Heating a house with gas cylinders: the required fuel consumption. Gas heating in a private house: general principles of the device and many useful tips How to make heating in the country with bottled gas

Natural gas is currently the most optimal fuel for home heating. The only negative is that it is not always possible to connect the heating system to the main gas pipeline. In this case, you can pay attention to an alternative in the form of liquefied gas - boilers using bottled gas in our country are not uncommon.

Classification

Boilers operating on liquefied gas are single-circuit and double-circuit. A single-circuit boiler is intended only for heating, while a double-circuit boiler is capable of both heating the house and providing hot water in it.

Consumers are offered wall-mounted, with open and closed cells combustion. In addition, you should pay attention to the power of this heater. A variety of modifications often makes it difficult for the user to choose, so it is worth dwelling in more detail on the most important characteristics.

For boilers operating on liquefied gas, the ability to operate at low pressure is of fundamental importance.

The constant supply of bottled gas will be carried out at a pressure of 3-4 Mbar. Therefore, you should pay attention to this parameter.

efficiency

Efficiency is one of the most important parameters of a heating system. Liquefied gas is more expensive than trunk gas, and transportation costs must be added to its cost.

The efficiency of modern serviceable equipment can reach 90-95%. To calculate the gas consumption for heating, you need to know the total area of \u200b\u200bthe room: approximately 1 kW of power is consumed per 10 sq.m.

For heating and hot water country house 100 square meters will require about 2 cylinders per week and 8-9 cylinders per month. You can connect the cylinders in a group: according to the rules, the use of a system of cylinders up to 15 pcs is allowed. In this case, gas containers must be in a closed metal cabinet.

Mounting hardware

To install the heating system you will need:

burner for liquefied (balloon) gas and gas cylinders themselves;
shut-off valves and reducers.

Bottled gas burners differ in their configuration from conventional ones, and are usually included as standard with gas boilers. If necessary, they can be purchased separately. Shut-off valves and the necessary gearboxes can be purchased from the company or directly at cylinder filling stations.

Connection

A cylinder or a group of cylinders is connected to the boiler through a reducer with a throughput of about 2 m3 / hour. Reducers for domestic stoves are designed for lower throughput - they are not suitable for the heating system. The gas tank system can have one common reducer or a separate regulator for each cylinder. The second option is more expensive, but it is recommended by the masters - separate gearboxes provide maximum safety.

Cylinders of liquefied gas cannot be installed outdoors: the cold will provoke a decrease in pressure, and the heating pad may refuse to work. The ideal place for installation is a warm, ventilated room. It is important to remember that bottled gas is heavier than air, and in the event of a leak, it will accumulate at the bottom, increasing the likelihood of an explosion. Therefore, the room should be chosen separately from living rooms. It should not have basements and subfloors!

Gas cylinders are connected to the boiler burner using a metal corrugated pipe- this reduces the likelihood of gas leaks due to system vibrations.

With help automatic sensors and the right settings, you can reduce propane consumption rates by 3-4 times. If it's about country house, then the gas consumption will be even lower: for the period of absence of people, the automation will maintain the temperature at the level of 6-9 ° C, which will reduce the propane consumption to 0.7-0.8 cylinders per week. Heating a building with liquefied gas is not the cheapest option, but in some cases it is the most optimal if there is no problem with the delivery of cylinders.

The gas boiler perfectly performs its functions when connected to the main gas pipeline. In this case, it is quite easy to switch the equipment to a constant source of fuel supply - just change the burner.

But if there are no prospects for connecting the building to the gas pipeline, the feasibility should be recalculated. For a house with a total area of more than 100 m2 and maintaining a temperature of about 25 ° C, it is worth considering installing a solid fuel boiler or other heat generator and water heating.

Refueling

Cylinders undergo mandatory certification every 3 years - this is necessary for the user's own safety. Such containers can serve for about 10 years. standard house consumes about 10-12 cylinders per month, so they will have to be refueled weekly - it is impossible to transport more than 3 cylinders at a time without special permission.

Before refueling, the vessels must be prepared. To do this, you need to remove the condensate, which artificially reduces the usable volume and harms the steel walls. Removing condensate is the prerogative of specialists; doing such work with your own hands is always a risk. If for some reason it is difficult to find a master, then you will have to carry out the procedure yourself. The cylinder is taken out to an open space without sources of fire, grounded and then the gearbox is removed. Leave for 2 hours so that the remaining gas disappears. After two hours of inactivity, the vessel turns over, and the water flows into the ground. You can take it to a gas station.

It is worth choosing a refueller who organizes both transportation and a guarantee for work. It is better not to contact car stations, because their equipment does not have a special cut-off valve that regulates the filling of household gas cylinders with gas. They also do not have a special connector for connecting the cylinder to the station equipment.

One of the most popular topics of discussion at various construction forums is heating in a private house. gas cylinders. This raises several important issues related to the operation, self-installation and maintenance, as well as security measures.

Is it possible to heat the house with a gas cylinder

Individual gas heating of a private house with cylinders is a good alternative, in the absence of the possibility of connecting to a central highway. The cost of heating from gas is much lower than those that have to be paid for heating with electricity, solid fuel and diesel fuel.

The heat output of the system is enough to warm the house, heat enough water. It is possible to make autonomous gas-balloon heating country house or dachas bottled gas in a simple way.

Cylinders with liquefied gas Propane-Butane

Fundamentally, this scheme is no different from the operation of a gas tank. The propane-butane mixture has a high evaporation rate. The gas evaporating from the surface is suitable for the operation of hot water equipment. For effective work it is necessary to connect the gas cylinders to each other in a single fuel supply network to the boiler.

Depending on the season, a summer and winter gas mixture is used. In the first, the ratio of propane and butane is approximately 50 to 50%, the second is 85 to 15%. IN winter time gas with a high butane ratio freezes, causing the system to shut down.

Cylinders are filled under high pressure, resulting in the transformation of the gas into a liquid state. To ensure the reverse process and obtain a gaseous mixture, it is necessary to lower the pressure back. Continuity of gas supply is provided by a special reducer.

The node lowers and stabilizes the pressure. Only a hot water boiler can operate on liquefied gas, with a minimum operating pressure of 3-4 mbar. For convenience, autonomous gas heating of the house operates from a bundle of several cylinders connected to a ramp, which automatically switches the flow rate from the main to the backup fuel source.

The disadvantage of using tanks with liquefied propane gas is the impossibility of heating the entire building. The systems are mainly used for heating tourist tents, country houses, construction cabins and so on.

Do I need a permit for heating from gas cylinders

Gas heating systems from cylinders do not need official registration and registration with the gas service or the fire inspectorate. But, the legislation stipulates the norms and requirements necessary for safe operation, which apply both to the very connection and placement of gas-cylinder installations, and to the room used as a boiler room and LPG storage.

The legality of the use of gas cylinders for heating is stipulated in the Federal Law. Subject to the requirements of fire supervision, autonomous gasification of a private house through gas-balloon installations does not require registration. In practice, this means that the only possible claims may be from the fire inspector. At the next check, he can pay attention to errors, and in case of gross violations, he can seal the installation.

According to it, it is forbidden to install more than one fuel cylinder in the room. The heating system based on several individual cylinder installations must be removed from the residential building.

How to calculate how many bottles of gas you need per month

On average, a cylinder is enough for 3-4 days of work, subject to heating of 100 m². It turns out that for continuous operation of the boiler during the week, it is necessary to empty two containers of 50 liters each. each. Further calculation of gas consumption for heating when using bottled gas is carried out in the following way:

With the help of two 50l. cylinders can heat a house of 100 m² for a week.
For a month, respectively, about 10 cylinders are needed.

In order to accurately calculate heating using cylinders, it will be necessary to determine the possible heat losses, as well as an additional number of parsing points that will be used in addition to the heating boiler. The approximate consumption of liters of bottled gas per month will be about 500 liters.

The exact number of cylinders required to maintain comfortable temperature, is calculated only after the thermal engineering examination of the building.

What type of balloons to choose?

Since at least 4 cylinders of gas are needed to heat a house, it becomes a difficult task for the consumer: to choose the right container for storing LPG. You can understand the presented assortment if you conditionally classify products into several classes according to the following criteria:

The weak point of all LPG storage tanks is the shut-off valve - the valve. To extend the service life, you will need to put another control valve on the pipeline for each cylinder separately.

How to make gas heating from cylinders yourself

Installation autonomous gasification it is better to entrust a private house to specialists, but it is possible to connect the system with your own hands. This will require strict adherence to existing norms fire safety and SNiP.

For the correct implementation of the work, several questions will need to be clarified:

Where to locate and how to ensure the storage of cylinders.
How to properly connect several containers to a single network.
Is it possible to heat the cylinder in the winter season.

Where is the LPG equipment located?

Strictly speaking, the placement of gas cylinders in a room is possible only if no more than two containers are connected at the same time (norms may vary depending on the region). If the number of tanks exceeds the allowable limit, they are installed outdoors in a special cabinet. Additionally, the following rules apply:

Do not store empty containers together with filled ones. Every 4-5 years, the tanks are tested, after which they are again allowed to operate.

How to connect gas cylinders into a single system

The practice of heating from propane cylinders shows that you can significantly reduce costs if you connect not 1-2 containers at the same time, but the whole system. For mounting gas-balloon heating the following conditions must be met:

The scheme of the autonomous heating system for a summer house or a country house with gas-balloon equipment with a ramp allows you to simultaneously connect from 1-10 tanks with LPG. The actual need for the number of tanks is calculated from the total heated area.

How to heat a gas cylinder in winter

Heating of cylinders in winter can be done in several ways:

Methods for heating gas cylinders in winter do not allow the use of open flames.

Safety measures for the operation of cylinders

To heat a private house, you need from 4 to 10 cylinders of gas, which in itself is potentially dangerous. For this reason, it is necessary to strictly adhere to the rules of the PB:

Installation portable cylinders carried out strictly according to SNIP. Installation of the gas pipeline and connection to gas consumption points is carried out along the outer walls of the room.
The room used as a boiler room must have natural and forced ventilation.
The technical conditions for the installation and connection of Propane-Butane bottled gas for home heating allow installation in residential premises of 1 LPG tank. A system of several cylinders is installed exclusively on the street.
The warehouse for tanks should not have pits and basements.
Do not expose the tank to direct sunlight. The cylinder storage cabinet must be waterproof.

The use of liquefied gas in household cylinders for individual heating of residential buildings, SNiP and PB are allowed, but it is best to entrust the installation of the system to professionals. Practice shows that when self-connection it is quite difficult to take into account all existing requirements and ensure safe operation.

A propane gas boiler is able to heat a room no worse than a unit tuned to ordinary main gas. When installing the equipment, it is necessary to remember the oxygen regulator, since, according to the norms, it should flow into the unit more than into the usual boiler. In order to guarantee uninterrupted and safe work such a device, the boilers are equipped with special devices that stop the operation of the device in the event of an emergency. Another feature that significantly distinguishes a liquefied gas installation from a natural gas boiler is that the burner in it has a much smaller diameter, and, as a result, less pressure of the gas that comes from the cylinders.

Heating a private house with gas cylinders: the consumption of the necessary fuel

As practice shows and consumer reviews testify, for a house of 100 m², gas is needed approximately 3 to 2 cylinders per week, provided that the capacity is 50 liters. From this calculation, you can determine how much fuel you need to heat a country house. For example, for a house of 200 m², the amount of gas will increase to 4 containers per week. If your house has an area of about 50 m 2, then 1 cylinder will be enough for you.

The gas-cylinder installation of a gas boiler house for a private house on 100 m² liquefied gas cylinders requires the simultaneous connection of at least 4 cylinders - 2 working ones, plus 2 reserve ones. For an area of 200 m², 8-10 containers are usually enough. To ensure absolute ease of use, your set of connection equipment must have a ramp.

Alternative gas heating from cylinders: making the right choice

If you have a boiler that runs on propane for heating your summer cottage, then it is very difficult to accurately determine the flow rate of the gas it needs. Often this indicator depends on the method of warming the room. If the winter is severe, then the figure, of course, will grow. If you have insulated your house well enough and there are no severe frosts outside the window, then you will use gas with great savings.

To calculate the approximate figure for propane consumption for heating a room, use the formula, which shows that to obtain energy in the amount of 1 kW, you will need about 0.1 kg of propane.

The fuel consumption of a propane gas boiler will please you much more than you would have to pay for heating the same house with electricity. The most economical is the use of main gas, but it is not always possible to connect to a common centralized system gas supply. In this case, heating the space with a propane boiler would be the smartest idea. When buying a heating unit, be sure to take an interest in user reviews, consult with experts, and ask consultants to give you complete description device and the possibility of its conversion to liquefied bottled gas. Before making a final decision in favor of installing gas equipment, be sure to carefully weigh all the important arguments, calculate the fuel consumption, and only after that proceed with the installation steps.

Gas boiler from a cylinder of 50 liters: how long will it last

Often owners country houses, as well as real estate within the city, are abandoning centralized heating and the main gas pipeline in favor of alternative options that provide for the possibility of space heating using liquefied gas. It is easy to use and more affordable. The radiator and battery heat up just as well.

Modern gas heating of premises using liquefied gas boilers involves the use of a number of parts, consisting of several types of equipment and a heat supply system. Only the main unit in this design still remains the boiler, which is responsible for receiving heat.

As in standard heating appliances, a gas boiler that operates on liquefied gas allows private houses to provide heating of rooms, as well as hot water supply, by burning it. Often this heating equipment is compact in size, high performance and good efficiency rates, which sometimes reach 95%.

In addition, this device has the following advantages:

Low cost;
Allows you to significantly reduce the funds spent on heating and hot water;
Can function at low gas pressure;
Has low fuel consumption;
Allows you to turn off the heating when it is not needed.

If you use a propane gas boiler, then the fuel consumption will be approximately the following: 130 sq. m, taking into account the quality installed windows And entrance doors, will be in the region of one cylinder, weighing 50 kg for 2 or 3 days. If the desired air temperature in the room is not less than 21-23, and in addition to this, you also need hot water, you will have to fill 3 - 4 cylinders per week. If your house is smaller, then fuel consumption decreases proportionally.

Features of heating with liquefied gas

The choice of heating units that run on liquefied gas is simply huge today. Here you can find products from both domestic manufacturers and goods from various world brands.

Each model you meet has a unique operational properties and their corresponding cost. In order for the process of heating a country cottage with bottled propane gas from a gas tank to become economical and efficient, you need to choose the right type of unit and take into account its main features of operation and technical capabilities.

In order for a propane heater to work properly, it must be properly connected and replaced with nozzles. This equipment has performed quite well. It is willingly installed by the owners of a country cottage, who do not have the opportunity to connect to a common gas main or independent heating. This type of heating is very practical in operation, has a low output coefficient harmful substances, compact, and the efficiency at the same time is quite high. Propane-butane gas is a great alternative to the usual natural gas.

When buying a boiler, consider the following:

Type of heater. Apparatus for heating on liquefied gas can be single-circuit and double-circuit. The first option is suitable exclusively for heating, while the second type, in addition to heating, also provides hot water supply.
efficiency. In fact, all units that operate on liquefied gas have high efficiency rates that reach 90-94%.
Power. This indicator is one of the most important parameters characterizing the type of heating equipment. It is necessary that the unit you choose can easily provide hot water and heating all rooms in the house.

And, of course, an important indicator is the manufacturing company. Practice shows that it is highly desirable to give preference to firms that have been successfully operating in the market for a long time and have positive user reviews.

Heating from a gas cylinder (video)

Owners of private dwellings should be aware that heating boilers running on liquefied gas. It is possible to easily transfer to a different mode of operation, and they will work using a different type of fuel, or rather main gas. To do this, it is only necessary to replace the burner, nozzles, remove the gearbox and replace some other equipment. You can do all this with your own hands, however, in order to properly establish a connection, you must follow the rules for using propane installations.

A propane gas boiler is able to heat a room no worse than a unit tuned to ordinary main gas. When installing the equipment, it is necessary to remember the oxygen regulator, since, according to the norms, it should flow into the unit more than into the usual boiler. In order to guarantee the uninterrupted and safe operation of such a device, the boilers are equipped with special devices that stop the operation of the device in case of an emergency. Another feature that significantly distinguishes a liquefied gas installation from a natural gas boiler is that the burner in it has a much smaller diameter, and, as a result, less pressure of the gas that comes from the cylinders.

Heating a private house with gas cylinders: the consumption of the necessary fuel

The gas-cylinder installation of a gas boiler house for a private house on 100 m² liquefied gas cylinders requires the simultaneous connection of at least 4 cylinders - 2 working ones, plus 2 reserve ones. For an area of 200 m², 8-10 containers are usually enough. To ensure absolute ease of use, your set of connection equipment must have a ramp.

Alternative gas heating from cylinders: making the right choice

To calculate the approximate figure for propane consumption for heating a room, use the formula, which shows that to obtain energy in the amount of 1 kW, you will need about 0.1 kg of propane.

The fuel consumption of a propane gas boiler will please you much more than you would have to pay for heating the same house with electricity. The most economical is the use of main gas, but it is not always possible to connect to a common centralized gas supply system. In this case, heating the space with a propane boiler would be the smartest idea. When buying a heating unit, be sure to take an interest in user reviews, consult with specialists, and ask consultants to give you a complete description of the device and the possibility of converting it to liquefied bottled gas. Before finally making a decision in favor of installing gas equipment, be sure to carefully weigh all the important arguments, calculate the fuel consumption, and only after that proceed with the installation steps.

Gas boiler from a cylinder of 50 liters: how long will it last

Often, the owners of country houses, as well as real estate within the city, refuse centralized heating and the main gas pipeline in favor of alternative options that provide for the possibility of space heating using liquefied gas. It is easy to use and more affordable. The radiator and battery heat up just as well.

Modern gas heating premises with the help of boilers operating on liquefied gas, involves the use of a number of parts, consisting of several types of equipment and a heat supply system. Only the main unit in this design still remains the boiler, which is responsible for receiving heat.

As in standard heating appliances, a gas boiler that operates on liquefied gas allows private houses to provide heating of rooms, as well as hot water supply, by burning it. Often, this heating equipment is characterized by compact dimensions, high performance and good efficiency rates, which sometimes reach 95%.

In addition, this device has the following advantages:

Low cost;
Allows you to significantly reduce the funds spent on heating and hot water;
Can function at low gas pressure;
Has low fuel consumption;

Allows you to turn off the heating when it is not needed.

If you use a propane gas boiler, then the fuel consumption will be approximately the following: 130 sq. m, taking into account well-installed windows and entrance doors, will be in the region of one cylinder, weighing 50 kg for 2 or 3 days. If the air temperature in the room you want is not less than 21-23, and in addition to this you also need hot water, then you will have to fill 3-4 cylinders per week. If your house is smaller, then fuel consumption decreases proportionally.

Features of heating with liquefied gas

Each model that you will meet is distinguished by unique performance properties and corresponding cost. In order for the process of heating a country cottage with bottled propane gas from a gas tank to become economical and efficient, you need to choose the right type of unit and take into account its main features of operation and technical capabilities.

In order for a propane heater to work properly, it must be properly connected and replaced with nozzles. This equipment has performed quite well. It is willingly installed by the owners of a country cottage, who do not have the opportunity to connect to a common gas main or independent heating. This type of heating is very practical in operation, has a low coefficient of emission of harmful substances, is compact, and the efficiency is quite high. Propane-butane gas is a great alternative to the usual natural gas.

When buying a boiler, consider the following:

Type of heater. Apparatus for heating on liquefied gas can be single-circuit and double-circuit. The first option is suitable exclusively for heating, while the second type, in addition to heating, also provides hot water supply.
efficiency. In fact, all units that operate on liquefied gas have high efficiency rates that reach 90-94%.
Power. This indicator is one of the most important parameters characterizing the type of heating equipment. It is necessary that the unit you have chosen can easily provide hot water and heating to all rooms in the house.

To create a well-functioning piping of the heating system of a private house, as a rule, gas boilers are used. Compared with alternatives thermal appliances, they are the most profitable and easy to operate. But what about those who do not have the opportunity to connect a private house to a centralized gas pipeline? In this article, you will learn whether it is possible to heat a house with gas from cylinders and how to properly set up safe heating with gas cylinders.

What is more profitable - to use a convector or a balloon?

Until recently, all experts unanimously argued that heating with gas cylinders in a private house is a prohibited way to warm up a home. And all because it carries a danger to the health and life of people living in a room heated in this way. Today, thanks to many years of attempts to introduce this version of the heating system, the opinion of experts has changed. The main thing is to properly tie the heating circuit.

According to expert estimates, as of today, heating a country house with bottled gas is becoming more and more popular. In addition, qualified specialists recommend equipping individual rooms with special convectors. So, in a matter of minutes, they can warm up the air in the room due to the appearance of gas combustion products. As a rule, most models of gas convectors have compact dimensions and are frost resistant.

Thanks to innovative technologies manufacturers of heating equipment offer potential consumers the widest range of units that operate using liquefied gas. This option is not much different from equipment that is identical in functionality, for example, water boilers. However, there are some subtleties: you will have to regularly monitor the amount of gas in the vessel. When using two boilers at once, you can in some sense insure yourself, thereby eliminating the need for constant checks of cylinders to control the volume of fuel resources.

Usage electric convectors for heating a private house, although it happens faster, it is less comfortable and more expensive in everyday life.

Proper storage is the key to safety

To avoid emergencies when using gas cylinders for heating a private house, it is necessary to adhere to a number of recommendations:

Gas cylinders are located away from gas stove at a distance of at least 50 cm. Whereas the minimum distance between tanks with liquefied gas and heating radiators should be 100 cm.
Gas cylinders for heating are stored outside. To avoid direct sunlight and climatic precipitation on fuel containers, it is necessary to reliably protect it, placing it, for example, in a metal sealed cabinet. In addition, there are special safes for storing such items, which you can easily purchase at any specialized store.

For the winter, the box where the cylinder is stored is insulated mineral wool, rags, sand, etc. the main task- avoid freezing of the container, otherwise the entire heating system will stop, the coolant in the pipes will freeze, which can lead to a rupture of the line.

When using liquefied gas in cylinders for home heating, give preference only to those containers that have successfully passed the suitability test.
The residual pressure should not exceed 0.05 MPa.
The gas cylinder must not have mechanical damage and deformation.

Gas cylinders with slight corrosion damage on their surface are not suitable for use!

When storing gas cylinders indoors, it is worth paying Special attention temperature conditions. So, it is strictly forbidden to operate such containers at temperatures above 45 ° C.

By adhering to these rules, you will not only be able to keep the heating system intact, but also protect yourself and your loved ones by ensuring their safety. It is strictly forbidden to neglect such recommendations for storing gas cylinders!

Advantages of gas-balloon heating

Gas-balloon heating of a private house is a financially profitable investment. And all because in such vessels there is liquefied natural gas. It is able to literally change its state in a few seconds and transform into a gaseous state. In addition, it has a high efficiency compared to other, more expensive views fuel. And this is a decisive factor in the choice of energy resources.

If you are planning to furnish your home independent heating bottled gas, then believe me, in this case it will be truly autonomous. This is directly related to the fact that vessels with fuel without unnecessary problems can be transported from place to place. And even outside of civilization, this heating option will be an excellent way to create comfortable temperature conditions in the house.

In addition, using gas cylinders for heating your home, you not only heat the room, but you can also use hot water at any time, which circulates through the heating main. For this reason, heating on gas cylinders is an indispensable and most profitable way to equip a thermal block in rooms where it is not possible to use any other alternative view fuel. And besides, it can rightfully be considered an independent heating method, since the availability of fuel resources depends solely on you and your reserves.

As of today, propane (propane-butane) is considered the most common fuel for heating country houses. Such systems are environmentally friendly, they are easy to operate and maintain, economical in financial costs, and stable (pressure drops in the system are not observed).

Regardless of what type of energy resources you used before, wood, gas, coal, at any time you have the opportunity to switch to such a heating system.

And if you read reviews about heating a country house with liquefied gas, you will surely make sure that this option is indispensable for the construction of both country houses and residential private buildings.

Disadvantages of heating with liquefied gas

Like any other heating system However, the use of gas cylinders as a fuel for space heating has a number of disadvantages. And if you want to equip your home with just such a thermal unit, then it will not be superfluous if you study the negative aspects of this issue.

The very first disadvantage of such systems is the instability of the cost of fuel. So, in one region, gas will have one price, while in another it will be somewhat different.

Purchase gas only from trusted suppliers. Otherwise, the risk of reducing the efficiency of the heating unit from low-quality fuel is very high.

In addition, liquefied gas is an explosive substance. Therefore, follow the rules for the installation and operation of containers with this type of fuel.

Secure storage

And at the end of this publication, I would like to add: if you heat your home with a gas-cylinder installation, then do not neglect any advice given to you by professionals when buying containers for this fuel. If you adhere to the set of rules presented in our publication and do not violate them, then the heating unit will work efficiently and smoothly. In addition, the consumption of fuel resources for heating your home will be minimal, and you will be able to protect yourself from emergencies.

VIDEO: Autonomous gasification system from propane cylinders (standard 50 liters)