Floors made from cut wood. How to make wooden paths in the garden and country house with your own hands. step - preparing the base

Floors are an important covering in any room, which can be created from different materials. Wood is considered environmentally friendly and attractive. Therefore, the floor is often formed with your own hands. It does not require the investment of numerous funds, and is also considered easy to create.

Features of this floor

A floor made from wood cuts with your own hands looks attractive and interesting in the photo. Its creation involves the use of special “rounds”, the thickness of which is several centimeters. They are formed as a result of cross-cutting logs.

Due to them correct installation The base ensures the creation of a bright, beautiful and unique surface on the floor. To fix the coating, fill it with different liquid materials, polymers are most often used for this.

Pros of gender

It’s easy to create a floor from wood cuts with your own hands, but it has many advantages:

• an environmentally friendly coating is formed;
• it is possible to make a floor with minimal expenditure of money;
• you can take advantage of various unique opportunities to create unique design, since it is allowed to use saw cuts from all kinds of logs, which may have different or similar fragments;
• elements differ in shape, color or size;
• such a solution is considered original for each house or apartment;
• It’s easy to make a floor from wood cuts with your own hands, which significantly reduces the cost of creating a covering;
• floors are considered universal, so they are suitable for any interior and style.

Some people even prefer to use cracked logs, which create a charming finish. But you should only use logs that show no signs of disease or rot.

Flaws

This floor has some disadvantages. It is important to select fragments that have the same thickness. If errors are made in technology, this will lead to the creation of floors that do not have high strength and durability.

What kind of logs can be used?

Not all elements are suitable for this process, as some requirements for them are taken into account:

• logs that are too soft are not used for the procedure;
• it is important to select cuts obtained as a result of processing hardwood;
• spruce, pine or aspen cuts are not suitable for these purposes, therefore optimal choice there will be walnut or oak;
• The financial capabilities of buyers are also taken into account, since natural wood is expensive.

If you use expensive types of wood, the structure will last a long time and look luxurious.

How to make a floor?

Creating a floor from wood cuts with your own hands step by step is simple and quick in time. To do this, follow the following steps:

• the procedure is similar to installation paving slabs, therefore, initially you need to carefully prepare the base, which should be well compacted, even and solid;
• a layer of river pebbles is placed on top of it, and its thickness should vary from 6 to 10 cm;
• Next, the cuts are directly laid, for which they are adjusted using a rubber hammer;
• it is important to constantly check the correct positioning of each element by level, which will avoid distortions and other problems on the coating;
• between the cuts there remains a distance not exceeding 1.5 cm;
• then the seams between the elements are filled; the mixture for this can be purchased at finished form or make your own using clay, lard, lime and sawdust;
• Polymer compositions of high quality are often selected;
• the mixture is introduced into the seams between the cuts, after which it is rubbed well, it is important to make sure that there are no air pockets, and if voids remain, they can cause cracks or water to penetrate under the floor;
• The procedure for filling the seams is repeated after two days.

Thus, according to the right technology It is very easy to create floors from sawn wood with your own hands, and this results in a high-quality and attractive design in any room.

What to do after creating the floor?

As soon as the floor is made from wood cuts with your own hands, you should polish it well. The best way to use this is scraping machine, and after sanding you need to check the coating for cracks. If they are missing, then at the end it is done hand grinding. After the floor has dried, polishing begins; for an environmentally friendly coating, it is better to use wax or linseed oil.

Flooring from saw cuts is considered an interesting choice for any room. It has huge advantages, although it also has disadvantages. It is considered easy to create, therefore, through your own efforts and small financial investments, you can get an original and unique design on the floor.

Nowadays, such seemingly very simple at first glance floorings made from wooden sections of logs - such unique stumps - have become very popular. They are used as decorative elements, objects for various arts, as well as for larger projects, such as paving paths in the garden and on a summer cottage, finishing whole or part of the walls of premises.

Some craftsmen have long tried to make floors from wood cuts with their own hands for own dacha or even apartments.

They claim that the work is not at all as difficult as it might seem, but the result is striking in its natural expressiveness of texture and design.

Almost all materials that surround us in modern house, perhaps beautiful and comfortable, but, let’s be honest, they are artificial, not always environmentally friendly, and sometimes even toxic. Nowadays it has become very fashionable to use more natural materials, in particular wooden ones, both in decorating a room, crafts, pieces of furniture, and in the manufacture of finishing entire walls, floors, ceilings, even paths in the garden and on a personal plot.

As you know, everything new is well forgotten old. End cuts have been used in home and garden decoration for a long time. Both in rich houses and in simple village ones.

They were laid in outbuildings, forges, on the streets, in houses in the form of parquet, but not the kind we know now, but end parquet. It was done in the large halls of palaces, from the most different breeds The wood, even interspersed with soft types, looked excellent.

Do-it-yourself wooden floors from saw cuts

The advantage of floors made from saw cuts is “naturalness”, as well as low cost. The floors are very strong and hard, durable, have great view. They claim that you can do it yourself. They are warm, accumulate and retain heat well from the radiator, stove and just sunlight from the window.

It is a durable material, especially if used special means. For example, there are impregnations for the protection and preservation of wood.

Real wooden parquet will never go out of style. Today we will think about the production of floors from wood cuts, radial or transverse cuts, otherwise they are also called end cuts.

The idea of ​​making an original wooden floor with your own hands is in the air. As far as I know, there is far more than one option for implementing this idea.

I made a selection of photographs, as well as information on one topic - cutting logs as " flooring" Maybe someone will be inspired by this idea and make an exclusive floor for their home from wood cuts with their own hands.

You will never get tired of looking at such beauty - the structure of the tree on each cut is so unique, it is a drawing of nature itself.

As you can see in the photo, cracked logs and what is called “substandard” - tree trunks that are not quite round in cross-section - will also be used for the work. In the intervals between the large ones, small ones will fit well - cuts of small branches and twigs.

Someone decides to use round saw cuts (“rounds”), some even take them with bark, but one must understand that this raises the problem of filling the empty areas between the wooden circles and attaching them to the floor. This floor looks very decorative.

You can make the cuts yourself, many have summer cottages there is such an opportunity, and you can also buy it; now such blanks are very popular, in particular for making various crafts and interior decor.

Some people want to get around this problem by using wooden blocks of strictly geometric shapes - for example, squares, rhombuses, hexagons in the form of a “honeycomb”, while the parts will fit together with virtually no voids. But there is more work involved in processing the source material, and a lot of it will be needed.

In our age of new technologies, some have found a solution. Everyone knows self-leveling floors, which were first made in production premises, as well as in wet conditions. Now there are hobbyists who have this type of flooring at home, it is good for the bathroom or kitchen and does not require special care.

Its advantage is that under the transparent self-leveling coating you can place a drawing, a collage with some interesting objects, I have even seen floors with small coins along the entire length. I don’t know how much this attracts money, but there is undoubtedly a decorative element in such a floor.

Wooden saw cuts - laying and pouring technology

Now let's talk about the most interesting thing - the technology itself. Almost any tree species is suitable for the job, but it is better if they are plants with a dense, solid structure. As we know, for example, hardwood near oak, beech, hornbeam.

In addition to hardness for wood, there is also the concept of stability, this is also important for what we are going to do. We do not take into account exotic species, but if we consider traditional species, then oak and walnut have these two indicators at their best.

Trees such as linden, spruce, poplar, pine, aspen, cedar, and fir have soft wood and are not suitable for flooring. There is a measure of wood hardness, it is measured on a certain Brinell scale. So, for the manufacture of parquet, only those trees are used that have at least average hardness on this same Brinnell scale.

I think it’s already clear that the saw cuts should be very well dried. No humidity is allowed.

Method 1

Here is a description of one technology. End cuts of logs 10-12 cm thick are suitable, but it’s a matter of imagination, you can take absolutely any, lay circles of different diameters in one floor. Lime will also be needed sawdust, wax, clay, linseed oil, lard, water.

Laying as for a mosaic, with minimal distances between adjacent elements. Sand with small pebbles is poured onto the surface in a layer of up to 10 centimeters. Then they lay the saw cuts, pressing them into the sand, making sure that the top level is approximately the same for everyone.

How to fill the space between the round logs? The “holes” are filled with a paste-like consistency: 1 kilogram of fat, 5 kg of sawdust, 1 kg of lime, and about 2 kg of wet clay. They say that it is a good idea to add marble dust or small glass fragments to the composition.

Carefully fill all voids, as well as cracks in the saw cuts, and allow to dry for 2 days. After which the surface should be well polished; a sanding machine will not hurt. Polishing with wax and oil.

Method 2

Here's another description of the process. Sawing wood slices band saw. Place them on the plywood, gluing them with construction adhesive. Fill the seams with a specially prepared solution containing 20% ​​sawdust. After hardening, it is sanded using a machine, and the floor surface becomes smooth and the cuts are clean.

The top of the floor with saw cuts is covered with sealant. I think the mortar is 80 percent epoxy-based self-leveling floor mortar. It is better to take a dark color, but then make sure that dark color did not stain the surface of the wood.

I think at the end you can apply finishing coat, varnish, epoxy, polyurethane-based self-leveling floor.

By the way, some people place saw cuts on liquid concrete, probably for greater reliability, as in the very first photo. So here everyone decides for himself what will be more convenient for him to work with.

By the way, if you want the visible wood surface of the floor to have a certain shade, then this can be done, for example, with stain, immediately after leveling and sanding, before applying the final varnish coating.

In interior design nowadays, saw cuts are widely used to create very beautiful tabletops, chairs, decorative wooden wall panels in eco style. Remember the cartoon about the hedgehog in the fog? There the hedgehog talks about juniper branches. It is better not to cover crafts or artistic compositions made from juniper with anything on top, or with any varnish - they have an amazing aroma that lasts for many years.

Cutting down a tree - most interesting material for creating all sorts of crafts, and it is beautiful in itself. Children enjoy burning and drawing on them.

What else I would like to add is that the end parquet made of transverse rounds does not necessarily have to consist of round mosaic components.

If you have a beam, square or rectangular in cross-section, then it will also be interesting, only here there are certain specifics - the gaps between the parts will be smaller. It looks like real parquet. However, this is parquet, only made using a different technology.

Floor mosaic with examples of geometric design elements

There are different types of floors; sawn wood floors are also a kind of “mosaic”, since they are laid according to the same principle. But then we will talk about the classics. Simple as well as more complex patterns and ornaments with two, three, four color combinations tiles Samples were photographed in the museum; these are the works of old masters.

To such unique wooden floors best fit unusual furniture, also made by hand, on our own. It will perfectly complement the interior. If you follow the link ( large selection different options), then there, in addition to those in the picture, you will also see several examples of tabletops for tables with wood cuts.

The statement that making a floor from saw cuts with your own hands is not difficult, to put it mildly, is not entirely true - despite the fact that technologically it is decorative coating Looks simple, but it's actually packed with mass. various subtleties and nuances.

If you treat such a floor with disdain and underestimate the complexity of its manufacture, the result will be dismal - it will take several years, and the coating will have to be redone. Do you need this? To do this, to do this - at a minimum, such a floor should last for ten years. And at a minimum, its dismantling at the end of its service life should not entail a global, large-scale repair - ideally it should look like, for example, replacing linoleum or laminate. I agree, creating such a covering with your own hands is very difficult, but you need to strive for this - in principle, it is real, and we will tell you how to make such a floor from wood cuts with your own hands on this page of the Dream House website. But first, let's get acquainted with the advantages and disadvantages of such flooring.

Wood flooring photo

Advantages and disadvantages of a floor made from wood cuts with your own hands

Agree, almost all construction and finishing materials that people use today to furnish their living space are mostly of artificial origin. Even if they are not toxic and belong to the category of environmentally friendly materials, they still do not have a natural origin, and from the point of view of the science of Feng Shui, their energy component tends to zero. But this is not the point - unlike them, wood (including its saw cuts) is a creation of nature, which is the first advantage of a floor made from saw cuts. There is no need to rejoice in advance - this is a double-edged sword. On the one hand there is natural wood, and on the other there are synthetic polymer binders that will have to be used as protective coating– in general, the situation from an environmental point of view is twofold and, most likely, negative factors will win here and negate the entire environmental component of the floor.

By and large, here we can highlight only a few advantages that can really be called the advantages of this sex. Oddly enough, this is a decorative component - in fact, it is something that can be done at your own discretion, creating various patterns. And save money by doing the installation work yourself. In my opinion, everything else is far-fetched. Judge for yourself.

But let's return to our strength - a good and durable floor from wood cuts cannot be made cheaply. Spending money for the short term is also a very dubious idea. By and large, nothing but unusual beauty, cannot offer such a gender to a person. This is purely my opinion, but if you think carefully about this issue, you will probably come to exactly the same conclusion. And while you are thinking, we will go further and tell you about two ways to make a floor from saw cuts with your own hands.

Floor made of wooden cuts: an option for a summer house

Why for a dacha? The reason is simple. This is a simplified version that does not involve the use of polymer binders. This floor can really be called environmentally friendly, and it will cost you a minimum. At the same time, the floor will lose strength, aesthetics and other characteristics. In addition, it cannot be washed in the literal sense of the word, since unprotected wood will quickly rot. Such a floor is made from saw cuts in a very primitive way.

Once everything is dry, the floor will need to be sanded. In order for such a miracle coating to last longer, each cut must be thoroughly soaked with an antiseptic. In addition, the wood must be properly dried before laying.

End-cut floors: durable technology

As in the previous case, all wood used for the manufacture of such floors must be well dried and treated with an antiseptic. To achieve different effects, it can be shaded using stain. An important condition creating such a floor requires strict adherence to the thickness of the cut - if in the first case this point is not of great importance, then here differences of 1 mm will result in a large consumption of polymers, which will make the floor very expensive.

In this regard, it is better to think over a device that will allow you to make cuts with maximum accuracy. In addition, they also need to be made as thin as possible.

Such floors are made from saw cuts with your own hands as follows.

In conclusion to the topic of how to make a floor from wood cuts with your own hands, all that remains is to say a few words about self-made removable slats. They are made in exactly the same way, but not on concrete or wooden base, and on sheets of plywood, along the edges of which they are cut manual router connecting grooves. Believe me, it is not so difficult - but as a result you will get some semblance. The sizes of such fragments can be any - naturally, within reason, so that they can be easily laid with your own hands.

Interior design made in eco- and ethnic styles is becoming increasingly popular. Currently, designers are focusing on the naturalness and originality of the materials used. Thus, the decor from wood cuts in the interior looks stylish and organic.

Adds extraordinary comfort and warmth to the atmosphere of the room. In addition, such material is an environmentally friendly product, resistant to many types of influence and does not require large material costs. You just need to show your imagination - and ordinary cuts of wooden blocks will become beautiful decoration your house. Today we’ll talk about how cutting wood in the interior with your own hands can advantageously emphasize the individuality of your home.

Wood cuts as finishing material for house walls

Wall surfaces are the most convenient and extensive area for decorating a room. Here you can embody the most daring and creative ideas in the design of the room. This time as decorative element We will use wooden slices. They are smooth transverse layers of a tree trunk. Each layer has its own original and unique pattern, which is obtained from the growth rings of wood. Well, are you ready to get to work? First, let's find out how to make wood cuts for the interior. The process is extremely simple and even a beginner can handle it. Often, a transverse cut (also called an end cut) of a log takes part in the design.

1. We cut tree trunks into plates of the thickness we need. Their diameter can be different - this way the decorated surface will look even more beautiful.
2. We clean the cut from sawdust and shavings, you can also remove the bark.
3. We treat the layers with stain or special paint.
4. We apply an adhesive solution to each cut and place it on the wall.
5. You can lay out the wall plane partially or completely with cuts.
6. We wait for the glue to set and finally cover the surface of the glued sections with varnish.

Types of wood used for cuts in decoration

Important! The interior fits well wooden elements, decorative stones or plaster. Applying wood material for decoration, it should be taken into account that when cutting a log, cracks and cracks open. Consequently, layers of wood must undergo carpentry processing.

And provided that the wood material is planned to be used in a functional role, then I advise you to restore the cracked sections of the cut. To do this, fill the damaged area with a special resin solution. After the resin has dried, we mill and sand the layer.

At decorative design The following types of wood are used:

• spruce;
• pine;
• fir;
• ash;
• birch;
• oak.

Completing finishing work, sawing of any type of wood must be covered paint and varnish composition. We discussed above how to process tree cuts for the interior (stain, paint, varnish).

• The main condition for quality work is a well-prepared and cleaned surface. The wall plane must be leveled and treated with a primer.
• Decide in advance exactly how you will decorate the surface. A wall with a partially covered saw cut will look good. It is not recommended to lay all the walls of the room completely wooden plates, since the room will seem too small and overly cluttered.
• Partial installation looks natural in bedrooms at the head of the bed, in living rooms near fireplaces or modern electric fireplaces, as well as in the kitchen or hallway.
• Decorating surfaces with wood cuts is excellent for country and country houses.

Do-it-yourself panel from wooden saw cuts

The next popular way to use wood slices is in wall compositions. Their execution requires various types of wood and fragments different sizes. In fact, this is an independent abstract painting made from wooden pieces. Wood plates are suitable either peeled from bark or covered with it. The compositions are also composed with the addition of stumps and branches. Decorate different colors or left in natural colors. Such a panel made from wood cuts in the interior looks original and elegant.

Flooring made from wood slices

Wooden materials are often used to cover floors. Round log plates are also widely used for this work. As a result, the surface is durable, environmentally friendly, aesthetically attractive and unusual.

So, let's see what technology is used to lay tree cuts on the floors in the interior. Finishing a floor surface is reminiscent of working with ceramic tiles. Installation is carried out using a special solution. After installing the elements, they are sanded and covered with several layers of varnish. The surface should be decorated using the following wooden plates:

Advantages of floors made from saw cuts

The saw-cut floor is made from natural materials.
Relatively cheap.
Very beautiful and pleasant to the touch.
Easy to do (relatively).

Flaws

Unfortunately, this type of flooring requires quite a lot of wood good quality, so it is recommended to cover only small areas.
Floors made from saw cuts need to be serviced approximately once every 2 years.

What will you need?

Round stones 10-12 cm thick, sawdust, limestone, clay, linseed oil, beeswax, water, lard.

Note: It is important that the cuts are very, very well dried (not to mention working, no moisture).

The process of making such a floor is relatively simple and very similar to laying paving slabs or paving stones. You need a hard, well-compacted surface, on top of which we pour a layer of river pebbles (about 6-10 cm). Then using rubber mallet Let's start laying the cuts. We tap and check with a level that the floor is level and that none of the cuts stick out or go too deep. As a rule, after laying, the distance from the surface of the cuts to the sand level is about 4-7 cm, and the distance between the cuts should be approximately 1-1.5 cm.

Mixture for filling joints

For a floor area of ​​about 5 square meters In a 15-liter bucket, add 1 kg of lime, 5 kg of sawdust and 2 kg of clay with water to 1 kg of melted pork fat. After thorough mixing, you should get a paste-like mass. You can also add marble dust.

We introduce the mixture into the distances between the cuts and rub it well, as much as possible, without leaving air pockets. It should fill the gaps. It is very important that there are no voids left, otherwise cracks and water leakage cannot be avoided in the future. The remainder of this mixture can also be used to fill cracks in saw cuts (if applicable). After the last seam is covered, we leave our floor to dry for 1-2 days. If cracks appear, fill them.

After complete drying (another day or two), we polish the floor from the saw cuts well. It is even recommended to do curettage. You can rent a scraping machine to achieve the perfect effect. After this, check very carefully to see if there are any cracks.

Finally, polish with beeswax and linseed oil.

p.s. And this is an ancient “pavement” made of saw cuts, which the craftsmen gave a hexagonal shape (the shape of a honeycomb), it is more than a hundred years old.

Please rate this post: