Do-it-yourself coordinate vice made of metal drawings. How to make a carpentry vice with your own hands? Do-it-yourself vices have disadvantages

A vise is one of the most important tools in any workshop. It allows you to expand the range of work and increase efficiency: thanks to them, the hands of the master are free, and the processing of parts is carried out on high level and without outside help. Few people know that enough high-quality vise can be made by hand. It is only necessary to show a share of ingenuity, skills and attentiveness. Next, about the intricacies of the tool creation process.

Vices are widely used in construction work as a holding tool for various parts. The product in question is presented in the form of a base (body) with two clamping tubes that allow you to firmly hold the part during milling, planing or drilling.

A vice is considered one of the main locksmith tools, because the quality of their parts will depend on the strength of fastening parts. final processing. In addition, such a product frees both hands, thus allowing you to carry out certain processes as accurately as possible.

Depending on the operational features, the vise is divided into two categories: carpentry and locksmith. The latter, in turn, are divided into rotary and static. Static locksmith vise are chair and parallel. The former do not have elements for permanent fastening and are more easily mounted / dismantled. The latter differ more overall dimensions and attached to working surface thoroughly.

Locksmith vices are designed primarily to work with enough soft materials: plastic, wood, etc. They have high clamping jaws that are either fixed statically or rotated on the base.

Machine tools are designed to work with hard materials, for example, metal. Their clamping jaws are less high for greater convenience and work efficiency.

Making an instrument at home

To make a vice with your own hands, you need to prepare a certain set of materials and tools:

• metal plates;
• pins;
• boards;
• Metal rod with a diameter of about 2 mm;
• fasteners.

From the tools you will need a minimum: an electric drill, a sledgehammer, a file and a hacksaw. With your own hands, it is easiest to make a bench vise, so the following is presented step-by-step instruction to create just such a tool:

Advice. Homemade vise can be more efficient and convenient because it is quite possible to adapt them to any specific operation.

If you plan to make a vice with your own hands, you should take into account some of the nuances that will determine the strength and durability of the tool:

• Material. Steel is most often used to create a product. It is advisable to choose high-quality, since the reliability and durability of the product, as well as its ability to firmly hold the part during its processing, largely depend on this.
• Product size. If you plan to work mainly with small parts, it is better to give preference to a compact model: it will be more convenient and easier to work with it.
• Thread pitch. Important point which is often overlooked by many. The thread should be clear and fine if spot work is planned.

• Sponges. It is important to pay attention to the size and shape of this element. The first indicator depends on the type of products to be processed, the second - on the materials of the workpieces. If you plan to work only (mostly) with soft materials, it is better to make the jaws flat.

Advice. Because you're making your own vise, you can go beyond the standard model to make the best tool for your needs. Remember that with the help of an additional option, you can make the vise more efficient in work. So, for example, the presence of a rotary mechanism in the product will allow you to work with small parts.

That's all the subtleties that you should know about creating such a tool as a vise with your own hands. As you can see, this process is quite simple, and the result of the work will please even experienced craftsman. Good luck!

How to make a vice with your own hands: video

Locksmith vise are necessary equipment in the workshop of any man, without whom it is difficult to do in this or that type of work.

It is not at all necessary to place them in the garage; you can arrange a vise corner at home, for example, using a table or an ordinary stool for this.

What are locksmith vise for?

When processing or sharpening any part, it is necessary to fix it firmly and securely, that is, to keep it in a certain position. The photo of the vise shows the principle of operation of this equipment.

The parameters and dimensions of the vise are determined depending on what type of tool you need to firmly hold.

The design of the carpentry vise includes:

• chassis screw;
• handle;
• movable and fixed sponge;
• base plate.

The main types of locksmith vise

Beforehand, how to make a vise with your own hands, you need to decide on the choice of work related to them.

All types of vices are divided into two types:

• no turning have more simple design And they are the easiest to make yourself. The part is fixed strictly in one position.
• swivel vices are most often adapted for drilling on a machine. During operation, it is possible to rotate the workpiece without unclenching it.

The material of the vise body is most often made of durable cast iron. It is important to know that cast iron is not intended to be exposed high temperatures, steel metal is suitable for these purposes.

If the work will be carried out with small-sized parts, you should not increase financial costs and make compact small vices.

A small vise with a ball joint base is useful on the farm for processing very small parts that can be fixed individually. These are mini-vises with suction cups, mounted on a glass or well-polished surface. But they are suitable for rare frivolous works.

Please note that it is wise to introduce soft nozzles on the fastener to work with soft parts so as not to provoke damage to them. A vise with the least backlash, with the jaws fully retracted, is ideal.

A vice without a rotary mechanism will significantly save money, unless, of course, it is useful in work.

Work on the manufacture of locksmith vise at home

Carpenter's vise, self-made at home, will significantly save the family budget at times than their store-ready "brothers". And a huge plus is that the product can be made according to personal preferences and for certain individual species works.

It is absolutely easy to find material for construction, it can be: technical pipe, used jack, old lathes, presses, etc.

And if you go to a metal collection point, there will undoubtedly be a suitable vise part that will cost you a penny.

Classic Homemade Vise

There are many types of vise, but the most popular and traditional is the type with steel material. Such a vise will be much more reliable than bought factory-made.

The design consists of:

Note!

• a steel plate of at least 3 mm., but it can be much thicker;
• channel external and internal (120 and 100 mm.);
• steel ears;
• turning cutters 2 pieces;
• a small piece of reinforcement (rod for the gate);
• nut (2 pieces), stud or screw of a certain diameter that matches the bar;
• washer (2 pieces) of the same diameter with a lead screw;
• screw pair 335 mm;
• a thick plate is needed to secure the undercarriage of the screw.

It is necessary to separate the lead screw with washers on both sides of the plate. One of the two washers must be secured with a cotter pin or a retaining ring so that the part is completely collapsible, you must first weld the thread from the screw to it.

The handle should also be collapsible on one side, and reverse side it is worth welding it with a nut. It is necessary to weld a nut with a channel from the screws flush to the plate. In order for the channel inside with the screw to move easier on the go, it is recommended to lightly process it with a file.

Sponges are welded to the so-called ears, made of turning tools. They are placed in the right place when the lead screw is screwed in, so the ears stand at an ideal distance from each other.

But you can also link them with wire for greater convenience, so in the future it will be more convenient to fix uneven parts, the shape of which is expanded to the bottom.

Such homemade vise allow larger parts to be machined.

Note!

To perform work in the home workshop, it is recommended to choose the simplest fixed vice for the machine.

It is not difficult to make them yourself, you just have to watch the video and recommendations, which can be easily found on the Internet and preliminarily correctly draw up drawings.

DIY vise photo

Note!

If you have to change your workplace, you can equip each of them with a personal homemade, do-it-yourself vise. Their design, like everything ingenious, lies on the surface and is simple but very effective, like much of what the famous offers. House master V.Legostaev.

Any self-respecting do-it-yourselfer has a vise. However, a real full-fledged tool today is not only expensive, a good vise is also bulky and heavy. My workshop is actually the whole site: I have to work in different places, and vices are needed very often. It turns out that you need to drag a heavy tool every time or run back and forth all the time to process parts.

Vise=Two tubes

It is known that gas and water pipes are produced in such a way that any pipe must fit tightly inside the pipe of the next size. Given this, I decided to take two pipe trimmings of two adjacent sizes. I inserted it into a large pipe and, using electric welding, attached it to one of the ends

flange with nut large diameter- M16. On a smaller pipe, I installed a similar flange with a nut using the same electric welding, but bigger size-M18. The M16 threaded stud in such a hole should rotate smoothly.

It was to this stud at a short distance from the end that he installed a nut, which he securely fixed with the help of electric welding. After that, I inserted the threaded stud into the cavity of the small pipe so that the fixed nut was inside the pipe and rested against the flange with a large hole. I screwed another nut onto the protruding end of the stud and also fixed it by welding. Between the flange and the nuts, I pre-installed intermediate sliding washers. Now screw the end of the threaded stud that is sufficiently sticking out of the pipe into the nut big pipe. It turned out the main working element of the vise. It only remained to install the pressure plates (sponges) and support plates (paws) on the vise. I made sponges from a square pipe, paws from a corner. And the vise is ready!

For ease of maintenance, a nut was welded to the protruding end of the threaded stud in such a way that, by inserting any rod into it, it was easy to rotate the axis and control the vice.

Do-it-yourself vices have disadvantages

When working on such a vise, the inner tube can rotate behind the pin, but this does not scare me at all. You just need to hold this pipe in the right position when fixing. Yes, and it is not difficult to eliminate this drawback - it is enough to install a latch.

It is even easier to make a vice from two scraps of square pipes that are close in size. All technology remains the same.

Do-it-yourself vice - photo

Do-it-yourself vice: drawing

1 PC. A3-A5 LED luminous drawing graffiti drawing board ...

202.24 rub.

★★ ★★ ★★ ★★ ★★ (4.20) | Orders (114)

A3 A4 A5 LED Luminous Drawing Graffiti Drawing Board ...

Having made these vise for his carpentry workbench, you can fix wooden blanks with a thickness of at least 150 mm. The simplicity of the design allows you to repeat the project with your own hands, with minimal skills in welding and carpentry.

The appearance of a carpenter's vice without wooden jaws.

Tools and materials

To process steel elements of a carpentry vice, you will need:

1. Bulgarian.
2. Brush attachment.
3. Metal disc.
4. Welding inverter.
5. Electrodes.
6. Drill and drills.

For the manufacture of wooden parts, you need an electric saw, a planer and a grinder.

Pick up two steel pipes round or square section so that one pipe fits snugly into another. Use a threaded rod with a diameter of 12–18 mm as the lead screw. Prepare corners for screeds, the walls of which should be 2 times wider than the hole drilled for the screw.

Lubrication points are marked with red dots.

Explanatory drawing table of significant details and dimensions of the metal part of the carpentry vice

We make a carpentry vise for a workbench with our own hands

Cut the parts with a grinder and make grooves at the ends of the corners to the size of a square profile pipe. Select suitable washers and bushings for the clamping assembly, the inside diameter of which must match the gauge of the threaded rod.

Fix the ties with clamps and weld them to one profile pipe.

Install the second guide strictly parallel to the first and weld the parts.

Attention: even if you are a non-professional welder, you will have to try and make welds that provide sufficient structural rigidity.

Treat the top plane with a grinding disc, removing all protrusions.

Insert the movable guides, align their ends and press the screed corner against them. Fix the parts by welding.

Install vertical corners and weld them.

Drill holes for the screw in the middle of the corners. When marking their location, keep in mind that the rod must lie in the screed of the moving part so that the thrust washer can rotate.

Secure the drive nut by welding. Assemble the clamping unit: first, weld the collar bushings to the stud.

Now install the movable sleeve and weld the thrust washer. To withstand the gap, insert a strip of thin tin under the corner.

Take care of the collar. If you use a half-inch pipe for it, then the nuts at the ends can be welded or fastened to the thread, followed by coring.

Make mounting holes and clean the surfaces from scale and rust.

Coat the carpentry vise with primer and paint.

Proceed to the manufacture of wooden elements of carpentry vise.

Drawing of the wooden parts of the carpenter's vice: 1 - small fixed sponge; 2 - large movable sponge; 3 - support bar.

Prepare planed planks 22 mm thick from hardwood: make an allowance of 15–20 mm in length, 3–4 mm in width, and for workpieces of a movable sponge, instead of 80 mm, take 85 mm. Saw off the support bar immediately to size from pine.

Glue two blanks.

After the glue has dried, cut the parts to a length of 320 mm.

Cut the fixed jaw to a fine finish and sand its front side. Fasten wooden details on the corners with screws through the auxiliary holes.

Place the vise on the workbench, aligning the fixed jaw with the edge of the worktop. Secure with clamps and mark the drilling points.

After removing the fiberboard from the workbench cover, drill holes for the mounting bolts.

Make indentations in the countertop for the hats with a feather drill.

Fix the vise with bolts with a diameter of at least 10 mm.

Cut the movable jaw in thickness and cut a groove for the weld.

Place the sponge in a vise and mark its exact height.

Remove excess wood with a planer and set the part in place.

Apply finishing compound to wooden elements, lubricate the rubbing parts of the clamping unit and the running nut.

The considered design of the carpentry vise is both simple and reliable. Make this clamping device for your home workshop.

It is unlikely that in the home workshop there will be a more necessary device than a bench vise. Even if you mainly work with wood, sometimes you will not be able to do without a vise. And if you don’t have a workshop, garage or a corner in your apartment where you can repair simple household utensils, having a small bench vise can help out a lot in many situations, turning kitchen table or even a stool for a mini-workshop.

First of all, about the appointment. The task of the vise is to securely fix and hold the part or workpiece during its processing. various tools. Depending on what objects mainly need to be fixed in a vise and what tools you have to work with them, the design parameters of the vise vary. But the most universal and most common look like this:

The basis of any vice is a screw pair. In most cases, the screw is fixed in the movable part of the vise body, and the nut in the fixed part, which is either directly or through rotary mechanism attached to locksmith's workbench or a special stand that ensures the immobility of the vice during any operations with the part fixed in them.

Types of locksmith vise

In addition to having a solid base, you need to be clear about the kind of work you will be doing and match your choice of bench vise with it. First of all, it concerns the material of the case. In the post-Soviet space, it is more often cast iron.

This material is hard, wear-resistant, but rather brittle. Therefore, if you are not going to bend thick steel blanks with a sledgehammer without serious preliminary heating, then feel free to take such a vise, and if you are going to, it is better to look for steel ones.

If you need to regularly fasten workpieces in such a desktop vise cylindrical shape, then it is desirable to make an overlay on the sponge with a triangular cutout. And if such operations are quite frequent, then we advise you to consider options for the design of a locksmith vice, somewhat different from the standard ones.

In general, if we talk about the functionality of a bench vise, then first of all you should think about the size. If you know for sure that you will not have to work with large parts, then do not pay for extra metal, and perhaps even consider a compact machine vice.

Or vice versa - it is possible to work with large-sized parts, but without much effort in their processing. Then we can consider the option of a vise with the possibility of preliminary spreading of the jaws without using a lead screw.

If you do not have a workbench, and also in the list of works there are more operations that do not require the application of a rough physical strength to the workpieces, then the option with a desktop vise fixed with various clamps is yours.

True, the latter are mini-presses, it is better to have them on the farm as additional ones. Big details you can’t clamp them, and you won’t put serious efforts on the workpiece being processed - there isn’t enough clamp pressure to hold the vices themselves, but making a key to the lock according to the model is just that.

In addition, such vices are sometimes indispensable if you need to unscrew a stuck nut when you can use them as hand tool. Despite the miniature size, the pressing of the sponges is very good.

It is also worth mentioning a small vice on a ball joint, which serve for the convenience of processing very small parts of complex configuration, allowing processing various surfaces details from one fixing.

It is clear that the clamping force of the ball joint is not enough for serious physical exertion, so such a vise is suitable for rather specific types of work. The same, in our opinion, not very serious, will be vices with fastening with a suction cup.

For their more or less reliable fastening, either a well-polished surface or glass is needed. On other surfaces, it is unlikely that they will be able to securely fix them. And their functionality is also small.

For all types of locksmith vise, you will obviously need additional pads to secure parts made of soft materials.

Some table vise have a pneumatic actuator, greatly facilitating the process of fixing the workpiece.

But if you don’t have a metalwork mini-production at home, then such a vise is unlikely to be useful to you.

What else is important to know when choosing a bench vise? There are quite a lot of complaints from users about Chinese vices with cast-iron bodies, equipped with clamps for fastening - they often break off, so if you want a cheap vise from China, then it’s better to choose from steel.

Choose a vise that, with the jaws as wide as possible, has the least play between the parts of the body. Also, if you do not need a rotary mechanism at the base of the vise for work, choose a model without it: save money and increase structural rigidity.

How to make a bench vise with your own hands

The question is: why, with such an abundance of sizes, shapes and configurations of locksmith vices offered by the distribution network, to deal with them independent execution. When making a bench vice with your own hands, you can save up to 10 times in cost, as well as make a device with the specified parameters.

And this is absolutely real, because almost everything that can be useful for making a desktop vise can be found at scrap metal collection points for mere pennies.

This is especially noticeable in the photograph, in which parts of a sanitary pipe valve with a flywheel are used as a screw pair.

You can also take a screw pair from an old vertical jack. Even if part of the thread has already worn out slightly, then, as a rule, this is a small area from the edge of the screw, which will already need to be cut to shorten it. The lead screws of old lathes, screw presses, etc. are also very durable.

At worst, for very little money, you can order a turner at the nearest vocational school such a pair with a wide nut, with a conventional metric thread. Just make the diameter bigger, and the nut wider. In this case, the clamping force is redistributed over a sufficiently large area due to the diameter of the screw and the number of turns.

IN last resort, just buy a larger stud in a hardware store, and a high nut to it or 3 ordinary pieces, which you then weld in series, wound onto the stud.

The classic version of homemade desktop vise

From the photograph, steel parts are clearly guessed, almost always easily selected at the nearest second-hand metal:

• steel plate 200 x 200 3 - 6 mm thick (possibly thicker);
• 2 channels (120 mm - external, 100 mm - internal) with a length of 160 mm and 300 mm, respectively, in your case, the dimensions may be different depending on the length of the lead screw;
• steel ears from some large-sized container;
• 2 worn turning tools;
• a bar for a crank, in this case a piece of reinforcement;
• screw or stud corresponding to the diameter of the bar, and 2 nuts;
• 2 washers, with a diameter corresponding to the diameter of the lead screw;
• screw pair - any of those described (in this case, ordered by a turner), 335 mm long;
• strong plate for fastening the lead screw.

The lead screw is separated from the plate on both sides by washers, one of which is welded to it from the side of the threaded part, although with this diameter it can be fixed with a cotter pin or lock ring. Then this assembly will be completely collapsible, which is clearly better for reasons of maintainability.

The handle on one side is damped with a welded nut, and on the other side it is made collapsible, after welding a thread from a screw of the corresponding diameter to it.

The nut from the screw pair is welded to the base plate flush with the 120th channel.

For the normal entry of the inner channel with the lead screw fixed on it, its ribs need to be slightly filed.

Ears with jaws welded to them, made of cut turning tools, must be positioned with screwed lead screw. So they will take the exact place. You can even twist the sponges together with soft wire, ensuring their perfect relative position.

You can also pre-cut them with an angle grinder with a metal cutting disc.

Due to this fastening of the jaws, namely the shape of the hooks and the distance between them, it is possible to fasten non-standard parts expanded to the bottom in such a vice.

And the maximum thickness of workpieces processed in this vice is very impressive. And there is no need to talk about the maintainability of such equipment - you can see for yourself.

Dear readers, if you still have questions, ask them using the form below. We will be glad to communicate with you;)