Helpful Hints
Things made with your own hands are always more valuable and more expensive. We bring to your attention a master class, thanks to which you can learn how to make not only beautiful, but also useful things from plastic bottles.
See also: palm tree from plastic bottles
Bird dispenser from a plastic bottle
You will need:
- 1 liter plastic bottle.
- 2 wooden spoons.
- Screw.
- Rope.
1. Draw a hole with a radius of 1 cm at a distance of 10 cm from the bottom.
2. Rotate the bottle 90 degrees and draw another hole with a radius of 2 cm, opposite the first one.
3. The same process must be repeated at a distance of 5 cm from the bottom.
4. Then carefully cut out all the drawn holes with a knife.
5. Now you can insert spoons.
6. To hang the bottle, you need to fasten a screw or screw to the bottle cap and hang it on a rope.
7. Finally, you can fill your tank with bird food.
Do-it-yourself seedling dispenser from a plastic bottle
This is a real garden that moisturizes itself, and you need to make a minimum of effort. In addition, crafts of such pots diversify children and fresh parsley, sage, rosemary and thyme are always needed in the kitchen.
You will need:
- Marker.
- Sturdy 1 liter plastic bottles with caps.
- Scissors.
- Label remover (e.g. vegetable oil).
- The soil.
- Saplings (they can be purchased in the vegetable departments of supermarkets).
1. Mark a line 12 cm from the bottom of the bottle.
2. First, pierce a hole on the marked line with a knife, and then cut the bottle in a circle with scissors.
3. Remove labels with vegetable oil.
4. Insert the top of the bottle with the cap into the bottom base.
5. Fill the top with soil.
6. Fix the seedling by gently pressing it down with soil.
7. Add water to the bottom of the bottle so that the water covers the cap.
8. After that, some water will be absorbed by the soil and you need to add water, following the instructions for a particular plant.
Craft a pencil case from a plastic bottle
Unnecessary plastic bottles can fit into the right and convenient pencil case. The proposed thing can be improved, it all depends on your imagination.
You will need:
- Empty, washed and dried plastic bottles (in this case 6 pieces).
- Scissors.
- Old newspapers.
- Paint in bolognese.
- Paperclips.
- Glue (it is necessary that it glues the plastic well, but does not corrode it).
1. Lay the bottle on its side and carefully insert the knife blade at the base. Cut along the bottom edge.
2. Repeat the procedure with the rest of the bottles.
3. Place all received products on the old newspaper with the bottom up.
4. Spray the paint on the outside of the products in several layers.
5. After the bottles are dry, it's time to line the edges of the cut with felt. The felt strips should be slightly longer than the circumference of the bottle. Glue the material evenly and carefully to each section of the bottle.
6. Wait 15-20 minutes for the glue to dry. It is better not to touch the extra, remaining felt for now.
7. Secure the felt with paper clips for a better bond. Wait another hour and then cut off the rest.
8. Decide where exactly the whole structure will stand, and glue all the bottles together from the side of the felt along the edges with glue. For a good strength of the entire pencil case, do not spare glue.
9. The glue must dry completely. You can fill your pencil case. All is ready!
Crafts from caps from plastic bottles for the garden
Sealed bag
1. Trim the thread on the neck of the bottle.
2. Install plastic bag through the neck and screw on the lid.
This seals the bag, which contributes to the long-term storage of products.
Original curtains from covers
Like these ones original curtains as interior doors can decorate a house, cottage or apartment.
Just connect the caps from plastic bottles together with fishing line or thread. At the same time, the curtain pattern can be limited only by your imagination.
DIY paintings from covers
Plastic bottle caps can even work for fine art.
Try to make such a picture, because even children can do it.
You will need:
- Canvas (any size desired).
- Plastic bottle caps.
- Paint (acrylic) and brush.
- Pencil.
- Ruler.
- Glue (not fast drying).
- Assortment of jewelry, balls, mosaics or buttons.
1. Using a pencil and ruler, mark sections on the canvas.
2. Glue one large plastic cover in the center of each section. Next, you can glue the covers different sizes and forms first.
3. Paint the entire canvas with black paint and let dry.
4. Glue an assortment of jewelry in the center of each lid and let dry.
5. Now the sections can be colored as you like.
How to make plastic bottle toys
DIY snake toys
Make funny snakes out of foam by creating a simple device at home!
You will need:
- Scissors.
- Plastic water bottles.
- Old towels.
- Rubber strip.
- Small bowl.
- Dishwashing liquid.
1. Trim the bottom plastic bottle.
2. Secure the towel to the bottom of the bottle with a rubber band.
3. Dip the bottle, towel-side down, into a bowl of soapy water. After that, you can create snakes from tiny bubbles.
Important! Care must be taken to prevent soapy liquid from entering the mouth and eyes.
DIY crocodile toy
You will need:
- Two half liter plastic bottles.
- Bottle caps.
- Scissors.
- Glue.
- Thin paper.
- Tassel.
- Waxed paper.
- Eyes (for example, buttons can be used).
1. Using a knife and scissors, cut the bottles in half, then cut one piece so that the height remains 7 cm.
2. Trim the edges of the bottles so that the crocodile is bent.
3. Glue the legs-lids to the crocodile evenly.
4. Make thick balls of paper and attach them like crocodile eyes.
5. Cover the entire body with thin green paper.
6. Cut out waxed paper and glue on paws, eyes and teeth. Paint your teeth in White color and the nostrils and eyes are black.
Instructions: a vase from a plastic bottle
1. For convenience, cut the bottle on the upper contour.
2. Measure and evenly cut strips around the bottle. It is more convenient to do this by cutting wider segments in half.
3. Gently press and fold all strips outwards.
4. Press the bottle, setting it upside down on flat surface. This will help even out the edges.
5. Fold the end of each strip under the next two. Do this so that the tip of each strip is in the place indicated in the photo.
You can add balls and stones to produce beautiful game light in the sun. Since the vase will be very light, the weight can contribute to proper balancing.
Warning! Such a vase will be subject to large temperature changes. Therefore, do not leave it near heating units in order to prevent thin strips from spreading.
Large lamp in the garden from a plastic bottle
The bottle is used as a light source. Such an invention is capable of making a lamp with a large illuminated space from a small lantern.
How Alternative option you can use a bleach solution in a bottle for the best light diffusion.
Universal spoon from a plastic bottle
Here is such a simple, but at the same time, sometimes very necessary spoon (for example, at a picnic) can be cut out of an empty plastic bottle.
Making food containers from plastic bottles
The idea is to use two plastic bottles to make a storage container for food like beans, rice, noodles and sugar.
Just cut out bottles of different sizes: the long one will be the base, and the short one will be the lid. Choose a size so that the lid closes easily and at the same time tightly.
Watering from plastic bottles
If you have a large garden, but do not have time for watering and do not want to spend money on newfangled expensive structures, then we present a simple idea sprinkler.
Helpful Hints
Products made of plastic are used everywhere, as they require less investment to create than products made from other materials.
However, discarded plastic can take hundreds or even thousands of years to decompose, which is why it is very important to recycle it or refuse plastic altogether.
The second option is very difficult to implement today, so recycling comes to the fore. Plastic can be given to special recycling plants, or you can make useful things out of it.
In this collection, you will learn how to make various useful things for your home and garden from plastic bottles.
1. Do-it-yourself ottoman from plastic bottles step by step
You will need:
Plastic bottles
Foam rubber
Knitting needles
Ruler
Scissors
Sewing machine
1. Wash and dry several plastic bottles with caps on. Gather all the bottles in a circle and tape them together.
2. Cut out two circles from the cardboard so that they cover the top and bottom of all connected bottles. Tape these circles to the connected bottles with tape.
3. Prepare two rectangular pieces of foam rubber and one round piece. Rectangular pieces need to cover the side collected bottles, and a round piece of the upper part. Secure everything with tape.
4. From any fabric, make a cover for your seat. If you like knitting, you can knit a cover.
2. We make a do-it-yourself faucet extension from plastic bottles
It will be more convenient for children to wash their hands.
3. Products from plastic bottles with your own hands: a pocket for a rag / sponge
1. Cut out the desired shape from the bottle.
2. Finish the edges with sandpaper.
3. Hang on the faucet.
4. How to make a plastic bottle bag
Photo instruction
Video instruction
5. What can be made from plastic bottles: cups for storing cosmetics
6. Plastic bottle feeder for a cat or dog
There are many ways to make bird feeders, but this bird feeder is designed for cats and dogs.
You will need:
2 large plastic bottles
Scissors
1. In the middle of one bottle, you need to make holes slightly larger than the neck of another bottle.
2. The second bottle must be cut in half across.
3. Fill the bottom with food.
4. Connect the parts and open the cover.
7. Vase for sweets: a master class crafts from plastic bottles
You will need:
Record, round plastic or thick cardboard
6 two-liter plastic bottles
Wooden or plastic rod (you can use an even branch of a suitable diameter and length)
Super glue
Spray paint and glitter (optional)
1. We make the basis for crafts. To do this, you need a plate, ceramic or glass plate. In the middle of the plate, you need to increase the hole to 10 mm with a drill.
2. The drill will also need to make holes in the center of the three plastic bottle pieces you will be using. It's easier to drill from the inside out.
3. Cut off the bottom of each of the 6 plastic bottles. Put 3 parts on the rod and secure with glue. Glue the remaining parts to the base (plate) around the rod. If desired, you can paint everything with spray paint.
It is worth noting that the rod is held on the base thanks to the plastic part, which is glued to the plate, as well as to the rod itself.
4. If you wish, you can decorate your vase.
8. DIY wicker baskets from plastic bottles (master class)
And here is a variant of a wicker basket made of plastic cocktail tubes:
9. Crafts for the garden from plastic bottles (photo): broom
1. Remove the label from the plastic bottle.
2. Use a utility knife to cut off the bottom of the bottle.
3. Start making cuts on the bottle, leaving 1 cm between each.
4. Cut off the neck of the bottle.
5. Repeat steps 1-4 for 3 more bottles. Leave one bottle with a neck.
6. Place all cut bottles without a neck on top of one bottle with a neck. You will get a blank for a broom.
7. Cut off the top of one bottle and put it on top of the resulting blank.
8. Make two holes through all the bottles and insert the wire into them and wrap the ends.
9. Insert a stick or rod into the neck and secure with a nail. You can also use glue.
Video instruction
10. Modular boxes: a description of crafts from plastic bottles
You will need:
Several large plastic bottles or canisters
Stationery knife
Scissors
Marker or pencil
Strong thread.
1. Use a utility knife and/or scissors to cut a suitable hole from a bottle or canister. It shouldn't be too small for everything to fit, or too big for the plastic structure to fall apart.
2. Start connecting the bottles with a strong thread. Start with two, then add two more already connected to them, and so on. Tie strong knots. You can also try using hot glue or super glue (Moment glue).
3. Assemble the design that is convenient for you. You decide how many rows and "floors" to make. However, it is worth knowing that the higher the design, the less stable it is. You may need to once again secure the entire structure with a rope.
4. It's time to clean up the scattered things on the shelf.
Many homeowners create all sorts of plastic bottle crafts to decorate their place of residence. You can create real works of art by spending a minimum of money.
Not only decor items are made of plastic, but even furniture. All you need is a knife, an awl and a little imagination.
In this article, we will analyze in detail how to make crafts from plastic bottles with your own hands.
We decorate the site
What only homemade products you won't see on household plots. There are flowers, animals, and trees. You can create beautiful sculptural compositions that will not only decorate the garden, but will also give a great mood.
Let's take a look at a couple of instructions for beginners that make it easy to create crafts from plastic bottles. It will be a palm tree and a pig.
bottle palm tree
To make a palm tree, you need to create a frame. Its length should be equal to the height of the tree.
Bottles of the same size are taken, the bottom is cut off from them and placed on top of each other. Then the leaves are cut out. They are attached to the top of the created structure. When everything is ready, the palm tree is painted green.
Funny pig from bottles
The piglet will look great anywhere in the garden. For its manufacture you will need:
- 5 l bottle;
- four bottle necks for making legs;
- one top of the bottle, which is cut in two to make the ears;
- tail wire;
- two beads for the eyes;
- glue;
- pink paint.
The parts are connected and fixed with glue. Ready product need to be painted. You can take oil or spray paint. To prevent the pig from being blown away by the wind, you need to pour sand into it.
In addition to the decorative function, the design can serve as a flower bed. To do this, the top is cut off, filled with earth and flowers are planted.
Crafts from plastic bottles for the garden can serve as flower beds, borders or paths. To make a path, bottles are inserted into the ground with a neck.
Both whole and cut plastic are used. It is important to fill the bottles with earth so that they do not deform when they are walked on.
The use of bottles in the household
Bottles are used for more than just decoration. From them you can make a scoop, a washbasin or a trap for a pest.
Undoubtedly, everyone will need a container for storing any items. To make it, just cut off the neck.
The washbasin is also very easy to do with your own hands. The bottom of the bottle is cut off, and holes are made through which the rope is threaded. The structure is hung in the right place and water is poured. To wash, just unscrew the cork a little.
To make a trap, you need to cut the container in half. To catch insects, some kind of bait is placed at the bottom. For example, sugar syrup with yeast is suitable for this.
It will take hot water in which sugar and yeast dissolve. The cooled liquid must be poured into the trap. Not only flies and wasps, but also mosquitoes will flock to this delicacy.
Note!
Even a child can make a scoop. First you need to outline its shape, and then cut it out.
Can be made from plastic flower pots, greenhouses or containers for seedlings. A description of such crafts from plastic bottles can be found on the Internet at in large numbers, but to create something unique, you need to show your imagination.
It is fashionable to build an automatic watering tool from plastic containers. To do this, cut the bottle, make holes on the sides and put the hose into the neck. With the help of such a device, the plants will be perfectly moistened.
For plants that do not like surface watering, the following device is made. The bottom of the plastic container is not completely cut off. A trench is torn to the side of the plant, where stones are laid. The bottle is instilled upside down.
Then pour the right amount of water to carry out watering. You can place bottles upside down, but in this case you will need to make holes in the container.
use plastic container and for plant heating. To do this, the bottles are filled warm water and put them around the plant.
Note!
For inspiration, see various photos crafts from plastic bottles. You do not need to make great efforts to make an original decoration or a useful little thing for your garden that will last for many years.
Photo of crafts from plastic bottles
Note!
The second option is very difficult to implement today, so recycling comes to the fore. Plastic can be given to special recycling plants, or you can make useful things out of it. In this collection, you will learn how to make various useful things for your home and garden from plastic bottles.
1. Do-it-yourself ottoman from plastic bottles step by step
You will need:
Plastic bottles
Foam rubber
Knitting needles
Ruler
Scissors
Sewing machine
1. Wash and dry several plastic bottles with caps on. Gather all the bottles in a circle and tape them together.
2. Cut out two circles from the cardboard so that they cover the top and bottom of all connected bottles. Tape these circles to the connected bottles with tape.
3. Prepare two rectangular pieces of foam rubber and one round piece. With rectangular pieces you need to cover the side of the collected bottles, and with a round piece the top. Secure everything with tape.
4. From any fabric, make a cover for your seat. If you like knitting, you can knit a cover.
2. We make a do-it-yourself faucet extension from plastic bottles
It will be more convenient for children to wash their hands.
3. Products from plastic bottles with your own hands: a pocket for a rag / sponge
1. Cut out the desired shape from the bottle.
2. Finish the edges with sandpaper.
3. Hang on the faucet.
4. How to make a plastic bottle bag
Photo instruction
Video instruction
5. What can be made from plastic bottles: cups for storing cosmetics
6. Plastic bottle feeder for a cat or dog
There are many ways to make bird feeders, but this bird feeder is designed for cats and dogs.
You will need:
2 large plastic bottles
Scissors
1. In the middle of one bottle, you need to make holes slightly larger than the neck of another bottle.
2. The second bottle must be cut in half across.
3. Fill the bottom with food.
4. Connect the parts and open the cover.
7. Vase for sweets: a master class crafts from plastic bottles
You will need:
Record, round plastic or thick cardboard
6 two-liter plastic bottles
Wooden or plastic rod (you can use an even branch of a suitable diameter and length)
Super glue
Spray paint and glitter (optional)
1. We make the basis for crafts. To do this, you need a plate, ceramic or glass plate. In the middle of the plate, you need to increase the hole to 10 mm with a drill.
2. The drill will also need to make holes in the center of the three plastic bottle pieces you will be using. It's easier to drill from the inside out.
3. Cut off the bottom of each of the 6 plastic bottles. Put 3 parts on the rod and secure with glue. Glue the remaining parts to the base (plate) around the rod. If desired, you can paint everything with spray paint.
It is worth noting that the rod is held on the base thanks to the plastic part, which is glued to the plate, as well as to the rod itself.
4. If you wish, you can decorate your vase.
8. DIY wicker baskets from plastic bottles (master class)
And here is a variant of a wicker basket made of plastic cocktail tubes:
9. Crafts for the garden from plastic bottles (photo): broom
1. Remove the label from the plastic bottle.
2. Use a utility knife to cut off the bottom of the bottle.
3. Start making cuts on the bottle, leaving 1 cm between each.
4. Cut off the neck of the bottle.
5. Repeat steps 1-4 for 3 more bottles. Leave one bottle with a neck.
6. Place all cut bottles without a neck on top of one bottle with a neck. You will get a blank for a broom.
7. Cut off the top of one bottle and put it on top of the resulting blank.
8. Make two holes through all the bottles and insert the wire into them and wrap the ends.
9. Insert a stick or rod into the neck and secure with a nail. You can also use glue.
Video instruction
10. Modular boxes: a description of crafts from plastic bottles
You will need:
Several large plastic bottles or canisters
Stationery knife
Scissors
Marker or pencil
Strong thread.
1. Use a utility knife and/or scissors to cut a suitable hole from a bottle or canister. It shouldn't be too small for everything to fit, or too big for the plastic structure to fall apart.
2. Start connecting the bottles with a strong thread. Start with two, then add two more already connected to them, and so on. Tie strong knots. You can also try using hot glue or super glue (Moment glue).
3. Assemble the design that is convenient for you. You decide how many rows and "floors" to make. However, it is worth knowing that the higher the design, the less stable it is. You may need to once again secure the entire structure with a rope.
4. It's time to clean up the scattered things on the shelf.
11. Do-it-yourself plastic bottle house (video)
12. How to make a house / greenhouse from plastic bottles with your own hands
1. Remove labels and wash bottles.
2. Cut off the bottom of each bottle and unscrew the caps.
3. Put the bottles on a long straight branch, stick or rod.
4. Make wooden frame house (greenhouse).
5. Repeat steps 1-3 for the required number of bottle rods. After that, all the rods must be attached to the frame of the house.
* Alternatively, you can simply connect the required number of bottles with a wire and attach the bottles assembled in a row to the frame of the house. In this case, no rod is needed and no need to remove the caps from the bottles.
* The greenhouse can be made more airtight by wrapping it with bubble wrap.
Video instruction
on 28.05.2017 148,088 Views
From plastic bottles you can make a lot of useful things for the garden and garden
Lovingly equipping the city dwelling, we are no less touching about our summer cottages. We try to ennoble them, create for ourselves comfortable conditions and add special notes of attractiveness to even rows of beds and berry bushes. Many summer residents have chosen the most affordable and flexible material for their creative experiments - ordinary plastic bottles. About what products can be made for the garden and cottages, we will talk further!
- house made of plastic bottles
- Country crafts from plastic bottles step by step: palm tree from plastic bottles
- Plastic crafts: some tips
- Master class from plastic bottles step by step
miraculous hanging pots for cacti from plastic bottles
Resourcefulness in ways to place many plants in the garden
Plastic bottles in skillful hands will be a wonderful decoration for your landscape
beautiful flower from plastic caps
Crafts from plastic bottles step by step: from a flower pot to a fabulous tower
Manufacturing idea useful gadgets and decorative things from plastic containers is not new. The first attempts led our grandparents to build low fences for paths. Assessing the plasticity and cheapness of the material, craftsmen from the people went further. And now summer cottages are decorated with full-fledged fences, funny figures and unusual devices made of plastic bottles.
A lovely ostrich from a pet container cannot fail to please your children!
Thanks to imagination and such excellent material as plastic bottles, we have almost limitless possibilities for creating crafts for every taste, any complexity and direction.
Pictures from caps of plastic bottles and other containers have grown into a whole art direction
Plastic bottles have long been in great demand among gardeners.
Gorgeous orange flowers from pet containers
Crafts and decorations for summer cottages and gardens from plastic bottles do not require application complex tools and specialized skills. The main thing is that there is time and desire, as well as enough material. Those who had both, convincingly proved the limitless possibilities of such needlework, and we have prepared a review best examples crafts.
Do-it-yourself furniture, flowerpots and a vase from a plastic bottle
Comfortable and very stylish chair made of plastic bottles
A sheet of plywood, sixteen one and a half liter bottles, adhesive tape - and a convenient and durable one will appear on your site. coffee table. Plywood can be replaced with plastic or hardboard, old countertops or plexiglass. From the same materials, slightly changing the design, you can make a garden bench. Some diligent and patient craftsmen manage to assemble full-fledged sofas and armchairs from bottles.
From plastic bottles, you can even make the basis for a full-fledged sofa, if you fasten them firmly and neatly.
Hanging flowerpot or base for planters
Do-it-yourself ottoman from plastic bottles
How to make a pouffe from a pet container
house made of plastic bottles
There are real builders among the summer residents who know that it is possible to build whatever your heart desires from plastic bottles. They collect gazebos, toilets, sheds and even from plastic bottles. The only difficulty of such structures is not in their assembly, but in the assembly required amount bottles.
House with a roof of 7,000 bottles
Plastic bottles are a good base material for building walls of a summer house, a greenhouse, a shower, a toilet or other partitions.
The walls of the greenhouse from containers on a wooden frame
The bottoms of plastic bottles will help to arrange garlands for the garden
Playground: flowers from plastic bottles and toys from plastic bottles
Crafts from plastic bottles will help decorate the playground
All kinds of crafts from plastic bottles are especially attractive for decorating a playground. Absolutely safe, they can become the basis for toys, and for fun decorations, and for creating plot compositions. Funny elephants, bees, hares and hedgehogs, bright flowers, cheerful lanterns will turn the countryside island of childhood into a fairy-tale kingdom.
A whole plot for a playground from caps of plastic bottles and canisters
From the caps of plastic bottles, together with children, you can make small crafts and large plot mosaics
plastic bottle doll
Examples of a variety of crafts that will help the gardener with placement, easy transportation and plant care
Piglets from large plastic bottles– stable stands for germinating seedlings or small plants
Craft for garden or lawn decor: pet container parrot
Crafts for the garden and useful little things
Multi-colored turtles will be a great decor element for your garden.
With what ease the "crazy" hands of summer residents turn used plastic containers into useful summer cottages, you can see by walking along suburban areas. Here, on the trunk of a tree, a washstand was comfortably attached, and in the next courtyard, a gazebo was decorated with multi-colored geraniums with fragrant and ampelous ones. We have also prepared for you several descriptions of crafts from plastic bottles for the garden.
Do-it-yourself bird from plastic bottles
DIY painted garden owl lanterns
Birdhouse from a plastic bottle
It is very easy to make a birdhouse from a plastic bottle
Cut in half plastic bottles will become pretty flower pots, it is important to paint them carefully. It is also advisable to take opaque bottles for this.
The ever-tangled and stuck twine for tying seedlings will stop tormenting you if you hide the ball in a plastic bottle. Just cut the bottle in the middle, put a ball in the top, pass the end of the twine through the neck, connect the parts, secure the cut with tape - and the comfortable storage is ready.
Drip irrigation from plastic bottles
Your seedlings will not wither, even if you are away for a few days: install semi-automatic watering. Once again, plastic bottles come into play. We cut off the bottom of the bottle, about 2/3, drill 4-8 holes in the cork, close the neck, bury the bottle upside down, pour water - and the seedlings are provided with moisture during your absence. A similar garden made of plastic bottles (photo confirms this) will significantly save your time and money.
Automatic watering "Aquasolo" - these are conical nozzles for a threaded bottle that do not require time-consuming drilling of slots, digging into the ground, and so on
Anthurium with convenient system automatic watering Aquasolo
Maximum and space saving: plastic bottles suspended one above the other with a notched tube of water passing through them
- For the same seedlings, plastic bottles make excellent containers. After cutting the bottle in half and taking the bottom, pour the prepared substrate into it, plant the plants and place them on a bookcase made of wooden planks. This design is also suitable for decorating a house with flowers.
Beautiful hanging pots made of plastic bottles will not only decorate the interior, but also make it unique.
Great flowerpot from a shampoo bottle with your own hands
Arrangement in the country of compact placement of seedlings or small plants
Bird feeder from a plastic bottle
Some crafts from plastic bottles for the garden amaze with the ingenuity of the owners. By putting a bottle on a hose and making many holes in the bottom, you will get a wonderful diffuser for watering the garden. From a five-liter container, you can build an elegant lamp on the veranda, and a mineral water container is suitable as a bird feeder.
Plastic bird feeder
Simple and handy hose spreader for garden watering
- Plastic bottles will help you save trees from pests. Cut the bottle lengthwise into two halves, fill it with a mixture of insecticides that is attractive to pests and dig at the base of the trunk.
- From bottles you can make a magnificent decorative all-weather and all-season flower bed. Just paint the bottoms of the bottles in different colors and make a wonderful carpet out of them by sticking them in open side into the ground. The carpet pattern can be pre-reproduced on paper.
Making flower beds with pet containers has become very popular
- One Brazilian engineer made calculations and built a solar collector from plastic bottles. The design can be placed on a summer cottage, connected to storage tank and you will always have a warm shower.
Device solar collector from plastic bottles
Automatic watering of seedlings and ornamental plants in your absence with the help of a plastic bottle dug near the roots with small holes drilled in the neck or cap
Cut plastic containers suspended one above the other are the fastest and most economical way out of a situation where you need to germinate a lot of seedlings in a limited space
Making an owl from a plastic bottle with your own hands
Bottles for sprouting and overwintering plants - an opportunity to save space and provide good irrigation and drainage
Products from plastic bottles: artistic masterpieces
Gorgeous dandelions from pet containers will never cease to delight you and your guests
The fantasy of folk craftsmen is so diverse that it leads to the appearance on summer cottages and outlandish animals, and characters of fairy tales and cartoons, and exotic plants, and original thematic compositions.
We paste over the bottom of a plastic bottle or cup with dry twigs and get an unusual candlestick, protected from wind blows
Rainbow decor of the garden, workshop, garage: a fountain of spirals cut from multi-colored plastic bottles
Plastic bottles are used not only to decorate the garden, but also to decorate the home.
Country crafts from plastic bottles:
If you have a small pond on your site, you can decorate it with a plastic palm tree. It's not at all difficult to make it. You will need:
- 10-15 brown plastic bottles (for a palm tree trunk);
- 5-6 green bottles (it is desirable that they are long);
- iron or willow rod;
- an awl or drill for making holes;
- sharp knife or scissors for cutting bottles.
A palm tree made of plastic bottles looks very beautiful
Now let's start making jewelry.
- Cut all brown bottles in half. We take the lower parts and make holes in the bottom of each of them with an awl, equal in size to the diameter of the rod.
Advice! You can take the tops of the bottles, then you do not have to make additional holes.
- We cut off the bottom of the green bottles by about 1 cm. We leave one of the blanks with a neck, cut it off for the rest to make a loop.
- Carefully cut the green bottles lengthwise into three equal parts to the very loop.
Making palm leaves
- We cut the edges of the brown parts with cloves to create an imitation of a rough palm tree trunk.
- We securely fix the rod in the soil. We calculate the length of the rod by laying out the brown details on the ground in one row, plus 2-3 cm on the leaves.
We put brown bottles on it. 
Making a trunk for a palm tree
- We string our leaves on the free top of the rod, completing the work with a blank with a neck. We make a hole in the lid and screw it onto the last sheet, securely fixing the entire crown.
Combination of stem and leaves
Assembling a palm tree from plastic bottles
Using several rods of different lengths, you can create a real oasis. As you can see, it’s not so difficult to make crafts for a garden from plastic bottles with your own hands, the main thing is to find enough material and take one of the proposed ideas as a basis.
Step-by-step guide: make fabric pots on the basis of plastic bottles.
Hedgehog from a plastic bottle and a twine rope: we grow seedlings and small creeping plants
Crafts for giving from caps from plastic bottles
From plastic covers you can create real masterpieces
Don't throw away bottle caps. decorative crafts from caps from plastic bottles for summer cottages and gardens, you can also beautifully fit into its landscape. They will serve as an excellent mosaic material for decorating fences and walls of a country house.
Bright compositions made of plastic caps will help to make your landscape design more fun
Master class video (from plastic bottles of standard capacity):
A walkway made of plastic covers is not only economical, but also very beautiful.
Large-scale red and blue mosaic of caps of different sizes
Having conjured a little with the pattern, painted and drilled holes in the sides of the covers, you can use them to assemble a curtain on the door. The perfect insect repellant!
The lids can be turned into a beautiful tabletop or a practical doormat. Use them for decorative finishes inner space.
Gorgeous door curtains made from plastic covers
Carport that diffuses sunlight
Beautiful Hawaiian style lanterns
Before starting work, remove the labels from the bottles and wash the container thoroughly.
For the stability of vertical structures, fill the bottles with sand or small pebbles.
Dragonflies from corrugated plastic bottles
Ingenious device for collecting fruits from trees
Hanging pots from pet containers with the image of animals will perfectly fit into the interior of a children's room
Choose bottles of different softness for crafts. For example, for the body of a dog or elephant, take a strong base, and for the ears it is better to use softer plastic.
Master class from plastic bottles (step by step):
