Do-it-yourself hanging stand for glasses. DIY kitchen ideas. What material is the most reliable

Dremel offers a versatile hanging wine cabinet for wine storage.

What you need:

— wooden slats;
— 1 wooden block;
- multifunctional tool (here Dremel 4000);
- sanding attachment (430) 6.4 mm, grit 60;
- cutting disc for wood (SC544);
- universal drill (561);
— universal kit for cutting (565);
— glue gun(here Dremel (930));
- screwdriver;
- screws;
- dowels;
- self-tapping screws;
- metal chain

Step 1

To make the component parts of the shelf, cut a block of wood into several pieces. The back and front of the shelf should be 50 x 2 cm, and the sides should be 25 x 2 cm. To do this, use the Dremel 4000 Multi-Tool with Wood Cutter (SC544). Sand the edges of the workpieces with the Dremel 4000 and the Dremel sanding head (430), 6.4mm, 60 grit.

Step 2

Take wooden slats and cut them into 12 even pieces (you will need 2 coasters for each bottle). Each blank must be at least 22 cm in length. To make these stands, use your Dremel 4000 with a wood cutting disc (SC544).

Step 3

Take the front and back of the wine rack blanks and mark on them where the slats will be placed. Place pencil marks along the entire length of the finished front of the shelf - you will need them to cut the cuts for the bottles. In order to make it more convenient to place the bottles on the shelf, cut out semicircles in which the containers should fit. Use your Dremel 4000 and the Universal Cutting Kit (565) to get the job done. Sand the edges of the semi-circles using the Dremel 4000 Multi-Tool with sanding pad. Dremel nozzle 6.4 mm, grit 60 (430).

Step 4

Secure the rails at the marked points using the Dremel Glue Gun (930). To complete the work on the shelf, it remains only to fasten all its parts with screws. Make holes in component parts shelves and install metal corner brackets in them. Then screw in the 25mm screws and tighten them with a screwdriver. To make the wine rack even more convenient, you can install a lattice for hanging glasses on it. To do this, you just need to screw a metal grill with a screwdriver reverse side shelves.

Step 5

in the corners front side screw the self-tapping screws into the wine shelf. Attach a metal chain to them - with its help you can place the shelf anywhere in the kitchen.

Step 6

Now it only remains to choose a good place to hang crafts on a chain. To secure the wine cabinet, measure the distance between the self-tapping screws. According to it, make four holes in the ceiling using the Dremel 4000 and the Universal Bit (561), then insert the dowel and screw in four additional self-tapping screws. Hang a shelf.

The bar table, if it is in the kitchen, is statistically used even more often than the dining table. When purchasing a bar counter, think in advance what accessories you will need, do you need a hinged bar system, central and side shelves, or will it be enough to hang a small cabinet?

Pros and cons of equipping a bar counter

Accessories for a bar counter in the kitchen have their pros and cons.

Pros:

This perfect solution if there is not enough space to store things;
the central and side shelves are very convenient and functional to use.

Minuses:

the need to regularly dust bottles, glasses, appliances;
a large number of accessories overloads the space, the owners need to be especially careful with filling the rack.

Types and types of bar counter equipment

Accessories and fittings are different in terms of fastening method, shape, materials and purpose.

According to the method of attachment, we can distinguish:

Central shelves for the bar, which are mounted on the pipe in the center;

Side or rotary shelves, which are attached to the pipe to the handle that extends to the side;

Suspension systems that are not attached to the bar and pipe, but to the ceiling.

The shape of the central and side shelves are cone-shaped or round.

According to their purpose and functions, bar accessories are divided into:

Holders for glasses;
Bottle holders;
Universal - for storing things, dishes, food and serving;
Hangers for cutlery, mugs, napkins, etc.

Accessories and fittings are most often made of metal or a combination of metal and glass. But the following metal variations can be in color: gold, bronze, copper, glossy and matte chrome.

The color of accessories and furniture fittings must match the color of the fittings kitchen set. Read more about the combination of colors in the interior of the kitchen.

What is needed furniture fittings to create a multi-level structure of shelves?

First of all, you need a pipe that performs the function of a foot and a base-fastener for the shelves. It is made of brass or nickel and most often comes in a diameter of 50 mm. The pipe (or rod) is fixed to the rod holder to the floor, side-mounted to the wall and / or to the ceiling with a ceiling mount. The bar counter is also attached to the countertop with a special flange.

How to choose the right package

Let's figure out what will really be necessary, and what is better to refuse so as not to clutter up the space.

Choosing accessories for a bar counter is necessary based on its purpose. How is it most commonly used? home bar for parties and celebrations, as a table for breakfast and snacks, an additional surface for cooking, working at a computer or simply as an accessory that separates ?

If the bar counter is for you, first of all, a place to relax with friends, then complete it with a multi-level composition of: a holder for glasses, a central shelf for bottles, a side shelf for serving and storage. If the kitchen and the counter itself are large, and you want to create the atmosphere of a real bar, then install a hinged system as well.

Using more than three shelves is only permissible if your bar counter is a bar counter, and not a breakfast table.

If you often cook at the bar table or want to use it to store kitchen utensils, then you will need: triple hangers with hooks on which you can hang ladles, a side serving shelf, a universal central storage shelf (preferably with high sides) and desired glass/bottle holder. But, if there are children in the house, then, of course, it is better to refuse this idea.

In other cases, it will be enough to hang rails on the wall with hooks for appliances, baskets for plants. And you can just tell small locker or a shelf for storing glasses, drinks, dishes and other items that you most often need at breakfast or while working at the computer. from central and hanging shelves if they are not urgently needed and your kitchen is not fulfilled, it is better to refuse.

Step 1: Cardboard Model

To make the stand beautiful, you need to make a cardboard model in order to make sure that all measurements are taken correctly. To do this, you need to put a bottle of wine on the table and distribute glasses evenly around it, after which we measure the distance between two adjacent glasses as shown in the figure. Usually this is the length and width of the rack. Round it up to get a little more free space.
Cut out a piece of cardboard to size. In this case it is 18x18 cm and draw lines between the two groups at opposite corners to find the center. In order to make a circle in the center, you can use a glass.
Then we measure the width of the stem of the glass at its narrowest point. We draw lines in each corner of the cardboard a little wider than the legs so that it passes. If the glass is 11mm, make the width 13mm. Connect the lines at opposite corners to make an X.
At a distance from the center, which is equal to the radius of the bottle and the radius of the bottom of the glass a little more (on average 35 mm for a bottle and 30 mm for glass, + 3 mm for a margin, it turned out 78 mm) draw 4 circles. The diameter of the circles should be slightly larger than the X width that was drawn earlier. You can make circles with a compass or circle the salt shaker. These 4 circles will keep the glasses from slipping out.
Cut out the cardboard according to the marking and try it on. If it's not quite accurate, make another model to correct.

Step 2: Making a Wooden Stand

As soon as the cardboard model turned out (fitted in size), you can sit on a wooden board. We redraw the dimensions and markings from cardboard.
First, drill a hole in the center and 4 circles, using a drill and a drill, as shown in the photo, as it will be difficult to make them even if you start by cutting lines.
After the holes, we cut out everything else, namely the paths for the glasses.

Step 3: Sanding

To smooth all corners, use sandpaper. To smooth holes from the inside, wrap the pencil in it, so it will be easier to get to hard-to-reach places. If you want to give such a stand for glasses to someone, then you can paint it and varnish it to create a more presentable look.
There are many options for such coasters that can be made in the form of a circle, an octagon, and even make additional holes for a corkscrew and other items. Good luck!

It is very important to have a corner in the apartment where one could spend time in a pleasant company of friends over a glass of good wine. Hanging, wall-mounted or tabletop glass holder options will help you decorate this place in the latest fashion. This invention, borrowed from bars and restaurants, made it possible to create an atmosphere of comfort and coziness at home, thereby widening the door of a hospitable home for relatives and friends.

The functional purpose of the glass holder

Each owner dreams of creating the most comfortable atmosphere in his dining room, in which it will be pleasant to spend time with all family members and guests. Any holiday or just a romantic conversation with loved ones is accompanied by a glass of champagne or wine. A kitchen room is a specific area that is located in a humid environment with elements of the result of cooking floating in the air. Grease droplets, soot and smoke deposits do not have the best effect on appearance glass or crystal barware. If it is not properly maintained, fingerprints and unnecessary stains remain on the surface during operation.

To avoid this, you need to take care of a device that will help keep the dishes suspended, which will prevent dust and dirt from entering the surface. It would be a very wise decision to buy hanging glass holders in the store, contact the experts or make them yourself.

Types of bar counters

In order to choose the right hanging or any other holder for wine glasses, you need to decide what type the bar counter belongs to and what accessories are most suitable for it.

Rack-partition, zoning the space of a spacious living room, suggests the presence of all accessories at the request of the owner. There may be a holder for drinks, a pendant for glasses, martin bowls and glasses, a bread box, a fruit bowl, a napkin holder and much more.
Separate stand. It usually serves as an addition to the dining table with an island layout, it does not have much big sizes, as it is intended for morning coffee, a quick snack and receiving a small number of guests. Recommended accessories are limited to bottle and glass holders.
surface continuation. This bar counter is a continuation of the kitchen surface and is a countertop located at an angle to working area. Its free edge can be attached either to one floor or to the floor and ceiling. It is allowed to have holders for bottles and wine glasses, hanging glasses.
Rack-table. This is the most convenient option for a small apartment. Such a rack is located against the wall or is a continuation of the window sill and does not allow you to place anything other than a glass holder, since small area surfaces will be too overloaded with hanging objects.

Glass holder options

After making sure that the usual shelf for glasses is not the best place for their storage, you can start choosing the most suitable type of holders. In accordance with the type of bar counter and at the request of the owner, you can choose a hanging, wall, table holder or mini-bar.

Suspension. This option is very convenient to save space, while it looks stylish, adding bright accent to any interior. Hanging glass holder attaches to any horizontal surface. Cabinets, mezzanines, the ceiling of the bar counter or the kitchen itself can act as a base. suspended structure can be made of shiny or matte metal, wood, glass, and plastic. In the latter case, use plastic profiles in the form of grooves, allowing glasses to hang in the air on invisible holders. Hanging type of holders for wine glasses can be made in the form of a circle, a semicircle, in one or more lines. Very easy to use railing system special pipes designed for hanging products. Ways of fastening railings can be suspended, vertical and horizontal. The most important advantage of this system is the ability to install dish holders without a bar counter.

Wall. This type of holder makes it possible to fix the structure with hanging glasses along the wall, maintaining the required size parallel to the bar or table, if they are also located along. If the rack is perpendicular to the wall, you can use another method and fix the holder at an angle of 90 degrees, pushing the main part deep into the room, as if hanging over the bar. In the second option, you should pay attention to the fact that the material for the holder is especially strong, and the fastening is reliable, since the main load falls on it.

Desktop. Such accessories are used by the owners to create comfortable conditions when receiving guests in the kitchen, where there is no bar or it turned out to be preferable desktop version. The assortment of stores has a large number of mini-bars and other devices, and if you wish, you can make a holder for glasses with your own hands. There are many instructional videos and visual photo instructions on the Internet that will allow you to make bar fittings at a minimum cost.

A little imagination, skills, desire and advice from designers - and the dream kitchen will be complemented by a stylish cozy corner for receiving guests and romantic communication.

Video: a couple of ideas for self-manufacturing original glass holders.

The western piece of furniture in the form of a high table and graceful chairs still does not go out of fashion, more and more surprising with new configurations and designs. Accessories for the bar counter are indispensable devices that provide extra bed for storage kitchen utensils, food and drinks. Modern manufacturers offer many options various designs for every taste and budget. When choosing accessories for a bar counter in the kitchen, it is worth remembering their original purpose and purchasing only what is really useful in the household.

Bar counter equipment: pros and cons

The bar counter performs a number of important functions: it zones the space, it is used as dining table or simply serves as an interior decoration. It can be single-level or multi-tiered, with or without shelves. The most important factor is that it harmoniously fits into the overall interior and does not clutter up the space. A round bar counter is suitable for spacious rooms, and a rectangular compact one will look good in a small kitchen.

The presence of accessories and equipment has its advantages and disadvantages. Among the advantages of accessories can be identified rational use space, especially when installing a multi-level structure. It is possible to organize a working and dining area so that every item is in its place, and everything you need is at hand. Finally, bar counters for the kitchen with stylish accessories and lighting cause admiration among guests, becoming the highlight of the interior.

However, if you overload the design with shelves and accessories, especially in a small kitchen, the room will visually decrease, become cramped and bulky. In addition, the bar counter will have to be cleaned much more often from dust and dirt that accumulates on appliances, glasses and roof rails.

Varieties of accessories

Accessories for the bar counter are classified according to the type of fastening and purpose. All accessories are usually made of metal, sometimes combined with tempered glass. You can choose the most good option, which will be combined in color with other interior items: copper, gold, chrome, bronze, and also choose a matte or glossy finish.

Fastening classification

Bar shelves of the central type, which can be round or cone-shaped. These include a fruit bowl, glass holders with special recesses for legs, niches for storing cutlery, small items, spices, etc. They are mounted on a pole passing in the center of the shelves.

Swivel (side) shelves for bar counters with the help of mounting on the railing, which extends to the side, have the ability to rotate around its axis. Such bar fittings will become indispensable if there is not enough space for table setting, because it can always be removed to the side. It includes: a round fruit bowl, a cone-shaped shelf for storing kitchen utensils, as well as a single or triple hanger on which you can hang the necessary cutlery.

Hanging system for storing glasses, bottles and glasses, which is not attached to the bar, but to the ceiling. Thanks to this design, the kitchens, photos of which can be viewed on the website, look especially stylish and modern.

Classification by purpose

Bar shelves in which you can store kitchen utensils.
Hangers with hooks for hanging napkins, cups, ladles, etc.
Designs for storing glasses and bottles.

Hanging baskets for the bar counter are a very original accessory if the design is adjacent to the wall. They can be multi-tiered and fastened with hooks like a railing on an apron.

Mounting methods

To install a multi-level system of shelves, you will need a bar pipe with a diameter of 5 cm. When choosing a material, give preference to brass or nickel - they are the most durable and easy to use. The rod is fixed with the help of flanges to the ceiling and to the floor and with the help of side fasteners to the wall. Rails are put on the pipe for the bar counter, which allow you to adjust the height of the shelves. Such holders allow you to change the rack configuration by adding or removing new elements.

The bar pipe itself and everything that is fixed on it with the help of various holders

Choice of equipment

Accessories for the bar counter should be selected in accordance with its purpose and the volume of the room. If the piece of furniture is considered as a table for a snack, then it would be advisable not to overload it with accessories, but to build a small shelf or cabinet. In the absence of a bar, this option would also be appropriate, since the bar leg, as well as a solid structure with a tabletop, does not imply central and swivel shelves.

For those who like to cook a lot, it is recommended to install hangers with hooks for storing kitchen utensils, which should always be at hand. You will also need a fruit bowl and a side shelf for small items. Hosts who prefer to have fun with friends can get a hanging system for glasses and beer mugs. A similar design with backlight will look very impressive.

In order for the bar pipe not to remain empty, it is necessary to install swivel-type shelves that do not interfere with table setting and are easily moved to the opposite side. In addition, guests do not have to reach far for the desired item.