How to make a folding table for the garage. Folding compact table for the garage. We assemble a workbench for the garage with our own hands

Dear visitors to the site “Visiting Samodelkin,” in the material presented you will be shown how to independently make a durable and reliable workbench for a workshop or garage.
There’s no way you can do without a workbench in the garage; something constantly needs to be repaired, disassembled, assembled, and where to do this if not on a workbench, the vice is screwed to the tabletop and all the necessary tools are always at hand.

The workbench is designed for metalworking work, has a metal frame made of angle and corrugated pipe, as well as convenient drawers for storage small tool, bolts, nuts and other useful little things, there are also convenient shelves, and the tabletop itself must be trimmed with iron 1.5-2 mm thick. In addition, a panel for tools is attached to the back of the table, which is also very convenient because the necessary things will hang right in front of you, it is also advisable to display a socket or tee on the panel so that you can connect a power tool.

Needs to be protected metal surfaces from corrosion, namely, cover them with an anti-corrosion compound and paint, so the table will always look neat and will serve you for many years.

So, let's look at what exactly is needed to make a workbench?

Materials
1. professional square pipe
2. corner 40x40 mm
3. metal sheet 2 mm
4. plywood
5. screws for metal
6. paint
7. impregnation for wood
8. wood screws
9. anti-corrosion coating
10. metal plate
11. furniture guides for drawers

Tools

1. welding machine
2. grinder (angle grinder)
3. drill
4. roulette
5. wood hacksaw
6. jigsaw
7. brush
8. hammer
9. screwdriver
10. ruler
11. marker
12. level
13. corner
14. sandpaper
15. grinder

Step-by-step instructions for creating a workbench with your own hands.

Assembling and installing this table in a garage or workshop is a serious and responsible matter. When making it, you first of all need to know that it must be stable and withstand a load of about 200 kg, check with a level to see if there are any distortions, because it is desirable for the table to end up smooth. Before starting work, you should study the drawings and diagrams provided by the author.

After which the craftsman welded the base for the future workbench using square-section professional pipe.

I thoroughly cleaned the welding areas using an angle grinder.

I welded metal corners to the back of the table; a panel for the tool will be attached to them.

Then the area under the countertop is strengthened, namely, additional pipes are welded.

The tabletop itself will be made of 50 mm boards, and the author made a frame from a corner to accommodate it.

After which all joints must be reinforced with metal plates.

Spacers are welded into the corners.

The workbench will be subject to various loads: weight, shock, vibration, etc., at the creation stage, all these points must be taken into account and be on the safe side.

For the convenience of storing small tools, spare parts, bolts and nuts, the master made special boxes from plywood.

The surface of the workbench is painted.

Furniture guides are screwed onto the sides of the drawers.

The tree will take some of the load from shock, vibration and weight.

The resulting surface should be sanded well; for this, the master used an angle grinder (angle grinder) with a grinding wheel.

In order for the wood to last a long time and not rot under the metal, it should be treated with a special impregnation for wood.

After that, a 2 mm sheet of metal is cut to the size of the tabletop.

The metal must be treated on both sides with an anti-corrosion compound so that the metal sheet does not rust.

The drawers are installed in the table cavity where the craftsman has installed a slide under each drawer.

This way the drawers will be easy to open and close.

There is a handle screwed into the front of each drawer for easy opening.

For example, you can place emery on a finished workbench by bolting it to the tabletop.

There are open shelves at the bottom where you can store power tools.

It is very convenient to work when you have everything at hand and collected in one place.

You can also install a vice on the workbench, which is also screwed to the tabletop with bolts and tightened with nuts.

Initially the workbench was used exclusively when processing wood, and its main task was to secure the workpiece for support when using tools. To do this, they cut out holes of various shapes along the edge of the tabletop, hammered in wedges, and inserted combs and blocks for support or as guides. This workbench was called classical.

The simplest workbench design looks like this:

supporting frame with legs;
thick table top with a powerful surface;
additional shelf under the tabletop for storing tools and accessories;
shelves or drawers that increase storage space.

Interesting: Popular now computer game Minecraft, which, to stimulate creativity, invites players to create virtually wood workbench from A to Z, in any modification.

Improving instrumentation and the emergence of electrical equipment affected workbench modifications. And manual processing of a new material - metal - created a completely the new kind desktop for metalwork. So by appointment Today there are workbenches:

carpentry;
carpentry;
locksmith;
universal.

DIY garage table - photo options:

A work desk in a garage can be designed for a different number of workers, or zoning locations.

In this case, workbenches are distinguished:

single;
double;
multi-seat.

The addition of the capabilities of a specialized workplace has given rise to the following varieties:

folding;
mobile (on wheels);
wall-mounted folding workbench;
workbench cabinet (with sections for storing tools).

Based on the material from which the work table for processing materials is made, there are:

wooden (made of durable wood);
metal (welded structures);
combined (the wooden base is reinforced with a metal sheet on the tabletop, supplemented with metal combs, screws with threaded threads; the metal body is equipped wooden shelves and boxes).

Important: The metal parts of the workbench need an anti-corrosion coating, and the wooden parts need antiseptic impregnation.

What does it look like homemade workbench for the garage, watch the video:

What desktop does a car enthusiast need?

There isn't a lot of free space in the garage, so it's important to decide what... what goals it will be installed:

minor repairs and minor plumbing work;
a constant range of work related to home maintenance or your hobby;
amount of work involved in car care for complete liberation depending on the service station.

In any case, limited space will require a garage workbench to:

compactness;
sustainability;
versatility;
illumination;
performing storage functions;
safe connection to the electrical network;
raised above the floor by 15 cm for high-quality cleaning.

Dimensions of a workbench for a garage(standard - 6x4) cannot exceed 60 cm in width and 1.5 m in length. The height of the workbench in the garage is determined based on the owner’s height - up to the middle of the hands in a standing position. Best choice there will be a metal structure, since most of the work in car maintenance is metalwork. For maximum stability, it is recommended to support the supporting frame with 6, or even 8, legs.

Selecting a location- also a specificity of a garage workbench: after all, it should be convenient to work on it while the car is standing indoors. And, at the same time, it is recommended to remove it from vehicle no less than 1 meter. It is difficult to take into account all these subtleties with a purchased copy.

We make a workbench for the garage with our own hands - drawings:

If you make a workbench with your own hands, which one - wooden or metal?

Wooden is easier to make, but...

The choice of species again determines special purpose: faster and for simple operations - it will also be acceptable wooden frame from a powerful board (40x80mm) or timber (50x100), assembled into a rectangular structure according to standard dimensions, using self-tapping screws or nails. For structural reinforcement Use wooden spacers between the legs (top and bottom). The lower ones (at a level of 15 cm from the floor) can become the basis of a storage shelf.

The tabletop is assembled from planed tongue-and-groove beech (oak) boards or two sheets of moisture-resistant plywood 18mm thick, glued together and trimmed along the edges. For special strength The surface of the table top is covered with a metal sheet 5 mm thick, making a side on the wall side.

However, if you make a wooden workbench for the garage with your own hands, then this option has its disadvantages:

it is not designed for high force;
it is difficult to place several necessary devices on it at once: for drilling, sharpening, heavy bench vice;
the wear of the wooden frame is short-lived;
wood deteriorates from spilled oils and paint, filling the pores and crevices with metal dust and shavings;
There is still a risk of fire.

See how to make a workbench in the garage with your own hands - photo:

Metal desktop - the right choice

Advantages of a metal workbench for a motorist:

compactness of all structural elements while increasing reliability;
ability to withstand any force;
additional weight for stability;
the ability to take into account the features of the room by making the workbench mobile, folding, folding, shortened;
increased strength of the welded structure;
table tops can be made entirely of metal with a 3-sided side;
tabletop does not have sharp corners(for safety);
complete with 2 vices and a clamping screw;
holes are provided for clamps and stops;
allows you to perform sawing and cutting of metal, turning and grinding;
the ability to fill the space under the countertop with any storage devices (shelves, drawers, organizers, grids);
reliable fastening of drawers and shelves is ensured;
metal shavings do not get clogged in the cracks;
it can be used for processing and wooden parts;
safety in conditions of fire risk;
saves employee effort;
This table is easy to clean.

For your information: A garage workbench made of metal is a bestseller in specialized stores, where only price and design improvements are of decisive importance.

But the desire for creativity leads along the path of one’s own experience.

Useful video on how to make a DIY workbench for a garage:

How to make a metal workbench for the garage?

Algorithm:

Choose a location, taking into account all the requirements for placing the car in the garage.
Prepare solid foundation for installation.
Take measurements of the installation site.
Create a sketch of your idea with all the details and improvements.
Prepare required material and tool.
Prepare structural elements.
Consider the technology for assembling and strengthening the frame.
Assemble the product.
Cover with primer and protective layer.
Conduct functionality and security testing.
Attach the necessary equipment to the tabletop.

Material required for work:

metal hollow profile (4mm) for legs;
metal equilateral corner (50x4mm) for drawers, leggings, guides for shelves;
galvanized sheet metal or stainless steel for the countertop (5 or 2mm);
metal strips for making sides;
tongue and groove board (50x150mm) for wooden table top with metal upholstery (optional);
self-tapping screws;
primer and paint for metal.

Tools you will need:

level, tape measure;
drill;
Bulgarian;
welding machine.

Assembly technology:

to assemble the desktop, a one-piece welded connection of all metal parts is used (the drawers as the base of the tabletop, legs, jumpers, rectangles for stability at the ends of the legs);
horizontal and vertical elements are equipped with permanent bevels for greater strength;
the tabletop is made of a solid sheet of metal or a board covered with 5mm galvanized iron; in the first case, the tabletop is welded, in the second, it is screwed with self-tapping screws to collets and additional strips of metal;
for arranging shelves and drawers, a corner is welded to the racks as guides (the drawers can be made of either metal or wood); the wood is treated with an antiseptic;
rectangles welded onto the ends of the legs increase the stability of the workbench and allow it to be fixed to the floor.

DIY metal workbench in the garage - photo drawings:

Final advice: You should make a DIY work table for the garage (metal) only if you are familiar in practice with the art of welding and the safety rules when doing it.

Most car owners use the garage as a place to store their car, preferring to have their car repaired in special services. However, there is a category of citizens who like to work on their cars themselves, repairing and modernizing them. To do this, you need a workbench indoors, on which it is convenient to repair various vehicle mechanisms. How to do folding table V own garage So that it doesn’t take up a lot of space, we’ll look at it below.

The folding table has many features that distinguish it from the usual design:

A folding table installed in the garage does not take up free space and is folded out only when necessary.
Performs various functions that would be difficult to implement without it. On a folding table in the garage you can fix a broken part, have lunch and lay out drawings or diagrams needed when repairing a car.
Fits beautifully into the interior.
You can assemble it yourself.

Note! Next to the folding workbench, you can organize a rack with tools, which will increase the convenience of work.

Material selection

The folding table is made from the following materials:

metal;
tree;
combination of metal and wooden structural parts.

The advantage of wooden folding tables made in the garage with your own hands:

low cost;
wood is easily and quickly processed, taking the required form. For creating simple designs no special tools required;
wooden products add to the atmosphere homely atmosphere, diluting a large number of metal that surrounds you indoors.

A metal folding table mounted on a wall in a garage has the following advantages over wooden structures:

the durability of the metal is much higher;
metal sheet is more difficult to damage.

Disadvantages of metal:

hard to do alone;
special tools will be required;
Some tools require some skill to use. For example, it is not enough to have a welding machine, you need to know how to use it;
more expensive than wooden models.

Many owners prefer to combine materials. This lightens the overall weight of the structure and reduces the final cost.

Design

Design is the main and most difficult part in creating a folding table in the garage with your own hands. Without a well-prepared drawing that indicates the main structural elements, you will not be able to properly purchase materials and prepare the necessary set of tools. The drawing is made independently or downloaded from the site and subsequently modernized to the needs of a specific owner.

Important! Do not neglect the design stage, otherwise after assembly it will turn out that the design is inconvenient and only gets in the way instead of being useful.

Required Tools

For wooden structures you will need:

wood hacksaw;
hammer;
nails;
screwdriver or screwdriver;
screws;
roulette;
corner;
pencil for marking.

While creating metal model you will need:

welding machine;
Bulgarian;
chalk for marking;
screwdriver;
set of screws;
corner;
roulette.

Depending on the complexity of the selected drawing, an additional set of tools may be needed.

How to make a folding table for the garage with your own hands

The folding workbench is made according to the following algorithm:

assembling the tabletop;
we make supports that will support the structure when disassembled;
We attach it to the wall at the height of the legs wooden beam or metal corner. Hinges will be attached to it, combining the timber and the tabletop into a single structure;
we attach the supports.

Note! Don't forget to equip work area around the workbench, supplying electricity to it and installing proper lighting.

Everyone knows that a garage is necessary in order to park a car in it. However, many car owners use this room as a warehouse for unnecessary things, and if space allows, they convert it into a small workshop. Consequently, appropriate equipment is installed in it - racks, shelves and a workbench. The latter is a multifunctional work table used for processing various materials, performing plumbing, installation and electromechanical work. You can make workbenches for the garage yourself.

Features of the workbench design

A workbench for a garage is often compared to desk, because it provides convenience for a variety of work and makes everything possible necessary tools keep on hand. Thus, in addition to the tabletop, it has a large number of shelves and drawers. The design of the workbench consists of the following elements:

The workbench must be well lit. For this install a stationary turning lamp, which is plugged into the socket. It can be installed on the wall, near the workbench, but it is much more practical to build electrical equipment directly into it. In this case, there will be no problems with electrification if you need to install the table in a new place.

Workbenches for garage

Types of workbenches

There are two types of such tables:

carpentry;
locksmiths.

Joinery is a metal or wooden frame, the tabletop of which is made of wood. It is best not to process metal parts on it, because traces of machine oil remain on its surface, which are very difficult to get rid of. In addition, metal shavings often damage the surface of the table, as a result of which it will not last very long.

For work in the garage It is best to use a bench, which is a universal model. Its tabletop is metal, so it is used for processing wooden and metal parts. A wide variety of operations are performed on it: sawing, cutting, sharpening, grinding. In addition, this design is much more stable than carpentry, which is very important for working with metal parts, since during work there is often strong pressure on the surface of the tabletop. Tools are stored in shelves that are specially designed for this purpose.

Material used

To make a workbench for your garage with your own hands, two materials are used: wood and metal. The difference between these designs will be reliability and resistance to various force and mechanical influences. In this regard, a metal workbench will significantly outperform a wooden one. There are other points worth mentioning:

It is difficult to make a metal structure with your own hands, because will require welding work , and you also need to have skills in working with metal. Processing an iron blank is also quite difficult. Therefore, to make a desktop of this type with your own hands, you will need special equipment and specific knowledge.
A tree is a completely different matter. To make a wooden workbench for the garage with your own hands, only a standard set will be needed home tool – grinder, screwdriver, electric jigsaw, hammer, etc. You can even use only hand hacksaw, but the work in this case will be a little more complicated.
If we take into account the operational and technical aspects of a desktop made of one material or another, then it is necessary to highlight a lot of weight metal product and quite low strength wooden workbench. Ideal option It would be a combination of these two materials in one product, for example, make a workbench from wood, and cover its tabletop with a thin layer of iron. In this case, even the use of a vice and other similar devices will not harm it.

Thus, combining materials is ideal solution for making a workbench to the garage with your own hands. However, if the desktop will not be used too often, but from time to time, then it is best to get by completely wooden structure.

Preparatory work

Before you start making a garage workbench with your own hands, you should decide what size and configuration the future structure will have.

When equipping a garage with your own hands it is very important to choose the right place where the workbench will be installed. The best option will be considered the part of the garage where there is good lighting and equipped electrical sockets. It is also necessary to take into account such a moment as the direction of natural light. The light should come from the left side or straight ahead. In this case working surface will always be illuminated.

The length of the tabletop should be such that it can easily accommodate tools and large parts required for work. Its width should not be more than 50 - 60 cm. This allows you to easily reach the opposite edge. One side can be equipped to handle electrical cutting tool: circular saw, jigsaw, etc. For this purpose, fix the board so that it protrudes beyond the edge of the workbench by 200 - 300 mm.

Also, before you make a workbench in the garage with your own hands, you need to clarify one more parameter - its height. The ease of carrying out the work depends on how correctly it is determined. To determine the height, you need stand up straight, bend your elbows and mentally lean on your elbows on an imaginary table. Distance between floor and with bent arms will be the ideal height for the future structure.

Required tools and materials

To make a workbench in the garage, you will need the following tools:

a grinder with a grinding disc and a circle for cutting metal;
level;
screwdriver;
drill;
welding machine and electrodes;
roulette;
jigsaw for cutting plywood.

Materials:

corner 4 mm thick;
steel strip 4 mm thick;
steel sheet required for the manufacture of holders for drawers with a thickness of 2 mm;
plywood for making the back and side walls of the table and drawers, 15 mm thick;
screws;
anchor bolts;
square pipe 2 mm thick;
steel sheet that will be used for the countertop, 2 mm thick;
wooden boards for tabletops 50 mm thick;
guides for table drawers;
metal screws;
paint for metal and wood.

A structure made from these materials will be reliable and very durable. Boards will be used for niches and shelves, and steel strips will be needed to create edges on the table surface.

Assembling a workbench for the garage with your own hands

After completing all preparatory work start assembling a workbench for the garage with your own hands. To do this, take 4 supports made of steel angle. The legs for the desktop should be the same size. In the upper part they are fastened together using a corner and welding. Thus, if you look at the structure from above, you should get a rectangle measuring 100x50 cm.

The same action is performed from below. At a height of about 15 cm from the floor, cut corners are welded, which will subsequently provide additional rigidity the entire structure. If such a need arises, you can weld additional racks that will be needed to attach shelves and drawers.

Once the frame is ready, they begin to make the workbench cover. Edged oak boards with a width of 25 cm and a thickness of 5 cm are taken. The length of the boards is determined based on the calculations made earlier. The boards are laid on top of the frame and fastened very tightly to each other. To do this, along the perimeter of the upper connecting elements frame, a number of holes are made for the bolts.

Holes are also drilled in the tabletop boards through which they will be attached to the frame. From the top too holes need to be drilled so that the bolt heads fit into them.

After the cover is secured, we begin to cover it with metal. For this, galvanized iron is used. A metal sheet of suitable size is fixed to the surface using ordinary self-tapping screws. You should be aware that when cutting, burrs can form on metal edges, so for safety they should be processed with a file.

At this point, the work on making a simple workbench for a garage is considered complete. Making such a design with your own hands is quite simple. For better stability on workbench legs metal corners or rectangles are welded from below, which allow you to screw the structure to the floor.

Thus, a workbench in a garage is very convenient device. It can be equipped with additional drawers, shelves and tool holders. A special screen is screwed to the side of the structure closest to the wall, which will be used to place pliers, screwdrivers, wire cutters, etc. on it. A workbench made by yourself is often no worse than a purchased one.

A garage is a multifunctional space. In it you can install and repair cars, design and make various things and mechanisms with your own hands.

If a person likes to spend time in the garage doing repair work, he needs to properly equip his workplace. A workbench is a multifunctional work table on which you can process various materials, carry out metalworking, electromechanical and installation work. Also in the design of the workbench, you can consider shelves and drawers to store tools and other items.

Types of workbenches

Workbenches are made for processing metal (metalwork) and wood (carpentry). The designs differ in the material of the countertops. For metalwork models, the table top must be metal, since working with metal involves the use of machine oil and other liquids that wooden surface may leave marks.

Also, when processing metal parts, force and the use of sharp tools are often required, so it is best to equip the workbench with a metal tabletop.

Woodworking benches are designed for working with wood, so they are not as durable or functional as bench models.

Workbench design

If the design of a work table for a garage is made by hand, then first of all you need to carefully think through every detail, figure out where the tools will be placed, what work will be carried out on the workbench. The model of the garage table depends on this.

Standard models are often equipped drawers, which can be made from wood or metal. Also, the table design can be supplemented with shelves, a power shield for hanging tool, which will always be at hand. But most importantly, the workbench must be stable, durable and reliable.

Tool

Grinder with a circle for cutting metal and a grinding disc.

Welding machine and electrodes. Overalls and protective equipment for welding work.

Screwdriver.

Jigsaw for cutting plywood.

Materials

Angle 50 mm by 50 mm, thickness 4 mm, length 6.4 m.

Square pipe 60 mm by 40 mm, thickness 2 mm, length 24 m.

Angle 40 mm by 40 mm, thickness 4 mm, length 6.75 m.

Steel strip 40 mm wide, 4 mm thick, 8 m long.

Steel sheet for tabletop 2200 mm by 750 mm. Thickness 2 mm.

Steel sheet for making drawer holders. Thickness 2 mm.

Wooden boards for the table top. Thickness 50 mm.

Plywood for making drawers and for the side and back walls of the table. Thickness 15 mm

Guides for desk drawers.

Screws for assembling plywood boxes.

Self-tapping screws for metal.

Anchor bolts.

Paint for wood and metal.

The workbench, which will be made from these materials, has quite impressive dimensions: table length is 220 cm, width - 75 cm. The overall design and large table top allow you to place it in different ends table vise and, for example, sandpaper or other tool.

The first step in making a workbench is cutting the available material into elements. Profile pipe intended for the manufacture of frames. The steel angle is designed to create stiffeners. It is cut into pieces and a power frame is formed from it. Also, a steel corner is needed for edging the tabletop on which the boards will be laid.

The steel strip is intended for the manufacture of guides on which the side panels will be attached. This material will also be used for brackets for fastening boxes and plywood.

Table drawers are made of plywood.

Second step - welding power frame workbench. The tabletop elements are welded first - 2 pipes 2200 mm long and 2 pipes 750 mm each. The frame must be welded so that another frame of corners can be welded on top of it, into which the tabletop boards will be laid. To reinforce the tabletop, it is necessary to weld a few more after 40 cm steel pipes, which will serve as stiffeners.

Then 4 side legs are welded along the edges of the workbench. Their length is 900 mm. Power bridges are welded between the legs to strengthen the structure.

Once the basic frame is ready, you can begin welding the structure for the boxes. To do this, square frames are formed from steel pipes, which are welded to the tabletop on both sides of the table. The frames are reinforced with longitudinal stiffeners.

The third step is making a frame for the tabletop. Two steel angles, 2200 mm long, and two more angles, 750 mm long, are needed to make the frame. The structure is welded so that wooden boards fit inside it.

The angle frame is laid on a pipe frame and welded. The result is a reinforced tabletop, 8 cm high with internal stiffeners.

The metal frame of the workbench is almost ready, all that remains is to weld the panel sheathing for attaching the tool. This requires one metal corner with a length of 2200 mm and 4 corners with a length of 950 mm. Two elements are attached to the sides of the structure and two in the middle for reinforcement. The tool panel is welded to the tabletop.

The frame of corners and pipes is ready. You can begin to strengthen the structure. Brackets are welded to the sides of the table, which are cut from a steel strip. A total of 24 parts are needed. A hole is drilled in the middle of each bracket. Using these holes, the side and back walls plywood tables will be attached to metal frame workbench.

The fourth stage is making drawers for the table. Plywood is cut into blanks, which are screwed together with screws. The number of drawers depends on what will be stored in the table. If small parts, then you can build 3 boxes, if large, then 2. It all depends on personal preference.

Drawers can be placed on both sides of the table, or mounted on one half retractable structures, and on the second there are ordinary open shelves.

After the drawers are assembled, you need to weld metal strips with holes between the sides of the drawer compartments. To these holes with inside the slides for the drawer guides will be attached.

The fifth stage is laying the boards into the tabletop frame. Boards 50 mm thick are cut into pieces of a certain length. If you have a long board available, then you need three blanks with a width of 245 mm and a length of 2190 mm. If there are no long boards available, then you can lay the blanks across the table. For this purpose, wood 205 mm wide is cut into 10 pieces 740 mm long.

Before laying the wood into the table frame, it must be treated with an antiseptic solution. This will protect the material from rotting and damage by beetles.

Then it is imperative to paint the entire metal structure workbench. This will protect the metal from corrosion. It is best to use a weather-resistant and anti-corrosion coating option. Welding seams need to be painted especially carefully. Drops of metal and unevenness are recommended before painting works clean thoroughly. This can be done using an angle grinder with a metal grinding disc.

After the structure has dried, you can begin laying the boards on the countertop. They should not be driven too tightly into the frame. This is due to the fact that wood tends to expand and dry out when temperature and humidity change. It is better to leave a small gap of a few millimeters between the boards. The surface of the wood needs to be sanded, this will simplify installation metal sheet on top of the tree. The boards around the entire perimeter of the table are screwed to the frame with self-tapping screws.

The sixth stage is fastening the top steel sheet. It can be welded to the countertop, but there is wood inside the structure, which can ignite during the welding process. Therefore, it is best to attach the steel sheet with hidden screws to wooden boards. The metal must first be painted on both sides with a rust converter. This covering material looks like a transparent paint coating, is easily restored and reliably protects the metal from rust. You can also paint the metal tabletop with the same paint that was used to cover the frame. It will be beautiful, but over time the paint may scratch and the table will not look very new.

The last stage is installing the drawers on the guides and attaching the plywood to side walls , shelves and power shield in front of the table. This work can be called finishing workbench. After work with plywood is completed, it must be coated with a composition that will protect the material from exposure environment. Also, do not forget about the design of a power shield for tools. You can attach special hooks or screws to it, from which the necessary things will be hung.

To make it convenient to work at a workbench, you can attach a special lamp with a bendable stand to the power panel. In this case, you can optionally direct the flow of light to the desired location.

Video - The process of making a workbench

Installing a vice on a bench

A vice is an indispensable attribute mechanic's workbench. It is not recommended to attach a clamping tool that weighs several tens of kilograms to the tabletop itself. It is best to place a metal gasket 1 cm thick between the metal of the table and the tool. You need to drill holes in the gasket for the anchor bolts. Then, in the same places, drill holes of the same size in the tabletop. The entire structure is fastened with anchor bolts.

Safety requirements for a homemade workbench design

If the garage area is not too large, then you can make a smaller table for plumbing work with your own hands. But it is worth knowing that the entire structure must be stable, not sway or budge with little effort.
The workplace should be organized so that nothing disturbs a person. When working with a vice, all unnecessary tools should be removed from the tabletop.
Corners and protruding parts of the table should not be too sharp or have cutting edges.
After repair work behind the workbench, you need to clear the workplace from metal shavings, drops of oil and other materials.
If a homemade workbench is made correctly, it can easily withstand a load of 200 kg.