Construction staplers are also called furniture staplers. They are increasingly being used in construction, furniture production and the economy. Used for punching and fastening various materials. The tool simplifies many operations. So that the hand does not get tired, in some types a battery, a mains connection or a pneumatic mechanism are provided. Due to this, the work is significantly accelerated. For many models of staplers, in addition to conventional staples, nails and round staples are used as consumables for attaching wires. The impact force and penetration depth are controlled by special regulators. This increases the accuracy of the work. To select and operate such a device correctly, you should know some of the nuances.
The principle of operation and purpose of construction staplers
A stapler is a device for fastening sheet material to the base. Construction stapler appearance looks like a pistol.
Its action is similar to driving nails with a hammer. To play a blow, you need to pull the trigger or cocking lever, depending on the type of instrument. And then release the trigger. With the help of a system of springs located in the body of the gun, the clip is fed from the clip into the outlet channel and is instantly driven into the material. At the moment the trigger is released, the bracket moves to the exit. Therefore, in the passive state of the stapler, the equipment is already ready for clogging. In some models, the legs of the staples are bent, in others they are simply driven in. Not only brackets, but also nails can be used as equipment. You don’t need to make any special efforts, so the process is easy and fast. It can be used by women and the elderly.
The stapler is designed to perform two types of tasks, which expands the scope of the tool:
In both cases, the fastening is reliable. To increase its resistance to deformation, a consumable is used, in which the sharpening is performed asymmetrically, or the coating is melted.
Staplers are used in various industries:
- in construction;
- when renovating premises;
Nailing baseboards with a stapler
- for the production of furniture;
Upholstering furniture with a stapler
- when laying a cable;
- in the production of packaging;
Stapling cardboard with a stapler
- for the manufacture of greenhouses at their summer cottage.
Types of furniture staplers
Varieties of staplers according to the type of effort applied:
- mechanical or manual. Operated by hand. low power is a disadvantage of such devices. But there are also advantages: light, cheap, compact. Mechanical staplers are reliable in operation, as they consist of only a body, a lever and a spring mechanism. There are two types:
- electrical. There can be two types:
- pneumatic. The most powerful staplers. They work with compressed air pressure. They have a hose for connection to the compressor, and sometimes an electric cable. Therefore, they are inconvenient for domestic use. Used in manufacturing and construction. They have a high cost.
Mechanical staplers are:
Stapler classes:
- household. These are mechanical and cheap low-power models of electric staplers;
- professional. These include more powerful electric and pneumatic tools.
Types of staplers by type of equipment:
- stapled. Used for domestic work;
- nailers. They are used for professional and household activities. Work with large staples and nails. Tooling length over 12 mm;
- universal. They can work with flat and round brackets, nails and hairpins.
For optimal choice stapler, you need to solve the following tasks for yourself:
- frequency of use of the tool: every day or from time to time;
- places of use: indoor, street. Is there electricity there;
- do you need the accuracy of driving equipment;
- materials you plan to work with.
Depending on the purpose and working conditions, choose the type of stapler:
- for infrequent work with non-solid materials, a mechanical stapler is suitable;
- if you don't need precision in staple placement and have the ability to swing, then consider choosing an impact stapler. He is light. Attaches to the mounting belt;
- for a large amount of work in places where mobility is needed, take a closer look at a cordless tool;
- if you work indoors with a power outlet and do not want to overpay for a battery, buy a stapler with a mains connection;
- if you need a stationary powerful device, do not hesitate to take a pneumatic tool.
What characteristics to look for when choosing a stapler:
- the presence of an impact force regulator. A mechanical tool has two types of regulation: minimum and maximum or smooth adjustment. Electric has up to 6 modes. The setting is made with a software switch. The thinner the material, the less power impact, otherwise dents form;
- Double punch. Only electric staplers have it. For hard materials, a large tooling is used that will not clog immediately. The double strike mechanism itself detects this and works a second time. If there is no such mechanism, then you will not immediately see that the nail heads are not fully clogged;
- removing fasteners with a stapler. If there is this function, then to remove poor-quality clogged equipment, you do not have to do it manually or with a nail puller;
- case material. Structural steel staplers weigh more than plastic;
- rubber inserts on the handle. Their presence reduces the recoil of the tool, and the hand gets tired less;
- battery type:
- nickel-cadmium are suitable for low temperatures. But they have a memory effect, so they are quickly discharged. They are used in inexpensive models;
- lithium-ion. They hold a charge longer, but they tolerate mechanical impact worse;
- nickel metal hydride. Lightweight and have a large charge resource;
- number of hits. The operating time of battery staplers depends on this characteristic;
- tool power. It depends on the number of beats per minute. With an increase in power, the speed of the device increases;
- fastener type. Choose a stapler with fasteners that suits your needs.
Choice of staples for the stapler
When shopping for staples, you need to know which staples fit your stapler. The type of equipment is indicated on the packaging, in the instructions and on the body of the tool. Staples have characteristics that must be considered when choosing:
The most common consumable is U-shaped brackets marked "Type 53". They have found their application in the upholstery of furniture with textile materials and in the connection of wood products, plywood, chipboard and hardboard. Staples of the 140th type are in second place in demand. They are shorter and thicker. Due to the increased area of contact with the material to be joined, the likelihood of material rupture at the point of attachment to the base is reduced. Therefore, they are convenient when working with thin details: fabrics, PVC film, as well as wood, plywood, chipboard and hardboard. Half round braces are of two types.
Types of semicircular staples
Two characteristics are important for a stapler: shape and size. And you choose the type of sharpening for yourself. By the size of the snap, you can judge the purpose of the stapler.
Examples of types of staples and nails for staplers
How to load staples with your own hands
For refilling staplers different types do the following:
- conventional mechanical:
- shock mechanical:
- electric:
- pneumatic:
How to charge a mechanical device: video
Setting and adjustment
Staplers of different types are configured in different ways. But the principle of action is the same: with an increase in thickness and hardness, it is necessary to increase the impact force and the degree of pressing.
Malfunctions and repair of construction staplers
Two frequent breakdowns a mechanical stapler is an idle hit and a weak hit.
Blank blow elimination
The reason lies in the development of the striker. He ceases to cling to the bracket.
Weak hit elimination
How to eliminate a weak hit: video
Replacing a piston in a pneumatic device
Disassembling a pneumatic stapler and replacing a piston: how to repair everything quickly
A stapler is much more convenient to work with than a hammer. It is indispensable in conditions of limited space. The tool is simply set up and recharged. Using a stapler greatly facilitates and speeds up the work. Check out the specifications and features of the selection to find the right device for your needs.
A furniture stapler or, as they like to call it, a strobe gun is a very necessary thing. But sometimes, even when recently purchased, it starts to work incorrectly and either does not drive the staples into the tree completely, or they completely get stuck in the tool. In most cases, this is "cured" by simple tuning or is due to improper use of the tool. But there are situations when the stapler has already worked out its resource to such an extent that the parts in it simply wear out or they lead over time. How to fix the stapler so that it starts working again, as before, and is it possible to do this in principle?
The principle of operation of the stapler
It is clear to anyone versed in mechanics how this tool works. It is clear that the bracket can only be clogged with an impact mechanism driven by a powerful steel spring. It is cocked by pressing the cocking lever. When we squeeze the palm, the spring is compressed. At some point, the lever releases the spring and it, instantly straightening, activates the percussion mechanism, which, striking the bracket, hammers it into desired material.
Two main varieties and their device
But in order to start repairing the stapler or, due to malfunctions, understand what can “break” in it or cause these problems, you should familiarize yourself with the structure of the staplers in more detail. Two types of mechanical furniture staplers are presented to your attention, which are most common. The most common is this option, in which the spring adjustment screw is located on top.
Here is another type of stapler, where the spring tension screw is located under the handle. This is a rarer variety.
It can be seen that the principle of operation of both mechanisms is similar, and therefore the setup and repair will be almost the same, as well as the causes of problems with the operation of the tool.
The Problem of Incomplete Stapling
Such a thing is solved by simple tuning of the instrument. If the stapler does not clog the staples, no repair is needed. It is enough to tighten the spring adjustment screw. The more the screw is screwed in, the more stress the spring will be under and the next descent will finish the bracket to the end.
If the problem is not in the settings and before that the stapler worked fine and suddenly stopped, most likely the problem is that one of the next staples was jammed and stuck in the slot. Over and over again, the impact mechanism strikes it, but it is stuck firmly, thereby preventing the magazine clamping device from bringing the next bracket to the “starting” position. Here you need to open the store and remove the jammed bracket. On the next shot, everything will fall into place.
There are staples in the store, but the stapler does not clog them.
How to fix the stapler in such a situation? Most likely, in this case, you just need to lubricate the head of the clamping mechanism of the staples. You should open the store, remove the staples, drop oil on the rammer and develop it. When you are sure that the rammer slides perfectly in the folding frame of the magazine, reload the staples and test the tool.
The problem with bent braces
In this case, the media is too thick for the staples you selected. This is treated either by buying stronger branded staples made from quality metal, or by replacing longer ones with shorter ones. Staples with short legs will fit into dense material without any deformation, and they will hold almost the same as long ones, due to the hardness of the wood or other material into which they are driven.
The problem of issuing a pair of staples at once
How to repair a stapler with your own hands, if it began to issue a pair of staples at once? This problem is more serious. Due to improper use or over time, the striker of the impact mechanism may be deformed. If the metal from which the striking part of the mechanism was made was of poor quality, which applies to almost all cheap and Chinese models, its striker can either flatten out or bend slightly, as a result of which, with the next blow, it will catch not one, but immediately a pair of staples. How to fix the stapler in this case and is it possible in principle? You can fix the situation, but you have to disassemble the entire stapler. You can read about the procedure in the next section.
Problem with permanently stuck staples
This problem stems from the same area as in the previous case. Although the striker of the impact mechanism goes into the slot, even if it is slightly bent, staples will constantly get stuck between it and the guide wall of the casing. At first, it will work normally every other time, and then it will be impossible for them to work at all due to the fact that over and over again, clogged staples will deform it more and more. In these cases, it can be stated that the stapler is broken, and how to fix it should be described in more detail.
First of all, you should prepare the necessary tools. What you need to completely disassemble the stapler:
- screwdriver ordinary;
- file for metal;
- pliers;
- hammer;
- vise (required).
When everything is prepared, you can start disassembling. There is nothing complicated in this and you should not be afraid that you will not be able to collect it later. Otherwise, you simply will not succeed. For repair you need:
- Fold out the magazine, remove the remaining staples.
- Unscrew the adjusting screw completely.
- Remove the released spring through the hole at the top.
- Now disassemble the case. The casing parts are held with pins. They have cast caps on one side and lock washers on the other. They must be pulled out so that each pin freely crawls out of its hole.
For repair, it will be enough to remove two pins from the side of the percussion mechanism.
It happens that on the impact mechanism, the stop against which the spring rests can break off. In this case, only welding will help, and it’s not a fact that the tool in this case will last for a long time. As a result, the welded stop will still fall off and you will have to buy a new stapler.
When the tool is fully assembled, we check it, at the same time adjusting the spring. If everything is ok, you are great. If not, it means that something is “not bent” somewhere. We'll have to disassemble everything and check the evenness of the parts of the impact mechanism more carefully. Therefore, it is better to do everything the first time with high quality and check it ten times.
Breakdown prevention measures
Some craftsmen advise long-term storage tool to loosen the screw furniture stapler that regulates the compression of the spring. The less the spring will be in a compressed state, the greater the possibility that it will not sag in the shortest possible time and will work out a resource several times longer than stated in the warranty card. Of course, before the next use, it will again need to be adjusted, but this is the lesser of evils. It's better to spend a few staples reconfiguring than going to the store for a new stapler.
An important factor in the prevention of "diseases" of such a tool as a stapler is its lubrication. Regardless of whether he was in constant work or in storage, it is advisable to lubricate the mechanical parts of the tool every three months, then you won’t have to puzzle every time why the stapler does not work well and how to fix the tool. What should be lubricated and how:
- Unscrew the adjusting screw completely, pour a little oil into the hole to sewing machine, screw the screw back in place and fire a few blank shots.
- Then open the magazine where the staple blocks are inserted and pour some lubricant into the slot of the percussion mechanism. Raise the stapler upside down and fire a few more blank shots.
- It is also desirable to lubricate the mechanism (rammer) of the supply of staples.
It's simple Maintenance It will not take much time, but it will prolong the life of your instrument.
Conclusion
In order for the tool to work for a long time and reliably, it should be used correctly and maintained under the agreed conditions. It is especially worth taking care that the strobe is not affected by an environment whose humidity will exceed 70%. The drier the air in the pantry with the tools, the longer they will last and questions like: “how to fix the stapler” will not affect you at all.
More recently, a variety of upholstery work was carried out with nails and a hammer. Most of all it concerns furniture production. If you turn over a soft sofa or chair, then there are no longer nail heads on the back surface, special ties or staples catch your eye.
These latest devices have conquered the construction market. There are even staplers that can get the job done using small nails. The hammer and nails are a thing of the past. No broken fingers, no need for small nails. As a result high performance. However, this design sometimes fails, but it is a pity to part with such a device. The question is how to fix construction stapler is it possible to do it yourself?
It is much more convenient to work with such a tool than hammering nails with a hammer. The speed of work increases several times.
Before proceeding with the repair of the stapler, you need to familiarize yourself with its design, varieties and basic work criteria.
The main types of models
The manual stapler does not require careful maintenance. You just need to periodically lubricate it.
- Manual staplers. This group includes mechanical staplers equipped with a manual drive. They are divided into several types, based on the task to be performed.
- Staple hammer. This construction stapler with a strong blow hammers a bracket. The speed of such a model is much higher than manual analogues, however, the accuracy of staple driving leaves much to be desired. Such staple hammers are in most cases used for:
- insulation fixings;
- roofing material installation.
In other words, the stapler is used where the speed of work comes first, and not its accuracy.
Cable construction stapler. This tool is specially designed for the installation of cables that can withstand a load of 50 V. The diameter of the cable to work must be no more than 7.5 mm. When choosing such a stapler, the diameter of the wire with which you have to work is taken into account. Most often, cable devices are used for a large amount of work, when it is required:
- fix the cable;
- lay the electrical network;
- install communication lines.
regular models. This tool has already become a classic among such devices. He has manual drive, which is pressed against the surface, and after pressing the trigger lever, the bracket is driven into the material.
Electric staplers are considered one of the most powerful, because. have reinforced springs.
Combined models. This construction stapler simultaneously combines operations that perform different kinds staplers equipped with a manual drive.
In addition to the models presented above, there are also other varieties of this tool. They are divided into:
- professional;
- household.
Professional models are distinguished by their positive characteristics:
- great resource;
- ergonomics;
- no plastic parts.
The negative side is the high cost of the stapler.
Electric staplers. This variety is widely used for household needs. It is very easy to work with an electric stapler, you just need to connect the electricity. However, the cost of such a stapler is much more than a manual counterpart. It is not economical to buy such a model just to repair furniture. A manual stapler is more suitable for this job. But if we are talking about the constant repair of furniture, then it is better to use the electric option.
pneumatic models. Mostly these tools are used in their work by professionals. For domestic needs, such a construction stapler is not used. Clogging of the bracket occurs from a pneumatic impact. This air method is used in production where an air compressor works.
In case of special need, you can install your own compressor, but it is better to purchase a compact model, the dimensions of which correspond to the dimensions of a small suitcase. To perform the work, you only need an electrical network.
The price of such devices is incredibly high. In connection with this device, professionals who repair furniture use it. Such a pneumatic stapler is also found in private manufacturers.
Back to index
Materials required for the operation of the stapler
The pneumatic stapler works with the help of a compressed air compressor.
Usually when they use the term "type of staple", they mean its thickness. It has different sizes and staple width. In European countries, staples are most often used:
- thickness - 0.75 mm;
- width - 11.4 mm.
Basically, a lot of varieties of staples with a variety of dimensions are produced. The choice of consumables depends entirely on the task at hand. For example, long staples are most suitable for creating a high load. For fixing not very strong material, for example, plastic film, it is better to use thick staples. When the cable is fixed, the choice of bracket depends on its diameter.
If you work with a branded stapler, you must definitely purchase branded staples. They differ in many ways from their ordinary counterparts. They have a lot positive qualities, no corrosion.
These brackets are made of stainless steel and have a galvanized surface. Besides:
- superbly sharpened;
- they correspond to all drawing data;
- the slipway is distinguished by absolute accuracy;
- have a warranty period.
The presence of a guarantee indicates the originality and quality of such material.
Back to index
It is always a pleasure to use such a device. I installed the staples in the store, pressed the stapler, pressed the lever, and that's it - the material is securely fixed. But there are times when the staples do not fly out because of the charger. There is only a trace of the drummer. There is only one conclusion - it needs to be repaired. To do this, you need to disassemble the stapler in a certain sequence:
- remove the adjusting screw;
- remove the spring
- remove the protective cover.
- remove pins;
- remove the lock washers.
To carry out repairs you will need:
- pliers;
- screwdriver;
- hammer;
- vise;
- file.
After carrying out such work, it will be possible to consider the drummer. The main failure of the tool is the development of the thrust pad of the drummer body. With its help, the joint operation of the trigger lever and the percussion mechanism is ensured.
The drummer is the main executive part of the stapler. A powerful spring presses on it, the force of which can be adjusted with a special screw.
A charging carbine is fixed at an angle of 90° relative to the percussion device. It contains brackets that constantly perceive the action of the spring. In the non-working state, the brackets are closed with a special plate attached to the body.
The trigger system is responsible for the joint work of the drummer, combined with the charger. It contains:
- cocking lever;
- powerful spring;
- rocker.
To hammer the bracket, you must press the lever. The rocker arm will raise the firing pin. The spring will stop compressing when the clip enters the striker mechanism. WITH great strength the drummer will hit the bracket, it hits the base.
In fact, the main criterion for the normal operation of a construction stapler is the compliance of several operations:
- striker platoon;
- supply of staples.
https://youtu.be/mSQ9Oqg45vA
The work of the drummer must be synchronized with the rocker. If this did not happen, then the shot was made "idle". In other words, there was a platoon of the trigger device and its operation, however, the drummer at that time could not capture the bracket. This is exactly what happens when the thrust pad of the protrusion of the drummer wears out.
It will take some time to repair. You need to clamp the drummer in a vise. With a regular file, sharpen the protrusion and give it its original shape.
By similar actions, you can significantly extend the life of the stapler. You just need to do such a repair operation immediately after the gun starts to idle. During repair, the striker plate will be shortened, since it will need to be sharpened all the time.
Buy construction and furniture staplers: prices, specifications, reviews. Pick from over 100. Furniture staplers Yermak Furniture stapler Hand tools. Size: (4-14mm)x10.6mm.
A furniture stapler is widely used in the household, with its help you can easily nail a greenhouse film, cover furniture with a cloth, and it will also come in handy in other situations. The variety of models will confuse an uninformed person, so in this article you will find helpful tips by choice, how to use it, which brackets are suitable for which models. Home staplers are widely presented on sale, the first thing you need to pay attention to is the type of staple.
The most popular and commonly used type of brace is type 53.
Most models use exactly type 53. This type has the following dimensions: staple width 11.4 mm, thickness - 0.7 mm.
Of course, you don’t need to know these sizes, you just need to know what staples your “pigalle” works on, their type. The second is how deep the staples can be hammered. Furniture pistols are simple (staples 4-8 mm deep, they are inexpensive). Most often made of plastic, intended for infrequent use.
Only small staples are used, so only fabric or paper can be nailed to them. Cheap and unpretentious, the price is about 100 rubles. There are also options 4-10 (staples from 4 to 10 mm inclusive). Such pistols are already made of metal, though there is no adjusting screw. Yes, however, it’s useless, 10 mm staples can be hammered without maximum adjustment.
As a rule, type 53 staples are used. Staplers 4-14 mm (very first photo in the article). The most popular and best selling.
Made of metal, good quality. Use staples 4-14 mm deep with 53 type. The main difference from others is the presence of an adjusting screw, with which you can increase or decrease the impact force. As a rule, if the bracket is more than 10 mm deep, then the screw must be tightened in the direction of increasing the impact force, otherwise the bracket will not fully enter the tree.
Janzur Country On Map here. A wide range of staple sizes (4,6,8,10,12,14 mm) will allow you to choose the optimal depth for the job. Of the good models, the Zubr company can be distinguished - reliable and high-quality, the price is 330 rubles. Also, from household models, it is necessary to single out a model with a type of bracket 140. It is thicker, has dimensions: a width of 10.6 mm and a thickness of 1.2 mm. If you load type 53 staples into a type 140 stapler, it will fire 2 staples at once. Therefore, it is so necessary to know the type on which the "pigalle" works. Most often, type 140 pistols support several types of staples, these are small studs and semi-circular brackets for clogging the cable.
It can be said that this universal option who is a pleasure to work with. However, it does not support the most popular type 53 bracket. The Stayer stapler, shown in the photo below, supports 4 types of staples: type 140, type 300, type 500 and type 36. Its price is 650 rubles. Staple type 53 is the most used, used in most staplers. Rectangular Staple width 11.4 mm Thickness 0.7 mm.
Dimensions (depth) 4-14 mm. Sold in packs of 1000 pieces. There are 2 types: hardened (hard) and simple. Hardened are used for strong or glued wood (chipboard). Ordinary staples are 2 times cheaper, designed for soft wood. Type 140 Strong, thick staples, also used for fastening material to wood, plywood, chipboard. Rectangular brace. Width - 10.6 mm Thickness - 1.2 mm Dimensions 4-14 mm Packs of 1000 pieces.
The cost is higher than that of type 53 staples. Type 36 Semi-circular cable clamps. Staple Width - 7.6mm (Maximum cable diameter 6.4mm can be pinned) Thickness - 1.2mm Sizes - 10, 12. 14mm Type 300 Small T-head studs. Are applied to fastening to a tree, daner, a chipboard. Nail thickness - 1.2 mm Sizes - 10, 12 and 14 mm.
Type 500 Carnations without cap (finish type). In general, it looks like a type 300, only without a hat. Sizes - 10,12, 14 mm. If you are doing furniture production and use the appropriate tool constantly in hard mode, then the usual household models won't last long.
Therefore, for such purposes, there are professional options. The RAPID tool proved to be excellent. This company specializes in the production of only furniture pistols, so they are of excellent quality.
However, their cost is rather big, for example. A standard pistol for staples of type 53 costs 2200 rubles. However, according to customer reviews who have bought a couple of these models from us, they are very strong. Before that, they bought ordinary household ones, but they often failed. Therefore, it was decided to buy 1 professional stapler for testing - it survived 10 conventional staplers. As you can see, the difference is simply huge. For home use the usual inexpensive one, for example, the Zubr company, is quite enough.
How to insert staples For those who have picked up a stapler for the first time, this can be a problem. But after the first time, you will immediately learn, nothing complicated. Here's a photo for you. First, you take out the “staple pusher” with a spring from the pistol, then insert the staples with the tip down and push them in with the “springy thing” to the end until it clicks into place.
Preparing the stapler for work Pull out the latch, which is located at the back of the stapler. Insert the brackets into the special groove.
Staples must be inserted with the tips down. (P) Install the spring latch in place. The stapler is ready for use. How to use the stapler Firmly attach the stapler to the surface where you want to hammer the staple. Without lifting the stapler from the surface, press the lever until you hear a characteristic sound. This action will require mechanical effort. If the staple does not fly out, then it is stuck and you need to get it out by following the 4 steps of preparing the stapler for work.
The bracket was successfully hammered. To avoid injury furniture stapler how to use such a tool, it is important to thoroughly understand. If you are using a mechanical stapler, first adjust the screw adjuster. Adjustment must be made to draft material by turning the knob from minimum to maximum. If the fastener does not enter the material from the first blow, then you will need to re-adjust your furniture stapler, and if it does, then you start working on the “finish”. To drive staples at the right distance, it is best to mark such places in advance with a pen or pencil.
You can also use a latch, which must maintain the same distance when driving in fasteners without prior marking. Don't forget to also hold the material while making shots so that the material cannot move out when the staple is driven in.
Do not forget to also monitor the presence of staples so as not to be left without them at the most inopportune moment for you. When the tool is not in use, secure the handle with the safety lock. That's how it's supposed to be for safety reasons.
When performing these simple recommendations, you can easily handle the upholstery of a sofa or other necessary task associated with a furniture stapler, the price always depends on the type of tool and its manufacturer. Construction stapler repair. 0 Р'ыбираем мебельный РјРµСанический степлер Рё СЃРєРѕР±С‹.
РќРµ путайте тип СЃРєРѕР±С‹! Мебельный степлер широко применяется РІ СРѕРяйстве, СЃ его помощью РІС‹ беРпроблем прибьете парниковую РїР »RµRѕRSѓ, r ± CљrµSMun, RAML јR јR јRP ± μR" sњrr ° ° °sћ, cm ° rhr¶rµr ѕrir їrer ‚res ‚і Сђ ѓreys ° С † ryes †. РњРЅРѕРіРѕРѕР±СЂР°РРёРµ моделей поставит РІ тупик неосведомленного человека, поэтому РІ этой статье РІС‹ най дете полеРные советы РїРѕ выбору, как РёРј польРоваться, какие СЃРєРѕР±С‹ РїРѕРґСРѕРґСЏС‚ для РєР°РєРёС РјРѕРґРµР»РµР№ .
Степлеры для РґРѕРјР° РІ продаже представлены обширно, первое РЅР° что нужно обратит СЊ внимание — это тип СЃРєРѕР±С‹. Ran ° ј ј ‹№ RARIRїRASASR" CџSHHARѕP ‹RO ё ° С ° Сѓs, ryosѓrѕr" sњrsharјrјs ‹r. ±rrєrѕR 2‹ ‹‹ ‹th " »РµР№ испольRSѓСЋС‚ именно тип Читать далее.
Upholstery fabrics in stock! Furniture pistols Pistols Sort: Price A furniture stapler is one of the main tools of any craftsman involved in the repair of furniture and apartments. The choice of their sizes and types is wide, but there are two most popular types: - mechanical. Easy to work, but requires effort to fasten. At frequent use such staplers often fail, but for periodic work they are the best option, - pneumatic. If you have a large amount of work, then you should choose this type of stapler. For this tool to work, you also need to purchase a compressor through which air will be supplied.
1 The furniture gun is great for both the professional and the average user, you just need to choose the right one. For example, with it you can easily attach to wooden frame polyethylene film and make a greenhouse with your own hands. And if the corners of the carpet are constantly bullying, then a stapler will come to the rescue. And do not forget in the obivtkani.ru store, because without them even the most best stapler. But remember that each furniture gun requires staples of a certain size and suitable for the type of work that you plan to do.
Individual entrepreneur Malashenko Vladimir Alexandrovich Belarus Minsk st. Kolesnikova 26-97 Date of registration in the Commercial Register / Household Services Register: Number in the Trade Register / Household Services Register / Register of Manufacturers of Goods: 159815, Republic of Belarus Registration number USR: 192028775 UNP: 690859461 Registration authority: Minsk City Executive Committee Date of registration of the company: Working hours: Day Working hours Monday 09:00 - 18:00 Tuesday 09:00 - 18:00 Wednesday 09:00 - 18:00 Thursday 09:00 - 18 :00 Friday 09:00 - 18:00 Saturday Closed Sunday Closed.
The main actuating element of the stapler is the drummer.
Rules for using a construction stapler
It is under the action of a powerful spring, the compression ratio of which is adjusted using the appropriate screw.
A charger (magazine) is located perpendicular to the percussion mechanism, in which there are staples under the action of a spring. In the non-working position, they are locked with a “strike” (a plate riveted to the body of the drummer).
A. FADEEV,
Moscow
ABS is a type of plastic. Xs, is it necessary info, but I don't care.
If something like the price of the club and Yuska, then Ikea. There are IKEA offices in Riga, where you can order any product, or look after something on the spot.
http://www.irideja.lv/
Well, or Spice Home, everything is there too.
Construction staplers: mechanical, electrical, pneumatic
But this is not the price of a club and of course not yusk.
http://svetnew.ru/shop_content.php?coID=62?SSL
http://abvirtuves.lv Kitchen furniture-design, production, sale.
http://Ahamebeles.lv Furniture for office, kitchen, bedroom, living room, corridor, nursery
http://Alandeko.lv Home furniture
http://Alhaus.lv Sale of furniture
http://Ambergs.lv Home furniture
http://Ameter.lv Antique furniture - little used and New furniture from Europe
http://Archinteri.lv Kitchen furniture, exclusive German kitchens
http://Bauskaspakalpojumi.lv Furniture manufacturing
http://Birojamebeles.lv Office furniture
http://Burotime.lv Office furniture
http://Ciekurs.lv Home furniture
http://Coppa.lv Office furniture
http://Denovo.lv Office furniture
http://Divanoitaliano.lv Home furniture
http://Edelveisseg.lv Office and meeting room furniture
http://Eliza-k.lv Home furniture
http://Elkemebeles.lv Home furniture
http://Ergolain.lv Home furniture
http://Farens.lv Kitchen furniture
http://Formus.lv Furniture from Italy
http://Furniture.lv Home furniture
http://Gmebeles.com Sale of furniture
http://Hanzasmebeles.lv Home furniture
http://Juki.lv Home furniture
http://Jysk.lv Home furniture
http://Kalge.lv Home furniture
http://Kate.lv Home furniture
Kids-colors.lv Children's furniture
http://Kuhni.lv Kitchen furniture to order
http://Leksima.lt Office furniture
http://Loku-mebeles.lv Sale of furniture
http://Lonas.lv Upholstered furniture for children
http://Lord.lv Wooden furniture
http://Lujs.lv Sale and production of furniture
http://Majigaisnams.lv Home furniture
http://Manasmebeles.lv Home furniture
http://Mc2.lv Home furniture
http://Mebekom.lv Furniture for schools and kindergartens
http://Mebelesvbm.lv Antique furniture
http://Mikstas-mebeles.lv Home furniture
http://Mn.lv Furniture, furniture sale
http://Mtn.lv Sale of upholstered furniture
http://Narbutas.lv Office furniture
http://Natuzzi-salons.lv Home furniture
http://Omega.com.lv Office furniture showroom
http://Optimata.lv Wooden bedroom furniture
http://Petpas.lv Home furniture
http://Polimebeles.lv Home furniture
http://Praga.lv Czech kitchen furniture
http://Rasa.lv Manufacture of office furniture
http://Reaton.lv Home furniture
http://Rigasmebeluserviss.lv Home furniture
http://Rkf.lv Armchair factory
http://Salonsarka.lv Home furniture
http://Salonsmoduls.lv Classic furniture
http://Sanoda.lv Office and metal furniture
http://Silena.lv Kitchen furniture
http://Simra.lv Kitchen furniture
http://Sk-celtnieks.lv Custom-made furniture
http://Standard.lv Home furniture
http://Taps.lv Salon of upholstered furniture
http://Topveikals.lv Home furniture
http://Vilgots.lv Home furniture
http://Vincents.lv Home furniture
http://Virtuvesnams.lv Kitchen furniture
http://Virtuvespasaule.lv Kitchen furniture
http://Voke3.com Manufacture and sale of kitchen furniture
http://Waterlilly.lv Wicker furniture
http://Zunda.lv Natural wood furniture
http://www.mebeles.lv/ HERE
) my father makes panels, table covers, paintings, etc.
in marquetry style) but it costs tens of thousands)
from 2 lats to 100 =) it all depends on the size of the bracket, the driving force .. the most expensive ones can generally work from a pneumatic pump
http://mantugalerija.eu/web/?page_id=4175&lang=ru
What did you do relatively recently when you needed to reupholster upholstered furniture or attach glassine to the frame of a house under construction? They took a hammer in one hand, nails in the other, and then for a long and tedious "bale" on them, and sometimes on their fingers.
Today, few people want to perform such simple operations in an antediluvian way, especially with a large amount of work. After all, there is a stapler for this - a mechanical spring-action staple gun.
Well, if the tool suddenly failed, do not rush to throw it away - repairs can be quite simple.
It is a pleasure to work with a stapler - I loaded a block of staples into the store, put the gun to the right place, pressed the lever - in a moment the material was securely attached to the base. When I needed to insulate attic room country house Isolon (polyethylene foam) with a thickness of 10 mm, I could not get enough - the stapler made my task so much easier. About 70 m 2 of material I attached to the roof slopes in a matter of hours. However, when there was very little left before the completion of the work, the tool began to “fool” - I press the lever, and instead of the bracket, there is only an imprint of the drummer plate. I checked the charger - the store is full.
I began to understand what was the matter (photo 1 ... 6).
I unloaded the magazine, unscrewed the adjusting screw, and then removed the spring of the percussion mechanism. After that he removed protective covers pistol body, first releasing the pins from the locking split washers, and got close to the drummer. The cause of the malfunction immediately became clear - the thrust pad of the drummer body was developed, which ensures the interaction of the impact mechanism with the rocker arm of the trigger.
To make it more clear to those readers who have encountered a similar problem, but have not yet figured out its causes, I will try to explain in a nutshell the principle of operation of a staple gun (see Fig.).
Typical design of a stapler - staple gun
The main actuating element of the stapler is the drummer. It is under the action of a powerful spring, the compression ratio of which is adjusted using the appropriate screw.
A charger (magazine) is located perpendicular to the percussion mechanism, in which there are staples under the action of a spring.
Construction stapler. Description, features, application and price of the stapler
In the non-working position, they are locked with a “strike” (a plate riveted to the body of the drummer).
The interaction of the striker with the charger is provided by the trigger, which consists of a cocking lever, a rocker arm and two return springs.
When you need to drive in a bracket, you press the lever. At the same time, the rocker with its “beak” grabs the drummer by the ledge in the body and lifts it, compressing the spring until the next bracket is in alignment with the striker. After that, the drummer, which is under the action of a compressed spring, breaks off from the beak of the rocker arm, which continues to move along the arc, and the “firing pin” drives the bracket into the base with force.
Thus, the main condition correct operation pistol - the consistency of two processes - the supply of staples and the cocking of the drummer. The drummer should not break off the rocker ahead of time. If this happens, the gun "blanks", i.e. the trigger device is cocked and fired, but the striker does not capture the bracket. It is this situation that occurs when the thrust pad of the protrusion of the drummer body is developed.
It will take a few minutes to repair this malfunction. It is enough to clamp the drummer in a vice and, armed with a file, restore the original shape of the protrusion (photo 7).
In the same way, you can increase the resource of the pistol several times - it is enough to repeat this operation every time, as soon as the pistol starts to "blank" again. At the same time, you will have to undermine (shorten) the striker plate.
So do not rush to part with your tool - it will still serve if you do not spare a little time to repair it.
A. FADEEV,
Moscow
Dear visitor, you have read the article "If the stapler failed", which was published in the "Workshop" category. If you liked or found this article useful, please share it with your friends and acquaintances.
Earn from your knowledge. Answer questions and get paid for it!
Furniture stapler, mechanical and electrical: reviews, instructions and applications; How to choose a quality stapler for furniture?
A furniture stapler is a tool that is used to fasten or fasten parts that are made up of materials that are not very hard. Fastening is carried out using special brackets for a furniture stapler. These staples come in many variations and vary in size, material, and color depending on the job. There are also various types of furniture stapler, reviews of each are on the Internet. This tool has many different names (taker, stapler, staple gun, etc.). This is due to the fact that this tool is quite popular and widespread among the people.
Electric and manual furniture stapler: device and tips for choosing a tool
Not everyone knows how to choose a furniture stapler. It is worth noting that choosing such a tool, you need to consider that it has many varieties. Therefore, it is necessary to take into account the operating parameters and characteristics technical details with which you will work, as well as the device of the furniture stapler itself. Having studied all the nuances, you can go to the store and buy a furniture stapler. 
A manual furniture stapler is a mechanical tool that is worked with by applying physical effort. Main plus hand tool- this is its mobility and independence from electricity, as well as from other energy sources. The requirement of physical effort is the main disadvantage of a manual stapler, since with large amounts of upholstery work, a huge amount of time is spent. This fastening tool can only be used for partial or complete upholstery of furniture at home, and not in factories with industrial volumes. These tools are best purchased from companies such as gross, matrix and similar companies.
An electric furniture stapler is a tool that works with electricity or a battery. It is best to use this type of unit for medium-sized upholstery work. The main disadvantages of this type of stapler are: the low rate of fire of the mechanism, the weak impact force of the tool, as well as its rather rapid wear.
To work with industrial scale furniture upholstery, a pneumatic furniture stapler is used. Since it is fast, durable and strong compared to other types of similar building units.
Video “furniture stapler”: how to use, how to charge, and what staples are needed
In order not to be injured by a furniture stapler, it is important to thoroughly understand how to use such a tool. If you are using a mechanical stapler, first adjust the screw adjuster. Adjustment should be made on the rough material by turning the knob from minimum to maximum. If the fastener does not enter the material from the first blow, then you will need to re-adjust your furniture stapler, and if it does, then you start working on the “finish”. You should know in advance how to charge a furniture stapler. This can be found in the instructions for the unit.
To drive staples at the right distance, it is best to mark such places in advance with a pen or pencil. You can also use a latch, which must maintain the same distance when driving in fasteners without prior marking.
Don't forget to also hold the material while making shots so that the material cannot move out when the staple is driven in. Do not forget to also monitor the presence of staples so as not to be left without them at the most inopportune moment for you.
When the tool is not in use, secure the handle with the safety lock. That's how it's supposed to be for safety reasons. By following these simple recommendations, you can easily cope with the upholstery of a sofa or other necessary task associated with a furniture stapler, the price always depends on the type of tool and its manufacturer.
Furniture stapler, instructions for use: how to choose staples?
The instructions for the device have data that you should rely on when choosing brackets:
- The depth of the staples - it can vary from 4 to 14 mm. This parameter is determined by the nature of the upcoming work. For example, a tapestry on the back of a chair can be “shooted” with 8 mm staples, and for felt you will already need to use a depth of 10 - 12 mm.
- Type - it all depends on the model, the marking on the package should be the same as in the description for the device. For example, if the staples are small for a particular device, then they can "shoot" several pieces at a time. In addition, skewed staples in the tray are almost inevitable here.
In addition, you should be wary of the seller's recommendations to replace staples of one type with another, similar one. Charges that are similar in depth may differ in geometry, which may not be noticeable to the eye, but is critical in the operation of the stapler. 
How to choose the right furniture stapler?
Are you wondering how to choose a stapler for furniture? Everything is very simple here: we make a choice based on what kind of work we have to do. So, if you need a device for upholstery of a sofa or chair, then you can get by with a mechanical device, because furniture frames are usually made of soft wood. The effort applied by hand to a mechanical stapler will be quite enough for work.
If you have to work with harder materials, for example, with chipboard, then mechanics are indispensable. Sufficient power will have an electric stapler for furniture. Pneumatic tools are even more powerful, but this is likely to be a waste of money. It makes sense to buy pneumatics for use in construction work. 
A high-quality mechanical stapler, what is it?
A mechanical stapler, furniture, is not difficult.
How to use a construction stapler correctly?
However, in its design there are features on which the convenience and efficiency of using the device depends. Attention should be paid to the following:
- Store transparency. It is not at all critical for the operation of the device, but it will be very convenient to control the number of staples.
- Screw for adjusting the impact force. Different wood density and upholstery thickness - regulation here will greatly facilitate the work.
- Narrow working tip of a stapler for furniture, mechanical. Will provide greater accuracy in the installation of brackets.
- Stopper on the handle. This is a matter of safety - you will be protected from an accidental "shot".
- Rubberized handle. Greater convenience when working, the device will not slip in your hand.
Electric stapler for furniture: mains or battery?
The cordless furniture stapler is very convenient because the person working with it is not tied to a source of electricity. That is, you can work with the device even in the country, where there is no electricity. As a rule, the battery capacity lasts for quite a long time. Such a stapler does not have frank disadvantages, however, it is worth buying it only if there is a need for wireless access.
In all other cases, it is better to choose a furniture stapler, electric, mains powered.
And that's why:
- The network device will have more power than an independent one.
- Even the most capacious battery tends to run out.
- The price of a network stapler is lower.
- The weight of the battery device is higher, which means that it works long time it's harder for them.
Rules for using a mechanical stapler: how to charge the device?
How to use a furniture stapler is not difficult to figure out. But let's take a closer look at the process of charging a device with a mechanical drive.
- We put the stapler on the fuse.
- In the back of the device we find a sash that closes the hole in the “clip” for staples and fold it back.
- From the hole we pull the rod with the spring.
- We insert a block of brackets inside, “backs” towards the handle of the device.
- We return the rod to its place, clamping the staples inside the stapler with it.
- We lower the sash until it clicks. Then you can get to work.
How to use a furniture stapler: The video contains an overview of the mechanical model.
How to choose a furniture stapler so that it is safe?
For devices with any drive, mechanical or electric, a button is required - a stopper that protects against accidental operation. Actually, for a mechanical stapler, such a stopper is quite enough. But an electrical device, in order to be considered truly safe, must also have protection against “idle” operation. That is, the "shot" should occur only when the working part of the stapler is pressed against the working surface.
In addition to human safety, there is also the concept of “quality control of work”. This is very useful feature, which will protect you from unnoticed flaws in your work. It lies in the fact that the electric stapler will turn off every time the staple is not fully clogged or crooked. So you can notice the defect in time and eliminate it. 
How to fill the pneumatic furniture stapler?
Let's take a detailed look at how to insert staples into a furniture stapler. The very first thing to do is to lock the device. So you protect yourself from injury due to an accidental "shot". Further, the sequence of actions will be as follows:
- We find and press the button responsible for opening the boat for staples. After pressing, either the tray cover will “drive off”, or the tray itself will move out of the handle. It all depends on the design of the model.
- We turn the device over, once again we make sure that it is blocked.
- We put the staples for the furniture stapler into the tray, with the "backs" to the device, and the "legs" to ourselves. Make sure they lie flat.
- Close the tray until it clicks.
- We turn the stapler over with the working side away from us, remove the lock.
After charging, the tester must be tested. After that, do not forget to block the mechanism again. 
The stapler is one of the assistants both at home and at work. With this tool, you can reduce your efforts in working with papers, while repair work in everyday life, improve working conditions in solving production issues.
Types of staplers
Staplers differ:
- by design:
- mechanical;
– electrical;
- pneumatic;
- type:
- staplers;
- nailers;
- universal;
- by appointment:
- assembly (stationery, stitching, packaging, etc.);
— construction (furniture, cable, tackers, etc.);
- management:
- manual (with the help of a hand - squeezing / unclenching);
- with foot pedal
- semi-automatic;
- automatic.
When choosing a stapler, you should consider the type and nature of the work.
The main elements that ensure the operation of any stapler are the store and shock-return 
device. The store has a holder with U-shaped guides, into which a cassette is inserted with consumable(staples, nails), The store is equipped with a consumable supply mechanism and is made in the form of a spring-loaded pusher, on the one hand, having a thrust plate, on the other - a latch for fixing in the store. The shock-return device is a striker made in the form of a plate with dimensions corresponding to the dimensions of the used staples or pin, the diameter and length of which correspond to the length and diameter of the nail head. The striker is fixed on a striker, which has a shape depending on the design of the stapler and, on the other hand, abuts against a spring, the force of which is regulated by a screw. To eliminate shock loads, the device is provided with a buffer (shock absorber), which is made in the form of a polyurethane gasket installed in the device case.
The device is controlled:
- in a mechanical stapler - with a lever hinged on the body of the stapler and on the other hand, having a movable rocker included in the groove of the drummer;
- in an electric stapler - the solenoid of an electromagnet performs the function of a drummer. When the button is pressed, the contacts are closed. The current passes through the elements of the control unit, made in the form of a circuit board, to the electromagnet coil, as a result of which the device is triggered;
- in a pneumatic stapler - the function of the drummer is performed by the piston of the pneumatic cylinder. When the trigger is pressed, acting on the pneumatic distributor, compressed air enters the cavity of the pneumatic cylinder, resulting in a percussive action.
Types of malfunctions and repair
Lack of fastening element (bracket/nail) in fastened materials. Most often occurs when consumables leave the store. The stapler should be rendered inoperable. The consumable cassette is removed from the magazine. If possible, the pusher is removed. Clip reclines in 
side, as it is hinged. The jammed detail (bracket / nail) is removed with tweezers, a narrow flat screwdriver. Next, the stapler is prepared for further work in reverse order.
Slaughter of fastened materials with two or more elements (staple / nail). This can happen due to two reasons. The first - due to wear (bevel) in any direction of the end surface of the striker. Remove the casing of the percussion device. Disconnect and remove the firing pin. Bring the end surface of the striker to correct form small file or sandpaper. The main condition is that the end surface should not have a convex appearance. Otherwise, the edges of the staples will protrude during slaughter. To maintain the distance of the striker, at the buffer / shock absorber (polyurethane gasket), grind off the supporting surface adjacent to the body of the percussion device to a size corresponding to the size of the striker being machined.
The second is the deformation of the guide surface of the body of the percussion device. For mechanical staplers, this is the deformation of the surface of the casing adjacent to the striker.
Removed with a hammer or pliers.
The work of the drummer "idle".
For mechanical staplers, it occurs as a result of an early jump of the rocker from the bearing surface of the drummer groove. In this case, a bevel is produced in this place, which is removed strictly perpendicular to the surface of the striker with a file.
For other staplers, if the case is overheated, this indicates an unsatisfactory condition of the rubbing surfaces or a breakdown individual elements(e.g. springs). Bringing the stapler into working condition is possible when replacing faulty elements.
When you press the lever / button, the complete absence of the impact device.
For mechanical staplers, there are violations of the interaction between the drummer and the return spring (for example, breaking the base plate under the spring). In this case, instead of one upper rivet for fastening the striker to the striker, you can put a screw with two nuts and shorten the spring by the size from the screw to the base plate. For other staplers, there is no power supply to the electromagnet coil or compressed air into the cavity of the pneumatic cylinder.
Should be remembered : all repairs and maintenance should be carried out during a power outage
tool and bringing it to a non-working state.
