Do-it-yourself plywood cabinet. Do-it-yourself plywood cabinet. How and where to order material

Many, in order to save the budget, wondered how to make a plywood cabinet with their own hands?It is worth noting that the process of its manufacture is quite simple, not only a professional master, but also a beginner can make a cabinet of any size. However, before you start making a plywood cabinet with your own hands, you should know some features of the base material (glued veneer) that must be taken into account when working.

Plywood features

In order for a do-it-yourself plywood sliding wardrobe to serve for a long time, some features should be taken into account in its manufacture:

The cutting method depends on the thickness of the glued veneer sheet. A sheet 2 mm thick is cut with a knife. If the thickness is 2-6mm use electric jigsaw if more than 6 mm, then use a circular saw.
Make shallow cuts parallel to the cutting line. This is necessary so that the plywood does not crack when cutting transverse to the fiber.
If the glued veneer is stratified, its layers are glued together.
In order to connect the sheets with screws and nails, you must first make holes for them (fasteners). Otherwise, the material will crack.
Before gluing, the surface must be treated (cleaned and sanded).
If the plywood sheet needs to be bent, then for this it must be moistened in water and left bent for twelve hours.

Preliminary work or where to start

Preliminary work:

The choice of material. If you are going to operate the plywood structure on the street or in a room with high humidity, then in this case, moisture-resistant plywood is chosen. Appearance the future product largely depends on the variety.
Do-it-yourself plywood cabinet drawings. You can create a project according to individual sizes or you can choose from the available options. You should also decide on the number of drawers and shelves. When designing, you should also think about the connection of the frame (tenon / tongue and groove).
Decide on fasteners. It can be screws, nails, minifixes or glue. You should also think about fittings: hinges, handles, and so on.

What you need to work

In order to make a plywood cabinet yourself you will need:

jigsaw, knife and saw;
electric drill with a set of drills;
hammer, file, pliers, screwdriver;
wrench for furniture bolts and a screwdriver;
square, tape measure, compasses (all this will be needed to create drawings);
planer, chisel and chisel.

Working with ends and cutting material - important points

Particular attention should be paid not only to design, but also to cutting plywood. When cutting, make sure that the cuts are even. Otherwise, you will have to spend money on a film for pasting, and this is useless.

The ends are glued with PVC edges. It can be applied manually or using a special machine.

How to make drawings

Sketching plays important role when creating any design, including a cabinet.

Process:

First you need to decide on the size of the structure. To do this, using a tape measure, determine the height, width and depth of the niche.
The resulting dimensions are transferred to a sheet of paper. It should be a parallelepiped.
Then you should decide on the size of the shelves.
As for the depth, the best option would be 0.6 m. If the shelf width exceeds 0.6 m, then in this case they will need to be further strengthened.
The next step is to decide on the section size. The best option 0.8-0.9 m. As for the number of doors and sections, they should also be carefully selected. Otherwise, it may turn out that the middle shelves will not be available to the full width.

The process of making a plywood cabinet with your own hands

The process includes the following steps:

After the drawings are drawn up, two sides of the product are cut out, which will be the basis of the entire structure. To do this, use a saw.
Then, in accordance with the drawings, the shelves are cut out. Their height depends on what will lie on them (clothes, books or something else).

Important! If the sheet thickness is less than 16 mm, then in this case the shelves will need to be attached using metal corners. If the thickness is more than 16 mm, then grooves can be dispensed with. The size of the groove depends on the thickness of the plywood.

The groove is made for the entire width of the structure.

Collect the crate. First, attach the lower and upper bases to the sidewalls. If you are going to disassemble the cabinet in the future, then furniture bolts should be used as fasteners. If you are not going to transport the product, then you can connect the elements using finishing nails.
Then attach the back wall (DVP). It should be fastened in the same way as the bases were connected to the sidewalls.
All holes for fasteners should be made in advance with a drill.
After assembly, the product can be painted in any color you like. You can also use any overlays as decoration. Decorative caps are put on the bolt heads.
Most often, the structure is varnished. However, you can also use paint that will emphasize the structure of the wood. Before painting, the product is stained and sanded. This is necessary in order to get rid of dust. Then the surface is treated with drying oil and polished again. And only then you can apply paint / varnish.

Additional elements or how to improve the cabinet

For added convenience you can install sliding doors on the legs-wheels. In order to do this, you should attach the doors below and above metallic profile on which the wheels will move.

Important! Sliding doors are convenient only if the cabinet is wide and large.

Is it worth it to make a plywood wardrobe yourself?

Despite the fact that the manufacturing process of such a design is complex and time-consuming, as a result, one can get a closet that fits perfectly into the dimensions of the room.

If you are going to save on buying a cabinet and have free time, then in this case, building such a structure yourself will be a profitable solution. However, if there are no furniture assembly skills, then the work should be entrusted to professionals.

When you move to new house or things just accumulate that have nowhere to put, there is a need to buy a new wardrobe. However, this is not cheap. Therefore, there is another option. For example, try to make furniture yourself. For these purposes, you can use various materials: glass, wicker, natural wood, plastic, metal, fiberboard and plywood. The latter material is very plastic, easy to use and safe for health. For the home, it is advisable to try to make a plywood cabinet with your own hands.

Features of choice

The material itself consists of flat sheets of different thicknesses. It can be made of veneer (aspen, birch). Plywood is valued by craftsmen because the technology of working with it is very simple. Here are some more arguments in favor of choosing this material:

Plywood won't dry out wooden planks and bars. This is because, according to the technology of its manufacture, it underwent heat treatment and drying. This will help keep your closet looking presentable for a long time.
It is very durable, the thickness of plywood sheets can be taken in the range of 3-30 mm.
Making something out of plywood with your own hands is very convenient. Its finish surface is smooth, so it does not need additional processing. Just paint it at the end.
The environmental friendliness of the material is also very important.

Back to index

Job

Before starting work, you should study some of the features of plywood in order to know in advance how to process it correctly. This will help the finished product last for many years.

You need to know the thickness of the plywood sheet in order to cut it correctly. You will be able to cut thin plywood(up to 2 mm) using a sharp knife. For a thickness of 2 to 6 mm, an electric jigsaw is used, but if the thickness is more than 6 mm, only a circular saw will do.
With a knife, be sure to make incisions or grooves that will be weakening. They must be made parallel to the cutting line, otherwise the plywood will crack when cut across the grain. This is very important when working with multilayer material.
Do not connect plywood sheets with screws or nails directly. Definitely need holes drilled for them. The puff material will crack. When you take plywood, which is based on soft tree species, you will also need washers, which should be placed under the head of a nail or screw.
If according to your design solution you need to bend the material, then it is worth moistening it with water in advance and leaving it on the desired blank for about 12-14 hours. After that, you can develop any unusual shapes for your future closet.
Any surface is recommended to be cleaned and sanded before gluing. Then you can apply glue. Try to do it evenly, squeeze the adhesive parts as much as possible and lay the load until it dries completely. At the same time, make sure that the fibers of the fragments are parallel to each other at the place of gluing. Think about whether you need to protect the finished product from exposure to water, then you will need to use waterproof glue.
If it happens that the plywood has begun to delaminate, glue the layers back together. For the layer, you can take plain paper. This sometimes happens because of the low quality of the goods. You just don't need to subject the glued part to serious stress. Use it when you assemble the top cover or back wall.

Back to index

Carrying out stages

Carefully approach the choice of material. It has many varieties that differ from each other in their properties. Basically it all depends on the glue that is used in the manufacture. If the room is with high humidity or the product is intended to be used outdoors, then take plywood with increased moisture resistance. Among laminated plywood, you can choose almost any color. Pay attention to the grade, as you have to work with this material.

Choose the location where you plan to put the cabinet. So you can decide on its size. You can choose suitable drawings and sketches or make your own. Record all measurements. Decide how many drawers there will be and how they will look, what length and number of shelves, what doors will be in the headset, etc. Write down these and more important points relating to the appearance and design of the future cabinet.

Design on initial stage includes a decision on how the frame will be connected (there is a tongue and groove connection). You will also need to choose fasteners (what you will use): screws, glue, confirmation, nails or minifixes. Take care of the cabinet fittings, select hinges, door closers, handles, flanging, etc.

Back to index

Tools and materials

When you have everything you need, you can make an estimate of materials and prepare tools:

First of all, you will need good saw. It must be submersible, containing a special guide to cut sheet materials. Therefore, if you do not have such a tool and nowhere to get it, it is better to turn to specialists for cutting large plywood sheets. Prepare and hand saw or cutter.
Electric jigsaw.
Hacksaw.
An electric drill with a set of different drills (you will need special and ordinary ones) for furniture screeds, as well as countersinks.
Hexagon key for furniture bolts.
Everything for accurate and correct measurements (folding rule, square, thickness gauge, ruler, compasses, tape measure).
A mallet, chisels, chisels, planes - everything to plan and gouge.
Pneumatic hammer will be needed when driving finishing nails.
Other tools that you may also need (knives, files, hammer, screwdrivers, needle files, pliers, screwdriver, marker or chalk for marking).

If you use ready-made plywood blanks (cabinet doors, wall), then a plunge-cut saw will not be needed. With markup, you can also ask for help already experienced craftsmen. And when you get the hang of it, you can do everything yourself. For convenience, it is better to number all the details. This will help with assembly.

Back to index

Cabinet making

If you decide not to resort to someone else's help, start working on the drawing. Using a saw, cut out the frame of the cabinet from plywood sheets - its two side walls. Then you can cut out the shelves. Decide what you will put on them (books, clothes or other items). This will determine their height.

The shelves should rest on the grooves. Therefore, they must first be marked, and then done. To avoid damaging the outer surface of the cabinet, do not drill extra holes so it stays nice and smooth. However, if the plywood sheet is thinner than 16 mm, then you will need to mount the shelves using metal corners, and not grooves.

The size of the groove itself corresponds to the thickness of the selected plywood. It should be done for the entire width of the cabinet. Mark together two sidewalls attached to each other. Then the marking of the grooves will turn out to be the most competent and accurate.

If there is no possibility of milling, you can make 2 cuts with a depth of 4-5 mm, and already cut out the remains using a chisel or chisel.

Assemble the finished frame. First fasten the top and bottom bases to the sidewalls. If it is necessary that the cabinet can be subsequently disassembled (for transportation, for example), then furniture bolts should be used for fastening. If you have already moved and are not going to change the furniture, then you can attach it to the finishing nails.

Now you need to prepare the back wall of the cabinet. This will require DVP. After you cut it out according to the drawings, fasten it in the same way that you chose for the entire product. Remember the rules for working with plywood. Use a drill to prepare holes of the desired diameter for furniture bolts and screws.

You can use any decor for the final stage. Construction stores offer a huge range of different decorative overlays. At the end of the work, plywood must be painted in the selected color. Decorative caps should be put on the heads of furniture bolts to make the cabinet look prettier.

You can choose a paint that will emphasize the wood structure. You can also use varnish on the product. But before varnishing, you need to process the product with a stain and sand it. sandpaper to remove all dust. The surface before painting will also need to be primed (you can use drying oil or any other composition). Apply it with a brush to the plywood, and rub the filler with a swab. The primed surface is sanded again. Now you can apply paint.

Plywood is a universal material, the range of its application is wide and varied. But the purpose of our essay is not to describe the priorities of plywood over others. building materials, but to voice useful advice when used for the manufacture home furniture.

Running a little ahead, I would like to say that there is no such piece of furniture where plywood cannot be used, from stools to a serious furniture set or wardrobe. .

Therefore, we will not exchange for trifles, but we will deal with large-sized furniture. Do-it-yourself plywood sliding wardrobe assembled, will it suit you? Then, please, our instruction.

General rules

That's why they exist general rules so that when working with the material:

First, do not engage in additional fitting;
Second, reduce the amount of waste;
Third, do not be disappointed in handmade furniture, and not only her.

But seriously, here they are, these golden rules for working with plywood:

Thin material up to 2 mm is cut with a knife, from 2 to 6 mm - only with a jigsaw, over 6 mm - with a circular saw. All other options and substitutions are unacceptable;
On multilayer plywood, work is fraught with certain difficulties. The fact is that a cut across the veneer fibers can cause cracks in the main sheet, to prevent this phenomenon, it is recommended to make parallel weakening grooves or cuts with a knife;
Plywood is a layered material that does not like rough mechanical impact. If you decide to drive a nail or self-tapping screw directly into the puff, then you risk getting diverging cracks from the place of driving or twisting. For normal work with the material, the place of preliminary fastening of the part with a self-tapping screw or a nail is drilled with a drill of the required diameter;

Advice! When working with plywood sheets be sure to correct the material. The soft woods used in the manufacture of products are easily deformed when the screw is screwed all the way, therefore, in order to preserve the aesthetic appearance of such a connection, we recommend using gaskets in the form of washers.

In the manufacture of furniture, especially in the development of unusual, individual forms and the rejection of the classic box, it often becomes necessary to bend the material. A striking example is the soft, "inflated" forms at the transitions from the end to the front. In this case, you can easily bend the plywood by first moistening it with water and leaving it on the required blank for 12-14 hours;
A few words about gluing. As in any recommendation for gluing two products, the surfaces must be sanded and cleaned before this action. Glue is applied to required quantity on the parts and after compression, the parts are left under the load for the entire drying period. It's simple, but here's a little nuance.

In the course of work, when buying obviously low-grade goods, plywood delamination is possible. In principle, there is no particular trouble in this, so a little disappointment. Layers can be glued together using ordinary thin paper as an interlayer. It is clear that this product is not suitable for serious loads, but, for example, for assembly rear wall or top cover can be applied.

About the material and preparatory work

Although plywood is also plywood in Africa, not every type of plywood is suitable for furniture production, and note that there is no question of varieties, if you want a first-class thing, do not be greedy.

We are talking about the fact that in this case we need not just plywood. And laminated plywood, by the way, is a very worthy competitor (as a material) to laminated chipboard. We do not aim to compare these two materials. I just want to note that lamination did not affect the financial component of the issue, the price remained practically unchanged, but the service life of the material and products made from them increased.

Interesting to know! The process of using plastic has minimized the content of formaldehyde in resins and the resins themselves in products. Therefore, this type of material belongs to non-hazardous materials, and some even try to name laminated plywood environmentally friendly material. But we will not lie. There are formaldehyde resins there, a little, but there is.

The preparation process includes design, purchase of material and cutting. For those who are designing furniture for the first time, the easiest and most correct way out is to take the drawings of the finished product and not load the whole complex with complex mechanical solutions in the form of sliding shelves, secret niches and similar tricks.

If you are not confident in your abilities as a furniture designer, then it is easier to entrust this work to a specialist technologist. The project itself, taking into account your desires, will not be too costly.

Purchase and delivery to the place of work is not a problem. But the cut - the process is much more interesting. Without exchanging for individual recommendations, we issue them in bulk. In the process of marking fragments on a sheet, in addition to minimizing (within reason, of course) the distance between the parts, but also number the parts.

This can be done with any marker that can be easily removed without leaving streaks. Numbering is useful to you when assembling the finished product.

Cutting material and working with ends

We have repeatedly written that this is, perhaps, if not the most important, then one of the most crucial stages. The fact is that the clarity of the assembly depends on the evenness of the edges, and, importantly, the appearance of the product.

You don’t need additional expenses for pasting film, plywood is already laminated, why throw away extra money. Therefore, we once again offer you and strongly advise you to cut the material in workshops on industrial equipment and without initiative.

The ends are glued with a PVC edge, which can be glued on your own, or you can use the services of the same workshop where the material was cut. If they have edge banding machine, then it will not be difficult to tighten the ends, although we repeat, you can quite do it yourself.

Into the piggy bank! In cabinets, there are ends that are touched more often than others. These are the outer side and lower and upper ends of the cabinet. On cabinets with mezzanines, similar end surfaces of mezzanines can fall into this category. For them, it is recommended to take a two-millimeter shockproof PVC edge, for everyone else, a half-millimeter edge is enough.

Sliding systems and hull work

A plywood wardrobe with hinged doors is already an anachronism, not relevant, like the "Song of the Hares" in the immortal Russian comedy. Sliding systems on skids with a bottom slip system, this is what will do.

At the same time, doors, or as they are called door panels in this situation, may not necessarily be plywood, but even plywood, it is not necessary for a common color, although it can be for a common one.

The only recommendation in this situation is that when installing this system, it is necessary to make adjustments for door leaf. Therefore, the cutting of the material must be carried out, already knowing these errors.

Before assembling, once again make sure that all the fragments and details correspond to your idea and your project. And then it is necessary to mark the places of connection of parts and installation of fasteners.

We think that it is not necessary to remind you that the markup is carried out on inside product to be covered. Well, they reminded, so they reminded.

To prepare and drill holes, you can use either a confirmation cutter or two drills for 8 and 4.6 mm. For complete confidence in the clean work of drills or cutters, make several pen trials on the scraps.

Quite often, a drill or cutter has to be sharpened, and sometimes the angle of sharpening has to be changed. A few drills are also useful for fixing metal skids. The head of the self-tapping screw must completely go into the prepared cell and not interfere with the movement of the valves;

Interesting pitfalls can lie in wait for a beginner when working with retractable facades. The fact is that many masters (in the old fashioned way) install side shelves and facades in the first compartment.

In this case, the level of marking of one side part and the insert will clearly differ from each other in distance from the edges. This moment is often forgotten, then you have to disassemble and redo everything.

Plywood features

Plywood is strong enough and pliable in work. It is safe and environmentally friendly. The plywood shield consists of several pressed layers of different thicknesses.

The material has a number of advantages:

Plywood is durable.	It does not dry out and does not deform over time, as it undergoes special heat treatment and drying during the production process. Furniture made of sheet will retain a presentable appearance and strength for a long time. The only caveat is high humidity. Therefore, in the kitchen or in the bathroom, wall cabinets and floor cabinets are made of wood or other moisture-resistant material.
The strength of plywood is high.	The thickness of one sheet can be in the range from 3 to 30 mm. For each type of furniture, the desired parameter is selected, taking into account the expected load.
With plywood, there will be less hassle in finishing.	The sheet has a smooth and beautiful surface. There is a wide variety on sale colors material, so you can choose a shade for any interior.

Working with the material does not require specific knowledge. When working, it is only necessary to take into account that plywood is a multilayer material. It is important to work carefully here.

Knowing these nuances, making a plywood cabinet with your own hands will become an exciting and entertaining business, and the finished product will serve in everyday life for many years.

What you need to work

Before starting work, it is necessary to prepare tools and materials:

Depending on the thickness of the sheet, a cutting tool is selected. If the furniture plywood is thin, it can be cut with a carpenter's knife. To work with denser shields, you will need an electric jigsaw or circular saw.
Electric drill. Drills of different diameters.
Hex key.
To perform measurements - tape measure, ruler, square, thickness gauge, compasses.
Planer, mallet and chisel.
Screwdriver.
Hammer, file and pliers.
Nails, bolts and nuts.

Don't forget about markers or crayons. They come in handy when doing markup.

Many novice craftsmen self-manufacturing plywood cabinet turn to plywood cutting professionals for help. In this case, the measurements of the customer must be extremely accurate.

How to make drawings

Before drawing up a drawing, you need to decide on the size and type of cabinet. It can be a wardrobe with sliding doors, a simple swing wardrobe.

The drawings should show all the details that make up a simple folding or plywood wardrobe. All details are transferred to a sheet of paper in the form of a general design. Above each element indicate its measurements.

The parameters of all parts must be transferred to a sheet of plywood and cut. From these parts, in the future, the assembly of the general structure will be carried out.

If we take a simple single cabinet as a basis, then its drawing consists of the following parts:

back wall;
side panels;
bottom;
shelves;
door;
lid;
straps for fastenings;
edge pads;
door stand.

Depending on the model of the cabinet, the number and specifics of parts will be different. Not all elements are made from a shield of the same thickness.

Working with ends and cutting material important points

A crucial step in the work is sawing the multilayer material. Professional furniture makers prefer to do this with a laser. The appearance of the product largely depends on the processing of the edges.

Perform cutting on laser machine possible only in professional carpentry workshops. If this is not possible, the ends are processed independently.

Working with the ends consists in gluing the edges with a special PVC furniture tape. Edge sealing is quick and easy.

When working, it is important to take into account which parts in the structure will most often be subjected to mechanical stress. These ends are pasted over with a shock-proof edge, the thickness of which is 2 mm.

The process of making a plywood cabinet with your own hands

Getting to the assembly of individual parts in general design. In order not to get confused in the elements, the masters recommend numbering them immediately after cutting.

The diagram can show the connection sequence of each part. The plywood module is assembled within one day. For an experienced carpenter, this process takes much less time.

Before you make a plywood cabinet with your own hands, you should place in front of you a visual image of the model that was chosen as the basis. This will help not only technically, but also visually assess the build quality.

Connect the parts together in the following sequence:

First attach the side panels to the bottom and top cover. For this, furniture nails or special bolts are used.
Most often, not plywood is used for the back wall of the cabinet, but fiberboard. It is necessary to make holes in the panel and attach it with bolts to the frame. At the same time, do not forget about the location of the mounting strips in the lower and upper parts of the element.
Special holders for shelves are mounted to the side panels. Masters prefer to make a fixed shelf in cabinets that will carry a large weight load.
From the outside, a frame with crossbars is attached to the frame. Doors will be hung on this structural element.
At the bottom of the cabinet, a protective panel is installed and fastened with bolts.

The assembly process will depend entirely on the drawing and the parameters of the product itself. It is important to properly prepare for this stage and decompose all parts of the structure in the order of their connections. There should not be anything superfluous at hand, but only necessary tools that will be needed when assembling the cabinet.

What do you do with old furniture?

Poll Options are limited because JavaScript is disabled in your browser.

The closet plays an important role in any interior. It is not surprising that stringent requirements are imposed on it: not to take up too much space, to be roomy, to have a sufficient number of shelves and drawers. Models on the market do not always fully satisfy individual wishes.

It can be even more difficult for owners of non-standard layout apartments to choose an option that fits into the room. In this case, you can order a cabinet from specialists who will take into account all the wishes for the design and internal content.

Unfortunately, this option is not for everyone. Then best solution problems will be the use of one's own hands and ingenuity, because it is not difficult to assemble a wardrobe on your own!

Preparatory stage

Each room has its own type of construction, so you should familiarize yourself with the main ones.

Cabinet with a closed facade - a direct model with hinged doors. To open them, you need to provide extra space, do not forget about this if you are making a closet for the hallway.

The cabinet with an open facade has no doors, and its contents are in plain sight. It imposes certain requirements on the order.

The wardrobe doors are mounted on a rail mechanism and open, moving apart. There are designs with an upper and lower rail, which one to choose is a matter of taste.

Ideal design for a built-in wardrobe

The corner cabinet fills the corner. Suitable for a room of any size, if it is square or close to it.

Having chosen a suitable design, you can begin to create a project for the future cabinet. Since this piece of furniture has been serving for more than one year, it is worth considering what functionality may be required of it. It is better to build a drawing on whatman paper, entering all measurements there.

Decide on the location and dimensions of the cabinet. If a niche is provided in the room, it is ideal, but if it is not possible to build it in, choose a place where neither he nor he will interfere with anything.

think over internal filling: the location and number of shelves and drawers, their dimensions, additional elements like mezzanines or interior lighting.

Don't Forget Your Choice exterior finish, decorations. The colors "oak", "alder", "beech" are the most popular today. And you can choose wood with an interesting pattern and leave your native pattern. Get creative, decorate the doors with a carved pattern.

materials

The material can be natural wood, plywood, MDF or chipboard - all of which are used by furniture manufacturers.

The tree is environmentally friendly, does not require additional decorations, it is convenient to use. wooden cabinet will last more than one year and will look solid and impressive. The perfect choice for a classic style interior.

Plywood is glued sheets of veneer (birch or trees are used). conifers). This cheap, practical material is suitable for the manufacture of almost any furniture. It is best to choose laminated plywood (FOF brand).

Chipboard (chipboard) is the cheapest and most common option. Collecting own closet, usually use it. Short-lived.

A self-adhesive melamine film is also useful for processing the side faces.

The rod diameter must be at least 22 mm. The easiest way is to buy it in a specialized store. You can also buy pens there.

Tools

Ruler, tape measure, pencil and others for taking measurements and building a drawing.
Level.
Electric jigsaw or hacksaw for cutting.
Screwdriver or drill and screwdriver.
Glue.
Ratchet key.
Iron for gluing edging film.
Accessories. Each door opening mechanism has its own set.
Confirmations for cabinet from chipboard is better buy a length of 7 cm with a diameter of 0.5 cm.

Progress

First of all, measurements are taken and a drawing of the future cabinet is built. The final result depends on a correctly drawn up drawing, so approach it with all seriousness.

Making cabinet doors with your own hands is not difficult, the main thing is to correctly calculate the dimensions. If its vertical height is less than the height of the opening, the door will not completely close it, and if more, it will not fit. Finding the horizontal dimension, we must not forget about the fastening elements: they will add a few millimeters to it. The width of the doors should be ~3 mm less than the opening.

Now you need to mark the placement of the mounting bolts on the sawn parts and drill all the holes.

The assembly begins with the installation of the bottom and attaching the walls to it. Make sure that assembled cabinet fits into the allotted space and other furniture will not interfere with the opening of the doors. If you are making a wardrobe, guides are installed at this stage.

The location of drawers and shelves is outlined, shelf holders and guides are installed. They must be strictly parallel so that they do not skew.

It is time to install the upper shelves and roof. A gap of ~ 7 cm is left between the ceiling and the roof for the installation of confirmations. Fasteners are made by hand, finally tightened with a ratchet.

The side shelves are attached to 4 confirmations (two on each side), in some cases dowels (small wooden cylinders) are used. One end of the dowel is inserted into the wall of the cabinet, a shelf is put on the other.

The last step is to install the doors. Before installation, attach the handles with an outward bend. For sliding doors is especially important correct installation mechanism. Don't rush, be careful.

It's time for the finishing touches. Process slices decorative film, decorate the facade. Put mirrors, interior lighting and other elements.

Tricks and nuances

lean on existing schemes cabinets, designing your own.

A corner cabinet requires more care in design and assembly than a straight one, so it may be too complicated for an inexperienced person.

If you do not have enough experience, it is better to entrust the cutting of parts to the master. His hand will not tremble, and the cuts will be even and neat.

In order not to get a piece smaller than necessary, consider the thickness of the saw. The wall thickness must be at least 18 mm. Otherwise, the strength of the structure will be insufficient.

When working on the drawing, pay attention to the curvature of the floor. If the floor is not level, gaps may appear between the doors. To avoid this, for swing mechanism adjust the mounting canopies, and for a sliding one - change the height of the wheels.

Guides for sliding doors should be parallel. Be very careful when marking and installing guides for drawers and shelves.

Drill holes for confirmations symmetrically. Use a drill of the correct size. The exact number of confirmations depends on the number of parts. Confirmates are covered with plugs to match the color of the structure.

Installation of the mirror begins with the installation of a seal around the perimeter. Film to cut chipboard glued with an iron. Smooth it with a cloth, pressing it as tightly as possible. The edges can be trimmed with a regular knife.