Decorative screen for zoning a room with your own hands. Making a screen with your own hands

Screen - mobile partition, which allows you to hide from outside view the action taking place behind it. You can use it in different ways - they use the screen in medicine, and in the theater, and at enterprises. for various purposes, and in offices and, of course, at home, as a way of zoning a room. Such partitions are easily removed, folded and hidden in a far corner, as they say, out of sight. They have many advantages, and it is for this reason that, together with the website, we will pay a little attention to this product and tell you how to make a screen with your own hands?

Screen accordion photo

How to make a screen with your own hands: choose the material

The interior screen is a rather ancient product, and people have learned to make it from a very large range of different materials. The only trouble is that not every one of them is easy to process at home - in this regard, the choice will be somewhat limited. Among the most available materials In terms of self-processing, the following things can be distinguished.

In principle, there are other materials that make it very easy to make a screen for a house with your own hands. For example, for the manufacture of a frame (frame), a material such as polypropylene pipe- after fitting with a fabric, its entire nondescript appearance is completely hidden. You can use rattan as a frame filler, you can also weave macrame or come up with something even more original.

Screen making process: three steps

Globally, the entire process of making a screen for a room with your own hands can be divided into three main stages, each of which has its own subtleties and nuances, which you will have to follow at least in order to really succeed. beautiful product. Let's start in order.

Framework. You will need several of them - at least two, a maximum of a dozen. In general, such a plan can have many sections, but it should be understood that if there are too many of them, then the screen will turn out to be heavy and it will be almost impossible to transport it. So if you have a need to make a screen of great length, then you should think about making several separate products. But back to our framework - there are not so many requirements for their manufacture (except for aesthetic ones). First of all, this is the rigidity of the structure - it is ensured by reliable fastening of the elements and the installation of additional transverse jumpers. Secondly, a clear geometry - all corners of the frame must be within 90 degrees. If there are no even right angles, then the screen will have a skewed appearance. Basically, these are all the highlights. Now, as for the assembly - if we talk about wood, then frames are assembled from a bar. In fact, you will need to screw into the frame two long bars (they set the height of the product) and three or even four short bars that set the width of the screen section. The most reliable fastening of the bars with each other is provided by furniture confirmations.
How to make a screen with your own hands photo
Section filling. It all depends on what material you choose as a filler. If this is glass, then it is installed according to the principle of window glazing - that is, first you nail a bead inside the frame on one side, then insert the glass and install the bead on the other side. With fabric, things are a little more complicated and here you can go in two ways - the drapery can be nailed directly to the screen section and hide the junction with a rail or the same glazing bead. And you can make a separate frame for the fabric, cover it with fabric and install it using glass mounting technology. The second option is better, since you get an easily replaceable element - in case of a tear in the fabric, it will not be difficult to repair the screen. In general, any other material that you come up with to fill the sections of the screen is mounted using similar technologies. Even rattan or macrame weaves are first assembled on a frame and only after that they are installed in sections with the help of glazing beads.
How to make a screen for a room with your own hands photo
Assembly. There are only two things you need to do here. First of all, it is to connect all sections into one single product - such a connection is made with the help of canopies, which you can choose both in size and design in almost any hardware store. There is only one nuance here - you need to make sure that the sections fold in different directions. In the sense that the first is on itself, the second is on itself, the third is on itself again and the fourth is again on itself - only such a sequence will ensure compact folding of the screen for the house. In general, ideally, you can pick up such loops that will ensure the folding of the section in any direction - however, in this case there will be a gap between them. If he does not bother you, then such a decision will be generally ideal option. The second point is the installation of the screen on rollers or on a stand. In general, it is necessary to give stability in the unfolded position and this can be achieved in only one way - attach a cross rail to the bottom of each section and equip it with rollers for better transportation. In principle, this is a simple moment, with which it is not surprising to figure it out on your own.
Screen for home photo

As you can see, everything is very simple, and there are no particular difficulties in the process of making a screen for the house. The main thing is to have the desire to do all this with your own hands and treat the process of its manufacture creatively and with all responsibility.

In conclusion, the topic of how to make a screen with your own hands, I will say a few words about the manufacture of partitions made of glass or monolithic polycarbonate. Such screens are made even easier, especially when it comes to material such as plexiglass () - all that needs to be done here for the design to work is to purchase the right fittings, that is, awnings and supports. When you buy this whole thing, the process of making a screen will be reduced to a banal assembly. It will only be necessary to drill holes in the right places and combine pre-cut sheets of plastic into a single product.

2. French connection. The screen can not only divide, but also unite. Installed in a wide space between the windows, it turns out to be the center of attention, preventing the space from “falling apart” into pieces. A screen by Jean Cocteau, a couple of sheep and photographs by Pierre and Gilles bring an element of artistry to the rather conservative interior of this bedroom.

3. Collected works. Decorating screens with fake paintings is a long tradition. Such an object is able not only to model space, but also to fill it with new meaning. For example, with the help of a screen depicting shelves with books, it is easy to turn any room into a reading room. And at the same time to emphasize that the owners of the house are intelligent people and are not indifferent to the printed word.

4. Open book. To study in detail the skillful painting on the wings of the Japanese screen, you need to place it at eye level. To do this, you will either have to sit on the floor or hang a screen on the wall. The plot must be read from right to left. At the same time, it is advisable to dim the light - after all, twilight reigns in Japanese houses. Then the gold on the screen will shimmer, not scream, and the colors will become soft and refined.

5. The third way. This semi-empty hotel interior, designed in a neutral color scheme, had every chance of becoming one of those transit zones that do not "catch" the eye. The situation was saved by a screen, thanks to which the room acquired a new dimension. Of course, we are not so naive as to take the painting for a real landscape. And yet the city streets stretching intoperspective, involuntarily suggestive: where to go next - right, left or straight?

6. Hang to the fullest! To fulfill its original purpose - to intrigue and hide - such a screen will not be able to. But thanks to her, in your bedroom there will be no cluttered corners that need to be hidden from prying eyes. For greater practicality, a mirror can be inserted into one of the doors of such a mini-dressing room.

7. Divide and Conquer! Make the kitchen isolated or combine it with the living room? The truth lies in the middle, and its name is a screen. For example, the owner of this Parisian loft uses the rare Claustra screen, invented in the 60s by the Cloutier brothers, as a partition.

8. Submission from the corner. This corner is a typical "dead zone" - the approach to it is blocked by armchairs and a table by the fireplace. The screen does not just "justify" the existence of this nook. Its mirror doors reflect light and visually expand the space. The only problem is that the screen is located near the head of the bed. Think carefully whether such a neighborhood will suit you: admiring your sleepy physiognomy in the morning is not entertainment for everyone!

9. Holy place. The age-old problem - how to use the space under the stairs - designer Kelly Hoppen solved with the help of a screen. openwork design from black lacquer rings became the background for the yellow "eared" chair. However, in this interior, the screen solves not only decorative, but also spatial problems - it serves as a "watershed" between the dining and sofa areas.

10. Reliable rears. Sitting with your back to a door or window is extremely uncomfortable. In this interior, the problem is solved by a screen that forms a kind of niche and gives a sense of security. I can’t even believe that we are not in front of a cozy old mansion, but a modern open space.

11. About times, about customs! Since screens first came to Europe, interest in them has faded, then flared up. Another surge happened during Art Deco, when screens made using lacquer, metal and glass came into fashion. The photo shows a typical representative of that era, although this is not an antique, but a skillful stylization. The author of the object is a modern American designer Thomas Fizant.

12. Everything on the side. Sometimes screens take on the role of architectural elements (such as columns, niches, etc.), changing the proportions of the room and setting it in a solemn mood. Installed on either side of the bed, they form an alcove.

13. Under 16 and over. As they say, comments are superfluous. Before us is an object - useful in all respects. It remains to add that such a screen is useful not only in the nursery, but also in the office or, say, in the kitchen. If you don’t like chalk (it crumbles, after all), insert a magnetic board with a special coating into one of the doors, on which you can write with felt-tip pens.

14. Everything is a head! The screen often acts as a headboard. Here this idea is brought to its logical conclusion: The doors are upholstered in the same fabric as the bed valance and armchair upholstery. But you can do otherwise - play in contrast, making the screen a central element of the interior.

Learning Theory

Answering the question of how to make a screen with your own hands, we can say that in the very general view it looks something like this: you need to make frames, then stretch the material over them and connect the frames with hinges so that the screen can be folded. At the same time, usually the width of each screen cloth is about 50 centimeters, and their height is approximately 170-180 cm: it is precisely if these dimensions are observed that this element of the interior will be easy and pleasant to use.

It is also worth noting that a classic screen, as a rule, should have three or four separate parts, which are usually made from canvases of the same size and pattern. To create a screen with your own hands, you are more likely to need the following tools: a hacksaw, a drill, wire cutters and pliers. If you aim to create a model using metal structures, then you will need a hacksaw and a welding machine.

Let's try in practice

In order for our conversation with you about how to make a screen with your own hands to become concrete, you can write down the “recipe” for its “cooking”. So, you will need 6 blocks of wood, having a length of about 2 meters, and 6 shorter bars, from which the width of the screen will be formed. You will also need to purchase fabric in any color you like. In this case, you should start from the place where this screen will be located. So, for example, for a children's room, you can choose a more cheerful and bright fabric that will create a playful mood for the baby.

In addition, to create a screen with your own hands, you will need to prepare 4 door hinges: in the event that your accessory has three wings. Also, do not forget about the paint brush and varnish, with which you will put in order the frames for the screen. It is worth noting that when doing this work, you also cannot do without nails and a hammer or self-tapping screws. At the same time, some experts use a stapler for furniture and various elements of decorative trim.

The technique for performing the work will be as follows:

You need to create a frame from the bars. To do this, we make 3 wooden frames, and then fasten them to each other with screws.

By using door hinges fasten the frames together. In order for the base for the screen to be completely ready, cover it with varnish and let it dry well.

Cutting the fabric the right sizes, while leaving 2 cm from each edge to the hem. Then the resulting blanks are carefully pulled onto the frames and nailed with a furniture stapler. It is very important that the fabric is stretched strongly and evenly. If desired, you can decorate the resulting screen with any decorative elements.

Otherwise, the hand-made screen is ready and you can put it in its place and enjoy its beauty and privacy.

________________________

A screen - a partition is quite an interesting and versatile element of decor, thanks to which you can easily zone a room. Therefore, if you would like to create separate zones in different rooms, then feel free to start making a screen - a partition.

Such a home screen - a partition is quite simple to manufacture, just prepare everything necessary materials and tools.

. Wooden bars 2 m long, 6 pcs;
. Wooden bars along the width of the room (measure the width of the room by dividing by 3) - 6 pcs;
. A piece of dense fabric (choose colors according to your taste or to match the interior);
. tassel;
. Door hinges- 4 things;
. Varnish;
. Furniture stapler;
. Glue;
. Self-tapping screws - screws;
. Nails;
. Hammer;
. decorative braid

Instructions for making screens - partitions

1. First you need to make a frame for the screen. We use prepared wooden blocks. From the prepared bars you need to prepare 3 wooden frames by connecting the bars together with screws.
2. We connect the frames with each other with door hinges.
3. Using a brush, open the frames with varnish to add shine.
4. From the prepared fabric, cut 3 cuts for each frame in accordance with the dimensions of the frames.
5. Glue each of the pieces of fabric with glue to one side of the frames, then fix with staples with furniture stapler. Next, stretch the fabric, and secure with staples on the other side of the frame. Make sure that the fabric is stuffed evenly and symmetrically.
6. Front side screens - partitions are ready, now you need to aesthetically arrange inside screens. To do this, use the prepared braid, which is carefully glued to the trimmed edges of the fabric.
After that, all the main work is over and your screen - the partition is ready for use. If you wish, you can easily additionally decorate the screen by decorating it with applications, original inserts and photographs.

We are confident that a hand-made screen - a partition wall, will be a wonderful decoration for your home. Creative success and good mood!

___________________________

The topic of this article is do-it-yourself screen.

As I said in my article, you can zone a room different ways. Including with the help of a screen.

This is very convenient option, which allows you to change space at the speed of light! Especially if you have several screens of different designs (or the base of the screen is the same, and the panels (filling) are different). After all, the mood can also be different - and the world around should change accordingly!

Panels can be made of fabric, wood, plastic, stained glass.

It is necessary to proceed in the design of the screen not only from the style and color of the interior, but also from the functions that our screen should perform. If it is necessary to tightly fence off some part of the room, then it is necessary to choose less transparent materials. It can be wood, opaque plastic, opaque fabric (or light, but very tightly gathered), possibly a stained glass window.

If you only want to visually separate part of the space, then you can limit yourself and transparent materials, or even make a screen with decorative holes.

And if necessary, the screen can be safely set aside in a corner and free up space, for example, for a party!

You can make a screen quite calmly with your own hands. In addition, you will know for sure that no one else has a screen like yours! With this guide you will make it quite easy!

If you have children, this is a great opportunity to connect your child to the creative process of creation! Everyone will have fun and interesting! The main thing is to connect a little imagination!

You can safely use almost everything that you find at hand: bright shreds of colored fabric, old broken hairpins, pieces of leather (can be cut from an old bag), beads, beads, paints, various ropes, child's drawings, photographs, etc.

And if you feel the strength to do it - go ahead!

So, for the manufacture of a wooden frame, we need the following tools and materials:

Directly the wooden planks themselves (we recommend taking pine planks 6 cm wide and about 2 cm thick). There should be 24 pieces: 1.70 m long - 12 pieces, 0.6 m long - 12 pieces. (or take 6 pieces of 1.2 m each).
Designed for a screen with three wings.
A simple pencil with a square.
Joiner's glue with a paint brush.
Varnish for wood.
Sandpaper.
The chisel is thin.
Joiner's vice - 4 pcs. (It can be less, but then the process itself will take longer).
Hammer.
Hacksaw.
Wood screws (D = 3 mm, length can be taken 1.5 cm). Approximately 100 pcs.
Screwdriver (if any).
Steel corners - 12 pcs.
Loops - 6 pcs. or 9 pcs. (depending on the type of loops)

First.

So, we take our wooden planks, retreat on each approximately 6 look at the edge on both sides, mark a line parallel to the edge of the plank.

Note: These lines should be on the same side of the plank.

Second.

Along these lines we make a file with a hacksaw to the middle of the thickness of the plank.

Third.

We take a hammer and a thin chisel and make cuts (we remove the tree by about half the thickness of the plank) to the line we marked and file.

Fourth.

We take two long strips and two short ones, apply glue to inner part cut and assemble the frame. We clamp the places of gluing with a carpenter's vice and wait until the glue dries.

We do the same with the rest of the planks.

Fifth.

It is necessary to sand the resulting frames sandpaper. Then coat them with wood varnish.

Sixth.

Now we take the corners and fix our frames with them in the corners.

Decorative partitions were first made in China. Today, screens are used to decorate the interior and its zoning. How to make your own screen with your own hands?

How to make a screen with your own hands - materials

To make a wooden frame screen, you will need:

12 pine planks 170 cm (6 cm wide, 2 cm thick);
12 pine planks 60 cm (6 cm wide, 2 cm thick);
pencil;
square;
wood glue;
wide brush;
light varnish for wood;
hacksaw;
thin chisel;
hammer;
joiner's vice (4 pcs.);
screwdriver;
sandpaper;
12 steel corners;
96 wood screws with a diameter of 3 mm and a length of 1.5 cm.

How to make a screen with your own hands - manufacturing

Step back 6 cm from the end of each pine plank. Draw with a simple pencil a straight line along the wide part of the planks.
To the middle of the width of the planks, we make cuts with a hacksaw along the marks marked with a pencil.
From the end of the planks, using a hammer and a chisel, we begin to remove the tree in layers, forming cuts.
Apply glue to the notches and connect the short planks to the long ones into a rectangle. Fix these points of the frame with a vise. Now you need to wait until the glue dries.
After complete drying, sand the frames with sandpaper and coat with a light wood varnish.
To prevent the frames from falling apart in the future, attach the corners with screws at the corners.
Thus, you got 6 separate frames and it's time to start decorating them and final assembly screens.

How to make a screen with your own hands - screen decor

The easiest way to decorate a screen is to use fabric. Choose its density and color according to your taste (from organza to thick cotton or linen). To fix the fabric on the frame you need to use furniture stapler. If there is no special stapler, then use hot glue. Some designers wrap fabric around frames and fix it with needles. This option is not suitable for those who have small children in the house.

How to make a screen with your own hands - final assembly

The final assembly of the screen involves connecting the frames to each other with hinges. Make no mistake with the mounting side. Your screen should fold like an accordion.

How to make a screen with your own hands - ideas

In fact, screens can be decorated with the most unpredictable materials:

multi-colored glass bottles;
branches;
paper, cardboard and newspapers;
threads and ropes;
garlands;
ivy;
organic glass.

To make your screen easy to move, attach special wheels at the bottom.

A handmade screen will be a real decoration in your home. It is not necessary to build brick walls to divide the space, use mobile partitions for this purpose.

A few centuries ago, the screen was a classic attribute of any interior that claims to be pretentious and tasteful.

Nowadays, with the help of screens, you can adjust the space in the house.

Over time, fashion "pushed" the screen, turning it into an antique, of interest only to fashion historians. Now, when the concept of space zoning is returning to the interior, the screen has again become necessary.

Screen is not just decorative element but a fully functional item.

With it, you can hide what is not intended for prying eyes, complicate or make the space more comfortable, and also turn it into an art object, add theatricality and decorativeness, etc.

In the living room, the screen can be made the main decoration of the room.

The modern screen is divided into various types depending on the structure, materials used and purpose.

The original glossy screen is an element of decor.

And if the purpose of the screen can be the most diverse and depends only on the imagination of its owner, then the most popular types in terms of design are the following.

Sash.

Until recently, this was the only possible view screens. The rigid frame of the sash with a fabric stretched over it (paper, glass inserted into the frame, etc.), the sashes are connected to each other like an "accordion".

A screen for the entire length of the room along the wall acts as a decorative element.

Fastening is made with furniture or piano hinges, in some cases strong soft material(leather, dense fabric, faux leather). Initially, the frame was made of wood, but later it was replaced with lighter aluminum.

Currently, the main material for folding screens is plastic.

Single screen.

This is the main type of office screens. It is used when necessary to divide a large space into smaller, individual "cabinets".

Unusual single-screen screen in the corner for relaxation.

Composite.

Recently, this type has become especially popular among those who love drastic changes in their interior. Such a screen is assembled like a puzzle of several elements. The material is usually plastic, but a textile option is also possible.

At the same time, the number of elements, the material for them and in what order they will go, you can choose yourself.

Flexible.

This type of screen is the latest invention of designers. The design does not consist of separate wings, but is a single wall of flexible material.

The screen can be easily rolled up if necessary, can take bizarre shapes and be used in various situations.

It can be bent at almost any angle, creating not only small areas in space, but even labyrinths. If necessary, the screen is folded and removed.

A novelty in the world of partitions - a flexible screen.

If you are faced with the question of how to make a screen with your own hands, then you need to proceed from the design features. For example, it is not possible to make a flexible screen on your own, because here it's all about the material. Such a screen can be subjected to design changes or assembled independently.

Making a classic folding screen with your own hands is quite realistic.

At the same time, such a screen will have an undeniable number of advantages:

M the material is chosen based on your own preferences, as well as the configuration, height, width, etc.;
W Irma will ideally "fit" into the interior in terms of size, design, color, and style;
C The price for such an individual design is significantly lower than any other analogues;
P If desired, additionally, for example, wood craftsmen, artists or professional decorators can be involved in manufacturing.

Since screens are made from a wide variety of materials, it is important not to make a mistake with its choice for a particular room.

A screen for a room can be not only functionally useful, but also decoratively beneficial.

Materials and tools needed to make a screen

Making a screen with your own hands- not a complicated process at all. Having done this for the first time, in the future, having necessary tools and experience, you can independently improve the technology, develop unique design solutions. But for the first screen, a minimum set of tools and materials will be required. Namely:

Screwdriver and drill;
Construction stapler;
Furniture hinges;
Hacksaw;
screws;
Paint, varnish;
Bars of wood of the required length;
Fabric for internal filling sashes (if glass is used, glazing beads will be additionally needed);
Suitable decor.

If everything you need is available, you can start manufacturing.

The manufacturing process, in turn, is divided into the production of a frame for the sashes, decoration and fastening of the sashes.

Step-by-step instructions for making a frame for a screen

The main element in the design of the screen is the frame of the sash. Therefore, frame screens are most popular for self-production. The wooden frame is a regular frame. It is made in several stages.

If the sash is planned to be solid, the material is chosen as light as possible.

DIY screen ( step-by-step instruction)

Size calculation.

We make the marking of the timber (4x4) with the calculation of six bars of one hundred and eighty and six bars of fifty centimeters.
Sawing timber bars, according to the dimensions produced.
Pre-treatment of wood for the frame: grinding, impregnation suitable composition, primer, painting.

We process wooden blanks with sandpaper or grinder, to smoothness.

It is necessary to carry out preliminary work to close all irregularities and cracks.
There are several ways to connect bars. For example, with the help of spikes (according to appearance this method is similar to clothing "zipper"). To do this, deep grooves are made along the edge of both bars with a drill.

This connection is the strongest.

After making sure that the recesses exactly match, they are smeared with glue and connected using spikes of suitable size.
You can also connect the bars with screws. Creating a frame, when attaching the bars, you can leave space for the legs.

We fasten all three sashes in this way.
Coating with paint matching the color of the interior (stain).

After completing the surface preparation of the future screen for the house, paint the tree with the paint you like.
Lacquering in two layers.
Make a few more similar sashes.

We connect the individual sashes with the help of loops.

To complicate the task, the frame can be woven from a vine, made of openwork metal (forging), decorate the corners of the frame forged metal, apply the technique of craquelure on wood.

Screen decoration

According to the method of decorating, the structures are divided into deaf and transparent. Based on this, the material for filling the frame is selected. If the final product is planned to be transparent or translucent, glass is chosen. It can be corrugated, matte, mosaic, painted, etc.

For glass, notches are made in wooden bars, then it is fixed with glazing beads.

Another material applicable for a translucent screen is sisoflor. But it is difficult to work with him, he is quite fragile.Sometimes, when creating a multifaceted decor, transparent sections of the screen are combined with non-transparent ones. For the latter, cardboard is used.

Cardboard is combined with a floral grid, paper, foil.

The most used material is fabric. And here the scope of design imagination is simply limitless: chintz, fine silk, embroidery, organza, tapestry, painting on fabric and so on.

There are practically no restrictions in decor.

There are also a lot of types of fastening fabric on a block frame:

WITH using a construction stapler;
H pull on rack slats;
WITH using decorative loops;
"Plant" on glue with a rubber base;
WITH using specialized pins.

Over time, when making a screen with their own hands, each master has his own secrets, methods of fastening and decorating.

VIDEO: A screen is a stylish way of zoning space.

Screen in the interior - 50 photo ideas:

A screen is a very elegant and light partition. Usually it consists of three wings, which are folded like an accordion. With its help, you can divide the room into zones and thus add variety to a small apartment. A do-it-yourself designed screen will make the room original and mysterious, because it will always be interesting, but what is there? At the same time, there are plenty of techniques for creating such a miracle in the interior. It can be weaving, decoupage and craquelure wooden surfaces, the screen can also be woven or plastic.

DIY screen: materials

To make a screen with your own hands from wood and fabric, you need to prepare the necessary tools and materials.

Of the tools you will need:

electric drill;
screwdriver;
hacksaw;
construction stapler;
screws;
door hinges;
varnish or paint;
glue for various kinds material.

Materials for making a screen with your own hands from wood:

wooden bars;
textile;
various tapes.

When everything you need is collected, you can start making a screen with your own hands. The manufacturing process is divided into two stages: the manufacture of the frame and its decoration.

Frame manufacturingfor a screen

The frame can be made in the form of a frame or a solid panel. In the manufacture of a solid frame for a screen, it should be borne in mind that the material must be chosen light. Otherwise, the screen will be too heavy, which is extremely inconvenient to use. Do-it-yourself screen, made in the form of a frame, more convenient to use. Such a screen will give more opportunities for the realization of fantastic ideas in its manufacture.

Make a frame for a screen of wood. Making a regular frame on your own does not amount to great work. First of all, we calculate the dimensions for the future screen. We cut wooden blocks according to the sizes. To connect the prepared parts, you can use the connection in the form of spikes. This connection is very similar to a zipper for clothes. Along the edges of the bars on one side, grooves are cut in the form of a recess. On the other hand, we make cloves. Everything must be done so that the two bars are connected tightly to each other. First, we coat the junction with glue. After that, we insert the teeth of the other into the grooves of one bar. This connection is very strong.

The second frame mounting option is simpler. To do this, you need to connect the edges of the bars with screws. When making a frame for a screen, you can connect wooden beam so that the legs are obtained.

In the manufacture of screens with their own hands often use wooden frame. It should be borne in mind that the tree requires pre-treatment. A prerequisite is the impregnation, priming and painting of wood. Impregnation will not give wooden products swell from high humidity or water ingress. The primer allows the paint to adhere remarkably.

We process the frame with everything necessary and paint it with the color that will be in harmony with the furniture and textiles in the room. The screen is varnished in several layers. In this way we make two or three wooden frames for the screen. If desired, the wooden frame can be varnished or stained. An interesting option- combine contrasting acrylic paints and make a screen to match the interior.

Of course, you can use to make a frame for a screen various materials. For example, bamboo, metal rods, mesh or other material. The main thing is that the screen made with your own hands fits well into the interior of the room.

Decorating a screen with your own hands

The frame screen can be decorated in several ways. It is important to decide whether it will be a blank screen, transparent or mixed. Depending on the type of screen chosen, the material for decoration is also selected.

Mixed screens look beautiful in the interior. Their surface consists of various sections, transparent, translucent and solid. Such screens carry an ambiguous connotation. On the one hand, they hide from prying eyes, and on the other hand, they make it possible to peep behind the screen. To do this, use a variety of decoration techniques. It can be cut out silhouettes or regular cuts. With such openwork, a hand-made screen creates the impression that you can see everything that happens behind it.

A do-it-yourself screen decorated with fabric creates warmth and comfort in the room. It is perfect for a child's room. Using fabrics of various colors, you can create an unusually bright and beautiful screen with your own hands.

We cut out the fabric for the screen with our own hands. In this case, it must be borne in mind that we will bend it. Therefore, we add 5-6 centimeters on each side.

Before attaching the fabric to the frame, you need to create the necessary picture. For example, make an original applique or sew bows of ribbons of different colors onto the fabric. You can use beads, buttons and any other decoration accessories. It will look beautiful if artificial flowers are placed on a woven surface, exactly the same as those that are in a vase on the floor. You get a single ensemble that will enliven the most boring interior.

It is better to start fastening from above, using a construction stapler. The fabric should lie flat, otherwise you will get ugly waves. When the top is fixed, proceed to attach the bottom. In this case, it is necessary to stretch the fabric well. Only when the top and bottom of the fabric is securely fastened to the frame, we fasten the fabric on the sides.

The last step in making a screen with your own hands is connecting the decorated frames with the help of door hinges. We use two loops for each connection. This will allow you to fold the screen in the event that guests are on the threshold.

An interesting option in the design of the bedroom is a screen on which framed photographs are placed. It can beautifully delimit one zone from another, and will serve as a small photo album.

A do-it-yourself screen, made with love and imagination, will bring fresh breath and novelty to the interior of your home.