Do-it-yourself greenhouse bed with a convertible top. How and from what to build a simple greenhouse in the country. The most convenient do-it-yourself greenhouse: video instructions for making

1. Greenhouse house

From window frames you can build charming houses that will help not only provide plants with comfort, but also become a stunning decoration for your summer cottage.

2. Dome

A large polygonal greenhouse, the frame of which is built of wood covered with ordinary oilcloth. Despite the complexity of manufacturing, such a domed design has an attractive appearance, stability and excellent illumination.

3. Plastic cap

A mini greenhouse that can be made from an ordinary plastic bottle by simply cutting off the bottom from it. Such a greenhouse is best suited for cucumbers and zucchini, as these plants do not tolerate transplantation well and spend a lot of effort on adaptation. At the beginning of the landing, the cap should be covered with a lid; later, when the daytime temperature reaches twenty degrees, the lid should be removed, and later the bottle should be removed altogether.

4. Caskets

From four boards and a window frame, you can make an original small greenhouse for flowers and plants. First, the lid from the window frame should be kept closed, and when the plants grow and get stronger, fold it back.

5. Foldable design

A convenient, practical folding greenhouse that can be made from PVC pipes of small diameter and ordinary polyethylene.

6. Umbrella

A small greenhouse made from wooden barrel and an old oilcloth umbrella or a conventional umbrella frame covered with polyethylene.

7. Cozy tent

A greenhouse-tent, which can be built from a children's tent, equipping its walls with oilcloth or polyethylene inserts, or buy a ready-made film greenhouse tent. The advantages of this design are its compactness and mobility.

8. Plastic house

From plastic bottles it can turn out to be a wonderful greenhouse open or closed type. The creation of such a greenhouse does not require large expenses and special skills, and you yourself determine the size and design of the structure.

9. Lifting cover

The original greenhouse with a lifting lid, made from wooden planks, thin PVC pipes, polyethylene and metal chains. This design is quite simple to build and very convenient to use.

10. Flowerbed

small greenhouse, which will require a wooden frame of the desired size, two thin plastic pipes and a piece of oilcloth to create. The beauty of this design is that when the plants get stronger and the night temperature rises, the oilcloth can be easily removed and thereby turn the greenhouse into a neat flower bed.

11. Mini house

An adorable greenhouse made from plastic CD boxes is perfect for growing indoor plants and will be a magnificent decoration of the balcony.

12. Pallets

A small greenhouse can be easily built from old pallets and plastic wrap. Such a greenhouse is great for growing seedlings or indoor flowers.

13. Container

An ordinary plastic container will make an excellent greenhouse, which is suitable for growing seedlings on the balcony.

14. Reliable boxing

Large greenhouse made of wood and polycarbonate.

A large and reliable polycarbonate greenhouse attached to a wooden frame, which, despite the difficulties of construction and some investments, is perfect for growing any crop and will last for many years.

In continuation of the topic to the attention of readers for proper disposal.

It is no secret that for any summer resident it is a matter of pride, and sometimes even self-affirmation. Real masters of dacha business build winter oases with many flowers and plants. Many of them are created according to individual sketches.. Stock up on patience and pencils to draw for yourself a drawing of the greenhouse you like. We will tell you what you can build to the envy of your neighbors, what materials are best suited for these purposes, how you can use PVC and other seemingly unnecessary elements to build the best warm house for flowers and vegetables.

Read in the article

Types of greenhouses and greenhouses with photos of DIY projects

The most popular greenhouse configurations are arched or gable. When choosing one or another configuration, the specificity of the plants that you plan to grow there plays an important role. Arched structures are more suitable for undersized plants: peppers, tomatoes, eggplants. But gable, on the contrary, grapes and so on.

For flowers, you can choose a design more interesting. Their advantage is that plants can be hung on flowerpots, then the shape and configuration of the greenhouse can be absolutely anything.

The first and most important thing, how a greenhouse differs from a greenhouse, is the lack of heating in the winter. The greenhouse structure is purely seasonal. However, in the southern regions, where all year round plus temperature, greenhouses are constantly used.

If the weather permits, and there is a craving for design, you can create such a greenhouse for flowers and small plants of a non-standard design. You can use improvised materials, plastic pipes and bottles, everything that is idle.

There are also ready-made samples that can be bought at any large gardening supermarket.

Overview of the best projects for building mini-greenhouses with your own hands

An interesting solution for gardeners is offered by Eco-Plast. The mini-greenhouses of this company are equipped with a system forced ventilation. They are very good to place on. Greenhouses under the Sun Tunnel brand will ensure maximum seed germination with the first rays of the spring sun

A similar idea with pallets can be repeated independently. It is enough to provide the plants with a decent one, organize compartments for planting seeds, create traction with the help of an ordinary penny fan.

For your information! In such a ventilated compartment, on the one hand, but sufficiently heated, on the other hand, plants not only become active and begin to grow, but are also maximally protected from pests due to the tight fit of the protective cover to the tray.

Very often, an economy mini-greenhouse is installed near the walls. Firstly, it saves material consumption, and secondly, it simplifies the procedure and.

Advantages of winter greenhouses:

Foundation. The advantage of winter greenhouses is its capital foundation. Most often with the possibility of heating. More durable and massive materials are usually used, which in itself makes the structure more stable and durable.
Space. Winter greenhouses, most often they are installed not just like that, but for the purpose of making a profit. That is why, in order to recoup the costs of heating and maintenance, for the most part, farmers do not save on the area.

Division into zones. Possibility of individual selection of planting sites depending on frost resistance. Some cultures require more heat, respectively, and heating, and some less.

Overview of the best projects for a do-it-yourself greenhouse heating device

Heating options are very different. However, if you want to really harvest, then simply heating the air will not be enough.

Advice! The main condition for a high yield in winter is to provide plants with warm soil.

Heating options:

Where are greenhouses and greenhouses installed?

Choice right place for a greenhouse - almost 50% success. Before you start planning the site, decide for yourself:

Will the greenhouse be seasonal or not;
Is there enough light in your area;
At what level are ground water. Too close location will negate all your efforts. The root system of plants will simply die from the abundance of moisture.
Is there wind in the area;

Advice! The site must be leveled if the soil is loose, the greenhouse can “slip” or sink. It is better to compact the soil.

What materials are used to make a greenhouse or greenhouse with your own hands

What to look for when choosing a material for a greenhouse or greenhouse:

good light transmission;
resistance to deformation, for example, to winds;
ease of installation and assembly;
durability.

What materials is the frame made of?

Modern building technology allow you to use different materials for arranging the frame: from traditional wood to modern polypropylene. However, if you still decide to use wood, remember that this is a rather difficult material in terms of maintenance. Over time, it can dry out, rot, sag.

Advice! When installing a greenhouse with a wooden frame, it must be installed on concrete base to prevent contact with the ground.

How to build a stationary wooden greenhouse from a bar with your own hands

How to independently build a polycarbonate greenhouse on a wooden base with your own hands we will tell in a simple step-by-step instruction.

Illustration	Action Description
	We make markings for the width of the shelter. We start assembling the frame from the corners, using reinforcing elements.
	We fix the corners on.
	In addition to the base. We begin assembling the frame for the base of the roof. Here we also use corners.
	We reinforce the frame with transverse guides.
	We start assembling the doors. We use the usual corners, hinges and fittings.
	For a gable greenhouse, the process of covering with profiled sheets, as a rule, begins from the roof. To do this, pre-mark polypropylene.
	We do the same with the sidewalls. The main thing is to reduce the number of "cold bridges", lay the layers a little overlap.

How to make a collapsible seasonal wooden greenhouse with your own hands

This is a relatively small structure, which is very simple to build.

Purpose

Like a greenhouse, a greenhouse is used to create a favorable microclimate in the preparation of seedlings or in the full cultivation of tomatoes, cucumbers, cabbage and other plants.

In a broad sense, both structures are perceived as one and the same, although in fact a greenhouse is a small and unheated structure. A greenhouse is a larger building with a heating and ventilation system that allows you to grow many crops at any time of the year.

Design

In terms of their structure, greenhouses are quite simple. A frame is assembled from pipes, metal or wood, which is covered with film, polycarbonate, glass, acrylic and other light-penetrating materials. If the weight of the structure is very large, it is additionally installed on the foundation.

For ventilation, removable panels or opening transoms are provided. Heating is carried out using water heating with radiators, infrared heaters or hot air from heat sources outside the greenhouse.

Installation

Because the sunlight vital for plants, it is necessary to build a greenhouse on the south side. It is advisable to place it on a slope and closer to other buildings in order to protect it from the wind and have access to engineering communications. It is better to stay away from high fences and trees: they give a shadow, and falling leaves reduce light transmission.

youtube.com

Assembly difficulty: low.
Foundation: not required.
Price: low.
Variations: the frame can be replaced with plastic pipes, and the covering material with a film.

The simplest design option, which is ideal for a small greenhouse. A frame made of reinforcement is installed directly on the bed, and agrofiber or, as it is also called, spunbond, is stretched over it. Such material protects from the sun, while retaining heat and moisture.

1. The dimensions of such a greenhouse are chosen arbitrarily, depending on the footage of the available materials. For example, it is convenient to cut a six-meter rebar in half. With such a length of arcs, the width of the greenhouse is about 80 cm. The arcs themselves should be installed in increments of 1.2–1.5 m.

teplica-exp.ru

2. Arcs are bent from reinforcement with a diameter of 8 mm. Next, tubes are put on them drip irrigation or an old hose, leaving 10–20 cm at each end, so that it is convenient to insert the structure into the ground.

ebayimg.com

3. After marking the installation sites for the arcs, cut steel pipes or drilled wooden pegs 20–30 cm long are driven into the ground, and reinforcement is already inserted into them.

stopdacha.ru

4. Spunbond can be stitched on sewing machine, forming folds-pockets that are worn directly on the arcs. Another option is to install rails on the sides of the beds from plastic pipe and attach agrofibre to them using purchased clips or cut pieces of pipes. As a result, the covering material can be easily lifted by simply removing them.

stblizko.ru

5. If desired, you can fasten the arcs not to pipes hammered into the ground, but to metal guides rigidly fixed along the edges of the base. This design will allow you to fold the greenhouse like an accordion, simply by shifting the arcs.

must.kz

6. The free ends of the spunbond at the ends must be collected, tied in a knot and secured with a peg, earth or in another way.

samara.kinplast.ru

Here are step by step video instructions.

dachadecor.com

Assembly difficulty: low.
Foundation: not required.
Price: low.
Variations: instead of a film, agrofiber can be used, and the door can be made on a wooden frame.

A budget version of a greenhouse made of masonry mesh and ordinary film, which is quickly assembled and has a number of advantages. The design does not require a foundation, due to its elasticity it is resistant to wind loads, and is also convenient for tying plants from the inside. At the same time, by folding the grid, you can get different sizes depending on your needs.

As load-bearing posts, a wooden bar, steel corners, pipes or a channel are used. They are slaughtered at a distance of 1.2–1.4 m.
The arch of the greenhouse is formed from two pieces of mesh overlapped. From below, it is attached with a wire to the posts, and from above it is fastened together with the same wire or plastic ties.
To strengthen the structure in the middle of the passage, T-shaped supports made of wooden beam 50 × 50 mm. If desired, they can also be hammered into the ground.
A film is put on a dome assembled from a mesh, which is held by strings of twine or rope stretched over it.
The side walls are also made of a film that is tucked up and attached to the dome with adhesive tape. In several places, small windows are cut at the top and bottom for ventilation of the greenhouse.
The door is made on a wooden frame or made of the same film, which is cut and attached to the side wall with magnets in the manner of door mosquito nets.

stroydachusam.ru

Assembly difficulty: average.
Foundation: not required.
Price: low.

Another way to build a greenhouse in haste. A wooden beam is used as a frame, and packaging stretch film serves as a covering material. At in large numbers layers, it transmits light a little worse than ordinary PVC film, but on hot days this is even a plus.

The film is sold in rolls, so the dimensions of the greenhouse are selected according to the cutting of the timber and taking into account your wishes.
For the base, steel corners 40 × 40 mm are used, in which holes for attaching the frame racks are pre-drilled. They can also be treated with bitumen or painted to extend their service life.
The corners are hammered into the ground, and pieces of timber are screwed to them with self-tapping screws. In turn, the lower frame is attached to the beam, on which side walls and roof. All corners are reinforced with additional inclined pieces of timber.
The door is assembled on a wooden frame in one of the side walls and mounted on hinges.
Film wrapping is carried out in parts, moreover, in several layers and overlapping. First, the gables are installed, then the roof slopes, and only then the walls. You need to start wrapping them from the bottom so that the flowing rainwater did not enter the greenhouse.
After winding with a glazing bead or a river, the door and its outer contour of the door are upholstered, and then the film around the frame is cut through. In the same way, you can make a window in the opposite wall.

teplica-piter.ru

Assembly difficulty: average.
Foundation: desirable.
Price: minimum.
Variations: you can combine frames with foil to make a roof, side walls or doors out of it.

The main advantage of this design is its low cost. Old window frames can be found, if not for free, then for a symbolic price. In addition, glass transmits light much better than film and polycarbonate. The windows already have vents for ventilation, and if you pick up a balcony block, there will also be a finished door.

The dimensions of the greenhouse depend on the size of the frames and the internal area you need. Aim for a width of about 2.5 m to get a passage of about 60 cm and two beds of 80-90 cm.
Windows together with glass have considerable weight, so it is advisable to install them on solid foundation. It may be shallow strip foundation, massive wooden beam or metal profile.
Installed on the foundation wooden frame or pillars in the corners, and already frames are attached to them and to each other. The gaps between each block are covered with putty and clogged with laminate substrate strips or a thin wooden lath.
A door is made in the front wall. Its role can be played by one of the windows, balcony door or a wooden frame covered with foil. Ventilation is carried out through the windows.
To reduce the weight of the roof, it is better to make a wooden beam and film. You can use all the same window frames, but in this case you will have to reinforce the structure with supports in the middle of the passage so that it can withstand a lot of weight.

maja-dacha.ru

Assembly difficulty: average.
Foundation: not required.
Price: low.
Variations: the film can be replaced with agrofibre or polycarbonate

A greenhouse made of polypropylene pipes attracts with its simplicity, reliability and low price. Materials are sold in any hardware store and assembly does not require any special skills or tools. You can even do without a soldering iron if you connect the pipes not with fittings, but with through bolts.

As usual, sizes are selected based on needs and available materials. Polypropylene pipe is usually sold in 4m lengths and is easily cut and spliced with couplers.
The first step is to calculate the length of the pipe and the number of fittings needed. It is better to take with a margin, so that later you do not have to run the store.
The main parts are soldered from the pipe, tees and crosses - arches with crossbars and longitudinal inserts.
Next, a greenhouse is assembled from the prepared parts. If a soldering iron is not at hand, you can use bolts with nuts and washers to connect, which are inserted into the pipes drilled through.
The film is fixed on the ribs of the frame with the help of purchased clamps for pipes or home-made clips from pipes cut along sections of a slightly larger diameter.

legkovmeste.ru

Assembly difficulty: average.
Foundation: not required.
Price: low.
Variations: the film can be replaced with agrofibre or polycarbonate.

The classic version of the greenhouse, used for decades and not losing its popularity. The wooden beam is easily processed, has a small weight and sufficient strength, and also retains heat well. The design does not need a major foundation - you can get by with a frame made of a larger beam or use steel corners as a base.

The standard cutting of a beam is 6 m, so they are repelled from this figure. Most often, greenhouses are made 3 × 6 m, but if desired, the dimensions can be both reduced and increased. Finished project with material calculations available at this link.
The assembly of the frame is the same as that of the stretch film greenhouse. Steel corners are hammered into the ground at intervals of about 1 m at the points where the racks are attached. In each of them, two holes are drilled for self-tapping screws or one for M8 or M10 bolts.
At the corners around the perimeter are fixed vertical racks, which are tied with an upper contour of a bar. To stiffen the corners, one jib is added on each side.
Opposite the racks, triangular roof trusses are installed and fixed. The slope angle is selected depending on snow load. So, if there is a lot of snow in your area, the angle of inclination should be more (the roof is higher and sharper).
The door and window for ventilation go astray wooden frame and is installed in the front and back wall respectively.
At the end, the frame is covered with a film, which is attached to the timber with the help of a rail stuffed over it. All sharp parts on wood are rounded off or covered soft material so that the film does not tear during operation.

Assembly difficulty: high.
Foundation: necessary.
Price: high.
Variations: the foundation can be made of a wooden beam or steel reinforcement, a corner or pipes hammered into the ground can be used.

most popular and modern version greenhouses. Such designs are much more expensive than others, difficult to manufacture, but will serve for decades. Polycarbonate withstands under the open sun for 10-12 years, and the frame made of profile steel pipe practically eternal.

1. Standard size polycarbonate - 2,100 × 6,000 mm, so it is convenient to cut it into four or two parts with a size of 2.1 × 1.5 m or 2.1 × 3 m, respectively. Such pieces will be optimal for a greenhouse measuring 3 × 6 meters.

2. For reliable fastening and distribution of wind loads, a foundation is made under the greenhouse. This can be a strip shallow foundation, a frame made of an antiseptic-treated wooden beam, or steel corners hammered into the ground.

YouTube channel Evgeny Kolomakin

3. The structure of the greenhouse consists of an arch, which is formed with the help of arcs from a profiled steel pipe 20 × 20 mm, located at a distance of one meter from each other.

4. The arcs are fastened together by longitudinal sections from the same pipe, which are connected by welding.

5. A door is arranged at the front end: a frame measuring 1.85 × 1 m is welded from the pipe, which is attached to the frame on hinges. A ventilation window measuring 1 × 1 m is made according to the same principle and is located in the rear end.

6. Covering with polycarbonate starts from the ends. The sheet is cut in half, attached to the profile with special self-tapping screws with thermal washers, and then cut along the arc contour with a sharp knife. After that, sheets of side walls are installed.

techkomplekt.ru

Assembly difficulty: average.
Foundation: not required.
Price: low.

More simple and affordable option polycarbonate greenhouses. It does not use an expensive metal pipe that needs to be welded. And as a frame material, galvanized profiles for drywall systems are used. They are easily cut with scissors for metal and fastened with ordinary self-tapping screws.

When choosing sizes, as usual, we start from the parameters of polycarbonate sheets. Since the profiles lose their rigidity when bent, it is better to stay not on an arched, but on a gable greenhouse.
By analogy with arcs from metal pipe a frame made of galvanized profile is assembled from ribs in the form of a house.
The assembled modules are mounted on a frame made of wooden beams and tied together with sections of profiles. Doors and a window for ventilation are made in the front and back walls.
At the end, the frame is sheathed with polycarbonate sheets, which are attached with special self-tapping screws with plastic thermowells.

juliana.ru

Assembly difficulty: high.
Foundation: necessary.
Price: high.
Variations: to facilitate the design, you can make the top of polycarbonate or film.

The most correct, but rather time-consuming and expensive version of the greenhouse. The main trump card of glass is excellent light transmission and durability. However, due to the heavy weight of the structure, a strong metal frame and foundation are required. In addition to arranging the strip foundation, the difficulty also lies in the need to use welding.

In the matter of choosing sizes, a glass greenhouse is no exception - everything is strictly individual and taking into account the materials available.
The impressive weight of the glass and metal frame requires a full foundation. Usually, a trench 30 cm deep and 20 cm wide is dug around the perimeter, a wooden formwork 20 cm high is installed on top and all this is poured with concrete. Also, before pouring, anchor bolts are inserted into the formwork to secure the frame.
Attached to the resulting base with anchors metal channel or corner. Then racks 1.6–1.8 m high are welded to this frame from two folded corners 45 × 45 mm. On top they are fastened with longitudinal segments of the corner.
Next, rafters from the same double corners are placed on the resulting box. At the bottom, they are welded to the uprights, and from above, to another corner that acts as a ridge beam.
A door is inserted into one of the walls, and a window for ventilation is arranged in the lid or wall.
Glasses are installed in the frames obtained due to the use of double corners and fixed with self-made hallmarks - plates bent in the form of the letter Z made of thin aluminum or steel. With one hook, the gluer is attached to the corner, and with the second - to the glass.

pinterest.com

Assembly difficulty: high.
Foundation: desirable.
Price: high.
Variations: the film can be replaced with polycarbonate or glass, and the frame can be made of a profile or pipes.

A domed or geodesic greenhouse attracts primarily with its unusual appearance: it entirely consists of many triangles and hexagons. Other advantages include high structural strength and the best light transmission. The disadvantage of the geodesic dome is one - the complexity of manufacturing.

The dimensions of such a greenhouse are selected individually, based on the required area. Since the frame structure is quite complex, the calculations are the most time-consuming part of the project.
In order not to get confused and take into account all the nuances, it is convenient to carry out the calculation using a special calculator. In it, you can set the dimensions, select the "density" of the frame and get a list of all necessary details for assembly with dimensions, as well as their approximate cost.
Regardless of the dimensions, the domed greenhouse is highly durable and is not afraid of the winds, so it is not necessary to make a foundation for it. However, since the construction of a structure is very labor-intensive, it is rational to extend its service life and equip a light strip foundation for attaching the frame.
The edges of the structure consist of triangles, which, in turn, are assembled from wooden lath by template. First you need to prepare required amount such triangles.
The greenhouse is being assembled as a magnetic constructor from childhood. Starting from the bottom, rows of triangles are assembled one after another, which are fastened together with self-tapping screws and form a dome. If everything is calculated correctly, it will close on top and will be perfectly correct in shape.
One of the triangles in the roof is made folding or removable to provide ventilation. The door is either installed in the shape of a polygon, or made in a traditional shape with a mortise box.
The film covers the finished dome or is stretched over each triangle at the assembly stage. In the first case, it will be easier to replace the film when it breaks. The second one gives a more aesthetic look. Which one to choose - decide for yourself.

The protective layer on which the inscriptions are applied must be located on the outside of the greenhouse.
To get the maximum solid construction be sure (!) pay attention to the location of the "honeycombs" of polycarbonate - they should only go vertically, in inclined structures - parallel to the slope.
When creating arches, keep in mind that polycarbonate sheets bend only in one direction - in length, that is, along the line of stiffeners.
The joints of the sheets should fall on the center of the frame rack, connect the sheets only in this way.
They cut this type of plastic with a construction knife, electric jigsaw, grinder. You can also use a hacksaw or a circular saw.
For a strong connection of sheets to each other, special plastic profiles. Manufacturers do not recommend overlapping polycarbonate. In practice, when making a polycarbonate greenhouse with your own hands, it is not always possible to cut and fit sheets perfectly. Some craftsmen generally manage to do without connecting profiles, placing overlapping polycarbonate. The most important thing is that the junction must necessarily fall on the center of the rack, and not sag in the air. Moreover, even with perfect installation under the pressure of snow, the sheet can be squeezed out of the profile. In the case of overlap, this does not happen.
It is undesirable to use a powerful drill for screwing in self-tapping screws - it will overtighten fasteners and often slip off during operation. It is better to work with a conventional screwdriver. Polycarbonate is drilled at low speed with little effort. Next, turn off the tool, insert the screws and continue to work.
The distance between the screwed screws is 25-70 cm. It all depends on the type of frame and the expected snow and wind load.
When assembling polycarbonate structures, riveting is sometimes used instead of self-tapping screws. However, it will be more difficult to dismantle the greenhouse or replace the damaged sheet in this case.
When the temperature changes, the plastic is able to change dimensions. When butt-joining between sheets, a small space of a couple of millimeters in size is necessarily left - technological gap. Otherwise, cracks will form at the junction. For the same reason, the size of the holes for the fasteners is made a little larger. To prevent the plastic from cracking, do not twist them all the way.
To compensate for expansion and protection from cold bridges, it is recommended to use special thermal washers for polycarbonate (self-tapping screws are purchased separately). It is allowed to use EPDM roofing screws equipped with a gasket or standard for metal with a rubber thermal washer, in which the thread has a small pitch.

There must be no person who would not want to save on achieving a result. That is why lovers of gardening and gardening skillfully invest their resources in equipment, whether it is made with their own hands or bought in a specialized store. Such equipment is often a greenhouse or greenhouse. How to build structures that will help out in an unfavorable climate?

Do-it-yourself greenhouse and greenhouse, photo

The topic of this article is greenhouse and greenhouse with their own hands. Photos and expert advice will help you build on your suburban area design for growing vegetables, herbs and berries.

How to make a greenhouse with your own hands?

Unlike greenhouses, the main structure of the greenhouse are arcs. It is because of them that the frame can have a different shape: arched, triangular and in the shape of a house. The material for pipes of future arcs is different kind fittings - metal and fiberglass. Also use polypropylene pipes. If they are made from window frames, then glass is usually used as a coating.

Most likely, each summer resident will choose an arc-shaped greenhouse, it is best exploited. The simplest greenhouse can be represented by bent polypropylene pipes stretched with a simple polyethylene film. You can fix the film with ordinary bricks. The optimal distance between the arcs will be half a meter. The base can be made of wood or even absent. For greater rigidity, it is necessary to fasten all the arcs with a horizontal beam.

If a greenhouse is needed for growing seedlings or greenery, then you should pay attention to wooden structure. By itself, the greenhouse is not high and triangular in shape. Its advantage is excellent strength and stability.

Greenhouse - where to start?

If your greenhouse already lacks space for growing plants, then you should consider building a greenhouse. If the construction of a "greenhouse" structure was not a particular problem, then to create a "greenhouse" one will need to make an effort to obtain a lasting, sustainable result. What is the algorithm of actions for building a greenhouse with your own hands?

The easiest greenhouse to manufacture is arched. Among its advantages:

Penetration sun rays , which means - good growth plants and a bountiful harvest.
Minimum materials of manufacture. The main raw materials for the construction of a greenhouse are pvc pipes, timber for the base and for the door frame, brackets for fasteners, thick plastic film.
Small size. For the construction of the structure does not require a large area.

Where does the construction of a greenhouse or greenhouse begin?

Stage 1. First you need to select and prepare the site where the greenhouse will stand. It is advisable to tamp it down.

Stage 2. After that comes the base, consisting of boards knocked down along the perimeter and disinfected with an antiseptic. In each of the corners of the downed structure, reinforcement must be inserted (into the ground). From the same reinforcement, it is now necessary to furnish around the perimeter of the base at a distance of no more than 50 cm. It is necessary to dig the reinforcement into the ground by half or less. The length of the reinforcement is not less than a meter.

Stage 3. The cut PVC pipes must be inserted onto the fittings at the same opposite ends of the pipe. fix pipes metal hinges using a screwdriver.

Stage 4. The next step is to collect door structure which will also reinforce the work already done. You will need a beam of this size: one 130 cm, two 170 cm each, two 60 cm each and two 140 cm each. doorway. Further, at a height of 140 cm, 60 cm bars are driven in. To the latter, from below, the remaining beams are nailed.

The result should be a design with one main frame and two on the sides. I must say that the dimensions are taken on the basis that the parameters of the greenhouse will be 3 by 6 meters. The finished frame should be strengthened by connecting with wooden foundation, bars. The last step is to cover the structure with a dense polyethylene film, which can be fixed with an ordinary long bar or with a bracket.
So, we hope that our topic is a greenhouse and a greenhouse with our own hands, photo– will help you build high-quality on your territory, robust design which will allow you to grow a rich harvest.