Installing a screen under the bath is a great way to complete the room and hide plumbing communications. And to save money and fit the screen perfectly into the interior of the bathroom, do it yourself!
How to make a screen under the bath with your own hands?
Even in the most stylish and tidy bathroom, a bathtub installed without a screen does not look very elegant. It is worth considering how to decorate the space under it, while maintaining functionality and without blocking access to plumbing communications.
The most versatile way out can be the construction of a screen under the bath. And if you want to get a unique interior detail, discard the finished screen and make it yourself.
The choice of material for the construction of the screen
The most popular and easily manufactured screens are plastic. They are durable, not afraid of moisture. You can make a screen of multi-colored plastic to match the interior or paste over it with a special film.
When creating a screen for a bath, it is important to carefully calculate and think through everything. Therefore, the first thing to do is to choose.
The second stage will be familiarization with the cost of laying tiles in the bathroom. This is necessary in order to decide whether it is worth starting work on your own. .
The second most popular is a screen made of MDF panels.
In this case, it is necessary to take into account that MDF is afraid of dampness, and therefore it is necessary to treat the panel with a special compound before installation.
Plasterboard screens are usually installed by those who do not intend to use the space under the bathroom as storage.
Such a screen must be equipped with a door in order to gain access to plumbing equipment if necessary.
load-bearing frame
Almost every screen requires the construction of a frame on which the panels will be attached. It can be made from wooden or aluminum profiles with various parameters -25 × 25, 30 × 30, 40 × 40.
Before starting work, be sure to mark the walls and floor to accurately mark the lines along which the screen will be installed. To strengthen the frame, it is necessary to install transverse profiles.
They will give rigidity to the whole structure. After that, the profiles are joined together and attached to the walls and floor of the bathroom.
Brick screen laying
One of the very stylish and original variants- brick screen with subsequent finishing tiles or decorative plaster. It's pretty easy to make your own.
Before starting work, you will also need to mark the future wall of the screen so that its edge is flush with the edge of the bath.
On the opposite wall of the bathroom, you also need to make vertical markings, which will be a guide when laying bricks. It is recommended to lay 1/2 or 1/4 bricks on cement-sand mortar.
You can make a screen with a niche for the legs. Be sure to provide a door for access to the drain and plumbing communications!
You can buy it in a store or make it yourself from a plastic panel or other available materials.
Popular screen types
From plastic lining
This is the cheapest and easiest screen to manufacture and install. Plastic does not require additional finishing, so you can immediately use the bathroom, and if necessary, this design can be easily disassembled, opening access to the interior.
Before starting the installation, you need to stock up on everything you need: in addition to the panels, you will also need a starting profile, which is reinforced around the perimeter of the screen.
So that the plastic does not bend over time and does not lose its shape, you need to additionally strengthen the frame with a profile in the middle of the structure.
The lower part of the profile is glued to the floor with a sealant.
The lining strips are cut with a construction knife and inserted into the starting profile. Where the door is planned, you need to cut a hole in advance.
Video: Decorative screen
Plasterboard sheathing
Installation requires special plasterboard for rooms with high humidity to prevent it from soaking and rotting.
The drywall option is good because it can be designed as a niche with shelves, so that in a small room of a typical bathroom it will successfully replace a wardrobe or chest of drawers.
It consists of drywall sheets mounted on a frame made of metal profile or wooden bars. You can install the frame on one side of the bath or on both sides at once - it all depends on how the bath itself is located.
By the way, the amount of materials needed depends on this.
For the manufacture of the screen you will need: drywall, putty, drywall profile, sealants and impregnations, paint.
Work begins with the layout of the future frame. After that, a frame is assembled from a profile, depending on the shape of the screen, and installed under the bathroom using a drill and a screwdriver.
First, a smaller part of the structure is attached, then a large one, and they are fastened together.
A technological hole is required. After fixing the sheets, the surface is treated with a sealant, puttied and coated with a primer.
After all layers have dried, you can start finishing work.
From ceramic tiles
Finishing ceramic tiles possible for screens made of drywall, MDF or brickwork. A putty is applied to a carefully primed surface, after drying it is carefully rubbed with sandpaper and primed again.
The tile is laid in the same way as usual, using special glue and crosses for joints and grout. The advantages of such a screen are its decorative effect and durability.
You can choose something completely unique. color combination and decorate the bathroom in any style. You can even make sliding doors, but it will be somewhat more complicated and costly.
MDF sheathing
MDF boards are afraid of moisture, so it is necessary to impregnate them with special sealants even before installation. After that, they are coated with a primer and fixed to the frame in the same way as drywall sheets.
To further protect the screen from exposure to moisture, special ventilation holes must be made on the side opposite the technological door.
Usually, a small slit is made for this purpose, 5-10 cm long and 2-3 cm wide. So that it does not catch the eye and does not violate general view, it can be closed with a decorative plastic grille. MDF screen trim can be made of tiles or plastic.
For acrylic bath
Acrylic tubs are more fragile than cast iron tubs and require extra care when installing the screen. The structure itself is usually made of PVC panels in the usual way, just like for a cast iron bath.
Before starting installation, you need to mark the side of the bathtub, marking the places where the screen will be fixed.
After that, the upper part is combined with the side of the bath and the same marks are applied to it, making sure that they coincide with the marks on the side.
The screen is attached to the bath using mounting studs and self-tapping screws.
To make the entry points of the screws invisible, it is recommended to close them with special plugs to match the bathtub. It is also possible to build a brick screen, but in this case, you must first build it, and then install a bath on it.
Before proceeding with the construction of the screen design for the bath, it is important to purchase a bath and, of course, a toilet. Great option for a combined bathroom -.
If you have a small bathroom at your disposal, do not be upset, we will help you choose the design of a small bathroom in Khrushchev, which you can learn more about.
PVC panel screen
For its manufacture, standard plastic panels, guide profiles - aluminum or plastic, square tube section 10 × 10 mm and self-tapping screws.
The first stage of work will be the manufacture of a frame of two parallel tubes connected across the same pipe. Vertical racks are placed depending on the size of the screen.
After painting, guides are installed on the pipes, one of them is attached to the lower frame, the other to the upper one. The panels must be carefully cut into pieces of the required size and inserted into the grooves of the guides.
Screen Shape
The screen under the bath, due to the characteristics of the room and the shape of the bath itself, is most often rectangular in shape. Exceptions are only screens for a corner bath, a curved design is provided here.
Depending on the material of manufacture, it may have some features and improvements.
For example, brick or drywall may have special niches for legs so that they do not rest against a blank wall.
The shape of such a niche can be straight or inclined. According to the method of opening, the screens can be sliding or hinged.
The second option is preferable, as it does not require additional space for the door.
Video: Manufacturing technology
sliding screen
A sliding screen is best made from PVC panels or plastic lining. These are the easiest materials to work with, and the screen from them is very durable.
Installation requires a special aluminum profile, guides for doors are made from it.
First of all, a frame is mounted, on which guides are installed, equal in length to the bath itself or to the distance between the walls of the room.
Doors are fixed in the frame, and they need to be located on the sides of the screen itself in the first profile groove. The central part is most often made fixed and is located in the middle groove.
The screen is attached to the bath already assembled using spacer bolts. Furniture handles are installed on the movable doors.
For corner bath
When creating a screen corner bath must take into account that traditional materials, such as drywall, it is not easy to bend on your own, and even more so to place it in a rigid frame.
The easiest way out is to make a screen made of plastic, it bends well, is not affected by moisture and is relatively inexpensive. In addition, you can choose plastic sheets a variety of shades.
Even minor, at first glance, details in the interior will help to make the appearance of any room complete, unique. And the same little things can completely spoil our impression. DIY sliding screen under the bath – a useful thing that can solve many small problems that spoil the mood.
Bath Screen Materials
- From MDF
- From PVC panels
- Acrylic
- Plexiglas
- Mirrored
- With ceramic tiles
- From tongue-and-groove slabs
- From drywall.
Screen design
These structures are also different. Products of standard length are produced: 1.5 or 1.7 meters. The height indicator is in the range of 560, 550, 506 millimeters. The product has special legs that allow you to adjust this characteristic.
- End screens - cover the corresponding part in the bathroom.
- Varieties where there are no end frames.
- Universal models. Plastic panels are enclosed in an aluminum frame. The length of the frame itself can be reduced if customers have such a desire. Thanks to this, more easy installation do-it-yourself structures become lighter where sewer pipes pass.
- Normal view. Plastic panels are enclosed inside the frame, the performers try to adhere to certain sizes.
About MDF structures
Most often, modern buyers make a choice in favor of plastic, but this does not mean that the choice is only limited to them. One of the most common materials is MDF board, which can resist even moisture in large quantities.
The material, at its core, is a type of fiberboard with average density. It is created using pressing technology when supported high temperature, pressure.
Compared to plastic, these models are more expensive. But on the other hand, the appearance can also be called more massive, impressive. It is best to choose the color and material so that they match the decor that is already present in the room.
Screens made of plastic and MDF are not moved apart by the same mechanisms. MDF products simply open inward, which is very reminiscent of ordinary furniture facades.
Differs in MDF and higher resistance to mechanical loads.
We install a screen made of wood - expensive and fashionable What sizes are the designs available in?
- 540 mm high, 1700 mm long
- 540+ 1600 mm
- 540+ 1500 millimeters.
All models have legs, thanks to which the height can be adjusted up to 620 mm.
Several color options are also available.
- Vanilla
- Olive
- White
- wenge
And these are just a few options for modern buyers.
Is it worth taking an acrylic screen?
These are models that are only suitable for rooms decorated in a certain style, having a certain appearance.
Such products are most often produced immediately complete with the bathrooms themselves.
For each model is developed truly unique decoration with a certain set of characteristics.
How can you do everything yourself?
From the very beginning, we need to understand the requirements that any sliding bath screen must meet.
- There should not be any support on this part near the bath itself. The product cannot play the role of a supporting structure.
- Near the screen, you will definitely need to take care of high-quality floor sealing.
- There must be a technical opening that allows, if necessary, access to all communications. To hide this part, it is allowed to use small doors or plugs.
We buy acrylic screen complete with bathtub Working with brick
It is necessary to lay it between the walls where the bath itself is located. The main thing is to withstand the thickness, it should be equal to half the brick. It is by this value that it is necessary to shift all subsequent rows. It remains only to change everything depending on the specified parameters.
It is important to make a special window where the drain will take place. In the future, just a door is attached there. small size. The bath should not be leaned even on brick screens, this is one of the most important rules. Between the last row of bricks and the bathroom itself, you will need to create a small gap. Usually it is no more than 1-2 millimeters, then it is covered mounting foam. After that, the brickwork is sheathed.
What about drywall?
One of the most good decisions. A timber beam or a metal profile is perfect for forming the main frame. True, if the choice is made specifically in favor of wood, it will be necessary to process the material with the help of soil. Otherwise, it will not be possible to completely protect yourself from mold and rot.
The frame requires a small recess, this should be taken into account separately when creating it with your own hands. The face material will then be on top of the skin. As for the thickness, it should be the same as that of this future skin. By this amount, it is necessary to deepen the entire structure later. Correction will help to carry out a plumb line.
We mount the drywall screen What other work can be done?
The UD profile is fixed along the outlined line. To prevent water from getting under the bath, it is necessary to process the lower part of the structure with a sealant.
CD - profile, which in any case must maintain a vertical position. Fastening takes place on the base profile. Between them you need to leave a certain distance, not less than 600 millimeters. Where the technological hole will be located, it is worth installing additional racks. It is better to provide a protrusion for the legs in the center.
The installation of the profile is carried out in the form of the letter P. It must be deepened under the bath, only 10 centimeters.
A moisture-resistant variety of drywall is best suited for finishing screen sheathing. The main thing is to observe the width and height of the structure, make a small margin of 2 cm.
Self-tapping screws are used when fastening along the perimeter and in the center of the profile, while it is important to observe a step of 15 cm. It is important to monitor the self-tapping screws, if handled carelessly, they can damage the bath. It is recommended to retreat 1 cm from the edge and the floor, then the drywall will not swell. This material is water resistant, but constant contact with moisture can be dangerous for him.
Tiles and foils can be used to prime the finished surface. This is one of last stages work. Decorative plaster is also suitable, many prefer washing wallpaper.
Are there other options available?
Working with drywall partitions is very similar to what can and should be done with OSB, MDF. The only difference is that in the latter case, an additional window is needed inside the screen, which will be responsible for ventilation. The main thing is that it should be located on the opposite side from the place where the technical hole will be located.
Length - within 5-10 centimeters, width - about 2-3. A plastic grill will help cover everything. On both sides it is necessary to cover the MDF sheets with a primer. And this must be done before the final fixing on the frame.
What features of the installation should you be aware of?
The screen fixture is easily mounted directly on the sides of the bath if it is acrylic. But this is unacceptable if you need to do everything under a cast iron bath. Otherwise, the enamel surface will deteriorate.
The complexity of installation usually depends on how complex design the screen itself. Installation of the guide profile in the shape of the letter W - mandatory requirement if a product with sliding doors is selected. After that, you need to cut out the details, which will be the doors in the future. One door must be larger than the other. Only after that they are installed in the guide profile.
Screen holder under cast iron bath DO NOT mount on the sides of the bath itself What about drywall construction?
The first step is to assemble a frame that matches the dimensions we need. You can not do without wooden bars 40 by 40 millimeters, screws and metal corners.
- Markup is the first important step. A plumb line is used to apply the required number of points to the surface. Then they are connected in single lines, usually going to the floor from the corners of the bath. There should be two such lines.
- It is necessary to retreat 2.5 cm from each of the drawn lines. And draw one more parallel to the previous ones. But they will move inside the bath. Points for drawing lines on the floor are marked in much the same way as they are used. We get 4 lines.
- The plumb line must be applied to outside corner baths, which is not adjacent to them. After that, another point is placed on the floor. This is the top of a square whose side is 2.5 centimeters. It is turned inside the bath.
- Several lines will need to be drawn from the corner of the square facing the bath. They are connected to those lines that were described in paragraph two.
- For the vertical sides of the square, you will need four of them. The length will be equal to the distance from the floor to the lower edge of the side of the bath.
- On the shorter side of the bathtub, two are needed for the frame.
- Finally, on one long side, you will need two parts.
- Several rails in vertical plane will be needed if the bath has a large length.
After that, finally, you can go to the framework itself.
- Four short bars need to be interconnected using metal corners. Do-it-yourself screws are required for fastening. Between the vertical rails it will be necessary to place parts with a horizontal position. The reverse order of actions is not allowed.
- You need to drill two holes in the rail that is attached to the wall
- The frame should be on the wall, on the small side of the tub. Depending on the material from which the frame is made, select the appropriate fasteners.
- The long frame is mounted in the same way. It is attached to the second wall.
- If additional vertical slats were prepared from the very beginning, then first they are attached to the frame, and then you can go further.
- To connect both structures, screws will be needed. The fabrication of the frame can be considered complete.
Installation of a curved frame
The general principle is about the same as described above. But it is not without its nuances.
- Profiles for drywall - the basis for the manufacture of the frame; first you need to make cuts, only then give the necessary shape;
- There should be 2 such curvilinear profiles in total. They are fixed with ordinary self-tapping screws. Next, you can go to the vertical slats, they will strengthen the frame.
- He himself should be on some recess from the side.
- Only after the installation of the frame does the installation of the screen itself begin.
A little about sliding and removable options
Most often, acrylic bathtubs are equipped with removable screens. The latter are sometimes made of the same material, come as a set, in ready-made. Such products are distinguished by an attractive appearance, ideal for the baths themselves. But they do not allow to fully use all the free space.
Choosing a plastic sliding screen for the bath The design with external open shelves is one of the varieties of this model. Plastic is used for its manufacture, it is a convenient and practical option.
The material is also used in the production of finished structures. You can always choose an option that will have an end insert. The main thing - you need to purchase a model that clearly and accurately matches the size of the bath. Exact fit in place will have to be done in any case.
For blind structures best material becomes a brick. In the future, it is easy for him to make a lining. But in any case, it is important to provide for the presence of a technological opening so that there is always access to the main technological communications. The main thing is that even this detail should not stand out against the general background, fit into existing interior. Other materials can be used, but this design is often quite complex.
A great way to hide all plumbing communications and give the room completeness is to install a screen under the bath. And in order for the screen to fit perfectly into the interior of the bathroom and you save money at the same time, you can make it yourself.
Self-made screen under the bath
A bathtub installed without a screen does not look very elegant even in the most tidy and stylish bathroom. Therefore, you should think carefully about how you can close the space under it in such a way that access to plumbing communications is not closed and all functionality is preserved.
A universal solution to this problem can be a special screen installed under the bath. And in order to get a beautiful, unique and unusual interior detail, you need to abandon the finished purchased screen and make a screen for the bath with your own hands.
What material to choose?
The easiest to manufacture and most popular screens are plastic, which are not afraid of moisture and are quite durable. The screen can be pasted over with a special film or made of multi-colored plastic that matches the tone of the bathroom interior.
Those who do not intend to use the space under the bathroom as storage can install drywall screens for themselves, which should be equipped with a door so that you have access to plumbing equipment if necessary.
load-bearing frame
For each screen, you need to build special frame, on which the panels themselves must then be attached. The frame can be made from an aluminum or wooden profile with parameters 40x40, 30x30, 25x25.
Before starting work, it is imperative to make markings on the floor and walls in order to indicate as accurately as possible all the lines along which the screen will be installed under the bath with your own hands. You can also install transverse profiles that will help strengthen the screen and give additional rigidity to the entire structure.
Then all profiles must be joined together and attached to the floor and walls of the bathroom.
Brick screen construction
Quite original and at the same time stylish solution a brick screen can become, which will then be finished with decorative plaster or tile. Such a screen can be easily made by yourself.
Starting work, you need to mark the future screen so that the edge of the bath is flush with its wall.
You should also make vertical markings on the opposite wall. When laying bricks, this marking will be a guide. Masonry is recommended to be done on a cement-sand mortar in ¼ or ½ bricks.
If desired, you can make a special niche for the legs in the screen and be sure to build a small door so that there is access to plumbing communications and a drain. Such a door can be made with your own hands from plastic panels or purchased in a store ready-made.
Popular screens
Screen made of plastic lining
This screen is the cheapest, besides it is very easy to manufacture and install. Plastic does not need any additional finishing, so you can use the bathroom immediately after installation. If necessary, this design can be easily disassembled in order to open access to the space under the bathroom.
Before starting the installation, you should stock up on all necessary materials: in addition to the panels themselves, you will also need a start profile, which will need to be fixed around the entire perimeter of the screen.
In order for the plastic not to lose its shape and bend over time, it is necessary to strengthen the frame with an additional profile installed in the middle of the structure.
Installation should begin with gluing the lower part of the profile to the floor with a sealant. Then it is necessary to cut the lining strips with a construction knife and insert them into the starting profile. It is only necessary to pre-cut a hole in the place where the door will be located.
Plasterboard sheathing
For the manufacture of such a screen, you should use a special drywall, which is designed for rooms with a high level of humidity.
One of the main advantages of a drywall screen is that it can be built in the form of a niche with small shelves, so that it can successfully replace a chest of drawers or a wardrobe in a small bathroom.
Such a screen is made of drywall sheets, which are fixed on a frame assembled from wooden bars or a metal profile. Depending on how the bath itself will be located, the frame can be installed either on one side of the bath, or on both sides at once. Which option you end up choosing depends on the amount of materials you need to build the screen.
In order to make such a screen for a bath with your own hands, you will need drywall itself, paint, impregnations and sealants, a drywall profile and putty.
Work should begin with the layout of the frame. Then you need to assemble the frame from the profile in accordance with the future shape of the screen and install it with a screwdriver and a drill under the bathtub.
First of all, you need to fix the smaller part of the structure, then the larger one, and then fasten them together. After the drywall sheets are fixed to the frame, their surface must be treated with sealant, puttied and coated with a primer. When all layers are dry, finishing work can begin.
Remember that it is imperative to provide a technological hole.
Ceramic tile screen
Ceramic tiles can be used to decorate screens that are made of brick, MDF or drywall. First you need to prime the surface, then apply putty on it and wait until it is completely dry. Then you need to carefully wipe the surface with sandpaper and prime it again.
Tiles must be laid in exactly the same way as usual, using crosses for joints, special glue and grout. The advantages of such a screen are its durability and decorative effect.
If desired, some interesting color combination can be selected, or you can even make sliding doors, which will be a little more expensive and more difficult.
MDF sheathing
Before installation, it is necessary to impregnate MDF boards with special impregnations, as they are afraid of moisture. Then they need to be coated with a primer and fixed to the frame in the same way as plasterboard sheets.
For additional protection such a screen from dampness, it is necessary to do air vent, which should be located away from the service door. Most often, a small cut is made for this purpose, 2-3 cm wide and 5-10 cm long. In order for it not to disturb the general appearance of the bathroom and not to catch the eye, it must be closed with a decorative plastic grille.
You can trim the screen from MDF with plastic or tiles.
Screen designed for acrylic bath
Such a bath is more fragile than cast iron, so you need to be very careful when installing the screen. Its design is no different from the design intended for a cast-iron bath.
Before starting installation, it is necessary to mark the side of the bathtub and mark the places where the screen will be fixed.
Then the upper part should be aligned with the side of the bath and marks should also be applied to it, which should match the marks on the side.
The screen can be attached to the bath using self-tapping screws and mounting studs.
To make the entry points of the self-tapping screws invisible, it is recommended to close them with special plugs painted to match the bathtub. Also, you can build a screen out of bricks, but first you need to make the screen itself, and only then install the bath on top of it.
PVC panel screen
To make such a screen, you will need plastic or aluminum guide profiles, standard plastic panels, self-tapping screws and a square pipe, the cross section of which should be 10x10 mm.
First of all, from a pair of parallel tubes, which must be connected across the same tube, it is necessary to make a frame. dispose vertical racks needed depending on the size of the screen.
After painting the pipes, you need to install guides on them - attach one to the upper frame and the other to the bottom. After that, cut the panels and insert them into the grooves of the guides.
Screen Shape
Typically, screens that are installed under the bath, taking into account the shape of the bath itself and the characteristics of the room, are made rectangular. An exception can only be screens designed for corner baths, which have a curved design.
Depending on what material the bath screen is made of, you can improve it or add some features to it.
For example, drywall or brick screens may have small footwells to keep your feet from hitting the wall. Such a niche can be both inclined and straight. More screens may differ in the way of opening - hinged or sliding. The second option is more preferable, since in this case you do not need extra bed for doors.
How to make a sliding screen yourself?
It is best to make a sliding screen from plastic lining or PVC panels, since these materials are the easiest to work with, and the screen that is made from them is very durable.
You will need a special aluminum profile for installation, from which all guides for the doors will be made.
First you need to mount the frame, on which you should install the guides. The length of the guides should be equal to the distance between the walls or the length of the bathroom.
The doors should be fixed to the frame, placing them in the first profile groove on the sides of the screen. The central part is most often made fixed, and placed in the middle groove.
With the help of spacer bolts, the finished screen must be attached to the bath, and furniture handles must be installed on the movable doors.
Screens for corner baths
If you want to create a screen for a corner bath with your own hands, then you need to consider that materials such as drywall are quite difficult to bend on your own and then place on a rigid frame. Therefore, the most best solution there will be a screen made of plastic, which is relatively inexpensive, is not afraid of moisture and bends well. In addition, plastic panels of various shades are currently available.
First of all, you need to attach the plastic guides to the floor in the bathroom, repeating the curve of the tub itself. With help liquid nails needs to be attached to the top wooden blocks, which will serve to fix the upper guide.
Another screen option can be a brick screen, because masonry can be made in any shape, and then decorated with mosaics or tiles. But such a screen must be built first of all, and then a bathroom should be installed on it.
One of better ways ennoble a place for a bath and hide all aesthetic flaws - installing a special sliding screen. It will allow you to quickly, and most importantly, qualitatively and beautifully, hide all the flaws.
mirror option - visually increases the area of \u200b\u200bthe room
If desired, there various photos and video tutorials that will show you how to design a bathroom and install a sliding screen correctly, depending on the type of bathroom and the location of the pipes.
Decide on the material
First you need to decide on the material that will be used for decoration. By and large, all the proposed materials are quite suitable, the difference is only in installation and appearance. Here you should already be guided by the general interior of the room.
The main materials that are used to make do-it-yourself screens:
- moisture resistant drywall;
- plastic.
Of course, brick can also be used, but then finishing will be needed, and these are additional costs, both in time and in finance.
Frame - the basis
This element can be either wooden or metal. In this case, either bars or special profiles are used.
To do frame structure, markup should be done. To do this, the upper side of the bathroom is taken as a reference point. It is advisable to use a level for correct calculations. All components of the future base (profile, fittings, beams) are being prepared.
The next step is to assemble the structure. To do this, first the beam is attached to the supporting wall, then the rest of the parts are fastened from it. For this, self-tapping screws or screws can be used.
It is required to install the frame according to the future screen. That is, if you are supposed to have a viewing window, you immediately need to make special jumpers for it, so that in the end it does not close up. These jumpers are installed vertically. One side should have fasteners for the door, the other - for magnets.
For greater stability of the main structure, it is desirable to fix it additionally to the floor. This can be done with both special fasteners and glue. Besides Special attention should be given to the fixation of structural elements. The stronger it is, the more durable the entire sliding structure will be.
plastic screen
The use of plastic is very wide, mainly due to its qualities. Especially when it comes to a bathroom or a room with high humidity. Plastic does not "bloom", does not mold and does not rot, this is one of the main advantages. To do sliding structure with your own hands made of plastic, it is enough to pick up special panels or lining.
Installing this screen is easy. First, a special plastic starting strip is attached to the frame, it must be placed around the entire perimeter of the frame. Then vertical stripes are inserted, which enter the grooves of the starting strip until the screen is completely filled.
After all the work done, the door is installed in the viewing window. It can be found in any hardware store as well as the accessories needed for it.
Do-it-yourself drywall screen
If you have difficulty installing the frame, it is better to watch video tutorials or photos of how the base should look like.
The use of drywall has one advantage: its further processing can be made from the same material as the walls. That is, after the installation is completed, it involves the use of tiles, paint or plaster. The only condition: to install the structure in the bathroom with your own hands, drywall must only be waterproof. If use standard material, may have problems.
MDF panels
Installing a sliding screen with MDF panels- Pretty easy job. Only the frame in this case will be made in the form of a crate, with a step as for wall cladding. With the help of MDF panels, you can create interesting solutions.
It is best to turn to photo or video sources for a quality installation with your own hands.
Reading time ≈ 4 minutes
In order for the bathroom to take on its finished look, a special screen will need to be installed around it to hide plumbing fixtures. If you manage to mount a reliable screen under the bath with your own hands, then in this way you can save significant money. Moreover, there are no difficulties in such work.
Screen material selection
Many people do not understand how such a screen is made under the bath with my own hands, because they have no idea what material it can be made from. Actually there is a large number of various building materials that can be used in such a room with too high humidity. If you look at the proposed photographs of a screen for a do-it-yourself bathtub, this will make it possible to see that the following materials can be used for such work:
- Very convenient for this purpose is moisture-resistant drywall; it can be finished later with tiles, plaster or wallpaper.
- It can be sheathed with moisture-resistant MDF boards, also covered with trim.
- PVC panels are suitable for this.
- You can use a sliding screen installed under the bath or with drop-down doors.
If we consider all these options, then only a bath screen made of PVC panels will not require special finishing in the future. This material is very convenient to use because it is practical, completely moisture resistant and easy to clean. In addition, it is also durable, and if you need to make repairs to the screen, you can change one or more strips of plastic.
Requirements
When the desire has matured to solve the urgent question of how to make a beautiful screen for a bath, you should first understand what requirements should be placed on it.
- Access at any time to sewer units, the screen must have an opening opening or doors.
- The connection of the floor with the screen in certain cases must be sealed so that moisture does not enter under the bath.
- The screen should not be a supporting structure, so it is advisable to make sure that the bath cannot lean on it.
If you make a high-quality bath screen using moisture-resistant drywall or PVC panels, then you can leave free space under it so that it cannot interfere with your feet. But in this case, this gap should be at least 10 cm, so that emerging moisture can be wiped out under the bathtub.
Screen mounting
You can watch the video correct installation bath screen; only this will make it possible to understand how to make it and what materials will be required for this. Consider the option of drywall and PVC panels. To do this, you first need to install a reliable frame. As a frame for the screen, it is quite possible to use both wooden beam 30x30 or 40x40 mm, also a metal profile.
So that subsequently rot does not appear on the beam and a fungus does not appear, the wood must first be treated with a special antiseptic.
But when installing the frame, if drywall is used, one should take into account not only its thickness, but also the material for the subsequent screen finishing.
In order not to be mistaken, it is necessary to make markings both on the floor and on the wall before installing the frame. And only after the frame is made, is the final stage in the form of attaching the screen under the bath, where you can use drywall, plastic or other material.
