How nice it is to relax after a hard day at work by the cool, soothing murmur of water fountain made by with my own hands. Even small decorative fountain on a summer cottage will not only become a bright decoration of the landscape, but also a favorite place for relaxation, where you can enjoy unity with nature. It won’t be difficult to give yourself this incomparable pleasure if you realize the idea yourself, knowing how to make a fountain in your dacha with your own hands.
Choosing a suitable location
Garden fountains – the best way solving the issue of air humidification during the hot summer months. Regardless of the style in which the hydraulic installation will be made, be it classic, rustic, oriental, avant-garde, it will be a bright touch in the landscape design. The mesmerizing play of water streams, playing in the sun's rays with all the colors of the rainbow, will not leave anyone indifferent.
The key to successfully choosing a place for a fountain is proportionality with the appearance of the site and the overall harmony of the garden.
When choosing a location, it is important to consider the possibility of connecting to a power supply for uninterrupted operation of the pump.
When deciding on the location of the fountain, you should take into account the presence and degree of slope of the ground. It is better if the installation is located in a lowland, which will increase the saturation of the air with moisture, as well as adjust the volume of groundwater.
It is not advisable to place fountains:
- too much open places area, since direct sunlight will provoke “blooming” of water;
- near trees, since powerful roots can deform the fountain bowl and damage the waterproofing, and leaves from trees, fruits, seeds and fluff entering the reservoir can cause malfunctions;
- in the immediate vicinity of the house so that wind currents do not bring moisture to the walls of the building.
The best place is a site that is clearly visible from the house and various parts of the garden.
Preparing a suitable container
When deciding to create a fountain with your own hands in the garden, it is important to wisely choose or make your own container for a hydraulic installation.
As a fountain bowl, you can use ready-made plastic containers of various shapes, which allow you to ensure reliable waterproofing
To create larger fountains, it is necessary to dig a pit, at the bottom of which a foundation for the future structure will be installed. The bottom of the dug pit for the fountain is covered with a layer of sand, the side walls are reinforced with bricks. After that inner surface The tank can be covered with plastic film, which does not allow water to pass through. Sealing of surface seams can be achieved by treating them with frost-resistant silicone.
Important point: The depth of the foundation must be below the soil level. This placement will eliminate the possibility of soil being washed away around the fountain bowl.
An emergency drain can be provided not far from the edge of the surface, the presence of which will prevent the water from rising above the required level.
Craftsmen, when creating a fountain with their own hands at the dacha, use any waste materials: natural stones, river pebbles, car tires, glass products, ceramic parts
The main requirement for the material is high strength characteristics and the ability to withstand temperature changes.
The finished bowl can be filled with water.
Pumping system installation
It is impossible to put a garden fountain into operation without connecting its “heart” - powerful pump, ensuring continuous movement of a powerful flow. The success of the long-lasting operation of the fountain directly depends on the correctness. General principle The operation of the system is quite simple: the water thrown out through the nozzle is collected in a bowl. From the bowl it flows into the drain hole, from where it enters the pipeline and, as it moves, it first undergoes coarse and later finer cleaning. A pump from the pipeline forces already purified water to the nozzle.
When thinking about the question of how to make a fountain in a country house, you should definitely consider installing a drainage system. The pipeline for the system can be equipped with plastic pipes with a diameter of about 16mm. Plastic has excellent performance characteristics and for a long time services. The plastic structure is easily connected using a special soldering iron.
Decorative fountains for the garden are mainly equipped with circulation pumps, in which water is taken from the bowl, passing through a circle, and discharged back into the fountain
The power of the pump directly depends on the capacity of the fountain bowl, as well as the expected power of the jet, which will be knocked out of the water like a bright fireworks display.
The fountain's water circulation system can be supplemented by installing a receiver - a pressure tank. Installing a receiver allows you to ensure constant pressure for water to enter the nozzle and stable operation of the system as a whole. With this configuration, water is pumped into the receiver by a pump, and then transferred to a nozzle located a level below.
The action of cascading fountains is based on the same principle.
The water in the cascade smoothly flows down a small waterfall along several steps located at different levels
After installation, the pump should be checked for functionality and only then decorated. decorative elements.
Optional equipment
Installing additional equipment for the fountain will transform and diversify the design.
Special nozzles make it possible to give the jets of ejected water the most unusual shapes: geysers, tulips, domes, umbrellas, hemispheres
The combination of nozzles and the effect of the shapes they form allows you to create fancy water pictures.
Additional lighting amazingly transforms a garden fountain, giving it a magical effect. Since light sources often come into contact with water and are located directly in the body of the fountain, increased requirements should be placed on their selection: contacts protected from water, hermetically sealed.
Decorative lighting, disguised in the bottom of the reservoir, will delight the eye in the coming twilight with the effect of glowing water
Underwater ones are very popular for decorating fountains. lighting, as well as all kinds of floating lamps.
An interesting decorative option is a small water mill. Making instructions:
Will help extend the service life of a hydraulic installation proper care behind the fountain: it is advisable to dismantle removable structural elements for the winter period. With the onset of cold weather, the tank itself should be emptied of water and securely covered with a film that protects from dust, dirt and precipitation.
How nice it is to summer heat sit near the water, feel the cool splashes and just enjoy the view of cheerfully murmuring streams. A fountain installed in the yard will be a wonderful decoration summer cottage, and if it is made with your own hands, it becomes the real pride of the family and the envy of the neighbors.
Unfortunately, there is a myth that building a fountain is a labor-intensive and expensive process. In this article we will try to look step by step at how to make a fountain with your own hands.
Types of fountains
Depending on the location of the pumping equipment, there are two types of fountains, submersible and stationary.
Submersible type - resembles a geyser that is pushed out from the depths of the water. Pumping system in this case, it is installed at the bottom of the bowl, it is complemented by a pipeline and special sprinklers that control the shape of the flow.
Stationary type - has the shape of a statue or object. Such fountains can often be found in parks and squares.
Stages of preparation for the construction of a fountain
Planning
At this stage, you need to decide on the type of fountain, its size, types of water supply and methods of drainage. Calculate dimensions future construction, it is important to remember that the fountain must fit ergonomically into the entire arrangement of the yard and into the design of garden plantings.
Detailed instructions on how to make a fountain with your own hands will help you avoid problems with construction, and therefore guarantee pleasant and long-term operation.
Choosing an installation location
An important rule: do not plan to install the fountain in open, bright sun. This can lead to constant blooming of water in the bowl, which means unpleasant appearance and the smell of mud.
The fountain should not interfere with free movement around the site. It is also not recommended to install a bowl near trees; firstly, this threatens to damage the roots of the tree, and they, in turn, can compromise the integrity of the water container. Secondly, fallen leaves will contribute to the contamination of the fountain.
Construction materials
In order to make the construction of your fountain less labor-intensive, you can refer to the construction instructions decorative pond, it will only be necessary to retrofit it with a pump.
To build a fountain with your own hands we will need:
- pump depending on bowl size
- super strong film
- shovel
- stones of various sizes
- elements for decoration
Having decided on the type of pump for water supply, it is necessary to move on to the decorative component of construction. There are many ideas on how to make a fountain with your own hands. They can be large and deep, for example, if you take as a bowl old bath, but a basin or clay pot as a base will allow you to create a decorative mini fountain with your own hands.
So, what can you use to make a fountain with your own hands? The correct answer, of almost everything. The main and most obvious rule is that the materials used should not be destroyed by water and should not affect its quality.
Of course, the main and most expected materials will be stones of various sizes. Such a fountain will repeat pictures of untouched nature, where water flows over stones, shimmering in the sun
Ideas for decorating a garden fountain using improvised materials
DIY fountain made from empty glass bottles. Try to choose wine bottles that match the shape and color, remove the labels from them and place them in a chaotic manner in the center of the fountain. This way the water will flow beautifully over the glass, creating fancy reflections.
For skilled craftsmen, an option may be suitable in which a stream of water will pour directly from the neck of the bottle. To do this, you need to carefully cut the bottom of the bottle and insert a hose with water there.
One more in an interesting way decorating the fountain will be to decorate it in the style of a tea party. You will need a ceramic teapot, strong wire, a tea pair and pebbles to hide some of the design details.
The teapot is suspended in the air with the help of a wire, and water is poured from it directly into the mug. What’s not a wonderful landscape for long evening gatherings?
Artificially aged ceramic pots look interesting in combination with trickles of water. Try to create a composition in the style of Provence, surround a fountain from a ceramic pot with blooming lavender or other noble herbs and see how the spirit of a French village will be added to your garden.
Photos of DIY fountains
The most extravagant and interesting decoration home or country land plot are bodies of water. The beating stream of water gives a special zest; such a piece of paradise not only arouses the admiration of guests, but also becomes best place for relax.
You can understand how to make a fountain with your own hands if you study all the nuances of constructing this mysterious hydraulic device.
Basic rules for installing a fountain
If you decide to make a fountain in your country house or at home, then you must initially understand what type and size it will be. It is recommended to design a device of medium size relative to the area of the site.
Also note that the power of the pump for supplying water will depend on the size of the fountain. It is highly not advisable to install it:
- Near a residential building. This can cause mold to form on the walls.
- Avoid open spaces. Due to direct hits sun rays the water will begin to bloom.
- Near planted trees. Roots can damage the waterproofing.
- On slopes and uneven ground. Choose a lower, level place.
So, ideal option It is considered a place protected from wind and sun. It’s good if there is a source of water and electricity nearby.
Types of fountains
If you pay attention to the photos of home fountains, you can identify the following types of typical hydraulic structures:
Fountain with pump. This is the most popular option among consumers due to its practicality and operational efficiency. A pump placed at the bottom of the device ensures uninterrupted circulation of water.
Open design. Here water is supplied to the nozzle, and a jet is formed due to the difference in water level. Experts advise installing a water tank above the nozzle. This will help regulate the water supply pressure.
Unusual buildings
Decorative fountains for the home are not only beautiful, but very original for any interior. Let's look at a very simple water design.
For construction you will need:
- large flower pot with tray
- water pump
- paints and decorative accessories
Take a pot and make a small hole in the bottom, then install a pump under the pan, while the tube itself must be passed through the hole.
We paint the pot itself in the color you like using paints, fill the bottom with pebbles, and decorate with all possible decorative elements, for example, artificial figures. Finally, fill the container with water.
So, your DIY mini fountain is ready. You can emphasize its uniqueness by equipping it with lighting; this will give a unique and slightly magical atmosphere in the evening.
Beautiful waterfall
A self-made waterfall fountain looks very elegant. It is a mistake to think that only a professional can make such a design. A novice master can also create a wonderful creation.
To make a cascading waterfall one meter high, you need the following:
The initial stage is digging a pit under the water bowl, and it is necessary to build a compacted embankment in the form of a slide. Such a simple manipulation will help create elevation.
Waterproofing stage - for this, we cover the bottom and, accordingly, the walls of the pit with a special non-permeable material, while laying the canvas on the sides with a margin of half a meter.
Then we stretch the water supply pipe through the hole so that its end is at the top of the planned waterfall (we bend the edge by 30 centimeters).
We lay out a metal mesh at the bottom of the pits, then fill it with concrete, approximately 15 centimeters. It is also recommended to concrete the walls of the pond bowl. We leave the structure unchanged for a day.
We decorate the building. To do this, we make three steps on a compacted hill in increments of thirty centimeters. Smooth surface decorate with decorative colored stones, pebbles, etc. We fill the film around the perimeter with any material you like (for example, crushed stone, marble).
Finally, turn on the pump and fill it with water. We enjoy our work, watching how the water flows evenly down the steps of the home waterfall.
Photos of DIY fountains
Cozy terrace, aroma blooming garden, a calming herbal tea... This associative series to the phrase “rest in the countryside” can best be continued by the idea of building a fountain at the dacha with your own hands. Flowing water allows you to relax for your own pleasure, push aside sad thoughts and unsolvable problems. The movement of water jets is another element of comfort and special color characteristic of a country landscape. To implement this idea, you can hire specialists, or you can show your imagination and build a small structure yourself.
The principle of the fountain and its types
Any fountain is a device that raises a stream of water under pressure to a certain height and sprays it in the air or concentrates it into waterfalls. Therefore, as part of the design, two main components can always be distinguished:
- a source that creates a stream of water;
- the receiver where this water flows.
According to the principle of operation, all fountains are divided into two large groups:
- Circulating. They are characterized by closed system movement of water from the source reservoir under the action of the pump force upward through the pipe, followed by flowing into the receiving reservoir. An important point is to provide a water purification and disinfection system. All floor and indoor hydraulic structures, as well as small fountains for summer cottages, are made of this type.
- Flow-through. A prerequisite is a connection to a sewer system, so a tank as such is not required. This type is most in demand when arranging hydraulic structures as part of landscape gardening.
Another classification of fountains is based on the shape of the water jet provided by the nozzles and other structural elements used.
Cascade
The best option for areas with height differences or large areas. When arranging a cascade, you can realize any design idea based on the overflow of water flow from one container to another. By adjusting the height of these differences, you can get rapid waterfalls or leisurely riffles.
The principle of a cascade fountain is that water flows from one container to another
Geyser
One of the most popular options for organizing garden and country fountains. It is a structure that ejects water under pressure perpendicularly upward or at an angle. By changing the height of the jet, you can create a cozy babbling fountain or a multi-meter noisy stream of water.
Illumination will make a classic fountain even more impressive
Bell
One of the easy-to-implement solutions that also performs a decorative function. The height of the water column is usually small, but due to a special nozzle, the liquid is evenly distributed around the perimeter, forming a continuous water hemisphere.
The bell fountain will become a very original design element of the site
Spray
This type of fountain includes a diverse group of hydraulic structures that differ from each other in the nature of the jet:
- single - small vertical jets of one given height;
- tiered - small vertical jets of different heights;
- spinner - a rotating jet forms a spiral flow;
- water jet - water comes out of the hole in decorative wall at a given distance from the surface of the earth;
- fishtail - vertical jets fan out and fall in the form of a solid wall;
- tulip - the stream forms a funnel expanding upward and falls into a thin dome.
The number of jets and height of the fountain can be any, depending on your preferences
Which pump to choose
A wide range of pumps allows you to choose best option for use in specific conditions. First of all, you should decide on the type of pump - submersible or surface. To the benefits submersible pumps include:
- invisibility from prying eyes;
- ease of installation - installation involves lowering the pump to the bottom of the reservoir and connecting the pipes and power supply;
- low noise level;
- efficiency;
- optimal for small fountains.
Surface pumps also have their advantages:
- water supply to any part of the fountain;
- free access to equipment;
- there is no need to clean for the winter;
- optimal for complex hydraulic structures on a large surface of a reservoir.
Having decided on the type of pump, pay attention to the maximum pressure and performance of the unit, reflected in the comparison table.
Table: equipment parameters for different types of fountains
How to make a fountain with your own hands
To build a simple stone fountain design you will need following materials and equipment:
- water pump from 1100 W in power;
- a copper pipe with a cross-section of 15 mm for delivering water from the pump to the top of the fountain;
- a reservoir made of waterproof material for the pump with a volume that allows the pump to be immersed in such a way that at least 150 mm remains between it and the edge of the bowl;
- a plastic or metal pipe for wiring the electrical cable;
- coupling for connecting a copper pipe and a pump;
- float type water supply regulator;
- metal mesh to protect the tank from debris;
- drainage gravel;
- polystyrene pipe for the pump cord outlet;
- bars for attaching the mesh;
- stones for the upper decorative part of the fountain (can be replaced with clay pots, concrete bowls, etc.);
- faucet with adapter and filter.
Having prepared everything necessary materials, begin to implement the algorithm step by step instructions on how to build a fountain with your own hands:
The design of any fountain consists of underground and above-ground parts
- Choosing a location. This should be on the leeward side of the house to avoid moisture getting on the walls of the building. The distance between the building and the fountain must be at least three times the length of the hydraulic structure.
- Digging a hole for a fountain. The dimensions of the pit completely depend on the size of the selected tank: a little wider so that it can be freely installed, and 5 cm above the edge of the sides. They provide for excavation of soil in the groove for the electrical cable.
The pit should be slightly larger than the prepared tank
- Tank installation. The bottom of the prepared pit is leveled with small pebbles in a layer of 40–50 mm, the tank is installed and strengthened. Sand is poured into the grooves between the sides and the ground, which is carefully spilled, compacted and decorated with small stones. Or they simply line the bottom of the pit and side surfaces waterproofing material. IN plastic pipe required length draw power from the pump, place it in the prepared groove, insulate it and cover it with earth.
The reservoir can be made of plastic, ceramic or metal
- Pump installation. When placing, take into account the need for regular preventive inspection and maintenance of the device.
It is important to ensure easy access to the pump for further maintenance.
- Laying the mesh. A galvanized metal mesh will serve reliable protection from debris and foreign objects.
To access the pump, a hinged hole is cut in the mesh
- Installation of the base. Connect to the pump metal pipe to supply water upward (its length should be 100 mm greater than the expected height of the fountain), and lay on top of the metal mesh wooden beams. The timber is taken with a section of 50x50, and their length should be 80–100 mm greater than the length of the tank. This will ensure the stability of the structure and prevent it from falling into the hole.
secure the water supply pipe well
- Preparing the stones. In each stone (pot, bowl, etc.) intended for the fountain leg, it is necessary to drill a hole, the diameter of which will be 0.5 cm larger than the cross-section of the pipe. To avoid overheating of the drill and cracking of the stones, they must be periodically watered.
The hole is made using a hammer drill or impact drill
- Installation of the structure. Stones, pots or bowls are placed on the pipe like a children's pyramid, fastened together with silicone-based glue. After it has dried, the tank is filled with water 150–200 mm above the pump, the unit is connected to the electrical network and a test run is performed to adjust the pressure.
The ground part can be made in the form of a pyramid of stones
- Decorating the base of the fountain. You can arrange a small pond, make masonry, plant ground cover plants etc. It is important that the decor does not interfere with monitoring the water level in the tank twice a month and carrying out other preventive work if necessary.
Is it possible to make a fountain without a pump?
There are fountain designs that do not provide for the use of a pump. According to the implementation option, there are two ways to solve this problem:
Decorative design
Decorating a country fountain is the final stage of construction. Depending on the owner’s capabilities, the general concept of the landscape and one’s own preferences, the following options can be used:
Sculptures and plaster figures. One of the simplest and most popular options for finishing the above-ground part of the fountain. The figurine can be purchased at finished form or done independently. It can be alone or form a plot composition.
You can make a composition out of sculptures
In some cases, such a sculpture becomes one of the elements that releases or receives a stream of water. With this decoration option, you should worry about installing it in advance - before the test run of the fountain.
Sometimes sculptures perform not only an aesthetic function, but also the function of receiving water flow
Backlight. Particularly popular and relevant in Lately light-dynamic type of lamps. They pulsate or change color in accordance with the movement of the jets. This option is often used in the decoration of city, garden and park fountains.
When creating lighting, you can combine different colors
Monochrome lighting options are the best option for country house Location on small area. The color of the lamp can be standard, performing a utilitarian function, or it can shade or harmonize with the color concept of the dacha.
The color of the lamp can be selected in accordance with the design of the site
Stones and rubble. They often disguise the base of the fountain and the water reservoir and pump located underneath it. Options with arranging large stones in a chaotic manner on small pebbles are acceptable. The recommendation from designers in this case is to use no more than two types of stone, which will avoid a clutter of colors and shapes.
Using stones you can create real miniature grottoes on your site
Options for uniform backfilling with blued pebbles have also become widespread, which creates the effect of the presence of a reservoir - a dry lake, stream, etc. This technique allows you to connect the fountain with other decorative elements of the site.
The stone “stream” looks especially original
If the pebbles are painted in different colors, then around the fountain you can lay out ornaments and patterns reminiscent of a flower bed, Indian motifs, etc.
Using colored pebbles you can create any pattern
Pond with plants. If you choose to arrange a small artificial reservoir, then it is decorated aquatic plants taking into account the requirements for lighting, water temperature, etc. Preference should be given to unpretentious specimens.
A pond surrounded by all kinds of plants gives you the feeling of being in the wild.
Placing the fountain among decorative foliage plants, the shape of the crown or leaf blade of which is in harmony with general style hydraulic structure.
Even a small, discreet fountain will sparkle with new colors surrounded by plants.
Stylization of the material used for the main part of the fountain to match the overall concept of the landscape. You can even make a mini fountain with your own hands. Here, as with sculptures that serve as sources or receivers of water, installation should be carried out in advance - before the test run of the structure.
There is room for such a fountain even in a small area
Care and maintenance rules
Exploitation home fountain does not require special knowledge, skills or abilities. It is enough to follow simple rules:
- change water filters regularly;
- monitor and replenish the water level in the tank twice a month;
- dismantle removable structural elements for the winter;
- When cold weather sets in, cover the pit with a wooden sheet made of boards or plywood.
Thus, owners of suburban areas can independently build a fountain with their own hands from scrap materials. Hydraulic structure can be decorated in uniform style with the surrounding landscape or become an accent of the landscape. Simple rules Maintenance does not require special skills or significant effort, and the variety of models allows you to choose an option for every taste and budget.
By making an indoor fountain with your own hands at home, you can not only save a fairly large amount of money, but also purchase a useful interior decoration. According to the Chinese teachings of Feng Shui, the symbol of Water, placed in the northwestern part of the home, ensures prosperity in the family. An excellent embodiment of the moving element in the house can be a babbling brook, a cascade of waterfalls or another form of fountain.
Small decorative cascades for interior decoration should be made taking into account the fact that there is nowhere to drain the constantly rising water at home. This means that the amount of liquid in the system must be constant. To comply with this requirement, the fountain installed in the room must be made to operate in a closed cycle. In this case, the water will collect in the storage tank. The pump installed in the system must lift it to the top point of the structure, from where the liquid will flow out, again falling into the tank.
In order for a thin stream to beautifully flow, drip or shoot up, decorative obstacles should be made of shells, stones, shards or other objects in its path. IN Ancient China and Japan, specially trained craftsmen built a channel for a stream so that it would babble beautifully. Tuners of the “music of water” created real masterpieces from ordinary pebbles, laying them so as to form cascades with depressions into which drops and streams fell, producing the noise characteristic of a stream or waterfall.
What to prepare for work?
To create a mini fountain, you need to choose a suitable pump. Its power depends on the height to which the liquid needs to be raised. This value is dictated by the dimensions of the structure and is determined individually. If you want to make a fountain with your own hands so that the stream of water shoots upward, it is better to buy a pump with more power and a regulator. To assemble a small tabletop cascade, an aquarium pump for filtering water is sufficient.
Before you make a fountain with your own hands, you need to prepare:
- a reservoir into which water will flow;
- silicone tubes;
- waterproof glue;
- materials for decorating the product.
The reservoir bowl should be spacious. In addition to its direct function - collecting liquid circulating in the system - it will also serve as the basis for a composition made of stone or other materials. Some of them can be placed directly in the container.
What to do if there is no pump?
A low-power pump that can raise water to a height of about 20 cm can be made independently. For this you need:
- a motor from a children's toy, camera or other, protected from water;
- batteries (phone or finger batteries);
- charging connector if using a mobile phone battery;
- LEDs - optional;
- switch of any type;
- electrical wires;
- plastic gear;
- a small round container (aerosol cap, plastic bottle);
- waterproof glue.
Make an impeller for supplying water from a gear from an unnecessary mechanism: adjust the wheel to the diameter of a round container, glue 4 pieces of plastic crosswise onto the shaft: fig. eleven). Drill a hole in the bottom of the container for the motor shaft, and in the side for water. Place the motor shaft inside the container, glue the motor housing to the bottom of the pump reservoir from the outside, and secure the impeller to the shaft inside (2). Cut a piece of plastic, make a small hole in it, and seal the open part of the pump body. Attach a tube to the hole in the side and seal the connection (3). Connect the wires to the motor and carefully insulate the connection, protecting it from water. Any sealant will do for this.
To connect the motor to the power source, use diagram (4). It is important to remember that batteries should not be exposed to moisture. You can attach them to the outside of the pool, and glue the switch here.
You can include a resistor in the circuit to adjust the speed of rotation of the motor or LEDs for decorative lighting.
Assembly method
A homemade or purchased pump must be attached to the bottom of the tank (storage container). Its depth should be such that the pump is completely submerged in water. You can hide the pump in different ways: place a mesh cover on top of it, on which pebbles or shells will be placed to represent the bottom of a reservoir, or hide it inside a large decorative element. One of the design options - a dry fountain - provides for a completely hidden water surface in the storage tank. To do this, you need to lay a grate on top of it and secure the stones. The water will pass through the stones into the container without forming a visible pool. Rice. 2.
A short master class will tell you how to make a mini fountain in an apartment with your own hands from ceramic pots (Fig. 3):
- 1 Prepare 2 ceramic pots and 5 trays (2 large and 3 small). Cover them with waterproof varnish, drill a hole for the tube in the center of 1 larger and 1 smaller tray. Make cuts on the edges of the pallets to drain water.
- 2 Install the pump at the bottom of the tank, following the diagram in the figure. Cover it with a large pot, and lead the tube through its drainage hole and drilled holes in the trays to the very top of the structure.
- 3 Place a smaller pot next to it and secure the tray to it. The next tier consists of 2 small pallets (one is upside down and serves as a base for the bowl from the other). The pallets must be placed so that the holes cut into their sides allow water to flow from one to another, forming a cascade.
- 4 Decorate a fountain, assembled with your own hands from the most simple materials, beautiful pebbles, plants and shells, figurines of aquatic animals or birds.
Such a miniature pond can be placed on the table or given a special corner among indoor plants. Iridescent water will not only enliven and decorate the composition, but will also slightly humidify the air.
Waterfalls in the room
A stylish and fashionable interior decoration is a vertical waterfall (Fig. 4). Making this type of indoor fountain with your own hands is not much more difficult than a mini tabletop fountain. The only difference is the pump power for such a large structure. When looking for a pump, you need to pay attention to the fact that the height of the water column is at least 1.8-2 m. This will make it possible to build a water wall or stream originating from the ceiling of the room.
Before you do home waterfall, you need to waterproof the floor in case the tank leaks. Polyethylene film can be used for this. It is advisable to cover with it a section of the floor 15-20 cm larger than the perimeter of the future structure.
For the panel on which water will flow, you will need:
- thick glass or mirror;
- 5x5 cm bars for support posts;
- base boards top cover;
- pipe plastic diameter 2 cm to distribute water over the glass;
- a block or thick board for the clamp step.
The structure of the fountain supply system is the same as discussed above.
On top of the fountain tray, you need to install and secure a board with a stop to fix the glass in a vertical position. Knock down the frame from the support bars and crossbars on top. The role of the crossbar can be played by the horizontal bar of the top cover.
Drill a piece of plastic water pipe, the length of which is equal to the width of the glass panel, in one line along the axis. The holes should not be located too far from each other so as to avoid the impression of separate streams. Plug one end of the sprinkler tube and secure it to the top cover strip. Install backlighting if necessary.
Place the glass panel vertically, resting the lower edge against the step of the latch. Attach the side parts to the support bars using liquid nails. To prevent water from spreading beyond the panel, sides made of strips of glass, wood, and plastic must be glued to its edges.
Install the pump into the pan and run the water supply tube up to the open end of the distribution pipe. Connect and seal the connection. Hang the front part of the top cover. Decorate your home fountain with your own hands according to your own taste. Through many holes in the sprinkler pipe, streams of water will fall on the glass and flow down it into the pan, creating the illusion of a falling stream.
Materials for decorative finishing indoor fountains, made with your own hands in a tabletop or floor-standing options, can be found in pet stores (colored soil, castles, shells, ships in the aquarium department). Flower shops sell bamboo plant supports and beautiful containers. In the souvenir departments you can find artificial bonsai, figurines of birds and animals.
There is nothing more pleasant than relaxing after a hard day under the quiet splash of water in a man-made stream. The decorative functions of the fountain are perfectly combined with its main purpose - to humidify the air in the room. You can add live indoor plants to the streams of flowing water.
