Selecting a paint roller. How to choose the right paint roller for painting Where is a velor paint roller used?

How to choose a paint roller? Any such tool turns the boring work of decorating a room into a creative process. The rollers are manufactured in the most different designs and sizes. When choosing a product, it is necessary to take into account the task at hand. The article will tell you how to paint with a roller and the tricks for using them.

The simplest roller for painting ceilings or walls is a wooden or plastic cylinder with a hole along its entire length; bushings that look like washers, made of copper or other material, are installed on its ends. The product is equipped with an axis with a handle.

A stop is installed at one end of the axle, a thread is cut at the other for a nut and washer, or a cotter pin is installed. A cover or attachment is put on and secured to the roller. During assembly, the cylinder must rotate freely around its axis, preventing it from jumping off.

With this design:

• Performance is significantly improved.
• The shading of colors changes qualitatively.
• The compositions can be applied on any basis.
• No other surfaces will be exposed to drops or splashes.
• No lint or hair remains on the layer after application.
• The coating is carried out evenly, without any traces of the cover material on the roller.

Rollers and mini-rollers are made from various materials: natural - merlushka, velor or artificial:

• Polyamide rollers All types of paints made on bases that contain solvents or water-dispersed compositions are applied. This material is capable of absorbing and releasing paint well. It is easy to clean and does not require special care, is resistant to aggressive elements contained in paints.

Polyamide is a fairly wear-resistant material that allows you to achieve excellent results when painting surfaces with any type of paint. The convenient length of the pile and the thin thread structure allow you to paint uneven, rough, bumpy surfaces.

• Polyacrylic roller used when applying compositions to water based or for paint and varnish materials all types with a limited amount of solvents. Polyacrylic has similar properties to polyamide, but with less wear resistance and poorer coating quality.

Have long term services, are best suited for semi-rough surfaces, but are also suitable for rough and smooth surfaces.

• Polyester roller dispersion paints, compositions for walls and ceilings are applied. Such a material with a homogeneous fiber structure has the least wear resistance.
• Foam roller for painting it is used for painting surfaces with water-based adhesive compositions. It is absolutely not suitable for enamels, oil paints and varnishes. This is due to the fact that the solvents included in their composition corrode the foam rubber, and pieces of material remain on the surface to be painted.
• Roller with fur attachment used for enamels, varnishes and oil paints. The most uniform application of paint is ensured by merlushka rollers.
• Velours helps to obtain a fairly smooth surface. This is a natural or with the addition of synthetics, a material with a uniform structure, short-length pile, ideal for covering smooth surfaces, allows you to create a uniform, good quality layer.
• Structural rollers used for applying plasters and structural paints to give the surface a textured, fine-grained finish.
• Pressing rubber rollers are used for smoothing. With their help, you can expel air from under the wallpaper, roll seams, and evenly distribute glue on the surface.
• Plastic clamping products used for rolling wallpaper seams.
• Needle roller used for perforating drywall and removing wallpaper.
• Roller for painting self-leveling floors. Serves for rolling the face layers of unhardened composition, for air removal or deaeration.
• Roller for decorative painting designed for applying plaster and thick paint to obtain a relief surface (see Rollers for decorative plaster and creating a relief surface).
• Roller for painting corners, in the photo VMU, is used for internal corners.
• Paneled rollers convenient for applying panels, so as not to cut out stencils or make a special ruler.

• Roller for painting pipes, fencing of balconies, stairs and other objects.

How to paint bark beetle plaster

Bark beetle plaster is one of the most popular types decorative covering. It can be used for finishing exterior and internal surfaces. Enough simple technology painting and affordable price, combined with a spectacular external appearance.

The disadvantages of painting bark beetles include:

• The presence of various depressions and bulges that complicate the painting of the surface. It is quite difficult to paint such a relief with a regular roller. In this case, you will need to use hand painting with a brush.
  First, the surface is painted with a roller.

Tip: To paint the bark beetle, you should choose a thicker roller.

The tool is saturated with paint as much as possible, which can flow into all the depressions and paint the elevations.

Tip: If paint accumulates in the recesses, it must be collected with a dry roller. Any unpainted areas that appear must be touched up manually with a brush.

• When painting bark beetle (see Painting bark beetle plaster - all methods) in one color, the coating does not look very beautiful.
  It is better to paint the surface twice, with the second layer applied in a different color. Thus, effective appearance. In this case, potholes and furrows will remain with the original layer, and a coating of a different color will be applied on top.

The disadvantages of the bark beetle include the difficulty of applying a two-color layer with your own hands.

To paint the surface in two colors you need:

• Add the color directly to the plaster solution while mixing. In this case, the coating acquires the desired color when preparing the material. You can use ready-made colors, which you just need to stir thoroughly.
• When painting the coating, it is better to use a special roller for painting bark beetles.. It is a little more difficult to paint the surface with it and the paint consumption is slightly higher, but with such a tool you can effectively cover all the grooves on the surface.

How to clean and maintain a roller after use

High-quality tools are quite expensive, but they can last a long time if you care for them properly. Before storing the roller after painting, it should be properly cleaned after use.

Instructions for cleaning a roller from water-based paint suggest:

• Prepared:

1. capacity;;
2. cleaning solution;
3. softener for all rollers that were used during work.

• For each type of roller, a bucket is filled warm water and two cups of material softener are added to it and everything is thoroughly mixed.
• After the fabric softener dissolves, the solution breaks the tension on the water surface and the paint will begin to dissolve faster.

Tip: If necessary, the roller can be cleaned with plain water or a mild dishwashing detergent. In addition, the paint can be rolled out onto newspapers laid out on the floor, having previously removed the excess by rolling a roller with pressure in a paint tray.

• The roller is lowered into a bucket with the prepared solution for 20 seconds.
• The instrument is removed from the bucket and washed under running warm water until the liquid becomes clear.
• After peeling the paint from the roller, it must be squeezed out of the water as best as possible and placed on an old, preferably terry, towel. Can be used paper towels thick layer so that all moisture can be absorbed.

To clean oil paint:

Tip: Do not use water to clean the roller when using paint on oil based: paint will not dissolve in water alone; it must be removed with alcohol or turpentine.

• Remove excess paint from the roller by rolling it back and forth over old newspapers.
• Alcohol or turpentine, which will serve as a solvent for paint, is poured into a clean container.
• A roller with paint is lowered into the solution and rolled back and forth, as when painting.
• The tool is rolled over old newspapers and if there is still paint on it, the process is repeated.
• After cleaning, the roller is hung on a nail or any hook to dry.
• After drying, the instrument is coated aluminum foil or plastic film to protect it from dirt and dust.

The video in this article will show you in detail about caring for the instrument.

Some tips for using paint rollers:

• If the repair has stopped for a short time, the roller can be placed in a plastic bag, which will protect it from drying out.
• The tool can be stored in a tightly closed bag in the refrigerator. After this, it will take some time to defrost it before using it.

To apply paint to surfaces, it is necessary to choose the right tool, and after finishing the work, provide it with proper care and storage.

When Norman Brickey, a Canadian resident, invented a paint roller in the early 40s of the last century, he had no idea what a revolution this simple device would make in the construction business. Since then, the purpose and external mechanism have remained virtually unchanged - the materials used for manufacturing have changed.

Not a single repair - be it the work of professional builders or work on our own– can’t do without this universal assistant. After all, with the help of a roller you can apply paint or primer, glue or varnish to the walls and ceiling. But you can’t just go to the store and buy the first tool you like. It is important to know how to choose the right size, design and type of roller for a particular paint material and type of work.

Types of rollers

When it comes to a paint roller, first of all we mean the roller attachment and the material from which its coat is made, because it is the composition and structure of the absorbent material that affects the final result and the quality of paint coatings. In order not to be disappointed at the end of the work by the remaining stains, unpainted areas, splashes or bubbles, it is worth understanding the intricacies of choosing a tool.

The working surface of the roller is a fur coat

The working surface of the roller, called the coat, is attached to the frame cylindrical and is made from different materials. When the tool is dipped into a container of paint, the coat absorbs the substance and transfers it to the surface being treated. Depending on the type of work and painting materials, rollers with different paint output and, accordingly, different coats are selected:

Foam roller

Rollers with foam coat Suitable for water-based paints and water-based adhesives, used for priming and wallpapering. Foam rollers are cheaper than others, but they also need to be changed more often - the fur coat wears out quickly. Foam rubber is afraid of paints and varnishes that contain acetone. When exposed to destructive components, foam rubber swells, deforms and practically dissolves. In addition, the foam roller creates splashes when working quickly and leaves small air bubbles on the painted surface.

Foam roller

Fur roller

Quality fur coat paints over irregularities, depressions and cracks, ensuring uniform application of paint to the surface. The fur working surface absorbs a sufficient amount of paint and does not create smudges, streaks or splashes. The fur used is mainly synthetic, less often natural sheepskin. The main disadvantage of rollers with a fur coat is the lint that comes out and remains on the painted surface.

Fur roller

Velor roller

Velor is fabric base with a pile that imitates plush. It does not roll down, does not splash paint and ensures uniform application of the coloring or adhesive composition. A wall painted with this roller will look absolutely smooth. Velours Excellent for applying oil-based, alkyd and water-based paints and varnishes and is not afraid of solvents. But this tool is not suitable for a beginner in the construction business, because the slightest defect will be noticeable.

Velor roller

Velor-coated rollers are mainly used by professional painters for finishing work. In addition, due to the short length of the pile, velor absorbs a small amount of paint, so the tool has to be dipped into it often.

Thread roller

The coat of the thread roller is made of large quantity threads attached to a woven base. Such a roller convenient for painting large areas and suitable for any type of paint and varnish materials. It is comfortable and durable as long as you wash it well after each use. The thread coat leaves a pleasant texture on the painted surface, but you should not rush when working with such a tool - rapid rotation of the nozzle contributes to paint splattering.

Thread roller

Advice: Whatever roller you choose, when purchasing, be sure to check the quality of the fasteners and the coat - it must be intact and neatly attached to the base. A roller is considered to be of poor quality when lint comes out of it or threads of different lengths stick out.

Method of attaching a fur coat

The working surface is attached to a cylindrical roller in three ways, depending on which the rollers are divided into glued, thermo-glued And with a fur coat on.

IN glued rollers The coat is a narrow strip wound and glued at an angle onto a cylindrical roller. The fur coat forms a kind of spiral, the edges of which are connected end-to-end. Glued rollers evenly paint walls due to the absence of seams. But they have a drawback - fragility. During operation, the paint destroys the glue and the fur coat “falls off” from the base.

The most advanced technology is used for manufacturing hot melt rollers. In this case, the fur coat is soldered into a plastic base, thereby increasing the wear resistance of the tool.

Coats of thermo-glued rollers

Rollers with a fur coat on They are a cylinder base on which a sleeve-shaped fur coat is stretched. In most models, the working surface is clamped on the sides of the cylinder with end caps, and only foam coats small sizes are held on the base due to elasticity.

Roller coat (separately)

Thanks to the removable end caps, the fur coat you are wearing can be replaced with a new one if necessary. Removable coats are more durable than glued ones, but they have their drawbacks. To make them, the material is stitched, and when applying the paint composition to walls or ceilings, the seam may interfere with the uniform distribution of the paint.

Advice: When purchasing replacement roller attachments, buy several at once. It will be a shame to stop painting if the coat suddenly comes off or the end clamps of the roller break.

Roller sizes

The choice of roller is influenced by the size of the surface to be processed - for a larger area, choose a tool of greater length and diameter. Depending on the size, paint rollers can be divided into three groups:

Universal (standard)

The length of universal rollers is 140-250 mm. Professionals consider the roller attachment to be 180 mm the best option, therefore, tools with standard sizes are used most often for painting work.

Facade

Facade rollers usually have large diameter and length from 180 to 270 mm. When impregnating wood, painting the foundation or flooring A large area does not require high quality finishing, so it is more advisable to use larger size rollers.

Small rollers

The length of small rollers ranges from 50 to 150 mm. They are convenient for painting corners, narrow surfaces and hard-to-reach places.

Roller pile length

Replaceable roller attachments are available with pile lengths from 4 to 25 mm. The choice of pile length depends on the quality of the surface being treated - the more irregularities there are on the wall, the longer the pile length needs to be used. For smooth walls, short-pile coats (4-9 mm) are used, which will evenly distribute the paint over the prepared wall. If you use a long-nap roller to smooth the surface, excess paint will form smudges and streaks.

For embossed wallpaper, textured plaster and rough surfaces, rollers with a pile length of 12-25 mm are used. Thanks to the sufficient length of the pile, the paint penetrates into all the depressions, recesses and protrusions on the wall. A short pile will not cope with such a task and will leave unpainted areas.

Roller design

Depending on the type of attachment of the roller to the handle, the design of the tool can be clasp or frame. Let's look at each of them.

Clasp roller

The clasp fastening system is popular and loved due to its versatility and simplicity. A clasp tool consists of a handle with a holder in the form of a metal rod, called a clasp, and a roller equipped with a device for fixing and rotation. Assembling the clasp roller is easy and quick - the roller is mounted on the clasp, and the tool is ready for use.

Clasp roller fastening

The clasp system allows you to use the same clasp handle and change roller attachments depending on the type of work and paint materials. In this case, there are no problems with selecting the diameter of the internal hole: clasps for rollers standard sizes have a diameter of 8 mm, and for small ones - 6 mm.

Frame roller

The frame roller consists of a clasp handle and a roller in the form of a hollow cylinder-frame on which the fur coat is attached. This system fixes the frame on a metal rod using plastic bearings permanently attached to the clasp. In building materials stores you can buy a frame roller, the coat of which is put on a plastic or wire “skeleton”. These rollers are convenient for painting structural surfaces - the paint will penetrate into depressions, cracks and recesses.

Frame mounting of the roller

Frame rollers are not as popular as clasp rollers. The leader in the production of rollers on frames is the Swedish company ANZA. The tools it produces are of high quality, but expensive, so not every professional will spend money on a branded roller, let alone ordinary people. Although Chinese “clones” are affordable, they become unusable after 2-3 hours of operation.

Roller handle

The handles are made of plastic and given an ergonomic shape to make it easier for the master to work long time. The tool handles are also two-component - made of plastic and elastomer, which has anti-slip properties. Due to the shape of the handle, the paint does not fall on the painter’s hands when it drips. The roller handles are easy to hang and store thanks to the holes they are equipped with.

There are pens different sizes, but the most convenient length for standard work is considered to be 25 cm.

This length is recommended when painting the ceiling if the work is carried out from a stepladder or construction trestle. The universal shape of the handles allows you to use telescopic rods that can increase the length of the handle by 0.8-4.0 m. Using such extensions, you can paint ceilings or walls of any height directly from the floor.

In addition, the same handle is used many times, and if the replacement roller attachments are worn out, it is enough to buy new ones and fix them on the holder.

Rollers for decorative painting

Rollers for decorative painting experienced the peak of their popularity in our country in the 70s of the last century, when, due to a shortage of wallpaper, residents tried to add at least some variety to the boring interior of monochromatic or whitewashed rooms. Now the tasks and quality of materials have changed, but the technology for applying drawings has remained the same.

A modern paint roller, for all its apparent simplicity, is a design tool and is widely used for decoration - patterned rollers are equally convenient for applying designs to walls and ceilings, furniture and wallpaper for painting, fabric and even paper. With the help of such tools, you can create any pattern on the surface to be painted, be it abstraction, imitation of stone or wood, geometric or floral pattern. Rollers for decorative painting, depending on the material of the roller, can be rubber or foam.

On the surface of rubber textured rollers there is a convex pattern, which, when knurled, remains on the surface to be painted. The textured roller consists of two rollers– patterned and feeding, adjacent closely to each other and attached to one handle. The feeding roller can be fur, foam rubber or velor; its task is to absorb the paint and give it to the patterned one. The textured rubber roller can be selected with any pattern and replaced if necessary.

Textured rubber rollers are an order of magnitude more expensive than regular ones, but if you buy the tool once, you can use it for quite a long time. For long term use patterned roller It is enough to rinse it thoroughly every time after performing work.

12.11.2015 13:40

A paint roller is an excellent choice for those cases when you need to paint a large surface area and a regular brush is no longer enough. The roller is also useful for covering walls with a primer or adhesive solution and applying spectacular textured designs.

The answer to the question of how to choose a paint roller lies in the purpose of this tool, the type of paint, as well as the result that you want to get after painting. We will present the main types of rollers and indicate their scope of application so that the choice for each buyer is as simple as possible.

They are a universal tool that allows you to efficiently apply almost any paint and varnish composition. Most often, experts recommend choosing such rollers for painting rough surfaces where it is necessary to obtain a uniform application of the coloring composition.

Thread rollers are a material with many threads of strong fibers (special fur-polyester), which resembles terry cloth. The advantages of choosing such a roller for painting include the fact that it does not leave lint on the painted surface. Also, such rollers are easy to care for and very easy to wash.

Rollers made of “sintex” material

Sintex rollers are tools made of special rope fur consisting of synthetic polyacrylic fibers. These rollers are offered for professional work and are divided into products for façade and interior work. Sintex rollers are chosen for applying paint to rough surfaces, which allows for uniform coloring.

Polyacrylic rollers

Polyacrylic rollers are the choice of professionals for applying any type of varnish or paint to a prepared surface. However, it is worth keeping in mind that polyacrylic is not resistant to overly aggressive environments, so such rollers are used for applying water-based paints.

The “fur” of the roller is made of durable polyacrylic, so this tool does not leave lint on the finished surface and allows you to achieve an ideal result. An excellent and, most importantly, affordable choice for painting plastered walls.

Wool rollers

Rollers made of natural sheep wool are excellent for painting with oil paints, various varnishes and enamels. Wool rollers can also be used for other types of paint. The exception here is lime-based compounds, which have a detrimental effect on the roller pile, destroying it. Wool rollers allow you to distribute paint well over the surface due to excellent absorption and paint release.

Fur rollers

Fur rollers are tools made from artificial material. The most common options are thread fur made of polyester and polyamide. These rollers allow you to work with any type of paint and varnish products, achieving excellent coating uniformity. Rollers can be used to paint large and small surfaces.

Velor rollers

Velor rollers stand out from other models in that they practically do not roll and do not splatter paint, unlike models with longer pile. Such rollers can be used for painting any surfaces, but are most often used for finishing painting of perfectly smooth surfaces. The use of a velor roller is possible when working with water-dispersion paints, alkyd and oil-based. Also, velor is not afraid of solvents, which makes it very practical and even more versatile.

Foam rollers

Foam rollers are ubiquitous for applying water-based paints and varnishes. Such rollers are valued for their elasticity, which allows the roller to restore its original shape. When using a foam roller, there are no air bubbles left on the surface, which allows you to achieve high-quality and uniform painting. When choosing a foam roller, you should pay attention to its density: the higher it is, the longer such a tool will last.

Pressing (wallpaper) rollers

Pressure rollers are often called wallpaper rollers, as they serve to smooth the surface of the wallpaper when gluing. The structure of such a roller is made of foam rubber, which allows you to create uniform force, leveling and smoothing the wallpaper and joints.

Structural rollers

Structural rollers are hard elastic foam rubber with an uneven surface. Such a roller can have large holes, all kinds of patterns on the surface, which, when smoothing the paint, allow you to get an unusual decorative effect. Also, a structural roller can be used to add texture. finishing materials, which are applied to walls or ceilings.

Polyamide rollers

Polyamide rollers are very durable. Such tools are characterized by excellent paint retention, which allows you to distribute the finished solution over the surface as evenly as possible. Polyamide rollers have some of the best chemical resistance, which allows them to be used with any composition of dyes. Polyamide rollers with long pile are used for painting rough surfaces, while similar tools with short pile are suitable for painting smooth surfaces.

Elitacolor rollers

Elitacolor rollers are professional tools for applying paint to rough surfaces. Such rollers are made from special rope fur (polyacrylic), which can work with water-dispersion paints, as well as paints and varnishes based on chemical solvents. Elitacolor rollers can be façade or intended for interior work.

Needle rollers

Needle rollers are used to uniformly distribute viscous compounds. For example, for pouring concrete floors. Depending on the type and viscosity of the composition, the needle roller may have different needle lengths.

Roller markings

When choosing a roller, you should always check the markings. As a rule, it contains an alphabetic and numerical designation:

• the Ø icon and the number indicate the diameter of the rounded part of the roller, units of measurement are millimeters;
• the letter designation is the material of the roller, as well as the surface for which it is intended (not always indicated), for example, BB is a velor roller, and VMP is a chalk roller for the floor;
• the digital designation following the letters is the length of the roller cylinder, indicated in millimeters.

For example, Ø50 BB-200 is a velor paint roller with a diameter of 50 mm and a length of 200 mm.

If you decide to paint the ceiling yourself, then success will depend on several points at once. Firstly, the quality and type of paint chosen will play a role. Secondly, for good result What matters is your skill as a painter. Thirdly, it is of great importance to obtain quality ceiling covering will have the design and type of paint roller.

Choosing a roller is a responsible task, especially since modern manufacturers offer a lot various options performance of this instrument.

Convenient design

The structure of the roller is quite simple: it consists of light metal or a plastic cylinder on which a special coating is put on (the so-called fur coat). A handle is attached to the cylinder, which can be of different lengths. This simple and time-tested design allows the roller to remain the most popular painting tool for applying any type of paint to the most various surfaces(except for curly ones). The tool is used to work with oil, water-based, acrylic, acrylate and latex paints.

The versatility of the tool also lies in the fact that it can be used to apply glue, antiseptic, primer and other liquid construction solutions.

What is more convenient - a roller or a brush?

A paint brush has its advantages when repair work and remains an indispensable tool when painting the most different surfaces. Using a brush allows us to paint the most difficult to reach places, covering elements of any shape.

However, when it comes to the ceiling, which is a flat plane, using a brush is not advisable: a roller provides a smoother finish, speeds up the work, makes it easier and more efficient. The performer gets less tired and generally completes the job of painting the ceiling much faster.

Prices for rollers

Prices for paint brushes

paint brush

A brush can be useful only if the ceiling is a shaped structure and you need to paint corners and hard-to-reach places well.

What should you pay attention to when buying a roller?

There are several parameters that are worth paying attention to Special attention when purchasing a roller; these include:

• pile length;
• fur coat material;
• cylinder diameter;
• roller width;
• handle length.

The type of coating and the length of the pile (if we are talking about fleecy materials) are especially important when choosing a roller.

Which material is better?

If you are painting the ceiling water-based paint(which is observed most often due to the suitable characteristics of this species building material), then it is preferable to choose a roller with long pile. Such a tool has good absorbent properties and can provide a smooth surface and dense painting. Short pile absorbs less solution, resulting in a less dense layer, which forces the artist to dip the roller in paint more often.

However, with all the advantages of a long-nap roller, such a tool does not give an ideal smooth surface, so it should be used for lower layers. The final layer is best done with a new roller with a medium length of pile.

Foam rubber and velor rollers have their drawbacks when painting the ceiling: foam rubber absorbs a small amount of paint, which makes it inconvenient to use. Velor may leave air bubbles.

Table No. 1. Types of rollers according to the type of coating material.

Roller size

The ceiling area can be quite large, so using a roller with a small diameter and a small cylinder width may be impractical. Therefore, it is usually recommended to purchase a large roller. There is one “but” here: such a painting tool can be heavy. Please note that you will have to work for quite a long time, holding the roller suspended. And after the paint is absorbed, it becomes even heavier. Therefore, we recommend choosing a medium roller (up to 30 cm wide), which is more convenient to use, since it is easier to hold it in weight.

Prices for acrylic paint

acrylic paint

Another point is the shape of the ceiling. It can be figured, multi-stage. This shape is difficult to paint with a large roller - you will need a medium-sized tool. You may need to supplement your arsenal with small rollers and paint brushes of different sizes.

Paint roller type VP (1 - roller; 2 - bracket; 3 - handle)

Modern manufacturers offer the most advanced designs of rollers: you can find rollers with special telescopic handle(retractable), as well as tools designed specifically for painting the ceiling and having a special trough (tray) for draining excess paint.

Also, in order to save money, manufacturers offer customers replacement elements for the roller handles. This smart choice, because the roller handle lasts much longer than the sandpaper itself, and by buying replacement sandpapers, we save on the metal base of the tool.

Video - Choosing a paint roller: types, sizes, features

How to choose a quality tool?

In order not to be mistaken with the quality of the tool, test the roller right in the store. This way you can protect yourself from purchasing low-quality items. Of course, the price already speaks volumes. A more expensive roller will last longer and provide a smoother finish, while an inexpensive tool may not last long and require more time and effort to create an attractive ceiling finish.

The required steps are given below.

Try to check how strong the tool you choose is. Squeeze the roller itself: will it deform? If yes, then it is better to pay attention to another model.

See how well the roller is made for you. If a seam is visible on the fur coat, then such a tool will not be able to provide high-quality coating on the ceiling surface (marks may remain).

If you choose a roller with long naps, just try to tug on the naps and get an idea of ​​how strong the material itself is. Is there any lint left in your hand? If yes, this is a reason for doubt. It might be worth looking into a more expensive option.

Instructions for painting the ceiling using a roller

The process of painting the ceiling using a roller is not complicated, you just need to use quality materials and act in accordance with the instructions.

“Slip” made of plywood for the roller

Table No. 2. How to paint a ceiling with a roller.

The final layer must be applied in the direction away from the window.

Video - Painting the ceiling with a roller

The main advantage of the roller over paint brush in that it provides the opportunity to cover a significantly larger surface area for processing. This tool is much more profitable for painting walls and ceilings, as well as processing wide panels and applying paint to various products.

There are times when it is inferior to brushes in performing some work, for example, in painting hard to reach places, corners, construction interface lines, but mainly it is the roller that can significantly reduce the time of painting work.

Based on the desire to get as much pleasure from work as possible, and not turn it into a long painful process, people strive to purchase convenient, high-quality tools.

This also applies to rollers. You always want to know in advance which roller is better. Their quality largely determines the ease of work. In this regard, you need to take a close look at the main elements of the tool: the coat, the cylinder.

Types of fur coats

On the modern construction market you can purchase rollers of any type and for any job. The difference between the products lies in the type of material used to sew the fur coat. Most often, foam rubber, fur, velor, and polyamide are used in work.

Foam roller

The cheapest option is to sew a fur coat from foam rubber. It is excellent for priming surfaces with water-based paints. But this type of coat is not suitable for water-based emulsion.

The main advantage of a foam roller is its low price. At the same time, it is not recommended to use it for painting walls and ceilings, since when rolled it forms splashes and streaks. But it’s a nice job to paint the carpentry with them.

This roller will paint a wooden window in just five minutes. The main thing is to first seal the perimeter of the glass adjacent to the glazing beads with masking tape.

Fur coat

Fur as the main covering of the tool is convenient for working with any composition. With water-based and oil-based ones. The fur surface absorbs paint well and does not create bubbles on the surface. work surface and evenly applies and rolls out the composition. This tool is good for masking places where cracks, chips, and small depressions appear.

Among the disadvantages fur roller for painting, the possibility of partial loss of lint during painting. It is worth carefully selecting fur coats of this type. If you save money and buy a cheaper option, you will need to be prepared to clean off numerous fluff from the treated surface.

Roller with velor coat

In terms of its properties and quality of surface coloring, velor is on par with the fur covering of the instrument. To some extent, he even surpasses him. Painting with a velor coat makes the surface smooth after drying. This coat is great for patching wooden surfaces(parquet, floorboards).

How to understand tool sizes

Rollers have their own division by size. To have a visual representation of this topic, you can view photos of paint rollers. You will find that having different parameters makes the workflow much easier. Comfortable conditions for working with the tool are created.

First of all, the dimensions of the main part – the cylinder – are taken into account. The handle parameters are of lesser importance. This characteristic breaks down instruments into the following types:

• Type – mini. The cylinder has a diameter of no more than 9 cm and a height of about 15 cm. The product is suitable for painting surfaces in hard-to-reach places.
• Type - midi. The diameter is the same, but the height is increased to 20 cm. The tool is universal and is recommended for finishing walls, ceilings and other wide surfaces. An additional advantage The roller is considered to be light in weight.
• Maxi type The length of the roller reaches 30 cm, and the diameter is 8 cm. This roller is a professional tool. Accordingly, its price will be significantly higher than previous types.

This tool can be used both on interior and exterior façade work.

Separation of rollers by functional types

Based on their functionality, rollers are divided into several groups. Based on the location of the working surface, the tool is referred to as intended for internal and external processes.

For example:

• Facade rollers. They have intermediate padding as a layer. Due to this, uniform sliding is achieved and paint splashing is eliminated.
• Textured rollers. The top covering of the cylinder can be rubber, plastic, metal, fur, and so on. Designed for creating relief patterns. Used when applying decorative plaster compositions.
• Needle rollers. Indispensable when working with polymer floor coverings. Quickly and evenly roll the mixture over the floor surface, hiding all small cracks.
• Rubber roller. Professionals work with this tool. This is one of the varieties of textured appearance, also associated with the application decorative plaster.

Photo of paint rollers