Crafts from pvc pipes. Useful homemade pvc pipes. Crafts from plastic pipes for the playground

From plastic pipes with your own hands.

Organizers - convenient storage devices

Even without special skills, you can easily make such useful crafts from plastic pipes with their own hands. Even very short cuts of different diameters will go into business. To work, you need a sharp knife and glue.

The drawing shows how to cut off one end of the pieces of pipes, so that you can then make a convenient organizer for writing trifles or bathroom accessories. It is only important to try to ensure that the angles are the same everywhere.

Then, the cuts of the workpiece are attached to a plane: a stand or a wall. If desired, you can paint the organizers or apply a pattern or ornament to them. And you can even paste photos of the most pleasant moments of life.

Using this algorithm, you can make other crafts from plastic pipes with your own hands: a creative shoe shelf, a sock keeper, a wine shelf. And if the cuts are made strictly horizontally, then you get beautiful planters or flower vases.

Designer find - an armchair made of scraps of propylene pipes

A good owner will never lose anything. With a reasonable approach, every little thing will go into action, and through the efforts of a patient master, you can get amazing crafts from plastic pipes. With the help of the same knife and glue, a luxurious chair is easily made with your own hands.

In this case, pipe segments are cut to arbitrary lengths in large quantities. It is only important to observe the same dimensions of the longest supporting pieces.

Then the segments are glued along the length. The longest supporting pieces should be located at the same distance from one another. For armrests, the segments are prepared above those that make up the seat. And for the back you will need even longer ones.

It remains only to sew beautiful pillows and fill them with padding polyester or sheathe the foam parts of upholstered furniture with fabric.

Stool from scraps of polypropylene pipes

They say that the goal is cunning for fiction. This is the absolute truth! Only not a goal, but an economical person is able to invent something similar - to create amazing crafts from polypropylene pipes left after repair or construction, that is, practically from garbage. So, with his wise approach to life, he will never be naked.

For a stylish stool, you will need thin cut pipes of different lengths. Before work, you should make patterns according to paper drawings. Pipes with asymmetric bevels on both sides are cut along them and glued together along the length. The last cut is a reference, it will serve as a leg. Therefore, it is the longest and with a horizontal lower cut.

When all four side parts are assembled, they are fastened with corner trims. The bottom is assembled from short pieces with a horizontal cut at the top. The stool can be painted in any color, or you can leave it white - it all depends on the preferences of the master.

Fence flower beds or sandboxes

According to the same algorithm as chairs and stools are made, you can build other necessary things. It will be practically

Plastic pipes make excellent original fences at their summer cottage or in the yard country house. Moreover, you can use even the shortest trimmings of various lengths and thicknesses. They are fastened together along the length in the form of a miniature fence and dug around a flower bed or sandbox.

You can use glue to make such a creative fence. And it will be even more interesting if the trimmings are tied with wire, imitating a wattle fence.

Children's Corner

If you apply imagination, you can create interesting crafts from polypropylene pipes that will please your beloved children. Cool stands for laptops and easels, canopies over a crib and frames play houses easy to assemble with fittings and tees.

You can strengthen the joints with additional glue, and cover the product with paint and varnish. And you can decorate the top of the craft with stickers or ornaments.

Greenhouse for summer cottage

It is difficult to list all the crafts made of plastic with their own hands created by master dreamers. But not to mention such a necessary and useful structure as a greenhouse is the height of imprudence.

For construction, you need to protect the allocated place with boards or bricks and dig pins around the perimeter. Their diameter should be slightly less than the pipes used.

Now you can start designing. Therefore, the next step is to fix the pipe sections on the pins in the form of arches. To do this, first, the ends of the pipes are put on the racks on both sides. Then you can additionally attach the pipe from below with a strip of tin to the perimeter of the fence.

You can add structural rigidity with the help of several pipes, which should be placed perpendicular to the arches. The intersections are crosswise tightened with wire or strong tow.

Now it remains only to stretch the film on the structure - and the greenhouse is almost ready.

Coffee table with curly legs. Master Class

Plastic pipe (PVC) crafts are amazing design work. For example, the original with a glass top and bent legs will become a real attraction of the home.

Of course, first of all, you should carefully consider, calculate and draw out all the details of the future model of plastic pipe crafts. It is not difficult to build drawings with your own hands if the master has a skill in this regard. Otherwise, you can use the ready-made, which is offered here. Sizes are taken randomly.

The legs of this table are arched. To add rigidity to the pipe, you need to reinforce it. For these purposes, a strong wire is suitable. The master on the desktop draws a life-size shape of one arch and lays the first piece of pipe with a rod inside. Then he gives the arch the desired shape. The same should be done with the second segment. Although to give desired shape You can use a cardboard template.

Then, on the table, the shape of the holder arch is drawn, on which the tabletop will lie. Here, too, it is appropriate to use a template. Holders are made according to the algorithm described above.

It is best to connect the legs to the tabletop holders with tees. For greater fixation, you can coat the joints with glue or cement. The design, assembled from scraps of PVC pipes, is painted in the desired color. The glass can be glued to the holders to prevent it from slipping. Although it will be quite appropriate in this model.

In general, many other useful and beautiful things can be made from pieces of polypropylene pipes, you just have to think carefully and apply your skills manual labor and diligence.

Plastic pipes are successfully used in the installation of plumbing, sewerage, heating systems. They are usually bought in specialized stores. The cost and ease of processing made such materials popular. For building or repair work they are taken with some margin, and after completion, unnecessary pieces remain. So what can be made from these scraps of plastic pipes?

Material and its qualities

PVC pipes and the remaining mounting elements will be successful crafts. A zealous owner will not throw them away, litter their balcony or cottage with them. After the plumbing is done, the skill of processing and docking will appear. Why not use it in creating useful things, improving living space. Fantasy, skillful hands and the ideas on our photo tube crafts will inspire you to create unusual items.

The main advantages of pipe materials:

• price, PVC pipes are inexpensive, and you have already paid for trimming, you may have to buy connecting elements;
• environmental safety, plastic water pipes completely neutral, do not give corrosion;
• the strength and light weight of the structures are ensured, which is undoubtedly convenient;
• appearance, white plastic looks good in any modern interiors;
• service life - manufacturers confirm the half-century life of pipes;
• ease of assembly and disassembly, if necessary, repair of structural parts.

Processing Features

The manufacture of any crafts requires accurate measurements and accurate cuts. This is mentioned in every pipe craft master class. Three rules for working with plastic must be observed:

• Measure the length of the segment with a tape measure, be sure to mark with a marker.
• Cut the marked area with a knife.
• Fix the pipe before cutting it with a hacksaw or pipe cutter.

Connections are made easier if the pipes are cut at right angles. Fasteners sold in construction stores calculated for this angle.

Cut and clean the cuts so that there are no nicks and chips.

Pipes can be bent. To do this, they are heated with a building hair dryer or, with caution, gas burner. The heated pipe is bent according to the template, fixed and left to solidify in this form.

How and what to connect

PVC pipes have become popular due to the ease of installation and assembly work. To connect them, you need corners, couplings, crosses. They are fastened either by hot soldering using an “iron” or simply with glue and self-tapping screws.

If the design does not require tightness, then soldering the pipes is not necessary, and without it it is also easy to disassemble the structure. This technique is used when creating greenhouses, when they are mounted for the spring-summer period, and then dismantled for the winter and stored in this form.

Crafts from plastic pipes

Products made of PVC pipes according to the assembly methods are divided into two types:

• collapsible, this is a kind of constructor that is assembled and disassembled many times;
• not collapsible, they are assembled once.

In the first case, such structures are assembled for the season or if necessary. Interesting crafts from pipes for summer cottages - greenhouses, gazebos, pools, or folding chairs and tables for hiking in nature are examples of collapsible crafts. Lightweight, durable and useful products are easy to assemble and disassemble.

In non-collapsible crafts, pipes are fastened with glue or screws. Short cuts are easily connected into simple bookshelves, coasters. Try your hand at assembling elementary structures, look at the result and be inspired by it to create products in a minimalist style original ideas pipe crafts.

Armchairs, chairs will update the interior of the apartment. And if you have basic knowledge in the field of electrical engineering, then you can assemble unique lamps - sconces, table lamp, chandelier or floor lamp.

Very short remnants up to 10 cm long are well suited for designer organizers. Tools will find their place in them on the wall of the workshop, stationery trifles on desk, even cosmetics in the bathroom.

Assembly example

Let's show how to make crafts from pipes with your own hands using the example of a mobile clothes dryer. The most simple form looks like a folding easel. The dryer is made from two rectangles of the same height but different widths. The inner rectangle is already made by 10-12 cm. The widest place of the dryer was 80 cm, but you can do it at your discretion.

For its manufacture you will need:

• all pieces of pipe with a diameter of 25 mm, legs 60 cm long 4 pcs, 20 cm 12 pcs, crossbars of the base 80 cm 4 pcs, crossbars of the inner rectangle 70 cm 3 pcs;
• connecting corners 2 pieces;
• tees 12 pcs;
• clamps 2 pcs.

The procedure for assembling the structure

We make dryer racks from segments 20 cm long. To do this, we vertically connect 3 such pieces with tees. We get racks a little higher than 60 cm. Insert the legs from below, we get 4 racks 120 cm high. We connect two racks with a wide crossbar using corners.

We insert the crossbars into the free horizontal holes of the corners, we get the main and inner rectangle. Clamps fasten the inner narrow rectangle to upper crossbar basics.

The dryer is installed as the letter “L”, for stability, you can adjust the angle of the rectangles. Laundry is hung on the crossbars, you can put the dryer in any convenient location. Assembled structure easy to hang on the wall in the pantry.

Important: Similar step by step instructions showing how to make pipe crafts are easy to find on the Internet. The use of leftover plastic pipes is not limited to the ideas presented, this material can really be used in your own home workshop.

Photo crafts from pipes

A zealous owner never throws away the remnants of materials after repairs. Even pipe cuts and the remaining over-purchased fittings will find a use. Crafts from polypropylene pipes are a great way to realize your fantasies and make useful household items with your own hands.

Useful designs for the garden plot

The use of plastic pipes for the garden

A greenhouse made of polypropylene pipes will replace an outdated structure made of wood or metal, which requires annual painting (wood rots quickly and metal rusts). Once having built a greenhouse frame from polypropylene pipes, you can forget about the need for maintenance, repair and painting for many years. It is enough to pull a new one once a year polyethylene film and the greenhouse is ready for use.

Necessary materials:

• pipes made of polypropylene of the required length (the number depends on the installation step of the arcs and the length of the future greenhouse);
• cement;
• sand;
• polyethylene film.

Assembly steps:

1. Concrete one end of each pipe at the selected spacing (usually 1m).
2. Bend the fixed pipes.
3. Concrete the other end of each pipe.
4. If desired, you can fix the arcs among themselves longitudinal pipe using clamps. This will give the structure the necessary rigidity.

1. Cover the frame with plastic wrap.

A home-made greenhouse made of polypropylene pipes can also be made in another way, if you use PP tees to fasten the pipes together.

Instead of a film, polycarbonate can be used. This will make the greenhouse more expensive, but you won’t have to make a constriction every year and buy a new film.

A greenhouse made of polypropylene pipes can be made collapsible. It is convenient to collect such a design in the spring, plant seedlings, and then, when the seedlings are planted on permanent place, disassemble and put in a shed for storage.

1. Prepare pipes desired length.
2. Drive metal bars into the ground through a certain selected step.
3. Put each pipe with one end on the bar.
4. Bend each pipe into an arc.
5. Put the other end of the pipe on the bar.
6. Cover with foil.

If there is not enough space on the site, then multi-tiered beds are made of polypropylene pipes. The structure in cross section can be in the form of a triangle or a rectangle.

The device of multi-tiered beds:

1. A frame is assembled - a holder for beds from pipes of large or medium diameter.
2. Beds are being made. For this, pipes from PP are taken. large diameter. From horizontally located pipes, the top is cut off (less than half a diameter) along the entire length. Holes are drilled at regular intervals in the lower part.
3. Pipe-beds are fixed to the frame.
4. A layer of drainage is poured at the bottom, and then a layer of earth.
5. Plants are planted.

The main advantages of multi-tiered beds:

• They take up little space.
• The soil is not waterlogged, thanks to the holes in the lower part and the drainage layer. Plants do not get sick, the roots do not rot.
• Plants do not shade each other.
• Ease of construction.
• Ease of disassembly and assembly.
• Durability.

Having made and installed such a bed on the balcony with your own hands, you will always have fresh greens on the table.

Plastic gazebos in the garden

Location of pavilions outdoors places high demands on the material for manufacture.

Material requirements:

• resistance to temperature extremes;
• resistance to corrosion;
• moisture resistance;
• strength;
• small specific gravity.

All these requirements are met by products made of polypropylene pipes.

plastic furniture

Furniture made of polypropylene pipes is durable, as the service life of the material is about 50 years. Products are lightweight and easy to assemble. The main tool is a soldering iron for pipes.

Designer creative ideas help to make stylish furniture able to decorate any room.

Children's furniture

It is usually difficult for young families to immediately withdraw a large sum from the budget for the purchase of ready-made furniture for a children's room. In addition, affordable furniture is quite bulky. An alternative would be self-assembled furniture from pipes and connecting elements. The future owner can also take part in the development of the sketch and assembly. Such furniture has all the advantages inherent in PP pipes.

Particularly suitable plastic furniture for summer cottages and recreation outside the city.

Pipe shelves

The main structural elements are pipes and couplings. The shelf holder is a frame made of polypropylene pipes. Shelves made of plywood can be installed on the holders by fixing them with self-tapping screws. And you can use the design without plywood. Books are placed directly on the holders, resting against the wall. If you are a fan of minimalism, then these bookshelves are for you.

high chair

Required materials and tools:

• pipes of medium diameter;
• fittings of the required configuration;
• plywood;
• foam rubber (optional);
• upholstery fabric;
• wood saw;
• soldering iron for plastic soldering;
• stapler for upholstery work with staples (instead of a stapler with staples, you can use a hammer and small cloves with washers from pieces of a plastic bottle);
• self-tapping screws.

Manufacturing steps:

1. Legs are assembled from pipes and fittings using a soldering iron.
2. Cut out a square from plywood right size, a piece of foam rubber is laid on it and upholstery fabric on top. The piece of upholstery fabric should be bigger size so that you can bend and attach from the inside with staples using a stapler.
3. The seat is attached to the legs with self-tapping screws.
4. You can also make a back.

A properly made chair made of polypropylene pipes will turn out to be quite durable and comfortable.

Little things for everyday life

For the manufacture of convenient organizers for all sorts of little things, you need to pick up pipe trimmings of the same diameter. One end can be cut at an angle for easy fixing.

Large diameter pipe cuts can be used to store shoes. Such shoe stands will save a lot of space in a small hallway, shoes will not be stored in bulk, and each pair will have its own cell.

A convenient multi-tiered clothes dryer is a necessary thing in the household. If you make such a dryer from polypropylene pipes with your own hands, then the resulting design will be stable and reliable. It will not be carried away or overturned by a gust of wind. Constantly being in the open air, such a design does not rust and does not rot, it does not need any maintenance at all.

by the most a simple product coat hangers are necessary in the household. For manufacturing, you will need 3 pieces of pipe - 2 of the same length and 1 a third longer. All three segments are strung on a strong twine. The ends of the string must be tied. A wire hook can be attached to the upper corner of the isosceles triangle, if it is at hand. Otherwise, you must leave the end of the twine of the desired length. Shoulders are ready.

Environmental friendliness, durability, lightness make crafts from polypropylene pipes in demand. And the ease of installation will allow everyone, using a little imagination, to make the necessary household item.

If there are unnecessary plastic pipes at home, then you should not get rid of them. It turns out that this material is suitable for the manufacture of a wide variety of crafts. Indeed, a lot can be done from plastic pipes. In general, if you decide to make crafts from pvc pipes then arm yourself with a soldering iron and imagination. PVC pipes have several advantages.

They are white in color. You can connect them not only with a soldering iron, but also with glue. Another design can be connected to each other without handy means. In this case, it will turn out collapsible. Next, a catalog of crafts will be presented that will inspire you to create something interesting.

Crafts catalog

Place to store shoes.

To create this little thing, a decent-sized pipe is suitable. It is simply cut into several parts, in which it will be convenient to stack shoes. Further, these parts are glued together with glue. After that, the finished structure is attached to the wall.

Craft for gamers.

Maybe many game lovers face some problems while playing. Indeed, many people are not very comfortable playing their favorite games due to the fact that certain conditions are not created. Of course, buying a special table is an expensive undertaking. Therefore, it can be made independently, having PVC pipes and a piece of chipboard available.

Flowerbed for a garden and a summer residence.

This article presents country crafts from plastic pipes. Do not throw away old pipes. Thanks to them, you can make the most wonderful products. For example, from a pipe of normal diameter it will be possible to make an unusual flower bed. You can plant a wide variety of plants in it. The design of the garden will become even more beautiful.

Alcove.

If you dream of your own gazebo in the garden, then your dream may be feasible. And at the same time, you will not be able to seriously spend money. It is possible to build a structure from polypropylene pipes. Of course, next to such a structure it is worth planting climbing flowers. With the help of them a pleasant shade will be created in the summer.

And in your garden such an unusual arch may appear. You already understood that you can make it yourself using the same cheap material. The design will give your garden splendor and make it beautiful.

Shower.

Such a design can appear in every suburban area. Cooling down with pleasant water will appeal to everyone without exception. Equip the structure with water and it will pour through small holes that should be done in one of the pipes.

Chandelier.

Crafts from polypropylene pipes will also be useful. In particular, for a country house, you can make a functional chandelier. This product will serve you for an incredibly long time.

Bird feeder.

It will be convenient for all birds to eat food from such a functional feeder. Such a product has undeniable advantages. Feed will not be scattered on the ground. And this will be a significant savings. Yes, and it will be more convenient for you to pour it.

Desk organizer.

We continue to present for you crafts from pipes in the photo. Using, pipes different size you can make a practical organizer. In such an organizer you can put everything that is lying around in your house idle.

Creative frame.

Sometimes after plumbing work people have a large number of cut pipes of different sizes. So there is no need to get rid of them. Using glue and personal imagination, you can make a wonderful frame. It is suitable for both mirror and volumetric photography.

Support for flowers.

The next craft can be installed not only on the street, but also in the house. Connecting the pipes together is not difficult. As a result, the product will turn out to be stable and attractive.

Pipe pots.

Various crafts can be made from sewer pipes. In particular, it may be pots for indoor plants.

Flowerpots from pipes.

The polypropylene pipe will excellent vase. And in order to decorate it, you need some kind of colorful photograph, which is glued on top and processed.

Chair with your own hands.

This article has already given plenty of photos of crafts from pvc pipes. But it is worth mentioning that a chair can be made from this material. The chairs can different types. It can be: adults and children. You can take them with you while hiking or fishing.

Greenhouse for the garden.

Greenhouse small size can always appear at your dacha. Pipes are simply knocked into a rectangle and covered with a film.

Summing up

Of course, this is not all crafts. You can see other ideas as well. In any case, each product will be extremely interesting to make.

PVC pipes are the best option not only for plumbing, but also for making DIY crafts. How often does it happen after repairs that there are several segments that are a pity to throw away, and so they lie at home or in the country and wait in the wings? This situation is familiar to many, so we free up space and create original crafts from pipes for your home and site.

Pipe connection options

Plastic pipes are a generic name for products for creating a plumbing, sewerage and heating system, which are made from various polymers, most often PVC or polypropylene. Such pipes differ in a lot of advantages, including high strength, lightness, durability, safety and ease of maintenance.

In order to carry out crafts of such a plan, it is important to know how to connect their individual parts to form the intended design. Polypropylene pipes interconnected with welding machine, which is expensive, so the best option will be his rent. But you still need to learn how to work with such a device, so fittings are more often used for these purposes.

If we talk about plastic pipes, then most often they mean PVC products, which are connected by such options:

After familiarizing yourself with the technology of connecting plastic pipes, you can perform any craft. It is only important to initially draw a sketch of what you want to get in the end, indicating all the dimensions and design elements of the craft.

You can create yourself from pipes unique crafts, which will delight the owner with their appearance and practicality, and to a greater extent surprise guests.

Organizer

This craft is the most in a simple way use plastic pipes. If there are only small pipe cuts, then they will fit perfectly into the overall idea. To make a mobile organizer, you just need to glue pipe sections of the right size together in the intended sequence and decorate the structure. This storage option will always keep workplace in order.

The second option for a craft organizer is a stationary one. In this case, the craft blank is mounted on a horizontal surface or wall. This is how you get niches for various little things, created with your own hands from pipes.

Frame or room divider

If there is a desire to decorate the wall of the house with a mirror, but it does not have a suitable frame, it is not necessary to spend money on buying a new one. To perform, you will need to cut pipes of different diameters into thin rings. On paper, you need to draw a layout of the future craft in real size and collect it directly on it from pipe scraps. You can create both a strict geometric frame and a set of randomly scattered rings. As a result, the resulting pipe craft can be painted in the desired shade or decorated, depending on the owner's imagination.

Thus, it is easy to create a decorative partition from pipes, which can decorate not only the interior of the house, but also suburban area. Efforts, of course, will have to make more, but they are worth it.

Shoe rack or wine rack

The situation with a bunch of shoes in the corner of the hallway is familiar to many, but there is not always a place to install a full-fledged shoe cabinet. In this case, you can dream up and make a craft-shoe rack made of plastic pipes. To do this, you will need to take pieces of pipe with a diameter sufficient to fit a pair of shoes, and cut them into pieces about 30 cm long.

Important! It is best to connect the components of the craft with self-tapping screws, so that the design is as reliable and durable as possible.

The assembled product must be fixed on the wall to prevent falling. This shoe is compact and appearance no worse than store-bought shoe organizers.

This technology can be applied to the construction of bathroom shelves, a wine bottle holder and even a place to place children's toys.

Vases and planters

From scraps of sewer pipes, you can make craft pots that are perfect for planting flowers in them and placing them in a summer cottage. If you first attach the bottom to the blanks, for example, from a plastic bucket, or simply provide them with a stand, then you can even put such pots indoors.

Crafts-vases made of pipes of small diameter look stylish. When placing several blanks of different heights, decorated using the decoupage technique, you get a spectacular place for cut plants.

Stands and shelves

If country house or a garage needs to be equipped, then the creation of PVC pipe shelves will be an excellent alternative to buying massive wooden products. To form this kind of crafts from pipes, you will need to connect the segments in a certain sequence.

So, snake-shaped shelves are suitable for storing books and photo albums. It is also convenient to hang clothes or towels on them.

Crafts-stands for flowers look no less creative. In the process of manufacturing Special attention is given to the places of fixing parts to each other and the reliability of the structure. You will also additionally need pieces of plywood or other material to make countertops in fake pipes.

garden arch

Such products, entwined with plants, look sophisticated and elegant on the site. They are able to decorate even any celebration. For example, if you decorate such an arch with satin ribbons, flowers, tulle, then this will be an excellent decoration for an outdoor wedding ceremony or photo shoot. And making crafts does not take much time.

There are many options for arches, so the design of the craft is selected in accordance with the wishes of the master. The main difficulty in the formation of this craft is the need to bend some parts of the pipes. The easiest way to do this is to slightly heat the desired section of the pipe with a gas burner.

If this is not possible, then the connection of pipes for crafts is carried out simply at an angle. In this case, a trapezoid or a triangle is formed. They make an arch with two vaults so that there are transverse elements between them, which during operation will help the greenery to be distributed over the entire surface of this craft.

Alcove

Not only small products can be made from pipes. For example, a gazebo from this material will become great option rest area additions. To do this, you need to take long segments, form arcs from them and fix them in the ground. A dense awning fabric is stretched between them as a roof, and in the interior space to install dinner table or a bench to rest. Like this, without extra costs time and finances, you can create a masterpiece gazebo that will save you from the summer heat.

Advice! You can connect the elements of the craft so that you get a house. It is too interesting option large crafts made of PVC pipes.

Plant containers

If the summer cottage does not have a sufficient area, then vertical plantings are the best option saving space. In this way, it is easy to grow greens, flowers, and even some varieties of berries.

To do this, you need to form a semblance of oblong flower pots from sewer pipes. You can get them by making holes along the craft and leaving enough space for the soil and plants. At the bottom of each craft, holes are made for the outflow of water. It is convenient to attach such planters to a pre-prepared wooden stand, directly on the wall or on the fence. If you connect these beds with a thick rope, you get a single structure that can simply be hung.

Lamp

For modern interiors interesting crafts that are made by hand are suitable. One of these interior details can be a lamp made of plastic pipes. The product can be completely different shape, the main thing - correct connection and the ability to connect electricity for crafts. It is worth taking on the formation of such crafts only if you have skills in working with electricity.

It is not even necessary to connect the elements of the craft with each other. If you take pipe sections of different lengths and cut holes of different configurations on them, you get unique lamp, which will leave fancy patterns on the walls.

Coffee table

If you want to arrange a garden area or update the furniture of the veranda, plastic pipes can also become the base material. Craft coffee table of them is easy. First of all, they draw a draft of the future crafts and, following it, form the frame of the table. It can be different, both assembled from many parts, and representing several segments mounted on a stand.

As a countertop for crafts, as a rule, glass or a sheet of plywood is used. Decorate it as you wish. The glass top looks spectacular and stylish, but it will need to be additionally fixed to the frame.

Conclusion

Crafts from pipes are in a unique way design not only suburban area but even at home. There are many interesting ideas worthy of attention. If you spend a little time and effort, you can get almost any thing out of plastic plumbing or sewer products.