Chaise lounge: types, materials, options, drawings, making it yourself. Do-it-yourself homemade chaise longue for a summer house Do-it-yourself wooden lounger, drawings with dimensions

The word "chaise lounge" is immediately associated with comfortable stay Outdoors. In addition, a comfortable portable chair will emphasize the style and individuality of a summer cottage or garden plot. A store-bought lounge chair can be quite expensive, but you can easily assemble it yourself from scrap materials.

Chaise lounge - general design principle, varieties

Any chaise lounge is a folding chair on a frame, often with an adjustable backrest. The word “chaise lounge” comes from the French expression Chaise-longue - “loafer”.

Varieties by purpose

Depending on their purpose, sun loungers have different configurations.

1. For a dacha and local area.
2. For beach.
3. Baby chair.

Varieties by design

According to their design, sun loungers can be seated or reclining.

1. Standing folding chaise lounge made of wood with a hard seat. More often made from wooden slats, rather than plywood or sheet plastic, to make construction lighter.
2. Standing folding made of wood with fabric.

   Fabric seat can be easily removed for washing or transport

3. Standing folding aluminum tube with fabric seat.
4. Recumbent folding with wooden seat.
5. Recumbent lounge chair made of aluminum tubes with fabric seat. In fact, it is very close to the folding phone so familiar to us all.
6. Hanging chaise lounge.

Photo gallery: the variety of sun loungers has no limits

Products made from environmentally friendly materials are popular among summer residents A chaise longue with a plastic seat in a classic frame is suitable for the beach A chaise longue can be a type upholstered furniture The Leonardo chaise longue is equipped with a mattress The fabric for the seat should be strong and dense, not subject to stretching The simplest folding garden lounge chair "Valdai" is the most a budget option Non-folding sun loungers are best used permanently Chaise longue Cosatto - minimalist plastic and metal Chaise longue CHAISE LONGUE is made of thick plywood

Selection of design and material for construction

You need to clearly understand what you would like to receive and what capabilities you have. If needed robust design, and weight does not matter much, then you need to focus on a metal or wooden chaise lounge with a wooden seat. The easiest way to make such a seat is from pallets - there is a ready-made assembly of boards on the frame, but the boards themselves are of poor quality and will require a long processing time after assembly - sanding, painting. Making a sun lounger from bent steel pipes requires skills in handling welding machine. The finished structure will be very strong, but heavy. If, on the contrary, you need an extremely lightweight structure that takes up little space, then think about a chaise lounge made from the frame of an old folding bed.

But the easiest option to make is the usual wooden chaise longue with a fabric seat.

Future chaise lounge - drawing and description

We settled on simple wooden structure: bars connected by bolts with nuts and washers. The strength of this chaise lounge is given by three slats in the back, which also allow the chair to transform. The seat is made of durable awning fabric and is fixed on two round bars.

Tools and materials

We will need tools:

• saw;
• drill;
• wood file and sandpaper.

Metal fittings and other small items:

• bolts and nuts - 4 pieces;
• washers (for the bolt head and nut) - 8 pieces;
• wood glue;
• screws;
• reinforced thread for a sewing machine.

Compositions for preparing wood:

• impregnation against rotting and moisture;
• primer (drying oil or other);
• paint or stain.

Table: necessary parts for a sun lounger

You need to carefully choose the fabric for the seat; it should be hard and comfortable, and should not wear out quickly. The best option- awning fabric; but any other dense fabric will do - tarpaulin, denim, canvas. It's good if it's bright and not light. It's more elegant and practical.

Preparing for work

All bars must be sanded, starting with coarse-grained sandpaper and ending with the finest sandpaper. It is advisable to impregnate them with a special impregnation against rotting or water-repellent impregnation, then prime and paint or stain them. Then the chaise longue will serve you for many years in any conditions.

Assembling a sun lounger

1. You can start with the frame of the back of the lounge chair. A beam with a cross section of 2×6×61 centimeters will be the main load-bearing link, so we attach it especially carefully. We install crossbars at the back of the seat. With the help of a stop that changes its position, the tilt of the backrest changes. At the same time, these crossbars act as stiffening ribs. You don’t have to attach the planks, then in their place you need to make cutouts at 20, 25, 30 and 35 centimeters from the rear edge of the structure. Be sure to leave a centimeter gap between the two bars to secure the fabric seat.
2. According to the drawing, we drill the necessary holes: on the back - two, from the edges - 41 centimeters; on the seat from the top edge - 43 centimeters; on a beam to support the back - in the center.
3. Then we combine the back and seat. Checking the alignment of the holes. We connect them with bolts and nuts. Be sure to put washers between the wooden parts.
4. We connect the frame elements. We install the back support. A round block is inserted into the hole drilled for it using glue.
5. We fold a pre-cut rectangular piece of fabric in half and stitch it with reinforced thread with an indentation of one and a half centimeters from the edge. We turn the sewn part inside out and sew a drawstring for the round bar. We do the same on the other side. We push it between the planks and fix it with a wooden rod. With this solution, it will be easy to remove the fabric seat and wash it; at the same time, there is no risk of falling out of the chaise longue - the seat is firmly fixed.

   The fabric can be removed without much effort

The nuts have the ability to unwind, but they cannot be tightened tightly - otherwise the chaise lounge will not be able to easily unfold and fold. To avoid unwinding, you can add one more locknut; Or you can put the nuts on glue or paint, only then do not touch the structure for a while so that the glue or paint dries. But first you need to adjust the tightening of the nut so that the parts move freely relative to each other.

Here is another approximate drawing of a slightly different design - all parts, dimensions and connections are clearly visible here.

Further care

If you have prepared carefully wooden parts, That special care will not need. But over time, all the steps of sanding, impregnation, priming and painting should be repeated by removing the fabric seat. The removable seat can be removed when it rains and can be easily washed when dirty. You can also make it from washable fabric. For the winter, it is better to put the sun lounger indoors.

The simple process of making a chaise lounge with your own hands will please any craftsman with a wonderful end result. A variety of materials and fabrics will allow you to be creative and create original item. And when proper care The chaise longue will serve you for many years.

It’s quite easy to make a sun lounger or deck chair with your own hands. Such a homemade, simple garden accessory is not only functional, but will also become a real decoration. local area. These unique folding beds differ not only in size, but also in appearance.

Sun loungers and deck chairs for the garden: main types

Chaise longue is a popular folding lightweight chair for relaxing in a reclining position. Such beach structures are easily transformed. A simple wooden accessory can be an excellent option not only for the beach and outdoor pools, but quite often used as garden furniture , replacing a comfortable and practical chair with open verandas or terraces. There is both an adult and children's version a sun lounger made from solid wood, durable plastic, durable aluminum or synthetic fabric.

Depending on the design characteristics, There is the following conditional classification of such products:

• monolithic chairs, represented by components fixedly connected to each other, with high level strength and designed to withstand significant loads. The special feature is safety. The disadvantages include the inability to fold the structure and make changes to the angle of the backrest, which complicates the process of storage and transportation;
• monolithic chairs with special inserts, characterized by very high levels of decorativeness. They have additional fragments made of various materials, which can negatively affect the level of reliability and strength of such a structure;
• portable models, characterized by the presence of special mechanisms, make it easy and simple, without much hassle, to change the position of such a chair for relaxation. There is also an excellent opportunity to change the angle of inclination on the footrest and headrest. The folding model is very compact and suitable for transportation in a regular car.

Types of sun loungers (video)

Models with a metal base are extremely rarely made independently and are distinguished by the presence of aluminum or steel frames with fixed durable fabric panels. The advantages of such chairs include low weight and mobility., as well as a high degree of comfort during operation. Besides everything else, modern materials They are distinguished by a high level of resistance to various unfavorable external factors, as well as pollution that can be obtained during operation.

How to make a wooden sun lounger with your own hands: drawings and stages of work

Drawings and diagrams for manufacturing a wooden deck chair are presented in large quantities, but to carry out such a design yourself, you can also use simple step-by-step instructions.

Master class on making a Kentucky chair

A very original model is the Kentucky version, entirely assembled from wooden blocks. This chair can be folded and is very convenient to store. To make your own you will need to purchase:

• galvanized wire with a diameter of 0.4 cm;
• sixteen galvanized staples;
• hammer and wire cutters;
• fine-grained sandpaper;
• wooden blocks measuring 50x33 mm;
• antiseptic composition and wood varnish, as well as a brush.

It is not difficult to assemble the structure yourself. Holes are drilled in the bars with a diameter one and a half millimeters larger than the thickness of the wire used. If necessary, you can replace the staples and wire with galvanized studs, the edges of which are secured with nuts and washers.

A simple option for making your own wooden sun lounger

This option is easy to manufacture, but quite bulky and does not allow you to change the position of the backrest. Before you start making your own, you need to decide on the dimensions of the structure. The optimal length of a sunbed is considered to be two meters with a width of 0.6 m.

The main stages of making a wooden sun lounger model are as follows:

• manufacturing a frame base for a sun lounger from four sidewalls, a pair of which are two meters long, and two of which are 60 cm long;
• covering the outer part of the frame with sanded boards, 2.5 cm wide;
• fixing four legs on the long sidewalls with a distance of 80 mm from the edge of the structure using galvanized self-tapping screws;
• It is best to use stable legs for making lounger legs wooden blocks 100 mm long.

At the next stage, the grate is assembled, which represents the main part of the outdoor lounger. Using an electric wooden stove, you need to cut boards measuring 10x60 cm. All jagged and rough surfaces on wooden workpieces must be removed using fine sandpaper. The finished boards are fixed using galvanized screws onto the frame base of the sun lounger and with a gap of one and a half centimeters, which will allow you to obtain a comfortable and attractive product.

Models with a comfortable adjustable back are somewhat less common. In this case, the lattice should be divided into a pair of parts, one of which is used directly as a lounger, and the other part serves as a comfortable headboard. The two parts are installed on connecting boards, and standard lattice elements are used to fasten the lattice elements door hinges the required sizes. To fix the headboard in a certain position, it is used cross bar, which is installed on inner edge frame base of the structure. The headboard support post is attached to such a bar using galvanized self-tapping screws. The finished structure must be thoroughly sanded, and then the surface must be coated with drying oil-based compounds or special varnishes.

How to make a sun lounger from solid wood (video)

How to make a folding fabric chaise lounge with your own hands

One of the most convenient and easy to use self-production options are represented by a fabric seat on a frame base. This model is quite mobile and can be transported from place to place, as well as easily fold to an almost flat state. The following materials are used in production:

• furniture bolts and nuts D-8mm;
• two round wooden slats 65 cm long;
• two round wooden slats 50 cm long;
• rectangular slats 65 cm long with a cross section of 25x60 mm;
• a piece of durable and water-repellent fabric measuring 200 x 50 cm.

You will also need to purchase a round file and fine-grained sandpaper, as well as PVC glue. Experts recommend giving preference to slats made from wood species such as oak or birch. As a durable and reliable fabric, we use types that are maximally resistant to abrasion and characterized by increased strength indicators. Mattress teak, as well as tarpaulin, denim and camouflage fabric, and canvas have proven themselves to be the best.

Manufacturing technology of a folding fabric model:

• cutting slats to standard lengths and thoroughly grinding their surface sandpaper;
• holes are drilled at a distance of 0.7 and 0.4 m from the corners, after which they are polished with a round needle file;
• In order for the position of the backrest to change during operation, three or four cutouts must be made with a distance of 8.0 cm;
• With a sufficient distance from the two ends of the wooden slats, holes are drilled for arranging the seat;
• The end part of the round wooden slats is greased with PVA glue and installed in the drilled holes.

The assembly of the frame ends with the installation of a fabric seat. The seat is sewn after measuring the finished frame. The crossbars are wrapped around the cut edge and secured using standard furniture nails. Loop fastening of the fabric seat to the crossbars is also allowed.

Buying a ready-made sun lounger: characteristics of types and selection criteria

Today, a chaise longue is a very popular and in demand product, mainly as comfortable and beautiful garden furniture. All modern sun loungers or deck chairs are divided according to the material used in the manufacturing process. A significant number of models are made from reliable and high-quality plastic, but there are also products made from processed wood and modern metals. Various combined models are especially popular, in which the frame base is made of wood or steel pipes, and the seat is made of wood or fabrics. Some loungers have wicker parts based on artificial or natural fiber.

Factory products made from modern plastics of different colors are resistant to negative external influences, including ultraviolet radiation, precipitation and wind. Wooden factory products are characterized by surfaces that have undergone a three-stage treatment, represented by priming, subsequent painting and decorative finishing, which allows you to use such a lounge chair in conditions high humidity, open air.

All manufactured products are divided into folding and non-folding models. and also have a raised or lowered footboard and headboard. As a rule, the position of the backrest is changed using grooves located on the supporting frame. For example, the Lucca chaise longue from a German manufacturer is made of aluminum and modern textiles, and the position of the backrest can be adjusted without getting up from your seat by loosening the locking levers located in the access area.

In recent years, country property owners are increasingly giving preference to a comfortable and very original type of chaise lounge - the Duchesse Breeze. This modern model is a design represented by a very roomy and deep chair, with a comfortable attached stool, which can be placed next to the main part or secured by fastening. The lounger can be folding, transforming into comfortable armchair or a chair that is convenient for transportation. The most modern models They have a raised and lowered footboard, as well as a retractable sun screen, transformable armrests, and spacious compartments for storing various accessories.

How to make a sun lounger from a barrel (video)

Wooden sun loungers or sun loungers are not only very comfortable for summer holiday, but also, of course, can become a decoration for any backyard area. Despite the fact that the cost of such a product is quite affordable, in recent years, country property owners are increasingly making sun loungers themselves, which allows them to get a bright and stylish, very individual and durable design with minimal costs time and effort.

When arranging a place to relax near a private house, it is impossible to do without a sunbed. This is where the ability to make a comfortable lounge chair with your own hands will come in handy. It is a folding lounge chair on which you can sit in a reclining position.

Sun loungers come in metal, plastic and wood. Often these materials are combined with strong textile inserts, or complemented with light pads in the form of pillows and mattresses.

When you decide to make a chaise longue for your dacha with your own hands, choose wood as the material of manufacture. It's easy to use. A completely wooden lounger will be reliable, strong, and will serve you for a long time. Detailed description how you can make a sunbed with your own hands, diagrams, design drawings and photos will help you avoid problems at work.

Lounge chair for relaxing in the garden or by the pool

On such a chaise longue for a summer residence, it is convenient to sit in the shade of plants while reading a book or take a place in a sunny meadow to get a beautiful summer tan. Despite the fact that this is a very simple design, the lounger can be installed in three positions: completely horizontal or with two options for raising the backrest. Moreover, one of the simplest designs is used for lifting. But we know what simpler mechanism, the less susceptible it is to breakdowns.

Even an inexperienced craftsman can make such a chaise lounge with his own hands. It will have convenient parameters even for a tall adult: width – 60 cm, length – 215 cm.

Materials and tools

The material from which we will make the lounge chair will be pine beams and boards. Their dimensions, along with a list of tools and fasteners, are presented in the list:

• 3 bars 4000x100x50 mm;
• 4 boards 4000x80x25 mm;
• 2 studs for attaching the back to the frame;
• drill with drills;
• self-tapping screws;
• sandpaper;
• wood putty;
• paint (color of your choice);
• wood glue to strengthen fixed joints;
• roulette;
• square;
• marker;
• saw or power saw.

Description of work

Before starting work, carefully examine similar drawings to understand the logic of subsequent actions.

1. First of all, we assemble the frame from the timber. We take 2 parts of 2150 mm each and the same number of 500 mm each. We make connections using a drill using self-tapping screws. To increase reliability, pre-coat the joints with glue.
2. Let's start working with the stationary part of the surface. We cut a board with dimensions 4000x80x25 mm with a saw into 60 cm pieces. In total, 13 such parts need to be made.
3. Leaving centimeter gaps between the boards (60 cm long), we fasten them to the frame with self-tapping screws. We control the angle of connection of the planks at 90 degrees.
4. Let's start installing the legs of the chaise lounge. For greater stability, the legs in the seat area should be made double. For them, we take 4 bars 35 cm long. We glue them in pairs, then fasten them to the base with glue and self-tapping screws. Any excess adhesive should be wiped off immediately. This will help in the future to avoid problems with processing these areas of wood.
5. On the side of the headboard we also attach single bars-legs 35 cm long. Then we attach second bars to them, which are 20 cm shorter than the first ones. We fasten them so that the lower edge of the parts coincides (as shown in the figure).

1. Let's start creating the back of the chaise lounge. The frame of this part will be assembled from pine beams measuring 100x50 mm. Prepare 2 parts of 880 mm and 3 parts of 390 for the back frame.

The dimensions of the backrest base are chosen so that it can fit inside the main part of the chaise longue (with small gaps for free movement).

1. Back covering. If you want to give the product a more attractive look, attach the trim strips in the direction of the length of the frame. In this case, round the top edge of each board on both sides. Maintain a distance of 10 mm between the slats.
2. To secure the backrest to the frame so that it can move freely, you need to prepare the holes. Measure 70-80 mm from the edge of the last seat board. At the indicated distance, use a drill to make holes that pass through the frame of the backrest and chaise lounge. Place a pin in them on each side.
3. The mechanism for raising and fixing the moving part is based on placing bars in special recesses that will not allow the backrest to fall down. The first selections should be made on both sides of the main frame of the sun lounger, retreating 7-8 cm from the hairpin. The dimensions of the recess should be 10 cm wide and 5 cm deep. We make the second recesses at a distance of 20 cm from the first, 5 cm deep and 5 cm wide.

If you place the first support bar, 60 cm long, horizontally in the first recess, the back of the chaise lounge will lock into the “chair” position. The person sitting on the chair will be able to sit comfortably. To change the level of raising the backrest, you should move the first block onto the shortened legs, and insert the second support block (60 cm) vertically into the second recess. You can fully unfold the chaise longue by removing the second bar and lowering the backrest. In this case, the small frame will stand on the first block placed on the shortened component parts legs

1. Finally, start finishing the chaise lounge. Use putty to smooth out any uneven surfaces and hide the screws. After drying, sand the corners and surfaces with sandpaper so that there are no sharp parts, burrs or roughness. Cover wooden product stain, this will protect the material from harmful influences. Paint the lounge chair the color of your choice.

The garden chaise lounge for the dacha is ready. You can equip it with a picturesque corner of your garden plot and enjoy a pleasant holiday.

Compact sun lounger: comfort wherever you want

A folding chaise longue, of course, cannot be called a sun lounger; it is more like an armchair. But the product has a number of other advantages. The design is very simple, so making it yourself will not be difficult.

The chaise longue is light in weight and compact, so you can easily move it to a new place. And if you show diligence in your work and care when choosing materials, the product will serve you for a long time. personal plot dachas for more than one year.

What do you need to make a folding lounge chair?

Before starting work, prepare:

• For the back frame: 2 parts – 1219x38x19 mm, 1 – 610x38x19, 1 – 648x38x19, 1 – 610x64x19.
• For the seat frame: 2 parts – 1118x38x19 mm, 4 – 603x38x19, one – 565x38x19 mm, one – 565x64x19 mm.
• To support the back: 2 parts – 381x38x19 mm, wooden dowel with a diameter of 12 mm and a length of 648.
• 2 pieces thick fabric 1372x578 mm each.
• 2 wooden dowels with a diameter of 12 mm, length - 559.
• 4 bolts with nuts 50x6 mm.
• 12 washers.
• Screws 50x4 mm.
• Glue.

Work sequence

The joints must be additionally glued. After pressing the parts, immediately remove excess glue.

1. Consider in detail the drawings and diagrams with the dimensions of the chaise lounge. They will help you understand the principle of its folding.
2. Drill pilot holes, then countersink them for screws.
3. Assemble the frame for the back of the chaise lounge. Attach the bottom bar 50 mm from the bottom edge. Leave a distance of 10 mm between the 610x64x19 mm strip and the top piece to secure the fabric.

1. Assemble the upper part of the seat frame in the same way as the backrest. Attach the first bottom strip, 203 mm away from the bottom edge of the side strip. We fasten the next 3 boards with a gap of 13 mm from the previous one.
2. We connect the frames of the seat and backrest by tightening them with bolts and installing washers under the bolt heads. We also place washers between the frame posts.
3. We use bolts and washers to secure the support strips for the backrest.
4. We place the round dowel on the glue in the drilled hole of the planks without gaps.

1. It's time to make a fabric seat. We put 2 pieces of fabric together with the right sides inward, stitch them, retreating 60 mm from the edge. On one side we leave a section of about 100 mm unsewn.
2. We turn the workpiece inside out and sew the sides along the length.
3. We lay cavities (for wooden dowels) along the width on both sides and stitch them.
4. We thread the dowels through the long holes of the fabric.
5. After completing the finishing work with wooden base(sanding, coating with a protective agent, painting) put the seat in place.

A folding chaise lounge for your dacha is ready. Drawings and images helped create a practical, comfortable, lightweight chair for outdoor recreation.

Camping is a great way to relax. Some go to the village, others go to the country, where comfortable sun loungers await them, allowing them to forget about environment and take a little nap. Such attributes relieve tension from the spine and almost all muscles; you just have to choose the most comfortable option for yourself: a rocking chair, a regular folding chair or a lounger.

The easiest way is to buy it already ready-made chaise lounge, choosing it to suit the interior of the dacha or to suit your individual needs. But not everyone has the financial means to do this. A handmade model is more valuable and fully suits the taste of its owner.

Kinds

Making homemade sun loungers is not difficult. Before starting work, you need to choose the type of furniture you want to bring to life. There are several of them:

• Armchair. As a base, you can take elements from a crib or cot. Armrests are made upon request.
• Sun lounger. The creation process takes about four hours. The product can be made of plastic or wood, which is ideally sanded and varnished.
• Rocking chair. Its back is at an angle, so it is possible to lie down, relax, and take a nap. At the same time, it is important to make the bottom of the attribute strong so that it does not become loose when swinging.

In addition to the distribution of products by appearance, there are variations in the types of structures:

• Monolithic. When it is created, all elements are fastened together, so disassembly is impossible. This chaise lounge is strong and durable, but the backrest is not adjustable and the product as a whole does not fold. As a result, problems may arise with its transportation.
• Portable. The reliable and compact folding attribute has a special mechanism that allows you to easily adjust its position.
• Soldered with inserts. This practical product will decorate any interior thanks to its attractive appearance. But inserts made from other materials do not guarantee durability.

If the chaise lounge is made of durable materials, it can be supplemented with a blanket, pillows and other items for a comfortable rest.

Possible materials

When choosing the material for making a sun lounger, you need to take into account its location. This could be a summer cottage, a beach, a special place by the pool or even at home. The following options exist:

• Wooden. This design is durable, comfortable, environmentally friendly, and differs in shape and appearance. The only drawback is the heavy weight. To make it easier to carry the chaise lounge, wheels are attached to the legs.
• Plastic. The products are lightweight, inexpensive, and easy to care for. One of the negative aspects is its fragility.
• Fabric. The attributes are convenient and compact. The frame can be made of boards, metal, profile pipe.
• Made from rattan. Against the backdrop of nature, such sun loungers look incomparable. They are environmentally friendly, but expensive. If you have the skills to weave, it’s easy to make such an attribute for relaxation.
• Made from PVC. The same lounger with a fabric base, but the frame is based on PVC pipes.

Making a sun lounger yourself is not difficult; you need to correctly determine the dimensions of all the elements and spend several hours assembling them.

Manufacturing diagram of various options

Before you start making a recreational attribute, you need to draw its diagram. She plays important role, because it determines the dimensions of the elements for the product, their shape, quantity and other details. You can make such a scheme yourself, but not everyone can do it. Therefore, we will give an example of such a scheme. A high-quality chaise lounge (fabric) will be obtained according to this drawing with dimensions.

All that remains is to find the materials to create a lounger. There are also other drawing options different types sun loungers.

From a wooden lattice

This chaise lounge is quite durable, reliable, and its backrest is adjustable. For such a model you should take wood slabs from coniferous trees, as they are resistant to climate change. Here is a diagram with the indicated dimensions:

All work is carried out in stages:

• A frame is created from bars, it is fastened with metal corners.
• Boards are attached to the outside, and legs are attached to them.
• The slab is sawed using a jigsaw and a wooden lattice is made.
• The adjustable backrest is separated from the main part of the attribute and secured to it with a door hinge.
• A fastening strip is attached to the headboard area, and a stand is attached to it with screws.
• The finished product is sanded and varnished.

If the lounger will often move from one place to another in the future, it is better to attach wheels to its legs, because the weight of the attribute itself will be considerable.

Fabric on frame

Work on the frame occurs in the following order:

• A ready-made base is taken from a cot or crib. If this is not available, slats are taken required length or cut and polished.
• Holes are drilled in the main frame, the other is equipped with cutouts (4 pieces) to adjust the backrest tilt.
• Holes are made at both ends of the slats to install the seat.
• Circular cross members lubricated with glue and installed in the holes.

Now you should prepare the seat itself. To do this, you need to fold the base of the product and measure out a piece of fabric. It should sag to accommodate the owner comfortably. On sewing machine All edges are processed. Then the cloth is wrapped around the transverse round crossbar and nailed on both sides with small nails. The attribute is ready and you can enjoy your vacation.

From pallets

This is the easiest option for creating a sun lounger. This product is lightweight (easy to move around different places) and practical (you can put a mattress on it for more comfort). The work occurs in the following order:

• Pallets are dismantled, all the nails are pulled out.
• A frame is made from two even boards. They are laid edgewise and parallel to each other, and the rest are sawn in half and attached to the base. The result is a seat with two support legs behind.
• To create the front legs, a board from a pallet is sawn into two equal parts. Next, using bolts, they are screwed to the base of the seat and tightened with nuts and washers. A cross bar is necessary to strengthen the legs.
• The back is created from two boards, which are connected to the seat frame using bolts, nuts, and washers. This should be done under equal angle. After that on support boards The boards for the back are attached with screws. Behind it, a block is attached to the rear legs - this is necessary for the strength of the structure.

The final step is to sand the attribute with an emery sheet.

To prevent the boards from rotting, the product is varnished.

Made from polypropylene pipes

The design of such a chaise lounge is identical to the fabric one, only the wooden frame is replaced with polypropylene pipes. To create the product, you need 2-inch pipes, fittings in the form of the letters “g” and “t”, 8 and 6 pieces, respectively. The assembly process has several stages:

• First, a vertical bar is made. Take a T-shaped connector and use it to fasten 30 and 45 cm pipes. L-shaped fittings are put on the ends. The lower vertical is also fastened and the two sides are connected.
• Important point: the horizontal crossbar must be solid and have a length of 66 cm. It is mounted closer to the connection with the letter “T”, which must be directed towards the inside of the structure. The other side is two 30 cm pipes, fastened with a T-fitting. This tee must be rotated 45 degrees from the oblong side. The final result is a rectangle.
• For a rotating seat, a 5-centimeter pipe is inserted into the triple connecting element, which is secured with the same part. This will be the basis of the horizontal frame.
• The long sides of the horizontal frame are made in the same way as the vertical ones. For the crossbars, take a tube 30 cm long and another, consisting of 2 x 20 cm with a tee fitting. The result is a rectangular figure within the same figure.
• The seat will be between a short section horizontal section and oblong vertical. After adjusting the tilt level, a support is inserted at the back.

The frame is ready, which means it is now necessary fabric base. To do this, take a thick canvas and attach it to the base.

"Kentucky"

This leisure attribute has a number of advantages: compact, convenient, easy to fold, light weight, durable and reliable, and takes up little space when folded. In appearance it resembles a chair with high back. Unusual way the assembly looks original. To do this, you will need bars, galvanized wire (diameter 4 mm) and the same brackets for fixing the wire (16 pieces), wire cutters, and a hammer. The process goes like this:

• A protective coating is applied to the bars. But the parts must already be ready for assembly.
• Holes are made. However, they should be a couple of millimeters larger than the wire.
• The bars are assembled in an interesting way, which makes the whole design look creative. Here is the diagram:

At the end of the entire process, the chair carefully rises and unfolds. This folding product looks stylish and modern.

Original ideas

People with creative thinking do not always want to see on their territory simple sun loungers, so there are several original ideas creating models for recreation.

From birch logs

This design has unusual look, so you have to work hard. For such a lounger you need birch logs with a diameter of 75-120 mm. But you need to consider what larger diameter lump, the more the finished product will weigh. Before you start, you should stock up on the following tools:

• electric saw;
• drill;
• set of drills;
• self-tapping screws;
• staples.

A do-it-yourself chaise longue (drawings with dimensions will be provided in the article below) is quite simple to make. But before buying material, it is better to calculate the amount of wood in advance, and the fabric is selected more durable.

Previously, in times of shortage, they used ordinary tarpaulin and untreated dry boards for homemade furniture of this format.

It was possible to find a comfortable and well-thought-out sun lounger (aka chaise longue) only in relaxation areas. Nowadays everything is simpler, and creating comfortable garden sliding furniture for yourself and your family for almost free of charge is as easy as shelling pears.

Kinds

For the simplest reclining chair made of wood, aluminum or plastic, there are the following types or types:

1. Children's lounger.
2. Beach.
3. Dachny.
4. For a residential building or apartment.

The difference is always in the environment, and if at home you can put a compact extendable chair like a chaise lounge, then at the sea or by the pool there is always similar furniture that is resistant to moisture (salt).

But to make it simple, convenient and inexpensive, let’s consider a simple type of chaise lounge on two frames, with a crossbar and a fabric back. This is a portable type of furniture for relaxation, so everyone can assemble identical sliding chairs for the whole family.

Self-production

Where to begin? Well, of course, in terms of size. The more it is manufactured, the stronger the sun loungers will be.

Drawings and dimensions

And you will need to assemble two frames of this format for one chaise longue:

Which will result in a simple design:

Let's start like this:

1. Choose pine board or timber. If it is not possible to bring/order, then we are looking for birch pallets. Now it's easier to get one quality material. Any type of wood must be treated. Moreover, we plan, sand and paint before assembling into one whole. A second layer of paint or varnish can be applied at the end.
2. Next, we look at the drawing and notice that there are power elements. These are cross members that necessarily cut into the frame. And for such a procedure a hammer, chisel or carpentry power tool was created ( manual frezer, let's say). Here it is important to do what was always done in stools of the Soviet period: tongue-and-groove fastening up to half the thickness of the frame block. And everything will fall into place. It won't be easy to unwind.
3. The power crossbars on the frame are the same boards, but we attach decorative or regular tarpaulin to them. Synthetic fabric will also work. But we make sure that it does not stretch, otherwise the butts will eventually sink into the ground.
4. So, two frames and two supports on movable hinges are ready. We assemble the structure together using bolted connections or special movable fasteners (the store will always help you with the choice).
5. Collected. There is some fabric left. But it needs to be cut out. More on this later.

For simplicity, we give the dimensions for the drawings.

1. Back. Frame. 1219x38x19 mm, two pieces. 610x38x19 mm one piece. 648x38x19mm is one joke. 610x64x19 mm one piece.
2. Seat. Frame. 1118x38x19 mm 2 units. 603x38x19 mm 4 units. 565x38x19 mm one unit. 565x64x19 mm one unit.
3. Back support. 381x38x19 two pieces. And a wooden dowel longer than 650 mm in the amount of 1 piece.

Materials and tools

To make a strong, correct seat, look at the following drawing:

You need to fold the cut piece of thick fabric and sew the indents. But you can make a two-layer coating without saving. To do this, fold the measured segment inward with the right sides and stitch along the sides. But in the center (similar to a pillowcase) we leave space so that you can carefully turn the seat inside out. front side. Then you can simply secure the longitudinal seams with another stitch.

But you need loops or pockets to connect everything into one. So we measure in advance the required size of the pockets on the wooden frame, then we fold our rag and stitch it. It is important to measure so that there is a middle state between too tight and sagging.

When working with fabric and wood, we need to take:

1. Plane.
2. Hacksaw.
3. Fasteners.
4. Hammer.
5. Chisel.
6. Sewing machine.
7. Measuring tool.
8. Paints and varnishes for adding shine.

Be careful with the fasteners. Since iron or steel is susceptible to moisture, it is necessary to protect them with paint. He also recommends using quick-drying adhesives in those joints where there will be play. But under no circumstances do we apply adhesive to the threads, because disassembling the structure later will be problematic.

How to use and care

To keep things simple, you can do this:

Then the frame can be made monolithic, and the bright seat fabrics can be easily machine washed. Another plus: you can make several pockets for different weights and heights. The result will be a universal design that even a student can customize.

Decor

There is more than enough room for imagination. This is what happens without haste, savings and hackwork:

And if you take four more bars and movable fasteners (clamps, bolts, etc.), then you will get a sun canopy. What is always appropriate in good weather:

By replacing the fabric with boards, we get the simplest bench-chaise lounge in terms of labor costs. The idea is not new, but accessible:

When you don’t have time for cutting and sewing, you can again make a lattice base, and buy additional bedding from IKEA for this space:

Although the collapsible design does not look so expensive, it has a significant advantage - mobility. And you can fully relax if you add portable footrests to the same frame. And you don’t have to invent anything for this:

Prefabricated or stationary sun loungers are simplest form country furniture. There was never anything complicated in their design. But when working on leisure furniture, as in any business, you need to adhere to an independent or read-out plan.

How to make a sun lounger for the garden with your own hands, see the instructions in the following video: