Plasterboard ceiling in the hallway: design rules. Do-it-yourself plasterboard ceiling in the corridor GCL ceiling for a square corridor

The first room where guests of your home enter is the hallway. Every home, like a theater, begins with a coat rack. And the impression people make about the entire interior as a whole will depend on what impression these first meters make. One of important details each room has a ceiling, which is usually panel house not ideally smooth. But even ceilings are the dream of every apartment owner. And this can be achieved. The most optimal solution would be to use a suspended structure made of plasterboard.

Peculiarities

A lot of people still live in old high-rise buildings. Therefore, the issue of optimizing the space of small rooms is extremely pressing. After all, these houses, as a rule, instead entrance group have a long narrow room. They try not to clutter up such a hallway with a lot of furniture. To make the space seem more spacious, all surfaces are painted or wallpapered using bright hues. But there is another technique for visually changing space: optimal design of the ceiling plane.

Currently, traditional ceilings have been replaced by modern and sophisticated options. Ceiling systems made of plasterboard are distinguished by their versatility and original solutions.

Plasterboard sheets have numerous positive characteristics:

environmental cleanliness;
energy saving;
soundproofing;
flexibility;
breathability;
moisture resistance.

All these qualities make drywall one of the most popular materials for the manufacture of all kinds of three-dimensional structures: it can be a wall, a partition, a niche. Plasterboard ceilings have also become very common.

Advantages and disadvantages

Quite unusual ideas can be realized with the help of a plasterboard ceiling structure.

This is due to the fact that such systems have many positive qualities:

low cost;
the weight of the plasterboard sheet is small, this makes installation simpler;
simple design compared to other types of suspended structures;
no preparation: there is no need to remove old whitewash, which greatly simplifies the work and saves time;
cleanliness during work;
received Smooth surface does not require additional processing, it also hides unevenness in the floor;

variety of finishes - paint, plaster, wallpaper;
the ability to hide all communications - ventilation ducts, climate systems, electrical wiring and other wires and cables;
a variety of lighting options - multi-level, spot, open and closed lamps;
the flexibility and plasticity of plasterboard sheets helps in creating any shapes and bends of the structure;
possibility of installing single-level, two-level and multi-level systems

It is necessary to note some negative aspects:

fragility;
slight reduction of the room (height can be reduced from 5 to 10 cm), in rooms with very low ceilings used with caution;
prohibition on hanging heavy objects, such as chandeliers;
insufficient moisture resistance - flooding of the apartment by neighbors will negatively affect the condition of the structure;
plasterboard for the ceiling is best used in old houses, since a new building can shrink and the plasterboard structure can crack;
White color The ceiling may fade over the years, and the structure may become slightly deformed.

Kinds

Plasterboard suspended ceiling systems vary in the number of levels. There are single-level, two-level and multi-level ceilings.

Single-level ceiling- the easiest to manufacture, which at the same time can serve as the basis for a multi-level system. A perfectly flat surface – this is what a single-level system looks like after installation.
Multi-level ceiling- a more complex design that creates completely arbitrary patterns on the ceiling surface. The system allows you to arrange lighting in an interesting way. These are spotlights with LEDs, or you can add lighting between levels, which not only looks impressive, but also visually raises the ceiling level.
One of the modifications of the multi-level system is two-level ceiling. It is relatively simple to manufacture, but it can be used to create spot lighting.

Installation of a plasterboard suspension system is based on frame structure. It can be open or closed. Using the open variety, the frame elements themselves can serve as additional decorative elements in the interior.

For small spaces

In a small and narrow corridor, installing a suspended plasterboard system is perhaps the most correct solution for decorating the ceiling surface.

Thanks to the thoughtful design of the ceiling, it is possible to achieve a visual increase in the entrance area.

When installing a multi-level plasterboard system in a narrow corridor or hallway, it is recommended to use clear graphic lines.
A two-level ceiling with a rectangle or square, recessed in relation to the main level, will visually expand the space.
In an elongated corridor, it is possible to construct several similar geometric elements at once.
The color scheme of the ceiling of a small hallway must be light, ideally white, which gives a visual expansion of the volume.
The design of lighting systems is of particular importance. Here it is important to use many point light sources, which will add airiness and lightness to the interior.
If you successfully place spotlights or LED strip, it is possible to create a unique ceiling structure even in a small room.

Plasterboard ceiling system in the hallway correct selection colors and a successful lighting system can change the image of even a tiny hallway and make it more spacious and attractive.

In the big room

If you happen to be the lucky owner of a large room in the entrance area, it is also possible to use a modern plasterboard system, which in this case will help bring to life even the most extravagant and unexpected solution. After all, here you can afford to build both a single-level and multi-level ceiling. The main thing is that such a solution is harmonious and fits into the overall design concept of the apartment as a whole.

It would be better to take the advice of professional designers:

An original technique for a large hallway is the use of a multi-stage plasterboard system. This heavy, at first glance, design will become almost weightless thanks to a well-thought-out color scheme, as well as due to the equipment of a spot lighting system. When installing a lighting system, experts recommend using several simultaneously different types light sources, which creates the effect of “floating air” and illuminates all the dark areas of the corridor.
Planes with smoothly curved lines always add special luxury to the interior. This technique creates the impression of blurring the strict boundaries of the ceiling, and the space becomes more airy and light.
It is possible to design the ceiling surface in harmony with the overall color scheme. Another approach is to use contrasting interior design techniques, thus drawing attention to this element. This will highlight the ceiling plane from its context, making it the highlight of the hallway.

Living in a house, we do not pay attention to the hallway, running through it in a hurry. But what has become unnoticeable for us is for guests the object of their first acquaintance with the house and it is from this that they make their first impression. There is no universal answer to how to decorate the ceilings. It all depends on financial condition and personal preferences. But now this type of finishing is popular: suspended ceilings from plasterboard. What are their advantages and how to install them step by step on your own we will look at in the article.

Suspended structures completely hide the ceiling. Many people use this property to cover all the shortcomings. If you have uneven ceiling with holes and cracks, then you don’t have to worry about bringing it to perfect condition, but simply close it.

You don't have to spend money on additional ceiling preparation. There is no need to plaster or putty. But it’s better to treat the ceiling with an antifungal primer. The presence of mold will not be noticeable, but it can spread to the structure and completely ruin the ceiling.

Drywall is not afraid of heating. In this it differs significantly from stretched fabric or plastic. For lighting, you can use any lighting fixtures. But still, you should not place open light close to the material.

Suspended plasterboard ceilings for the hallway are inexpensive. They do not belong to budget types of finishing, but are cheaper than tension or wooden structures. You can install the ceilings yourself, so you can save on specialists. But if your plans include a structure of several levels, then you should still invite specialists. It is almost impossible for beginners to cope with such work.

Drywall does not support combustion and is not afraid of weak mechanical stress. He is not afraid of small blows.

Some people imagine plasterboard ceilings as something boring and monotonous. In fact, the design of such structures provides wide scope for imagination. You can make one level, or you can make several. There are options with a simple flat ceiling or a figured ceiling, a frame ceiling, etc. Variety of colors and decorative elements will decorate any interior.

It is especially convenient to use drywall to divide a room into zones. If you have a large space and you don't feel comfortable in it, plasterboard ceilings will help you fill it up.

If you liked these ceilings, then you should know about their disadvantages. Drywall will not withstand long-term use in a damp room. He likes it dry. It cannot be cleaned frequently; wet cleaning will certainly deform it. In addition, despite the fact that such ceilings can last more than 10 years, you will still have to periodically update them: paint or varnish them.

Another drawback that applies to all suspended-type designs is that they take away centimeters from the ceiling. It will be 5 or even 10 centimeters lower. Other types cope with this due to mirror surfaces, but drywall cannot offer this. Therefore, before installing it in small corridor, it’s worth weighing everything carefully.

Preparing the ceiling before installation

Surface preparation important stage before finishing, do not neglect it. Even considering that the plasterboard structure hides it, since you have already started making repairs, why not put it in order completely.

First of all, clean the surface of the old coating. Nothing should be left. Treat the surface with a primer. The primer used must be waterproof and have antifungal properties. This is done to prevent mold from forming on the ceiling. It is necessary to apply a primer. Then fill the holes with putty and level the surface with plaster. These works are not necessary when installing suspended structures. Remove all light fixtures. If you plan to change their location, then the wires are adjusted to the future location at this stage.

GKL sheets are attached to a frame that is installed on the walls. Therefore, before installing the sheets, you need to mark the location where the frame is attached. On paper, draw a drawing of the future structure. This will help you not get confused in the future. Mark on paper the location of the hangers and lighting fixtures. The markings are applied using a level. If you have a laser, then use it, it is more accurate and more convenient to work with. Since apartment ceilings are often uneven, measure all corners. You need to draw the line from the lowest angle. Markings can be applied with a pencil or using a rope.

After the marking is ready, calculate the area of the room. This is needed to purchase materials. To calculate the length of the profile, add up the length of all the walls, this will be the length of the profile. Buy sheets based on the entire ceiling area. Do not buy back to back, it is better to buy 1-2 extra sheets, this will save time if you damage one during the process. After graduation preparatory work you need to prepare the necessary tools.

Required tools and materials

No specific tools are required for installation, so everything you need can be found at home. What you will need:

GKL sheets
Guide profile
Support profile
Suspensions
Screwdriver
Hammer
Self-tapping screws and dowel-nails
Level
Hacksaw
Putty

Installing a plasterboard ceiling in the hallway with your own hands

According to the markings, holes for the profile are first drilled. You need to drill them at a distance of 40 cm. Then attach the hangers 60 cm from each other. Now it’s the turn of the supporting profile. The distance between them depends on the size of the sheets. Install them so that they are located at the junction between the sheets. The ears of the hangers need to be bent. The frame is ready.

Installation of sheets starts from the corner. They are fastened with dowels, nails and self-tapping screws. If you have sheets larger than the cells of the frame, then they need to be cut. This can be done with a hacksaw. Place all the sheets on the floor to begin with. Make holes in the required ones for the chandelier or lamps. The seams between the sheets are sealed with putty.

The design of a plasterboard ceiling in the hallway is a new direction finishing works and is extremely popular. Installation of such a structure is exciting process which requires imagination and creativity. Thanks to the unique properties of drywall, enormous opportunities have opened up for designers. original design ceiling, and the chic choice of textures and colors of the material allows anyone to turn a simple hallway into a “dream room”.

Advantages and disadvantages

As you know, the ceiling is considered the finishing touch in the interior of a room, and the corridor is no exception. Modern plasterboard compositions will help decorate its upper space with an unusual look.

Such suspended structures are not only famous for their attractiveness, but are also widely used in home design, as they have the following advantages:

Possibility of creating ideal surface for works. Smooth sheets of drywall hide well all the roughness and unevenness of the base, which is important when repairing a panel house;
Don't need preliminary preparation ceiling. Installation work can be done on old whitewash. This reduces time and simplifies the installation process itself;
All communications are well hidden, so if there is electrical wiring, climate control systems and a ventilation duct in the corridor, they will become invisible;

Allows you to choose any type of lighting. As a rule, spotlights, multi-level and open lamps look beautiful in hallways;
Plastic. Thanks to this characteristic, plasterboard ceilings acquire unusual shapes. The two-level design with lighting looks special. It visually increases the space;
Quick installation and withdrawal;
Affordable price.

Like any other material, drywall also has its disadvantages:

Not suitable for rooms with high humidity;
Reduces the height of rooms by 10-15 cm, so it is not recommended for low hallways;
Newly constructed buildings may crack or warp as they shrink;
Sometimes changes color during use.

All suspended ceilings are mounted on special frame, which by its design can be closed or open. If the design uses open method installation, then sheets of drywall become an excellent basis for additional decor. Various patterns are applied to their surface or the partition is made with film, which ultimately looks original. The combination of such elements allows you to use unusual textures and colors, so the hallway design is unique and effective.

Ceiling options

Individuality should be in everything, especially when it comes to home design. For each person, a home represents a unique world where you can enjoy comfort and warmth, so you need to select a special style for its design.

The entrance hall is considered the face of any home - the room that first catches the eyes of guests. From proper organization its space and layout will depend not only on the general impression of the owners of the “family nest”, but also on their taste for beauty.

Furniture arrangement, wall decoration and flooring in the hallway will only serve as the beginning for decoration. To complete the image of this room, it is also important to consider options for installing the ceiling.

Installation plasterboard construction They begin with a preliminary selection of design, which should harmoniously emphasize the entire interior of the room.

Often the main problem with the design of a hallway is considered to be its small size; in these situations, designers recommend using a single-level type of ceiling. Thanks to modern methods finishing, from such a simple and smooth composition you can make an unusual surface.

Of course, decorative ceiling plasterboard can be installed in hallways of any size, but its shape and finishing method will depend on the area of these rooms, so for small corridors it is best to choose light ceiling colors.

Using design secrets and craftsmanship, the space of the room can really be changed and expanded.

If the owners of the house got a miniature hallway, don’t be upset, just follow the following tips:

Use installation of multi-level systems with clear graphic lines. This is a great option for narrow spaces. For example, squares or rectangles “recessed” into the overall composition will visually enlarge the room. This is especially suitable for elongated corridors;
When designing, give preference to light colors in warm, pastel colors;
Give Special attention arrangement of lighting. On the ceiling surface should be used maximum amount lamps. Thus, the room creates a feeling of lightness and airiness.

It is considered a great success to have a huge hallway in the layout of your home. With such chic dimensions, you can turn both original fantasies and extraordinary solutions into reality. Volume large rooms allows you to install single-level and multi-level systems; their choice depends on personal tastes and design style.

Stepped plasterboard decorations may seem heavy at first glance, but thanks to correctly selected colors they will harmoniously fit into the look of the hallway and become almost weightless.

For spacious rooms, as a rule, choose ceilings with smooth transitions and lines. Thanks to them, strict boundaries are smoothed out on the canvases and the impression of unusual freedom is created. In addition, in such hallways you can use various color scheme. In this case, the decorations are made both to match the tone of the general style and to be contrasting, highlighting individual zones.

As for the texture of the ceiling, it can be matte, glossy, or combined in an unusual combination of materials. For example, glossy compositions with matte edging look impressive. If you want to give the hallway a touch of modernity, then you should use more in original ways decorations and decorate the surface with painting or photo printing.

It is also important to take into account one important point: you cannot use more than three shades on the ceiling.

To highlight the corridor in a special way in the design of the house, it is recommended to decorate its ceiling with a mirror surface. It is also worth noting that with the right selection of lighting and colors, any hallway can be transformed into a cozy and modern room.

How to change the size of the hallway

The traditional hallway is a narrow and long room. In this regard, when arranging this room, it is not possible to place many pieces of furniture, and in order to enlarge it a little, use a play of lighting and paint the ceiling in light colors or paste it with wallpaper in pastel shades.

Besides all the design tricks, important point counts correct design hanging structures.

If the multi-level system is painted white, then the decoration of the upper surface will turn into a weightless space, and all its seemingly heavy, massive details will smoothly smooth out, making the room visually high.

Great option In the design of ceilings, the use of smooth lines that have no boundaries is also considered. In order for such ceilings to fill the hallway with harmony, it is also important to worry about choosing sophisticated furniture models that will be reflected in the mirror and beautifully complement the overall interior.

Great idea For visual increase space is considered a combination in the decoration of the ceiling of black and white flowers, in this case, light colors should predominate, and dark shades will only help create a contrasting accent.

Ceiling and lighting

Lighting plays a huge role in the hallway. As you know, ordinary chandeliers have long gone out of fashion, besides this, modern designs made of plasterboard “doesn’t look good” with them. Therefore, in most cases, when decorating the ceiling in the hallway, preference is given to beautiful spotlights. If you choose the right model and quantity, then the arrangement of the room can be considered complete.

These lighting devices help create stunning lighting effects, while increasing the height of the room, making it original and aesthetically attractive.

The times when whitewashing was the only way to restore the appearance of a ceiling are long gone. There are now many options, each of which has both pros and cons - the latter mainly being complexity self-installation and unavailability of some materials. Arrangement of the ceiling in the corridor made of plasterboard can be called the most popular solution, which can be inspired by photos of beautiful interiors made using this material.

Benefits of drywall

For those who prefer to do repairs on their own, gypsum board is an excellent material that does not limit freedom of choice in matters of design. In addition, plasterboard is relatively inexpensive and easy to use: if you have an assistant, installing such a ceiling is not difficult.

The main advantages of the material include the following:

Nice appearance. A smooth, even sheet of gypsum board is quite attractive even without additional painting.
Good sound and heat insulation properties.
Safety of use. The gypsum sheet is made from a mixture of building gypsum, PVA glue and starch, placed between cardboard sheets: if it is made in accordance with GOST, it can be used in any room.
Breathability. This property determines both the ability to absorb moisture and release it: thus, the room will never be too wet or dry.

It should also be noted that plasterboard sheets do not weigh too much and are convenient for installation of both suspended and false ceilings.

The peculiarity of gypsum board, thanks to which it has gained such popularity, is its flexibility. Sheet transformation can be done either wet or dry, creating a huge variety of designs of any shape.

An important point: despite its elasticity, drywall is a fairly fragile material, so care must be taken when working with it. When making curved elements, you need to carefully study the technology so that the products do not break during the creation process.

To the listed advantages of the material one can add its relatively low cost. Compared to many other methods of finishing ceilings, installing plasterboard is more profitable financially, including because it does not require the involvement of large quantity people to carry out the work.

Plasterboard ceiling in the corridor: advantages

Narrow corridors are often a continuation of the hallway. Here you need to visually expand the space, which is easy to achieve using multi-level light structures made of gypsum board. In addition, the walls in the corridor cannot always be used to create unique design Therefore, it is appropriate to make the ceiling the main interior feature here.

Lighting plays an important role in the design: it can also be used to visually increase the volume of the room if you install not a massive chandelier, but small spotlights, which are most popular when installing plasterboard ceilings.

An interesting option is when fancy curved elements are mounted on the ceiling, additionally illuminated with LED strip. When installing such equipment, it is advisable to take the advice of a designer who will help turn the room into a real art space.

Note: low ceiling heights are not an obstacle to installing drywall. In this case, preference should be given to the hemming method of fastening rather than the more familiar hanging one. In this case, the height will decrease only by the thickness of the sheathing mounted to the rough surface.

The advantages of a gypsum ceiling in terms of decorative possibilities are obvious. As for practicality, drywall requires some care in operation: it must be protected from dirt, dust and grease. However, this problem can be easily solved by painting the ceiling. suitable paint: enamel, water-based, acrylic.

How to install a gypsum ceiling: preparatory stage

The first thing to do is make a list the right tools and materials. To construct a plasterboard ceiling of any type, the following is required:

gypsum boards;
metallic profile(wall and guide);
straight hangers;
fasteners (screws and dowel-nails);
putty for sealing joints, screws and small irregularities.

If you plan to decorate the ceiling, it is advisable to purchase “liquid nails” or gypsum glue in advance - depending on the material from which the decorative elements are made.

Next you need to check if all the tools are available. A hammer drill is a necessary thing if the rough ceiling to which the profile will be attached is concrete. In other cases, you can get by with a screwdriver. In addition, you will need:

level;
plumber's scissors for cutting profiles;
cutter for connecting profiles;
a knife for cutting gypsum board and an edge plane.

To cut holes in a plasterboard sheet for lamps, sockets or a chandelier, it is convenient to use a special tool - a knife-saw. A hole saw is used for the same purposes.

After acquisition and preparation necessary materials and tools, you can begin the first stage of creating the ceiling - marking. Definition of the lowest point - key moment, it depends on its position whether it is possible to install a false ceiling in the corridor or whether a suspended ceiling will have to be installed.

TIP: before proceeding with marking and actual installation, you should make sure that the rough surface is well prepared. If there is crumbling plaster or any other unreliable coating on it, you need to get rid of it.

After determining the bottom (zero) point, horizontal lines are drawn on the opposite walls, along which the sheathing or guide profile is then mounted.

false ceiling

In a narrow corridor it is not always advisable to create complex designs: simple may well be enough single-level ceiling. If the difference between the lowest and highest points that determine the height of the ceiling does not exceed 2 cm, a suspended ceiling can be constructed. This method requires less time and financial costs.

To create a structure, you need to make a wooden or metal sheathing, which is mounted on the base ceiling and walls. Plasterboard sheets are attached directly to it. If you plan to install electrical wiring under it, a sketch of its location must be made in advance.

It will not be possible to place spotlights or any additional equipment with this method of creating a plasterboard ceiling - the height of the gap between the rough and mounted ceiling will not be enough. This distance can be increased by setting it to base surface inserts the right size, and attach the supporting frame to them. However, it is more advisable in such a situation to install a full-fledged suspended ceiling.

On a note. Sheets of plasterboard must be laid staggered, and the joints of the panels must coincide with the load-bearing parts of the frame and be attached to them. To avoid cutting and adjusting solid sheets of gypsum board, it is recommended to pre-set the optimal distance between the parts of the sheathing.

A suspended ceiling can only be one-level and does not provide wide possibilities for interior design, but this option is quite simple and fast. In addition, with this installation method, the ceiling height is reduced slightly.

Suspended ceiling

Multi-level ceilings can only be suspended - fastening using lathing is not suitable for them. However, for those who want to implement any creative idea, this option is much more interesting. In addition, in this case, you can build a ceiling with shaped elements: the metal profile and plasterboard sheets can easily be deformed in accordance with the chosen shape.

Single-level suspended ceilings are convenient if you need to hide communications or install spotlights, the length of the base of which requires a certain amount of gap between the rough surface and the drywall.

With this type of construction, preliminary markings are also used - not only on the walls, but also on the ceiling, to place hangers. The guide profile is mounted along the perimeter of the corridor according to the markings, and U-shaped suspensions are attached to the ceiling. This standard parts, which are used most often, but in some cases knitting needles may be needed. These are longer hangers needed to lower the ceiling to a lower height.

An important point: if the width of the corridor allows, and solid sheets of plasterboard are used for repairs, then the supporting profile must be placed on the guide every 60 cm. Since the size of standard plasterboard is 120 cm, the position of the supporting profile will correspond to each side of the sheet and its middle - this will help ensure maximum rigidity and strength of the entire structure.

The construction of the frame does not end there: in order for the ceiling to be level, the profile must be leveled. This can be done using building code or thread. After the profile has been adjusted over the entire plane, it can be screwed to the hangers.

The next stage is laying plasterboard sheets, the process is quite fast if all the work before it was carried out carefully and correctly. The gypsum board rises to the ceiling and is fixed with several screws, after which the sheet can be released and finally secured. It is recommended to constantly measure the distance from the laid drywall to the wall, trimming any protruding edges as necessary.

Note: With this installation option, gypsum board sheets should be laid in a checkerboard pattern, avoiding complete coincidence along the seam. This will provide greater rigidity to the ceiling and prevent cracks in the putty and paint.

In this way, the ceiling of the entire corridor is mounted, after which you can begin roughing and finishing. Here you can implement many design ideas: paints adhere perfectly to drywall, decorative plaster, wallpaper. An excellent decoration is stucco molding made from gypsum or polyurethane, which can also be painted in a suitable color.

What could a plasterboard ceiling look like in a hallway (the photo gallery in our article will inspire interesting ideas) modern house, apartment or even office? Is it possible, using ordinary plasterboard sheets and a frame, to create creative designs that can set the tone for the entire interior? What techniques do designers use when designing spacious, narrow, standard corridors? More on all this below.

Plasterboard ceiling for the hallway - what justifies the choice

The modern plasterboard ceiling in the hallway pays off in all respects.

Affordable and easy to install, the material also demonstrates whole line benefits, including:

environmental friendliness and safety;
energy saving properties;
soundproofing;
moisture resistance;
breathability;
elasticity.

To Work with plasterboard sheets nice and convenient. Without extra effort and what is important, skills and experience, you can decorate a spectacular, flawless ceiling in a room in a day.

Among a number of positive aspects, it is worth noting some nuances that you need to know about when planning a plasterboard ceiling in a corridor in a simple or complex interpretation. Despite its flexibility, the material is quite fragile and requires careful handling.

In addition, structures, especially those based on several levels, “steal” the height of the ceilings of the room.

To eliminate the effect of oversaturation when installing structures in narrow corridors with initially low ceilings, you need to properly plan the design and think through the lighting.

Plasterboard structures: possible variations

There are several options for installing suspended plasterboard ceilings in the hallway, depending on the design idea and the characteristics of the room. These could be designs:

single-level;
two-level;
multi-level.

The latter option is used extremely rarely and only in spacious hallways with high ceilings. IN residential buildings In apartments and apartments, simple one-level structures are most often installed, trying to maintain the height of the ceilings practically unchanged.

Two-level structures, provided they have the correct geometry, combination of colors and lighting, can decorate the room, place the right accents, and visually change the parameters for the better.

Small hallway - design tricks

Most often, the corridor is inferior in parameters to the rest of the rooms in the apartment or house. Taking into account its features, when planning the installation of the ceiling, you need to try to visually increase the space with its help. Properly designed plasterboard ceilings in the corridor solve several problems at once:

bring light into a dark room without natural light;
visually “expand” the walls and “raise” the ceiling;
complement the interior design;
protect the room from moisture;
maintain an excellent level of sound insulation.

It is allowed to install a two-level ceiling in a narrow corridor, subject to simple recommendations. To achieve the right effect you must:

avoid blurry lines and contours;
adhere to clear geometric shapes with central recessing in relation to the perimeter to visually expand the space;
use decorative elements of strictly elongated shape;
use combinations of light and warm tones.

In addition, planning functional design ceilings, it is necessary to think over the location and combination of lamps, with their help smoothing out the shortcomings of the room and focusing on the advantages.

Spacious corridor - unlimited field of activity

For large rooms, the options for plasterboard ceilings are more varied. The more space, the easier it is to think through, place and install the structure. This is why you can so often find interesting designer designs in spacious corridors. multi-level ceilings with built-in lighting and stretch fabrics.

Designers recommend that even in spacious corridors, try to use the space as efficiently and intelligently as possible. It is important to think through the design down to the smallest detail and plan the lighting in advance, using, for example, a technique with height differences and LED strip.

In spacious hallways, you can afford to use large geometric decorative elements in subdued colors and experiment with combinations bright colors to design different levels of the structure.

A large corridor should not be a call to create a complex structure overloaded with details. Not always beautiful ceilings- multi-level with numerous decorative elements. You can make the right accents and complement the interior using a minimalist design with a perfectly flat and smooth surface without excess details and light.

Design secrets - revealing the secrets of the masters

To design a beautiful and practical ceiling in the corridor, you can use general advice designers, repeatedly tested in practice.

Experts recommend not limiting your imagination in terms of use in spacious rooms. color palette. It is permissible not only to make the ceiling in a bright color, but also to combine several rich shades to enhance the effect, while not forgetting the main rule of three colors.
It is not at all necessary to install a ceiling that meets general style premises. It is allowed for the design to be the opposite of the general concept, thus attracting the main attention.
The texture of the ceiling should also not be limited to one solution. This can be a design with a matte, glossy or combined surface. As a nice bonus, you should consider photo printing, 3D images, or even hand-painted ceilings.

Plasterboard structures in the corridor can be combined with mirror surfaces to create an infinity effect, which can be enhanced by correctly placed spotlights and colored LED strip.

All these techniques will allow you to focus on the ceiling and visually adjust the parameters of the room, if you adhere to the main rule - the design of the structure must be planned taking into account the features and dimensions of the corridor.

Narrow hallways - how to decorate the ceiling correctly

A long and narrow corridor can be visually expanded quite simply using a plasterboard structure. Several effective techniques are used for this. One of them is dividing the surface into geometric regular shapes, each of which is additionally framed by a high plinth.

An important point is thoughtful lighting. With its help you can make even the narrowest corridor visually spacious and comfortable. Spotlights placed along several lines, starting from the center and ending with the sides of the structure, are suitable. The closer to the edge, the smaller the lamps should be.

In narrow corridors you should not install chandeliers, especially massive and large ones. If you cannot do without them, then it is better to choose miniature and lightweight models.

The color scheme also matters. Narrow corridor and dark ceilings are incompatible. In such rooms, only light and cold colors will be appropriate; finishing with a reflective effect is allowed.