How to make a stand for a decorative plate with your own hands. Original do-it-yourself plate stand Mounted with a paper clip, wire and hairpin

If you meticulously select every item for your home, then you pay a lot of attention to even the smallest details. These stylish coasters hot with your own hands will fit perfectly into your modern interior. After all, today it is extremely fashionable to use natural and natural materials. This is exactly what real twine and cork are.

Making stylish coasters is not difficult.

Before work, in addition to twine and cork material, you need to prepare a knife and hot glue.

You can use old cork mouse pads as a base.

So, draw a circle on the base material and cut it out. Make a small notch to hide the end of the rope.

Starting from the edge, glue the twine in a spiral until you reach the center.

Such coasters can be relatively small in size for glasses and cups. Or maybe larger ones - for plates, and maybe even pots and pans.

Make at least six identical coasters. When guests come to you, use them to set the table, it should turn out very interesting and creative.

If desired, the twine is already in finished product can be painted in any color that best suits your interior.

However, the special charm of this kind of crafts lies in the unprocessed nature of natural materials.

The decision is yours - be creative!

After finishing the renovation and arranging the furniture, there is always a need to add wall accessories to the interior. Most often you want to close a void on the wall in the kitchen or living room. One way is to decorate with decorative plates. They can add zest to any setting. Especially if you decorate plates for walls or stands with your own hands.

Large bright plates on the wall will perfectly complement the interior

You can hang several decorative plates in the bedroom

Even simple white plates will decorate your design

Creating a unique decor for the kitchen or dining room with your own hands is not only a way to save money, but also an opportunity to get designer items exactly in style and color scheme general furnishings of the room. There are many techniques that can be used to accomplish creative work.

1. Decoupage with napkins, photos, fabric.
2. Quilling.
3. Stained glass covering.
4. Decoration with satin ribbons.
5. Artistic painting.

Plates can be placed anywhere and however you want

You can write words in English on the plates

Decoupage

Decoupage is one of the most interesting ways decorating plates. For decoration, you can use special napkins, magazine clippings, photos and even fabric, with which you can really create original draperies. For work you will need the following materials:

• PVA glue;
• scissors;
• brushes;
• acrylic paints;
• water container (for example, a deep dish);
• a ring from a tin can, if the product will be hung on the wall;
• acrylic lacquer;
• napkins for decoupage (or other selected material);
• plate.

It is not necessary to decorate the plates; simply hanging them on the wall can decorate the interior

Decorative plates on the wall will perfectly complement the interior of the room

A wall completely decorated with decorative plates will look very unusual.

After all the materials and tools are prepared, you can begin decorating the plate using the decoupage technique. The main stages of work are shown in the table:

If necessary, you can acrylic paints Use a thin brush to draw some details of the drawing. This way the result will look much brighter. This is done after the base layer has dried before coating with varnish. For wall mounting, in addition to the described method, you can use various hooks or loops.

You can use plates of different sizes in the interior

Plates of different colors will look very nice

Quilling

Quilling is a technique based on twisting thin strips of paper. The method is relatively new and very exciting. So, to create a unique dish you will need:

• plate (it is better to use a plastic or foam product);
• a set of quilling paper (sold in craft supply stores, you can buy a set of the most suitable color scheme);
• tools for twisting paper ribbons (sometimes come complete with strips), they can be replaced with an awl;
• toothpicks;
• ruler;
• a simple pencil;
• PVA glue;
• image.

Designing a product using the quilling technique includes several stages:

1. You need to divide the decorative plate into 4 equal parts, marking its center. You also need to use a pencil to mark the location of the drawing.
2. Making curls from paper. Using ribbons, you can create entire compositions of flowers, birds, and various patterns. Each element is coated with glue using a toothpick and attached to the plate.

Don’t be afraid to come up with new elements and compositions from paper ribbons. The main thing is to choose the right one color scheme, which will fit perfectly into the interior of the kitchen or dining room. Also, do not forget about hooks for attaching plates to the wall.

Painting plates in Japanese style

The plates can be decorated as you like

Decorative plates against a white wall look very beautiful

Stained glass covering

Stained glass always looks stylish on any piece of furniture. To decorate in this way, you can choose a transparent glass plate so that the stained glass effect is noticeable.

For decoration you will need:

• glass plate;
• stained glass or acrylic paints;
• circuit;
• you can use various beads if desired;
• degreaser;
• brushes

Before you begin decorating a piece with stained glass, the plate must be thoroughly washed and degreased so that the paint adheres and dries evenly. After this, you can outline the contours of the image with a pencil, or you can start working with paints without them if you want to improvise.

You can make a collage like this out of plates, and place a plate with a clock in the middle

Decorative plate with painting

First of all, a contour is applied to the plate and dried for several hours (the exact time for each type of paint is indicated on the packaging). Dry in a well-ventilated area. It is recommended to apply it in two layers so that the line is convex. Then you can paint the colored areas.

If you want to add additional decorations, it is recommended to do this when the paint begins to dry. You need to lay out the elements with tweezers and lightly press them into the layer. All actions must be clear and accurate so as not to spoil general form products.

You can decorate the plate with artificial flowers

Example of using decorative plates on the wall

You can use plates to create a collage on the wall

Decoration with satin ribbons

Satin ribbons are increasingly being used for interior decoration. And, of course, with their help you can quickly and originally decorate plates. First of all, it is worth considering how to create decorative elements from the atlas:

1. Weaving different ways from several ribbons. The result is a strip required length with pattern.
2. Sewing. It is carried out using thread and needle. A whole composition in the form of a panel is assembled from different pieces.
3. Kanzashi - flowers made of satin ribbons.

The elements necessary for decoration are simply attached to the product with glue. Most of the time is spent on preparing parts of the overall composition.

Decorative plates for the kitchen will perfectly complement the interior

You can decorate the plates yourself

Artistic painting

Painting plates is quite complicated, but exciting activity. Any drawn plot is allowed, it all depends on the overall interior of the house. Landscapes, ornaments, fairy-tale or mythical scenes, flower arrangements, animals and birds, Gzhel or Khokhloma paintings look great on decorative plates.

For decoration you will need:

• white plate;
• degreaser;
• pencil;
• acrylic paints;
• brushes

First, the plate is washed and wiped with a degreaser. Then the drawing is drawn with a pencil, after which they begin to paint the product. When the paints are dry, you can varnish them.

Don't be upset if the artist's talent is completely absent. In this case, a stencil can always come to the rescue. The drawing with it will turn out no less beautiful. You can purchase it at construction stores or places that sell craft supplies.

Instead of paintings, you can hang decorative plates on the wall

In the kitchen, decorative plates will perfectly complement the interior

An example of the use of decorative plates in the interior

Using plates in decoration

When choosing a method for creating decorative plates, first of all you need to remember general style interior and color scheme. You can place them on a table, chest of drawers, or mantelpiece. In such cases, you will still need to find or make a special stand yourself. Or you can actually hang the products on the wall. Let's look at a few classic schemes:

1. In a row. This way you can highlight a certain area in the interior. For example, above a fireplace or sofa.
2. Symmetry. In such a case, the plates should be placed exactly in relation to the pieces of furniture and at the same distance from each other.
3. Geometry. This way you can fill the void on the wall in an original way by hanging dishes in the shape of a square, diamond, or triangle.
4. Wave. To implement this method, you will need to mark a curved line on the surface of the wall and hang plates along it. It would be better if they were of different sizes.
5. Arch. This type of decor placement is ideal for the area around round mirrors or just above pieces of furniture, for example, in the bedroom above the bed.
6. Patterns. A more complex method is to create some kind of ornament or pattern from decorative plates. In this case, it is recommended to use objects of various shapes and sizes. You can, for example, decorate an unnecessary set of dishes using any of the proposed techniques and hang it on the wall in the kitchen.
7. Arrangement by size - from smaller to larger diameter or vice versa. In this case, it is very important that all the plates in the interior are the same shape.
8. Plot. This method is suitable if the dishes have a certain storyline. Then they should be located nearby.
9. Arbitrary arrangement of decorative plates on the wall. This method gives a lot of possibilities to the imagination.

A plate with a flower pattern will look very beautiful

You can depict anything on the plates

When choosing a method for arranging decorative items, you must follow a few simple rules:

1. Completeness of the composition.
2. Symmetry in the interior.
3. Compliance with color and shape.
4. Accounting for the sizes of decorative plates.

Plates of any shape will look most advantageous on the wall in the kitchen or living room. The main thing is to choose the right color and style. Exclusive decor will always delight you with its beauty.

Video: How to creatively decorate walls with decorative plates

Any housewife wants to arrange her kitchen to her liking. But the kitchen will look cozier and more modern if it is complemented with creative accessories. We are used to the dish stand looking very simple - metal structure. Here are some interesting ideas for decorating a stylish kitchen.

Pencils to work

To create such a holder you will need a wooden tray, leftover pencils and a drill. You need to adjust all the pencils to the same size; this idea will appeal to those who draw a lot or draw real drawings by hand. IN wooden tray Holes are made evenly, after which pencils are inserted into them. It is advisable that the pencils sit tightly in the holes; you can use glue for a more thorough fixation.

Stand made of wooden hangers

You need to prepare seven hangers. The metal loops are removed with pliers, and the hangers themselves are attached with screws. such a design can be placed in country house or at the dacha. Guests will definitely appreciate the creative plate stand you made yourself.

Dish stand "home"

To make such a stand for plates you will need imagination and design skills. First from wood plywood a low house is being made. Don’t forget about windows and doors, such details turn ordinary things into designer ones. Next, you need to make a roof from slats. The stand looks like a house not covered with roofing material.

The plate stand is convenient if you don't have a very large plate. dinner table. You can place two plates on it and place another one under the stand.

Necessary materials:

• Wire thickness 3 mm and 1 mm
• Round nose pliers
• Wire cutters
• Long nose pliers

Take two pieces of wire 3mm thick and 55 cm long. Bend both pieces in a semicircle.

Connect both sections and wrap them in the center with 1 mm thick wire. The length of the wrapped area is about 5 cm

Bend the ends of the segments into a spiral

Cut two pieces of wire 13 cm each and bend them into an S shape, with the ends twisted into a spiral, as in the picture.

Attach the S-shaped elements symmetrically to the sides of the future stand. Secure by wrapping with 1mm thick wire.

Cut four pieces of 3 mm thick wire 25 cm long. Using pliers, make several turns of wire around the legs of the stand and secure well so that the wire does not slide down.

Secure the wire in the same way on the other side of the stand. Make sure that the distance between the right and left legs is 18 cm. Cut off the excess wire.

If you have a couple of free evenings, why not start making crafts for the kitchen and home? After all, with your own hands from improvised, natural and even waste materials you can create a bunch of useful or simply beautiful little things. In this material we presented 50 inspiring photos and 12 super ideas with step-by-step master classes for the production of decorative items, storage accessories, kitchen utensils and more.

Idea 1. Tablet stand made from a cutting board

Watching your favorite TV series on your tablet or peeking at a recipe book while cooking will become easier if you make a special stand for this from... an ordinary cutting board. Making this kitchen craft with your own hands will take no more than two hours, and it will be used every day.

To make a holder for a recipe book or tablet you will need:

• You can use an old cutting board or buy a new one (wood is best, but bamboo will work). Its size should not be much larger or smaller than the tablet.
• A small wooden plank, or better yet, a piece of molding (this is what will hold the tablet/book).

• Another block of wood or plywood from which you can cut a sharp triangle;
• Paint or stain in the desired color, for example, to match the countertop, facades or kitchen apron ;
• Paint brush or staining rag;
• Jigsaw or saw;
• Wood glue or any other strong adhesive.

Instructions:

1. Using a saw or jigsaw, shorten your strip or molding to the right size(according to the width of the board), sand the edges sandpaper, then simply glue at the bottom of the board.

1. Cut a support for a stand from a piece of wood in the form acute triangle with a right angle as in the photo below and glue it too.

The angle of inclination of the holder will depend on the inclination of the hypotenuse of the triangular bar

1. Paint the entire piece following the paint manufacturer's instructions and leave to dry.

1. If desired, the handle of the resulting stand can be decorated with jute rope or ribbon. This way, when the stand is not needed, you can hang it on a hook.

Also, the craft can be further decorated - for example, by artificially aging it as in this master class, by drawing inscriptions, by burning a design, or by covering it with slate paint. In the following selection of photos you can get ideas for decorating original cutting boards.

Idea 2. Jute coasters

If your kitchen (or, for example, a country or summer kitchen) is decorated in a rustic, Mediterranean, rustic or marine style, then you will probably like this kitchen craft idea. In just a couple of hours you can make coasters for plates for the whole family and guests with your own hands.

To make one substrate with a diameter of 33 cm you will need:

• 10 meters of jute rope 1 cm thick (sold in construction and hardware stores);
• Hot glue gun;
• Scissors.

Instructions:

Just start rolling the rope in a circle, applying glue to small sections one by one and fixing them for a while. Once the mat is formed, cut the end of the rope and glue it down.

Idea 3. Organizer for cutlery and kitchen utensils made from cans

Tin cans cost nothing, but they are durable, easy to clean, and their shape is just right for storing all kinds of spatulas, ladle, forks, spoons and other utensils. If you put in a little effort and creativity, you can make a convenient and cute organizer out of them, which, even if it doesn’t fit into the interior of a city kitchen, will definitely fit in at the dacha. You can also use an organizer made with your own hands from cans to store tools, brushes, felt-tip pens and other small items.

Stand for spoons and forks made from cans

To make such a stand for spoons and forks, you will need:

• 4 or 6 clean and dried cans, without lids or burrs;
• Acrylic paint for metal or enamel paint (it will protect the cans from rust);
• Several wood screws and a screwdriver;
• Thick nail and hammer;
• Furniture handle or leather strap with fittings;
• A small wooden plank.

Instructions:

1. Paint the jars inside and out and let them dry for one day.
2. If necessary, saw the wood to the desired size, sand it, clean it and finally paint it (not necessarily to match the cans).
3. Take a nail and a hammer and make a hole for the screw in all the cans.

Tip: To make this process easier and not damage the paint layer, place a small block on the table using a clamp, then wrap the block in felt and only then put a jar on the block (see the picture in the lower left corner in the next photo collage)

1. Place the cans against the board and align them the way they will be mounted later. Mark the location of the holes on the board with a pencil.
2. Make small holes in the board where the marks were marked, using a hammer and nail.

1. Screw a screw into the hole of the first can to attach it to the board. Repeat the procedure with all remaining jars.
2. Finally, install on the end wooden board furniture handle or leather strap using the same self-tapping screws. Ready!

Here are a few other deco ideas and modifications to the design of cutlery stands made from cans.

Idea 4. Topiary for kitchen or home decor

Topiary is a small decorative tree that decorates a dining room or coffee table, chest of drawers or mantelpiece. And topiary is an excellent addition to a gift, especially if you decorate its crown, say, with candies or flowers. Making such a craft with your own hands does not take much time, does not require the use of expensive materials, and even beginners can do it. Once you master the basic principle, you will be able to create topiary for any occasion, any shape and design. Take a look at our selection of DIY home decor photo ideas, you're sure to find something you'll like!

Kitchen Decor Idea for Halloween

To make this craft you will need:

• Base made of polystyrene foam, plastic or floral foam in the shape of a ball or other desired shape;
• A trunk (a straight tree branch, a pencil or any other small stick);
• Decorative elements for creating a crown: coffee beans, artificial flowers, pine cones, colored beans, etc.;
• Decor to disguise the pot filler, for example, moss, pebbles or sisal fiber;
• Flower pot;
• Filler for a pot that will fix the trunk. For example, it will do cement mortar, still the same polystyrene foam or alabaster (the best option);
• Thermal glue in a gun;
• If necessary, you will need paint to decorate the trunk, base or pot. The trunk can also be decorated with ribbon or twine.

Basic instructions:

1. To begin with, it is advisable to paint the base in the color of the crown elements so that possible bald spots are not noticeable. You can also paint the trunk and pot and leave them to dry.
2. Cut a hole at the base of the crown, a couple of centimeters deep, for the trunk, fill it with glue and secure the trunk.
3. Take the base of the crown and start gluing the decorative parts one by one. The principle of action at this stage is simple: first, large parts are glued, then medium-sized and, finally, small elements fill in the bald spots. You need to glue the decor quickly, before the glue is absorbed into the base.
4. Dilute the mixture to fix the trunk in the pot according to the manufacturer's instructions and fill the pot with it, not reaching a couple of centimeters to the edge. Next, insert the barrel, hold it for a while and then leave it to dry for a day.
5. Disguise the filling of the pot with a decorative “cover” (you can fix it with a little glue).

Idea 5. Serving board-tray

But the idea of ​​​​an unusual serving board-tray, which, although not a cutting board (intended for displaying food only in dishes), can nevertheless be very functional. For example, it can be used to beautifully serve snacks, drinks (olives, pistachios, nuts, chips, etc.), sauces, honey, sour cream, jam. Thanks to the slate part, while the board is not being used for its intended purpose, it can simply be hung on the wall and used for writing.

To make this DIY kitchen craft you will need:

• Wooden board 5 cm thick;
• Stain of the desired color (for example, to match the countertop);
• Sponge, rag or brush;
• Chalkboard paint;
• Two furniture handles and wood screws for fastening them;
• Jigsaw or saw;
• Screwdriver or screwdriver;
• Ruler, pencil.

Instructions:

1. Cut your board to the desired size using a hand/power saw or jigsaw. In this master class, the board is 60 cm long, but you can make it shorter or longer.
2. Stain your board according to the manufacturer's instructions and let dry.

1. It's time to paint inner part. To do this, first apply masking tape along the edges of the board to limit the painting area. Next, apply slate paint (in this case, you use paint in a can) and let it dry.

1. Screw the handles to the edges of the board.

You can replace furniture handles with leather straps, paint the board a bright color, burn a design onto it, or attach it to back side two "legs".

Idea 6. Stand for mugs and glasses

If you're the type of person who collects wine corks (either for fun or in the hopes of one day making something useful out of them), then you'll love this craft idea.

To make one mug stand you will need:

• 8 corks (accordingly, to make a set of 4 stands you will need 32 corks);
• A roll of cork board, mat or coaster (for cutting out the base of the coasters);
• Hot glue;
• Leg-split.

Step 1: Lay out your corks in pairs in a square format as shown in the photo below. Using hot glue, apply a bead of glue between the two corks and press them together for 30 seconds. Repeat the procedure with all other pairs.

Step 2. Cut a square from sheet cork (board, rug) corresponding to the size of the future stand. Next, apply thermal glue on it, wait 15-20 seconds. and glue your blanks.

Step 3: Fill the gaps between the corks with glue and let it dry. For better adhesion of the glue to the corks, you can put some kind of press on the workpiece.

Step 4. Wrap the craft with twine and tie a knot.

Handmade coasters for mugs, glasses and glasses can be beautifully packaged and given to a friend

If desired, the stands can be made round, triangular or hexagonal by cutting off the excess with a knife.

Using the described principle, you can make such a hot stand with your own hands. By the way, an old CD will work as a basis in this case.

Idea 7. Wall panel

Another craft idea for the home and kitchen that you can make with your own hands from wine corks— a wall panel for decorating the interior and storing notes, memorable photos and postcards.

Framed cork panel from Ikea

To work, you will only need a beautiful frame (from a picture or a mirror), paint of the desired color, hot glue and a large pile of corks. Corks can be laid out in a herringbone pattern, in a checkerboard pattern, in even rows, and in other ways that you like. If necessary, for example, if there are not enough corks, they can be cut lengthwise or crosswise. To make the corks easier to cut, you need to soak them in hot water for 10 minutes.

Other interesting ideas manufacturing wall panels with your own hands.

Idea 8. Universal knife holder

Knife holder - very useful device for the kitchen, which helps to maintain working space in order to maintain the sharpness of knife blades longer.

Making a knife holder with your own hands is very easy - just pick up a small vase and fill it tightly with bamboo/wooden skewers, colored beans or... colored spaghetti, as in our master class.

To make a knife stand, prepare:

• A container or vase is the height of the blade of your largest knife. The shape of the container can be any, but without any bends;
• Spaghetti, lots and lots of spaghetti;
• Several large ziplock bags (or just large bags that can be tightly tied in a knot);
• Alcohol (for example, vodka);
• Liquid food coloring in the desired color (or several colors if you want to make a multi-color filling);
• Baking trays;
• Aluminum foil or old oilcloth tablecloth;
• Paper towels;
• Kitchen scissors.

Instructions:

1. Make sure your container is clean and dry, then fill it tightly with spaghetti. When the container is full, remove the spaghetti and add a couple more bunches of pasta to the pile as a reserve (in case you make up for broken sticks).
2. Divide the spaghetti evenly between the bags and pour enough alcohol into the bags to wet all the sticks. Next, add 10-40 drops of food coloring to each bag.

1. Seal or tie your bags, then place them in additional bags to avoid leaks. Slowly shake and turn the bags to mix the coloring into the alcohol and pasta. Next, place the bag on one side and leave for 30 minutes, then turn the bag over again and leave it for another half hour. Continue soaking the spaghetti in this manner (no more than 3 hours) until it reaches the desired shade.
2. Cover your baking sheet aluminum foil, then layer paper towels(or oilcloth). To protect your hands from staining, it is advisable to wear gloves. Remove the spaghetti from the bags, after draining all the liquid, place them on a baking sheet in a single layer and leave to dry. From time to time, the spaghetti needs to be sorted to dry evenly.

1. Once your spaghetti is COMPLETELY dry, start placing it in the container.
2. Shake the filled container and smooth out the spaghetti. Insert your knives to determine the optimal filling density, adding pasta or removing excess if necessary.
3. Now, using kitchen scissors or other very sharp scissors, trim the spaghetti to the desired length without removing it from the container (it's best to do this over the sink). It is important that the spaghetti does not exceed the height of the container by more than 2-3 cm, otherwise it will break quickly.

Idea 9. Jars for storing spices and bulk products

Today we will talk about an express technique for making a paper basket that can be used to store small items (keys, stationery), yarn, as well as for unusual presentation of fruits, Easter eggs, bread or pastries for festive table or as a gift.

Even a child can weave such baskets quickly and easily

You will need:

• About 15 sheets of thin A3 paper, cut in half lengthwise (this can be printer paper, a full sheet of newspaper, or even baking paper);
• A container of suitable size with straight sides (for example, a jam jar);
• Glue in stick;
• One skewer;
• Spray paint (optional).

Instructions:

1. Starting at one corner, begin to roll the sheet of paper tightly around the skewer to the diagonally opposite corner to create an even and long tube. Once the tube is ready, add a few dabs of glue to the corner of the paper to hold it in place and remove the skewer. Do the same with all the remaining sheets. In this master class, 30 tubes were required to weave 2 baskets.
2. If necessary (for example, if you used newspaper sheets) or if desired, paint the tubes with acrylic paint.
3. Take an even number of tubes and connect them together as shown in the photo in the upper left corner. In this master class, for a basket the size of a jam jar, 6 tubes were required, for a larger basket - 8 tubes.

1. Start braiding: Take one of the outer tubes (which is under the grate) and lay it over the adjacent tube, then pass it under the next tube, then run the tube again over the next tube, etc. Continue weaving by lifting the already entwined tubes vertically (from now on we will call these tubes stands).
2. When 2-3 cm remains from the first working tube, increase its length. To do this, apply glue to the new tube and insert it into the remaining “tail”. Continue weaving over and over again, adding paper tubes as needed.
3. Once you have weaved a base of the desired diameter (the same size as the container), place the container on it and begin weaving around it, pulling the stand tubes close to the walls.
4. Having weaved the basket to the end, remove the jar and carefully wrap the end of the working tube into the weave.
5. Tuck the ends of the posts inside the weave and trim if necessary. Next, you can spray paint from a can as in our master class.

Idea 11. Wall holder for towels and kitchen utensils

From an ordinary grater you can make such a convenient and beautiful holder for a towel and storage of kitchen utensils or even live or artificial plants.

From a flat grater you can make your own kitchen decor in a country, Provence or shabby chic style

To make a heated towel rail and a tray for small items you will need:

• A grater (preferably an old one, but a regular new grater will do, as long as it is metal);
• Patina for metal (for artificial aging of the grater);
• Small cutting board or just a wooden board;
• Wooden die (for the bottom of the grater);
• Glue.

Instructions:

1. Following the manufacturer's instructions, cover the grater with a metal patina, for example, green as in this master class.

1. Install a wooden bottom in the inside. It must first be cut to the size of the upper part of the grater. As a rule, at the top of the grater there are protrusions from metal handles; it is on them that the bottom will be attached.
2. Screw the grater to the board using self-tapping screws, after making holes in it with a nail and hammer.
3. Place the board on the wall near the sink, hang a towel on the handle, and put your spatulas, ladles or flowers inside.

Idea 12. Flower vase

Glass bottles for wine, milk or other drinks are almost ready-made vases that are just waiting to be painted with acrylic paints and/or trimmed.