DIY storage box for locksmith tools. A DIY tool box is more practical than spending money in a store. Making tool boxes: DIY organizer

There must be order in everything! After all small parts wardrobe, cosmetics, tools and other little things stuffed into different drawers are quite difficult to find at the right time. Not finding the item you need, you go to the store and buy a second one of the same thing, and after a while the loss is discovered and you become the owner of two identical items. Thanks to this “circle”, the family budget suffers greatly. That is why more and more different boxes called “organizers for small items” are appearing on store windows. With the help of such items, you can easily put things in order in a clothes closet, in a workshop, in a garage, etc. Of course, you can buy a design that suits you in a store, but it will be much more interesting to make convenient organizers with your own hands. In this article we will tell you how to do this.

Tool organizer

The main pride of any man is his set construction tools. Here you can find everything: from small screwdrivers, nails and wrenches to fairly large screwdrivers, drills, and jigsaws. And all this huge mass of tools often creates chaos in pantries, cabinets and workshops.

To solve this problem, you can use a tool organizer. Since it is more convenient to have two separate storage units for smaller and larger items, this article will look at creating both options.

Wall organizer

To make a wall tool organizer, you will need:

Progress:

• Sand the plywood and boards.
• Drill in three boards required amount holes of the required diameter (screwdrivers, drills, wood cutters, milling cutters and other small tools of similar shape will be inserted into these holes, so the number and diameter of the holes must be selected based on the number and size of these tools).
• Using glue and screws, attach boards with tool storage holes to the bottom of the board.
• Cut another board into 10cm pieces.
• From the resulting blocks, make holders for hammers and planes, cutting out the middle so that the sides remain (as in the picture above).
• Attach the resulting holders throughout the board.
• Screw screws into the free parts of the board; on them you will hang squares, spatulas, wrenches and other tools that can be hung.
• Paint the resulting structure and leave it to dry for 24 hours.
• Coat the resulting tool organizer with varnish and leave it to dry for another day (this and the previous step can be done as desired).
• Using dowels, attach the organizer to the wall, screwing them in every 10 cm.

Organizer - holder for drills, screwdrivers, cutters, cutters

If you don't have space to hang a wall-mounted product or want to have the necessary small tools on hand, you can always make a desktop organizer. It is no less convenient than the previous one.

To make such an organizer with your own hands, you will need:

• An ordinary wooden stump, stripped and sanded, at least 35 cm high.
• Drills of different diameters.
• Drill.
• Sandpaper.
• Varnish and paint (optional).

Progress:

• Drill holes of different diameters in the hemp.
• Clean them with sandpaper.
• If desired, paint and varnish the product.

Organizer for cosmetics

Cosmetics for a girl are like tools for a man. There should be a lot of it, and it should be different. Therefore, it is often quite problematic to immediately find the right jar or tube in the drawer where cosmetics are stored. You can use a cosmetic bag, but such storage is unlikely to solve the problem of long searches for the thing you need. So that each jar, tube and brush has its own place, you can make a cosmetics organizer with your own hands. It won't take much of your time, but it will be a lot of fun.

DIY wall organizers

To create such an organizer you will need:

Progress:

• Cover the metal base with fabric (this can be done with glue or liquid nails).
• Let the glue dry (about a day).
• Glue along the edges covered with fabric wall organizer frame or ceiling baguette.
• Glue a magnet to each jar of cosmetics that you want to place on the finished stand.
• Attach the organizer to the wall using dowel nails.
• Magnetize your cosmetics.

Organizer for cosmetics in small tubes

Of course, the wall stand described above is very convenient and good, but if you have nowhere to place this option, or you simply set out to make a cosmetic organizer for small items, a container of a slightly different type will be more suitable for you. In it you can store mascara, lipstick, blush brushes, powder, eye shadow and other cosmetic accessories that have a similar shape.

In order to make such a cosmetics organizer with your own hands, you will need:

• Bamboo mat.
• PVA glue.
• Wide elastic band.
• Tape or thin elastic band for fixation.

Progress:

• Pass a thick rubber band between the bamboo sticks at a distance equal to the diameter of the cosmetic tubes.
• Glue the ends of the elastic to the ends of the bamboo mat.
• Attach a ribbon near the outer edge of the organizer so that its two ends remain free and can wrap around the bamboo organizer rolled up with cosmetics.

To make such organizers with your own hands, you will have to spend no more than 20 minutes.

Linen organizer

Underwear is a real weakness of women, there should be a lot of it... A lot of it... The more, the better... However, lingerie is such an intimate and delicate thing that it needs to be stored separately. Of course, first of all, the issue concerns hygiene, but the safety of intimate wardrobe elements is also an important issue.

To organize your underwear, make your own organizers. If desired, you can buy them. However, often finding an organizer that matches the size of your drawer is quite problematic. We will try to solve this problem.

Organizer for underwear in a drawer

To make a laundry organizer with your own hands, you will need:

• Ruler.
• Scissors.
• Long pieces of cardboard or plastic.
• Fabric (optional).
• Glue or stapler.

Progress:

• Using a ruler, draw 4 strips on cardboard equal to the length of the drawer and 5 strips equal to the width of the drawer (the number of strips can vary depending on the size of the drawer and your wishes).
• Cut out the marked strips.
• Make cuts on the transverse and longitudinal strips, 2 cm without cutting to the bottom.
• If desired, cover or cover the strips with fabric.
• Insert the longitudinal strips into the cuts on the transverse ones.
• At the edge of the drawer, leave compartments for bras that are equal in length to two compartments for panties.

Organizer box

What do you need to make your own laundry organizer out of a box?

Progress:

• Cover the outside of the box with wallpaper or wrapping paper.
• Cut the required number of cardboard strips (several equal to the length of the box and several equal to the width), their height should be the same or less than 2 cm less than the height of the box.
• Make cuts on the longitudinal and transverse strips, 1 cm without cutting to the end.
• Insert the transverse strips into the longitudinal ones.
• Install the resulting structure inside the box.

Now you know how to make an organizer with your own hands.

There are two types of modern tools - large-sized and so-called small things, which tend to get lost at the most crucial moment. It is for this reason that some of the most popular products in construction stores There are all kinds of boxes and boxes for fasteners and tools. They will be discussed in this article. Together with the site stroisovety.org, we will figure out how to make a tool box with your own hands. We will look at several convenient designs that will not be superfluous in a home workshop.

DIY tool box photo

DIY tool box: where to put large tools

A tool such as a level hand saw, hammer, mallet, etc., in the master’s arsenal represents biggest problem– their dimensions and shape do not allow accurately marking this tool in the workshop. It is also quite problematic in terms of transportation - its sharp edges can easily tear ordinary bags and even ruin factory tool boxes, which, as a rule, are made of fragile plastic. This kind of problem never occurred to our grandfathers. They solved it simply - they took it and put it together from scrap materials homemade box for tools open type, which was distinguished by both durability and ease of use.

Its design looks quite simple - if we exaggerate, then it is an ordinary wooden box with a handle, maximum divided into a couple of compartments. There were craftsmen who managed to install some kind of lid with small sections for fasteners into this box.

Making such a box is quite simple - you will need centimeter-thick boards or plywood and fasteners in the form of nails or self-tapping screws. First, a blank is made - the bottom is cut out, two long sidewalls and two short ones, different from the long sidewalls in their height. In the short sidewalls, at their very top, a slot is made to install the handle. Then all this is collected in a single box - for a person who has an understanding of carpentry, such a box design will not seem complicated at all.

How to make a toolbox photo

The disadvantage of this design is its narrow focus - such a box is good for large tools, but not for small things. In addition, it is open, which poses some problems during transportation - so it would be a good idea to think about some kind of lid. As an option, you can look at the canvas cover - it will cover the tool and will not make the box heavy.

How to make a tool box: option for small tools and consumables

Tool small size and all kinds Consumables Like no other technical devices, they need to be in order - they must be quickly located during operation and not get lost. It is for this reason that the most optimal storage place for such tools is a sectional box with a large number of special fastenings for certain instruments. Such a tool storage box is somewhat more difficult to manufacture, but it will solve quite a lot of problems.

To make such a structure, it is better to abandon boards in favor of 6mm thick plywood. Structurally, this device consists of two shallow boxes (15-20 cm deep each), connected by hinges. When opening such a design, you have access to two halves at once, on one of which you can place small retractable drawers with sections for fasteners and small consumables, and on the other you can place small tool. Here you can put screwdrivers, pliers, all kinds of meters, and much more that you can find in your toolkit.

Tool storage box photo

Making tool boxes: DIY organizer

Today, the tool box organizer has the most convenient and optimal design for use - in essence, it is a sliding system of five or seven small drawers, in which you can place both medium-sized tools and a lot of all kinds of small things. Such a box can be called the most difficult to manufacture, but this does not mean that it is not possible to make it yourself. In fact, everything is simple, and difficulties can arise only with sliding mechanism. Let's take a closer look at the design of the tool box organizer. To make it easier to understand the technology of its manufacture, let’s present it point by point.

As you can see, the mechanism for opening such tools is simple, and doing it yourself is quite possible. The most important point in boxes of similar designs, it is necessary to properly organize it into sections - with a competent approach to the matter, in these sections you can place everything you need for work.

A good toolbox: simplicity is the key to success

To conclude the topic, I will say a few words about the simplest design called a “matryoshka chest” - the design of this product is quite simple and actually resembles a nesting doll. Essentially, this is one large box into which several small ones are inserted. Anyone who knows how to use it can make such a toolkit. modern instrument. The most important thing here is to clearly calculate the sizes of all individual drawers. In addition to its ease of manufacture, this design has other advantages - in this way you can make an arsenal of any size. The main thing here is not to overdo it so that it turns out to be lifting.

By and large, you can make a tool box with your own hands of any shape and any design - it all depends on your imagination and the availability of free time. Stationary instruments used to equip workshops are quite common. Combined options are no less in demand similar products, which can be used both as stationary arsenals and as portable ones - in most cases these are boxes of a transformable design, individual sections of which can simply be removed and taken with you to an away site.

Making tool boxes photo

In general, there is plenty of ground for thought here, and a very large one at that. The most important thing is to think through the design correctly, since a DIY toolbox should, first of all, be comfortable and light. In this regard, plastic factory products are far ahead, but making them at home is almost impossible. Although, who knows, maybe you can solve this problem.

For quick access to tools, you should properly organize your storage system. An organizer and a tool box help to cope with this. They are made with their own hands from solid wood, plywood, chipboard, various types plastic and tin.

The material is selected based on the size of the product and the skills of the carpenter; each has its own advantages and disadvantages.

Domestic varieties

Open or closed stands and spacious chests of drawers are suitable for stationary storage of tools. In these options, everything depends on their location - a garage or an apartment. In the first case, it is more convenient to organize a stand on the wall required sizes so that everything is open and freely accessible.

Designs with shelves or retractable plywood drawers, cabinets and even a suitcase are suitable for apartments. They can accommodate organizers and cases for power tools and hardware. Small stands can be built on the doors and side walls. The more correctly the filling is organized, the longer the order will be maintained.

To accommodate the main set of tools, wrenches, heads, bolts and nuts, a small container with a handle can serve as mobile options. If the dimensions are large, you can attach wheels to it. Then you should choose the material, calculate the acceptable dimensions, choose the model and type of fasteners, draw up a drawing of the tool box with your own hands or use ready-made proposals. After this, you can begin manufacturing.

In addition to safety, a DIY tool box helps when performing work. Its sorted content, when each item is in its place, allows you to find everything you need over time, without even looking inside.

The standard placement of a hammer, keys and pliers occupies one large compartment. Screwdrivers are inserted into holes on horizontal strips.

Classic drawer options

This type of DIY tool case is easy to make. The accessories of the main set lie in sight, each in its place. It will be useful for transferring outside the workshop. Tool carriers are heavy, so you should not make them large or entirely made of boards. Some parts can be replaced with plywood.

Open with partition

Before starting work, make sure that the workpiece material is dry. To make the first version will be needed following materials and tools:

• pine boards;
• plywood;
• thermal or PVA glue;
• nails and screws;
• hacksaw, jigsaw or grinder;
• drill or brace and wood drill bits;
• hammer;
• chisel;
• tape measure or ruler;
• pencil or marker.

Suitable materials include plywood or scraps. pine boards. According to the drawing, markings are made and blanks for the body are cut out. Special grooves are cut out in which the partition will stand. To organize them you will need a router or a hacksaw with a chisel.

The drawing shows classic sizes, which are optimal for assembling the box. All blanks are cut according to the diagram, When changing one parameter, you must proportionally subtract or add from the others:

• transverse walls - 2 pcs.;
• sidewalls - 2 pcs.;
• groove for the partition.

Sand all prepared elements and assemble a rectangular box. To prevent the structure from falling apart, the fastening points and ends of the workpieces are coated with glue. Additionally, the box is knocked down with small nails or screwed together.

At the top of the plywood blank, a handle is cut out with a hacksaw, jigsaw or grinder. The prepared grooves are lubricated with glue. After this, a partition is installed in them.

Handle linings are made from blocks. The corners of the workpieces are processed with a plane and sandpaper, and secured with glue or nails. From wooden slats, cut to the size of the partition, you need to make holders that are placed horizontally on the partition. Suitable holes are drilled for screwdrivers using a drill. Pliers, wire cutters, etc. are placed in rectangular grooves.

The entire structure must be covered protective composition. For this you can use varnish or paint material with special additives.

Organizer in a stool

With this design of a tool organizer with your own hands, you can carry the tool to the desired place and sit on it and reach a place that is slightly higher than your height. The materials and tools are the same as in the previous case. The following are cut from plywood:

1. Cover 550x380 mm with a cutout in the center 140x40 mm.
2. Longitudinal drawers 470x150x540 mm and a bevel angle of 75°.
3. Two sidewalls 306x380 mm.
4. The legs and handle are made of bars 385x40x50 mm. Saw off bevels at the ends at an angle of 15°.

Assembly is done with screws. Sharp corners are rounded with sandpaper. The product is cleaned of dust and coated with a protective compound.

Type of homemade carrying

If you want to make something more elegant with relief shapes on the side posts, this homemade tool box is just right. First you need to take boards 16 mm thick. Make parts from them, as in the diagram, and take a round aluminum stick or other metal tube.

Along lines parallel to the edges, holes are drilled on the side walls for self-tapping screws to fasten the structure. Sanding paper or electric machine burrs are removed and smoothed sharp corners. After this, the prepared parts are assembled: the bottom and sides are fastened with glue and screws.

Using the same marking method, install vertical racks, between which the horizontal handle is fixed. Screwdriver holders are screwed in with self-tapping screws. The entire surface is cleaned of excess glue and dust.

For protection, the product is coated with varnish or paint. Once dry, the box is ready for use.

Every House master knows that it is much more convenient to store and carry a tool in a special tool case. If you do not have a separate workshop and workbench, then this becomes the only possible option in order to collect all the tools in one place.

It would seem: it’s even simpler - a tool box, what could be special about that. However, this is only the initial impression of a person who has not encountered this problem in real life.

A tool box should be not so much spacious as it should be practical, provide easy access, allow you to store not only the tools themselves, but also consumables or accessories that will help you in everyday work.

Its design must be strong enough to serve faithfully for many years. In this article we will focus on all the implicit criteria for choosing a tool box, consider issues related to design features and help you understand the variety of products on the market.

If you look at the price lists of companies offering products for craftsmen, and pay attention to the photographs of tool boxes presented, even the most experienced craftsman will note the variety of various designs different sizes, capacity and made of various materials.

How not to get lost in this variety and choose exactly what you need, while saving the family budget and getting the optimal combination of price and quality - read about it in this article.

Modern tool box

If we use to store business papers and documents in Everyday life organizer, then the tool needs its own case - a special tool box. You can divide tool boxes into professional and universal, which are most often used in the household.

Our grandfathers generally made a toolbox with their own hands, but today there is no need for this - you can always find what you need on sale at a very reasonable price. Naturally, those who like to do everything with their own hands still have the right to express themselves here and assemble an original case that meets all individual requirements.

Professional boxes are generally made for specific sets of tools, which depend on the type of activity.

Naturally, in this case, it is possible to distribute the contents in the most optimal way, to provide everything that is required: from special mounts for specific devices and tools, to drawers for consumables and spare parts.

All tool boxes are divided into two types:

Cases. Such tool boxes are a flat suitcase with an opening design and compartments of a certain shape for specific tools: drills, keys, screwdrivers, etc. There are designs with customizable partitions that allow you to change the internal arrangement.

Container type box. This design usually has an opening top. Inside there are several compartments separated by a partition. The design includes separate lockable drawers.

Simple and small designs have a handle for transportation. More complex designs can be mounted on trolleys, have drawers, many compartments and separate boxes assembled into a single structure.

Container designs are more versatile, spacious and easy to use, but they are inferior in ease of access to case-type boxes.

Homemade designs

It is impossible to unequivocally answer the question: how to make a tool box with your own hands, since there are a huge number of options, unlimited by anything except your imagination. I would like to note that you can use old paper cases, bags, or make a complete box yourself. The material used is metal or wood.

Internal partitions are also made of wood or plastic. The lids are hung on hinges; it is necessary to provide a lock that will protect against accidental opening.

The finished box is painted or sheathed with a handy one and suitable material, both outside and inside.

Not obvious aspects of choice

In the selection process, first of all, look at the material from which the case is made.

Plastic tool boxes are lightweight and easy to use and repair. Despite all this, they do not withstand mechanical stress and loads very well.

Stronger and more durable metal tool boxes made from aluminum, its alloys or steel. With greater weight, they are more durable, but require periodic maintenance: restoration of paintwork, cleaning of rust and traces of corrosion. Among other things, metal boxes are more expensive.

If you need to transport bulky and heavy tools, it is better if it is a tool box on wheels.

Homemade designs most often represent wooden box for tools. Main disadvantages: bulky, heavy weight. Moreover, for wooden structures have a specific advantage, namely: wood stores metal tools well, since it absorbs moisture from the surrounding space.

Keep practicality in mind: the drawer should provide easy access to all tools. It must have a fairly reliable case that protects the contents from moisture, dust and external influences.

It’s not always convenient when there are too many compartments and drawers inside: you can get confused in them and spend a long time looking for what you need.

Pay attention to the hinges and lock - as practice shows, these are the elements that most often break.

Photo of tool box

Practical storage systems for the garage or workshop.
For many people, the garage is not only a place to store a car, but also a real automotive, metalworking and carpentry workshop. Therefore, it is important that everything is always at hand and in the right place. But sometimes it’s so difficult to understand the variety of screwdrivers, pliers, scissors, drills and other utensils that are stored in “men’s Eden.” This review contains simple and yet effective ideas that will help you create almost ideal storage systems in your garage.

1. Magnetic tape

Magnetic tape for storing small metal parts.

Magnetic tape pasted on the wall in the garage can be used to drill storage, scissors, bolts, nuts and other small metal parts. Such magnetic holder very convenient to use and will help prevent the loss of small but important spare parts.

2. Plastic containers

Rack made of plastic containers.

From large plastic containers and pieces of wood, you can build a large rack for storing tools, wires, spare parts and any other things. Organizing such a rack will allow you to restore order and significantly save space in your workshop or garage.

3. Rails

Rails for garbage bags and paper towels.

On one of the free walls of the garage you can place several small rails on which you can conveniently place rolls of garbage bags, paper towels, sandpaper, tape, coils of rope and much more.

4. Furniture brackets

Brackets for storing furniture.

Many summer residents use the garage to store folding outdoor furniture. So that it does not stand in the corners and does not take up much space, make a vertical rack for it with wooden or metal brackets and screw it to one of the free walls.

5. Jars

Storage of nails, bolts, screws and other small items.

Bolts, nuts, nails, self-tapping screws, screws and other small things do not take up much space, but storing them mixed is extremely inconvenient. Jars with lids screwed to the bottom of a wall cabinet or under the desktop will help you put these things in order.

6. Ceiling grille

Grid for storing pipes and baseboards.

A plastic grid screwed into the corner of the garage under the ceiling is ideal for storing leftovers. water pipes, skirting boards, profiles and other long things. Such a storage system will help significantly save space in the garage and prevent possible breakdowns fragile building materials.

7. Organizer for screwdrivers

Wooden organizer for screwdrivers.

A small practical organizer for screwdrivers that any man can make by simply drilling the required number of small holes in a block of wood. This product can be hung on one of the walls of the garage or workshop to store all the screwdrivers in one place.

8. Vertical storage systems

Vertical panels for storing things.

Several perforated panels made of metal or plywood under a table or in a cabinet will allow you to acquire an ergonomic and convenient place for vertical storage of small hand tools.

9. Plastic pipes

Storage systems made of PVC pipes.

Leftover PVC pipes of different diameters can be used to create the most different systems storage For example, pieces of wide pipe screwed to the bottom of the cabinet are suitable for storing a screwdriver, drill and other tools of this type. From pieces of medium-diameter PVC pipes you can make cells for storing various sprays, polyurethane foam, tubes of paint and other containers.

10. Tassels

Hanging storage for brushes.

It is very convenient to store paint brushes and spatulas suspended on a thin wire or on a thin steel rod.

11. Rack for garden tools

Wooden rack for garden tools.

To garden tools did not take up a good third of the garage space, store it on a special rack screwed to one of the walls. You can make such a rack with your own hands from blocks of wood, wooden pallet or pieces of plastic pipes.

12. Multifunctional rack

Pallet rack with shelves.

A wooden pallet, complemented by shelves made from pieces of wooden slats, will become a functional component of the garage and will help to place a huge amount of hand tools and small ones in one place.

13. Rod holder

Fishing rod storage.

A simple wire lattice can be used to create a convenient fishing rod holder. Such a storage system can be fixed under the ceiling so that it does not take up space below and does not get underfoot during the autumn-winter season.

14. Pegboard