Winter and summer modes of plastic windows. Video and description how to translate. Do-it-yourself adjustment of plastic windows

The best indicator of the quality of manufacturing a plastic window and its installation is frosty weather. Perhaps this is why some prefer to install these designs in winter time. If your window was installed in the summer, and in the winter you noticed that it was blowing, then you should understand the reasons for this phenomenon. To do this, you can contact the company where the product was ordered and installed, or you can perform insulation plastic windows with your own hands.

As a rule, a quality product, in principle, should not create any problems. On the contrary, its purpose is their decision. However, in reality, things turn out differently. However, do not rush to blame installers or manufacturers for everything - blowing through the sashes can be caused by the fact that the fittings were initially set to summer mode. In this case self repair plastic windows (or rather, their adjustment) is quite simple.

Immediately I would like to note the fact that in some designs the fittings do not allow changing the modes of plastic windows in accordance with the season. In order to find out if your design supports changing modes, it is enough to study the system of pins that are responsible for this event. In the event that the trunnion has a recess for a hex key or it is represented by an oval shape, then such fittings are initially designed for the possibility of setting the mode. In this article, we will talk about how to set winter mode on plastic windows, having considered all the intricacies of this process.

Winter mode of plastic windows - fittings setting

The best time to adjust the fittings is late autumn (you can also catch this moment if you feel a cold blow from under the sash). In that situation, if you do not experience discomfort while indoors in winter, then it is highly not recommended to transfer plastic windows to winter-summer mode. This is due to the fact that with such manipulations, the rubber seal wears out much faster. If you feel the need to calibrate the fittings for winter mode, then try to treat this process as carefully as possible. Due to incorrect settings, you can damage the hardware itself.

Given the fact that you can set up the winter mode of plastic windows yourself, we offer you a complete guide to action. So you can save on the services of specialists.

So, consider the sequence of your actions:

Raise the hardware roller.
Use a hex wrench to adjust the amount of pressure (the direction of rotation of the trunnion can be found out by “trial and error”).
Lower the roller into place.
Turn the roller so that the mark marked on it looks inside the room. To set plastic summer mode on the windows, the risk of the roller must be turned towards the street, weakening the degree of pressure.
All of the above must be done with each roller that is present around the perimeter of the sash or door.

If you are still not confident in your abilities, then in such a situation it is better to seek the help of specialists. However, be prepared for the fact that their services will have to be paid for, taking into account the departure of the master to the house.

Concluding this topic, we will give you some more helpful tips regarding the modes of plastic windows:

In the event that the seal is worn out, it must be replaced with a new one.
It is strongly not recommended to leave the fittings in a permanent winter mode. It must be periodically adjusted according to the time of year.
Be careful with your settings. In the event that you incorrectly adjust the fittings, the window may break. As a result, you will have to "fork out" for a full repair of the product.

By properly calibrating your hardware, you will maximize the life of your hardware, as well as the life of your rubber seal. To put it more briefly, the principle of the modes is as follows: in the warm season, the degree of sash pressure must be reduced, and in the cold, respectively, increased.

Causes of blowing, unrelated to the modes of plastic windows

Among others existing causes blowing plastic windows the most common are: poor-quality installation of the structure or a defect in the manufacture of the product. For poor-quality installation, claims must be made to the company that, in fact, was engaged in the installation of the structure. In the event of a manufacturing defect, the responsibility lies entirely with the manufacturer. Claims in such a situation must be presented to the organization where you purchased such a window.

If we consider the reasons in more detail, we can distinguish following points, contributing to the blowing of plastic windows:

The window profile cracked as a result of being made of poor quality plastic.
Incorrect hardware calibration. It leads to the fact that the sash is not pressed tightly enough against the frame, as a result of which blowing is formed.
Loosely pressed glazing bead, unreliably holding the double-glazed window. A similar problem in most cases is observed in winter - it is at this time that the product decreases in volume due to low temperature. Often, as a result, glazing beads pop out of the grooves.
Poor-quality fixation of the structure on the foam.
Incorrect mounting of the frame in window opening(an insufficient porch of the sash to the window appears).

Of course, all of the above in no way gives you a reason to panic. These faults must be corrected by the company that installed the product. In which case, some components can be replaced due to their malfunction - warranty service and consumer rights will be your trump card in such a situation.

The main advantages of plastic windows

If the product was manufactured with high quality, and its installation was carried out in compliance with all modern technologies, then the design will act as an iron guarantor of a favorable microclimate in the room where it is installed. The main advantages of plastic windows include the following points:

They are warm. Due to their tightness, the products eliminate the need for additional thermal insulation.
They are sealed. In the closed state, the design does not allow random gusts of wind and drafts to pass through it.
They are efficient. Due to the plastic windows, it is possible to raise the temperature of the room up to five degrees, without resorting to additional means of heating.
They are persistent. With metal reinforcement plastic profile, indicators of stability and strength of the window are kept at a fairly high level.
They are universal. High-quality constructions do an excellent job with all the duties assigned to them. Choosing PVC windows, you will forget for a long time what annual insulation of openings is. In addition, there is no need to paint these products and constantly care for them - all that is required of you is just occasionally wiping them with a damp cloth.
They are durable. A solid product can serve you for more than forty years without losing its quality and color.

If the design installed in your apartment does not correspond to any of the above, you can safely send a claim to the manufacturer. A truly high-quality plastic window must fully comply with the previously declared characteristics.

Additional window insulation for winter

Windows do not allow extraneous noise from the street to penetrate into the apartment, provide the desired air temperature in the room. Plastic structures after installation require periodic maintenance. First of all, you need to figure out how to switch windows to winter mode, why it is necessary, when to carry out such procedures. In addition, it is important to study the principle of operation of locking mechanisms, which have a number of functional features.

Don't forget about this wonderful mode in winter!

Window Modes

In the absence of theoretical knowledge and practice, it is advisable to contact specialists. They can give professional advice on the accumulated issues and offer best options problem solution.

There are three modes on plastic windows, with the help of which the pressing force of the sashes is regulated. Among them:

Summer - the sash is pressed weakly. This position promotes air circulation in the room. Sealing rubber is minimally subject to wear.
Winter - provides a fairly tight clamp. There is no movement of air masses, because of this, heat is retained in the room. In this case, the maximum load on the seal is carried out.
Standard - middle position. Often, installers leave structures in this form. The difference is that true professionals explain to the owners how to switch windows to winter mode (or summer), and unscrupulous ones do not consider it necessary to tell this. This position is intended for the off-season.

In this video you will learn how to adjust plastic windows

Switch pros and cons

It is enough not to put plastic windows in winter mode for 2-3 years, so that even after the adjustment, it starts to blow from the window sill or balcony door. There are a number of problems that can arise when correct adjustment eurowindows. The main one is a violation of the microclimate in the room.

Excessive humidity causes condensation on the walls, frames and double-glazed windows. All this leads to the formation of mold. Summer mode in winter leads to significant heat losses, it becomes necessary to heat the room additionally, which is fraught with an increase in the cost of paying for electricity or gas.

If you use the winter position in the summer, this will lead to rapid wear of the rubber seals. As a result, any subsequent adjustments will be useless. The way out is to replace the seals, which are expensive.

Do not use winter variations of using windows in summer

Disadvantages of window adjustment may appear with incorrect manipulations that the owner performs on his own. If the procedure is carried out correctly, the change of modes will benefit. First of all, you need to figure out in what situations the switch will be justified.

Timely change of position increases the life of windows, even if such manipulations have not been carried out long time. You can get rid of drafts in the winter or dust in the summer due to the deterioration of the seal if you rearrange the structures “for the winter”. This will delay the repair for one to two years. Sagging loops can be eliminated in the same way. The last resort is to replace the hardware.

Types of eccentrics

Not all plastic windows can change the modes. To figure out if there is such a system on specific double-glazed windows, you need to pay attention to the locking mechanism. The eccentric located in the middle may be oval. In addition, there are parts that have a hexagon hole in the center. This indicates the presence of a winter regime in window structures.

Algorithm for adjusting plastic structures with various types fittings are identical, only their position differs. Before starting work, it is necessary to study all types of trunnions:

Oval parts after installation are often located diagonally - this is the standard position, the middle between winter and summer mode. Horizontal arrangement means "winter", vertical - "summer".
On a round pin for a hexagon, you can determine the position as follows: if the part is extended in relation to the street, this is the winter mode; placed in the center - standard; recessed towards the room - summer.
The third option is a round hex eccentric, but when rotated, it does not move. This type of fitting is equipped with a label indicating the position of the windows. The value is similar to the previous option: if the label is located towards the street - "winter", towards the room - "summer", in the middle - "standard".

There are several types of tools for regulating the winter regime.

Preparatory work

Before setting up the fittings of plastic windows for winter mode, it is necessary to perform a number of additional manipulations. First, use a rag to remove grease from the locking mechanisms. This is necessary so that dirt and dust do not get inside during the adjustment process. After the procedure, you need to restore the lubrication layer.

Then you need to find all the eccentrics, the number of which depends on the size of the window. If there is a mosquito net, you need to dismantle it, rinse it and put it aside until the arrival of heat.

Before the onset of cold weather, the seal should be treated with silicone or glycerin grease. Experts recommend giving preference to silicone-based sprays, which can be purchased at automotive or household outlets.

Many craftsmen believe that switching fittings from "summer" to "winter" should be when drafts are felt. But this option is optimal for those areas of the country where a warm climate prevails. The most suitable time is the beginning heating season. In addition, the need for adjustment is indicated by misted glass or frozen ice with inside PVC windows.

Before changing the mode in plastic structures, you need to carefully examine the rubber parts. There are situations when the fittings are adjusted correctly, but the seal has become unusable (torn or cracked). In such a situation, it is imperative to replace it. For one season you can buy cheap products, but they will not last more than a year.

After a detailed study of the fittings and how to translate it, you can proceed to the adjustment itself. For example, over time window frame may skew, causing one side to fit more tightly than the other. This situation is unacceptable, because an additional load is created on all components and drafts appear, so it is important to set it up correctly.

You need to start adjusting the sash horizontally or vertically from the bottom hinge. To do this remove the protective plastic cover and find a screw with a special hole for the hex, which is located on top.

Turning it clockwise will raise the frame, turning it counterclockwise will lower it. To move the sash to the frame or, conversely, place it further, turn the screw located at the bottom of the hinge.

Step-by-step instruction

Once you understand the theory, you can move on to practical setting window structures. Step by step guide how to winterize plastic windows:

After opening the sash, find all the pins on standard windows there are three of them. If the marker is closer to the street, it must be moved in the opposite direction so that it is located towards the premises.
To work, you will need a hexagon of a suitable size, often a 4 or 6 mm tool is used. It is desirable that during the manipulation there is a set of different keys at hand, because thin products will be needed for vertical and horizontal adjustment.
Having picked up the tool, proceed to turn the trunnion. Perform similar manipulations for the rest of the eccentrics. Then check the tightness of the abutment of the sash to the frame.

Regardless of the frame design, tuning is not as difficult as it might seem at first glance. It is important to follow certain rules and follow step by step instructions. If the windows were installed not so long ago and are still under warranty, it is better to call a specialist from the company that did the installation. Such a procedure is free, but one cannot hope that everything will be done perfectly, one should not exclude the possibility of self-finishing the structures. After setting up at least one sash, subsequent maintenance can be done by hand.

in your apartment or country house installed modern windows made of plastic, which served flawlessly for a long time. And suddenly minor malfunctions began to appear: they noticed that the sash began to close not entirely, and a draft and extraneous noise appeared in the room; The handle has become blocked and will not turn.

All these minor annoyances can be easily eliminated. The main thing is to understand the scheme and technique for adjusting PVC windows, individual parts and fittings, and the window will function correctly again. Before troubleshooting a window, you need to study phased work, as well as prepare a mandatory set of tools, without which the task will not work.

PVC window adjustment tools

To set up the window mechanism, you must acquire the following tools:

hex key;
a set of nozzles for a screwdriver (like an asterisk);
a Phillips screwdriver and a regular flat one;
pliers.

As a lubricant, it is better to use automotive oil or a special aerosol.

Find out what window fittings are for plastic windows.

Many window adjustments are done with a hexagon. A set of nozzles for a screwdriver can be useful if, in the manufacture of a window frame, mechanisms were used that have bolts with a certain top for a nozzle of the “star” type.

Basic areas for adjusting plastic windows

Compared to a sliding window mechanism, adjusting swing sashes in plastic windows is a more laborious process. You need to know the main setup points, of which there are five. By adjusting them, you can raise or lower the sash, adjust it horizontally to the left or right, adjust one of the corners located at the bottom of the sash horizontally. There are also two more adjustment sections, the adjustment of which allows you to reduce or increase the density of the sash pressing against the frame.

Troubleshooting window and balcony handles

It happens that the window or balcony handle loosened, so the sash began to close loosely. To eliminate this malfunction, it is necessary to tighten the mechanism for attaching the handle itself. To do this, remove the rectangular pad under the handle. She calmly rises and turns to the side by 90˚. Under it are bolts, which must be tightened with a Phillips screwdriver. You can easily remove the cover without much effort and picking with a screwdriver, which can only damage the profile and cause damage to the edges of the lining.

How to Repair a Stuck Knob That Won't Turn to the Right Position

Such a malfunction is more significant, having several reasons:

Perhaps the mechanism needs to be cleaned and lubricated.
If the handle does not turn completely to the position, or turns, but with great difficulty, you may just need to slightly loosen the clamp on the sash itself.

Adjustment of the handle in case of poor clamping.

It is told about what fittings for plastic windows are better.

Two options for solving the problem:

To clean and lubricate the entire mechanism, it is necessary to dismantle the handle. Cleaning can be done with a vacuum cleaner or a special brush. After cleaning it is necessary to lubricate the mechanism.
To reduce the clamping action, eccentrics are subject to adjustment, which are located at the ends of the wings on the side where the handles are located. In addition, it is necessary to adjust the bolts located on the hinges on the opposite side.

Adjusting a handle that is blocked

If the window handle is blocked, it does not make sense to replace it with a new one. In this case, you can not even dismantle it completely. The occurrence of a malfunction is associated with improper operation of the locking mechanism. At the same time, he does not allow the sash to change its state when it is open. To do this, you must turn the lock lever to give the handle an unobstructed move.

There are two ways to troubleshoot this problem. depending on the type of construction of the window mechanism and fittings. In one embodiment, the locking lever may be in the form of a tongue located at an angle to the seal and screwed to the end of the sash when the window is open. In another embodiment, the lever may be in the form of a clip that fits over the seal and serves as a gasket.

Broken window handle

If the handle breaks, the window cannot be closed. Such a case of repair can be done independently. To do this, you need to purchase a new pen or in hardware store, or order in the organization from which plastic windows were ordered. Then proceed directly to work on the replacement.

To do this, it is necessary to dismantle the decorative trim that covers the fastening of the handle to the frame. It rotates freely in any direction. Then you need to unscrew the bolts with which the old handle is held. The new handle is screwed onto the same bolts.

Quite often, adults install PVC windows that have safety handles. This is due to the need to protect children from opening windows on their own. This mechanism prevents the window from opening.

You will find detailed information about glass railings for stairs.

If the fuse is out of order, it is necessary to turn the handle 90˚ together with the plug. Then two bolts are unscrewed. After which it gets old pen from the sash (by the method of gradual loosening). A new one is placed in place of the old one, in the same position at the time of its extraction, and bolted.

PVC window correction "winter-summer"

Adjusting the window for the winter provides for a high level of pressure, and for the summer - a low level.

Some adjustment rules:

If there is a need to adjust the level of pressing the sash to the frame from the side of the hinges, then for this it is necessary to use the adjusting screw, which is located on the lower hinge.
If the sash has a tilt and turn mechanism, then additional adjustment of the sash pressure from the side of the upper hinge should be performed.
To access the adjusting bolt, which is located on the section of the upper hinge, you must first open the sash, and then turn the handle to the ventilation position. Before doing this, press on the locking lever.
If you turn the blocker to the right, then it is pressed against the frame, in the opposite direction, the pressure is weakened.

Adjustment of some types of fittings occurs with the help of special parts located on the frame from the side of the handle. Their position can be corrected with a hex key. For a more weighty clamp, it moves closer outward. If there are clamping mechanisms on the frame on the side of the hinges, their adjustment is also carried out with a hex key. At the same time, if the tongue is pulled out more, then the sash will have a greater pressure on the frame.

Adjustment of the clamping mechanism: due to slots or according to the season

The clamping device is presented in the form of a sealing gum, which can also fail over time. The reason for this is: shrinkage and loss of elasticity of the gum. When installing a new window, the sash fits snugly against the seal, and when the pressure level decreases, the tightness is broken, which becomes insufficient for a snug fit.

The window hardware manufacturer has foreseen such a situation, so the PVC window has a mechanism that allows you to change the clamping tension when the sash is closed. The pressure can be increased or decreased depending on the needs or the season.

In practice, the following situation arises when in the summer the rubber seal tends to expand, since it has the most high level elasticity. In winter, the opposite situation occurs, the gum begins to shrink at low temperature regime. That is why, in winter, it is necessary to increase the pressure so that the cold wind does not blow through the sealing joint.

About the types of seals for metal doors, read .

If you forget to adjust the winter version of the clamping of plastic windows for higher summer temperatures, then the gasket will be deformed by the window sash. This can lead to breakage of the sash. In order to avoid such a situation, it is necessary to adjust the clamping pressure from winter to summer and vice versa before each season.

Clamp adjustment scheme

To adjust the clamping mechanism of the sash, there are eccentrics for this. These are special mechanisms - trunnions, allowing the sash to be firmly fixed in the closed state. The clamping adjustment is carried out by these trunnions.

When increasing the clamping force, the trunnions must be turned to the right. It should be remembered that with full rotation, the eccentric returns to its original place. When the pressure is reduced, the pins turn to the left. The above scheme is applicable only for those leaves that open from left to right. When opening in the other direction, it is necessary to rotate the pins to the right to reduce the pressure, and to the left to increase it.

What is a magnetic seal for metal doors?

Manufacturers offer several options for adjusting these mechanisms. There are three such ways:

The rotation of the trunnion is carried out using a flat screwdriver. To do this, it is inserted into a groove located on the eccentric.
The trunnion is clamped with pliers and pulled towards itself, then rotated.
The trunnion is clamped with pliers and rotated in the required direction without pulling in its direction.

When using trunnion pliers, do not use too much force to turn the eccentrics. Initially, you need to make sure which of the options will be used to adjust the clamping mechanism. Otherwise, it may be damaged.

Do not be afraid of such a problem, the main thing is to start adjusting the window sashes at the time.

In practice, there are three common ways to adjust the position of the sash:

When the sash begins to cling to the bottom of the frame along the edge of the handle with its lower section. To correct this problem, it is necessary to move the sash up and move its upper section in the direction of the support.

When the sash hits the middle support of the frame. To do this, you need to move it towards the canopies. If the contact area is located closer to the upper or lower part, it is necessary to bring the sash closer to the corresponding support.

When the sash catches the upper frame opening. To do this, the lower part of the sash is moved towards the support. If such an adjustment is insufficient, the entire sash moves down.

All adjustments are made with a hex wrench. To move the sash to the upper or lower part, it is necessary to rotate the adjusting bolt, which is located in the lower support. To get to it, you need to remove the decorative plastic panel from the frame. On the top edge of this section is a hole that you need to get into with a key. The sash is raised when the adjusting screw is turned to the right, lowered when it is turned to the left.

It is possible that you will be interested.

Below on the same support is another adjusting screw. Access to it is possible from both sides of the sash. When this screw is rotated, the sash approaches or moves away from the support. The adjustment is carried out as follows: the key is turned half a turn and the presence of a gap between the frame and the sash is checked. If the bolt is not turned enough, it should be slowly continued to turn until the contact is eliminated.

Adjustment of the upper section ("scissors") is carried out in a similar way. To get to the bolt, with which the sash moves to the sides, it is necessary to open the window wide open. In this position, the tilt and turn mechanism will show the hole for the adjusting key.

Video

You can see an example of adjusting the summer-winter window in the video:

All the described schemes for adjusting plastic windows are not difficult to get rid of malfunctions with your own hands.

The instructions contained in this article will help you find out what position the trunnion is in and figure out how to switch windows to winter mode without resorting to calling the master at home. The text contains an overview of the features and characteristics of window fittings, tips on its use and proper adjustment, as well as a visual video and photo with a clear description of this procedure.

Metal-plastic double-glazed windows are widely used for glazing apartments and private houses. Such designs have the ability to make adjustments and set the degree of pressing the sash. Thanks to this adjustment of windows PVC system can be switched to winter or summer seasonal mode. This feature is very convenient, although not all owners know about it.

The presence of the adjustment function depends on the type of fittings used. This feature is not inherent in every type of windows, but only in modern modifications. There are several modes. Each of them has its own characteristics.

Standard, summer and winter modes of plastic windows

The standard mode assumes the middle position of pressing the sash. This means that the eccentric will be located in the middle. The window structure installed in this mode, in most cases, is able to work effectively both in winter and in summer. This ensures the optimum pressure level of the sealing material.

In winter mode, windows are characterized by a tighter fit of the sash to the frame. Due to this, in the cold season, metal-plastic structures effectively retain heat, keeping it indoors.

Summer mode is characterized by a less dense fixation of the sash. In this position, air currents circulate freely between environment and room. In other words, the effect of micro-ventilation is provided, due to which optimal microclimatic conditions are maintained in the heat.

Note! Using the summer mode allows you to weaken the sashes as much as possible, which has a positive effect on the condition of metal-plastic windows that have survived a long winter. At the same time, it remains possible to protect the premises from dirt, dust and heat.

Why is it necessary to adjust plastic windows for summer and winter mode

The transition from one mode to another allows you to keep the window structure in a functional state and extend its service life. Adjustment involves changing the degree of fit of the sash to the window frame. In the winter season insulation material shrinks, and in the summer it expands. It, like all fasteners, can be protected from wear by adjustment, video and photographic materials with instructions describing how this can be done, there is enough on the network.

Sometimes during operation there is a displacement of the sash. When it is warm outside, this does not cause inconvenience, but in winter, because of this, the temperature in the room can drop significantly. If this happens, you should check the condition of the frame. During the installation of metal-plastic windows, the craftsmen check the position of the sashes in each of the modes, as well as the absence of gaps between the parts. However, perfectly executed installation is not a guarantee that the sashes will not disperse over time.

If the windows are installed in early spring or in winter, structures are exposed to external influences:

The outside temperature is rising.
Under the influence of climate change, plastic begins to expand.
The outside temperature is dropping.
Under the influence of temperature changes, the plastic decreases in volume, while it is not always able to take its original shape.

Similar processes occur if windows are installed in the summer. But first, the material contracts as temperatures drop, and then expands. However, it is impossible to avoid changes in technical specifications products, so gaps often appear in the windows.

The need to transfer plastic windows to winter mode or summer mode may be due not only to the seasonal transition, but also to a number of other reasons:

Drafts from the window, carrying frosty air in winter and dust in summer.
Sagging sashes due to worn hinges.
Jamming of the sash in the ventilation mode.

Note! During the operation of windows, the sealing material is subjected to severe wear. Therefore, it is very important to timely carry out the adjustment of plastic windows with your own hands when switching to winter / summer modes.

How to check the possibility of adjusting plastic windows for the winter

The possibility of switching between summer and winter modes is provided by special fittings. The availability of this function depends on the class of these parts.

There are several types of accessories:

Budget fittings - parts that have the lowest cost and are solely responsible for opening and closing the window structure.
Standard accessories - the package contains standard and anti-burglary parts that allow you to prepare the window structure for summer or winter.
Specialized fittings - includes anti-burglary and specialized parts that allow you to transfer plastic windows to winter or summer mode.

Most modern manufacturers produce standard and specialized fittings with the function of switching from one mode to another.

How to determine which mode of plastic windows is set: winter or summer

Before adjusting plastic windows for the winter, it is necessary to establish in what position the fittings are installed. There are several ways to help you find out how the sash is placed. In each case, the technique depends on the shape of the trunnion.

How to determine the winter mode of plastic windows before setting up the fittings:

A sheet of paper is taken.
It is placed between the sash and window frame so that one of the tips remains on the side of the room.
The window closes.
Then you should pull the sheet towards you.

If the paper passes easily, then the structure is set to operate in summer mode. Otherwise, it will break.

Helpful advice! Manufacturers of metal-plastic structures advise operating windows in summer mode all year round. If there are no reasons for switching to the winter position of the sash, this procedure is not necessary.

In addition, there is a way to visually determine whether the winter mode is set on plastic windows, photo examples with markings can be easily found on the Internet. According to this method, it is necessary to find a marking in the form of a dash, asterisk or dot on a round pin. Next, determine the direction of this mark. If the marking points towards the room, then the windows are set to summer operation. If the mark looks towards the street, then the design is set to winter mode.

Related article:

Causes of the problem, types of malfunctions, ways to eliminate them. Tips for preventing door breakage.

Pins are not only round, but also oval. The mode of operation in this case is determined by the nature of the placement of the eccentric. If it is turned vertically, then the windows are set for summer weather. In a horizontal position, the trunnion presses the sash to the frame as tightly as possible, which indicates the winter mode.

Having determined the position of the sash, you can proceed to the solution of the question of how to switch the windows to winter mode, video instructions describing this procedure are presented on the network in large numbers.

How to adjust plastic windows in winter / summer modes: video review and description

To find out how plastic windows are regulated, it is advisable to read the manufacturer's instructions, study descriptions and videos that can later be used as visual material. If the work will be carried out without the help of a specialist, it is very important to fully understand the essence of the issue and act as carefully as possible, since there is a risk of damaging the fittings with a careless movement.

How to switch windows to winter modeoperation: photoand description of the preparatory phase

Preparing a window for customization begins with cleaning. To perform this procedure, you will need a certain set of tools and fixtures.

This list includes:

a mop equipped with a telescopic handle;
means intended for washing window panes;

paper napkins or towels;
means intended for cleaning accessories;
silicone-based lubricant;
brush or hard brush.

Helpful advice! If you constantly take care of double-glazed windows and keep them clean, before adjusting plastic windows for the winter, you will not have to spend a lot of time preparing them.

The preparation of the window structure is as follows:

glass is washed;
the frame is wiped;
dirt on joints and joints is removed;

with a brush or a hard brush, the fittings are thoroughly cleaned;
all window elements are wiped (especially areas with grease);
by applying a few drops of silicone grease, the fittings are processed;
pin position is determined;
the pin is set to the required position;
relubrication;
all hinges are lubricated.

After all the above manipulations are completed, the result is checked using a sheet of paper.

How to switch windows to winter mode: photoand recommendations

To adjust the fittings on double-glazed windows, you will need a special tool. Experts recommend bringing with you:

Pliers.
Screwdriver.
Hex key.

The necessary tool should be purchased immediately after the purchase of windows, as the need to configure them may arise suddenly. Sometimes eccentrics do not protrude, and many owners search the net for videos on how to adjust plastic windows with similar features. The secret is to pull the pin out. After that, it can already be configured. When the eccentrics are in the required position, they should be sunk into the sash again.

Experts do not recommend changing modes in the first year of operation of windows. In new designs, the sealing material has not yet been subjected to wear, therefore, mechanical loads on the fittings should not be increased and adjusted. If the winter in the region does not differ in too low temperatures, the operation of double-glazed windows in summer mode is allowed. At the same time, winter adjustment should not be left for the summer, since in such a mode accelerated wear of the seal will occur.

Note! Mode change is allowed to be performed no more than 2 times a year. Moreover, the length of the winter period of operation is much shorter than the summer one.

Setting up plastic windows: how to adjust the sashes horizontally and vertically

Regardless of the mode of operation, it is not allowed for the structure doors to be skewed. Sometimes you have to resort to correcting their position in order to correctly set up the fittings. The presence of sagging or distortion will shorten the life of the seal. To work, you will need a pencil with a soft lead and a ruler. All manipulations with the window must be performed very carefully, otherwise you can ruin the plastic.

Preparing a window for sash adjustment:

The structure is closed.
The sash is outlined with a pencil around the perimeter (marks are applied to the frame).
The window opens.
The distances between the frame opening and the marked lines along the entire perimeter of the structure are measured.

On all sides, the indicators should be the same. A slight deviation is allowed, but not more than 7 mm. If the level of the left edge is underestimated in relation to the right, or vice versa, you need to correct its position. To do this, you need to remove decorative insert and tighten the screws that are installed at the bottom.

In some cases, it becomes necessary to raise the sash. To do this, the upper screw is unscrewed halfway. If the sash placement level is too high, the fasteners are screwed in ¼ turn. If it is clearly underestimated, the bolt is unscrewed ¼ turn. The horizontal adjustment of the sashes is carried out by means of screws that are located on the hinges.

How to adjust plastic windows horizontally:

The window opens.
A hole is found, the configuration of which corresponds to a hex key.
The screw turns smoothly until the sash is aligned to the desired position.
A check is in progress.

To check the quality of the setting, you should close the window structure. If it is necessary to reduce the distance between the hinge and the sash, the hex key must be turned clockwise. If the distance between these elements is too small, then the tool rotates counterclockwise.

Important! A strong horizontal displacement of the window is not allowed. The maximum allowable indicator is 3 mm (in either direction).

Possible problems with metal-plastic windows and ways to solve them

You can check the quality of the work performed not only with a sheet of paper, but also by ear.

A well-adjusted window behaves like this:

nothing prevents the free opening of the valves, they close freely;
there is no creak, rattle and other extraneous sounds;
all the screws holding the sash in the desired position are screwed in approximately the same way;
around the entire perimeter of the window, the sealing material has the same thickness and shape;
after opening/closing the sash, the sealing material returns to its original shape.

Changing the operating mode of a structure is sometimes accompanied by problems. If the roller does not turn, it may need to be pulled out of the slot on the retainer by turning 90°. If this does not help, the part must be lubricated with WD-40. This lubricant is in the form of an aerosol mixture in a can. It is designed for processing joints and threads.

If, when switching to winter mode, drafts from the window do not disappear, then the life of the seal has ended. It is very easy to replace this material. It is enough to remove the old seal from the frame and the grooves of the sash and insert a new one in its place (by hand or with a blunt spatula). Since the material is welded to the profile in the corners, you will have to cut it to remove it.

The information contained in this article clearly explains how to put windows on winter mode. Video, photo materials and detailed descriptions procedures allow you to fully understand the features of adjusting double-glazed windows. Using this data, you can quickly and easily provide warmth and comfort in own house when it's cold outside.

On the one hand, such manipulations promise advantages, reducing heat loss through the window structure, and on the other hand, as a result of adjustment, the seal wears out quickly.

How to transfer plastic windows to winter mode: video-instruction

Installing plastic windows is often not enough, as their proper maintenance is also required. If used incorrectly, problems can arise, and in this case, the windows will not protect the room from wind, cold and noise. Most often, you have to pay attention to the named problem when you need to change the mode. To do this, you need to configure.

Why regulate metal-plastic windows?

Everyone knows that plastic windows have two main modes: summer and winter, each of which performs its role. Window manufacturers usually indicate in their recommendations how to properly operate and adjust metal-plastic construction. It is safe to say that this avoids a lot of problems.

We will tell you how to do this correctly later in the article. It is important to remember that all the recommendations will help to properly adjust the metal-plastic structure and keep the heat in your home.

Why is it necessary for the "summer-winter" mode?

Few people know how to set up a window, so some prefer to turn to specialists for help. But there is nothing complicated in setting up windows, and if you carefully study all the recommendations, then you can carry out all the work on regulating the structure yourself.

Initially, the adjustment is made when the windows are just installed. This greatly simplifies operation, but, unfortunately, does not allow you to select the desired mode in the future. For example, if windows were installed in the summer, then in the winter it is necessary to reconfigure them, and vice versa.

Experts say that it is simply impossible to do without adjustment, since it is a kind of repair, which allows you to determine the preparation of the structure for operation in the cold season. Setting plastic windows for the winter improves their tightness, prevents drafts from entering the room. Thanks to her, the microclimate in the room will always remain at a normal level.

If the adjustment is carried out incorrectly, then the room will always be present high humidity and sometimes even frost on the windows. If the structure is operated for a long time, then the tightness becomes minimal, and there are a lot of reasons for this.

Often adjustment of plastic windows is required when a breakdown occurs. To avoid this, they need to be constantly adjusted as the seasons change. If you leave the windows in summer mode, then cold air masses will be able to freely penetrate into the room, which will naturally affect both the level of heat and the energy consumption for its conservation. By setting the windows for the winter period in the desired mode, you can keep the heat in the room.

When is window adjustment required for the winter?

Setting up winter-summer plastic windows may be required in several cases, which you should pay attention to in more detail:

Windows should be adjusted immediately after the structure has been installed.
Even specialists can sometimes make mistakes during installation, such violations lead to deviations, gaps begin to form. In this case, a full repair and adjustment of plastic windows will be required.
A technical inspection should be carried out every two years. If the frame is operated without such checks, then some deviations may be detected.
The window may fail if it was installed in a new building or in an old house, as the building may sag. It is not difficult to notice this - after adjusting the windows for the winter period, it will still penetrate into such a room cold air. In this situation, it is important to take into account the possibility of subsidence of the building, and problems can be avoided.

Naturally, these are far from all the reasons why it may be necessary to adjust the window for the winter, but they are the main ones that the consumer may encounter.

Instructions for adjusting the window for the winter period

Setting up plastic windows for the winter with your own hands has always been the most topical issue. To attract specialists to work, you need to spend a fairly decent amount of money, and in order to do all the work yourself, it is enough to carefully follow the recommendations.

The design for winter must be prepared in advance, otherwise the owner may encounter big problems during operation. The fact is that it will be very difficult to fix anything during a decrease in temperatures.

First of all, you need to pay attention to the accessories. Adjusting the fittings of plastic windows allows you to make sure that the windows begin to fit snugly against the frame. If the windows were previously adjusted incorrectly, then you will notice strong drafts in the room.

Adjusting the window does not take so much time. In order to carry out all the work, you will need to use a hex key, which is available to almost every owner in the house. At the end of one leaf there is an element that serves for locking, in another way it can also be called a clamp. It sits on a rectangular platform, but can be moved up or down. It is very important that this clamp be moved in the direction of the street when a strong cold snap is planned, this is precisely what will provide the owner with good tightness.

To properly tighten the clamp, you should use a hex wrench. You need to twist it counterclockwise, applying a small amount of effort. Thanks to this, he will be able to turn into correct position and fixes itself. As soon as all the manipulations are completed, it will be possible to say with confidence that the work has been done at the proper level, and now it will be warm and comfortable to be in the room even in the most severe cold.

How to set up different types of accessories for the winter?

Each hardware manufacturer fights for quality in its own way, and this also affects the adjustment of the plastic window. Some developers use complex structure designs, and some - simplified. Consider all types of fittings and how it can be configured:

Roto has round heads in its designs, which is why the owner may have a problem with the keys, since it will not work to find the right one. Here you will have to suffer and look for a key with a large cross.
Maco made sure that the heads were the most convenient - the manufacturers made them oval in shape, and you can twist them with ordinary pliers.
TORX fittings are considered the most reliable. To switch to the winter period, you will need to use a hex key.

Some plastic window developers use special protection in their system, in which the mechanism can be rotated 360 degrees, but as soon as the owner does this, the mechanism will return to its place. By the way, it is often not recommended to do this, as the mechanism can simply break down, and then a complete replacement will be required.

It should be noted that the adjustment of plastic windows without specialists requires special attention and patience. As soon as one head is twisted, it is worth checking how tightly the window closes. As a rule, adjusting one head does nothing, therefore, gradually twisting the rest, you can check the tightness from all sides and all the sashes of a metal-plastic window.

another way

When setting up plastic windows, you should pay attention to the condition of the seal. Often the cause of drafts from the cracks lies precisely in its wear. This seal is made from rubber. If the material is not properly looked after, then soon it will be possible to notice that no adjustment of the windows can save the owner from the penetration of cold into the room.

So that the seal does not wear out much, you should use a special silicone grease which motorists love to use so much. Thanks to it, the rubber is covered with a special molecular film, which lasts for six months.

Over time, the seal can be completely changed, and then the window settings will become even easier.

What problems can arise when adjusting windows?

To date, some plastic windows have complex structure. Naturally, setting up plastic windows with your own hands in this case can cause certain difficulties. Such windows often require proper preparation by winter, so one adjustment in this case is not enough.

Windows require special attention, and if they are not switched to summer or winter mode in time, then their service life will soon come to naught. It is important to remember that if they are always in winter mode, they will soon fail, or rather, the seal will deteriorate. Switching from winter to summer mode is also beneficial because more fresh air will enter the room.

Some are wondering how to adjust plastic windows on their own. It should be noted that all manipulations are performed very simply, so you do not need to seek help from specialists. Most often, difficulties arise when cylindrical eccentrics are used in fittings. Before starting work, you must first carefully examine all the elements of the window lock and try to adjust the screws. Window manufacturers usually leave their recommendations, so you can use their tips.

Step by step adjustment

When setting up plastic windows is required, you should follow some recommendations:

It is necessary to carefully examine the end of the sash. This part of the window is moving, with cylindrical elements that, when moving, go into the window frame and fix the sash in one position. Among the elements you can see two stripes, which are divided into two semicircles.
To switch the window to winter mode, simply turn these strips towards the street. In this case, an expansion is obtained, and the window sash automatically falls into the bar, while the frame is pressed harder, and air cannot freely enter the room.
You can return windows to summer mode in the same way, but for this you need to turn the sash in reverse side, more precisely, in the direction of the room.

Innovations in setting windows for winter

To date, windows with are considered innovative. In this case, this term refers to windows with three-chamber double-glazed windows - such glasses allow you to save heat by 70%. Some believe that these windows are absolutely not suitable for the summer period, but it is safe to say that they will reflect the energy of the sun.

You can freely install a climate valve on plastic windows, then setting up plastic windows with your own hands will become even easier. In this case, without any effort, you can make it so that the air from the street will not enter the room, and, conversely, make sure that there is more fresh air in the house, providing good ventilation. Using the mechanism correctly, you can achieve the expected results.

If the window cannot be adjusted, then you should take care of replacing the seal. After all, when the product is used for a long time, then setting up plastic windows can be almost impossible and all that remains is to replace the seal. Over time, it may lose its properties, cracks appear in it, and recommendations for switching to winter mode will not give the expected effect.

It will not be difficult, you should buy suitable material and carry out appropriate manipulations. It is advisable to carry out the replacement not when the house becomes cold. The old seal is removed from the upper or lower corner, as soon as this work is done, the grooves should be processed, or rather, they should be cleaned of dust and dirt, otherwise the new seal will not be able to lie as it should. After that, a new sealant begins to be laid from the upper corner, which is applied over the entire width.

It is very important to carefully monitor that it fits snugly. Only when all the work has been done, you can begin to fix the new seal. In no case should the rubber be stretched, since then it will not match the size of the window. Remember that it is also not recommended to turn the eccentrics all the way, otherwise the seal will need to be replaced again. If you follow all the recommendations, the adjustment of the window will be quick and efficient.