of which determines the performance of the entire window.

Thus, you will have to take care of such components as:

accessories- the category of parts responsible for opening and closing the valves;
sealant- is responsible for the density of the porch of the doors and ensures the energy efficiency of the structure as a whole;
double glazing- the degree of light transmission of the window depends on its condition;
Profile- needs care, as it gets dirty during operation;
mosquito net- prevents the penetration of insects into the room.

Maximum effectiveness of preventive glazing maintenance in plastic frames is achieved as a result of complex maintenance of the listed components.

Consider the features of the maintenance of double-glazed windows in PVC profiles using the example of caring for the listed components.

Double-glazed window washing

Frequency of execution 1 time in 2 weeks. The transparency of glass, and hence the light transmission of the window, depends on how regularly and how correctly you wash them.

Do you think it's easy to clean glass without streaks? These instructions will make this task very easy.

To implement this method, we need:

Container with warm water;
Dishwashing liquid;
Scraper for glass cleaning;
Kitchen sponge with an abrasive layer;
Two clean, lint-free rags (one to be used as wet, the other as dry).

Washing instructions are as follows:

Pour detergent at the rate of 1 teaspoon per 2 liters of water and mix;

We moisten one rag with the finished solution and moisten the glass;

Do not try to wipe off the stains right away, as at this stage you need to moisten the stains so that they soften and can be easily removed later. By the way, be prepared for what will leak under the window dirty water, so I recommend immediately laying something on the floor or on.

We remove strong dirt with an abrasive layer of a sponge after they get wet;

We remove the remains of the washing solution with a scraper, which we lead in one direction, for example, only from the bottom up;

After each passage with a scraper, remove excess moisture from it with a dry cloth;
The washing procedure is carried out both on one and on the other side of the double-glazed window.

In order not to do the same work several times, I recommend immediately wiping the area where the profile adjoins the glass.

To perform the following method, you will need a spray gun, a scraper and vodka.

Did you know that most quality window cleaners are based on alcohol. The question is, why pay extra for dubious fragrances and dye in detergent, when an inexpensive alcohol solution can be bought in most stores?

Any vodka for washing glasses is suitable, the main thing is that the price of the product is as low as possible.

Pour the vodka from the bottle into a spray bottle - a garden spray bottle or a spray bottle from the previous detergent will do. Apply alcohol spray liberally to the glass, starting from the top towards the bottom.

Then wait a minute and remove the liquid along with the dirt with a scraper. The procedure must be repeated until the contamination is completely gone. The characteristic alcohol smell disappears in a few minutes.

By the way, vodka can be used to remove dirt from the screen of LCD monitors and TVs. The advantage is that the product, in principle, does not leave streaks and marks after drying. Only instead of a scraper when cleaning the screen, use paper tissues or toilet paper.

Mosquito net washing

The frequency of execution is 1 time per month. Mosquito net is a guarantee of comfort in a residential area, as most of insects from the outside gets through the window. But, dust and dirt are deposited on the grid during operation, and therefore proper and timely cleaning will be required.

How to properly wash the mesh so that it stays clean for as long as possible?

For proper cleaning nets from any dirt you will need an ordinary dish detergent, a clothes brush with a soft long pile, an old towel and a bath.

The mesh washing instructions are as follows:

We spread a towel along the bottom of the bath, on which we put the grid;

The mesh must be stable, for this it must be leaned against the wall. The towel on the bottom of the bathtub is not accidental, because if this is not done, the plastic frame can leave scratches on the acrylic surface.

We collect in the pelvis warm water and dissolve a small amount of detergent in it, stirring until foam forms;

We dip the brush in the foam and clean the mesh with a little pressure;

The window mesh is quite fragile, and therefore we press it carefully.

Leave the moistened mesh for 15 minutes, during which the detergent should act;

After the product has worked, take a brush and running water wash off the softened dirt on both sides of the mesh;
Lightly knock out the mesh so that the remaining water flies off it;
Now the grid is ready for further operation.

When cleaning the mesh, we do not use sponges and fleecy rags, as they can clog the cells and it will be very difficult to pick out these contaminants.

Cleaning the seals

The frequency of implementation is 1 time in six months. Thanks to high-quality seals fixed around the perimeter of the swing sashes, the tightness of the glazing is ensured. Therefore, the care of plastic windows involves regular cleaning and degreasing of the seal.

Window seals are made of polyurethane or rubber-containing polymeric materials. For preventive washing of the rubber cord, you can use a soap solution or a solution of any dish detergent.

There are two ways to wash the seal:

Without removing from the frame - best option for frequent preventive wiping;
Removing from the frame - the method is recommended to be performed no more than once every six months.

The instructions for caring for seals are simple:

We prepare a solution of detergent and warm water;
Wet a non-thorny rag in the solution;
Wash the seal with a rag along with the frame;
Do not allow to dry, wipe the moisture with a dry cloth.

The instructions for cleaning the seal with dismantling from the frame are as follows:

We examine the seal and find the area where its cut is located (usually in one of the upper corners of the opening);
We hook the end of the seal and pull it completely out of the groove;

Remove the seal from the groove as carefully as possible so as not to accidentally damage it. If the seal is damaged, a similar cord can be purchased from the market or from the organization that installed the windows.

The dismantled seal is washed in washing solution and wipe dry with a lint-free cloth;
With a stick for the ears, we clean the groove from which the seal was removed;
After the rubber cord has completely dried up, we press it into the groove in the same way as it was dismantled, but in the reverse order.

If the sealing cord has not been cleaned for many years, I recommend degreasing the part with which it comes into contact with the profile when the sash is closed. For these purposes, you can use a lint-free cloth and an alcohol solution.

PVC profile cleaning

Frequency of implementation 1 time in six months. A story about how to properly care for PVC windows would be incomplete without tips on cleaning the plastic profile.

The profile from which the frames and sashes are made, especially if it is white, quickly gets dirty. For example, outside it turns yellow from exposure to ultraviolet radiation and from dust. The gaps between the profile parts blacken over time, as dirt gets clogged in them.

All these contaminants can be washed off using special or improvised means. Dirt from the gaps in the profile is cleaned with an old toothbrush with hard bristles. As a cleaning agent, ordinary toothpaste. After the dirt is cleaned from the gap, the profile must be washed with clean water.

By the way, you can clear the entire profile in the same way, but why, if there are more effective means which can be bought at hardware stores.

COSMOFEN 10 is a white plastic cleaner used by professionals

If you decide to buy COSMOFEN, buy product number 10. Modifications number 5, 10, 15 and 20 are on sale.

Number 20 and 15 are too weak, and number 5, on the contrary, is too strong, as it dissolves plastic. Number 10 just doesn't damage the plastic, but removes most of the contaminants.

A new window in a PVC profile is pasted over with a protective film, which the manufacturer recommends removing no sooner than after finishing finishing slopes. But it often happens that the film on the outside of the glazing is not removed for a long time.

As a result, under the rays of the scorching sun and in the winter cold, the protective film partially cracks and peels off in pieces, and what remains is very difficult to remove. Common situation?

I offer an easier way to remove stickers without heating the profile.

We apply an aqueous solution of dish detergent to the remains of the film;
Leave the surface for a few minutes;

We wipe the surface of the profile with a rag, removing the rest of the solution;

Glue on top old film wide stationery tape;
Carefully smooth the surface of the glued adhesive tape;

After a few minutes, tear off the adhesive tape with the remnants of the film.

It is possible that the glued adhesive tape will not completely remove the remnants from the first time protective film. In this case, the procedure should be repeated several times, until the surface is completely cleaned.

Hardware setup

The frequency of execution as the narthex deteriorates and as the sashes sag. Now you know how to keep plastic windows clean with your own hands, it remains to figure out how to maintain their optimal technical condition.

During operation, the window sashes sag, jam and close every other time. You can solve the problem by simply adjusting the fittings, due to which the sash can be adjusted in almost all planes.

To adjust, we need a 5 mm hexagon and a slotted screwdriver. The adjustment instruction is as follows:

With a screwdriver, pry off and remove the casing of the lower hinge;
We install the hexagon in the upper adjusting screw and move the sash vertically;
We install the hexagon in the lower hole and move the sash in a horizontal plane;

At the top of the sash we find a loop with similar settings;

The hinge settings in most windows allow you to move the sash in different directions an average of 2 mm. This is enough to compensate for the sagging of the sash due to long-term operation. If adjusting the fittings does not help solve the problem, the fittings need to be replaced, and for this you need to call specialists.

From the end of the sash we find a clamping eccentric, which we adjust in summer or winter mode.

Conclusion

Agree that caring for plastic windows is not as difficult as it might seem at first. I hope that the proposed instructions will be useful to you and you will be able to extend the life of double-glazed windows in your house or apartment.

If any questions appear in the plastic window care processor, ask them in the comments, I will be happy to answer them. By the way, you may find answers to your questions by watching the video in this article.

October 9, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!