To make it, you will need a sheet of paper of approximately A4 size and a ballpoint. You can take not only ordinary writing paper, but also wrapping or newsprint (it will take a little more). A blank in the form of a trapezoid with a base length of 14–15 cm is cut out of paper. Glue is applied along the base of the blank, and a rod is pressed against it. After the glue dries, the rod is tightly twisted into paper, and the edges of the paper are additionally smeared with glue. Cones are formed along the edges of the product. In the lower part, the cone is needed for ease of holding when writing, and the upper part can be trimmed with a clerical knife.
The finished pen can be painted acrylic paint, which does not dissolve in water after drying. Also, the pen can be pasted over with colored gift paper or scrapbooking paper, as well as a page of glossy magazine or foil tape. To prevent the paper from being wiped from constant use, home-made pens are additionally pasted over with transparent tape or varnished.
Wooden handle
If you have access to lathe, you can make unusual wooden case pens. You will need wood blanks, metal tubes, a rod, a pen mechanism, glue and sandpaper.
Don't forget that Decoration Materials may affect the color of the wood. Therefore, first test them on waste - this will help insure against an unexpected result.
A saw, a machine tool, a pair of varnishes and adhesives, if used carelessly, can damage health, so it is important to remember the safety requirements when working with them.
Syringe pen
A beautiful stationery can be made from a regular disposable syringe. The nozzle of the syringe is drilled to fit the size of the writing unit of the rod. The body is filled with colored gel, rhinestones, sequins. A rod is inserted inside, cut to the size of the syringe body. The piston is filled with glue to fix the rod.
Thread handle
A tourniquet is woven from thick threads, a rod is inserted into the middle. Threads can be taken different in color and structure, the main thing is that they be of the same thickness. The tourniquet is woven very simply: one thread is superimposed on the other from the middle to make a square. You can fix the rod in the bundle with a drop of glue.
A fountain pen
For making a pen vintage style you need to take a large goose or turkey feather. If desired, paint it in any color or several at once. The fluff at the base must be cut off and sanded a little with soft sandpaper so that the future pen is comfortable to hold. The tip of the pen must be cut at an angle - it is very hard, and you can write with the resulting tip.
You can also insert a steel feather into a bird feather, and mask the junction decorative material. A pen made in this way will be more durable. And of course, you can insert an ordinary ballpoint into the pen.
Gel pen
It differs from the usual ball one in that a gel rod is inserted into the prepared flask. The gel pen-aquarium looks original. To create it, you will need a transparent tube with a wooden stopper, sealed at one end (something suitable can be found in a pharmacy or chemical glassware store).
A hole is made in the cork along the diameter of the rod, and the cork can also be painted with acrylic paint. A mixture of water and glycerin is poured into the flask - the more glycerin, the thicker the filler, and the slower the decor will float in the body. We fill the flask with sequins, stars, foil fish, insert the rod into the cork and tightly close the flask (for reliability, you can fix the cork with waterproof glue).
Pen 2-in-1
To create it, you need to take a pen and a simple pencil. Disassemble the pen, cut off a part from the pencil, based on the length of the pen, and insert it into the pen body. To fit a pencil to the diameter of the handle, it must be chipped with a sharp knife and sanded with sandpaper.
Insert the pencil into the body and secure with adhesive tape. Next, cut the rod and assemble the handle. Now the pencil will always be at hand - with reverse side the pen you write with.
By the way, do not throw away the remaining piece of pencil, it can still come in handy.
And in conclusion - a pen for lovers of spy games
Fountain pen - ordinary or made by yourself - can be filled with invisible ink. Making these inks is pretty easy. The only thing is that it will not work to pour them into the rod, because they are very liquid.
The most common are three types of invisible ink and three ways to read what is written:
- dilute solution blue vitriol- hold paper over ammonia
- lemon juice - heat the paper with an iron or lamp
- milk - iron the letter with a hot iron.
A beautiful pen can be bought at any store. But if you are a fan of exclusivity and a lover of products self made, you will be able to make a one-of-a-kind pen. A self-made stationery will become a unique author's souvenir for you and your friends.
We have collected the most interesting and creative ideas, how you can turn boring accessories into original ones, decorating them to your taste and color. You will be surprised how much more pleasant it will be to use such updated DIY school supplies even outside of school.
The school year has come to an end and you can forget about school until September. But do not rush to throw away bored pencils, pens and notebooks. After spending a little time, you can get either bright and interesting school supplies that will be a pleasure to keep your own, which, by the way, can also be very interesting to design using our ideas.
The simplest pencils, PVA glue and glitter - that's all you need to give a second life to ordinary school supplies.
Pens decorated with delicate feathers with a watercolor pattern - what could be more original?
By the way, feathers for such pens can be made from paper by coloring it in. Then they will even convey on paper all the lightness and weightlessness of the real ones.
To make such interesting "brushes" on the tips of pencils, you only need decorative paper and thread. Yes, yes, it's that simple! Tape a regular pencil with colored paper or decorative tape, but so that the paper hangs a little more from the end of the pencil. Then drag it with a thread and cut it, making a fringe.
What could be cuter than a pencil or a pen with an ever-blooming flower? The chip of such a decor, of course, is in, which should be done in advance and attached to the pencil with adhesive tape. The pencil itself can be wrapped with green paper to create a branch.
School supplies decor: how to decorate school notebooks
You can decorate a school notebook with a fabric cover. Of the advantages of such covers: they are pleasant to the touch, you can make additional pockets both inside and outside, a variety of textures and patterns, and, of course, a simple technique. Such a notebook in the summer can be used as a notebook or personal diary.
Embroidery on a notebook. It sounds strange, but it looks very beautiful and unusual. This decor is suitable for notebooks with plain and soft cardboard covers.
Stamps and drawings with paints can be made not only in the sketchbook, but also on the covers of notebooks in order to decorate these very school notebooks in this way. Try it and you will like it!
Decorative adhesive tape is also great for decorating school notebooks, folders, book and album covers. Thin strips of tape can be glued straight or diagonally, creating your own special pattern.
You can decorate an ordinary notebook with a photo collage of your favorite photos or pictures for a summer mood. The link is full.
Girls will especially love this school supplies decorating idea. The openwork decor for the cover of the notebook was created for romantic schoolgirls.
School Supplies Decor: How to Decorate School Paper Clips and Stationery Clips
To decorate your school clips and clips, you can use bright decorative duct tape. In addition, for such a decor of school supplies you will need very little material, and this school small things will please the eye for a long time to come.
Decorative adhesive tape can be tied on a paper clip or attached to it in the form of a flag. Such beautiful paper clips can even be used as.
They will look nice as a decoration for school supplies, especially paper clips. These will lift your spirits. bright colors and will decorate the school office in an original way.
Watch online how to decorate school supplies with your own hands
Now you have enough ideas for decorating yours. These and other ideas on how to decorate school notebooks, pencils, pens and other useful stationery will help set the mood for the summer and come in handy in preparation for the new school year.
Make beautiful simple pen and making it original is easy. Most original ideas that can only come to your mind.
To make a beautiful pen, you need to take the pen itself, decor material and glue. You can decorate by wrapping it with a narrow satin ribbon, attach a flower or a bow made of paper or fabric to the upper edge. Get original designer thing. Such a pen can be an interesting gift made with soul.
The idea to braid the handle with multi-colored threads using the macrame technique, and if also with original weaving, is a chic option for a stylish girl.
You can decorate your pen as you like with any beautiful things, rubber bands, stickers, feathers, rhinestones. Everything you want.
What can be done with a pen
The body of a ballpoint pen can serve as a material for various crafts.
- Can do original stand For mobile phone. To do this, you need four to five pens and rubber bands for money. Twist the three handles with a rubber band so that you get a stable tripod. Screw one or two handles horizontally to the two legs, depending on the thickness of the phone. Install the resulting structure slightly at an angle and put your smartphone on it. Watching videos is very convenient and hands free.
- From a pen and four simple pencils can do . From pencils with the help of rubber bands, assemble the base in the shape of the letter "T". Attach old pen along the bottom of the letter. The function of the bowstring will be performed by an elastic band. As arrows, you can use old empty rods. Here is a toy for the boys is ready.
Many probably remember multi-tiered chandeliers with transparent plastic pendants. - You can do it the same way. You will need a plastic circle attached to the lamp, and a lot of multi-colored transparent cases from the handles. Stationery fasten in a circle with wire or paper clips. When you turn on the lamp, the lampshade will look like a crystal, and scatter multi-colored light.
How to make a pen with your own hands
How to make a 3D pen with your own hands
Such a pen can be made from ordinary glue gun. First you need to disassemble it and remove the pushing mechanism, it is better to saw off the lower part of the pistol handle. Then you need to reduce the outlet. You can stick a paperclip in there and tape it so that it does not fall out. The next step is to attach a mini fan, these are found in various devices and are sold in stores as spare parts. Small alligator clips are attached to the fan wires, we will use them to connect the battery. Now you need to fix the krone battery on the bottom of the gun. Use plastic zip ties and glue to secure all parts. That's all - a 3D pen with your own hands is ready. You can try to draw.
For a fountain pen, you need the pen itself. You can take turkey or goose, they large sizes. Paint with dyes in any color you want. Available in several colors at once. The feather cover above the base must be removed so that it is more convenient to hold when writing. With a sharp knife, cut off the lower part of the feather under the cone. It is very hard and you can write with the resulting tip.
You can also use a calligraphy pen. It must be attached to the prepared turkey feather, and the junction should be decorated. Made in this way, the pen will be more durable.
DIY gel pen
- A gel pen can be made just like a simple one. Any material can be used as the body for the rod. Just insert the gel rod into the manufactured flask.
- Gel pen - aquarium, very interesting option and the stem can be changed. For manufacturing, you will need a transparent flask with a wooden stopper. We make a hole in the cork according to the size of the gel rod. The cork can be painted if desired. Pour water into the flask and add glycerin. The more glycerin, the slower the decor inside will float. Pour into a flask filled with liquid, various sparkles, stars and, of course, foil fish. We insert the rod into the cork and close the flask with it. Pen - the aquarium is ready.
How to make a paper pen
A pen made of paper can be of a wide variety of colors. To make it, you will need an A4 sheet and a rod. Cut off part of the sheet at an angle so that when you twist the rod, you get a beveled spout. We take the rod, coat it with glue, when it sticks tightly, we begin to twist it tightly. Finish with glue. You can color the pen however you like. You can draw various patterns. Be sure to varnish the handle so that the paper does not rub off during use.
The rod in such a pen will not change. Finished, make a new pen.
How to make a pen pencil
To create a two-in-one pen and pencil, you will need a pen, a simple pencil. We disassemble the pen. Cut off half of the pencil, maybe less. Now you need to insert the part of the pencil into the body of the pen. Naturally, it will not fit there, so it needs to be cut a little with a clerical knife. They inserted a pencil and tied it tightly with electrical tape. Now we cut the rod from the handle to insert it into place and assemble the handle. Now you do not need to look for a pencil to draw something, you will always have it on the back of the pen with which you write.
Do not throw away the rest of the pencil, you will need it next time.
How to make an invisible pen
To make an invisible pen, you first need to do. It is not difficult to make such ink at home. To do this, you need a dilute solution of copper sulfate. It has a slightly bluish tint, if you write something to them, it will not be visible. To read such a letter, you can hold the paper over ammonia.
You will have to write with such ink using a fountain pen, since it will not work to fill them into the core. And if someone manages to do this, they will still flow out, because they are very liquid.
Spy ink can also be made from lemon juice, and will show up when the letter is heated up with an iron.
How to make a pen write
If suddenly your pen has stopped writing, and there is still a lot of ink, you need to do the following.
- Disassemble the pen, pull out the writing tip and blow from the other end. Perhaps there were just air bubbles.
- Without disassembling the pen from the end with which you write, pull the ink towards you with a suction movement. It also helps a lot, and you won't get dirty.
- You can just breathe on the writing tip, perhaps the ink has thickened a little. From warm breath they will become thinner.
- A radical solution is to replace the rod, it could be defective.
Good day, brainfriends! You may be interested in learning about brain process creating a dainty ballpoint pen that I made for my wife the other day.
Such a brain pen from paper and epoxy resin in a technique known among knifemakers as "getinaks".
Making handles is a fairly common activity for carpenters with special kits and tools that are becoming more affordable. (Included tools, such as the pen core, can be easily reused for other purposes and expand your do-it-yourself options.) In that brainguide I use a "fine pen" set.
My wife (only three weeks ago we said “agree”) has joint problems and it has been found that the ergonomic shape of a ballpoint pen is very helpful in avoiding pain, which is why on top of her crafts I added a fairly large ball.
Step 1: Cutting Paper for the Pen Body
For my homemade I chose several large sheets of paper in different but accentuating colors (dark green and cream) and put them together before cutting them into 2.5x2.5cm paper squares with a jigsaw.
During this brain procedures And always, it is important to observe safety precautions! For myself I found safe way cutting paper - clamp it between two wooden blocks, and thus hold it on the jigsaw table.
You can also cut the paper with a knife or scissors, but whatever method you choose, be careful.
Step 2: Creating a jig for the handle body
I put together a small jig that will help organize the paper squares while gluing them. This conductor is made of two bars, lined up in the shape of the letter G, and nailed to plywood.
Step 3: Gluing the Pen Body
This is the main and lengthy stage of everything. brain process.
The paper squares are glued together with epoxy resin, and during the actual bonding, the surface tension of the resin and paper hold the squares together, preventing them from falling apart.
My biggest concern was that the diluted epoxy would cure faster than I could finish the bonding process. crafts. Fortunately, if you dilute it in small quantities, then more time is obtained for gluing the squares, so I had time.
I believe that experiments with various adhesives and resins, can speed up and facilitate the bonding process, compared to my experience.
Step 4: Cut out the body shape
And now the fun begins.
After the glued housing blank is separated from the jig (I did this with a jigsaw), it's time to determine where to cut it into pieces.
In the past, I have used a lathe with a long brain drill for drilling a through hole in the case, which is very convenient if this case has a beautiful wooden pattern and needs to be perfectly aligned. But in most cases it is still easier to use a drilling machine.
Before cutting on the jigsaw, I marked the cut lines with copper tubes.
Step 5: Drilling a Hole in the Case
Fixing the body workpiece crafts in a vertical position, with a 7mm drill I drilled through hole. But this is for my "handle assembly kit", yours may require a different diameter drill.
Step 6: Gluing the Tubes
I sand the copper tubes to increase the bonding surface area, and to remove dirt and grease, which can reduce the quality of this braingluing.
I applied medium density cyanoacrylate/superglue to the hole in the body of the pen and onto the copper tubes that came with the kit. The whole trick here is to not stop when inserting the tube into the hole. As the tube slides over the hole, the adhesive acts as a lubricant, but when stopped, it quickly bonds. Ideally, at the end, get the tube completely placed in the body of the workpiece.
For pushing the tube into the body homemade you can use a pencil or something similar.
***Tips from comments***
@Scanner2 writes:
After gluing the copper tube into the case, there may be some adhesive left inside the tube. To remove it, I use a 6mm drill, which I scroll in the opposite direction, thereby reaming the tube. The reverse direction does not engage the material of the tube, but passes through it.
(Great tip - I'd add that depending on your "set" and the way you're sanding the copper tubes, it might be a good idea to run a file over the sharp edges of the tubes, which will reduce the chance of the tube snagging on the body and make it easier to connect the handle when before. business comes).
Step 7: Facing
My "handle assembly kit" came with a trimmer.
I clamped it in the lathe chuck brain machine and planted on his pin copper tube blanks to blades that remove excess material around the tube. The result is completely flat surface for the insert to be mounted later.
If there is no such trimmer, then you can grind or cut the outer surface flush with the copper tube.
Step 8: Connecting blanks and forming a profile
Prepared paper blanks are put on the core with an insert of the appropriate size between them.
In my case, the liner is thin, "slimline", although there are many other styles to choose from.
After that, I began to shape and finish the shape of the pen using various tools. For more complete review turning tool and working with it, I have prepared a short guide for one magazine, and you can read it.
Step 9: Finishing and polishing
Before application finish coat on under the tree, I wanted to make sure the shape of the pen was "perfect".
After my satisfaction and sanding with 1000 grit sandpaper, I applied a thin layer of superglue, spreading it evenly with my finger. The main thing here is to apply enough, with a small amount of glue will not lubricate the surface during its distribution.
So I put on brain pen four coats of superglue before sanding it down with 1500 grit sandpaper and buffing it with polishing compound to bring it to a mirror finish.
Cabinetmakers call this process rubbing, which results in a flawless look that satisfies you, and it takes a lot of effort to achieve it.
Step 10: Handle Assembly
Components in a kit like mine have a friction fit but can easily fail if you're not careful.
I came to the conclusion that it is better to dry-assemble the kit in order to understand the position of the components in homemade and work out the order brain assembly. For example, if you do not install the tip of the pen before the mechanism, then there may be problems. I used a vise to press the parts and get a good fit.
One last thing I would recommend is getting some high quality ink for your pens, because regular ink is usually just fine, but not the best. All Cross style pens essentially have the same mechanism so you can successfully use the same ink as people who have spent a lot more money than you on their pens, plus there's the cool thing about having one in your kind of pen, and which you made with your own hands.
That's all, everyone brain luck!
