DIY wood crafts video. DIY wood crafts - drawings and instructions for simple and beautiful homemade products (photos) Best-selling wood crafts

It is better to make wooden crafts with your own hands according to the drawing.

Most work is relaxation and benefit in one, because original crafts It's not that hard to do in a few hours.

How to work with the material

We may find it useful in our work:

Jigsaw;
Cutter or knife with a sharp blade;
Burner;
Sandpaper;
Paint and varnish compositions;
Glue.

For a simple craft, for example, a candlestick or a box, it is best to use soft wood. This is linden or aspen, and if you don’t have the necessary bars (boards) at hand, then plywood or a pine rough board will do.

Important requirements for wood: the material must be dried. It is advisable to choose those parts where there are no cracks, chips or knots.

Candlesticks are usually processed on lathes. All school-aged boys enjoyed this exciting activity, showing their imagination.

Ideas for beginners

So, let's start with the original, already presented candlestick ideas. And the easiest way to make these crafts is from plywood up to 5 mm thick:

The plan details the number of parts of the structure. And such a drawing can be used as a stencil.

It would be more correct to work like this:

Translate to plywood sheet or all trimmings necessary details in one copy. This is more convenient, because displaying 5-6 identical glasses is tedious.
Where you need to select the middle, we drill several holes. The easiest way to cut through them is with a hand or electric jigsaw.
Next, the cut parts need to be processed sandpaper along all contours, and it is advisable to go over the finish with a fine-grained cloth.
And at the end, even before assembly, apply several layers of simple oak stain. It is important to process all planes so that there are no light spots of plywood left.
We collect, light candles and rejoice. Everything will take a couple of hours, no more.

But with boxes everything is much more interesting, here you can already develop skills and really create real masterpieces:

But before work, it’s better to watch the wizard’s video:

Where the developments and tricks are described in detail. It is very useful to learn some points for gluing, convenient for further processing of the material.

We work according to the usual plan:

We draw out all the planes of the box according to the proposed drawing, or we simply use scraps or remnants of boards, again without cracks, knots or distortions.
Craftsmen who have created dozens of carved boxes recommend gluing all surfaces tightly (and even the lid), if there are carvings on the lid or sides. Why is this? Nothing fancy, it’s more convenient to handle not a flat board, but a strong box, rotating the workpiece as convenient.
On the assembled and glued parts of the box, be sure to mark the planned patterns, holes or legs with a pencil.
Next, each plane is carefully processed with a wood cutter. But never, even for one-time work, buy Chinese blade attachments. These tools at work will ruin your nerves and discourage any desire for creativity.
After processing the outer part, you can carefully cut off the glued cover. And then place it on hinges or homemade fasteners.
The inside of the boxes is usually decorated with pieces of velvet.
And finally, you can glue something more original onto the lid itself. For example, if this is a craft for a child, then even a forgotten Kinder Surprise toy will do.
Wood is always protected from scratches and drying out with varnish, and homemade boxes are no exception. But a thick layer will definitely cause smudges. Therefore, we dilute the varnish with a solvent and a small brush, slowly protect it and at the same time decorate it from all sides.

It is important to know: Such high-quality products are not a waste of time, because ordinary, not yet processed blanks are sold as decoupage.

And this is a job for experienced craftsmen - a do-it-yourself table made from boards, unprocessed branches or logs. There is room for imagination to unfold here, and there is plenty of material even in the cities. You can take dry poplar, hazel, rowan. Even a crooked wild apple tree or a wide layer from a very thick pine trunk will do. Everything at hand can be processed, collected and decorated.

For such a design, it is better to choose a part of the rhizome from a deciduous tree, but anything will do for the tabletop. It is important to be able to put together such a puzzle. The work will require tension bands, and you won’t be able to do it without a power tool (plane or jointer).

Finished work, performed by a home carpenter:

Already unnecessary, but intact industrial pallets will be very convenient for work. It is in them that best wood, already dried. The board will be without large knots, and it will be a pleasure to work with. Tips before you start:

We calculate required amount units of material and collect it with a reserve.
We measure the dimensions of such a table according to the place of use and the number of users.
It is not advisable to use hardened screws or nails as fasteners. It is better to take threaded types.
It is better to assemble the structure of a table and two benches into one, as shown above. So street homemade furniture will remain safe and sound.

When working with wood, process all planes of the boards. It is better to spend more time on preparations than to remove random small splinters from your palms.

Nowadays, doing such things means not only working with your hands, but also showing your imagination. Collective work in this regard will only be beneficial.

About others simple crafts made of wood, watch the following video:

And at our gate a miracle tree grows... And a tree is also found in every home in the form of furniture, doors, windows and other objects that make a person’s life easier. Our review will tell you about the most unusual use wood in interior design.

Wooden whale organizer. There are only pencils in his head, a mobile phone in his teeth, and his tail is trying to hold the notebooks.

The Slim Timber company decided to pamper lovers of environmentally friendly raw materials with a wallet made of wood. Despite the solid texture, the wallet looks organic and does its job perfectly.

This is not just a wooden sink, but the most spectacular model made of natural wood that exists.

Mario. Just Mario.

Glasses with wooden frames. They probably slip off the nose less. But these are just guesses.

Wooden chair from Millworks. Quite roomy and stylish.

Handmade calendar made of natural wood. There are only abacuses more antediluvian.

Wall hooks. Naturally, made of wood.

Wedding ring with wooden insert. It is strange that only part of the ring was treated with wood. Although everything is understandable. Can you imagine the face of a bride who, instead of the expected diamonds, saw a wooden ring in the hands of her beloved? And here is at least some amount of noble metal.

Wood coffee table. Everything is like in previous centuries. The only modern trend is a glass tabletop.

Ash bench. It will look great in the garden country house, and in the hallway of an ordinary apartment.

Wooden keyboard from Engrain.

Case for iPhone.

Not far from the case, the MP3 player made of wood has also gone. Looks unusual, sounds great.

It’s amazing how manufacturers dared to create a wooden shower, given the property of wood to get wet from moisture. However, eyewitnesses claim that wooden shower Terra Marique is not afraid of any water.

A canoe made of wood is quite common. Although in the 21st century it is increasingly rare to see such vehicle on the river.

Owning something is the dream of many craftsmen who want to earn decent money and know how to work with their hands. First of all, a novice entrepreneur needs to decide what exactly he wants to do: stone carving, making souvenir magnets or do-it-yourself wooden products. The last option is one of the most profitable today: wood is environmentally friendly and beautiful when proper processing a material that is in demand both among connoisseurs of “natural” jewelry and among those who are simply interested in everything unusual.

In addition, handmade wooden products: unlike bulky metal or stone ones, they are easy to ship and even pass customs control without any problems. It goes without saying that in order to organize production at home and subsequent sale, the master will have to purchase the appropriate equipment and deal with advertising issues. Let's try to figure out what you need to start and what kind of profit you can expect.

What can be made from wood for sale - photo

Despite the widespread opinion on the Global Network, it is best (at least at the beginning of business) to make from wood not large objects like furniture or doors, but relatively small ones: competition in this niche is much less, and the master has more opportunities to prove himself. In addition, making a wooden trinket is technically and physically easier, and even if it doesn’t work out, the entrepreneur can throw away the workpiece with peace of mind, without worrying about the ruined material and wasted time.

souvenirs: keychains, magnets (or frames for magnets), congratulatory inscriptions and even portraits;
decorative items: sculptures, carved paintings, frames for icons, netsuke (can also be used as keychains), copies of world architectural masterpieces (St. Basil's Cathedral, Eiffel Tower, Taj Mahal, and so on);
decorative dishes and household items: carved vases, jugs, candlesticks, stands for smoking sticks, boxes, rolling pins, cutting boards, cups, bowls, dishes, plates;
Board games: checkers, chess and backgammon with all sorts of variations, chips, dice and other necessary equipment;
jewelry: beads, carved and painted, bracelets, rings, hairpins and combs;
a variety of children's toys: blocks, cars, trains, dolls, construction sets and more - everything that comes to mind and is in demand on the market.

Advice: You shouldn’t refuse individual offers either - they by default bring more profit than products produced for sale with your own hands en masse.

If a craftsman who specializes in making wooden rings is asked to carve a door (and has the equipment to do so), why not agree? It may be that this work will become a new stage in his career - and if it does not succeed, the entrepreneur can always return to his old occupation.

Stages of building your business

Now, having firmly decided to sell wood products, you can begin to implement your plans. The first stage when starting your own business, if the master really wants to succeed, is. This document, thoughtful, calculated and well written, will help a novice entrepreneur attract investors or obtain a loan for the development of a project; After all, production equipment, as well as renting a room or workshop, costs a lot of money, and not everyone will have the required amount at their disposal.

Additionally, a business plan is a great way to organize entrepreneurial activity: only in this way, imagining what to do tomorrow, in a week and in a year, a businessman will be able to completely devote himself to his main work, without being distracted by minor organizational problems. It will not be possible to completely get rid of them, but the less these questions confuse the master, the easier it will be for him - and the greater the profit he can count on.

Advice: An entrepreneur can find a suitable organization for the production and sale of wooden objects on the Internet. If you want to create your own (unique and inimitable) project, it is better to involve an experienced specialist or consultant in the work: a well-drafted document is the key to the favor of creditors and investors and the successful start of the project.

Business registration

Surely the entrepreneur realizes that he will have to pay taxes. In some cases, it will be required, in others - income tax and other contributions to the budget; but you won’t be able to do without visiting the tax office.

Excluding shadow business practices, the master can choose between three options for relations with the Federal Tax Service:

do not register as an individual entrepreneur or legal entity, thus moving into the category of self-employed - laws regulating similar method making a profit has not yet been worked out, which means that the craftsman who chose him will face many surprises from the state;
register as an individual entrepreneur, and then pay taxes on income according to the general or one of the available simplified schemes;
registering a legal entity (company, limited liability company or even joint stock company) is a complex path that imposes many additional responsibilities and restrictions on the business owner, and therefore it is not worth choosing it, at least until there are serious reasons for it.

enter into contracts for the provision of services or sale of wood products with individuals, intermediaries (agents), small, medium and large businesses legally;
hire employees: auxiliary workers, apprentices, accountants, lawyers, marketers, and so on - right down to the driver and loader;
move from an inconvenient and, in most cases, unprofitable common system simplified taxation, for example “Income minus expenses”;
avoid bureaucratic obstacles: to register an individual entrepreneur, in particular, you do not need to create statutory documents or look for co-founders.

So, a craftsman who wants to make wooden products for sale with his own hands, acting as an individual entrepreneur, needs:

Come to the local branch of the Federal Tax Service with your passport and Taxpayer Identification Number (TIN) and submit the appropriate application on form P21001. Or, which is much more convenient, fill out an online form on the official website of the Federal Tax Service. On several pages of the electronic application, the applicant must indicate:
- your last name, first name and patronymic, if available;
- date and place of birth;
- residence (registration) address;
- contact details: cell or landline number and email address;
- information about the identity document: series, number, date of receipt, name and code of the unit that issued the passport (foreign passport, etc.);
- proposed types of activities according to the OKVED 2 classifier: main and (optional) several additional ones;
- other information requested by the system.
Based on the completed online questionnaire, the previously mentioned form P21001 is generated; at this stage, the applicant can print it out and come to the Federal Tax Service in person or continue remote registration - the latter is preferable, since there are only a couple of steps left until the end.
Pay the state fee, which in 2018 is 800 rubles. This can be done by printing out a receipt and going to the nearest bank branch or online - in the latter case, by logging in through State Services, the user will be able to save 30% of the specified amount.
After transferring money to the budget and submitting an online application, a novice entrepreneur must be patient: he will have to wait for a response from the Federal Tax Service within three to five business days from the date of submission of the application.

If the applicant complies with all conditions and requirements, the decision of the Federal Tax Service is usually positive; Now, upon receipt of the answer, the foreman should personally appear at the local tax office to receive a package of documents confirming registration and certifying his right to conduct commercial activities.

The next step, if you plan to organize a mass sale of handmade wood products, is to obtain a certificate from Rospotrebnadzor. In addition, an entrepreneur renting production room or a workshop, with some probability you will need to obtain permission from Gospozhnadzor, especially if they are open to customers.

All formalities will take an average of one to three months; In order not to waste time, a businessman can, in parallel with obtaining permits, look for personnel, form an assortment, or even open an online store: then the sale of products “on site” can be combined with remote sales.

Search for premises

The premises for a carpentry workshop, focused on the manufacture of the types of products listed above, must meet the following criteria:

Square. The larger the scale of production and the more workers the entrepreneur hires, the more space is needed; but even if the craftsman works alone, it is necessary to take into account the space for machines, workbenches, tables and other equipment, as well as the placement of raw materials and work space. Minimum recommended area - from 60 square meters; if a craftsman plans to produce only small, homogeneous wooden objects, such as rings, beads and rolling pins, he can make do with a room in an apartment - realizing that with the expansion of production, the issue of space will inevitably have to be resolved.
Ceiling height. It is important primarily in production facilities and workshops intended for the manufacture of large objects made of wood with your own hands or with the help of hired workers; if we are talking about decorative items, souvenirs or small kitchen utensils, as in the previous case, you can get by with an ordinary room in an apartment. A master working on cubes or miniature sculptures will need only one table and a few tools for his work - which means there is no point in renting large areas, spending a fair amount of investment and income on this.
Natural light. But this point is much more important. Working with wood, with its complex texture and the constant possibility of detecting defects, requires good lighting, ideally natural, the safest for the human eye. This does not mean that you can abandon the artificial; but without windows on the sunny side to achieve good results(and therefore organizing mass sales of wood products) is almost impossible.
Energy supply. Another important parameter, especially if the master plans to use machines: milling or belt, trimming or grinding. In most cases, such equipment is not only bulky (and therefore not suitable for placement in an apartment), but also requires power supply not at the standard 220, but at 380 volts. In principle, it is possible to equip one or two sockets with this voltage in an apartment, but coupled with an electric oven and washing machine they can create unnecessary load on the home network, which will eventually lead to a short circuit, if not a fire. However, there is a way out: a craftsman specializing in the manufacture of small wooden objects can purchase mini-machines, which are already present in sufficient quantities on the market. Not only are they lighter and easier to maintain, but they are also often designed for standard voltage, which completely eliminates the problem.
Ventilation. Wood processing is always associated with the release of chips of all fractions, from large to small, almost dust. Some of it remains in the air, negatively affecting health; To avoid consequences, it is recommended to install at least a hood in the room, or better yet, a full air conditioning system. A novice businessman has a choice while he works alone; With the hiring of employees, the installation of equipment necessary for normal operation becomes mandatory. Already when searching for premises, it is worth paying attention to the presence of a hood or the possibility of installing it: timely foresight will help to avoid difficulties in the future.
Price. This is both the most important and the most underestimated factor. In order not to overpay for the rent of a production facility or workshop, a businessman who does not intend to set up a store or kiosk nearby can rent space in a worse area and further from the center. If you plan to combine the production of souvenirs and household items with sales, you will have to look for a more fashionable place - and hope that the profit from sales will cover the rental costs.
Terms of employment. Before concluding a contract, it is highly recommended to check with the landlord on what conditions he agrees to rent out the industrial premises. Otherwise, it may be necessary to look for a new workshop a couple of months after renting - which, of course, cannot have a positive impact on labor productivity and, as a consequence, profits.

It is impossible to say which room is ideal for production: for some, one or two rooms in an apartment will be enough; someone will need an entire workshop with a room for storing wood. A master who already knows what he wants to make with his own hands from wood must independently choose for himself best option, guided by the given criteria.

Advice: optimal time lease - one year; subsequently, the contract can either be renegotiated or closed (instead of moving from place to place every few months).

Equipment purchase

Depending on the specialization, the master may need:

Wood sawing and cutting machines: band saw, circular saw, jointer and cross-cut saw. The first three varieties are usually used to work with the source material: unsawn boards and round timber. The latter is for cutting small workpieces; if in the manufacture of furniture or cabinets you need all the specified equipment, then for rings, beads, rolling pins or figurines it will be enough cross-cutting machine- you must purchase it in a full-size or portable version.
Wood processing machines: milling, surface planer, grinding, polishing and others. Without the first two (again, when making it yourself small items) it is quite possible to get by; Grinding wood, like polishing, is an integral stage of production, and therefore a novice entrepreneur will have to spend money on the last two machines, in whatever design. It is not necessary to purchase industrial models; For work at home, “desktop” versions of machines are sufficient - fortunately, there has been no shortage of them for a long time.
Tools for manual processing of wooden blanks: saws, hammers, chisels, mallets, planes and jigsaws (simple and electric), drills and screwdrivers, screwdrivers, tape measures and so on - there is no number of them, and all of them will be in demand to one degree or another. In addition, it is recommended to purchase a good square, protractor and plumb line - without these tools it will be impossible to obtain high-quality workpieces. Despite another common belief, it is not necessary to purchase only high-quality products from well-known manufacturers; Some of the tools, such as tape measures and screwdrivers, can be considered consumables and replaced as needed without overpaying for “branding”.
Brushes for working with substances for chemical treatment wood: anti-mold solutions, stain, white spirit, drying oils, varnishes, paints and so on.
Tables and workbenches for marking boards and plywood and directly working with wood with your own hands.

Now, having everything necessary for work, the master can move on to the next step - purchasing raw materials: different breeds wood, plywood, veneer and laminated boards.

Purchase of raw materials

Some tips for choosing wood and related materials:

Primary wood requires more time to prepare for production, but is cheaper. This includes: round timber, unprocessed branches, logs and other materials from which it is impossible to obtain a workpiece in one action.
Purchasing recycled wood allows you to save time and effort, and if the craftsman makes souvenirs and utensils at home, it is simply necessary: it will not be possible to install a sawing machine in an apartment without causing surprise and justified criticism from neighbors. Recycled wood is boards, timber, plywood, veneer and other materials - everything from which you can immediately start crafting.
For the manufacture of small carved items, including beads, rings, chess pieces and boxes, soft woods are best suited: cedar, spruce, pine, poplar, willow, alder, chestnut and linden. If it is expected that the item will be in active use, but not associated with serious mechanical stress, it is recommended to use medium-hard wood: birch, pear, beech, larch, apple, ash, elm or rowan. If an item made by a master must have special wear resistance, you should purchase expensive, but necessary for high-quality work, boxwood, dogwood, olive, acacia or hornbeam. In addition, it is strongly recommended to consult with the customer, and, if possible, demonstrate to him the texture of the wood used. The more forethought the master shows, the sooner the number of his clients will grow - and therefore, the greater the income will be.
The most important factors in wood selection are moisture content and the number of defects. Wood suitable for processing must be naturally dry: not damp, but not cracked from lack of water. And if it is possible to correct the high moisture content, then wood with cracks should be discarded immediately: it is guaranteed not to be used for work. Damp wood, if there is no mold or signs of rotting on it, can be dried in a gentle mode, and then treated with a solution against mold. The same applies to defects: it is almost impossible to find material without a single flaw, so the master should imagine in advance how he will cope with this or that problem. If there are too many defects, and it is impossible to disguise them during processing, the purchase must be abandoned: no matter how attractive the price is, the entrepreneur will lose more by trying to hide the defect or as a result of the customer’s refusal to pay for a low-quality product.
It is also important to take into account the structure of the tree: twisted, straight-layered or layered, as well as amorphous. The smoother the arrangement of the fibers, the easier it is to process the wood and the stronger the surface of the product will be; at the same time, the design of the craft will be, compared to other options, rather boring; Sometimes it makes sense to choose sophistication over simplicity and quality. Ideally, the master needs to have an agreement with several suppliers and samples of the material they offer, so that the buyer or customer can imagine in advance what awaits him at the end.
Price. For ordinary crafts made by hand, not to order, there is no need to purchase expensive wood; More accessible, “common” species like pine are sufficient - as practice shows, for the buyer, what is more important is not the design of the product, but the quality of processing. If the master plans to make souvenirs or household items to order, it is worth agreeing with the buyer on the nuances of the work, warning him to include in the check the costs of searching, purchasing and processing exclusive material.

Important: In some cases, cracks in treated wood, such as oak, are considered a sign of quality. On domestic market Such ideas are not yet widespread enough, so an entrepreneur who anticipates such problems should inform the customer in advance about possible deformations and obtain his consent to begin work.

Estimated expenses and income

It is impossible to accurately estimate the costs and income of a craftsman who makes do-it-yourself wooden souvenirs for sale. Russian prices for equipment and raw materials are constantly changing, and, as the master can see, not to the lesser extent; in addition, the final costs depend on the current and long-term needs of the businessman.

On average, to start a project you will have to spend:

for renting premises - 20–45 thousand rubles;
for the purchase of machines - 50–400 thousand rubles;
for the purchase of other equipment - 15–100 thousand rubles;
for the purchase of consumables and fasteners - 5–15 thousand rubles;
for the purchase of raw materials - 5–20 thousand rubles;
for other expenses - up to 50 thousand rubles.

It is equally impossible to predict what income an entrepreneur will receive in the first and subsequent months. It all depends on his efforts, the quality and variety of the goods offered, the purchasing power of the local population and other factors, the dynamics of a number of which are in Lately disappointing.

On average, working a full week, an entrepreneur will be able to earn from 30 to 100 thousand net profit per month- not so much, but not so little compared to other ways of making money on sales.

Where to look for sales channels for finished products?

To find buyers, an entrepreneur can:

, others in social networks and on specialized websites and forums;
place advertisements about the products offered in paper and electronic media, on advertising websites, as well as in the ticker of a local TV channel and on the radio;
with the most detailed catalog of wooden products, their descriptions, prices taking into account various promotions (we must not forget about marketing) and useful articles on the topic of the site;
take care of outdoor advertising: from simple announcements and handouts, including business cards and leaflets, to billboards and banners;
try to establish connections with stores and retail chains;
hire an agent (intermediary) who will search for clients and prepare business and accompanying documentation;
give a few made with my own hands trinkets and household items for friends, acquaintances and colleagues; those, having appreciated the quality of the products, will tell their friends about them, which will ultimately bring the entrepreneur additional clients.

There is no ready-made recipe for sales: a craftsman who makes wooden objects with his own hands needs to build a marketing policy on his own or, if this is too difficult, turn to a specialist for help.

What are the requirements for wooden products?

There are no special requirements for wooden items made individually or to order. They, like any other product, must be safe for the health of consumers, durable and aesthetically pleasing; all this is assumed by default.

In order to know what to focus on, the entrepreneur must familiarize himself with GOSTs for products similar to those manufactured by him, keeping in mind that these requirements are minimal; the more its products differ from the “normative” ones better side, the more successful he will become.

Let's sum it up

You can make wooden products with your own hands for sale either at home or by renting a production facility or workshop. The first step of a novice businessman is registration as an individual entrepreneur or legal entity. Then you should obtain permission from government authorities: Rospotrebnadzor, Gospozhnadzor and others.

Simultaneously with registration, an entrepreneur can begin to look for premises, purchase production equipment, Consumables and raw materials. You should not choose too expensive wood for “production” products; This should only be done in agreement with the customer. To establish sales, it is recommended to place ads on social networks, on specialized websites, as well as build relationships with points of sale and distribute information about the product through friends, relatives and acquaintances.

No matter how many new synthetic materials appear for construction and decoration, wood remains irreplaceable and loved at all times. Master carpenters continue to create their masterpieces from plastic and pliable wood. Today we will tell you what unexpected things you can make from wood with your own hands and provide a link to the drawings.

Wooden curtains

Venetian artist Livio De Marchi from common breeds The tree carves anything - from a hat to a car.

He makes his masterpieces in full size. Sometimes it is very difficult to distinguish his works from real things. The master stores his wooden collection in a special wooden house, inside of which everything is also made of wood, including dishes, tablecloths and curtains made from wood with your own hands.

How to make garden furniture

Even if you don't have the same amount of artistic talent, don't waste money on garden furniture, try to make it yourself. Sometimes it really is as simple as shelling pears and does not require any drawings or diagrams. Ordinary boards and bent metal legs – that’s your coffee table. For such projects, you can also take small bars that are laid in a checkerboard pattern.

Logs folded in a certain order - here you have chairs and a table.

Dry wood will make an original hanger. IN as a last resort, a log with “hooks” made from branches will also work. Remove the bark, treat with antiseptics, and paint it the color you want. When you're done with your project, remember to "plant" the tree on a sturdy stake with a heavy base.

DIY wooden interior

Here's wallpaper made from logs cut crosswise. Cut blanks from thick branches of dry trees. Attach them to the wall using liquid nails. Open with varnish. The original eco-decor is ready!

One craftsman decorated a chest of drawers with bark rings - it looks original and fabulous!

And this family of cabinets for a walk - both the decor is unusual, and will be suitable for storing all sorts of little things.

Don't throw away the legs old furniture, maybe someday you’ll make a new centipede coffee table out of them. Funny and original.

And these three multi-legged tables were created by Korean designer Chul An Kwak. The idea for two of them was inspired by galloping horses, and the third was a gift from a working excavator.

Two old chairs can “give birth” to a new bench. Place them opposite and cover them with boards so that the beautiful backs of the chairs serve as bench arms.

Designer items made of wood

And these designer chairs self made Skeleton Rocking Chairs, valued at $3,120 each, were sold at auction. Rocking chairs in the form of realistic skeletons, as they say, are not for everyone. Not everyone will relax in the arms of a bony handsome guy, except extreme sports fans and fans of horror films.

If you need an original wall shelf, capable of going around any corners, make it yourself! The cost of the project is six boards.

A wall mirror that turns into a folding table is very convenient thing in the house. And it’s quite possible to do it with your own hands. You will need two sheets of plywood 2 cm thick measuring 80 x 60, a mirror 60 x 40, metal hinges - 4 pcs., two hooks, acrylic varnish. We measure 10 cm from the edge along the perimeter of the plywood sheet. Drill holes in the corners with a drill. Using a jigsaw, we cut out the rectangle drawn on the plywood. So we made a leg for a folding table, which will also serve as a frame for the mirror.

Now cover the table top and table leg acrylic varnish. Attach the folding table leg to the tabletop using two metal hinges. Attach two more hinges with reverse side the other end of the tabletop so that the mirror can be hung on the wall. Down mirror surface Place the mirror exactly in the center of the tabletop. Apply double-sided construction tape around its perimeter. Turn the mirror over and place it on the tabletop according to the markings used with tape. Attach the hinges on the tabletop to the wall. The leg on the tabletop is fixed with two hooks.

Australian artist Cornish Adam came up with a hammock made from plywood. Hanging structure– these are 15 layers of birch plywood, between which there are rubber washers for shock absorption.

Unremarkable construction pallets, as it turns out, inspire craftsmen to endlessly fantasize about garden furniture.

Wooden utensils

To make a knife stand in the shape of a medieval knight, you don’t need expensive materials, nor do you need professional woodworking skills. Standard kit, 15mm birch plywood and patience is all you need. The figure of the knight consists of two identical sides and one middle part, which are fastened together with glue and wooden spikes with a diameter of 6 mm. The holes for the tenons are blind, 8 mm deep. To hold the knife sharpener, use a 25x5mm neodymium magnet. Cut a hole in the knight's helmet, glue a magnet into it, and a plywood plug on top.

The knight's shield is assembled from two identical parts, as well as the base of the stand. You need to make through rectangular holes in the shield for the knight’s arms, and in the base for his legs. Then, slots are cut in the shield for the specific knives you have in your kitchen. The finished stand can be varnished or painted with acrylic paints.

A real working wooden excavator will undoubtedly delight your children. The toy is 83 cm long and 68 cm wide and works on the principle of lever traction. The product consists of two parts - a support and a cabin with a bucket. The shovel bucket can be controlled by levers on a nylon rope. The base is a platform that rotates 360° around its axis. The counterweight log maintains the stability of the structure.

You can see even more original ones in this article. Read also how to use and decorate furniture. And this article will talk about manufacturing. Find out what our users are making and check out the drawings.