Detailed instructions for assembling a double bed, common mistakes. Instructions for the correct assembly and disassembly of a bed with a lifting mechanism Installation of an inset frame under the mattress

Before each person sooner or later the question arises of how to disassemble the bed. Whether the reason is a planned move or replacement old furniture. Correctly and quickly solve the problem is not always within the power of even an adult. The variety of models and the complexity of the design suggests some problems when disassembling them. Dismantling simple products requires no effort. With "cunning", intricate modifications, it is better to cope with an experienced assistant. The online store "Sleep Therapy" offers to read an article that will be useful.

Dismantle the bed

The simplest design, which should not be difficult to disassemble, is a playpen bed. This model is widely used when a child reaches six months of age. Toddlers by this time begin to sit, take an active interest in the surrounding space, and the playpen is the best option. Usually assembly and disassembly of the structure takes a little time. If there is a wrench and furniture wrench of the required diameter, then it is not difficult to unwind all the joints. The main thing to remember, and for a guarantee, you can sketch or photograph what was installed and where. Some modifications will require the purchase and use of specialized tools.

Child safety is a priority! Therefore, such expenses are trifles. The advantage of disassembling furniture with your own hand is the ability to unload your brain by working with your hands.

Disassemble the bed transformer

Modern manufacturers of children's furniture amaze with a huge variety of different modifications. Of course, one of the most versatile is the bed transformer. Usually it consists of several parts interconnected. The assembly of such a structure is a job for experienced professionals. Dismantling can be done by yourself:

How to disassemble a bed, consisting of a bedside table, a pendulum and a base, with drawers for linen located in it? Partial dismantling is possible. This option is required when it is necessary to set the cabinet at the head of the bed, and remove the base. Using a set of keys, it will not be difficult to complete the procedure;
. transformer options, when the models “hide” into each other, are more difficult to disassemble. Without the relevant experience and knowledge, it is better not to do the work on your own. The help of an experienced furniture maker will come in handy;
. if the assembly instructions are not preserved, then do not despair. You can search for a scanned document on Internet sites, contact a furniture manufacturer (every self-respecting company has a resource on the World Wide Web).

If it is decided to carry out the work on its own, then the bed should be disassembled in a horizontal position, in a certain sequence, using specific tools. If you have instructions, this is easy to do, just follow all the assembly points in reverse order.

Dismantle loft bed

The design of such furniture resembles a transformer, but unlike it, it has a greater number of different constituent parts. The process of disassembling a loft bed is difficult for one person to carry out. But with a competent approach to business, you can save your nerves and time. The most important thing is right choice wrenches. Using a high-quality set will allow you to quickly select the necessary elements for work.

It is better to start disassembly from the top, gradually moving down. Fasteners must be stored in a container or box to keep them intact. Unwinding nuts, screws, bolts requires some physical effort, because the wooden parts can be quite massive. This is where you need an assistant. Sometimes the bed is taken apart in order to wash it or repair damage. In this case, it is better not to touch the main structure. Components, spare parts and main mechanisms must be protected.

Dismantle bed with lifting mechanism

Undoubtedly, one of the most problematic designs for dismantling is furniture equipped with lifting mechanism. How to disassemble the bed quickly and efficiently? After all, it consists not only of wooden parts and small fastening metal components, but also of a specialized system. To save space and rationalize the internal space, it is located on the sides of the base and consists of several iron pipes connected at a certain angle.

Usually the storage space in such a bed is divided into two parts. After removing the upper base, they begin to disassemble the crossbar that separates the base itself. The rest of the steps are not difficult. It remains only to unscrew a couple of screws and assemble all the parts in a box. After self-disassembly, you will need to properly assemble the structure. In order not to make a mistake, you need to follow a certain order, and if necessary, then make your own scheme, photograph each stage.

Conclusion

The advantages of self-disassembly of any furniture are obvious, but you should not forget about the disadvantages. After all, the question of how to disassemble the bed on your own can become unsolvable. Each model has assembly instructions, so before starting work, you should carefully read it. This is the only way to avoid annoying surprises, inconsistencies of various elements, and other troubles. It is pleasant for everyone to do the job perfectly, but if there are no necessary skills, then it is better to entrust the dismantling to real professionals, whose experience and knowledge will help solve the problem in accordance with the technology.

Everyone dreams of having a comfortable and beautiful bed, but for small-sized housing it is difficult to choose a model that would simultaneously meet all these requirements. Here it is important to rationally use the limited area of ​​​​the room, so you should pay attention to the option with a lifting mechanism. Self-assembly of a bed with a lifting mechanism according to the instructions in the video is a completely affordable process.

Availability comfortable bed allows a person to get enough sleep and restore strength before a new day. If the bedroom is different large sizes, do not be upset. It is enough to choose a bed with a lifting mechanism, which is characterized by compact dimensions, high comfort and original design. Moreover, the cost of such furniture can be different, so you can choose an option for any wallet. And to save even more, it is worth analyzing how professionals assemble such structures and do the same.

The scheme for assembling a bed with a lifting mechanism is quite simple, but first you should find out the main advantages of such furniture. Products of such a plan provide a person with comfort during rest and sleep, but at the same time they do not take up much free space in the room. The lifting mechanism is attached to a capacious box, inside which you can store bed linen, bedspreads. Thus, with a small area, you can solve the problem of storing bedding. For these reasons, beds with a lifting mechanism are so popular among owners of small city apartments.

For self assembly such a design will need the following tools and materials:

• hardware;
• screwdriver set wrench, screwdriver;
• wrench;
• yardstick;
• building level;
• hammer;
• a sheet of paper, a simple pencil.

Thus, the work does not require expensive equipment or rare tools, which greatly facilitates the preparatory stage.

Assembly steps

The entire assembly process consists of several important steps:

• installation of the box and base;
• fixing legs if necessary;
• installation of corner ties;
• installation of the lifting mechanism;
• installation of a traverse;
• installation of the frame and mattress holders.

The instructions for assembling a bed with a lifting mechanism indicate all the work processes. At the first stage you will need:

• remove all elements of the future design from the packaging film, inspect them for defects. If one of the elements is defective, it will need to be replaced. A frame with cracks is unlikely to be reliable and safe for sleeping;
• lay out the drawers for their intended purpose on the floor with the side with holes up;

• connect the drawers to each other with the help of fasteners, and then hang the head of the bed on the box assembled with your own hands;
• for fixation individual elements construction into a single whole, you will need to use a screwdriver and screws.

Note that in some models, power elements of a longitudinal nature can be used. For example, one-piece longitudinal ties, as well as corners or brackets that are fixed to the frame with screws. This is important to take into account in the process of work.

Case assembly

For ease of assembly, the Selena bed frame is made of semi-assembled blocks:
1 - Front part, 2 - Headboard, 3 - Left plank, 4 - Right plank, 5 - Crossbar, 6 - Longitudinal plank.

Leg mounting

The supports of the structure are fixed on the frame using special platforms located on the longitudinal elements themselves, or screwed separately onto the sides. Then they attach shelves, corners in the upper part of the tsarg. Some bed models do not have free-standing supports, instead of which a one-piece side frame is used.

Experts insist that it is not worth tightening the screws right away, because in the future it will be necessary to align the sides, shelves, corners in a perpendicular plane. The lifting mechanism is fixed in the next stage of work.

Installation of corner braces

This process is carried out after attaching the supports to the bed and is necessary to make the structure more reliable and stable. Each of the corner ties consists of 5 parts:

• the screed itself;
• 2 futorok;
• 2 countersunk head bolts.

To work, you will need to use a 10 mm drill, a screwdriver, a hexagon or a hammer. If it is necessary to disassemble the structure, the presence of a screed will allow you to easily disconnect the parts from one another.

Corner brace

Hoist attachment

At the next stage of work, it is necessary to install and fasten the lifting mechanism to the bed. It is extremely important not to make a mistake when placing it and determining the sides, because otherwise the smooth operation of the mechanism will be disrupted. This will require:

• fix the bed frame on the lifting mechanism. Use screws for this purpose. Before tightening the fasteners completely, be sure to align the gaps between the frame and the base;
• Specify the required level of force to control the model. Installation of the unit in the lifting mechanism should be done by hand with the cylinder up, using nuts with a retaining ring, fluoroplastic washers;
• tighten the nuts until they stop, and then slightly loosen the fastening, leaving a minimum play. The operation of the lifting mechanism should be checked several times.

Hoist attachment

Installation of the frame and mattress holders

It is worth installing comfortable handles on the bed frame for trouble-free control of the structure, as well as a mattress limiter. All work must be completed by mounting the bottom of the bed and putting on a cover on its perimeter.

If the base consists of lamellas (from 15 to 25 pieces, depending on the model), they will need to be hammered into special holders with a hammer. Each lamella is fixed on both sides, so the process may take some time. Now you know how to assemble a bed with a lifting mechanism, so this task will not cause difficulties.

Installation of slats

Possible difficulties

Of course, professionals with extensive assembly experience different kind furniture can easily cope with the assembly of beds with a lifting mechanism. But newcomers to this business may experience some difficulties, which can be found in the table.

Remember a few more important points.

For many people, the purchase of furniture is a significant event. Headsets are not bought every day, I want them to last longer and be comfortable. Most people try to assemble furniture at home on their own, but not everyone knows how to do it right. To better understand how to assemble a double bed, an instruction will help, which describes all the nuances, without which this process can become quite problematic.

Before proceeding with the assembly, it is necessary to check the presence of all parts and components of the bed. Usually the standard set includes:

• headboard;
• longitudinal side frames (tsargi);
• central frame;
• furniture corner (coupling);
• a set of screws of the right size;
• additional orthopedic base.

Assembling a double bed is not easy to assemble, this process requires accuracy as well as care. You should start work clearly according to the instructions, where the assembly is described step by step, a list is given the right tools and materials. First of all, you need to have self-tapping screws, screws, bolts. Of the tools you will need screwdrivers with different tips, a screwdriver, a wrench. To assemble new models of the bed, euro screws can be used, for which specific keys are needed. There will be no extra tape measure, since you will have to measure parts of the parts, and the level, to measure the accuracy of the angles.

Before starting the assembly of the bed, you should remember the basic principles and requirements:

• it is inconvenient to assemble alone, it is better to do it together;
• the room should not be cramped, you need a place to decompose big details, take measurements and cutting;
• bolts and screws should not immediately be strongly fixed, first all the parts must be assembled, and then it is only worth fixing the fasteners;
• assembly instructions need to be kept, sometimes you have to redo something.

Basic workflows

Assembling a bed of any kind consists of important processes, each of which is described in detail in the instructions.

Base

The assembly of a double bed begins with the installation of the base. The border of the base consists of three frames and a headboard. First of all, you need to connect these kings together. IN different models for this there are suitable components in the form of angles, brackets, corner ties, interconnected by screws and bolts. Next, we attach the legs, they can be screwed separately onto the frames or come as a set with the components.

The next step is to attach the corners and shelves that come with the kit to the top of the tsargi. We align everything in a perpendicular surface and only then fix it to the end with screws. If the bed involves a lifting mechanism, then we mount it at the headboard on the side frames, making the play minimal. After all these preparations, we assemble the base into a single whole and attach the central back to the frames.

Lamella fastening

frame

The main element in the bed is its frame, which is a metal frame equipped with special slats, which in the future will not allow the mattress to bend, thereby providing the sleeping person with support for the spine and a comfortable sleep.

standard model

In the standard model of a double bed there is a base, a frame, a headboard. Many people are concerned about the question - how to assemble a double bed - it is necessary to assemble it according to the instructions. It is not difficult if you have the necessary components and tools, adhere to a certain installation technology:

• first of all, with the help of corners, we strengthen the side frames at a height of no more than 0.2 meters;
• set the footboards at the same height;
• we will assemble the ribs - we fasten them five centimeters above our side frames;
• fix the central frame. It is very important to take all accurate measurements, and fix it in the center with the help of special corners.

At this stage, the assembly of the base is considered complete. Another beam is laid on the frame in the center for the mattress pad. Then assembled structure we tighten it to the end with self-tapping screws, maintaining a certain distance of 10 cm. This will achieve optimal rigidity of the product. Wooden parts can be varnished as protective coating and after two days on the bed you can sleep comfortably.

Diagram of the construction of a double bed with transverse bars

To assemble the frame, it is necessary to connect all the elements in series. After that, you need to tighten the screws as much as possible. This procedure is best done with two people.

with orthopedic base

One of the most common types of bases for double beds is orthopedic, the main advantage of which is the uniform distribution of the weight of the person sleeping on it, which does not put additional stress on the spine. An orthopedic base is a special-purpose construction that consists of a frame and lamellae. It is intended to provide the orthopedic function of the mattress. The base can be attached directly to the bed or be a separate component.

How to assemble a double bed with an orthopedic base? For greater convenience, only the frame itself is immediately assembled, without lamellae. This will allow you to quickly attach the base to the bed body in the future. Before starting the assembly of the base around the perimeter, all necessary details are laid out in right order. Using screws of the required diameter, the corners of the tie are fixed on the sidewalls of the frame. Next, connect the side frames, the front of the bed (headboard) and the central frame with bolts, but do not tighten them to the end. When all the parts are clearly exposed and connected to each other at a perpendicular angle, you can tighten the fasteners well.

The metal bar is assembled into one product, legs are attached to it. Then we insert it into the perimeter of the base and fasten it tightly with self-tapping screws. For the normal attachment of the slats to the frame, we put slat holders at their ends and fix them in order in special holes on the base of the rod. We check that everything is well kept and the orthopedic base is stable.

Bed with orthopedic base

With lifting mechanism

Instructions on how to assemble a double bed with a lifting mechanism are slightly different from the assembly instructions for a standard model. This is due to the complexity of the mechanism itself. But if you have at least a little experience in assembling and following the advice of a specialist, assembling such a mechanism will not be a problem.

The main difference from the assembly of the frame with an orthopedic base is that special wedge-shaped joints are used to connect the parts.

To achieve the result, you need to insert the right details into each other and press firmly to the stop. With the help of such connections, the parts will hold tight.

According to assembly instructions bed with such a mechanism, it is necessary, according to the sequence, to connect all the parts together with screws, and then tighten them well. The bed frame is attached to the body only by the lower part of the lifting mechanism, which is already attached to it. Due to the bulkiness of the design, it is better to assemble the assembly together, it will be extremely inconvenient for one master.

Then the lamellas are installed. Start from the front of the bed. We insert the part into a special slot, bending it a little. After a characteristic click, the slats are securely fixed in the bar. We also insert all the remaining parts.

headboard

Such an element of the bed as a headboard can be a continuation of the bed or a separate part of it. It can be soft, upholstered with foam rubber, batting, or hard, in the form of shelves that will perform the necessary functions. After buying a bed, it will be possible to redo or improve an existing headboard with your own hands.

There are several ways to upholster a headboard. You can achieve the desired result using the carriage tie technique. To do this, you need a thick fabric, a sheet of plywood, foam rubber, buttons for decoration, a drill. From a sheet of plywood we cut out a blank of the required size, foam rubber of the same size, as well as fabric for upholstery. We fold all the components and put them on the main workpiece. We drill holes in the right places, put buttons there with twine threaded through them and stretch them to the wrong side. We fasten the folds of the fabric and buttons on wrong side staples, and a cut thick fabric close the wrong side.

Approximately the same methods can be used to make a headboard with an ornament of nails or in the form of soft squares. In some cases, according to the design of the bedroom, it would be appropriate to make a headboard from smooth boards.

A double buildable bed will look great when an advanced headboard element is added to the design, both with a soft look and with a creative approach.

Additional equipment

The bed is the main component of the bedroom set. Sleeping places are located both in small apartments and in large apartments. Today, furniture designers offer more and more new and modern models with various additional equipment.

A box for storing bedding and linen is enough useful thing. With its help, the problem of disorder is solved, blankets, pillows will be kept in order. If we are talking about a sliding mechanism, such a box should not be very large. Today, manufacturers offer modern models that have a continuation of the front of the headboard in the form of a bedside table. It looks very unusual, original and comfortable. On such a prefix, you can put the necessary small things that you want to always have at hand - a phone, an alarm clock, a favorite book.

Super fashionable beds have different lighting. They can be located on the side of the bed, at the head of the bed and turn on with an inconspicuous button. These fixtures can easily replace bulky floor lamps and Wall lights. They have built-in energy-saving lamps, which will last for a long time, and their consumption will be minimal.

Common mistakes

How to assemble a double bed according to the instructions is not an easy question, even following all the instructions, you can make a number of mistakes that can lead to loss of time, improper assembly of the product. Typical mistakes include:

• beginners should not start by assembling massive and large parts. You need to start small, and there will be fewer mistakes;
• before starting to assemble the furniture, the number of parts, fasteners is not checked with the instructions, parts of the furniture are not looked through for chips, scratches, damage;
• inattentive study of the instructions may adversely affect the assembly process - the parts may be similar to each other, which will lead to their incorrect connection;
• headset fasteners may be similar to each other, but used in different connections because of its diameter. And if in one case a long fastener can be used instead of a short one, then a short one will not fit the role of a long fastener;
• when assembling parts on a carpet or any other soft surface, you can ensure that some of the parts are lost;
• most of the bed parts are made of MDF, and if you make holes with a drill, the panels can burst. Bolts and screws are easily screwed in with a screwdriver;
• failure to follow the sequence in the assembly according to the instructions will cause the double bed with a lifting mechanism to be assembled incorrectly;
• if you do not glue some parts special glue, over time will not desired density between them.

I have always loved bedroom furniture. convertible. The available space under the mattress allows you to put a lot of things into the bed frame, this replaces a wardrobe or chest of drawers, which is important for a small bedroom. I decided to make a double bed with a lifting mechanism myself.

I have been making furniture for a long time in my small workshop. The presence of appropriate equipment and a large set of tools greatly facilitated the solution of my task. After a short search in the media, he decided on the design of a bed with a lifting mechanism with gas shock absorbers.

Tools

First, prepare the instrument. Everything you need to make a bed with a lifting mechanism with your own hands is included in the following list.

• Screwdriver for fixing parts of the furniture base frame.
• Roulette and metal ruler for marking MDF sheet.
• Drill for drilling holes in metal parts of lifts.
• Marking pencil.
• Drill for wood and metal.
• A drill and a key for confirmations for assembling fragments of the bed frame.
• Iron for edging with furniture tape.
• Jigsaw for cutting MDF.
• Clamps (2 pcs.) for fixing body parts when assembling the body.
• Hacksaw for cutting boards to the desired size.
• Knife for removing protruding parts of furniture edge tape.
• A set of wrenches and heads.
• Hammer.

materials

The materials needed to make a bed with a lifting mechanism with your own hands were purchased at a supermarket building materials according to the list:

• confirmations - 8 pcs.;
• self-tapping screws 25 mm - 20 pcs.;
• furniture corners (50 × 50 mm) - 4 pcs.;
• metal corner (32 × 32 mm) - 1.4 m;
• MDF sheet 2440 × 1830 × 30 mm;
• fiberboard sheet - 2440 × 1830 mm;
• edged board 1600 × 150 × 20 mm;
• insert frame under the mattress (orthopedic base on a metal frame);
• furniture legs - 6 pcs.;
• edge furniture tape - 10 m;
• gas shock absorbers (425 mm from 800 N) - 2 pcs.;
• metal strip (50 × 3 mm) - 1.3 m;
• PVA glue - a tube;
• bolts, washers, nuts - m 6;
• metal bushings (10/16 mm) - 8 pcs.

The whole process of assembling a bed 160 x 200 with a lifting mechanism with his own hands outlined in the following instructions.

Step-by-step instruction

The work was divided into several stages:

• preparation and assembly of MDF parts,
• installation of an insert frame under the mattress,
• production of lifting mechanisms,
• assembling a bed frame with a lifting mechanism with your own hands.

Preparation and assembly of MDF parts

1. On a sheet of paper I drew drawings of a bed with a lifting mechanism.

1. On a sheet of MDF with a pencil, using a tape measure and a metal ruler, I marked the future details of the case.
2. The MDF sheet was cut into pieces convenient for cutting.
3. On the workbench, I fixed parts of the MDF sheet with clamps.
4. Using an electric jigsaw, I cut out the elements for assembling the bed body 1600 x 2000 with a lifting mechanism.
5. The ends of all parts were wiped with a damp cloth.
6. Pressing the edge tape with an iron, I ironed all the ends, except for those facing the floor.
7. Exposed headboard (1664 × 772 mm), two side drawers (2054 × 296 mm), back wall(1664 × 296 mm) and a cross board (150 × 1608 × 20 mm).
8. From the outside corner connections drilled 2 holes for confirmations.
9. I installed the fasteners with a Phillips screwdriver.
10. The heads of the confirmations were closed with plastic plugs on PVA glue.
11. Inside 4 corners, I installed plastic corners with a screwdriver.
12. To ensure additional rigidity of the frame, I installed a transverse board, connecting it to the sidewalls with metal corners on screws.
13. The fiberboard sheet was cut with an electric jigsaw to the dimensions of 2054 × 1664 mm.
14. The assembled frame was placed on its side. Around the entire perimeter of the bed, I fixed the bottom sheet of fiberboard with screws.
15. From below, at the corners of the frame and in the middle, the tsarg drilled holes. Put the legs in them. plastic supports provide easy movement of furniture on the floor. When wet cleaning the premises, the legs exclude the contact of the MDF with the wet floor.

Installation of an insert frame under the mattress

I bought an inset frame in disassembled form, which is convenient for transporting it in transport. Following the instructions, I assembled the retractable base without much difficulty. To do this, you need a wrench and a screwdriver.

Manufacturing of lifting mechanisms

Not everyone is able to make lifting mechanisms themselves. They can be purchased assembled in a building supermarket. I decided to make the lifts myself. Lifts made according to the drawing.

For the manufacture of mechanism components, it was required:

• corner 32 × 32 mm, length 700 mm - 2 pcs.;
• steel strip 50 x 640 x 3 mm - 2 pcs.;
• ties 150 mm long - 2 pcs.;
• ties 430 mm long;
• hinge bushings - 8 pcs.;
• gas shock absorbers - 2 pcs.

The only difficulty was the formation of vertical deflections in steel strips for the hinged fastening of the lower ends of the levers. I had them made in a locksmith's shop using a small press.

Assembling a bed with a lifting mechanism with your own hands

The most difficult operation remained - the assembly of the bed frame and the lifting mechanism into a single structure. For final assembly I asked two of my friends to help. The work was carried out according to the items in the following list.

1. With the help of two assistants who held the inset frame, I bolted the upper parts of the lifts to the frame.
2. On the outer side of the sidewalls, the bolt heads were closed with plastic plugs in the color of MDF.
3. I finally checked the reliability and correctness of fastening of the entire movable bed structure.

Labor and cost

The amount of working time spent on making the bed is shown in the following table.

Taking into account the time spent on buying, transporting materials and interruptions in work, the production of this furniture took me 3 days.

All purchase costs necessary materials recorded in notepad. They made up:

• hardware (confirmations, bolts, nuts, washers, bushings, screws) - 100 rubles;
• furniture corners - 20 rubles;
• steel corner 32 × 32 × 1400 mm - 20 rubles;
• MDF sheet 2440 × 1830 x 30 mm - 2800 rubles;
• fiberboard sheet 2440 × 1830 mm - 200 rubles;
• furniture legs (6 pcs.) - 60 rubles;
• edge furniture tape (10 m) - 70 rubles;
• two gas shock absorbers - 2000 rubles;
• edged board - 50 rubles.

Total: 5320 rubles.

I took this bed to the dacha. And for my bedroom I made another model, slightly different in the width of the body. new bed with lifts I assembled it with my own hands measuring 180 × 200 cm. This time I made the case from chipboard. Putting a thin foam rubber, covered the outer surfaces of the case. I did it with a stapler. It turned out very nice and inexpensive.

Each of us needs to know the basics of proper disassembly and assembly of a bed in our own apartment. It may be necessary to disassemble a child's or adult's bed unexpectedly. The reasons may be the rearrangement of furniture, moving to new apartment or house, replacing old furniture with new.

Design dimensions may vary. This article will tell you how to properly disassemble and assemble the product.

How to disassemble the bed? When disassembling by yourself, the furniture should be installed in a horizontal position. If the instructions were left with the purchase, then you can use it when parsing. It will be difficult for one person to independently disassemble furniture. One of the important points is correct selection wrenches.

To disassemble the bed should always start from the base and only then proceed to the removal of the frame. To access the base from it you need bed linen, a mattress and pillows. To disassemble the base of a wooden bed, you will need a special key for unscrewing screws and self-tapping screws.

Parsing the frame

Many beds have reinforcing bars on the frame. The screws on them are unscrewed with a screwdriver. Simultaneously with the slats, the support corner on which the base lay was disconnected.

On the frame, you need to unscrew all the screws on the metal corners. Next, unscrew side walls and backs. After their analysis, the remaining small parts, central panel.

The easiest way to disassemble the bed is in the form of an arena. The model is bought for a child. Assembly and disassembly of the arena does not take much time.

To quickly disassemble the playpen, you will need a wrench and furniture wrench of the desired diameter. Initially, you need to disconnect the base with drawers, after which the side panels and backs are removed. Next, the fastening of the base under the mattress and the long sidewalls are disconnected.

Every man can disassemble the bed, regardless of the model. One of the main rules when disassembling children's furniture: absolutely no rush. Rushing can damage the wood flooring.

It is best to carry out the disassembly in accordance with the instructions that came with the purchase. If you have problems and you can’t disassemble the bed yourself, we recommend that you contact a specialist.