How to install an accordion door. Accordion door - installation principles and step-by-step assembly instructions Installing an accordion plastic sliding door

Making repairs in their own apartment, many have to solve a rather urgent problem - to optimize the space. This issue is especially relevant for those who live in small rooms, where truly every square centimeter counts.

A sliding interior door in this sense is quite an excellent solution - after all, it does not need a lot of space to open, but at the same time it performs all the main functions quite well. In this regard, many citizens who want to save money on craftsmen are interested in: how do you install an accordion door with your own hands? This article is devoted to this topic.

What materials are used for the manufacture of accordion doors

It should be noted, among other things, that in general this type of door requires the use of materials as light as possible. These include, in particular:

aluminum;
plastic.

Each of the above materials has its own advantages and disadvantages. Yes, MDF

does not tolerate scratches;
high humidity;
Easily deformed if stored incorrectly.

On the other hand, soundproofing is much better.

From plastic products are obtained:

very light;
well cleaned of dirt;
serve for a long time.

But sounds pass through them almost unhindered.

According to the masters, with the latter option during installation, you have to suffer much less. The individual elements are easy to fit and connect. Finished doors are easily adjustable. Subsequently, repairing them is quite simple, if the destruction of the main structural elements has not occurred. However, in the latter case, you will need to change the canvas completely - this is another serious drawback of the model in question.

MDF is a relatively heavy material, which is why the accordion door often jams. In this case, the whole structure requires reliable fasteners and careful alignment. Ignoring these requirements leads to a quick failure of the product.

Be that as it may, a folding door of this design is installed quite easily. However, it would be better to call another person for help - so the work will go faster.

Equipment and tools

All necessary details for fastening doors are sold with it. You will have to buy separately:

box;
extras;
platbands.

At the same time, the thickness of the box elements must be sufficient (at least 1.5 centimeters), because this is necessary so that it can withstand the weight of the folding canvas itself. You will need a number of tools to get the job done. Their list is as follows:

hammer drill (or impact drill):
roulette;
spirit level;
plumb;
hacksaw (with a saw for wood);
miter box (for correct cuts);
joiner's square;
mounting foam;
wooden bars.

Preparatory work

First of all, you need to prepare an opening. The old door is dismantled along with the box. The walls, lintel and base are cleaned of sealant and mortar. Measure its "clean" dimensions. Get the right door for them.

It is worth noting that they are manufactured according to the standards existing in the country, so choose desired option It will not be difficult if you made your opening based on them.

First of all, assemble the box. As you know, interior doors are now made without thresholds - for this reason, the available flooring no need to touch. True, sometimes it happens that an old type product, delivered back in Soviet times, is dismantled. Here you will have to close up the resulting recess.

The vertical elements of the box are attached to the upper crossbar with self-tapping screws, directly at the ends. The box made in this way in the shape of the letter "P" is installed in the opening. There it is fixed with pieces of a bar, leveled and finally fixed with anchor dowels. Two pieces are required at the top, 3 on the sides.

How to do the installation correctly

The kit should have a part called a guide - this is a special profile along which the vertical strips that make up the accordion will move. It is extremely important to accurately measure and trim its excess part. In order not to make a mistake, you need a miter box. With this device, the sawing angle will be perfectly even.

Similarly adjusted to existing dimensions and that profile, due to which the deaf part of the folding is attached tightly to the box. It is simply put in place and the cut point is marked. In the upper element, you will also need to make holes for screws with a pitch length of up to 7 centimeters. On the vertical distance is already up to 20 cm.

Canvas assembly

Some manufacturers supply the door itself already assembled. It would be more expedient to choose such an option for yourself - this will save a lot of time.

If you have to collect, then you need everything vertical plates that make up the canvas, connect with each other with special rods. Next you will need:

install a panel with a lock (on the right);
fixing vertical bar (left);
install runners;
install a magnetic lock.

All the necessary drawings are included in the door kit, it is advisable to read them carefully so as not to be mistaken.

The MDF product is assembled a little differently. Vertical strips are connected at such doors with a long pin - it is required to carefully string all the elements onto it through the holes in them. Only after the canvas itself is assembled, you can begin the installation of rollers and other fittings.

Installation

The fully assembled door leaf is connected to the guide and installed in the center of the opening when folded. The profile is fixed on the box with screws through previously prepared holes. After the installation is completed, you should check whether the door moves easily enough and whether it fits snugly against the box.

The last thing left to do is install the platbands. They will allow you to hide traces of installation and add a finished and elegant look to the whole structure. Planks are cut from above at an oblique angle (45 degrees). Then they are attached to the box with special carnations without hats or glue.

You can learn more about the installation process by watching this video:

The main idea of almost any design solution in terms of decorating an apartment or house, this is the division of rooms among themselves and the formation of separate compositions inside each. Interior doors are naturally the most important element of space division. Now the conversation will be about how the installation of the accordion door is carried out with your own hands.

Until recently, this type of door was associated by most with a cheap option for those situations where in a small amount of housing it is necessary to save and save every square meter space. IN modern form accordion sliding doors are already a separate design element, and not a forced compromise. On sale there are many different variations of accordion doors with a wide variety of design styles. The basis for such doors can be both PVC and MDF strips. Differences at first glance are not even so obvious. In both cases appearance door appears pleasant and harmonious.

Plastic is naturally much lighter and less prone to both damage and contamination. It cleans up easily and can last a long time. The downside can be called again its somewhat excessive lightness. After all, when using such a door, there is a certain feeling of its fragility. However, recent PVC options lamellas are made with a more thoughtful system of stiffeners, so they only seem flimsy. In terms of installation, plastic accordion doors are somewhat easier. Firstly, the elements of the door are very simply snapped together by hand and easily adjusted in size to the required dimensions of the doorway. Secondly, setting up such doors is much easier, as well as correcting possible flaws during the installation process.

MDF doors are already much more massive, and this affects the usability. This does not add any difficulties in opening and closing, but the sound insulation and stability of the door are clearly better than in the case of plastic. The installation of such doors is complicated mainly by the weight of the door and the need to strictly observe all levels and markings during installation. Among other things, MDF accordion doors should be fixed much better.

What is required to install the door?

Doors are on sale with all necessary set of spare parts and fastenings. In quality products, there are always several spare strips for the possibility of increasing the width of the door.

typical equipment sliding door-accordions.

From the materials it is also necessary to purchase and prepare everything necessary to prepare the doorway itself. For this, any suitable extensions and platbands are suitable. It is only important that the thickness of the material is at least 15 mm in order to withstand the weight of the door and, accordingly, all loads during operation.

From the tool and building materials you will need the following:

hammer drill;
puncher (in case you need to expand the existing doorway);
roulette;
plumb and bubble level;
building corner;
hacksaw;
miter box;
bars or wooden bowls;
polyurethane mounting foam.

Preparing the doorway

You can, of course, mount an accordion door inside the existing door frame. However, this will significantly reduce the useful width of the opening. It is best to dismantle completely old door together with the box and knock down the solution under them down to the base ( brickwork or concrete wall). After that, you can measure the resulting opening and check the list of nominal door sizes with a different number of elements. Such a list is attached to the instructions for the door. It is only important to take into account the width of the extensions. As a result, it becomes clear: is it necessary to expand the opening somewhat or, conversely, with the help of extensions, polyurethane foam and bars to reduce the dimensions to the required parameter.

Harvested extensions are cut to form a box without a nut. Wherein top bar fastened with ends to the upper edge of the vertical extensions and fastened with self-tapping screws.

Important: In order not to damage the material, you should first drill holes at the installation site of the self-tapping screw with a drill of a smaller diameter (2 mm) and only then screw in the self-tapping screws.

After the box is ready, it can be inserted into the doorway and secured with the help of bars and other wooden substrates as wedges. For reliability, it is better to use several bars equal in width to the doorway, form spacers in the center and along the bottom edge so that the extensions do not sag during installation. To fix the extensions to the wall, long anchors are used, installed three on each side and at least two on top.

As soon as the anchors are twisted, you can foam the gap between the extensions and the wall. After the foam has dried, you can proceed directly to the installation of the accordion sliding door.

Installing guides

In order not to make mistakes in the calculations, it is better to start with the installation of guides and other fasteners. As part of a set of accordion door parts, there is a guide profile. According to the instructions, the required length of the profile is measured and the excess is cut off. It is advisable to use a miter box so that the cut is perfectly even.

In the same way, according to the instructions, the profile for fastening the blind part of the door is cut off and the counter from the side of the handle of the future door. After that, we check all the dimensions, but only by attaching the profile, without fixing them. Holes for self-tapping screws are pre-drilled in the profiles. In the upper profile for every 5-7 cm, and on the side profiles, holes with a diameter of 3 mm are drilled every 15-20 cm.

If the profile is designed for fastening with special clips, then you can already proceed with the installation of clips around the perimeter of the doorway. Usually, the same clips are used for the upper guide (rails) and the profile on which the blind part will be attached door leaf harmonicas. From the side where the finishing groove and the magnetic lock will be installed, slightly different smaller clips are used.

The top guide should be strengthened so that the clips are spaced approximately 5-7 cm apart. On the sides, you can limit yourself to installing only 4 or 5 clips evenly in height.

Assembly of the door leaf and mounting of rollers

All strips that will make up the door leaf should be cut so that they fit in height. This takes into account the margin for the roller system from above, which is inserted into the rail. A ventilation gap of approximately 7-10 mm should remain at the bottom of the door, as is the case with any interior door.

How to assemble an accordion door is described in detail in the instructions that came with it from the manufacturer. It is very important to observe all the necessary assembly points, because different manufacturers have their own design features.

IN simple version plastic strips door leaf are connected directly using grooves or using additional gaskets. In this case, the two parts to be joined are displaced and connected by the edges, after which one part is pulled along the second to the end.

In the case of MDF, a method is often used in which the strips are connected using a long axis, which is threaded alternately through the lugs on each of their parts.

After all the elements are connected and the door leaf is completely assembled, you should place the rollers and other accessories that come with the kit. As in the previous case, everything is done strictly according to the instructions.

Final assembly and fixing

Now it remains only to install the folding interior accordion door inside the prepared doorway. The door leaf is threaded by rollers into the guide profile. When all elements are inserted, the door is folded and placed in the center of the profile. In this state, it is most convenient to install the guide in doorway.

final view of a typical accordion door assembly

In the case of using clips, the guide snaps onto them. Used if necessary rubber mallet for a tight fit. In other versions, self-tapping screws are used, which first fasten the rail along the edges, and then along the entire length every 5-7 cm.

The next step is to attach the side profiles, and the blind part of the door leaf is fixed to the corresponding profile. At this stage, the ease of movement of the door and the tightness of its fit to the counter profile from the side of the handle are checked.

If everything is fine, then the handle is installed. In the closed state of the door, the location of the counterpart of the lock is marked and the latch with a magnet is screwed onto the door frame.

Completion of works

When everything is finally fixed and checked, you can proceed with the installation of trim around the perimeter of the doorway on both sides. With the help of a hacksaw and wort, the excess parts of the architraves are cut off at an angle of 45 degrees, limiting them in length. Platbands can be attached both to liquid nails and to special furniture nails with hidden hats or without them at all.

Video: an example of installing an accordion door

Instructions on how to install an accordion door are of interest to people who decide to mount this popular design in their home. We will talk about the intricacies of installing such products with our own hands.

Such doors are classified as folding. Their canvas consists of several elements. When opened, it folds up and moves to the slope of the doorway along a special rail. When folded, the accordion takes up space (very little) in the opening, but it does not need additional space either on the wall or in the room. Similar are optimal for rooms with small footage. They are considered truly economical, and most importantly - simple and understandable to install with your own hands.

The panels of the considered doors are made of different materials. Harmonicas are made of leather, bamboo, mirrors and glass, chipboard and MDF. Less commonly, natural veneer and solid wood are used as elements of such door structures, which is associated with a relatively large mass of these materials. The composite "pieces" of the described doors are made from 10–12 cm panels, which are connected to each other with hinges. When using leather or fabric, the loops are replaced with lamellas. Their connection into a single structure is carried out by means of fabric inserts that are small in terms of rigidity.

Accordion doors from MDF

In one sash there may be a different number of panels. It all depends on the width of the doorway and the width individual element. IN residential buildings and apartments, as a rule, single-leaf structures are installed, in public buildings - double-leaf structures. You can change the width of the door at any time with your own hands by adding or removing the required number of panels.

The sash in accordions moves along the guide. It can be mounted at the bottom of the opening or at the top. The first option for the location of the guide is recognized as more reliable. But when placing it at the top, you can forget about the need to equip the threshold. In this case, it simply does not exist.

The correct movement and folding of the door is ensured by stoppers and fixing elements. They are mounted on hinges. Clamps and locking products are usually made of aluminum or steel. Such elements are very reliable and durable.

Structurally described products do not have a door frame. They are fixed, as you understand, in the ceiling or in the opening. If necessary, you can make platbands and racks for an accordion door with your own hands and mount them without difficulty. The main advantages of such structures include:

ease of installation with your own hands;
compactness - a 60-centimeter doorway is enough for mounting an accordion;
the ability to reduce or increase the width of the product in a matter of minutes.

All these "advantages" of folding doors determined the main scope of their use. Such designs are ideal for cramped hallways in city apartments, narrow corridors in residential buildings and similar premises. Often accordions are installed in bathrooms and kitchens. It is important to choose the right material from which the door panels are made. In this case, it is desirable to choose products made of glass or plastic. They are not afraid of steam and moisture.

Installing an accordion in the kitchen

For other rooms, you can purchase accordion doors from any materials. There are no restrictions. Also, the designs we are considering are often used as modern and elegant interior partitions. The accordion door is ideal for zoning large rooms. Moreover, at any time you have the opportunity to remove the sash to the door, if there is no need to divide the room into separate zones.

Accordions are most often installed to separate: a dressing niche from the main room; balcony combined view from the hall. Silent and lightweight folding doors are designed for such do-it-yourself zoning options for living quarters.

How to independently assemble and mount the door?

First you need to prepare an opening for installation door structure. Dismantle old box, carefully clean all gaps from debris, seal them with leveling mortars, and then carefully putty. After that, you need to measure the width and height of the doorway and level the floor. It must be absolutely even, since only in this case is guaranteed smooth and completely silent sliding of the doors during their operation.

Now we can assemble and install the structure of interest to us with our own hands, guided by the diagram below:

Mount and secure the upper rail in the doorway. You may need to make new holes for the fasteners and cut off the extra centimeters of the accordion if its width is greater than the width of the opening. It is not difficult to shorten a steel or aluminum rail (if necessary) by cutting it to the required length with a hacksaw.
You decide in which direction our door will fold. On the opposite side, mount a latch into which you will need to insert the axis of the panel, called the lock. Also at this stage, it is necessary to insert a special door slider into the groove of the guide.
Attach the top axle to the panel mentioned above. Do the same with the bottom axle. At this stage of assembling the door, it is important to achieve absolute verticality of the structure (keep handy).
Install the receiving plate at the bottom of the opening.
Mount axes on every second panel in a row. Sometimes manufacturers of accordion doors do not make holes for these purposes on the accordion elements, you will have to drill them with a drill yourself.
Place the panels in the desired sequence (as they will be installed in the finished door) and put the points where you put the hinges. They need to be mounted at the same distance from each other in three pieces.
Connect all panels in general design, leaving a 3 mm gap between the individual elements.
Bet door handle on the lock panel.

Now you just need to lift the assembled canvas and insert metal axles into the landing plates. The accordion door is ready! If you want, you can install extensions and platbands. But remember that in most cases these elements are not included as standard with a folding door structure. They need to be purchased separately.

In this article, we will look at how to make and install an accordion door with your own hands. The accordion door is an interior sliding folding door (or a book door if it has two slats). Here you will see step by step instructions with detailed master classes, as well as clear drawings and layouts. We will pay special attention to the installation of a folding door in order to disassemble how to properly place all the elements in order to carry out installation.

Article menu:

So, in this same publication, I will tell you about one specific type of wooden interior door, namely, a folding accordion door.

I will say right away - this version of the door, as they say, is not for everyone, and is not suitable for everyone and not in any room, it's all about the complexity of installation and poor insulation. But, of course, the folding accordion door has its positive aspects, for example, it allows you to save enough space and is easy to open. Many people believe that, in order to save Money, it’s better to buy such a door in a disassembled state and do the installation yourself, they say “it’s cheaper this way” since you don’t have to pay for installation ... such an opinion is WRONG. I’ll explain why: the whole point is that by refusing to install a door, you really save, but not much, since you still have to overpay for already finished door, the design of which, by the way, is very simple and easy to do with your own hands! So you will not only save money, but also enjoy the creation process! “But how to make a folding accordion door, or as it is also called a “door-book,” with your own hands,” you ask. Very simple! So that you can easily and quickly create your own folding door, I am writing this article now!

Accordion door and book door.
What is the difference???

Door-book mechanism

The diagram below shows the mechanism of an interior folding door with two slats. Also on this drawing you can see the required hardware and its location when creating a door.

Photo source: www.ekb.rusdver.net/findings/00000426-mehanizm_dver-knizhka.html

Folding door installation diagram

The drawing below shows schematically the principle of installing a folding booklet door and its parts. So to say "what-where" !!!

Photo source: atlant66.ru/produkciya/dveri-spec/mehanizm_rezident_sdk-01_dlya_dverey_knizhka/

A simple accordion door installation plan

This collage sequentially shows us the process of installing a folding door in the opening.

And so let's look at the installation in more detail using an example:

How to install an accordion door with your own hands.

(photos, video master class)

It is somehow too easy to create a door leaf for a folding accordion interior door, agree? There must be some trick to this door. Let's think about this door:

Convenient to use;
Easy to create;
Compact, you save a lot of free space;

Besides:

Creating a door leaf does not take much time;
Any materials can be used for this purpose;
The design of such a door will suit almost any interior.

Some pluses, except for low strength and poor heat and sound insulation, but it generally depends on what materials you choose and how to install this door so that might be fine too. So what's the catch anyway?

And the catch, just the same, is to install this type of door with your own hands. If you read the article "Do-it-yourself sliding door", then, for sure, you should understand how difficult it is to install interior doors sliding type. So, installing an accordion door (or a book door, call it what you want, the meaning still remains the same) is even more difficult. Therefore, it is this stage of creating your own folding interior door with your own hands that deserves a separate, special attention. Let's take a closer look at all the stages and nuances of installing this type of door. Again, I will draw a parallel for those who read the article “Do-it-yourself sliding door”, in this article you will find enough matches in the installation steps, because these types of doors are, one might say, related and are based on sliding mechanism. Okay, without extra words, let's move on to the installation itself.

Step-by-step photo installation master class:

(Just click on any photo to view the gallery)

Photo source and link to video tutorial: https://youtu.be/XuQEeVSaIyk
Video by bandq
Título original: How to fit an internal bi-fold door

Watch the video master class:

Photo source: http://www.dveripetli.ru/cistema-skladnyh-dverey

Accordion door leaf design

Concealed and hinged butterfly for accordion door

If you manage to find such hinges in the hardware store, then your door will close with special grace.

Pros:

If you choose from two types of loops, then it is better to put hidden ones. In the open state, they almost do not leave a gap between the canvases. In addition, they are more powerful, can withstand solid loads.

Minuses:

Their disadvantages: more difficult to install and high cost. But if the doors are made of MDF or solid wood, then you need to install them. "Butterflies" will fit a light door leaf or where it is not possible to make significant recesses under the body of a hidden hinge.

Name of accordion door construction elements

Do-it-yourself installation of folding interior doors.

If you buy an accordion folding interior door in a store, then you will probably be advised to pay extra for the installation of these doors, saying “this will be better, trust this business to professionals”, do not believe this, it will probably be faster, three times more expensive, but no better quality. Installing a door-book is quite within the power of an ordinary mortal person who does not know anything at all about the “correct” installation of folding doors. And if you are exactly the person I am talking about, congratulations, you will be able to cope with this task, and this and subsequent fragments of the article will help you, just in such a case.

Although the installation of both folding and sliding doors does not require the creation of a door frame, you should still think about how to arrange doorway. After all, there can't be bare walls between rooms. For example, a doorway can be plastered and painted, or wallpapered, but most often a decorative false box is used for these purposes. This is a kind of imitation of a real door frame, which performs a purely decorative role and is not intended for anything else, that is, the door CANNOT be hung on such a frame. And it is a box of boards fastened together with screws, installed in the opening.

Photo source: stroyday.ru/ (photo of false box assembly)

Accordingly, you need to start the installation with the creation of such a “door frame”, and before you create it, you need to carefully measure the parameters of the doorway itself (wall thickness, height and width of the opening). I will talk about the next steps later in the article.

https://youtu.be/bVREAzQTNhg
Título original: How to Install Folding Doors and Bi Fold Doors
Video by: DIY Doctor

Watch the video master class:

Do-it-yourself folding door installation steps.

(photos, instruction, video master class)

So let's take an example specific model Let's analyze the stages of installing a folding interior door, and, of course, a video master class will help us in this! In the last fragment of the article, I told you that it is best to create a decorative false box for a sliding or folding door, but I also mentioned other methods of decorating the doorway. In this case, just, the creator of this model did not use the imitation of the door frame, but simply painted the plastered doorway. Well, let's say you have properly prepared the doorway for installation, and you can already move on to the next step. And the next stage is the installation of the guide. If you bought the door disassembled in the store, then the kit will include a guide, but in the same case, when you completely and completely make the door yourself, you can do the following: buy an aluminum guide and a kit for installing a folding door separately, believe me, Thus, it will be possible to save much more money than when buying dismantled doors.

To install the guide, you must first measure the width of the doorway. And here the first distinguishing feature from the installation already appears sliding door compartment. The guide for a folding door is installed not above the doorway, but inside it, therefore, if you created a decorative box, you will have to take into account its dimensions so as not to be mistaken. Then, after you have made the guide of the required dimensions, drill several holes in it and fix it in the opening with one screw, in the middle of the guide (this must be done so that you can then insert the door leaf into the guide) is ready, the first part is done.

Step by step master class

Source photo and video master class: https://youtu.be/RYONGEDsjRM
original name: accordion door installation
Video by: Natalya Pukhovskaya

Watch the video master class:

We cannot confirm the authenticity of this drawing. Most likely it reflects a variety of only one type of folding doors. And the list of types of doors is quite limited.

From different materials

Folding accordion doors, like book doors, can be made from different materials. Let's take a look at them in the photo galleries below.

Accordion door made of natural wood

Natural wood. Durable material, subject to its competent processing: the wood is impregnated with an antiseptic, covered with stain and varnish. Over time, the coating is updated. The door made of this material is unstable to moisture changes.

MDF accordion door

MDF. The most stable material, not subject to the destructive effects of fungus and mold. Compared to chipboard, the material is more suitable for the manufacture of doors complex design. Chipboard is strong enough, lightweight, environmentally friendly, moisture resistant and fireproof.

Accordion door made of chipboard

Chipboard. Cheap, as it is a sheet of glued sawdust. A door made of such material will turn out to be flimsy. Since it consists of sawdust pressed and glued together, the screws do not hold very tightly in it. The advantage of the material is good heat and sound insulation, however, the design of the accordion door does not allow the material to show these qualities in full. Chipboard also has high moisture resistance and bioresistance, but still it is far from the best option for folding doors.

Plastic accordion door

Plastic. Cheap, wear-resistant and water-resistant material. Ideal for a shower stall. It is easy to process, does not give chips, scratches and cracks, does not dry out. For interior doors, plastic with a pattern is usually used: wood-like, wall-colored, etc.

How to install the door leaf of a folding interior door on the rail.

(photos, instruction, video master class)

So, let's assume that you have prepared the doorway, installed the guide and are ready to install the door leaf. Well, then let's not delay, let's start the installation right now!

First, check if everything corresponds to the required size, if so, then excellent.
It is necessary to install rollers on the door leaf - the main part of the moving mechanism, by the way, here is another difference between a folding accordion interior door and a sliding sliding door: the rollers are not located vertically, but horizontally, relative to the ground, so they move along the walls guide, in addition, respectively, the rotating axis is directed in the other direction, and, in addition, the rollers also have a rotary roller assembly, it is needed so that the door can be folded.
Otherwise, the steps are the same as for installing a sliding door, that is, to the upper end of the door leaf, one roller is installed on two parts of it. After the rollers are installed, you need to install the lower axis, on which one part of the door leaf will be attached. Now you can insert the rollers into the guide.

Every year folding doors become more and more popular. They are completed country houses and apartments, offices and utility rooms. This is because folding structures have the following advantages:

Possibility to save space. They can be folded at any time, so they practically do not occupy usable space.
Simple mechanism. Accordion doors include panels, fasteners and guide profiles. You can collect them yourself. Needs for use building materials and holding finishing works No.
Versatility. There are no restrictions on the number of panels. The only thing that should be guided by is ease of use. After all, too bulky structures are difficult to use.

Among the shortcomings that are inherent in the accordion door, there are:

Low level of sound insulation.
Short term use. This is due to the fact that the composition includes moving parts, which wear out due to frequent use.
The need for frequent repairs. Folding mechanisms periodically jam. Most often this happens if too many are selected. big sizes interior door accordion.

To operate folding doors longer, it is necessary to carefully select the model.

The folding door system includes a set of lamellas, presented in the form of a leaf or with glass inserts, guide profiles and hinges. To simplify the process of moving, rollers are introduced into the composition, which are located on the outer wings. They move along the profiles at the moment of opening and folding the structure. The rollers are supplemented with bearings made of high-quality raw materials. Therefore, the opening and closing process is completely silent.

Varieties of folding doors

Folding interior doors are classified according to two parameters:

materials used for the manufacture;
decor.

For the manufacture of folding structures, wood, reinforced glass and plastic are used. Each option has its own characteristics and strengths.

Wood accordion door

Demand wooden doors the harmonica is high, because the designs are distinguished by reliability and duration of use. All elements from are treated with impregnations and chemicals. The hinges included in the composition are made of alloys with a certain margin of safety. Do not provoke deformation of elements from wood and temperature fluctuations.

Before installing folding wood structures in the kitchen, you need to check the degree of their protection. If the main elements are processed with a low-quality composition, then under the influence of moisture they will begin to deform.

Plastic door accordion

The constant load on the plastic panels helps to reduce the lifespan. With moderate use, the service life plastic doors the accordion reaches 10-12 months. The main advantage of this design is low cost. Plastic folding doors can be used as a partition.

Glass accordion door

Folding glass is rarely used to make the base for an accordion door, since its integrity is easy to break. The cost of glass models is many times higher than the cost of analogues made of wood or plastic. To reduce the cost, manufacturers combine glass with other materials, which also contributes to the strengthening of the structure. Glass doors decorate using special films, varnishes or sandblasting equipment.

Model selection features

Since the range of folding doors is huge, it is sometimes difficult to navigate. You can simplify the process if you follow the following rules when choosing a model:

Stages of installation of an accordion door

Before assembling the accordion door, you need to check the complete set. The following items must be available:

guide profile (their number depends on the selected door model).
fixture.
lamellas.
rollers.
adjusting key.

Manufacturers do not include platbands in the kit, so they should be purchased immediately.

Before you buy an accordion door, you need to take measurements. This will make it possible to purchase a model with the required characteristics.

Installation of a folding interior door consists of several stages. It is important to follow their order.

Preparation and fastening of the guide. If necessary, prepare additional holes for fasteners. The distance between the holes should be 25-30 cm.
Panel installation. On the one hand, the guide profile is supplemented with a latch, on which the end of the panel and the roller are inserted. Then the guide is fixed.
Door leaf assembly. To connect the structure together, holes are formed on the panels and fastening loops are installed in them. The lamellas are arranged in the order in which they will be installed. To simplify the first and last panel mark. The distance between the panels should be 3-4 mm. Before installing the fasteners, the mechanism for the accordion door is checked again to prevent displacement.
Canvas installation. The panels assembled in the form of an accordion are folded and placed in the grooves of the guide. Be sure to check and correct their position. This process is carried out using the adjusting key.

After installation, the operation of the roller mechanism for accordion doors is checked. If necessary, dismantle, correct errors and re-fix the door leaf.

During the installation of the door leaf, it is necessary to be guided not only general recommendations. Each model is accompanied by instructions in which manufacturers describe in detail the process of assembly, fastening and installation.