Deck chair: types, materials, options, drawings, making your own. Do-it-yourself home-made chaise lounge for a summer residence Do-it-yourself wooden lounger drawings with dimensions

The word "chaise lounge" is immediately associated with comfortable rest Outdoors. In addition, a comfortable portable chair will emphasize the style and individuality of a summer cottage or garden plot. A store-bought chaise lounge can be quite expensive, but you can easily assemble it yourself from improvised materials.

Chaise lounge - the general principle of design, varieties

Any deck chair is a folding chair on a frame, often with an adjustable backrest. The word "chaise lounge" comes from the French expression Chaise-longue - "loafer".

Variety by purpose

Depending on the purpose, sun loungers have a different configuration.

1. For cottages and home gardens.
2. For beach.
3. Baby chair.

Variety by design

By design, sun loungers can be seated and recumbent.

1. Standing folding chaise lounge made of wood with a solid seat. Most often made from wooden slats, and not from plywood or sheet plastic, to facilitate construction.
2. Standing folding made of wood with fabric.

   Fabric seat can be easily removed for washing or transport

3. Stand-up folding aluminum tube with fabric seat.
4. Lying folding with a wooden seat.
5. Recumbent chaise lounge made of aluminum tubes with a fabric seat. In fact, it is very close to the cot so familiar to all of us.
6. Hanging deckchair.

Photo gallery: the variety of sun loungers has no limits

Eco-friendly products are popular with summer residents Chaise lounge with a plastic seat in a classic crate is suitable for the beach Chaise longue may be a variety upholstered furniture Chaise lounge "Leonardo" is equipped with a mattress The fabric for the seat should be strong and dense, not subject to stretching. The simplest folding garden chaise lounge "Valdai" - the most a budget option Non-folding sun loungers are best used permanently Chaise longue Cosatto - minimalistic plastic and metal Chaise lounge CHAISE LONGUE is made of thick plywood

The choice of design and material for construction

You need to clearly understand what you would like to receive and what opportunities you have. If needed solid construction, and weight does not matter much, then you need to focus on a metal or wooden deck chair with a wooden seat. The easiest way is to make such a seat from pallets - there is a ready-made assembly of boards on the frame, but the boards themselves are of poor quality and will require long processing after assembly - sanding, painting. Making a lounge chair from bent steel pipes requires skills in handling welding machine. The finished structure will be very strong, but heavy. If, on the contrary, you need an extremely lightweight and space-saving design, then think about a chaise lounge from the frame of an old folding bed.

But the easiest option to make is the usual wooden deck chair with a fabric seat.

Future deck chair - drawing and description

We settled on a simple wooden structure: bars connected by bolts with nuts and washers. The strength of this deck chair is given by three slats in the back, they also allow the chair to transform. The seat made of durable tent fabric is fixed on two round bars.

Tools and materials

We need tools:

• saw;
• drill;
• wood file and sandpaper.

Metal fittings and other little things:

• bolts and nuts - 4 pieces;
• washers (under the bolt head and nut) - 8 pieces;
• joiner's glue;
• screws;
• reinforced thread for a sewing machine.

Ingredients for wood preparation:

• impregnation against decay and moisture;
• primer (linseed oil or other);
• paint or stain.

Table: necessary parts for a sun lounger

It is necessary to carefully approach the choice of fabric for sitting, it should be hard and comfortable, should not wear out quickly. The best option- awning fabric; but any other dense fabric is also suitable - tarpaulin, denim, canvas. Well, if it is bright and not light. It's smarter and more practical.

Preparation for work

All bars must be sanded, starting with coarse-grained skins, ending with the smallest. It is advisable to impregnate them with a special anti-rotting impregnation or water-repellent impregnation, then prime and paint or stain. Then the deck chair will serve you for many years in any conditions.

Chaise lounge assembly

1. You can start with the frame of the back of the deck chair. A beam with a section of 2 × 6 × 61 centimeters will be the main bearing link, so we fasten it very carefully. In the back of the seat we mount the crossbars. With the help of a stop that changes its position, the backrest tilt changes. At the same time, these crossbars work as stiffeners. You can not attach the planks, then in their place it is necessary to make cutouts 20, 25, 30 and 35 centimeters from the rear edge of the structure. Be sure to leave a centimeter gap between the two bars to secure the fabric seat.
2. According to the drawing, we drill the necessary holes: on the back - two, from the edges - 41 centimeters each; on the seat from the top edge - 43 centimeters; on the bar to support the back - in the center.
3. Then we combine the back and seat. We check the alignment of the holes. We connect them with bolts and nuts. Be sure to put washers between the wooden parts.
4. We connect the elements of the frame. We mount the back support. A round bar is inserted into a hole drilled for it with glue.
5. We fold the pre-cut rectangular piece of fabric in half and sew it with a reinforced thread with an indent of one and a half centimeters from the edge. We turn the stitched part inside out, make a drawstring for a round bar with a line. We do the same on the other side. We put it between the planks and fix it with a wooden rod. With this decision, it will be easy to remove the fabric seat and wash it, along with this there is no risk of falling out of the deck chair - the seat is firmly fixed.

   Fabric can be removed without much effort

The nuts have the ability to unwind, but they cannot be tightened tightly - otherwise the deck chair will not be able to easily unfold and fold. To avoid untwisting, you can add one more locknut; or you can put nuts on glue or paint, only then do not touch the structure for some time so that the glue or paint dries. But at the same time, it is first necessary to adjust the tightening of the nut so that the parts move freely relative to each other.

Here is another approximate drawing of a slightly different design - all parts, dimensions and connections are clearly visible here.

Further care

If you carefully approached the preparation wooden parts, That special care will not need. But over time, all sanding, impregnation, priming and painting should be repeated by removing the fabric seat. The removable seat can be removed when it rains and can be easily washed when dirty. You can also make it from washable fabric. For the winter, it is better to clean the sun lounger indoors.

The simple process of making a deck chair with your own hands will please any craftsman with a wonderful end result. A variety of materials and fabrics will allow you to be creative and create original item. And when proper care The chaise lounge will serve you for many years.

Do-it-yourself sun lounger or deck chair is quite easy to make. Such a homemade simple garden accessory is not only functional, but will also become a real decoration. adjoining territory. Such peculiar clamshells differ not only in size, but also in appearance.

Chaise lounges and deck chairs for summer cottages: the main types

Chaise longue (Chaise longue) - a popular folding easy chair for relaxing in a reclining position. Such beach structures are easily transformed. A simple wooden accessory can be a great option not only for the beach and outdoor pools, but quite often used as garden furniture , replacing a comfortable and practical chair with open verandas or terraces. There is both an adult and children's version chaise lounge, for the manufacture of which solid wood, durable plastic, durable aluminum or synthetic fabric are used.

Depending on the design features, there is the following conditional classification of such products:

• monolithic chairs, represented by components that are fixedly connected to each other, with high level strength and designed for heavy loads. The feature is safety. The disadvantages include the inability to fold the structure and make changes to the angle of the backrest, which complicates the process of storage and transportation;
• monolithic chairs with special inserts, characterized by very high rates of decorativeness. They have additional fragments made of various materials, which can adversely affect the level of reliability and strength of such a design;
• portable models, characterized by the presence of special mechanisms, make it easy and simple, without much hassle, to change the position of such a lounge chair. There is also a great opportunity to change the angle on the footrest and headrest. The folding model is very compact and suitable for transportation in an ordinary car.

Varieties of sun loungers (video)

Models with a metal base are extremely rarely performed independently and are distinguished by the presence of aluminum or steel frames with fixed fabric durable canvases. The advantages of such chairs include low weight and mobility. and a high degree of operating comfort. Among other things, modern materials are distinguished by a high level of resistance to various adverse external factors, as well as pollution that can be obtained during operation.

How to make a wooden deck chair with your own hands: drawings and stages of work

A drawing and diagrams for the manufacture of a wooden deck chair are presented in in large numbers, but to independently perform such a design, you can also use a simple step-by-step instruction.

Kentucky Armchair Workshop

A very original model is the Kentucky version, completely assembled from wooden bars. This chair can be folded, it is very convenient to store. For self-production, you will need to purchase:

• galvanized wire with a diameter of 0.4 cm;
• galvanized brackets in the amount of sixteen pieces;
• hammer and wire cutters;
• fine-grained sandpaper;
• wooden bars measuring 50x33 mm;
• antiseptic composition and wood varnish, as well as a brush.

It is easy to assemble the structure yourself. Holes are drilled in the bars with a diameter of one and a half millimeters more than the thickness of the wire used. If necessary, you can replace the staples and wire with galvanized studs, the edges of which are fixed with nuts and washers.

A simple option for making a sun lounger out of wood for sunbathing

This option is easy to manufacture, but rather bulky and does not allow you to change the position of the back. Before proceeding with self-production, it is necessary to determine the dimensions of the structure. The optimal length of the lounger is considered to be two meters with a width of 0.6 m.

The main stages in the manufacture of a model of a sun lounger made of wood are as follows:

• production of a frame base of a lounger from four sidewalls, a pair of which are two meters long, and two are 60 cm long;
• sheathing the outer part of the frame with polished boards, 2.5 cm wide;
• fixation on the long sidewalls of four legs with an indent from the edge of the structure of 80 mm using galvanized self-tapping screws;
• best used to make the legs of the sunbed stable wooden blocks 100 mm long.

At the next stage, the lattice is assembled, which is the main part of the outdoor lounger. Using an electric wooden board, it is necessary to cut boards with dimensions of 10x60 cm. All serrations and roughness on wooden blanks must be removed with fine sandpaper. Finished boards are fixed with galvanized self-tapping screws on the frame base of the deck chair and a gap of one and a half centimeters, which will allow you to get a convenient and attractive product.

Somewhat less often, models with a comfortable adjustable back are performed. In this case, the lattice should be divided into a couple of parts, one of which is used directly as a sunbed, and the other part serves as a comfortable headboard. Two parts are installed on connecting boards, and standard door hinges the right sizes. To fix the headboard in a certain position, it is used cross bar, which is set to inner edge frame base of the structure. To such a bar, with the help of galvanized screws, the support post of the headboard is fixed. The finished structure must be carefully sanded, and then coated with varnish-based compositions or special varnishes.

How to make a deck chair from solid wood (video)

How to make a folding fabric chaise longue with your own hands

One of the most convenient and easy to self-manufacturing options is represented by a fabric seat on a frame base. Such a model is quite mobile and can be transferred from place to place, as well as easily folded to an almost flat state. The following materials are used in the manufacture:

• furniture bolts and nuts D-8mm;
• two wooden slats of round section 65 cm long;
• two wooden slats of round section 50 cm long;
• slats of rectangular section 65 cm long with a section of 25x60 mm;
• a piece of durable and water-repellent fabric measuring 200 x 50 cm.

You will also need to purchase a round file and fine-grained sandpaper, as well as PVC glue. Experts recommend giving preference to slats obtained from wood species such as oak or birch. As a durable and reliable fabric, types are used that are most resistant to abrasion and are characterized by increased strength indicators. Mattress teak has proven itself best, as well as tarpaulin, denim and camouflage fabric, and canvas.

Manufacturing technology of a folding fabric model:

• cutting laths of standard length and careful grinding of their surface sandpaper;
• with a distance of 0.7 and 0.4 m from the corners, holes are drilled, after which they are polished with a round needle file;
• so that during operation the position of the backrest changes, with a distance of 8.0 cm, three or four cutouts must be made;
• with a sufficient indent from the two ends of the wooden slats, holes are drilled for arranging the seat;
• the end part of the round wooden slats are lubricated with PVA glue and installed in the drilled holes.

The assembly of the frame ends with the installation of a fabric seat. Seat sewing is carried out after measuring the finished frame. The crossbars are wrapped around the edge of the cut and fixed with standard furniture nails. It is also allowed to loop fasten the fabric seat to the crossbars.

We buy a ready-made deck chair: characteristics of the species and selection criteria

To date, a deck chair is a very popular and sought-after product, mainly as a comfortable and beautiful garden furniture. All modern deck chairs or deck chairs are divided according to the material used in the manufacturing process. A significant number of models are made of reliable and high-quality plastic, but there are products made from processed wood and modern metals. Various combined models are especially popular., in which the frame base is made of wood or steel pipes, and the seat is made of wood or fabrics. Some beds have wicker details based on artificial or natural fibers.

Factory products made of modern plastics of different colors are resistant to negative external influences, including ultraviolet, precipitation and wind. Wooden factory products are characterized by surfaces that have undergone a three-stage treatment, represented by a primer, subsequent painting and decorative trim, which allows you to operate such a deck chair in conditions high humidity, open air.

All manufactured products are divided into folding and non-folding models. and also have a rising or falling footboard and headboard. As a rule, the position of the backrest is changed with the help of grooves located on the supporting frame. For example, the Lucca chaise lounge from a German manufacturer is made on the basis of aluminum and modern textiles, and the position of the backrest can be adjusted without getting up by loosening the locking levers located in the access area.

In recent years, owners of suburban real estate are increasingly giving preference to a comfortable and very original variety of a deck chair - duchesse breeze. Such a modern model is a design represented by a very spacious and deep armchair, with a convenient side stool that can be placed next to the main part or fixed by fastening. The sunbed can be folded, transforming into comfortable armchair or a chair that is convenient for transportation. Most modern models have a raised and lowered footboard, as well as a retractable sunscreen, convertible armrests, as well as spacious compartments for storing various accessories.

How to make a deck chair from a barrel (video)

Wooden sun loungers or sunbeds are not only very comfortable for summer holiday, but also, of course, can become an ornament to any backyard territory. Despite the fact that the cost of such a product is quite affordable, in recent years, owners of suburban real estate are increasingly making sun loungers on their own, which allows you to get a bright and stylish, very individual and durable design with minimal cost time and effort.

Equipping a place to relax near a private house, it is impossible to do without a sunbed. Here you will need the ability to make a comfortable deck chair with your own hands. It is a folding chair-lounger, on which you can sit in a reclining position.

Chaise lounges are metal, plastic, wooden. Often these materials are combined with inserts made of strong textiles, or they are complemented by light overlays in the form of pillows and mattresses.

Having decided to make a chaise lounge for a summer residence with your own hands, choose wood as the material of manufacture. She is easy to work with. A fully wooden sunbed will turn out to be reliable, strong, and will serve you for a long time. Detailed description how you can make a sunbed with your own hands, diagrams, design drawings and photos will help to avoid problems in work.

Lounge chair for relaxing in the garden or by the pool

On such a deck chair for giving, it is convenient to sit in the shade of plants reading a book or take a place in a sunny meadow for a beautiful summer tan. Despite the fact that it is a very simple design, the lounger can be installed in three positions: completely horizontal or with two options for raising the back. Moreover, one of the simplest structures is used for lifting. But it is known what easier mechanism the less prone to breakage.

Even an inexperienced master can make such a deck chair with his own hands. It will have convenient parameters even for an adult tall person: width - 60 cm, length - 215 cm.

Materials and tools

The material from which we will make a lounge chair will be a pine beam and a board. Their dimensions, along with a list of tools and fixtures, are listed below:

• 3 bars 4000x100x50 mm;
• 4 boards 4000x80x25 mm;
• 2 studs for attaching the back to the frame;
• drill with drills;
• self-tapping screws;
• sandpaper;
• putty for wood;
• paint (color of your choice);
• carpentry glue to strengthen fixed joints;
• roulette;
• square;
• marker;
• saw or power saw.

Description of work

Before starting work, carefully consider similar drawings in order to understand the logic of subsequent actions.

1. First of all, we assemble a frame from a bar. We take 2 parts of 2150 mm and the same amount of 500. We make connections with a drill for self-tapping screws. To increase reliability, we pre-lubricate the places to be joined with glue.
2. Let's start working with the fixed part of the surface. We cut a board with dimensions of 4000x80x25 mm with a saw into segments of 60 cm. In total, 13 such parts need to be made.
3. Leaving between the boards (60 cm long) gaps of a centimeter, we fasten them with self-tapping screws to the frame. We control the angle of connection of the strips at 90 degrees.
4. We proceed to install the legs of the deck chair. For greater stability, the legs in the seat area must be made double. For them, we take 4 bars 35 cm long. We glue them in pairs, then fasten them to the base with glue and self-tapping screws. Any surplus adhesive should be wiped off immediately. This will help in the future to avoid problems with the processing of these areas of wood.
5. From the side of the headboard, we also fasten single bars-legs 35 cm long. Then we attach the second bars to them, which are 20 cm shorter than the first ones. We fasten them so that the lower edge of the parts coincides (as shown in the figure).

1. Let's start creating the back of the deck chair. We will assemble the frame of this part from a pine beam measuring 100x50 mm. Prepare for the back frame 2 pieces of 880 mm and 3 pieces of 390.

The dimensions of the base of the back are chosen so that it can fit inside the main part of the deck chair (with small gaps for free movement).

1. Back upholstery. If you want to give the product a more attractive look, fasten the trim strips along the length of the frame. At the same time, round the top edge of each board on both sides. Keep a distance of 10 mm between the strips.
2. To fix the back on the frame for its free movement, you need to prepare holes. Measure 70-80mm from the edge of the last seat board. At the indicated distance, make holes with a drill that pass through the frame of the backrest and deck chair. Place a hairpin on each side of them.
3. The mechanism for lifting and fixing the moving part is based on placing bars in special recesses that will not allow the back to fall down. The first selections must be made on both sides of the main frame of the deck chair, stepping back 7-8 cm from the hairpin. The dimensions of the recess should be 10 cm wide, 5 cm deep. We make the second recesses at a distance of 20 cm from the first, 5 cm deep and 5 cm wide.

If you place the first support bar 60 cm long horizontally in the first recess, the back of the chaise longue will lock into the "chair" position. The person sitting on the chair will be comfortable to sit. To change the backrest level, the first bar should be moved to the shortened legs, and the second support bar (60 cm) should be inserted vertically into the second recess. You can fully expand the deck chair by removing the second bar and lowering the back. In this case, the small frame will become on the first bar placed on the shortened component parts legs.

1. Finally, take care of finishing the deck chair. Treat the bumps with putty and hide the screws. After drying with sandpaper, sand the corners, surfaces so that there are no sharp parts, burrs and roughness. Cover wooden product stain, this will protect the material from harmful influences. Paint your chaise lounge chair the color of your choice.

The garden chaise longue for giving is ready. You can equip them with a picturesque corner of the backyard and enjoy a pleasant stay.

Compact chaise longue: comfort wherever you want

A folding deck chair, of course, cannot be called a sunbed, it looks more like an armchair. But the product has a number of other advantages. The design is very simple, so making it yourself is not difficult.

The chaise longue has a small weight, compact, so you can easily move to a new place with it. And if you show diligence in work and care when choosing materials, the product will serve you for a long time. personal plot dachas not one year.

What do you need to make a folding deck chair?

Before you start, prepare:

• For the back frame: 2 parts - 1219x38x19 mm, 1 - 610x38x19, 1 - 648x38x19, 1 - 610x64x19.
• For the seat frame: 2 parts - 1118x38x19 mm, 4 - 603x38x19, one - 565x38x19 mm, one - 565x64x19 mm.
• To support the back: 2 parts - 381x38x19 mm, wooden dowel with a diameter of 12 mm and a length of 648.
• 2 pieces thick fabric by 1372x578 mm.
• 2 wooden dowels with a diameter of 12 mm, length - 559.
• 4 bolts with nuts 50x6 mm.
• 12 washers.
• Screws 50x4 mm.
• Glue.

Work sequence

The joints must be additionally glued. After pressing the parts, immediately remove excess glue.

1. Consider in detail the drawings, diagrams with the dimensions of the deck chair. They will help to understand the principle of its folding.
2. Drill pilot holes, then countersink them for screws.
3. Assemble the frame for the back of the sun lounger. Attach the bottom bar 50 mm from the bottom edge. Between the 610x64x19 mm bar and the top piece, leave a distance of 10 mm to secure the fabric.

1. Assemble the top of the seat frame in the same way as the backrest. Attach the first bottom plank 203 mm from the bottom edge of the side plank. We fasten the next 3 boards with a gap of 13 mm from the previous one.
2. We connect the seat and back frames by tightening them with bolts and placing washers under the bolt heads. We also place washers between the racks of the frames.
3. We fasten the support strips for the back with bolts with washers.
4. We place the round dowel on the glue in the drilled hole of the planks without gaps.

1. It's time to make a seat out of fabric. We put together 2 pieces of fabric with the right sides inward, sew, stepping back 60 mm from the edge. On the one hand, we leave a segment of about 100 mm unsewn.
2. We turn the workpiece inside out and sew the sides along the length.
3. We lay cavities (for wooden dowels) across the width on both sides, stitch them.
4. We thread the dowels into long holes in the fabric.
5. After finishing work with wooden base(grinding, coating with a protective agent, painting) put the seat in place.

Folding chaise longue for your dacha is ready. Drawings, images helped to create a practical, comfortable, lightweight chair for outdoor recreation.

Camping in nature is a great way to unwind. Some go to the village, others go to the country, where comfortable sun loungers are waiting for them, allowing them to forget about environment and take a nap. Such attributes relieve tension from the spine and almost all muscles, you just have to choose the most comfortable option for yourself: a rocking chair, a regular folding chair or a sunbed.

Easiest to buy now ready chaise longue, choosing it for the interior of the cottage or for your individual needs. But not everyone has the financial means to do so. A model made by oneself is more appreciated and fully corresponds to the taste of its owner.

Kinds

Creating homemade deck chairs is not difficult. Before starting work, you need to choose the type of this furniture that you want to bring to life. There are several of them:

• Armchair. As a basis, you can take elements from a crib or folding bed. Armrests are custom made.
• Sunbed. The creation process takes about four hours. The product can be made of plastic or wood, which is ideally sanded and varnished.
• Rocking chair. Its back is at an angle, so it is possible to lie down, relax, take a nap. At the same time, it is important to make the bottom of the attribute strong so that it does not loosen when swinging.

In addition to the distribution of products in appearance, there are variations in the types of structures:

• Monolithic. When it is created, all elements are fastened together, so disassembly is impossible. Such a deck chair is strong and durable, but the back is not adjustable here and the product as a whole does not add up. As a result, transportation problems may arise.
• Portable. Reliable and compact folding attribute has a special mechanism that allows you to easily adjust its position.
• Soldered with inserts. A practical product will decorate any interior due to its attractive appearance. But inserts from other materials do not guarantee durability.

If the chaise lounge is made of durable materials, it can be supplemented with a blanket, pillows and other items for a comfortable stay.

Possible materials

When choosing a deck chair material, you need to consider its location. It can be a summer cottage, a beach, a special place by the pool, or even at home. There are the following options:

• Wooden. This design is durable, comfortable, environmentally friendly, different in shape and appearance. The only drawback is a lot of weight. To facilitate the transfer of the deck chair, wheels are attached to the legs.
• Plastic. Products are lightweight, inexpensive, easy to care for. Of the negative sides - fragility.
• Fabric. Attributes are convenient and compact. The frame can be made of boards, metal, profile pipes.
• From rattan. Against the backdrop of nature, these sun loungers look incomparable. They are environmentally friendly but expensive. If you have skills in weaving, making such an attribute for relaxation is easy.
• From PVC. The same lounger with a fabric base, however, the basis of the frame is PVC pipes.

Making a deck chair yourself is not difficult, you need to correctly determine the dimensions of all the elements and spend several hours assembling them.

Scheme of manufacturing various options

Before you start making an attribute for relaxation, you need to draw a diagram of it. She plays important role, because it determines the dimensions of the elements for the product, their shape, quantity and other details. You can make such a scheme yourself, but not everyone can do it. Therefore, we give an example of such a scheme. A high-quality deck chair (fabric) will turn out according to such a drawing with dimensions.

It remains only to find materials to create a sunbed. There are also other drawing options different types sun loungers.

From a wooden lattice

Such a deck chair is quite durable, reliable, and its back can be adjusted. For such a model, one should take wood slabs from conifers, as they are resistant to climatic changes. Here is a diagram with the indicated dimensions:

All work is carried out in stages:

• A frame is created from the bars, it is fastened with the help of metal corners.
• Boards are attached to the outside, and legs are attached to them.
• The plate is sawn with a jigsaw and a wooden grate is made.
• The adjustable backrest is separated from the main part of the attribute and fastened to it with a door hinge.
• A fastening bar is attached in the area of ​​\u200b\u200bthe headboard, and a stand is attached to it with screws.
• The finished product is polished and varnished.

If in the future the sunbed will often move from one place to another, it is better to attach wheels to its legs, because the weight of the attribute itself will be considerable.

Fabric on the frame

The work on the frame occurs in this order:

• Ready base is taken from a folding bed or baby cot. In the absence of such, slats are taken desired length or cut and grind.
• Holes are drilled in the main frame, the other is supplied with cutouts (4 pieces) for adjusting the backrest.
• Holes are made at both ends of the rails to install the seat.
• Round crossbars lubricated with glue and installed in the holes.

Now you should prepare the seat itself. To do this, you need to fold the base of the product and measure the length of the canvas. It should sag to comfortably accommodate the wearer. On sewing machine all edges are processed. Then the transverse round bar is wrapped with a cloth and nailed on both sides with small carnations. The attribute is ready and you can enjoy your vacation.

from pallets

This is the easiest way to create a sunbed. Such a product is light in weight (it is easy to move it to different places) and practical (you can put a mattress on it for more comfort). The work takes place in the following order:

• Pallets are dismantled, all nails are pulled out.
• A frame is made from two even boards. They are placed edgewise and parallel to each other, and the rest are sawn in half and attached to the base. The result is a seat with two support legs behind.
• To create the front legs, a board from a pallet is sawn into two equal parts.. Then, with the help of bolts, they are screwed to the seat base and tightened with nuts through washers. The cross bar is necessary to strengthen the legs.
• The back is made from two boards, which are connected to the seat frame with bolts, nuts, washers. This should be done under equal angle. After that on support boards screws are attached to the boards for the back. Behind it, a bar is attached to the rear legs - this is necessary for the strength of the structure.

The final step is grinding the attribute with an emery sheet.

To prevent rotting of the boards, the product is varnished.

From polypropylene pipes

The drawing of such a deck chair is identical to the fabric one, only the wooden frame is replaced here with polypropylene pipes. To create a product, you need 2-inch pipes, fittings in the form of the letters "g" and "t" 8 and 6 pieces, respectively. The assembly process has several stages:

• First, a vertical bar is made. A t-shaped connector is taken and pipes of 30 and 45 cm are fastened with it. L-shaped fittings are put on the ends. The lower vertical is also fastened and the two sides are connected.
• An important point: the horizontal bar must be solid and have a length of 66 cm. O on is mounted closer to the connection with the letter "t", which must be directed to the inside of the structure. The other side is two 30 cm pipes, fastened with a T-fitting. This tee must be rotated from the oblong side by 45 degrees. The end result is a rectangle.
• For a rotating seat, a 5 cm pipe is inserted into the triple connecting element, which is fixed with the same part. This will be the base of the horizontal frame.
• The long sides of the horizontal frame are made in the same way as the vertical ones. For the cross bars, a tube 30 cm long is taken and another, consisting of 2 x 20 cm with a tee fitting. The result is a rectangular figure in the same figure.
• The seat will be between the short section horizontal section and oblong vertical. After adjusting the level of inclination, a support is inserted at the back.

The frame is ready, which means that now you need fabric base. To do this, take a dense canvas and fix it on the base.

"Kentucky"

Such an attribute for recreation has a number of advantages: compact, convenient, easy to fold, light in weight, durable and reliable, takes up little space when folded. It looks like a chair high back. Unusual way assembly looks original. To do this, you will need bars, galvanized wire (diameter 4 mm) and the same brackets for fixing the wire (16 pieces), wire cutters, a hammer. The process goes like this:

• A protective coating is applied to the bars. But the parts must be ready for assembly.
• Holes are made. However, they should be larger than the wire by a couple of millimeters.
• The bars are going interesting way, because of which the whole design looks creative. Here is the diagram:

At the end of the whole process, the chair gently rises and unfolds. This folding product looks stylish and modern.

original ideas

People with creative thinking do not always want to see on their territory simple sun loungers, so there are several original ideas creation of models for recreation.

From birch chocks

This design has unusual view so you have to work hard. For such a lounger, birch logs with a diameter of 75-120 mm are needed. But one must take into account what larger diameter chock, the more the finished product will weigh. Before starting work, stock up on the following tools:

• electric saw;
• drill;
• set of drills;
• self-tapping screws;
• staples.

Do-it-yourself deck chair (drawings with dimensions will be provided in the article below), it is quite simple to manufacture. But before buying the material, it is better to calculate the amount of wood in advance, and the fabric is selected stronger.

Previously, during periods of shortage, they used ordinary tarpaulin and an untreated dry board for home-made furniture of this format.

It was possible to meet a comfortable and thoughtful sunbed (aka a deck chair) only in places for recreation. Now everything is simpler, and almost for free, creating comfortable garden sliding furniture for yourself and your family is as easy as shelling pears.

Kinds

For the simplest reclining chair made of wood, aluminum or plastic, there are the following types or types:

1. Children's sun lounger.
2. Beach.
3. Country.
4. For a house or apartment.

The difference is always in the environment, and if at home you can put a compact sliding chair like a deck chair, then at the sea or by the pool there is always similar furniture that is resistant to moisture (salt).

But to make it simple, convenient and inexpensive, let's consider just a simple type of deck chair on two frames, with a crossbar and a fabric back. This is a portable type of furniture for relaxation, so everyone can assemble the same sliding chairs for the whole family.

Self-manufacturing

Where to begin? Well, of course, with the size. What will be the manufacture, the deck chairs will only be stronger.

Drawings and dimensions

And you will need to assemble two frames of this format for one deck chair:

Which will give a simple design as a result:

Let's start like this:

1. Choose pine board or bar. If it is not possible to bring / order, then we are looking for birch pallets. Now it's easier to get quality material. Any type of wood must be processed. Moreover, we plan, skin and paint before assembling into one whole. Already the second layer of paint or varnish can be applied at the end.
2. Next, we look at the drawing and notice that there are power elements. These are crossbars that necessarily crash into the frame. And for such a procedure, a hammer, chisel or carpentry power tool was created ( manual frezer, suppose). Here it is important to do as it was always in the stools of the Soviet period: fastening the "thorn-groove" to half the thickness of the frame bar. And everything will fall into place. It won't be easy to unroll.
3. The power bars on the frame are the same boards, but we attach a decorative or ordinary tarpaulin to them. Synthetic fabric will work too. But we make sure that it does not stretch, otherwise the fifth points will eventually go into the ground.
4. So, two frames are ready, and two stops on movable hinges. We assemble the structure together by bolting or special movable fasteners (the store will always prompt you with a choice).
5. Collected. The fabric remains. But it needs to be cut out. More on this later.

For simplicity, we give dimensions for the drawings.

1. Back. Frame. 1219x38x19 mm in the amount of two pieces. 610x38x19 mm one piece. 648x38x19mm is one joke. 610x64x19 mm one piece.
2. Seat. Frame. 1118x38x19 mm 2 units. 603x38x19 mm 4 units. 565x38x19 mm one unit. 565x64x19 mm one unit.
3. Back support. 381x38x19 two pieces. And a dowel made of wood longer than 650 mm in the amount of 1 pc.

Materials and tools

To make a solid, proper seat, look at the following drawing:

It is necessary to fold the cut piece of dense fabric and sew indents. But you can make a two-layer coating without saving. To do this, fold the measured segment inside with the front sides, stitch along the sides. But in the center (similar to a pillowcase) we leave space for carefully turning the seat inside out. front side. Then you can simply secure the longitudinal seams with one more stitch.

But needs loops or pockets to connect everything together. So we measure out the required size of pockets already on a wooden frame in advance, then we tuck our rag and stitch it. It is important to measure so that there is an average condition between overly stretched and sagging.

In working with fabric and wood, we need to take:

1. Plane.
2. Hacksaw.
3. fasteners.
4. Hammer.
5. Chisel.
6. Sewing machine.
7. Measuring tool.
8. Paintwork materials for polishing.

Be careful with fasteners. Once iron or steel is exposed to moisture, it means that it is necessary to protect them with paint. It is also recommended to use quick-drying adhesives in those joints where there will be play. But in no case do we apply adhesive to the threads, because it will be problematic to disassemble the structure later.

How to use and care

In order not to complicate the work, you can do this:

Then the frame can be made monolithic, and the bright fabrics of the seat can be easily washed in a typewriter. Another plus: you can make several pockets for different weights and heights. There will be a universal design that even a schoolboy can set up.

Decor

There is more than enough room for imagination. Here's what happens without haste, savings and hack:

And if you take four more bars and movable fasteners (clamps, bolts, etc.), then the sun visor will come out. What is always in place in good weather:

Replacing the fabric with boards, we get the simplest bench-chaise lounge in terms of labor costs. The idea is not new, but available:

When there is no time for cutting and sewing, you can again make a lattice base, and buy a bedding from IKEA for this space:

The collapsible design, although it does not look so expensive, has a significant advantage - this is mobility. And you can fully relax if you add portable steps to the same frame. And for this it is not necessary to invent something:

Chaise lounges are prefabricated or stationary - this is simplest form country furniture. There has never been anything complicated in their design. But in working on furniture for relaxation, as in any business, you need to adhere to an independent or subtracted plan.

How to make a deck chair for the garden with your own hands, see the instructions in the following video: