Novo-Peredelkino, Nekrasovka, Mitino, Cheryomushki, Orekhovo, Maryino, Northern and Southern Butovo and other areas of Moscow, as well as Krasnogorsk, Odintsovo, Balashikha and others - where P-44, P-44T are, WE are there!
The loggia in houses of the P44 series (and their modifications) is:
- wall of a niche with a protruding crossbar (support for the upper balcony slab),
- trapezoidal niche,
- triangular niche,
- narrowing of the space towards the rear wall.
3-room apartments, 2-room “vest” apartments.
Loggia with a trapezoidal niche
(popular name "balcony boot").
Installation of roller shutters in a closet with the frame inside.
Features of the built-in wardrobe from the SVETLOGORY company for the trapezoidal niche of the loggia of the P44, P44-T series house.
1. INCREASED LIGHT OPENING AND USEFUL DEPTH OF THE CABINET.
The cabinet front is moved forward by the size of the box or more, which allows you to increase the clear width of the facade by 20-25 cm. This design was developed by the SVETLOGORY company in 2014. For comparison, when installing roller shutters directly into a loggia niche, the distance between the guides is about 39cm!
When the facade is moved forward, not only the clearance increases, but also the depth of the cabinet. This creates space for storing tall objects: stepladders, skis, snowboards, etc.
2. SINGLE SIDE WALL.
There are no joining seams at the side wall in the window sill area.
3. USE OF MOISTURE-RESISTANT MATERIALS.
The interior space of the niche is located in the cold zone of the loggia. The moisture-resistant materials used during installation are resistant to temperature changes and high humidity.
Roller shutters are equipped with a belt drive, which greatly simplifies their operation.
Installation of roller shutters in a niche in the loggia of a house P44 (“boot balcony”) without internal filling.
The ease of use of roller shutters on loggias is that the curtain lifts upward. This allows you to install the cabinet in a narrow place, as in this case on the loggia of house P44.
One of the options for installing a cabinet with roller shutters in P44T
Covering a niche (diagonally) from the bay window of the loggia glazing to the wall of the house. There are technical limitations.
One-room apartments, 2-room apartments (linear). A narrow loggia with a protruding crossbar.
The loggia niche has a ledge (crossbar).
The shape of the loggias in one-room and linear apartments of houses P44, P44T is narrow, the usable area is limited.
A wardrobe with roller shutters is installed in the wide part of this loggia. The internal shelves are cut to the shape of the protruding crossbar.
In the narrow part, either a cabinet or a narrow cabinet is installed.
Given their elongated shape, such loggias are usually glazed with “cold” aluminum sliding glazing. Such glazing practically does not retain heat, and, therefore, condensation is possible. In this case optimal material for assembling the cabinet - not laminated chipboard, but PVC.
Cabinet in a trapezoidal niche.
If a hinged window is installed in a niche, then a cabinet is the best option.
- We will give you the exact dimensions: walls, ceiling, floor of this loggia.
- We will provide drawings showing the area of each part of the balcony.
- We'll tell you about the exact dimensions of the balcony block and glazing.
Photo Boot P44T
These boots are found in different houses. For example, in houses of the P-44 series, P-44T and P-44P, P-44M series. Loggias in old houses and in new buildings differ by 3–7 cm.
This loggia has many features. In most cases, the parapet here is concrete. Less commonly, the parapet is welded from metal corners.
Boat borders on Boot. Here, there is no solid wall to the neighbor - there is emptiness under the L-shaped beam. With the opposite wall, everything is also not easy. If there is a loggia in the middle of the house, then there is none at all (they install a partition made of hardboard). If the boot stands on the edge of the house, then in this place there is a full-fledged concrete wall.
In the houses of this series, the Boat is adjacent to the Boot. There is also a loggia called Klondike. There is also the so-called Big Boot. It is found in houses of another series. And it is similar in shape to this loggia - although significantly larger in size.You can click on the icon and go to the page of another balcony.
Balcony plan (scan) with dimensions in real proportions
For you, People's Windows made a drawing in real proportions. Such scans are usually used by surveyors. Here are the dimensions of the walls, floor, and ceiling. These measurements are internal. Everything is in millimeters - as in the drawings. The information is ours and has been collected over the years of work.
This loggia can be classified as average. Its dimensions are width 3202 mm, height 2637 mm, depth 2068 mm.
Dimensions façade wall 3202 mm by 2637 mm. The width of the slope part is about 9 cm. There is a moderate threshold of 157 mm. Therefore, when the floor rises slightly, it does not interfere at all.
The right wall is wide; its height is 2637 mm, width 2068 mm. For some reason, this wall does not go all the way. Therefore, when installing glazing frames, it is advisable to install foam block masonry in this place.
The left wall is 2637 mm high, 1124 mm wide. There is a hardboard partition here. It is advisable not to touch it, but put a foam block wall next to it. Customers often save money and then build a wall from plywood and timber.
The parapet of these Boots is 1070 mm high. It consists of 3 parts. Its main part has a length of 2413 mm, the middle part is 1008 mm, and the narrow toe is 434 mm. Due to the narrow toe, it is difficult to work here. Check the installers at this location.p>
The floor and ceiling are shaped like a boot. Its length is 3202 mm, width 2068 mm. The floor takes on a complex 6-shape. The floor area of this Boot is 4.18 m2.
The total area of all walls is 16.68 m2.
The area of the ceiling and floor is equal to 4.18 m2.
Dimensions of the window unit (window + door)
The dimensions of the balcony block are shown below in real proportion. These dimensions may vary slightly. As a rule, measurers choose numbers larger than those on the drawing by 50 mm.
The door dimensions are 2200 mm in height and 630 mm in width. The window dimensions are 1397 mm high and 1521 mm wide.
The area of the balcony block is 3.51 m2. Of these, the window surface is 2.12 m2, the door surface is 1.39 m2.
Glazing dimensions for Boot p44t
The glazing of the Boot consists of 3 parts. Its height is 1567 mm. The width of the wide part is 2413 mm. The width of the middle part is 1008 mm. And the narrow part is 434 mm.
This is not the cheapest glazing. Here we need bay windows and extensions. Three doors are made along the wide part. It is better to make the one closest to the wall blank from a sandwich. Then you can put a closet here.
Be sure to make the middle part hinged - otherwise you won’t be able to wash it. I advise you to suppress your nose with a sandwich. It won't take much light away. By the way, you can put it in this part - follow the link. Then cover both extreme parts of the glazing with sandwiches.
The total glazing area is 6.04 m2.
September 12, 2016Specialization: master of internal and exterior decoration(plaster, putty, tiles, drywall, lining, laminate and so on). In addition, plumbing, heating, electrical, conventional cladding and balcony extensions. That is, renovations in an apartment or house were done on a turnkey basis with all necessary types works
The glazing of balconies p44t is technically no different from the same devices in conventional houses - the configuration just changes slightly. I’ll say right away, so as not to delay - according to the standard, they can be 3.8 m2, or 4.8 m2 (boot) and with the same area ordinary, but somewhat expanded balconies are made. Therefore, I suggest you familiarize yourself with the conditions of the front and interior decoration, insulation, glazing, and also watch the video in this article.
Balcony cladding
Getting to know the standards
First, let's get acquainted with the "pawns":
- the P-44 series or “pawn”, as it is popularly called, was designed in the late 1970s, and entered production at DSK-1 in 1978;
- This panel houses, which may have a slightly different modification, for example, p44t, p44k and others - most of these buildings as legacies of the Soviet Union can be found in Moscow, but they are found throughout Russia and Ukraine;
- this series, unlike, for example, 1605, had no evolutions - this was fundamental new development, which justified itself well;
- it is noteworthy that the design of these houses differed from other buildings - these are the increased sizes of kitchens and balconies, which never happened in the USSR;
- another feature of such houses is that in the early 1980s they began to be built in most cities of the Moscow region as an alternative to Brezhnevka;
- they were erected until 2000, and in Moscow alone about 1,200 buildings of this series were built, although in different time they differed in colors;
- if we talk specifically about the p44t series, then it was a development of the 1990s - the apartment layout was improved there, thanks to the ventilation duct being moved to the corridor, and the square footage of the kitchens and fire safety conditions also increased;
- Currently, the decoration of the buildings has changed greatly - from white and blue it became red, orange and brick, and archers also appeared;
- Since 1997, mass construction of the p44t series began, which continues to this day and this moment About 600 of them were built in Moscow alone.
Construction of the p44 series
Glazing or installation of windows
I want to say that it is difficult for me to determine the name of this premises on p44t - the instructions in different situations can call it either a balcony or a loggia. I can only affirm that, by the standard definition, a loggia is a built-in part of a building, and a balcony (from the word “beam”) implies an extension outside the house and is open on three sides.
To glaze a balcony in a P44T series house, you don’t have to make the windows yourself - that’s simply unnecessary. It is much easier to order them from any manufacturer.
Of course, you can do the installation yourself - this will reduce the price of windows by at least 10%, and if you can do it, then that’s great! To order, you can purchase metal-plastic (PVC), aluminum, wood-plastic and wood-aluminum frames with single, double, triple and quadruple glazing (with or without filler).
There is one peculiarity here - the frames for glazing p44t loggias cannot be straight, since the configuration of the balcony itself is broken, therefore, the windows will follow its contour. This means that if you want to do the installation yourself, then you need to immediately agree with the measurers and/or window manufacturers that between the transoms at the turns there will be not a square profile for right angles, but an impost.
The presence of an impost allows you to break the contour to any angle you need, therefore, turning a boot or boat will be no problem for you.
Next, the size of the windows must correspond to the installation niche. That is, you will need an allowance for blowing in with foam, but it should be no more than 10-15 mm on each side. If measurers or installers say that this requires a greater distance, then they are simply not professional workers.
I have encountered this more than once, and I know that the sizes are reduced to ensure that the diagonals do not match. Remember, diagonals are easily checked with a tape measure, therefore, you can always determine whether the opening has right angles!
If you are thinking about how to glaze such a balcony yourself, then you should take into account that after installing the frame along its perimeter there will be polyurethane foam, which will need to be closed with something and somehow.
For this purpose, profiles from the category are usually used plastic slopes, although it could also be plastic trim. They are most often mounted on self-tapping screws, but I still advise attaching them with glue - the most common composition for this is “liquid nails”.
It is best to do the interior decoration of the loggia only after installing the windows - this way you can cover the perimeter where the mounting foam is visible.
Let's move on to insulation and interior decoration
Now about how to properly insulate a p44t loggia. The same instructions apply here that apply to ordinary rooms with mineral walls, ceilings and floors.
You don’t have to somehow lay the insulation between the profiles - you can simply glue it or screw it with dowels to the rough surface. I will only say that a combination with a room or an office made on the balcony definitely needs insulation.
For insulation, you can use any type of mineral wool (glass, stone or slag), polystyrene foam or extruded polystyrene foam (the latter option is more expensive, but much more effective). If you use foam or extrusion, you can get by decorative plaster or putty.
But with mineral wool It’s already more difficult. Here, in any case, we need some frame finishing type of drywall, plastic panels or wooden.
Combination with the room - tiles and laminate on the floor
For the floor, you can use any coating that you use in your apartment:
- ceramic tiles,
- laminate,
- carpet,
- boardwalk and so on.
The most important thing here is that the coating meets your needs and, of course, is not very cold. In the photo of the combined balcony you also see heating radiators - they must be installed, if you want to get a full room.
Conclusion
Finally, one more tip - it is advisable to finish the balcony in the warm season - this way glazing (installation of windows) will be most effective. You might also want to give some advice - do so in the comments.
A plus is the presence of a balcony or loggia in the apartment. If glazed, they can be used as extra room or a place to relax. This will not be superfluous, since modern apartments small in size. Previously, owners of apartments with a loggia or balcony could not obtain reliable heat and sound insulation.
With the advent metal-plastic windows You can glaze a balcony or loggia without any problems. Loggias and balconies in houses of types p 44 and p 44t have their own design features, so glazing here occurs differently than in other houses.
In the houses of the n series, 44 apartments are equipped with loggias and balconies. The loggia is not small - its area is 4.5 square meters. m. The balcony here is smaller - 3 sq. m. m. From this it follows that residents have at their disposal plus 7 square meters. m. In order to use these rooms wisely, you need to glaze the balcony p 44 and loggia p 44.
Another positive side of balconies and loggias n 44 is their shape. There are two types of loggias in such houses:
Balcony type "boot" - “Boot” with a protruding nose;
- “Boat” (iron) - has a protruding corner, similar to a boat.
When working, all this must be taken into account, since the glazing itself will become more complicated.
There are different parapets, depending on the structure of the building:
- concrete;
- steel;
- concrete-steel;
- brick and concrete-steel at the same time.
When warm glazing is made, the weight of the profile is quite large. In order for the parapet to withstand such a load, it is necessary to make changes to the design of the fence.
Specifics of glazing balconies
The glazing described above is considered warm, since cold glazing only involves the installation of double-glazed windows. Double-glazed windows are installed on balconies in two ways:
- normal installation;
- installation with “removal” - installation of double-glazed windows outside the balcony.
In the first case, hinged, sliding or blind sashes are installed on the balcony. The latter can be transparent or opaque. Install on a straight surface 240 cm long sliding system valves At a length of 90 cm, you can choose any sashes. The rest of the space can be glazed using blind or hinged frames.
In the second case they use metal constructions. Using an extension, a window sill is formed on the balcony, the width of which is from 10 to 35 centimeters. It depends on the design features balcony Removal can be carried out in three ways:
- along the main line;
- directly;
- around the entire perimeter.
The price of the work will depend on the method of removing the window sill chosen by the client.
The unevenness of structures inherent in balconies of type p 44t, which have a zigzag shape, does not make glazing difficult due to plastic profiles. You can choose them as you wish. Holes in the connectors for window units can complicate glazing on bay windows, as they are drilled at the factory before installation. This makes it possible to install them without preliminary fittings, but you need to measure as accurately as possible. The cost of such glazing is influenced by the following factors:
- complexity of installation;
- structure of bay window corners.
Specifics of glazing loggias
For warm glazing, the loggia must be sealed. Foam blocks are used for this. They are installed inside. From the outside, foam blocks are camouflaged using low tides. This protects the structure from precipitation. Side walls, which separate the loggias located nearby, do not reach the parapet.
The rest of the space is partly blocked by partitions that are fixed to metal frame. Professionals close the cracks using wooden materials, foam block, lining or curved sheet metal. Loggias n 44 are either ordinary or bay windows. In corner rooms there are half-bay windows.
Features of glazing a loggia with a “boot”
It is recommended to insulate the “boot” loggia in houses up to 44t before glazing. In this case, you need to lay out foam blocks on the narrow half of the loggia. When there is a concrete curb, it can be disguised by raising the floor level.
When glazing a loggia window profile three faces should close. Here, thin metal-plastic or aluminum profiles are used so that light freely penetrates into the room. If the profile is aluminum, you can install sliding sashes. They are much better in function than hinged ones, because they are able to save free space and retain light as much as possible.
Features of glazing a loggia with a “boat”
This option provides for the presence of two faces. Can be produced.
Loggia type "boat" As in the situation with the “boot,” it is necessary to use thin metal-plastic or aluminum profile in order to save space and maintain maximum illumination. It is advisable to choose a plastic window sill, regardless of the type of profile.
There is a pillar in the corner of the boat-type loggias. To close it, a closet is often built in this place. This is good because you will need to work with fewer walls during future finishing.
The glazing of balconies p 44 and p 44 t is much more complicated as a result of their configuration and the presence of a protruding parapet with large openings. For this reason, it is recommended to trust such a procedure exclusively to professionals who know the subtleties and nuances of their business. They will do everything so that everyone can admire the balcony for many years.
You always want to decorate each room in your apartment beautifully, in accordance with the chosen design. When thinking about the design of an apartment, people get so carried away by it that they don’t notice the little things and only decorate the main living space.
The balcony is also part of your home, do not forget about it. A beautifully decorated balcony is an integral part cozy home, which always gives integrity to the overall interior. You can often notice that most people have a very sophisticated design in their apartment, but everyone forgets about the balcony.
If you have a small balcony in your apartment, it doesn’t matter; it can be decorated even more cozy and comfortable than a large one. Today we will talk to you about the design of balconies in houses p-44t, which are built up most of Moscow.
The apartments in these high-rise buildings are small, and therefore the balconies are too. To be precise, the balcony area in a p-44t type house ranges from 2.9 to 3.5 square meters. Inconsistency of design small balcony The point is that, despite the small area, there are a huge number of interesting design solutions that cannot always be beautifully applied to large balconies. Now we will look at several beautiful designs balconies, which look best in houses like p44t.
Do not forget that in no case should the balcony have a fundamental difference from the interior of the apartment. You need to try to fit it into it as best as possible. general form apartments, so that when you leave, you don’t feel like you’re not at home.
Cabinet
Don’t be afraid to apply extraordinary solutions to your balcony decor. A very good office will come out of a small balcony, if you use your imagination a little and listen to our advice.
An office is a place where everything should be laid out on shelves and there should be order. So first, get rid of all the extraneous things that are cluttering it. If you work there every day, you need to take care of warmth and comfort.
Insulating a balcony is not that expensive now. There are a lot of different insulation materials, so you have the opportunity to insulate the balcony yourself, but this is not recommended. It is better to use the services of a company that deals with insulation of premises. They will do everything professionally, and the temperature in your office will be no different from the temperature in the other rooms of the apartment.
You can insulate the floor at your discretion. It is best to select flooring material of the same shade as in the room adjacent to the balcony. When general design Once completed, you can begin furnishing the balcony with furniture.
Order a small desk with shelves or a cabinet inside. It will be very functional and beautiful. Considering that we are considering a balcony n 44t, we should not forget about rational use space. Therefore, it is best to place the table in a corner.
The remaining space gives us a little more space to think. You can decorate the second corner as you wish, but since we are making an office, it would be nice to place a fireplace there so that you can look at the glowing coals during breaks between work. This design option is completely realistic and does not require special costs. This solution is just a template that you can come up with.
You can see the balcony-office options in the photo.
Living room
From small balcony you can create a cozy corner, ideal for relaxation after work or relaxing with friends. The best option Using a balcony n 44t as a living room means furnishing it with small couches or soft cozy ottomans (see photo), on which it would be nice to drink tea and have a sincere conversation.
Garden
Making a small greenhouse on the balcony, especially if you are into flowers, is also very interesting solution. If you choose this solution, then your window will always be furnished with green plants, which will lift your spirits at any time of the year.
In addition to using plants, you can also hang beautiful candlesticks on the walls, and add colorful lighting near the floor and ceiling. A wrought iron bench or wrought iron chairs would fit well into such an improvised garden of Eden. As you can see in the photo, the balcony-garden option is also not bad.
As you can see, solutions for decorating a p-44t balcony can be very extraordinary. The main thing is that they are not afraid to deviate from the framework of the standard interior, and then your balcony will be the subject of admiration for designer art.
Young families most often live in houses like p44t, so we hope that our young generation design solutions will be to your liking.
