Console table without legs. MDF furniture. Console table with your own hands. Making a durable and massive do-it-yourself console table

The console table is a shallow structure with shelves and drawers or without them. Similar furnishings to
In particular, it is intended for spacious rooms, but you can also find a place for it in small rooms. In the study on such a stand you can place souvenirs, in the bathroom - cosmetics, in the hall - decorative elements, in the bedroom - use as a dressing table. They can also look different, for example, they can be decorated with mosaics, painted or made of stone. They install consoles near the wall, they are ideal for zoning rooms. This article will describe how to make a console table with your own hands.

Making a durable and massive do-it-yourself console table

A do-it-yourself console table is carried out in several stages after acquiring all the necessary materials, fasteners and tools. The process itself includes the following processes.

Leg manufacturing

Since our table is quite voluminous, it will need massive and large legs. It is better to purchase blanks in a hardware store.

Important! Of course, having a machine at home, you can make them yourself, but this will also require certain skills.

Board preparation:

To arrange the upper and lower parts of the table, take a board 3 m long, 20 cm wide, 10 cm thick.
Cut it into pieces with circular saw. You should have four boards for making a table 150 cm long.
You will also need four boards 145 cm long and 10 cm thick. We will install them vertically on ready-made boards.
Four squares are needed along the edges so that their sides are 10 cm.

Connection of table parts

Take two square blanks 10 cm wide and 10 cm long, lay a board 145 cm long on top of their ends, screw them into the end with two screws. Repeat this manipulation again, make two more blanks to make the upper and lower parts of the structure.

Screwing legs:

Place three legs on a board 150 cm long and 10 cm thick, measuring the points of their location.
Screw them at these marked points.
Close the holes with wooden plugs so that as a result you get an element that can stand on its own two feet.

Upper shaping:

Step back from the edge of 2.5 cm, lay the resulting workpiece on top of the board and generously grease with wood glue on both sides.
Place another board on top of it.
Screw the end blank from below near the extreme legs on the right and left with screws.

Making the bottom

Repeat the procedure above with the bottom of the planks to end up with a table ready to be painted. Better clean it up sandpaper.

Processing of the finished structure

Paint the table in the way that suits you best.

As a result of the work done, you will get a durable, original, stylish do-it-yourself console table. The master class given in this section will allow you to do everything clearly and without the help of professionals.

What are balusters and their varieties?

We previously looked at how to make a cantilever structure using store-bought prefabricated legs, but it might look more attractive if you make the legs yourself. Next, we will consider in detail how to make table legs from a baluster. But first, let's figure out what it is. Why from a baluster?

The fact is that these carved columns have a very original shape, thanks to which they were previously quite widely used in architecture by the ancient Romans and Greeks. Modern architecture does not require the presence of such decorations, but, nevertheless, balusters are often used to equip stairs, balconies and furniture. By themselves, they are functional due to unusual shape. Depending on the given parameter, balusters are divided into three types:

In the form of bodies of revolution. Outwardly, they resemble a regular cylinder or a flowerpot of arbitrary shape. They are made on lathes, thanks to which each pillar has a finished look. This form is considered the most popular.
Slotted. They are made from boards, so they are mainly used in attics, that is, technical stairs. Decorate them with through curly holes.
Sculptural. Such balusters have a more complex arbitrary shape, in fact, therefore they are made exclusively by hand or using a machine with a large number of axes.

Important! Today they are produced from the most different materials- it can be stone, concrete, wood, polymer compositions.

How to make a console for the hallway with balusters with your own hands?

Now we will learn how to make a table with legs from balusters with our own hands. The most important thing is that you can use an old regular table for this. Or just take an old countertop and get beautiful legs from balusters.

Important! This is a great opportunity to save money and get a new, high-quality, original decor element. Such furniture is ideal for narrow hallways. Do you have little space in the hallway, do you love miniature gizmos, do you like classic style? Then you will definitely like this idea.

For work you will need:

Rectangular table or countertop.
Two baluster legs.
A piece of fabric 30 cm, 1.2 m wide.
Aerosol adhesive for fabrics.
Jigsaw.
Screwdriver.
Scissors.
Pencil.
Roulette.
Self-tapping screws.
Sandpaper.
Metal corner.
Masking tape.

Such a console table is made with your own hands without legs or with them according to the following scheme:

If you use a table for work, then cut it lengthwise into two parts. Use a pencil and tape measure for marking. Sand the edges with sandpaper to avoid scratches.
Fasten the legs of the balusters to the base on both sides.
WITH reverse side attach metal corners to our tabletop so that one is clearly in the center, the other two are at the edges.
Cover the edges of the table with masking tape. Prepare a piece of fabric, spray glue on the surface of the table.
Place a cloth on the countertop, while making sure that bubbles do not form. Trim the remaining fabric around the edges.
After the glue dries, remove the tape.
Attach the free part of our mounting bracket to the wall so that there are no gaps between the console and the wall.

Making furniture with your own hands is very exciting. From ordinary wooden planks and bars you can make a lot of interesting things for the house, from a bed to a stool. Having understood this issue, you can do anything with your own hands: folding, garden or chest of drawers. Manufacturing wooden furniture do-it-yourself has a number of advantages over a banal purchase in a store:

firstly, such furniture will fit into your interior as harmoniously as possible;
secondly, it is an opportunity to make an exclusive thing on your own unique drawings do-it-yourself wooden furniture;
and thirdly, you will be able to practice carpentry(for lovers).

Master class on making a console table

Prepare plywood 1 cm wide - we will make a table out of it. ends plywood sheet it is best to immediately paste over with a narrow strip of self-adhesive, ironing it with a heavy flat object (an old iron is ideal for this).
Sand the plywood board carefully so that its surface is perfectly even and smooth to the touch.
At the joints of the boards, drill holes for the screws with a drill.
Tighten them by hand or using a screwdriver. Your table will consist of three wide boards plywood in the form of the letter "P", while for greater stability, two narrow boards are screwed to each of them. From the edge of each large board you need to retreat 2-3 cm for better docking.
On the sides of the tabletop, it is necessary to glue a narrow rail, which will hide the joints. Use regular wood glue or pva. Also prepare metal corners and self-tapping screws, fix them on the underside of the future tabletop.
After lubricating the joints with glue, attach the table top to the bottom support of the table. Corner both sides at a 90° angle (important!).
Now let's take a look at the legs of the table. For greater ease of use, we attach rollers to them.
We drill a hole according to the shape of the roller and fix it with the bolts that usually come with the kit. Try to keep them on the same level.
The final stage of work on the table is varnishing. Use a foam roller for this.

The female class has always devoted a lot of time to the process of setting up a “marafet”. The attributes of this sacrament were also appropriate - magnificent boudoirs, furnished with massive wooden dressing tables with huge mirrors, were considered the holy of holies, where ladies of previous eras spent most of his life, preening and tormented by the eternal question: “Am I the most beautiful in the world?”. Today, the fair sex is in permanent time trouble, when it’s not only possible to spend half a day in front of a mirror, but even five minutes for makeup is sometimes not possible. It is logical that such a lifestyle left its mark on the "ladies'" furniture: bulky dressing tables were transformed into small dressing tables, which are absolutely not difficult to make with your own hands, even from solid wood.

Especially if you choose the configuration and dimensions of furniture that require a minimum of material, financial investments and labor costs. If we are talking about something “sort of” - a dressing table with radial surfaces, sophisticated decor and carved legs, then not all home craftsmen will be able to handle it: here professional cabinetmakers are always ready to help you.

The modern interior cannot boast of elegant and beautiful items. Today, most often, laconic and functional furniture is selected for him.

But it was not always so. In the times of kings and castles, each object in the room was distinguished by its originality and ornate elements.

It was in those days that the classic in our understanding of the console table appeared.

Of course, its analogue was used before, but in the 17th century, King Louis XIV of France introduced the fashion for baroque console tables, which can be seen in the paintings of many artists of that time.

And although we associate console tables with something old, they can look quite modern and take their place in an apartment or house.

Article content

console table in a modern interior

There were few uses for a console table in its heyday. Most often, he served as a beautiful stand for expensive and exclusive things. It can still be used for the same purpose today.

In this case, a small console table is placed against the wall in the living room and not only supports beautiful accessories, but also serves as a spectacular addition to them.

In addition, if earlier a console table consisted only of a tabletop and legs, then in a modern version such a table can be supplemented with drawers or open shelves.

Therefore, the options for using this piece of furniture has become much larger.

Organically looks console table, located behind the back of the sofa, located in the middle of the room. It can be used as a bar counter or place indoor flowers there in beautiful pots.

The installation of a console table in the hallway has become traditional. IN this room such a table is complemented by a mirror or soft puffs.

Also, in addition to the console table in the hallway, you can hang a hanger or put a basket for umbrellas.

This option looks especially relevant for small hallways.

The console can also be found in the bedroom, where it is used as a dressing table. Complemented with a mirror and a matching chair, this small table will bring an element of femininity to the interior.

If you are puzzling over how to arrange an office in a room that is used for a completely different purpose, then a console table can also help here.

By supplementing it with drawers, you will get, though small, but a separate comfortable workplace where you can sit at the computer or do needlework. In the same capacity, the console table can also be placed on the loggia.

In small kitchens, a console table can replace dinner table.

There are models that are easily laid out, increasing in size at times. And if, when folded, it can easily accommodate a couple of people to have a bite to eat, then in full-size form, large groups of guests can be received at such a table.

Console models depending on functionality

There is a huge variety of design models of the console table. So it can be a table with carved legs in the Baroque style.

Instead of classic legs, a figured base in the form of an animal can also be used. They can be mobile or wall mounted.

Laconic console table with drawers located under the tabletop, it is convenient to use even as a small desk.

And if you put the console on wheels, then it can not only be easily moved from place to place, but also used in the living room as a coffee table.

But there are also console tables - transformers. So a small console table from a coffee table can, unfolding, turn into a fairly large dining table.

Modern console table can be made from a variety of materials - wood, stone or plastic - which allows you to fit it into any interior.

And the choice of consoles with carved legs or straight lines ensures that you can pick up given subject furniture in any style.

Photo of a console table in the interior

The manager's desk is more than just a work…

A do-it-yourself table is an amazing variety ...

Orthopedic chair - photo tips for choosing ...

DIY dressing table: sizes and drawings

Before you start making a dressing table with your own hands, you need to think it over dimensions, based on the space of the room where the future furniture will be located, and develop drawings. The height of the dressing table is standard and is 750 mm, but you can experiment with the length and depth. A dressing table with dimensions of 800x400 mm or 1000x500 mm will definitely look advantageous - the proportions are good both from an aesthetic point of view and for installing a considerable number of shelves and drawers.

In addition, a tabletop with the above dimensions is convenient and roomy: on its surface, you can freely put a couple of dozen more beauty accessories that did not fit in hidden storage areas.

As for the configuration, the makeup table can be: freestanding, side or console. A stand-alone table has a rigid structure of a tabletop and supports - sidewalls or 4 legs. The attached version is assembled from a tabletop and two racks that partially carry the load: such furniture is additionally attached to the wall plane. The console dressing table is hung on the wall with a hinged mounting plate or rests on decorative brackets. Of all the listed types of design, the most budgetary and rational for small rooms is console furniture: it does not take up a significant area, and not so much material will be used to create it.

DIY dressing table: detailing and assembly

DIY dressing table with cantilever design - best option. However, despite its attractiveness, due to its small capacity, many people prefer to make the traditional one separately. standing furniture.

The most elementary frame for a free-standing dressing table with dimensions of 1000x500 mm is assembled from five parts:

35 mm thick worktop, the edges of which need to be processed manual router;
two sidewalls 20 mm thick with approximate dimensions 720x440 mm;
the front bar, which performs the functions of the tsargi;
back wall.

All the above dimensions of the table parts may vary depending on the thickness of the purchased material. There are several available ways assembling a dressing table with your own hands: for confirmations or dowels. The option with confirmations is simpler, but to mask the fasteners, you will have to use not very aesthetic plastic plugs. Assembly on dowels refers to professional methods, it requires the accuracy of manufacturing both the dowel itself and the mating part - the notch. The tabletop will be easiest to attach to the frame of the table using furniture corners.

We recommend ordering a mirror sheet in a glass workshop, having previously prepared a surface for it and accurately calculating its dimensions. You can attach the mirror to the wooden plane of the base with a special double-sided adhesive tape designed for glass, with liquid nails, or using professional mounting hardware. Get ready for some difficulties at the stage of “reunification” of the frame of the dressing table with the mirror: for this, metal or wooden planks are usually used, with the help of which the plate with the glued canvas is attracted with self-tapping screws to the back wall. Fasteners must be chosen so long that it does not pass through, damaging the front surface of the rear wall. When the basic design of the table is ready, they start assembling the boxes on all the same confirmations and attach guides under them.

A more simplified solution for organizing storage spaces in a dressing table is a built-in nightstand. It is always much easier to install shelves, screw on hinges and hang doors than fiddling with drawers that require careful fitting and laborious fastening of rails.

Selection of accessories in the manufacture of a dressing table with your own hands

An important touch that gives furniture completeness is fittings: handles, hinges, legs and various decorative elements. When choosing the "finishing chord" for the dressing table, as well as for any other furniture, it is necessary to strive to achieve harmony in form, style and color scheme. Laconic handles made of aluminum or of stainless steel- details for the design of the dressing table in modern style, and ornate elements in brass or "bronze" - for a product in a classic or rustic design.

The frame of the mirror is chosen in the same style as the fittings, although in the design of a modernist dressing table, the mirror sheet can simply be fixed to the hard surface of the wood board without any frills. The console dressing table will look original if you complement the straight-line design made by yourself with a frame for a mirror made of a patterned baguette.

Dressing table made of wood is not the most difficult joinery of all possible, quite doable with your own hands at home. If you don’t aim for something beyond the original, then even with minimal skills, such simple furniture is quite within the power of a “hands-on” craftsman. An exclusive wooden product with complex detailing and finishing is, of course, the parish of a specialized workshop. Here you can order a dressing table of any configuration, made in any style, including exclusive

model or stylized antique

Console table - support for expensive things

The heyday of console tables came during the reign of the Sun King Louis XIV, who lived in the 17th century. The 17th century entered the history of art as the age of the Baroque, which is characterized by a love for everything elegant and pretentious. It was at this time that the fashion appeared to decorate the interiors with various expensive figurines, vases, bowls, paintings and mirrors in heavy frames, tall candlesticks and others. decorative accessories. Louis XIV was known to the world not only as the king of France, but also as a noble collector of objects of exquisite artistic execution. However, having collected a truly huge collection of beautiful things, Louis XIV faced a problem - he could not find a worthy support for his collection.

At this time, small console tables made of wood were especially popular. Such tables were most often installed near the wall, and one or two curved legs served as a support for them. Despite the fact that the console tables themselves looked very elegant and stylish, Louis XIV felt that they were not luxurious enough to store his favorite accessories on them. And then he asked the court master to make several tables according to own project. According to the plan of Louis XIV, the legs of console tables began to be covered with gold, and in some tables, huge figurines of animals represented the support instead of legs.

Since then, for a long time, console tables in the interior have been a sign of luxury and belonging to the aristocracy. Now some tables from the collection of Louis XIV adorn museum rooms. However, they can be seen not only in museums. Since then, they have changed somewhat, but have not lost their elegance and perfection.

Console tables in modern interiors

If earlier this piece of furniture was extremely concise, in fact, it consisted only of a tabletop and legs, then a modern-style console table can be equipped with drawers, cabinets and additional open shelves. Since a modern console is made of any known materials - wood, plastic, glass, artificial or natural stone etc., it becomes a harmonious object in the interior of every room.

Traditionally, this type of table is used for arranging a hallway. By installing a console table in the hallway, you will get a great alternative to the usual furniture and the opportunity to free up space for other interior items. For example, depending on the material and design of the console, you can choose an elegant hanger, an umbrella basket, an ottoman or a stool for it. Some consoles for the hallway come with a mirror, which makes up a single ensemble with the table.

However, the territory of the console table should not be limited only to the hallway. It can also become a wonderful art object in the guest room if, using the example of Louis XIV, you store various figurines and interior accessories on it. The console looks very interesting in the interior of the living room, where the sofa is located in the middle of the room. By setting the table close to the sofa, you will get an additional area that can be used as a bar or flower shelf. Depending on the interior style of the living room, you can choose the most suitable and harmonious console. Eg, wooden crafts on graceful legs will perfectly complement classic styles, and a light transparent table will not burden the living room space in a minimalist style.

The console is also indispensable in the bedroom, because if it is equipped with drawers or shelves, it is convenient to use it as a dressing table. A white dressing console table will look especially stylish in the interior of the bedroom, which will immediately give this room the grace and mystery of a women's boudoir.

Also, the use of a console table will become great solution for registration working area in any room. Due to its compact size, the writing console will not take up much space, but it will be convenient not only to store the office, but also to work at the computer. If there is a catastrophic lack of space for organizing the working area, pay attention to modern console corner tables or transforming tables that can even fit on the loggia.

In addition, a transforming table of the type of console is ideal for small kitchen spaces. The design of such a table allows you to complement or expand its tabletop. As a result, the dining console in the kitchen occupies a minimum of space, but if necessary, it becomes so spacious that it can easily accommodate not only household members, but also guests.

Unusual console table functionality

In addition to design diversity, models of modern consoles differ from each other and design characteristics. For example, the legs of some consoles can be equipped with rolling casters, making such a product convenient to use as a breakfast table. Also, the console can be attached, that is, attached close to the wall with the help of special elements.

Despite the fact that the console table is, first of all, a display of designer beauty, it is also a fairly functional piece of furniture. By choosing the right model for your interior, you will be able to add additional features to it without much effort. bright accents.

Chest of drawers - the trend of the seasonFashionable design and space solution - podium bedLeather corner sofas- a worthy addition to a stylish home interiorChairs for the home - classification different types chairs Feng Shui furniture arrangement: the basis of comfort and health

Console types

A console table can be compared to a table that is cut lengthwise. As for the number of legs, they can be either all four, or one, or two. There are several types of consoles: free-standing console. It is a narrow table that can be placed against a wall, near a sofa, or even in the center of a room. Original models on rollers are offered by furniture manufacturers. This console table can even be used as a breakfast table. side console table. This model is very reminiscent of a table sawn in half and having only two (sometimes one) legs. Usually, the console is screwed to the wall or leaned against it. wall console. This model is a shelf with a decorative leg, "hanging" above the floor. The main difference between such a shelf and the usual one on brackets is a stylish oval or drop-shaped tabletop, decorated with carvings or overlays.

Console tables in solid walnut

Watch this video on YouTube

Table console-transformer

Furniture transformers will help to find a solution to the eternal problem of lack of space. Perhaps the most striking example of such a solution is a transforming console table. Their advantage is that they do not have to exist separately. If you want, put not one, but two or even three such tables near the wall, and they, like invisible ones (except for the trace from attaching to the wall), will help save space and at the same time they will look great in the interior! Do you have a very tiny kitchen, and there is not enough space even for a full-fledged dining table? No problem! Made of polymeric materials, tables-console transformers are easy to use and durable. If necessary, they can be easily disassembled, freeing up space, and reassembled if you are expecting guests or want to arrange a large family lunch or dinner. Just unscrew support leg and mounting bracket - done! A separate issue is the appointment of such tables. From here you can smoothly move on to the requirements for the material of manufacture, color scheme and designs. So, for example, two transforming console tables will look great in a high-tech interior, for example, with a modular kitchen furniture. On such a table, you can preserve fruits and vegetables, sculpt dumplings, and iron bed linen. If you put a special cover on the table top, it can be used as a cutting daughter and as decorative panel on the wall. You can, for example, attach a calendar or poster to it. At the same time, such a table can serve both as a dining table and as an addition to it. And for family tea parties, such a transforming table is completely necessary - in the kitchen or living room.

As you can see, the use of transformer console tables in the interior is quite functional. Made of precious wood, with side panels, one or two curved legs, inlaid on the lid, such a table will be appropriate in the interior of a bedroom, study, living room and at the same time will not cause any stylistic dissonance with its bright appearance. In summer, a transforming console table can be used as coffee table

in the interior of the living room or on glazed balcony. Do you want to place

Console table from an old chest of drawers

When the house appears old chest of drawers we usually throw it away. But creative owners have learned to give such furniture new life with a few not-so-complicated tricks. Moreover, they are so simple that even a novice master can cope with such a task.

And if you want to do such a thing yourself, then first you need to remove the drawers from the chest of drawers, and carefully process all surfaces with sandpaper.

With the help of furniture panels or ordinary plywood, we give the front of the drawers a more presentable look.

You can add regular wooden frames on top (for example, photo frames).

In this case, they must be connected with a strong adhesive. It would be ideal if, during the gluing process, the frames can be attached with furniture clamps.

With the help of a nailer, we attach the front parts of the boxes to their rest.

This is how the finished boxes will look in the future table.

At the same time, the upper drawers of the old chest of drawers must be thrown away, and instead of them, attach a piece of plywood or furniture panels using self-tapping screws and glue.

To give a presentable look, we paint the frame and the top of the table in White color(you can use a different shade).

We attach handles to the finished boxes.

This is how the console table should turn out in the end.

Console table made of drawers

Old chests of drawers are not the only material from which you can create stylish furniture. For this, the most common wooden boxes. A table made from such improvised means can successfully complement the interior of the living room and another room. In order to create it, you will need:

2 plywood boxes;
Boards for the manufacture of the frame;
Stable and strong board for the top;
Primer;
Drill and screwdriver;
screws;
Putty;
High quality wood glue
Circular;
Clips for furniture;
Dye.

To begin with, we sand the boxes well and cover them with paint.

Then, using a circular saw, cut necessary details and make a frame, as shown in the figure. We connect all the parts with screws and glue.

After the design has turned out to be quite stable, we fill in all the gaps and uneven places with putty.

We put the boxes on top of the prepared frame and glue them with glue and clips.

This is what the finished table looks like.

Also, from such boxes you can create a more simplified version.

There is no need to create a framework that is difficult for many. It is enough just to connect several boxes together.

Wooden console table with sliding doors

This version of the console looks very interesting, which can be created in different colors and stylistic solutions according to one drawing.

All it takes is:

2 boards 2.5 m long, 5x25 cm;
2 boards 2.5 m long, 2.5x25 cm;
A sheet of plywood 0.7 cm thick for the back wall of the console table;
3 boards 2.5 m long, 2.5x5 cm;
4 boards 2.5m long, 2.5x10 cm;
6 boards 2.5 m long, 2.5x7.6 cm;
2 thick panels for furniture (1.9 cm) or plywood - 91.5 cm x 45 cm;
Equipment for sliding doors;
Bolts 6*35;
wood glue;
Primer;
Dye;
Wood putty.
Tools;
Yardstick;
ruler-triangle;
Pencil;
Glasses for safety;
Noise protection earmuffs;
Drill;
Miter saw with laser line;
Portable table saw with stand;
Nailer.

The main nuances in the work:

Make sure the work area is free of debris and other contaminants.
Always measure the details after every step you take.
Before connecting the bolts, you must first drill holes in the tree.
Remove excess adhesive from areas that do not need to be glued. The remaining dried glue will not allow the paint to go well.
Be careful at work. Especially when it comes to circular, nailer, etc.

All dimensions shown are indicative only, and you can change them yourself, using the drawings as an example.

Blanks:

Framework

5x7.5x213 cm 4 pieces;

5x7.5x45 cm 4 pieces;

5x7.5x36 cm 4 pieces;

Parties

2 thick panels for furniture (1.9 cm) or plywood - 91.5 cmx45 cm

front frame

5 pieces. - 2.5x10x91cm;

8 pcs. - 2.5x10cm and 45cm.

Shelves

2 pcs. - 2.5x20 cm;

2 pcs. - 2.5x10x220 cm.

Medium shelf supports

5 pieces. - 2.5x5x36 cm;

5 pieces. - 2.5x5x45 cm;

Back wall

Plywood 0.7 x92 cm.

Bottom trim

1 PC. - 2.5x5x230 cm. Both ends must be cut at an angle of 45 degrees, at the longest measuring point.

2 pcs. - 2.5x5x47 cm. One end must be cut at an angle of 45 degrees at the longest measuring point.

Top finish

2 pcs. - 5x25x231 cm.

Doors fitted 51x76 cm.

Step 1

Make 2 frames out of 2 crossbars and 3 windows in the middle. All parts must be screwed, and the joints must be glued.

Step 2

Attach the side panels to the sides. They can either be screwed on with bolts, or you can use nails and glue.

Step 3

We make the front frame. We lay out all the measured pieces, as shown in the figure. (All designations are in inches). You will get 2 rectangles of 45 cm wide and 2 of 55 cm.

Step 4

We put boards on the bottom. One is 20 cm wide (closer to the front), the other is 25 cm. We nail everything and glue it well.

Step 5

For greater durability of the structure, it is necessary to nail small glazing beads on the lower boards on the reverse side with an interval of 55 cm.

Step 6

In exactly the same way as the bottom of the console, we create an internal shelf. We also nail the glazing beads at the bottom. Using self-tapping screws and glue, we attach it to the inside of the future table.

Step 8

We attach pieces of plywood to the back. It can be either a solid sheet or several connected finished furniture planks.

Step 9

We strengthen the lower part of the table with the help of appropriate thin strips attached around the entire perimeter.

Step 10

We fasten and glue the furniture panels to the top of the console. This should be done in such a way that the top is wider than the bottom. And the upper part itself should hang over the lower part.

Step 11

We install sliding doors.

Step 12

We cover all the necessary gaps with putty and hide the bumps. Let's dry.

Then, with sandpaper, rub the surface in the direction along the fibers.

We clean the surface, at the end we wipe it with a damp cloth.

We prime the surface. If necessary, paint.

From these examples, you can understand that absolutely any thing can be created with your own hands. The main thing is to put some effort into this and connect everything with a capable fantasy. And then the results obtained may surprise you.

Console tables

Console models are wall-mounted narrow tables. Looks like a bureau, but without the drawer extension. fit very well into narrow corridors or in the bedroom as a work table or dressing table.

Console tables differ from the usual ones in that they are fully or partially attached to the wall. This table is made complete with a mirror and is designed for the bedroom. But this is not the only place to place it. This option can be very appropriate in the hallway.

The console table takes up noticeably less space than usual, so using it in the limited space of a bedroom or hallway may be the best option.

You can make such a dressing table from a variety of materials, including chipboard, but this is of course in last resort. In this version, the table is made of solid pine.

Console table with two drawers, detail dimensions.

General dimensions of the table: Width 1000 mm. , depth 400 mm. , height 200 mm. .

Table top dimensions - Width 1000 mm. , depth 400 mm. , thickness 30 mm. All items in this bedroom set are made in a certain style, so
the thickness of the details of the tabletop, side walls and facades is made more than usual.

Sidewalls: Length of parts 400 mm. , width 170 mm. , thickness 30 mm. , two pieces.

Middle partition: Part length 370 mm. , width 160 mm. , thickness 30 mm. .

Table bottom: Width 960 mm. , depth 370 mm. , thickness 10-12 mm. . The bottom of the table is made of 10 mm furniture plywood. .

Drawers: Width 430 mm. , depth 350 mm. , height 130 mm. , two boxes. Cases of boxes can be made from planed boards 16-20 mm thick. , a bottom of boxes from plywood of 4 mm.

Drawer fronts: Width 453 mm. , height 170 mm. , thickness 30 mm. , two pieces. Edges 50 mm wide are cut along the upper and lower edges. and edge depth of 12 mm.

Table assembly.

1. We put the sidewalls flush, flush with the ends and the front edge of the tabletop. We fasten on furniture corners, I used bolted hard corners with metal fittings. All the same, the entire table hangs almost on the tabletop.

2. On the lower edges of the sidewalls, we pass a quarter of 10/10 mm with a manual milling cutter. to set the bottom. We make a quarter before reaching 30 mm. to the front ends of the sidewalls, align the angle with a chisel.

3. We mark the middle partition by sliding it inward by 30 mm. relative to the front edge of the tabletop. This is done because the drawers, when used, slide inside the table, flush with the sidewalls and the tabletop, we fasten it to the corners to the tabletop.

4. We insert the bottom into quarters on the sidewalls, and fasten it with self-tapping screws to the edges of the sidewalls and the middle partition. The bottom also slides inward by 30 mm. , and is aligned with the front end of the middle baffle. When closing, the drawers rest against the edge of the bottom and partitions with front slats.

5. We install the boxes on roller or telescopic guides, 350 mm long. We fasten the facades with self-tapping screws from the inside of the drawers, as well as drawers for bedside tables, the link is at the top of this article. You can hang the table on the wall using special canopies for heavy kitchen cabinets.

Mirror in the bedroom.

This table will be used as a dressing table, so a mirror for it is a must. Here the mirror is large enough, hung above the table on the wall.

The mirror is assembled in the form of a frame with the corners sawn into a "mustache", i.e. at an angle of 45 *.

General dimensions: Height 1100 mm. , width 1000 mm. , the thickness of the parts is 30 mm. , the width of the frame bars is 150 mm. . Facets 50 mm wide are made along the edges of the parts. , at an angle of 10-11 *.

When assembling, at the ends of the parts, I made sockets 10/10/150 mm with a manual milling cutter. for spikes. I glued the frame with long clamps. If there are none, then the frame can be wedged on the table, or in extreme cases, tighten the corners with long self-tapping screws from the side of the edges, immediately drown the hats and close them with wooden plugs.

From the inside, along the inner edges, a quarter for glass was also made with a manual milling cutter. The width of the quarter can be any, and try to make the depth according to the calculation of the thickness of the mirror + the thickness of the plywood. Plywood 3-4 mm. the mirror closes on the back. You can fix the mirror with ordinary mirror clips. Simply put, these are plastic or metal washers that are attracted by self-tapping screws.