Couldn't find a detailed one :(
Night lights from Christmas garlands
You need a wire, you need to spread the garland on the table into branches (well, count how many light bulbs you need for 1 branch)
then make twigs from wire, weave a garland into them, hiding the wire in the wire. wrap a wire in a wire .. well, you can wrap a couple of wires in length along with the wire (so that the branch does not stretch)
such a circle of wire with twigs hanging on it should also remain with a cord with a plug - all this (except for the cord with a plug) will need to be hidden in the trunk.
then collect the branches into the trunk, hiding the remaining extra wires in the trunk.
then decorate the wire with corrugated paper (or foil, or whatever you like) (well, how to make a bark)
and you can put the tree on the table and plug it into the outlet.
just don’t forget to make the roots wider (otherwise it won’t stand) well, or plant a tree in a pot ..
I think it can also be done on a frame ... it’s normal for a Christmas tree that the paws go down, but if you make a pine tree or a cedar .. you can immediately make a tree frame from a hard wire and screw light bulbs to it.
twigs can be done in different ways (location of light bulbs).
Stand - tin can with a hole, inverted. a barrel is inserted there and everything inside is tightly packed with newspaper. bottom circle of cardboard glued
By the way, I looked at the Christmas tree and thought that you can close up the branches with dark green tinsel .. it will turn out not very shiny, but fluffy. It will be possible to use not on holidays and further)
And yet, a friend says she decorated branches and trunks with masking tape, then painted with gouache and varnish. I will also take a picture of her tree, as soon as I get a new camera for myself. she screwed it to the stones (instead of a stand)
Unfortunately, I don't have a camera so I can't show it :(
I can only show how to make a Christmas tree nightlight (beginning) the rest of the pictures are lost: (do not judge strictly, it was done in the country for 2 hours, so that the hands remember))
Currently, there is a huge range of decorative lighting products that are successfully used for decorating rooms and streets. LED trees are becoming especially popular. various types, which serve not only as a decoration, but also perfectly complement the illumination of buildings with adjacent territories. Due to their qualities, they fit perfectly into almost any interior. In the daytime, artificial trees look quite natural, and with the onset of darkness they begin to delight others with all the colors and shades.
Available for sale a large number of finished products, however, if you wish, you can make an LED tree with your own hands. Important positive factor is low energy consumption, so such trees are increasingly used for decoration in offices, shops and restaurants, attracting the attention of potential customers.
LED tree for house or apartment
Most often, when self-manufacturing LED trees for indoor installation, two main methods are used.
Tree with LED garland
The manufacturing process starts with a frame, for which aluminum wire is best suited. It can be easily bent at any angle, giving the future design any configuration. A more realistic color is obtained by wrapping the white insulation of the wire with black electrical tape.
Then, the finished frame is evenly wrapped with a garland, fixed to the wire with black electrical tape. If desired, you can create additional decorations for LEDs in the form of decorative nozzles made of transparent plastic. Upon completion of the work, the manufactured tree just needs to be connected to electrical network and believe it works. Thus, the question of how to make an LED tree with your own hands can be considered resolved.
The main advantage of this method is the ease of manufacture. The main disadvantage is the impossibility of making wood large sizes. This is due to the standard length of the garland, which is not enough to fit the entire tree. Therefore, this method is most suitable for the manufacture of miniature products, which are also very popular.
LED tree
Making a tree from individual LEDs is considered a more labor intensive process. However, this method does not have the disadvantages inherent in ready-made garlands, which makes it possible to manufacture structures of any shape and size. The main material is 5mm LEDs. Resistors are needed to equalize the voltage.
Direct manufacturing begins with soldering. The LED contacts have different lengths, so the legs of the resistors are pre-shortened on one side. You need to solder the contacts of both elements very quickly so as not to damage the LED.
Heat shrink tubing is then cut for the wires to cover solder points and resistors. It is necessary to leave a place for soldering the power wire. The tube is inserted onto the leg of the resistor and warmed up a little with a lighter to give the insulation the necessary shape. This operation is performed for each LED.
After that, you can start making the tree itself. Most often, the trunk is made of thin plumbing pipes, and the branches are made of wire, about 50 cm long. 45 cm is left for the main part of the branch, and 5 cm remains for attaching it to the trunk. Small branches are cut up to 10 cm in size. The number of LEDs on one branch must be calculated in advance.
At the next stage, small branches are taped to large branches with electrical tape. The number of LEDs on each small branch is recommended to be equal to the number of LEDs on the large branch. Each LED is fastened with electrical tape.
The wires must be stretched along the entire length of the main branches, after which they are cut off taking into account the bends of small branches. The ends are wound to the trunk, after which all the pluses and minuses are connected on each branch. Their number must match the total number of branches. The wire connections are insulated. It remains only to evenly hang decorative ornaments and connect the finished tree to the electrical network.
Outdoor LED Trees
Artificial trees with LEDs can be installed in any place as a decoration of the landscape and surrounding areas. attractive force beauty actively attracts visitors to restaurants and cafes, shopping centers and boutiques, offices and other public places. Each luminous tree in its configuration largely resembles real plants, and sometimes completely imitates them. Artificial bark is used to cover metal branches. The maximum similarity can be achieved thanks to silicone or plastic leaves and life-size flowers.
The entire structure of the artificial tree is decorated with multi-colored LEDs. Most often they work from the mains, but in some cases it can be used autonomous power supply, which leads to some increase in the cost of the design. Sometimes used led garlands, however, they do not give the same effect as LEDs used alone.
Advantages artificial trees with LEDs:
- Long service life of at least 5 years.
- Artificial structures do not require the maintenance required by real trees.
- Low power consumption. Even the most big trees consume electricity in an amount not exceeding 700 watts.
- The simplicity of the design allows you to install it yourself, without involving specialists.
- Design resistance to low temperatures, dust, high humidity and other negative impacts.
- In the event of a burnout of one or more LEDs, the rest of the chain will continue to work, and faulty elements are easily replaced by others.
- Right choice artificial trees and bushes allows you to emphasize and complement the elements.
Sakura is especially popular among LED plants. These trees are particularly beautiful due to the highly durable plastic or aluminum alloy. Their appearance is as close as possible to the present. Despite the relatively small size, this tree gives as much light as taller structures. Sakura has a soft and delicate light range, predominantly white, pink and golden tones.
Self-made tree for the street
When making a tree with LEDs for outdoor use, it is imperative to take into account the aggressive influence of the environment. Therefore, before you start making a do-it-yourself LED tree for the street, you need to determine in advance the entire procedure.
The general scheme of work will be approximately the same as for conventional structures intended for premises. IN street version it is recommended to pay attention to a more thorough covering of the trunk and branches with quality materials.
It is also necessary to take care of good insulation of the LEDs after soldering them with resistors. The heat shrink tubing should completely hide each pair. If necessary, all unreliable places can be additionally insulated with black electrical tape. The same goes for wire connections at the plus and minus points. Decor items should be fixed more efficiently so that they are not torn off by strong gusts of wind.
Master class: do-it-yourself luminous tree
The desire to decorate your house or apartment is familiar to all happy owners of real estate, as well as to those who have to live in a rented room. Modern manufacturers of various decorative fixtures are racing to meet the growing demand, offering novelty after novelty and creating the most unimaginable combinations of styles and technologies.
Some of them perform a purely aesthetic function, others combine attractiveness. appearance with functionality. Glowing trees made of polymeric materials and equipped with a large number of small ones can be attributed to such useful decorations. This decor is able to perfectly illuminate part of the room.
Naturally, the brightness of such a lamp cannot compete with full-fledged lighting; rather, it is designed to replace lit candles or a night light.
What is LED Lighting
The dynamically developing production of LED lighting devices is confidently replacing traditional incandescent lamps, conquering the market with numerous advantages:
- Exceptional durability.
- High quality lighting (brightness).
- Safety.
- Economical power consumption.
- Environmental friendliness.
- Resistant to humidity and temperature extremes.
The essence of the work of lamps is the release of light by a semiconductor material under the influence of the movement of electrons. The manufacture of such devices does not require phosphorus, mercury or other dangerous substances. And during operation, burns are excluded, and since the lamps do not heat up and consume a negligible amount of electricity (5-9 watts).
What do LED trees look like?
The lion's share of the popularity of LED lamps can be attributed to their attractive appearance.
Luminous trees, whose branches are dotted with numerous sparkling lights, decorated with flowers, berries or other decor, evoke only the most pleasant associations with fabulous landscapes and fantasy films. In addition, the owners of some devices have the opportunity to change the color of the shining lights, turn on the flashing mode, or get a design whose lamps play in several colors.
Depending on the purpose of the lamp and the style of the room or landscape, there are trees completely without decor. Their lamps are not hidden by flower attachments, and the trunk is made with a minimum of unnecessary elements, which will perfectly fit into a high-tech interior.
Types of LED Trees
When thinking about how to decorate your home or territory with a tree-shaped LED lamp, you should collect information about devices of this kind in advance.
Trees LED can be the most different sizes and types:
Some of these lamps can be purchased in full ready-made, others need assembly and connection. For amateurs, there is an opportunity, in addition to buying a factory product, to make a similar device on their own.
Glowing trees: price and equipment
Of course, in order to get a complete picture, illustrating the equipment of an interior or landscape with a bright LED tree, one cannot do without indicating the prices for such devices.
For fans of traditional shopping who prefer supermarkets, purchasing a lamp will cost a little more than buying it in an online store or making it yourself. On the other hand, they will have access to such benefits of civilization as professional advice, salesman's advice, home delivery and qualified installation.
Summarizing the cost offered by several major manufacturers, you can specify the following prices:
The price of a finished lamp or garland with lamps is also affected by the color of the LEDs. Blue, white and yellow lamps are considered more expensive.
Owners of "golden hands" will be able to save money by purchasing individual components, as well as self-manufacturing and installation of LED lamps.
Creating an LED tree at home
With even minimal knowledge in the field of electronics, you can quickly make a luminous tree with your own hands. Although it will take some effort to select, buy and connect components, even the most demanding hand makers will be satisfied with the result.
There are two ways to create such a decoration:
- Assemble luminous trees from the prepared elements (stable base, frame, ribbon with diodes and decorative flowers).
- Solder your own electronic design using separate LED bulbs, wires and insulation.
The first method is much simpler and faster. It does not require the use of skills in working with a soldering iron and electrical circuits, since you just need to connect the prepared device nodes in a certain order. Here creativity is manifested in the choice colors future wood and in a unique combination of prefabricated elements.
Choosing the second method and completely creating a luminous tree with his own hands, the master sequentially performs the following stages of work:
- Assembles the frame (pipes of different diameters, wire, wooden bases are suitable for this).
- Solder to wires LED lamps resistors and provides isolation of connection points.
- Attaches LEDs to branches.
- Brings out the wires to the power supply and fastens them by soldering (using tin as well).
- Fixes the frame of a tree with lamps on branches on a stable horizontal base.
When doing this work, you need to carefully monitor the observance of the correct polarity (+/-).
Decorating trees with LEDs
Luminous trees for the street look great as a single decor or as an element of a bright composition (decorated alley, garden, house).
One of the main advantages of lamps is their resistance to mechanical damage and exposure to aggressive weather conditions. That is why they are so often used to decorate household plots or areas near offices and shops.
The desire of a person to surround himself with comfortable and functional things is understandable and logical. Everyone wants to live in a good house or apartment, work in a well-furnished office. But for many this is not enough. I want beauty, celebration, emotions. Bright LED trees were created for such connoisseurs of beauty in environment and setting.
What are LED Trees?
The design of the LED tree includes the following elements:
Imitating the shape of a tree or a bush, a frame made of a special light-alloy material, which is enclosed in a plastic shell.
Decorative elements, which are LED garlands with silicone nozzles stylized as leaves and flowers.
The products are supplied with a 24V transformer.
These decorative lighting structures are quick and easy to install. They can have any color, size and appearance - from a small bush to a "giant" with a chic crown. Twisted with a large number of sparkling light bulbs, LED trees are very similar to real ones. They almost always become the central figure of the interior, adjoining territory or landscape.
What are glowing trees for?
The use of this type of lighting technology makes it possible not only to solve lighting problems, but to embody a large number of decorating ideas. With their help, an amazingly magical festive atmosphere is easily created. The alley of luminous trees seems to be calling to a fairy tale, causing delight, surprise and anticipation of a miracle even among adults.
If you install a glowing tree in your office or store, it will surely increase the accommodating of customers and the willingness of buyers to make a purchase. After all, the atmosphere of the holiday always gives joy, and a pleasantly excited person more easily agrees with the proposal made to him.
The most commonly used LED trees are:
In decorative lighting of landscapes, territories and interiors;
To create bright light alleys,
When making an entrance to a restaurant, hotel, shopping mall, shop.
Very popular LED trees as christmas decoration apartment, house or garden. They give a great mood to everyone who looks at them.
Features of this type of festive lighting
Unlike "live" light trees do not require care or attention. Because LEDs are very long term service (measured in tens of thousands of hours), after the acquisition, you can not worry that the tree will soon fail.
Decorative luminous trees are not afraid of frost or heat, they are not afraid of rain, dew, hoarfrost. Even if one or more elements fail, the structure will not stop shining.
When buying, the main thing is to decide on the type of LED tree that is suitable for your purposes.
To decorate the office table, you can purchase a glowing cactus with a small number of small LEDs. It is better to decorate a large area with a tree a few meters high, of impressive size, which includes a huge number of LED bulbs. To create a light alley, low trees with a soft purple or blue glow are suitable.
How to make a choice?
When choosing LED trees, the following matters:
Manufacturer.
Brightness and power of LEDs.
Frame material (most often, it is aluminum or steel).
The method of fixing the tree at the installation site.
Type of power supply (autonomous or from the mains).
A variety of colors and crown shapes of LED trees creates a lot of opportunities to draw attention to the building, territory, interior. If you want to decorate your office for a holiday quickly and in an original way, decorate a garden or attract visitors to a store or entertainment center, the best option than LED trees, do not come up with.
Margarita Sukach,
Tree lighting is one of the most popular techniques. landscape design. It simultaneously brings aesthetic pleasure and allows you to illuminate the backyard area in the dark. There are several methods for lighting vegetation: using lamps and spotlights located on the ground, fixing LED garlands on trunks, and creating LED trees. How to make an LED tree with your own hands, and we'll talk further.
How to use the backlight correctly?
Depending on what result you want to get from illuminating trees, one or another method of illumination is chosen. In order for the luminous trees for the street to look beautiful, you must follow a few basic rules:
spotlights are best placed on the ground at some distance from the tree under a slight slope;
Multiple spotlights can be used at the same time different kind lighting: halogen and LED;
for not too tall trees and bushes, lamps screwed into the ground are perfect, which can also be moved from place to place;
lamps can also be installed on a tree trunk, directing the light upwards - this will allow the light to scatter between the foliage;
creating a luminous tree with your own hands, you need to take into account the density of foliage, the height and diameter of the plant, as well as its shape;
for top lighting, halogen or LED lights installed on nearby buildings;
in order for the plantings to cast a shadow on a vertical surface, the spotlights behind them are installed at a great distance.
The use of LED garlands
If you want to create an LED tree with your own hands from an existing plant, then you just need to attach LED garlands to it, which are connected to the electrical network. Such garlands are divided into fruits that look like large lanterns, which are located far from each other, and leaves - small bulbs, located very densely (see photo). Presented LED lights trees has a lot of advantages, which include efficiency, long service life, resistance to low and high temperatures, precipitation. Trees with its help can be made both monophonic and multi-colored.
Self-creation
And now let's look at how to make street LED trees from scratch. First of all, I would like to note that luminous plants can be very diverse. This is an LED sakura tree, palm tree, maple, and a variety of spruce and pine trees. So, the stages of work on the creation glowing tree look like this:
tree diagram
First of all, the future plant must be drawn on a piece of paper, where you also need to indicate its height, diameter, length and number of branches.
Creation of the trunk
The tree trunk is created very simply - just take a metal-plastic pipe and cut it to the desired height (see photo).
Frame erection
From wire of different thicknesses, it is necessary to cut the required number of thick, medium and thin branches, and the latter should be as large as possible. All branches for ease of installation are bent in the shape of the letter "L" and attached to the trunk.
Working with LEDs
Resistors are soldered to the LEDs, after which they are isolated. For this, electrical tape and a tube of approximately the same shade are taken. The diameter of the tube should be such that the LEDs fit into it without problems. Each such element is attached electrical wire. Next, the LEDs are attached to the branches of the tree. In this case, the wires from smaller branches should be connected into a bundle and connected to the wires of thicker branches. As a result, all available wires are soldered in the main wire and run inside metal-plastic pipe. And don't forget to isolate them.
Twig decoration
In order for the luminous LED trees to look as natural as possible, leaves and flowers are cut out of plastic and taped to the branches with electrical tape, and the tree trunk is completely wrapped with brown electrical tape, as, for example, in the photo.
Tree installation
In order for the luminous plants to be stable, they are placed in a barrel, beautiful pot or any other container hidden in the ground. And in order for them to begin to please the eye, it is enough to connect them to the electrical network.
For more detailed information on how to make LED trees with your own hands, see the video below.
