An ottoman is certainly a necessary thing in the house. But there is no particular need to buy it, since it is really easy to make it yourself. For this procedure, it will be possible to use various home materials and some tools. To learn how to make a round ottoman with your own hands, it is worth considering some practical advice from experienced professionals, studying which you can come to the conclusion that anyone can do it.
The network has a huge number of options for how you can make a pouffe with your own hands. Thanks to independent actions, you can save a significant amount of money and use improvised materials. The most popular ways are as follows:
- seat out plastic bottles;
- ottoman from a bucket;
- from a cable reel.
Pouffe from plastic bottles
The option of plastic bottles is quite popular, since almost every house has them, and there will be no problems with the source material. In addition, the bottles are quite strong and durable. To make such an ottoman in the hallway, you will also need adhesive tape, foam rubber, thick cardboard or plywood and upholstery fabric.
It is important that the bottles are the same both in size and shape, and in density. Their number depends on how voluminous the pouf you want to make. But remember that the seat will be stronger, the larger the area of \u200b\u200bthe top.
Place the bottles upside down and tie them tightly with duct tape. According to the resulting diameter, cut out four identical circles from cardboard or plywood. Two will go to the lid, and two will go to the bottom. So the design will be stronger. They also need to be attached with tape. This is the preparation.
Bottles are connected to cartons with tape
Now you need to make it soft. To do this, cut a piece of foam rubber of the desired size and wrap the side of the ottoman. Cut out a circle for the top. Foam rubber can be replaced with synthetic winterizer. The thicker the layer, the better. Glue the material to the workpiece.
The surface of the resulting frame is covered with synthetic winterizer or foam rubber
The seat trim can be made of fabric, leatherette, decorated with ruffles and appliqué. A knitted cover will make the ottoman unique. Using your imagination, you can create what you like best.
Another option is 2 large 10-liter plastic bottles. At one (lower) you need to cut off the neck and insert another into it. Stitch exactly the same soft material and put on a cover.
Ottoman from plastic bottle We cut one bottle and combine it with the second. For the base and seat, cut out circles from chipboard
Foam rubber for our ottoman We fasten the foam rubber on the seat We fasten the foam rubber on side surface
For the bottom, a leatherette circle is suitable. We make a cover from the material you like and pull it over the ottoman
From a bucket
Bucket ottoman
You can also make a pouffe with your own hands from inventory that is no longer used for its intended purpose. It can be, for example, an old leaking bucket. The principle is the same. Turn the bucket upside down, cover it on the sides with batting or synthetic winterizer.
Glue the foam to the sides
Put a suitable round model up. Soft material can be glued on for a more secure hold.
Glue the foam to the lid
Remove the handles from the buckets in advance, otherwise they will interfere.
We sew a cover
Sew a cover from a pleasant to the touch material and put it on the seat.
We put on a cover
A similar design is obtained by using a cable reel. In a word, if you want to make a round original ottoman with your own hands, you can take any blank and cover it with soft material. A piece of furniture made in this way will not only free your house from trash, but also save money.
From chipboard and plywood
Cylindrical ottoman
And below is a step-by-step guide on how to make an ottoman from scratch using only the right materials and your skill. Such a product will look beautiful and noble in a city apartment. So, you will need:
- Chipboard about 18 mm thick;
- plywood (3 mm);
- wooden blocks for legs;
- self-tapping screws;
- synthetic winterizer;
- upholstery fabric;
- staples, glue and thread.
First you need to cut out two identical circles. They will serve as the base and top of the pouf.
Cut out chipboard circles the right sizes and bar details
Then between them put the bars of the desired height and attach with self-tapping screws at the same distance.
We connect circles and beams with self-tapping screws into a frame
When the frame is ready, cut a sheet of plywood to sheathe the side of the product with it.
Fasten to the frame around the perimeter chipboard sheet making a wall
Using a stapler, nail the strip at the top and bottom to the chipboard.
Fully anchored wall
Now you can glue the workpiece with soft material. Upper layer must be thick in order to sit comfortably on the pouffe. 5 centimeters will be enough.
Fastening of foam rubber and synthetic winterizer
Sew a cover from any upholstery material. It can be eco-leather, dense fabric.
Finished case
You can attach it to the frame with staples or glue.
We put on a cover and fix it from below with a stapler or nails
If desired, make legs for the ottoman.
We fasten the legs
As you can see, to engage in the manufacture of such a simple home furniture completely easy.
Ready product
To do this, you only need a little ingenuity, improvised materials and tools, and a suitable idea. Considering how much finished furniture costs in stores, you will understand how profitable it is to be able to do something with your own hands. In addition, you can be truly proud of your poufs, because you have invested in them not only work, but also your soul.
It is very practical to have a round ottoman in home interior. You can make such an ottoman with your own hands, but you will need a special tool. The manufacturer is not responsible for the quality of work.
For the production of an ottoman, materials will be required:
- Chipboard or plywood sizes 16, 18 mm;
- Wooden pine beam 20 × 40 mm, but there may be other sizes;
- Self-tapping screws 45 mm long, they fit best in size;
- Fiberboard 3.2 mm, 2.5 is possible;
- Foam rubber 40 mm, 1 mm: density 25;
- Sintepon 10 mm, possibly thinner;
- Leatherette (eco-leather), or fabric, genuine leather;
- Interlining;
- Odorless glue;
- Threads;
- Staples or nails.
After the procurement of materials, we proceed to the production of an ottoman
- First, cut out the bottom of the pouffe. For this, two halves of a chipboard are taken, two circles are connected and cut out. The seat is ready.
- For the manufacture of legs, we cut a pine beam 45 cm long, 7 pieces.
- On two circles, we evenly mark places for attaching 7 beams. We drill 2 holes on one beam. With self-tapping screws, 45 mm long, we connect the legs with circles.
- A small frame came out.
- We cut the fibreboard into 2 parts according to the height of the ottoman.
- The plate is fastened with 16 mm brackets along the bars, as well as along the bottom and top around in a circle.
- The frame is ready. We begin to upholster the ottoman.
- First, we smear the top of the pouffe with ALIMP glue. ECO glue "and glue the foam rubber 4 cm thick. Then we lubricate the sides and glue the foam rubber 1 cm thick.
- Further, the entire soft surface is sealed with synthetic winterizer.
- From leatherette we cut out the upper part of the pouffe according to the size of the chipboard, as well as the sides and sew on sewing machine.
- We pull the finished upholstery onto the pouffe. The bottom is fixed with a staple gun.
- Flizelin close the bottom of the pouf.
- We fasten the plastic legs with a screwdriver and 3 cm wood screws.
Cut the chipboard to the desired diameter. A beam of the desired height, depending on the required height of the pouffe.
We upholster fiberboard around the perimeter.
To align the folds on the upholstery material, we use a synthetic winterizer.
Apply with a spray gun or just by hand.
Foam rubber thickness from above - 4 cm
We put on a cover and hammer it with a stapler or nails.
Screw on the plastic legs.
The round pouffe is ready.
In order to have a new comfortable and original piece of furniture in your home, it is not at all necessary to go to the store and spend a lot of money. Of course, it’s better to buy a sofa or a bed, but it’s not difficult to make such an interior detail as an ottoman with your own hands.
In addition, if you decide to start making an ottoman, you can make it the one that best suits your design.
It will be possible to choose desired shape, material and color. However, this is not the only advantage of homemade ottomans, since its manufacture may cost nothing at all.
Soft puffs
The easiest way is to sew frameless yourself soft pouf ik. To make it, you only need a piece of fabric, stuffing material and a sewing machine.
Although if there is none, then it is quite possible to do without it by sewing all the details by hand. In order for your ottoman to be even and look beautiful, you need to make a pattern out of paper. It should be a square, at the ends of which triangles will be located.
According to this template, it is necessary to cut out 8 identical parts from the fabric, not forgetting to leave allowances for the seam. Moreover, you can use both one piece of fabric, and materials of different colors and textures for each of the parts cut out according to the pattern.
After all the details are ready, you need to stitch them together to form a figure similar to a ball. And in order for the ottoman to be stuffed, bend the top on the triangle of each of its parts inward.
Filler
In order for the pouf to keep its shape, a synthetic winterizer or foam rubber is well suited. But other materials can also be used. As such, even scraps of fabric are suitable.
To give the ottoman a finished look, you need to close the remaining hole by sewing a circle of material with finished edges. If the edges of a round part are difficult for you to process, then it can be cut in the shape of an octahedron.
You can simplify the task and sew a pouffe from two round parts that will be the top and bottom of the product, and two rectangular parts that are the sides of the pouffe.
The height of the ottoman can be adjusted by the width of the rectangle. But the length should always be equal to half the length of the cut circle.
By sewing rectangular parts, stitching a circle to them and filling them with filler, you can get a round ottoman that will be soft and light. It will become not only a practical piece of furniture, but also a wonderful toy for children, which is impossible to get hurt.
A cube-shaped ottoman is made in the same way. In this case, instead of two rectangular parts and two circles, you will need 6 squares. Making a cube out of them is not difficult. And if a hidden zipper is sewn into one of the faces, then it will be possible to change the filler and wash the cover.
Pouffe from plastic bottles
An ottoman can be made with your own hands and from plastic bottles. They, of course, must have the same volume.
To do this, the upper part of the bottle, where it begins to narrow, must be cut off and put on the part left without a cap on another bottle of the same type. Repeating this procedure with other bottles, we form a round design of them.
In order for the bottles not to deform and the pouffe not to lose its shape, we fasten them with adhesive tape.
A little trick is that a bottle inside other similar ones, fastened with ordinary transparent tape, can be pasted over with double-sided tape and glued to inside the rest of the bottles.
Note!
In order to close the upper and lower areas, it is necessary to cut a circle from cardboard or chipboard according to the diameter of the connected bottles. We glue foam rubber to these circles, and wrap the pouffe outside with it.
It remains only to sew a cover for the finished ottoman. On the circle of its upper part, you can sew a zipper.
Such furniture will save filler. And if the cover is made of raincoat or water-repellent fabric, then such furniture can even be placed on the street.
In addition, as you can see in the photo, round ottomans made without a frame and containing plastic bottles inside, appearance practically do not differ.
Pouffe with cover
In order to make a pouffe similar to those sold in stores, carpentry skills and some tools are needed. To begin with, it is worth cutting out 4 rectangular parts from chipboard 33 wide and 40 cm long.
Note!
Use wooden blocks to fasten them together. A square with a side of 40 cm is attached below. As a result, you should get a kind of box.
This blank from the inside with the help construction stapler can be sheathed with material. The square, which will act as a cover, is also sheathed with material from below. And the top, before being covered with upholstery fabric, is pasted over with foam rubber in order to give the ottoman softness.
Along the entire outer perimeter, the pouf, like the lid, is wrapped with foam rubber. And only then upholstered with material. Loops are used to attach the lid to the cube. To give this piece of furniture mobility, you can attach furniture wheels to the bottom.
It is even easier to make an ottoman with a lid from a bucket, large pot or other utensils and equipment.
The main thing is that, like a pouf, they have a removable or opening lid. Then you just need to wrap the workpiece with foam rubber or other soft material and put a cover on it.
All homemade ottomans can perfectly fit not only into the interior of the apartment, but it is also a great option for giving or outdoor recreation. After all, ottomans are light, mobile due to their size and comfortable pieces of furniture.
Note!
They are very suitable for children's rooms, giving the kids the opportunity to comfortably sit on them, or even build castles using pouffes as blocks.
It is much more convenient to use such a piece of furniture to sit down at a low coffee table, because a homemade pouffe can be made of any height.
DIY ottoman photo
The question of how to make an original ottoman with your own hands is of interest not only to experienced needlewomen, but also to novice craftsmen. And not in vain, because it affordable way update the furniture in the living room or hallway, while spending mere pennies. The task is greatly simplified by the fact that on the Internet you can find a lot of step-by-step instructions on how to sew a soft pouffe with your own hands from unnecessary things and improvised materials. Such home workshops are especially relevant for students and young families whose budget does not allow them to get hold of brand new furniture.
How to make an ottoman at home?
In fact, making an original pouffe yourself is not so difficult - a little effort, a bunch of unnecessary old things and a bit of inspiration will be enough. Making a drawing of a future creation yourself is quite problematic - it requires basic drawing skills and knowledge of the basics of geometry. Of course, we all once learned this at school, but we have already forgotten a little. In this case, drawings, assembly diagrams and calculations for materials will serve as a lifesaver.
Based on them, we make templates on paper, which are necessary for subsequent work on the pouffe. But since we are working on the manufacture of designer furniture, you can easily adjust the dimensions for yourself.
The next step will be the preparation of patterns. When transferring each detail to the fabric, do not forget to make allowances for the seams, otherwise the product will turn out to be much smaller than desired.
By the way, it is not at all necessary to cut out each part of the future product from the fabric - you can crochet it. There are also ways to make a homemade pouffe without a preliminary drawing and paper templates.
How to choose a ottoman model?
There are many different techniques, thanks to which you can make a beautiful and functional pouffe with your own hands. It is not surprising that it will be quite difficult for an inexperienced needlewoman to decide on the model of such a product and the method of its manufacture.
First you need to decide where you plan to place your future masterpiece. If in the hallway, then you should look at the frame models with legs in classical style- they will not only decorate the interior, but also cope with the "direct" duties assigned to them.
Pouffes with a rigid frame will also be appropriate in the corridor, but soft models are quite suitable for the bedroom.
An ideal option for a children's room is a voluminous bag with which it will be quite convenient for children to mess around.
As for the technique of execution, then focus on your strengths. If you are good with a sewing machine, then pay attention to round soft models.
Are you good at knitting? Look for crochet patterns for poufs.
Well, if you are a fairly experienced needlewoman, then you can also aim at a model with a carriage tie and a drawer that will perfectly fit into your interior.
If you wish, you can also make miniature copy armchairs, making a classic square ottoman with a back and removable pillows.
With all the variety of models and forms, given subject the interior will not be great work to do for those people who do not have experience in furniture design. Of course, a pear-shaped bag is much easier to make than a leather bedside pouffe with a storage box for small items, however, both options can be made by a novice master.
First, try to make a simple frameless ottoman for a sofa, which requires a minimum of details, knowledge and experience, and only then proceed to more complex models.
DIY wooden ottomans
Unlike simple frameless forms, with wooden product you will have to get confused, both with the selection of materials and with the choice of model. Frame products have two main shapes - angular and rectangular. The first will be preferable for small spaces, as it will help to use the corner and make your interior more functional. This is especially true in a small hallway or narrow corridor- here large forms such as a ball will simply take all the free space.
Looks very organic in the living room wooden models, stylized as chests or animals (a white leather hippopotamus will become a real decoration of your home).
When choosing a model, make sure that it fully matches the original style of the room. This means that in a loft interior, an exquisite ottoman with a capitonné carriage screed will look a little ridiculous. The same can be said if an ultra-modern 5 in 1 transformer on wheels is placed in a classic living room. The color scheme should also be compatible - in the “sky” interior (in blue and blue tones), light green furniture “cuts” the eye a little.
The wooden frame for the ottoman has another advantage - spaciousness. If you have a small hallway, then you can make a folding pouf-bench, which in combination will serve as a large and roomy shoe rack.
Do-it-yourself bottle ottoman
The product from plastic bottles has several advantages at once:
- light weight - the average weight of one piece of furniture does not exceed 2 kg;
- profitability - the main part of such furniture is household waste and unnecessary old things that cost practically nothing, so you only have to pay extra for upholstery fabric;
- environmental friendliness - such needlework is considered waste disposal and contributes to the conservation of nature.
You can make ottomans from ordinary bottles, and from plastic eggplants, the main thing in such work is to fix the plastic filler well with adhesive tape, otherwise the product will be loose. For the stability of your pouf, it is also worth cutting out the bottom and lid from thick cardboard and also fixing them with adhesive tape. Next is to make a fabric cover and New furniture ready.
Do-it-yourself chipboard ottoman
As mentioned earlier, wooden models are quite practical and durable. If you don't have on hand natural wood, then you can also use wood chip boards. This material is perfect for making furniture. It makes roomy pouffes with a lid and soft upholstery. However, when choosing such a material, one should not forget about safety - use only ecological chipboard for furniture, which does not contain formaldehydes hazardous to health.
Do-it-yourself ottoman from improvised materials
Experienced needlewomen know that you can make exquisite creations from any unnecessary material. If you are an avid motorist, then you probably have a whole collection of unnecessary tires in your garage. From tires and tubes that you absolutely do not need, you can make several ottomans and a coffee table. To create such an ensemble, you will also need two round pieces of wood and a cover made of foam rubber and fabric. wooden details you can notice plywood elements.
Are you a fan or admirer of classic furniture? Beautiful ottoman in this style can be made from an old stool, foam rubber and leather upholstery. From these simple components, an interesting classic model with short legs and a soft seat is obtained.
If you want a beautiful round ottoman, then it can be made not only from a wheel, but also from an ordinary plastic bucket. For it, you will also need foam rubber, any upholstery fabric (you can use old jeans), a cardboard or rattan cover.
Interesting interior items are also obtained from pompoms. They can either be soft or have a rigid frame made of slats. This furniture is upholstered thick cloth, and on top it is sheathed with pre-prepared pompoms and thick threads for knitting.
You can make furniture for the country from pallets. To do this, you must fasten several wooden pallets and cover them with a soft seat made of fabric and several layers of foam rubber.
Country furniture is generally quite unpretentious in execution, so it can be made from plastic pipes, from an old suitcase, from a rope, and even from a wooden coil that remained after laying the cable.
Do-it-yourself children's ottoman
Making furniture for a child is a real pleasure, because there are practically no restrictions on shape, style or color. Pear, apple, ball - you can use these shapes when sewing children's puff bags.
Don't forget about your pets too - they will also appreciate upholstered furniture in handmade style. You can make an ottoman for a cat with your own hands quite quickly from fabric shreds and filler. However step-by-step instruction the manufacture of such a product for a cat is slightly different from the usual version. Cats are very fond of hiding, so make sure that the pouffe resembles a cozy mini-house. To do this, simply make a horizontal hole in the base. But the furniture for the dog does not need to be adapted - the "human" version will also suit it.
When old interior already bored, and I want changes, it is not necessary to start repairs. Various additional items can change and revitalize the interior. Do not immediately go shopping in search of something new and unusual. Do not forget that with your own hands at home you can create many masterpieces. One of the practical and interesting things in the room is the ottoman. It comes in all shapes, sizes and colors.
You can enter it in any of the rooms and in different styles. If you are thinking about how to make an ottoman with your own hands, you will need a few useful ideas on this account. But the main advantage of such an object lies in wide choice materials to create.
Multicolour fabric ottoman
Sewing a bright ottoman from fabric is not a difficult task.
Before starting work, prepare:
- fabric of different colors;
- lining fabric;
- filler;
- sewing machine;
- a needle and thread;
- 2 large buttons.
As a filler, you can take a synthetic winterizer or thick foam rubber. Then the pouf will turn out to be moderately soft and will keep its shape.
The first stage of work is a pattern. Draw a circle on paper the size you want the pouf to be. Divide this circle into 12 equal parts. Do you have fewer colors? You can alternate them or make a division into 6-10 parts. Ready patterns applied to the fabric and cut out triangular patches. Cut them out with a margin that will go to stitching. The fabric for the lining is cut in the same way.
The next step is stitching. Grab the petals of the circle between each other with threads on the sides, and then sew them on the sewing machine. You should get two round multi-colored bases - the top and bottom. They need to be sewn from the inside out with high quality. Leave one piece open to fill the pouffe.
The final step is filling. Place inside the case required amount filler. The pouf will immediately become voluminous. There should be a lot of synthetic winterizer or foam rubber so that the pouffe does not significantly change shape when pressed. Carefully sew the last piece. And close the place of stitching the petals in the center of the circles with large buttons. Do-it-yourself multi-colored pouffe is ready.
Plastic bottles as a basis for a pouffe
Plastic bottles have many uses in everyday life. When a considerable number of them have accumulated, you can make an ottoman with your own hands.
You will need:
- about 40 pieces of bottles with caps;
- soft foam lining;
- cardboard;
- wide tape;
- cover fabric;
- needle, thread.
Take bottles with tightly screwed caps and use tape to connect them to each other so that they form a filled circle. Cut out 2 circles from cardboard. Their diameter should match the diameter of the bottom of the glued bottles. Tape the cardboard tightly to the plastic containers with tape. The frame for the ottoman is ready.
Then you should prepare the foam for the lining. 3 blanks are cut out: 2 circles of the same size with cardboard blanks and 1 rectangle. It will wrap around the ottoman vertically. You can fix the workpieces with threads or a construction stapler. It remains only to sew a cover for a pouffe from the desired fabric. This is not difficult if you have minimal sewing skills. A cute do-it-yourself ottoman is obtained quickly and cheaply.
Non-standard use of a plastic bucket
An old unnecessary plastic bucket can easily turn into a useful and beautiful thing- in an ottoman.
For the ottoman you will need:
- jute rope or rope;
- building glue gun;
- cardboard;
- textile;
- stapler;
- big button;
- microfiber cloth.
A bucket without a handle should be turned over and tightly wrapped around with a rope. When winding, each stitch must be planted on glue so that the rope subsequently sits tightly.
When the task is completed, you can begin to build a soft seat for the pouffe with your own hands. Take the cardboard, attach it to the ottoman and cut out a circle from it the same size as the bottom. It is also necessary to cut a circle from the fabric, but with a diameter larger by 10 cm. Connect the fabric to the cardboard in the middle with a button. Roll the microfiber into a tube and start wrapping it between the cardboard and the fabric around the button. Use a glue gun to fix. Wind the fabric until you reach the edges of the cardboard. Attach the top fabric with a stapler to reverse side cardboard. The ottoman is ready, it remains only to connect the lid and base with glue or Velcro tape.
Functional ottoman with a box inside
The task becomes a little more complicated if you want to do it yourself and use the ottoman as a place to store things. Having a ready-made box will greatly facilitate the task. But it is also possible to do it yourself.
Prepare for him:
- 4 rectangles of chipboard of the same size. They will be the faces of the pouf;
- 2 squares of chipboard for the base and cover;
- wooden blocks for fastening and small legs;
- screwdriver and screws.
If you do not have the skills of a carpenter, then it is better to ask for help in collecting the box from a more experienced and strong man. Assemble the structure from the parts, use self-tapping screws and glue to fix.
The seat is not attached to the ottoman, it must be freely removed and put on. So that during operation the seat does not move out, stops are attached to it on the inside. It is necessary to attach the stops at such a distance that when removing and putting on the cover, they do not rub against the edge of the chipboard and do not touch the bars inside.
The frame of the box must be covered with a cloth, you can fix it with a stapler. Inside the box is sheathed too. Thick foam rubber should be laid in the cover under the fabric for comfortable seating. This is how it turns out a practical ottoman with legs that will fit into any style of interior. You just have to choose the right fabric.
Video gallery
