After installation plastic windows It is necessary to provide for the installation of blinds that are suitable in design, which allow you to create optimal natural lighting in the premises in any weather outside the window.
But for correct installation and selecting a design, you need to know how to measure blinds for plastic windows yourself.
This knowledge will help you save money on paying for the work of a construction team or purchase a more expensive model of blinds.
Choosing the right type of blinds
It is possible to take measurements for the installation location of the blinds and determine their dimensions only after the appropriate type has been selected, on which many nuances and measurement methods depend. Some people mainly focus on decorative properties and ease of use, which, in general, is correct, but it is worth noting the fact that the complexity of their installation can differ significantly.
Roman blinds are great for living areas of an apartment
Therefore, it is worth choosing designs that best satisfy all the design requirements of the room, but at the same time it is possible to install them yourself. Manufacturers offer the following types of structures for indoor installation:
- classic version with horizontal or vertical arrangement slats;
- roll;
- Roman curtains;
- pleated.
The first and second options are optimal and inexpensive, therefore, if there is no experience in measurements and installation, then they are ideal. Taking measurements for them is quite simple, they are undemanding to operate and are quite repairable. If you need to create unique design, then the other options will do.
Determining the mounting method
Before measuring the window, you need to decide on the method of fastening the structure being installed.
If you follow the instructions, you can install the curtains in a matter of minutes.
To do this, you can use the following recommendations:
- Vertical fastening can be done inside the opening or directly to the wall, depending on how the plastic window was installed.
- Vertical structures must be fastened in such a way that there is a minimum distance of more than 50 mm from the floor.
- If you plan to install blinds overlapping the window opening, then you need to be prepared for the fact that part of the window sill will be occupied by its structure.
- When attaching a vertical structure, the width is selected so that the canvas protrudes beyond the window by at least 15 cm.
Related article: Interior of a small bathroom (30 photos)
Fastening in the window opening should be carried out so that the window sill is not touched by the canvas, that is, it is necessary to make a height indent of 20 mm. It is necessary to determine in advance the opening direction of the blinds and select a mechanism.
The process of measuring the size of blinds for plastic windows
Steel tape allows you to take measurements with high accuracy
Measuring blinds correctly means choosing suitable tool, choose wisely necessary design and decide on a place for installation, and then perform necessary steps measurements.
It is important to measure all the necessary linear dimensions only using a steel tape measure, since only it can provide the required accuracy.
The use of other measuring instruments can subsequently create significant problems, since even 1 mm up or down is enough for this error to be visible throughout the entire life of the window.
Measuring the dimensions of horizontal or vertical blinds
Before measuring blinds for plastic windows, you should choose one of the methods for installing blinds:
- In the doorway. The method is effective for installation on fixed windows with non-opening sashes.
- On top of the opening. The implementation of the method is similar to the first case.
- On the window sash. The method is suitable for a single glass unit or a window with one glass installed.
- Inside the window.
Measurements for installing blinds in the opening
When measuring, take at least 2-3 width measurements to ensure accuracy.
Measure the blinds for installation in window hole can be done in the following order:
- We measure the dimensions with a tape measure window opening at several points (at least three) along each linear dimension to eliminate the situation with an uneven opening.
- If distortions in width or height are found, the smallest of the three values is selected.
- We subtract 10 mm from the width of the opening, and the height of the opening is equal to the height of the canvas.
- We take into account the presence of openable sashes and adjust the dimensions so that the window, when open, does not touch the rolled canvas.
- We take into account the location of the regulatory controls and make appropriate adjustments.
To select the dimensions finally and if you have any doubts regarding the measurements taken, it is recommended to make a sketch on a convenient scale and put all the structural elements on it.
Measuring the dimensions of blinds for installation over the opening
Installing the structure over the opening is very simple, since correctly measuring the required dimensions is quite simple and it is almost impossible to make any mistakes. Therefore, this installation method is one of the most common.
Related article: Brick gazebo
Blinds over the opening look beautiful and are a decorative element
The measurement process is performed as follows:
- We measure the window opening in width and height.
- To determine the width of the canvas, add 20 mm to the measured value.
- The height of the structure can only be calculated by adding 50 mm to the measured value of the opening height, which is what we actually do.
- We make adjustments to the position of the controls and the collapsed structure itself.
Taking measurements to install blinds between the sashes
Selecting the right size for blinds to install between the window sashes is quite difficult. Therefore, it is important to take correct measurements, the sequence of which is as follows:
- We measure the dimensions of the visible part of the glass inserted into the frame, excluding glazing beads.
- If distortions or irregularities are detected, we select a smaller size value and take measurements at several points.
- The dimensions of the canvas formed by the lamellas are determined by adding 10 mm to the height and width to the measured values.
- The selected size should take into account the location of the blinds when rolled up and not interfere with the opening of the window sashes.
Taking measurements for installation inside a window
Installing blinds inside a window is only possible if the window frames have the correct geometry and the blinds controls can be moved outside. That is, the plastic window frame must be specially designed for this type of blinds. In most cases, the window design does not provide for opening sashes.
The sequence of actions for determining the dimensions of the canvas is as follows:
- Using a tape measure, measure the height and width of the visible part of the glass, including glazing beads.
- We determine the presence of curvature in the plane of the frame and decide on the possibility of installing blinds.
- From the measured height of the window, we subtract the height of the structure for fastening the panel, which protrudes beyond the position of the upper bead. We add 30 mm to the obtained value and obtain the desired length of the blade.
- The width of the canvas should be equal to the measured width of the window along with the glazing beads.
Blinds are an excellent solution for the interior, beautiful and effective. With the right choice of model, material and color, they can elevate any room. When purchasing, be sure to take into account the correspondence of the blinds to the size of the window. How to measure window parameters for blinds and not make a mistake? How to correctly measure a plastic window for installation: You can take measurements yourself or call specialists from the store where you are going to purchase blinds. The main thing in this process is accuracy and precision. After all, an error in measurements can result in unnecessary costs of money and time. If you decide to take measurements for blinds on plastic windows yourself, this article is for you. How to correctly measure a window for blinds and not make a mistake? Observe the following rules: Horizontal blinds were the first light filters to enter the market of functional products for home and office. To this day, they cope excellently with all their tasks, easily outperforming their competitors. How to measure the opening for horizontal blinds on plastic windows? First, you need to decide on the installation method, which determines the dimensions of the canvas. There are three installation options: on the opening, in the opening, on the sash. In the first and second cases, the location of the control does not matter; it can be located either on the right or on the left. Mounting on the opening allows you to visually expand the boundaries of the window. This is an excellent design solution, including because if the measurements are taken incorrectly, the blinds can still be installed. Blinds installed in the opening are perfect for large windows. They will take up virtually no space and will be one of the most practical solutions for the interior. How to properly measure a window to install blinds in the opening? Mounting on the sash is the most convenient and provides maximum efficiency blinds as light filters. When opening the window, the blinds do not have to be rolled up, which makes them much easier to use; Also, with this fastening, the window sill is completely free, and flowers and interior details can be placed on it. So how do you measure under the blinds on the sash on plastic windows? Vertical blinds bring sophistication to the interior. If you have chosen the right material and color of the blinds, you can be sure they will fit perfectly into the room. Vertical blinds can be installed on the opening and in the window opening. The choice of installation option depends on your preferences and which method best reflects the design idea. Blinds will look excellent if their width is a multiple of 8 cm (for one-way opening) and 16 cm (for two-way opening). Mounting on the opening helps to hide the distortions of the window, cover the radiator and pipes. However, if you choose this installation method vertical blinds, you must not forget that the window sill and the radiator protrude from the common plane of the wall, and the blinds must be positioned so that they open without touching these parts of the room. So how to correctly measure the space for vertical blinds on the opening of plastic windows? By installing vertical blinds in the window opening, you can avoid making allowances for window decor if there is furniture in front of the window. Blinds that fit into the window opening do not interfere with the surrounding environment. However, remember that this mounting option is only suitable for a fairly even window, because all errors in the lines of the window opening will be very clearly visible when you install the blinds. How to measure the size of future vertical blinds installed in the opening on plastic windows? Roller blinds are compact and practical. They are rolled up and open form They don't take up space at all. Moreover, thanks to the existence different types fabrics, roller blinds can darken the room up to 100%. Roller blinds are installed on the wall, in the opening and on the sash. So how to measure roller blinds which will be installed overlapping on plastic windows? How to measure roller blinds for installation in an opening on plastic windows? As in the case of vertical and horizontal blinds, this method should only be used if your window is fairly level, otherwise all its defects will become visible. This method of attaching roller blinds will allow you to most effectively regulate the lighting in the room. Roller blinds are a modern and quite attractive way to decorate a window. The products combine the simplicity and convenience of blinds, as well as the aesthetics of conventional curtains and curtains. The variety of materials produced in Holland, Belgium, Poland, Germany, Turkey makes it possible to satisfy any design whim regarding the texture, color and density of the material. However, not everyone knows how to correctly measure roller blinds for plastic windows. Roller blinds easily regulate the lighting in your home. They can completely darken a room or gently diffuse light. Main advantages of the products: Products do not require special care, but it is advisable to treat them with care. By appearance There are curtains of open and closed types. They consist of fabric and a shaft. The open shaft is usually attached to the top of the window (sash) using brackets. The types of fastening depend on the size and area of the window; brackets of larger and smaller sizes are used. Small brackets (mini system) are usually installed on the window sash, large ones - on the frame or window opening. The fabric is wound onto the shaft. Roller blinds open type controlled by a chain mechanism. A decorative strip is installed at the bottom of the fabric, thanks to which the fabric does not sag and is evenly wound. Can be used to secure the product (especially when opening a window). magnetic fixation. With magnetic fixation, an open-type product is fixed using magnets and metal plates (in several places). Fixation on a fishing line occurs along the entire height of the curtain, so it is more practical and effective than magnetic fixation. Roller blinds closed type consist of fabric and a shaft, but the shaft is placed in a plastic or aluminum box, and guide strips are placed along the edges of the fabric, which perform the function of fixing the fabric. Closed-type products are very suitable when you do not plan to use tulle and curtains - for example, when decorating a balcony or loggia. Thanks to the refinement of the aluminum frame, the effect of completing the window design is achieved. Guides for closed products eliminate the possibility of light penetration between glass and fabric, thanks to which you can achieve complete darkness of the room. Closed-type products can have flat and U-shaped guides. To add even more sophistication, closed-type products can be equipped with decorative chains of different colors. In order for roller blinds to have an aesthetic appearance and high practicality, you need to understand how to measure correctly. Roller blinds are divided into several types, and each has its own characteristics of taking measurements. To correctly measure curtains that will subsequently be used for plastic windows, you first need to find out exactly where the roller blinds will be mounted. They can be attached to the window frame itself or on the window opening. What measurements need to be taken: Each type of roller blind has its own acceptable dimensions. They directly depend on the type of material from which they are made. The control length cannot be less than 2/3 of the finished product. Fastening directly to the window opening: Uni-1 cassette roller blinds are measured as follows: Uni 2 must be measured very carefully. The location of the fittings on the plastic window is of great importance when taking measurements: Determining the size of roller blinds according to the Mini type: The following locking options are available: There are several ways to attach a curtain rod: First, you need to decide where exactly this curtain will be located. Such a curtain can also be installed on a metal-plastic window or on the window opening itself. You need to be very careful when taking measurements during internal installation. To determine the size of the Roman model, you need to take measurements “H” and “B”. Using the measurements taken, carry out the necessary calculations: This type of curtain can also be installed on metal-plastic frame or on a window opening. When it comes to Day-Night curtains, you need to calculate the following: add 1.5 cm to “B”, 15 cm to “H”. If the curtain is attached directly to a metal-plastic frame, measurements are taken in three places “B” and three places “H”. We take the smallest values as the height of the opening. If there are corner slopes, measurements are taken from the place where the curtain will hang in the future. “B” is equal to “B” of the window opening minus 5 mm. “N” equals “N” of the window opening. For allowances on the frame, measurements of the bead height and width are used window frame. The distance between the curtain and the handle on the window should be approximately 1 cm, you can mark it on the fabric. It’s worth trying on as carefully as possible. To learn how to correctly measure roller blinds for plastic windows, see the following video.
The most practical way to position the control system is so that the cord does not collide with the window handle during operation. The length of the lace of the mechanism is set at the request of the customer. It is very important to take correct window measurements when choosing roller blinds, especially if they are fastened with self-tapping screws. The products are completed with a box for the upper part and guide elements - at the request of the buyer. If the curtain box is decorative, it is secured with special fasteners. Measuring roller blinds for plastic windows is not at all difficult. You need to follow the advice of experts, and you will do all the calculations as quickly as possible. The main thing is maximum care; you need to measure very carefully. In this case, the result will not disappoint you - the curtains will fit the window opening just perfectly. Blinds will prevent penetration well sun rays into the house, if their dimensions strictly correspond to the size of the window. Measurements must be made carefully in compliance with a number of rules. The most accurate measurement result can only be obtained using a steel tape measure. Horizontal and vertical measurements are taken in several places to take into account possible window distortions. If this is not done, the blinds may subsequently jam when moving. Each type of blinds, roller, vertical and horizontal, has its own characteristics that must be taken into account when taking measurements. They are attached in one of two ways: on the opening, in the opening or on the sash. In the first case, the blinds are attached to the ceiling or wall and cover the window by a few centimeters. It’s not scary if their width and length exceed the dimensions of the opening. By the way: by installing blinds in this way, you can achieve a visual enlargement of the window. After a horizontal measurement, add 1-2 cm or more, after a vertical measurement, add 5 cm or more. Measurements are taken in 3-4 places and the maximum value is taken. By attaching the blinds directly to the sash, the window can be opened and closed, and the useful area of the window sill can be used to accommodate indoor plants or decorative items. Measure the sash from the inner boundaries of the opposite beads. This is the name of the inner edge of the frame that is in direct contact with the glass. Several measurements are also taken horizontally and severally vertically, and the maximum values are taken as a basis. 1 cm is added to the width and 3 cm to the length. Important! The control mechanism is located on the opposite side from where the handle is located. Vertical blinds are mounted on the opening or in the opening. The first option allows you to make them decorative element interior, cover the heating radiator, mask the distortions of the window. Sometimes the width of the window sill exceeds the width of the window. If the projections are more than 6 cm on both sides, the blinds should be equal to the width of the window sill plus 10 cm. The distance to the bracket on which they will be attached is added to the vertical measurements of the window. The bracket can be installed on the ceiling or wall. The option of placing vertical blinds in the opening is chosen by the owners of small rooms where the space under the window is occupied by furniture. However, in this case it is important that the window does not have distortions, or they are minimal. Subtract 2 cm from vertical measurements, and 1 cm from horizontal measurements. Many people are sure that roller blinds or Roman blinds can only be attached to a frame. In fact, it is also possible to attach them to the wall - overlapping. When installing with an overlap, vertical and horizontal measurements of the window opening are taken. Add 20 cm to vertical ones and 10 cm to horizontal ones. Installing Roman blinds in an opening does not require any pros and cons when measuring. The height and width of the window are the dimensions of the curtain. However, you should make sure that the window is absolutely level. Otherwise, it makes sense to consider the option of placing overlapping curtains. The living room in the house is one of the important rooms. It welcomes guests, and also spends time relaxing, watching TV and much more. There are options when the living room is connected to a work area or kitchen. Blinds have been popular for a long time. Behind last years There have been changes in the production world of lamellas that have led to the emergence of design solutions for arranging windows of apartments and cottages. This is a universal product for window decoration that does not lose its relevance over time. Many people use it, but few know for sure how to correctly measure for installation. The designs are different production materials, forms, mechanisms of operation, external data, functional qualities. The direct function of the lamellas is to adjust the light flux. They let in and create a barrier to too bright light. A characteristic advantage of blinds is that they do not interfere with frequent ventilation. Do not deform under the influence of fresh air flow. They are easy to care for and do not require additional cleaning products. To obtain the most accurate results, use an iron tape measure. Don't try to round numbers. Consider everything down to the millimeter. To correctly determine the size, first measure the width and then the length of the window. If you are taking measurements on old Soviet windows, you should measure each window sash separately. Measure all parameters in different places. There may be chips on the windows, which should also be taken into account. As a rule, the assortment of construction markets offers three main types of blinds: horizontal, vertical and woven roller blinds. Horizontal blinds are popular among the population. This is due to the fact that they occupy less space rather than vertical, so they are suitable for a balcony or loggia. The structure is not massive, it is mounted by drilling. They are made from thin logs of wood: cherry, beech, oak, yew. Regardless of the type of wood, such blinds look elegant, especially if the double-glazed window of the loggia is wooden. Additionally, the models are painted with a layer of paint, thanks to which they shine characteristically in the sun. To take measurements for a horizontal structure, first decide on the installation method. In order to install the structure, it is necessary to measure the length and width of the glass unit. When purchasing a model, add + 1 cm to the length and + 5 to the width. Installation horizontal blinds on the sash assumes: You can clearly see the measurements in the photo below: Vertical blinds are made from fabric, polyester and plastic. The materials are pre-treated with special dust-repellent and antistatic agents. They are easy to care for and clean from dust. In addition, the market offers models made of aluminum. Such structures are heavier than woven or bamboo, but are wear-resistant. The only drawback of the designs is their size. On small balcony vertical slats look out of place. Vertical structures are attached to the opening and into the opening. To evenly cover the entire window area with slats, the area on the sides must exceed eight centimeters. Thus, the double-glazed window looks harmonious. When installing on an opening or to the ceiling, we add to the height the area from the ceiling to the window or from the opening to the window. A more detailed measurement mechanism is shown in the photo: Roller blinds – practical option in terms of installation and measurement. They are installed on the wall and to the glass unit. The most popular woven pattern is the zebra system. When measuring, add 1 cm to the total height of the window. The curtain is one solid sheet with a box at the top. When open, the fabric hides in it. Using mounting tape, the box can be easily attached to the double-glazed window. To do this, glue double-sided tape to the structure, which you then press against the window. Before attaching the curtain rod with tape, be sure to degrease the surface of the window. Make sure that the curtain is attached evenly and perform installation strictly according to the markings. The rest of the fabric roller shutters are installed in the same way. More detailed instructions You will find installation and measurement instructions in this video:
What important features of window measurements and ordering are worth knowing?
Each type of blinds requires a specific approach and a specific measurement technology
Measurements for horizontal blinds
How to correctly take window measurements to install horizontal blinds on the opening?
Measurements for installing horizontal blinds in the opening
Measurements for installing horizontal blinds on the sash
Measurements of the window sash should be carried out along the boundaries of the glazing bead
How to measure a window opening for vertical blinds?
Window measurements for vertical blinds mounted on the opening
Measuring a window for installing vertical blinds in the opening
Measurements for installing roller blinds
In any calculations for roller blinds, add 0.5 cm to the height to take into account the cornice
How to measure a window opening for installing roller blinds on the wall?
Window measurements for installing roller blinds in the opening
Window measurements for installing cassette roller blinds
Peculiarities
Main types
Open type products
Closed type products
Window measurement
Classic version
Cassette
Roman
"Day Night"
Subtleties in calculations
Nuances of measurements
Rounding of numbers to whole centimeters is not allowed. Every millimeter matters.
Before you buy blinds and when placing an order, first write down the dimensions of the horizontal side, then the vertical side, in the invoice.Horizontal blinds
Installation in the opening involves placing the bracket at the top of the frame. Measure the height and width of the opening. subtract 2 cm from the height and 1.5 cm from the width.Vertical blinds
Roller blinds
The conclusion is the following: measurements for installing blinds are not difficult, given the installation method. But if you lack experience, it is better to entrust this work to specialists.
Important information about correct measuring procedure
How to measure a window to install horizontal blinds
Measurement for a standard window How to measure for vertical blinds
Measuring vertical blinds 
Measuring vertical slats
