Disassembly and installation of knob handles. Installing a handle on an interior door Installing handles on a door yourself

This article will describe the work performed to install latch handles on interior doors, which are the most popular in use today.

The latch handle has the following design.

The visible part of the handle may be perfect different types and it might look like this:

Or this way:

All such latch handles mainly consist of two parts, the handle:

and latch:

Each of these parts of the latch handle requires a separate insertion into the blade.

There are different types of such latch handles on sale, with a latch that have an additional mechanism installed in the handle itself, which allows you to lock the door from the inside, and from the outside on the handle there is a key holder that allows you to lock the door. There are also such handles and they cannot be locked without a lock. Latch handles from different manufacturers have different design features, which in no way can affect the process of inserting into the blade. Such handles have a latch on the inside, so the entire process of installing the latch handle is the same for everyone.

Therefore, if there are any differences, you shouldn’t have much doubt because of this and you should pluck up courage and start doing the work. And you should start with preparing the tools.

To do this, we will need tools to work.

Screwdriver or hand drill.
A crown with a diameter of 50 mm for wood.
Made with size 23-24mm on wood.
Pencil
Chisel
Hammer

In order to make the process of installing the latch handle into the door leaf as easy and quick as possible, you can purchase a special kit in specialized stores.

We begin to install the latch handle

1. In order to begin installation, you must first make markings on the canvas for drilling. If you purchased a special kit for inserting such a latch handle, then this kit already contains a marking diagram.

If you do not have such a diagram, then the markings can be done manually. To do this, we make a mark at a distance of approximately 1 meter from the bottom of the door leaf, then along this mark we measure 60 mm from the edge of the door leaf and make a mark for drilling, as shown in the photo.

2. On the side door leaf We also find the center and make a mark for drilling.

3. Next, take a chisel and for the front plate of the latch on the door leaf, hollow out a recess equal to 3 mm. It is better to drill out the center of the thickness of the door leaf with a slightly thin drill, so that later you do not have to make the marking again.

4. We use a crown with a diameter of 50 mm through hole. It is better to make a through hole on the door leaf on both sides so as not to damage the door leaf.

5. As a result of the manipulations performed, we will get a hole.

7. As a result, we get several holes on the door leaf.

8. Insert the latch into the hole on the side of the door leaf and screw it.

Using a special key that should be included in the kit or any thin and flat object.

Press the tongue in the hole.

and remove the handle.

10. After the handle, remove the decorative cap and expose the mounting holes.

12. Insert the other half, and then tighten both halves of the handle with the screws that come with the kit.

14. Cover the door leaf and mark the place where the tongue touches the jamb, in this place we hollow out a recess for the latch tongue.

15. A plastic pocket must be installed in the hollowed-out recess.

16. Place a metal plate on top of the plastic pocket and screw it on.

As a result of the work carried out, the door handle-latch was installed, and the door is now ready for use.

At what height should I install the handle for an interior door?

The handle is an important part of the “pie” of an interior door, because the comfort and ease of use of the entire structure will directly depend on the correct installation and selection of it, and the “Dverka” interior door hypermarket will help with this. Most manufacturers offer doors for installation with existing handles and other included fittings.

The height of the handle in this case is standard and, in accordance with GOST, is 100 cm from the floor.

If the handle is not installed, models may or may not have slots for attaching it. In the second case, in the area of intended fixation there is a special beam that allows you to install the handles and lock quickly and easily.

Here the height is determined independently, but the “limit” of indentation up and down should not exceed 10 cm.

The height of 100 cm is aimed at a person with a height of 170 cm. But given that this parameter may vary significantly best option– purchase a door without fittings and marked grooves and fix the handle in the place that best suits everyone living in the house.

Peculiarities

To finally determine the appropriate height, you can adhere to the following rules:

By the wrist. You need to come close to the door, lower your arms along the body. Make a mark at wrist level and step back 20 cm.
The resulting height will optimally suit the person taking the measurements.
On the elbow. Everything is simpler here: when approaching the door closely, the notch should be made at elbow level.

If you use both methods at the same time, the result should be approximately the same.

There is no need to make similar measurements for each door. It is enough to place a mark on one, measure the resulting distance and measure it on other interior doors in the house.

Pen in a child's room

The height obtained as a result of the above measurements for adults will not be suitable for children - the child will not reach the handle.

On the other hand, an additional groove will negatively affect the aesthetic appearance of the structure. The best option is to use the push mechanism of the handle and attach a cord to it.

The child pulls the cord and the door opens without difficulty. When children reach a suitable height, the lace is untied.

It is worth considering that the correctly selected height of the handle is not the only important point.

Installing a mortise door handle

The element itself must be of high quality and reliable, easy to press. Especially for children. It is worth checking this point during the purchase. Only in combination with the quality of the product correct fastening will ensure ease of use of the interior door.

Expert of the hypermarket of interior doors “Dverka” http://www.dverkadverka.ru Victoria Zakirova

How was the handle on the front door secured?

All the handles on the door, when working, have the property of stunning and breaking.

Their renovation is not that weird and it will also apply to those taking it for the first time.

There are two ways to fasten a door: a screw, through a recess, and screws - self-tapping screws. Therefore, repairs may not be expensive and it does not require a huge amount of effort to use.

Which tool should I stick with before I start repairing the handle?

First you need to buy a set of screwdrivers or screwdrivers and bits.

By the way, it will be much more convenient and faster to make fasteners.

You will also need a set of screws.

Fixing a broken handle attached to a fork

By connecting two equal parts of the handle on both sides of the door.

This applies to spherical or conical products.

For types provided by the carrier, the elements are installed separately. This means half is broken, then it is repaired and the other is in place.

The handle is then removed as the door opens, keeping one hand halfway and the other in the opening.

All design details must be entered manually.

The handle half is then detached to reveal the fork set to the desired length.

How to Install a Latch Door Handle

In the same way, the entire structure turns back, here it is purely without a special tool.

Technical repair mechanism fixed in the form of brackets

In this case, you will need to buy a screwdriver or a screwdriver. It should be noted that transverse bolts are better and stronger than straight bolts.

The door handle is moved to cover the old grooves. Then, on the opposite side, two pairs of bolts are attached to the new holes.

Press firmly so you don't have to slide.

The tops are also installed using screws - screws with drilling into the new gutters. The overlay can be attached as a square or diamond. At the end of the work, the application is pinned.

Characteristics of replacement of small parts parts

When replacing a spring piece, the new piece is compressed tightly at the top, the veneer cap is installed, and the veneer ring is attached and connected to a screwdriver.

Then the rotating mechanism is delicately screwed in, followed by the introduction of a spring element into it.

The button is turned by a key.

In cases where the cake repair is not successful, it is much easier and cheaper to buy a new product.

Home »Inside» How to open door lock keyless

How to open an interior door lock without a key

Sometimes it happens that the inner door is closed and the key is missing.

You don't want to break the gate leaf, because it's quite expensive, and calling a repairman will additional element costs. So, how to quickly and safely open a door without a key to the design itself?

For what reason can doors extinguish?

Interior door lock

Before you start opening the neck structure right away, you must state the reason why it was destroyed.

Typically, this situation may arise for the following reasons:

The lock in the handle is simply stuck or it has turned off.
The latch is locked.
The jammed tab located in the locking mechanism is stuck.
On the other hand, there was a key in the cavity, which prevents the lock from being opened.

If you want to pinpoint the cause, you need to use a wide screwdriver.

With help in different places the door leaf rises. You have to pull it out a little and then it becomes clear where it is. Once you find an error, you can fix it.

Defective latch - what to do?

Typically, bolt failure causes an unauthorized door lock.

This item may not move completely. Even when you press the handle all the time, the tongue keeps running out. If the door is too attached to the frame or slammed shut, they can no longer open.

If so, you can do the following:

Using a simple screwdriver or other hard object, gently squeeze the design fabric from the box and gently lift it up as you do so.
In addition, to eliminate the possibility of such situations occurring in the future, it is a good idea if you want to spin the lever and see what is wrong with the tongue.
If necessary and option, it is better to replace the wrong product with a new one.

The language was not successful

There is also a situation in which door design a door that is locked will not open after repeated use.

Even if the round handle is not equipped with an additional latch, if the lock cannot be opened in the usual way, then the problem is most likely due to the tongue.

To solve this problem, you can use a sharp tool that easily fits into the gap between the frame and the door.

Then, to open the interior door lock without a key, you must follow the steps shown in:

Carefully place the ruler into the slot, plastic card, office material or a regular knife.
Orientation to the part of the door on which the door handle is installed.
The tool used to open the tool should be slightly tilted and pressed.
How to install a handle on an interior door: Photo.

It needs to be pushed so that it can come into contact with the cut part of the tongue.
Angle a knife or other improvised device against the door leaf while the tongue is completely hidden in the lock. During the implementation of such measures, the handle should be in a lower position than in the figure, and the wing should be extended in the direction in which it normally opens.

If you follow all the rules above, your keyless door will open effortlessly.

Locks on the internal door: their main functions

Before opening a door handle without a key, it will not be superfluous if you know what functions such mechanisms have.

Only with all the necessary knowledge and skills will it be much easier to solve this problem:

Modern manufacturers could not ignore unauthorized stagnation at the doors. That's why they created a special door lock that has a lock on one side and a special opening page (button) on the back.
If there is a moment when the door urgently needs to be opened without using a key, it is enough to insert a hard, rigid object (for example, an anchor) into the hole to open the mechanism.
If there are doors with glass frames, then in the case of a ridge, you can carefully remove them and enter the room.

The situation could be big.

But if you cannot deal with the blocked lock on your own, it is better to call a professional technician who will solve the problem in a matter of minutes.

Add a comment

Installing a handle on an interior door with your own hands - instructions on how to install the handle

Interior doors and fittings for them, including handles, are sold separately.

Accordingly, there are no holes for installing handles in the interior door. This happens for the reason that the handles, although standardized, are still different in design and installation dimensions. Here you can do two things: either call a carpenter, or install handles in interior door with your own hands.

So, we install the knob handle in the interior door. This is the most common type of handle, in my opinion, the most suitable and convenient for interior doors.

Before you begin installing handles, it is advisable to remove the door from its hinges.

If there is no one to help you, then you don’t have to take it off. But you should prepare a chair or stool so that you can fix the door, i.e.

she became immobile.

To install the handles you will need a drill, a point drill, a ruler (preferably a square), a hammer, a chisel and a crown for large holes (see.

photo she is red).

Fig.1. To install handles on an interior door, you will need the simplest tool that is found in every home: a drill or screwdriver, a chisel, a feather drill with a diameter of 23 mm or a Forstner drill, a wood crown with a diameter of 54 mm.

First of all, we decide on the installation location, or more correctly, the installation height of the handles.

There are no strict restrictions on this matter. Typically, the installation height of the handle from the floor ranges from 1 to 1.2 meters. This height is sufficient for both adults and children.

For different pens they are different. In addition, they depend on the thickness of the interior door.

Also in the instructions, as a rule, there is a template for installing handles, where all the geometric parameters are indicated. We will be mainly interested in the dimensions of the holes for the pawl, the handle itself and their relative positions. The diameter of the core drill and the crown depends on these dimensions.

Therefore, you need to buy the necessary tools after purchasing the handles.

It is important to note that the drill and bit must be purchased with a diameter equal to the diameter of the hole in the instructions for installing the handles. If you use a larger tool, there is a high chance that the decorative trim will not cover the hole. If it’s smaller, the handle simply won’t fit. At the same time, redo the holes for larger size, very labor-intensive and problematic.

It’s much easier and faster to do everything correctly right away.

Now you can directly begin installing the handle on the interior door. To do this, holes are marked for the handle itself and the pawl. For these purposes, it is convenient to use a ruler as in the photo.

Fig.2. Relative to the end of the door, the handle can be shifted by a distance of 60 - 70 mm.

At this distance, mark the place for the hole for installing the handle.

Fig.3. First, drill a hole for the handle.

To avoid burrs and chips on the door, proceed as follows. First, drill a hole with a drill with a diameter of 5-6 mm. Then, using a crown, an incision is made on one side of the door with a depth of at least 5-10 mm. Then a hole is drilled with a crown on the other side of the door.

Fig.4. At the end of the door, at the height where the center of the hole for the handle is, mark the center of the hole for the latch, and use a feather drill to make a hole.

The latch has a pad 2-3 mm thick. To ensure that the door closes well, a groove is cut out under the platform with a chisel. It is convenient to first drill a hole, then insert a latch and mark the groove along it, then use a chisel to cut it out.

After the holes are ready, insert the dog and trace it with a pencil.

And using a chisel we make a groove. This groove is necessary so that the dog's platform is flush with the door and does not interfere with opening and closing.

Fig.5. The installation of the handle begins with the installation of the latch. It is inserted into the groove and secured with screws that come with the handle.

You should tighten the screws carefully and do not tear off the notch for the screwdriver. To simplify screwing, you can pre-drill holes for self-tapping screws with a drill with a diameter of 3-4 mm.

This groove can also be made using a router. But for this you need to first make a template, which is not advisable for a “one-time” installation of handles.

After the preparation is completed, install the handle on the door and tighten the screws.

Fig.6. Final stage- This is the installation of the handle mechanism.

One half of the handle is installed in the latch groove. The handle halves are connected with screws.

Installing a door handle-lock on an interior door

It is important not to overtighten the screws, otherwise the handle may jam.

As you can see from the description, installing handles on an interior door is very simple. It is important to take your time and make the correct markings. After that, special drills are used to make holes for installation, a groove for the latch is cut out, and the handle is installed in place.

On average, it takes about 20-30 minutes to install the handles.

Home cosmetics

Install the handle on the interior door yourself

It is difficult to imagine how to use an internal door without such a mandatory attribute as a handle.

At first glance, its installation may be difficult. However, if you take the task seriously, you can independently manage the availability necessary tools and materials and proper organization of work with this task. In the material presented, let's see how the handle is installed on internal door.

Types of handles

There are several types of cranks that are suitable for insertion into an interior door:

rotary;
with pressure mechanism;
without locking mechanism.

Stationary handles, which do not operate mechanically, allow the door to be opened by pulling.

As for pressure systems, these louvered blinds made in the form of a lever. In the process of pressing such a handle, the locking tongue moves inward, which allows you to open the door.

What is an oval handle door handle? Installing this system allows you to open the door without pressing the handle. Due to the circular shape of the handle, the operation is performed by turning the handle. The design can be equipped with a locking button, which allows you to lock the tongue of the locking tongue.

This way the door can be locked from the inside.

Tools and materials

What does it take to install handles on an interior door? Self-assembly may require the following tools:

Measuring measuring tape;
pencil;
Manual or electric drill with a pen-shaped attachment;
screwdriver;
chisel for wood processing;
hammer.

Inner door handle height

Before inserting the lock into the interior door, you must determine the optimal location for installing the handle.

To do this, it is enough to simulate the opening of the door to think about what height is most suitable for each individual user. As practice shows, the right decision is to place the handle on the internal door at a distance of at least 1 meter from the floor plane. The images presented are optimal for both adults and children.

Cutting holes for handle

Once you have found the necessary tools and determined the location of the building, you can proceed directly to creating the hole for installing the mechanism.

First, mark the height of the future handle on the plane of the door and its end. This is necessary to determine the exact location where the hole will be punched using a drill for a double-sided structure.

In order not to interfere with the calculations, it is enough to take the locking mechanism, and then, using a tape measure, we measure the distance from its eye to the visible edge.

The parameter must be marked at a pre-selected height on the door leaf. Once the appropriate markings appear, you can continue selecting the appropriate drill material.

At the end of the holes you need a diameter on the plane and at the end of the gate leaf, here you need to attach the opposite parts of the handle structure.

If the thickness of the plane does not allow installation, excess wood should be removed using a chisel. Then you need to scrape the fabric from both sides until the handle engages.

Bolt assembly

Once the previous work is completed, the latch should be installed in the prepared hole. Installation of handles door handle on an interior door assumes that it is attached to the door leaf in the open hole using fasteners that are attached to the product set.

It is appropriate to work with a screwdriver.

How to install a handle on an interior door

However, in the absence of the latter, you can use a regular screwdriver.

After strengthening the key part of the structure, it includes a core for a long time, which is reinforced with a screw. To avoid problems with the basic assembly, the key must be inserted in advance, moving the mechanism locking mechanism to the closed position. Only then should the screw be tightened.

Installing a door handle on an interior door

Direct insertion of the handle into a pre-assembled structure is the most simple step work.

It is enough to insert the square rod into the corresponding hole in the locking mechanism.

The next step is to secure the handle with a buckle on one side of the door. To do this, you can use self-tapping screws or use zip ties. Once the first handle has been successfully assembled, similar operations must be performed with the other part of the structure, which must be installed on the back side of the door leaf.

This will establish a connection between the two elements of the system.

Installing the Keypad Insert in the Door Frame

To install the handle on an internal door, it is considered ideal, you need to make a corresponding hole to fit into the locking part of the lock in the door frame.

Do not use errors in calculations that allow you to use toothpaste on the tab along the vertical edge. When the door leaf is closed and the handle is released, the blocking element is connected to part of the frame.

The remaining toothpaste label will tell you where to make the hole under your tongue.

Using the method described above is the optimal solution for determining correct location panels. Experts also resort to this root cause.

The formed imprint from the protruding tongue of the neck should guide a stable outline with a pencil. Then use a drill and chisel to enter the hole in the plug, then use a metal plate with the hole.

In advance, you will also need to place holes for fasteners to secure the plate to the door door.

When you have created all the necessary holes, simply secure the slab in the appropriate section. To fit tightly on the door cover, the metal piece must be screwed tightly to the wood surface.

At the end

So we looked at how the handle was installed on the interior door.

This material provides an example of how to cut a simple mechanism into wooden plan. Now you have enough knowledge to solve your problem yourself, without resorting to external help.

Master of Architecture, graduated from Samara State University of Architecture and Civil Engineering. 11 years of experience in design and construction.

Can you imagine ordinary doors without a handle? It would seem like such a simple design, but in fact it is a very important attribute. Installing a door handle on an interior door is a task that consumers face when purchasing and installing a new door leaf. It is quite possible to solve the problem on your own. It is only important not to make a mistake with the choice of design.

Types of Door Handles

There are various types of handles that are different from each other in color, shape, material, mechanism and installation method. If we take the last feature as the basis for the classification, then there are two types of pens:

Invoices.
Mortise.

Installation of first-class products is simple and does not cause serious trouble. They are simply fixed to the surface of the canvas, unlike other types of products. Installation of mortise handles involves pre-drilling a hole in the door leaf.

Mortise devices are divided, in turn, into two more types:

When purchasing accessories, pay Special attention on what raw materials it is made from. Products can be made of metal, wood, glass or natural stone. They should be selected according to the color and model of the canvas, as well as the style of the interior.

For sliding systems Hidden handles can be installed

It is worth noting that the handles are of a hidden type. They are designed for sliding systems such as sliding doors. When the sashes move, the products do not interfere or damage wallpaper or walls.

Installation height

It is not clearly stated anywhere at what height to mount the handle. Behind the scenes it is installed in products made from MDF and timber at a distance of one meter from flooring. It can be lowered or raised a little - it all depends on the taste of the owner of the living space.

The installation height of the door handle is approximately 1 m

The installation height of the product is affected by the height of the residents. As practice shows, a handle at a distance of 1 m is the best option for adults and children. When installing, also take into account the level of the handles on other doors. Products must be at the same height.

Required Tools

To install the handle, arm yourself with tools, without which it will not be easy to do this:

a simple pencil;
square;
roulette;
chisel;
screwdriver;
drill;
drill;
crown.

The crown and screwdriver can be replaced with other available tools, but the quality of the work will suffer and it will take a lot of time.

Before starting installation, read the instructions for the product. It indicates all the dimensions, which will help you choose the right drill bit and crown according to the radius.

Step-by-step installation instructions

If you have not encountered a similar question before, do not be afraid. Even those who are not involved in construction can handle the installation of the handle. You just need to follow the detailed diagram step by step.

Marking the canvas

Installation of the handle begins with markings on the doors

Marking is where the whole process begins. Having calculated at what height the handle will be located, place marks on the door in the places where the holes will be made.

Take advantage with a simple pencil, tape measure and corner and draw on flat surface canvas line horizontally. Then transfer it to the end and opposite side of the sash.

Place a mark on the end of the product in the center of the drawn line. It points to the place intended for recess under the tongue. From the edge of the door at a distance of 0.6 cm, draw a point on both surfaces of the door. This place is intended for the handle.

Drilling holes for handle and lock

It doesn’t matter at all in what order you make the holes: first for the handle, and then for the lock, or vice versa. Just remember that things don’t like to be rushed.

For the handle, the opening is drilled with a drill and a crown. To make it smooth and neat, you need to drill from the inside and outside of the door to a depth equal to ½ the thickness of the leaf.

For greater accuracy, craftsmen advise marking this depth on the crown with a felt-tip pen. By adhering to this rule, you will definitely not damage the product. To ensure a straight hole, keep the drill straight and do not allow it to deviate to either side.

When drilling a hole for the handle, the drill must be held level

To install a latch into an interior door with your own hands, arm yourself with a drill and a pen. In this case, you need to be extremely careful, since the gap between feather drill and the end angle is small.

Lock installation

The mechanism must be inserted into the hole drilled under it. Press the overlay to the end of the product and outline it with a pencil on all sides.

Then use a chisel to clear the top layer of the canvas and make a depression the size of the thickness of the overlay. This is done in order to press it into the doors.

The cover is fixed with screws. Recesses for them are made even before the fasteners are made.

The lining is fixed with self-tapping screws

Handle insert

Products with screws located outward do not require disassembly. When installing one component of the structure in place, you must try to get into the latch hole with 2 guides equipped with threads for bolts.

Door handle installation diagram

After this, the second component of the device is inserted and tightened with bolts. Screwing must be done evenly for the handle to function properly.

Products with hidden screws must be disassembled. There will be instructions and a special key to help you. The handle can be removed without problems by pressing the stopper with a key. The handle is installed in place after the collapsible part is bolted.

Marking the loot

After installing the handle, make a recess in the tray for the tongue. To do this, you need to take the measurements correctly. Precisely executed markings guarantee good operation of the lock and the door itself.

To make marks, cover the canvas and mark the distance from the top to the bottom of the tongue on the loot. Use a square to find the middle of the castle and put a “cross” in the loot. In the place of the mark, we will drill a recess with tools and get rid of excess material with a chisel.

Cutting a groove in the loot

Before screwing the cover, watch how the canvas closes. If there is no friction or other problems, this means that the groove for the tongue was made correctly.

Close the door and try to tug it slightly. If it wobbles, then this indicates the presence of a slight backlash. Don't be alarmed, this is normal. When a counter plate is added to the groove, everything will fall into place.

The answer is attached flush with the loot. Just like when installing a lock, it should be sunk into the hole.

The strike plate is attached flush with the loot

Sometimes, after installing the trim, the play does not disappear and the doors continue to wobble. This defect can be corrected by using a screwdriver to bend the tab with a small hole on the answer.

Caring for door hardware

In order for a thing to last for many years, it needs to be looked after. It's the same with fittings. Over the years, it ages and wears out, which negatively affects the product as a whole. To slow down this process, do not forget to take care of the fittings.

To care for your hands you need:

Wipe them from dust with water by special means for cleaning. Avoid products that contain acids, alkalis or abrasive particles. They can damage the outer coating of the product, leading to rust. After washing, the product should be wiped with a dry cloth.
Tighten the loose handle. If this is not done, the mechanism will break.
Protect the product from rough mechanical influences.

In addition to the handle, the door lock also needs your attention. Basic care in this case means regular lubrication of the mechanism with special means.. Sometimes sunflower or other vegetable oil is used as a replacement.

Considering that many parts of the mechanism are not easy to reach, a special nozzle in the form of a thin tube is used for lubrication. Often, for these purposes, the cover is removed or the handle is dismantled.

For lubrication hard to reach places handles use a tube attachment

Thus, having studied the basic intricacies of installing the handle, you are able to master this task without outside help. The main thing is to believe in yourself and then the reward in the form of quality installed handle won't keep you waiting long.

Interior doors are sold without fittings; the delivery set includes only the door leaf and the racks from which to assemble door frame. There are no factory-made holes in the canvas for installing locks and handles. This is due to the fact that handles, being standardized, have various designs and sizes. In addition, the choice of accessories depends entirely on the preferences of the buyer. Therefore, a person who has started a renovation and replacement of interior doors is faced with the problem of choosing whether to invite a specialist or install the handles himself. It should be noted that if you decide to install the doors yourself, you will definitely be able to handle the installation of door handles.

Types of handles for interior doors

Door handles for interior doors can be classified according to installation method, method of operation, shape, material, and the presence of a lock.

Based on the installation method, there are stationary (overhead) and mortise models. Overlays are attached to the door leaf, and for mortise ones you need to drill holes in it.

According to the method of work there are:

One of the most popular materials for the production of door handles is brass. In addition to its excellent aesthetic properties, brass is practical and durable.

As a rule, complex locking systems are not installed on interior doors. The exception is a plumbing lock installed in bathrooms and toilets.

Installing a handle on an interior door

Let's look at the installation features of the most popular model for interior doors - knob handles. Handles are usually installed on a hung door, but many experts recommend removing the door leaf for installation. True, this cannot always be done easily.

Advice. If the door leaf is not removed from the hinges and the installation is carried out with the door in a suspended position, move a chair or some object towards it so that the door remains motionless while you work.

Installation tool

You will need the most common tool, which is found in every home:

A marking diagram is included with the door latch, but it is easy to make marks for the holes without it. 1.0 meters are measured from the bottom edge of the canvas on both sides. You need to measure 6 cm from each edge of the door and make a mark. Using a square, draw a strictly horizontal line that will connect these two points. At the end of the canvas, a mark with a pencil and an awl is placed on this line in the center. The latch strip is applied and the veneer is cut with a sharp knife. We remember that the strip must be recessed into the door leaf so that it forms a single surface with the leaf.

Some experts advise starting drilling from the end of the blade with a feather drill. With this sequence of work, when drilling with a crown, the chips will fly into the hole already made, and not clog the teeth of the crown.

The feather drill should go to the depth of the shoulder blade, no more. The drill is pressed to a point at the end of the blade and a hole is drilled. Then, using a crown, holes are drilled alternately on each side of the canvas; there is no need to make them through. As soon as the tip of the crown appears on the opposite side, you must stop the drill and start drilling on the other side. This way the veneer will not be damaged when the crown comes out.

After the holes are ready, using a chisel and hammer, we make a sample along the line cut with a knife under the latch bar. Install the latch and tighten it with two self-tapping screws. It is better to take not the “standard” self-tapping screws that come with the latch (they are usually soft metal), but high-quality ones.

Using the key included in the kit, we disassemble the handle into two parts so that it can be installed. To do this, one mounting screw must be loosened and the other unscrewed. The central rod is inserted into the hole and the fastening screw is tightened tightly on one side. Then the second half of the knob handle is put on the rod, and the second screw is tightened. Self-tapping screws are screwed on both sides, which will cover the decorative overlays and the screws will not be visible.

After installing the knob handle, all that remains is to install the “return” on the box. The door is closed, but not completely, and the upper and lower edges of the tongue are marked with a pencil. Using a square, the distance from the edge of the leaf to the center of the latch strip is determined, and this dimension is transferred to the door frame. Then a “return” strip is applied to the box, the veneer is cut with a knife, and a chisel is used to cut out the strip and tongue. The door is closed and the latch is checked.

Then the strip is installed on the box. Special “pockets” for recesses under the tongue are sold; they are made of plastic or metal. The screws that secure the return strip can be covered with self-adhesive plugs. After this, the installation is complete.

How to disassemble and reassemble an interior door handle?

An installed knob handle can be disassembled in two ways, depending on its design. Unfortunately, most of these models are of rather low quality and often fail.

Disassembling one structure begins with carefully prying and removing the decorative trim. The lining has a special groove, usually it faces down. The ball-shaped handle will interfere with unscrewing the screws, so you need to press out the locking pin and at the same time, with a little force, remove the handle from the central rod. Once the handle ball is removed, it will be very easy to unscrew the screws.

To disassemble the second structure, which does not have a locking pin, you need to press the spring-loaded pin through the technological hole with the key supplied and remove the handle ball. If the key is not long enough (this happens), use a simple nail. Then the decorative trim and screws are unscrewed. If you cannot find the spring pin through the access hole, it means that the knob handle was not assembled correctly. Rotate the decorative trim 180° and the problem will be solved.

The handle is assembled in the reverse order.

Installing door handles with your own hands is quite a troublesome task, especially if a person is faced with this task for the first time. In order to avoid difficulties during the installation process, it is necessary to consider the design and basics. Depending on this, the work may be performed with some differences.

Installation technology various types door handles have their differences

Handle design

Before installing a door handle, you need to understand the design features modern models this type of fittings. Of course, the specific type of system is of great importance, but several general defining points can still be identified.

The design of a standard handle consists of the following parts:

lever;
ring;
kernel;
socket;
travel limiter;
stoppers.

You should also take into account such details as the tongue and locking mechanism, the metal cover on the box, and the tightening screw. The last detail is used when installing a handle on hollow interior doors. It acts as self-tapping screws, fixing the system by tightening opposite sides. You also shouldn’t miss another important piece of the design – the latch. If this type of locking system is present, an additional turning screw must be inserted.

Push-type door handle with tongue for secure door fixation

You shouldn't get down to business if you're not sure you can put everything together. correct sequence with your own hands. Otherwise you may lose important details or completely damage the product.

Types of handles

The process of installing handles on interior doors with your own hands may differ depending on the type of mechanism used. Typically, the following types of handles are installed on interior doors:

On the socket– they are easy to install with your own hands, since there is no need to drill a large hole; it is enough to ensure free movement of the rod. Externally it is decorated with a rosette overlay.
Nobs- This is a rotary system that looks like a round handle with a latch or keyhole. It's pretty convenient option, especially if you install such a system on a bathroom door, but if low-quality materials are used, it quickly breaks down.
Push– to open the door, you need to move the handle to the lower position by pressing it. This removes the halyard latch, which returns to its place immediately after releasing the handle.

The most popular types of door handles

Required Tools

Before you try to install a handle on an interior door, you need to prepare your tools. You don’t necessarily need everything, especially if you purchased the simplest fittings. In order to install handles and latches on the doors with your own hands, you will need:

drill;
screwdriver;
a set of drills, including a “feather” and crowns of different diameters;
chisel;
hammer;
self-tapping screws;
square;
pencil;
stationery knife;
awl;
roulette;
conductor.

The last tool is a template for installing handles. It will facilitate the process of marking and drilling all the necessary holes.

A screwdriver will make the job of installing a door handle much easier.

Installing a handle on an interior door

Before inserting a standard door handle into an interior door, you need to make markings. To do this, use a square and a pencil. Measure the required height from the floor. Usually this value varies between 80-100 cm. If you have a prepared conductor, everything is much simpler. Just screw it to the door from the end. The holes will subsequently align with the tongue trim. So, let's look at how to insert a handle into an interior door with your own hands:

Drill a through hole in the canvas using a drill and a hole saw.
Using a pin drill or a smaller hole saw, drill through the end of the door.
Then you need to put the tongue with the locking system inside and check its operation.
Trace the contours of the trim and remove a thin layer of material so that the piece of iron is installed flush. Screw the part with self-tapping screws.
Insert the rod inside the already installed part. Place a handle with a ring and rosette on top. If the ring rubs against the door, you need to recess it by grinding off a small layer of coating around the hole with a chisel.
Screw the handle with three self-tapping screws or secure with tension pins.
Attach a decorative trim on top. The connection in most models is adjusted with a hex key.

In order to install the metal trim on the frame, you need to mark the position of the tongue. This is convenient to do at the stage of installing this very part into the canvas. Drill or scrape out a recess of the required size in the box. Then trace the iron plate, press it flush and secure it with self-tapping screws.

Lock mortise

It's one thing to install simple fittings, but how to install a handle with a lock on an interior door? To do this, it is better to remove the fabric from the hinges in order to carefully embed the lock.

An example of a high-quality embedded door handle of a simple design in a new leaf

Now let's look at how to properly install a handle with a lock on a door with your own hands:

Mark the position of the lock on the end of the door, outline the contours of the system.
Using a pen, drill several holes in the marked area, and carefully gouge out the rest with a chisel, periodically checking the passage of the lock.
Remove a couple of millimeters of coating to recess the iron plate.
In order to insert the handle, you need to drill a hole on both sides of the blade, suitable in diameter for the free passage of the axis. To mark its position, make a mark on the lock with a pencil, set it temporarily in place and transfer the mark to the door, and then measure the required depth.
Secure the lock with self-tapping screws.
Insert the axle inside and deepen the ring.
Install the handle, lock it in place.

Make a recess on the frame for the pin and tongue to fit into. Press the nozzle flush and secure with self-tapping screws.

If play occurs, it is necessary to file the handle axis with a grinder. Some manufacturers put special marks on it to make this easier.

Latch Installation

Another question - how to install latches on door handles? In most cases, this is no more difficult to do than inserting the handle itself. Let's look at how to quickly install a latch handle on an interior door with your own hands:

Drill an additional hole in the door. It should match the position of the latch mechanism.
Thread the axle into the lock and install the cap on top . You need to install a plug or key lock with reverse side premises. A rotary latch is attached inside.
Fix the position of the parts with self-tapping screws and disguise the fastening with decorative caps, if provided for by the design.
An additional hole is cut on the frame for the latch tongue, if there is one. If the lock operates on the principle of fixing the halyard tongue, no additional recess is required.

As you can see, installing door interior handles doing it yourself is a troublesome task, but quite accessible even for a beginner. Please note that misalignment of parts can lead to rapid breakdown of the fittings.

Interior doors are sold without fittings. Therefore, the purchase and installation of door handles is carried out separately. To do this, you can use the services of a carpenter or insert it yourself.

Types of door handles

When choosing accessories, you need to know what types of handles there are and how they differ from each other. The variety offered in stores allows you to match them to the style of the room and ensures ergonomic use. Depending on the installation method, products are divided into two classes:

invoices;
mortise.

Overlays are attached to the surface and, as a rule, there are no difficulties with them. And mortise ones require preliminary preparation holes in the door leaf.

Mortise products can be of two types:

Rotary, also called knob handles, which, when the handle is turned, open or close the latch that holds the interior door closed. In most cases, they are made in the shape of a ball or disk.
Push ones work on the same principle as rotary ones, only the mechanism is activated by pressing the handle. As a rule, they are sold together with a lock or latch, which is where another name for them comes from - push handle latches. Fittings with a push mechanism are widely used for both interior and entrance doors.

Which type of product is best to choose depends only on your preferences. You should also consider the style of the room. Designers advise buying them the same for all doors in one room.

The height at which the door handle should be is not clearly established by any standards. On average, it is placed at a distance of 1 meter from the floor. This value can fluctuate up or down depending on your preferences. It may also depend on the height of those who will constantly use the door. When installing, you can build on the level at which other handles in the room are located so that their height is the same.

Tools

In order to insert a handle into an interior door, you need to have a certain set of tools. It includes:

tape measure, square and pencil;
chisel;
screwdriver, drill;
drill, crown.

Using all the necessary tools greatly simplifies the work process. It is quite possible to embed the fittings without a screwdriver and a crown, but in this case the work will take much longer.

Installation of fittings is ideally done when the canvas is removed from its hinges. If this cannot be done, then you need to securely fix it in order to carry out the marking and insertion efficiently and evenly.

Before you start installing, carefully study the instructions for the door handle. All the sizes are listed there, and you will know what diameter of crown and feather you will need for the job.

The instructions below will help you place the handle on the door leaf and avoid mistakes. And for those who are encountering this matter for the first time, it will be useful to watch a video on this topic in order to have a visual idea of the upcoming installation work.