Which heat gun is better: features of using different types and calculating the required power. How to choose an electric heat gun (220V)? Rating Heat gun for heating a garden house

(function(w, d, n, s, t) ( w[n] = w[n] || ; w[n].push(function() ( Ya.Context.AdvManager.render(( blockId: "R-A -345261-6", renderTo: "yandex_rtb_R-A-345261-6", async: true )); )); t = d.getElementsByTagName("script"); s = d.createElement("script"); s .type = "text/javascript"; s.src = "//an.yandex.ru/system/context.js"; s.async = true; t.parentNode.insertBefore(s, t); ))(this , this.document, "yandexContextAsyncCallbacks");

Heat guns are used to quickly warm up unheated or poorly heated rooms during the cold season. Compared to other heating options, heat guns are the fastest, cheapest, and most effective way to raise the temperature in a room.

Which heat gun is better

There are three types of heat guns, depending on the principle of air heating used, these are electric, gas and diesel. Electric guns are suitable for raising the temperature in residential areas, while gas and diesel guns are best used only in non-residential and well-ventilated areas. Each heat gun has its pros and cons, and you can evaluate them by looking at the rating of the best heat guns.

They operate on the same operating principle as conventional fans. The difference in design, power and performance, guns are much better at handling heat.

Electric heat guns are ideal for heating residential areas because they do not emit harmful compounds and do not affect the quality and cleanliness of indoor air in any way. As heating elements, a spiral or ceramic plates are used.

Gas

The efficiency of such guns is much higher than that of electric guns, so they can be used in large rooms. But it is important that this room has good ventilation and constant access to fresh air. Also, when working with gas, safety precautions should be observed, as it is explosive.

Diesel

For heating, a diesel engine and liquid fuel are used. There are two types of diesel guns - with direct and indirect heating. In guns with direct heating, combustion products immediately enter the surrounding air, so they must be used in ventilated rooms. In guns with indirect heating, the products of combustion are only partially released into the air, so they can be used in rooms with medium ventilation.

There are also infrared diesel heaters, which do not heat the air, but the objects that are in the room.

The best electric heat guns

This is an electric heat gun with a ceramic heating element. She has two power levels - 1 and 2 kW., This is enough to increase the temperature in a room of 20 square meters. meters, 43 degrees. The gun itself weighs only 3.5 kilograms, so it can be easily carried between rooms. The model is suitable for heating small living spaces because it is safe, compact and convenient to use.

• There are two power levels;
• Compactness and lightness.

• Cannot be used around the clock, after 22 hours of operation a break is required to cool the heating element;
• There is no temperature indicator, so the gun cannot turn off and cool down on its own when overheated.

Eugene, 54 years old. This gun is not suitable for professional use as it lacks power. I constantly use it more as a heater in rooms where the design of the heater is not important, such as the basement, garage. For its price, a fairly high-quality assembly and a compact size and normal power. Overall happy with the purchase.

The electric heat gun, unlike the previous model, reaches a power of 5 kW, which allows you to heat the room more quickly, but at the same time, according to the manufacturer, it can only increase the temperature by 40 degrees.

(function(w, d, n, s, t) ( w[n] = w[n] || ; w[n].push(function() ( Ya.Context.AdvManager.render(( blockId: "R-A -345261-7", renderTo: "yandex_rtb_R-A-345261-7", async: true )); )); t = d.getElementsByTagName("script"); s = d.createElement("script"); s .type = "text/javascript"; s.src = "//an.yandex.ru/system/context.js"; s.async = true; t.parentNode.insertBefore(s, t); ))(this , this.document, "yandexContextAsyncCallbacks");

It is also impossible to use this gun around the clock, after 24 hours of operation it must be turned off and cooled for two to three hours. The productivity in this gun is 400 cubic meters warm air per hour, which is about three times more than the previous model. But the increase in power affects the size of the device itself, it weighs more than 6 kilograms and is not so compact.

• High performance and power of work;
• Possibility to use it continuously 24 hours.

• Size and weight, this cannon is difficult to carry between rooms;
• The absence of a temperature sensor, so it is necessary to constantly monitor the temperature of the gun so that it does not overheat.

Anna, 35 years old. We bought a cannon for the house to quickly heat the rooms. We tried, as a result, from a temperature of -2 to 27 degrees, a room of 16 square meters. meters warmed up in an hour, then tried in the kitchen, 10 sq. meters in about 40 minutes. At the same time, I heated at a power of 5 kW. After the test drive, I thought about buying a second one of the same kind to heat the rooms faster, an indispensable thing, especially if there is no wood heating in the country house!

This heat gun is similar in its characteristics to the first option, but it has a significant advantage - it is compact, the model weighs only 1.7 kilograms. Otherwise, its power reaches the level of 2 kW, and the productivity of warm air is 130 cubic meters per hour. It is not recommended to use it in rooms with a large area, as it will take several hours to heat them up.

• The presence of a drip thermostat, with high heating, the gun should automatically turn off for cooling;
• Possibility of use in residential premises;
• Compact and lightweight, the heat gun weighs less than two kilograms and even a child can carry it.

• Low power and performance, it takes more than a few hours to heat large rooms;
• Do not use the cannon continuously for longer than 20-22 hours.

Oleg, 43 years old. The manufacturer claims that there is a capillary thermostat, I did not find it. At the same time, there is a thermostat in the gun at the same level as in a conventional iron, which does not work to heat the air, but to heat the body. Another significant drawback is that the mode switches are not set to current, the input wires are simply inserted and pressed by spring-loaded plates. Also, when the thermostat is activated, the fan turns off at the same time as the heating element. But if you refine it, then for your money it’s a pretty good device.

According to its technical characteristics, the model compares favorably with the previous versions. Its peculiarity is that when heated, it does not dehydrate the air, so it can be used for an apartment without additional problems.

In addition, despite low power- 2 kW, it differs enough high performance warm air - 190 cubic meters per hour. This is enough to warm up a small room in an hour to comfortable temperature. It can also be used both for a summer house and for a garage, because it is compact and easy to carry.

• There is an air humidity control system, that is, when using this heat gun, the air in the room will remain with normal humidity;
• There is a thermal control, that is, the gun will automatically turn off when overheated, this will help to avoid fires and short circuits;
• Lightweight and compact - this gun is easy to carry between rooms.

• Loud fan that is very audible during operation.

Artem, 32 years old. Bought for heating the locker room at the facility, this basement with bare concrete, an area of ​​about 12 sq. meters. With the help of a cannon, I heated it up to a comfortable temperature in about two hours, while the room became very warm, during the night even wet clothes and shoes on hangers had time to dry. A month has passed since the purchase, I use it around the clock, without turning it off, until it fails, but there are several drawbacks. When operating at 1 kW, it blows cold air from below. The fan is also very loud, you can hear the roar at night. Insensitive thermostat.

Unlike the previous ones, this is a gas heat gun. Therefore, by using a different principle for heating, it is more efficient. Its maximum power is 10 kW. and the productivity of warm air is 300 cubic meters per hour.

The package of this gun includes a thermal sensor and protection against overheating, that is, when the permissible temperature level is exceeded, this device automatically turns off. This avoids dangerous situations. Its disadvantage is that there is no fuel indication level, so it is impossible to determine how much fuel will last and when to change the cylinder. But fuel consumption can be roughly calculated from the manufacturer's data, he claims that no more than 0.86 kilograms of gas is consumed per hour.

Since this gun is gas heated, it should not be used in residential areas, it is only suitable for a garage that has good ventilation, as well as for technical work.

In a climate where winter lasts almost half a year, heaters of all types are popular. These types include an electric heat gun, designed for fast and intensive heating of rooms of various sizes. Unlike passive heaters that do not have rotational elements in their design, this type of device is able to provide heating even for summer cottages, in cold, unheated rooms. To determine which model is the best, a rating of heat guns is offered, which presents ten products from various manufacturers.

For those who want to buy an inexpensive and fairly productive gun, you should pay attention to the model from the Tropic brand. The device has a three-position power switch, corresponding to 5, 4.5 and 3000 watts. The volume of air exchange is limited to an average of 400 cubic meters. m/h Savings in use will ensure standard energy consumption - 220 V, which is important with ever-increasing electricity rates. Airflow provides active fan. The weight of the device is 4 kg, it also has a handle for easy carrying. When the main elements overheat, the power is automatically turned off. The average cost of TVT-5 is 3670 rubles.

1. Mobility.
2. High heat dissipation.
3. Low power consumption.
4. Non-marking body.
5. The ability to adjust the intensity of heating.

1. Relatively high noise level when working at high speeds.
2. Increased vibration at maximum load.
3. Heating of the device itself during prolonged operation.

Prices :

The rating of heat guns is represented by another domestic brand. At a price of 2670 p. the device offers a pretty good set of basic features. There are two blowing power switching speeds, the minimum level is 300 W, the maximum position is 1500 W.

The device is able to operate from a regular 220 V household outlet, which makes it interesting option for heating a medium-sized room (up to 25 m2).

A large cooler provides a continuous and fairly fast flow of hot air. There is no possibility of additional fastening, the device works only in outdoor mode. The temperature is controlled mechanically.

1. Lightweight device (only 3.2 kg).
2. Modest and discreet design.
3. Profitability.
4. Good stability on flat ground.

1. There is no automatic shutdown in case of overheating.
2. Few blowing speeds.
3. There is no timer.

Prices :

What price is the consumer willing to pay for the opportunity to save on electricity? Inforce brand engineers believe that it is not at all necessary to overpay for this. The model will cost a modest 2220 rubles. For the price, it has quite a few benefits. With a standard air flow of 400 cubic meters per hour, the device has a power of 2 kW, which is not bad, considering the volume of the room that it can heat. Available built-in thermostat, and thermostat, allowing you to work in two modes (1000 and 2000 W). And the presence of a sensor that controls the ambient temperature allows you to turn off the heating when the set value is reached.

1. The cross section of the gun wires has been increased (the model does not overheat).
2. Safety in use (heater is equipped with a special grid).
3. Device durability.
4. Accessible and understandable management.
5. Plug for standard outlet.

1. The gun is quite heavy, given that models with similar characteristics have less weight.
2. Doesn't work well for heating large rooms.
3. Bright color, so the device is not able to fit into every interior.

Prices :

Budget device, if we consider its cost. With the characteristics, everything is not bad: 220 V voltage, the volume of blown air is 390 cubic m / h, the frequency is 50 Hz.

The best heat guns have additional advantages in their arsenal that ensure their success among consumers. This device has increased power- 3000 W. There are two speeds of blowing intensity here, at half the power of the device and max. There are other engineering solutions that improve the heating area (large fan blades, tubular heating element). The price tag for the QE-3000 ETN 649-257 is within 2990 rubles.

1. heating element made of of stainless steel.
2. The presence of a ventilation mode without heating.
3. Convenient legs for fixing the device.
4. Reliable nozzle protection against unexpected contact.
5. The ability to adjust the position of the gun horizontally.
6. Large bladed cooler.

1. Noise level emitted during operation.
2. Weak airflow.
3. The noise from the fan blades.

Prices :

This brand is firmly entrenched in the market of heaters. Its products are known primarily for their reliability. The considered model of the heat gun is one of the most budget on the market, the cost is only 1655 p. Power - 2 kW, there are two modes of operation. The device is powered by a 220 V socket. Of the pleasant features, I would like to note the weight of the gun, only 1.55 kg, which makes it convenient for transportation, both around the house and to the country. Small dimensions make it mobile. The two-bladed fan is made of steel, which increases heat dissipation during operation.

A heat gun from Hyundai confidently heats a room up to 20 m, but it is not recommended to use it as the main heating method.

1. Affordable price.
2. The fan is made of stainless steel.
3. Low noise level (51 dB).
4. Strong fixation due to thoughtful design.
5. Compactness.

1. Sometimes stalls during intermittent operation.
2. Weak heating of medium and large rooms.
3. The rattling of the heating panel.

Prices :

The proposed model from the German manufacturer is quite heavy - 8 kg, but this more than pays off with its performance: in an hour it passes 400 cubic meters of air through itself, and is powered by a 220 V home outlet.

The declared power is as much as 4 kW, which is an undeniable advantage over similar models.

The thermostat and switch-off delay function help to optimize the use of electricity. The body of the gun is made of metal, which increases the strength of the structure and heat transfer during operation. The cost of the model is 3056 rubles, considering the power, it is a very interesting offer on the market.

1. The possibility of not only heating, but also drying different rooms.
2. TEN from stainless steel.
3. Stepped airflow adjustment.
4. Virtually silent operation in heating mode.
5. The presence of a thermostat.

1. No mains plug included.
2. Inconvenience during transportation (due to size).
3. A light weight.

Prices :

This electric heat gun also does not go beyond the budget segment, its cost from retailers is approximately 2999 rubles. A feature of the considered model is record power in the segment, equal to 4.5 thousand watts. There are few price competitors on the market that can supply the same amount of heat for the specified price tag. Unfortunately, you have to pay for such power with considerable dimensions: 8 kg. Other characteristics are standard: power - 220 V, space heating - up to 35 m, no network cable. The SPEC brand belongs to a Russian company, the production of goods is carried out in our country.

1. Very fast space heating.
2. Possibility of drying floors and walls.
3. The service life has been increased (up to 40,000 hours).
4. Two heating elements covered with stainless steel.
5. Round body shape.
6. Does not heat up during operation.

1. The presence of an extraneous odor (especially during the first time of work).
2. Vibration of the case during long-term operation and insufficiently even surface.
3. The device is not very mobile.

Prices :

The top three is closed by a model from the famous brand "Ballu". The consumer knows many positive characteristics that are the hallmark of this brand. The cost of the indicated unit is 3190 rubles, which is slightly higher than competitors in the class. For this amount, the manufacturer offers 4.5 kW of power, and, at minimum speed, the device operates with a power of 3000 W, which makes it convenient for use in large unheated rooms, such as warehouses or garages. The electric gun is powered by a standard 220 V network. From the pleasant innovations internal heat shield, allowing you to keep the temperature of the case in the comfort zone.

1. Easy-to-carry dimensions.
2. Thoughtful carrying handle.
3. Availability mechanical thermostat.
4. Reliable fan protected from dust and moisture.
5. Special coated legs.

1. Sufficiently loud operation of the device at maximum speed.
2. Operation at increased voltage (current 21 A).
3. Small nominal heating area.

Prices :

In search of an answer, what heat gun buy, we came to a model that occupies the second line in the ranking. One of the main advantages is, undoubtedly, the price: 2,185.00 rubles. $2,772.00 The frequency is fixed at around 50 Hz, the volume of air blown out is 160 cubic meters per hour. The device is not the lightest (3.5 kg), but it does not experience overloads, because it does not operate at higher frequencies, the rated voltage is 9.1 A. In sockets. Control Panel mechanical, the heating element is smooth. The device is equipped new system surge protection.

1. Very compact dimensions.
2. Two usage modes: half and max.
3. Discreet design that fits well into the interior of an industrial or warehouse space.
4. Convenient location of control buttons.
5. Excellent heat dissipation characteristics.

1. Heterogeneous body, which over time leads to the appearance of extraneous noise.
2. Short fork, often have to use extra carrying.
3. Plastic grate heating element.

Prices :

The top of the ranking is occupied by a device from the Denzel brand, and it did not get here by accident. First, it should be noted the reliability of this gun, which has proven itself in completely different operating conditions. Its cost is 2530 rubles, which, given the maximum power of 3000 W, is very good. There is built-in overheating protection, which means increased security. Mechanical control, the amount of blown air - 250 cubic meters. m/h Fixation only horizontal, on the floor or other flat planes.

1. Bright and recognizable design.
2. Ease of use.
3. Improved device reliability.
4. Mobility while moving.
5. The presence of a built-in thermostat that allows you to accurately measure.

1. No timer.
2. The device does not fit snugly enough to the surface, which can cause it to rattle during operation.

Prices :

Conclusion

Considering the rating of electric guns, we can conclude that the offer for this category of goods is high. However, demand, given the climate of many European countries, has been and remains high. A heat gun can serve as the main source of heating, most often it is used in workshops and small industrial workshops, as well as in country houses and utility rooms.

The category of active heaters is the optimal solution for those who want to heat large areas. For those who prefer to raise the temperature in small room and appreciates silence more, it may be worth paying attention to devices with reduced noise levels, which were also considered. Don't forget that main task A heat gun is a fast and high-quality heating of a room, so you should choose a device carefully, weighing all the pros and cons.

From this article you can find out what features the thermal electric gun 220V and advice on choosing the best device, taking into account the main criteria: technical characteristics, the purpose of the heated room and the operating conditions that it has, consumer reviews, prices and other parameters. The text provides an overview of the most popular manufacturers and models of electrical devices.

High-quality heating of large premises: garages, basements and other spaces will be provided by electric heat guns connected to the 220 V network. These devices have a high power rating, due to which they are able not only to quickly dry and warm the air, but also to save the result for a long time.

An electric gun is a heating equipment with a mobile or fixed structure. These devices have industrial and household purposes.

The scope of their application extends to the heating of the following objects:

• storage areas;
• Living spaces;
• garages;
• construction sites;
• production shops, etc.

The assortment of modern stores includes devices designed for connection to a three-phase and two-phase network. Therefore, consumers have the opportunity to buy an electric heat gun 220V and 380V. Networks with two phases are common almost everywhere, mainly in city apartments. Their voltage is 220V. Three-phase communication options are used to feed industrial facilities. In rare cases, houses from the private sector are powered from networks with a voltage of 380V.

Note! Electrical appliances are environmentally friendly and safe. Their operation is not accompanied by the release of exhaust gases and toxins. Therefore, it is allowed to use an electric gun for heating residential premises without a threat to human health.

The principle of operation of an electric heat gun 220V

The heat gun, which is powered by electricity, has a simple principle of operation. It is a ventilating device equipped with an air heating function. In addition to standard devices, there are guns with an infrared heating principle. Heat transfer in them is carried out through the use of infrared rays. Electrical devices are designed for operational space heating small size. An exception is industrial electric heat guns, which have high level power and performance.

Standard products consist of the following components:

• a heating element;
• ventilation device;
• temperature controller.

Each of these components performs a specific function. The heating element is of two types: tubular (TEN) and spiral. The first option is used much more often, since it has more long term service than a spiral. In addition, the heating element burns out less oxygen in the process of heating the room.

The ventilating device forms air streams which pass through a heating element, and the thermostat provides regulation of temperature of the room. This component protects the structure from overheating. When the air temperature reaches the required value, the thermostat automatically turns off the power supply.

Choosing a heat gun: photos and prices of popular models

Electrical appliances can be used to heat small buildings that do not have the conditions for arranging a full-fledged heating system or its construction will be impractical. Alternatively, you can purchase a heat gun for your garage, workshop or utility room. It is able to provide the necessary level of heating in rooms where a person is from time to time.

In addition, electrical appliances are widely used in construction. With their help, you can effectively heat the construction site, as well as reduce the drying time of surfaces after finishing. The capabilities of electric guns will be useful during wet construction work.

On an industrial scale, the use of guns extends to premises that are often used by people, for example, shops, waiting rooms at train stations and airports, offices, etc. For example, the capabilities of the Ballu BKX-3 electric heat gun or Zubr ZTP-2000-M2 are enough for heating rooms of 25 m². Any of these models can heat a pavilion, a small office or a living room.

Note! A power of 1 kW is enough to heat an area equal to 10 m².

The Ballu BKX-3 heat gun is often used as a heating device in rooms that are deprived of the constant presence of people.

These objects include:

• storage areas;
• industrial premises;
• hangars and bases;
• utility rooms, etc.

In most cases, buyers have a positive impression of using the Ballu BKX-3 heat gun, the reviews left on the forums reflect the advantages of this model:

“The Ballu gun I bought last month completely changed my opinion about these devices. Compact and lightweight design quickly heats up the room. At the same time, the purchase of the device was inexpensive. I use it to heat rooms at a construction site so that the workers have somewhere to warm up during a break. Sometimes the start button jams in severe frost. But I don't think it's a big issue."

Viktor Martynyuk, Moscow

The power of the Ballu BHP-M-5 heat gun is enough to heat a production area or a living room with a size of 45-50 m². The device is ideally suited for garages, production rooms and workshops. All controls are located on the front panel of the structure, which makes its operation more convenient. That is why this model is so popular.

How to choose a heat gun for a garage: the best models

The capabilities of the Master B 22 EPB heat gun allow you to effectively heat the premises of garages, car workshops, warehouses and hangars. The design has a power of 22 kW. Moreover, this indicator can be adjusted by setting the settings in the range from 11 to 22 kW. The gun is economical and equipped with a built-in air flow regulator.

Benefits of an electric garage heat gun:

• the case is made of stainless steel with an increased margin of safety;
• no odors;
• the device during operation does not burn out oxygen from the room;
• work is accompanied by a minimum level of noise;
• the presence of a built-in thermostat;
• ergonomic design.

The voltage recommended by the manufacturer for this model of a thermal electric gun is 380V. The disadvantages of the device include only a short power cord, which significantly limits the areas available for placing the structure in the room relative to the sockets.

For heating the garage, the Ballu BHP-M-3 heat gun, which is powered by a 220V mains, is also optimal. This model belongs to the category of professional heaters.

Model advantages:

• two-stage power adjustment;
• the presence of air ventilation mode without heating;
• safe operation that does not require supervision, thanks to the option of manually restarting the thermostat;
• gratings and supports are treated with a wear-resistant anti-vandal coating.

This gun, with a power of 3 kW, can fully heat a room with an area of ​​​​35 m².

Note! The design has two mounting methods: desktop and floor. Especially for this, the manufacturer has provided the appropriate mounts.

This does not end the list of advantages of an electric heat gun, the buyer's review from the forum reflects the advantages identified during operation:

“Despite its compact size, the Ballu BHP-M-3 cannon heats the room perfectly. The air flow from the fan side is quite strong. The unit is ideal for a garage and similar spaces, although I would not use it as a heat gun for a home. In my opinion, the device is quite noisy for living rooms. The optimal ratio of cost and quality. I advise you to buy."

Konstantin Birkin, Moscow

What is the best electric heat gun for your home?

IN residential buildings and apartments often use thermal electric guns Resant TEP-2000 and TEP-2000K as an alternative replacement for a centralized heating system that does not provide the necessary heating. The Resanta trademark is a certified Russian manufacturer producing designs of various price segments and power levels.

Related article:

Features and characteristics of diesel appliances, types of designs, their advantages and disadvantages. Repair and selection of equipment.

Advantages of the Resant TEP-2000 heat gun:

• profitability;
• adjustable power;
• built-in regulator with three modes of air supply;
• the case has a durable and wear-resistant protective coating;
• special Aerodynamic Control technology;
• low cost;
• built-in overheating protection function.

Consumers during operation noted the following shortcomings:

1. The appliance is not designed for heating large rooms.
2. With prolonged use, a characteristic sound appears.

For heating premises for various purposes, an electric heat gun Zubr EXPERT Square ZTPE-3000-M2 can be used. The design has a strong and reliable body. The gun is capable of heating an area equal to 30 m². The device is protected against overheating by a fuse. Heating is carried out by a tubular element made of stainless steel.

Design advantages:

• purge before shutdown function to prolong service life and provide protection against overheating;
• reset reset button for fuse;
• capillary type temperature controller with high accuracy of action;
• smooth temperature control system;
• high power motor.

Note! The design is completed with an additional protective screen, which prevents overheating of the body part.

Many consumers noted the advantages of this heat gun, reviews confirm the advantages of the EXPERT Square ZTPE-3000-M2 model:

“The gun is powerful, yet very quiet. I did not notice any shortcomings. My husband and I bought this model for the country two years ago. The device works all this time without any problems. The purchase paid off."

Marina Mozgovaya, St. Petersburg

“The Zubr cannon works very quietly. The efficiency for 3 kW is noticeable. The price is a little high, but the quality matches the price. The design is operated daily for 6 hours. All parts are intact, do not melt, do not burn. I recommend this model to everyone.

Yaroslav Sidorenko, Moscow

The Best Electric Heat Guns for Construction Purposes

The manufacturer Ballu produces heating equipment for both domestic and professional use. For drying the air in the room, as well as the treated surfaces, the Ballu BHP-P-5 heat gun is perfect. Like most professional heaters, this model has many advantages.

Advantages of a heat gun:

• rapid heating of the room and drying;
• several operating modes (half and full heating mode, ventilation);
• increased working life of parts;
• heating elements are made of stainless steel, due to which the service life of these elements is 25,000 hours;
• built-in thermostat to protect the structure from overheating;
• internal security system;
• the angle of inclination of the structure is adjustable.

For construction and repair, the capabilities of the Ballu BHP-P-3 heat gun can be successfully used. Max power design is 3 kW. The device is able to fully heat an area of ​​​​35 m². The maximum time of continuous operation is 24 hours.

Advantages of the BHP-P-3 model:

• elongated shape of the body, providing the ability to direct air flows to the required area;
• the surface of the case does not overheat due to double walls;
• two-stage power control system and ventilation mode, which is not accompanied by heating;
• built-in thermostat.

The supports and rims of the structure are protected by an anti-vandal coating, which is characterized by high wear resistance.

Average prices for electric heat guns 220V

One of the criteria that is important for buyers is the cost of devices. This indicator depends on the quality of the product and the manufacturer, the power level and other technical indicators of the device.

Average prices for electric heat guns:

Make and model of the appliance	price, rub.
Ballu BKX-3	1400
Resanta TEP-2000	1770
Resanta TEP-2000K	1850
Ballu BHP-M-3	2350
Zubr ZTP-2000-M2	2440
Bison EXPERT Square ZTPE-3000-M2	2470
Ballu BHP-M-5	3520
Ballu BHP-P-3	2540
Ballu BHP-P-5	3210
Master B 22 EPB	28700

Helpful advice! When buying a heat gun, be sure to pay attention to the type of plug for connection and take into account the power of the sockets.

Rating of electric heat guns for summer cottages

In most cases, alternative heating equipment is used to heat residential premises in the country. Such buildings are located outside the city, so most of them are deprived of a centralized heating system. On sale you can find dozens of optimal models of domestic and foreign production, which are perfect for this purpose.

Electric heat gun Interskol TPE-3 can be used as the main or additional heat source. The device has lightweight construction and small dimensions, making the transportation of the device much easier. The gun is equipped with a fan having a metal impeller. The heating element has a special configuration that provides increased heat output. The design is equipped with a two-stage power control system and overheating protection.

Advantages of the heat gun Interskol TPE-3:

• high efficiency;
• reliability;
• long warranty period.

Among the shortcomings of this model, users noted a short cord, which somewhat limits the installation possibilities of the device.

Unlike the previous version, a ceramic heating element is installed in the Ballu BKX-5 electric heat gun. A power of 3 kW is enough to heat a room of 35 m². The ceramic-metal heating element provides fast and safe air heating. The device is equipped with a three-level power control system.

Advantages of the Ballu BKX-5 heat gun:

• possibility of air ventilation without heating;
• built-in thermostat;
• temperature control function;
• profitability;
• compact dimensions.

The disadvantages include a short wire and a small level of noise that occurs during operation.

Brand and model of the device Place in the rating	price, rub.
Interskol TPE-3 1	2270
Timberk TIH R2 5K 2	4300
FUBAG Bora Keramik 20M 3	2600
Shivaki SHIF-EL60Y4	4500
Timberk TIH R5 3M ECO 5	2340
Elitech TP 2EM 6	3050
Timberk TIN Q2 2M 7	2000
Ballu BKX-5 8	2000
Resanta TEP-2000K 9	1850
Interskol TPE-5 10	4000

How to choose an electric heat gun 220V according to technical parameters

The heat gun is installed on any horizontal surface. If necessary, the structure can be moved. The device works almost silently, which does not negatively affect the tenants of the apartment or the working environment in the office. Its performance depends on the technical characteristics of the gun. To decide which heat gun is better, you should study its parameters.

Note! There may be a slight odor when you turn on a new gun for the first time. This is considered normal. In the course of further operation, it will disappear.

When choosing a heating device, you need to pay attention to the following characteristics:

• power level;
• the presence or absence of the ability to configure power levels;
• fan performance;
• the speed at which the heated air flow exits the structure;
• outlet air temperature;
• voltage in electrical network;
• number of operating modes;
• fire safety level;
• device dimensions;
• degree of mobility;
• decorative qualities;
• noise exposure level;
• additional functionality.

How to choose an electric heat gun: calculating the optimal power

To decide which heat gun to buy for a garage, you should find out what power rating the design should have. This takes into account the size of the room. For example, if the dimensions of the garage are 4x6 m, by simple calculations you can find the desired indicator.

To begin with, the area of ​​\u200b\u200bthe room is calculated. In this case, it is equal to 24 m². Experts recommend adding a small margin in the form of 20% of this value to the required power indicator. The result is: 2.4x1.2 = 2.88 kW. This means that for the specified room, the minimum power of the heat gun is 3 kW.

There is another technique. It allows you to get more accurate results. It is advisable to use this option to calculate the power of a thermal electric gun for a home. In this case, the formula is not based on the area of ​​\u200b\u200bthe room, but on the degree of thermal conductivity of the walls and the volume of the room.

First you need to get the indicators necessary for calculations:

1. Room volume (m³) - the area of ​​\u200b\u200bthe room is calculated, and then multiplied by the height of the ceiling.
2. Difference between outside and inside temperature.
3. The coefficient of thermal conductivity of the walls.

Table of thermal conductivity of materials:

wall material	Thermal conductivity coefficient
Surfaces with high-quality thermal insulation	06,-1
Two-row brickwork or a wall with an average level of thermal insulation	1-2
Surfaces with poor insulation	2-3
Walls made of boards or profiled sheets (hangars)	3-4

To understand which heat gun to choose, just run necessary calculations, considering the same garage as an example. Room volume: 4х6х3=72 m³. If the temperature outside the building is -20°C, and inside - 15°C, then the difference will be 35°C. Taking 1 for the insulation coefficient, we get: 35x72x1 \u003d 2520 kcal / hour. 1 kW contains 860 kcal.

The result must be divided by 860 kcal and the result is 2.93 kW. Given that the power of the gun is taken with a margin, then such a room will require a device with 3.5 kW.

Helpful advice! You should not buy a gun with a high power rating for your home. Such devices drive a strong air flow, so they will create a lot of noise during operation.

How to choose a heat gun: voltage and duration of work

Operating voltage is another characteristic that needs attention. On the market there are units whose power exceeds 20 kW. For the operation of such structures, a three-phase electrical network is required, where the voltage is 380V. If you are planning to buy just such a heat gun for heating, you should definitely take care of replacing the wiring with a more powerful option.

Structures whose power does not exceed 7 kW can be powered from a 220V network, provided that the wire cross-section is designed for such loads. Before connecting the heat gun, it is advisable to calculate the optimal cable cross-section, taking into account power and current. Thanks to this, problems with wiring and short circuits can be avoided.

When choosing a heating device, it is also imperative to pay attention to the duration of uninterrupted operation. The device is not able to work for a long time without turning it off, otherwise it will fail very quickly. For this reason, manufacturers of heat guns put the marking "24/1" or "24/2" on the body. This means that the device is able to work around the clock with a break of 1-2 hours, depending on the specified mark.

There are other technical characteristics that affect operation. When choosing a device, be sure to pay attention to the level of noise exposure and the temperature range within which the gun is able to effectively carry out its work.

Note! The minimum operating temperature range for a quality device is 5-40°C.

The best models of electric heat guns 2 kW

Electric guns are characterized by a high degree of safety, since their principle of operation does not provide for the presence of an open flame. One of these designs is the Ballu BHP-PE-2 heat gun, which has three operating modes. The device is suitable for both partial and full room heating. The device can be used as a fan, the operation of which is not accompanied by air heating.

Thanks to the anti-vandal coating, the service life is significantly increased. The thermostat reliably protects the structure from overheating, ensuring safe operation.

Owners of small spaces will appreciate the compact dimensions of the Ballu BKN-3 heat gun. The device is completed with the strong case which provides protection against corrosion and mechanical influence. The manufacturer used ceramics as the material for the manufacture of the heating element.

Model advantages:

• compact size and lightweight design;
• industrial type fan with protection against moisture and dust;
• a heat shield that lowers case temperature;
• supports are protected by anti-vandal coating;
• handle for easy transportation.

This model has class A energy efficiency, so it can be used to quickly heat a room, as well as dry materials and treated surfaces.

The best models of electric heat guns 3 kW 220V

Devices with a power of 2 kW will not cope with the heating of rooms with a size of 30-35 m². To do this, you can use the Ballu BHP-PE-3 heat gun and other models similar to it. In this case, the capacity of the unit is 300 m³/h, and the power level varies from 0 to 3 kW.

Model advantages:

• shockproof and heat-resistant housing;
• stainless steel heating element;
• ventilation function without heating;
• adjustable position of the structure, allowing you to direct air flows;
• reliable protection against overheating in the form of a thermostat.

To heat garages and other non-residential premises, many consumers use an electric heat gun Resant TEP-3000K. For convenient transportation, a special handle is provided in the design, which allows you to transfer the device to any comfortable spot. The heating element has a rounded shape and provides rapid heating of the air in the room to the required temperature.

The gun operates in two modes:

1. Ventilation with full heating.
2. Ventilation without heating.

A metal grill is installed in the front of the case. It prevents debris and other particles from getting inside the device, ensuring fire safety and safety of parts. Control elements are made of heat-resistant plastic that can withstand high temperatures.

Helpful advice! The Resant TEP-3000K heat gun, like any other, will last much longer if it is cleaned and maintained in a timely manner.

Model advantages:

• stepped power control system;
• wide base for structural stability;
• effective protection against overheating;
• low level of noise impact;
• the body is not afraid of corrosion;
• safe operating system.

Strengths and weaknesses of the Resant TEP-3000K heat gun: consumer reviews

Many users have already experienced in practice the capabilities of the TEP-3000K gun and shared their opinion:

"Great gun. Among the advantages I want to note the low price. The device works almost silently and does not take up much space. Just right for a small space. I can’t say that a heat gun is an essential item, but such a thing in the house will not be superfluous. My husband periodically uses it in his garage, although we also took it for a bath. When there are severe frosts outside, pre-heating of the premises is indispensable. Without this gun, it took almost the whole day to kindle the bath, with the device a couple of hours are enough.

Elena Prodayvoda, Moscow

“Using a Resant welding machine in my garage. It is cold to work in winter, so I decided to buy myself a heat gun from the same company. A little disappointed. Welding machine I have good quality. I didn't think it would be different with the gun. It is, of course, small and very quiet, but in fact it heats the room weakly, eats up a lot of electricity. I don’t know whether the heat guns themselves are useless, or whether the model should have been taken more powerful. In general, it costs me almost nothing. Occasionally I use it to start a car engine.

Stanislav Sidorenko, Yekaterinburg

The best models of electric heat guns 5 kW

The manufacturer of electric heat guns Ballu offers users heating devices of various capacities and purposes. On sale you can find devices designed for domestic and professional use, which are combined in a series.

For rooms larger than 35 m², the BKX 7 model can be purchased. This gun has a ceramic-metal heating element and a power of 5 kW. Thanks to the steel walls, the body of the device does not heat up during operation.

Advantages of the Ballu BKX 7 heat gun:

• heating element made of ceramic-metal class A;
• case with increased margin of safety, made of steel;
• the ability to adjust temperatures;
• reliable and high-quality components;
• light and compact design;
• efficient heating;

• the service life of the heating element is at least 10 years;
• three-level security system;
• protection against twisting and pulling out of the cable is provided;
• the operating mode switch is protected against negative impact moisture and dust;
• the rubber coating on the legs reduces the level of noise and vibration when the gun is turned on.

Important! If a power failure occurs, it is advisable to unplug the appliance from the socket. The same applies to the time when the gun is not in use or is being cleaned.

The Timberk TIH R2 5K gun with the same power is designed for heating industrial and warehouse premises. The heating element has ribs that increase the area through which heat is transferred.

Model advantages:

• low noise level;
• high build quality;
• ergonomic design;
• efficient heating.

Users noticed only one drawback - the high consumption of electrical energy.

Features of semi-industrial ceramic heat guns

Models of electric heat guns with a heating element made of ceramics are especially popular on the market. Such devices belong to the category of semi-industrial or industrial heaters. Some modifications have a built-in cleaning system. It is a filter through which heated air passes before entering the room.

These devices are both stationary and portable. The principle of operation of the ceramic gun is the same as that of conventional models, where there is a metal heating element. In some modifications, adjustable blinds are installed. Due to this, the user has the opportunity to adjust the air supply in accordance with their needs.

Overview of ceramic heat gun Equation 2000 W

This model is a compact heat gun designed for semi-professional and domestic use. Most parts and body construction are made of stainless steel. Thanks to the powder enamel coating, all metal elements are protected from damage that can be caused by corrosion. This layer also performs an electrical insulating function.

Advantages of Equation 2000W:

• economical consumption of electrical energy;
• compact dimensions;
• several operating modes;
• convenient operation and transportation system.

The gun has 1 class of protection, which consists of a fuse and a mechanical thermostat. The device is designed for heating a room with an area of ​​​​not more than 20 m². There is no moisture protection, which is a minus if it is intended to use the structure for drying finishes on walls or in a garage with a high degree of air humidity. The heating element develops a power of 2 kW. The average price of the model is about 2000 rubles.

Helpful advice! Guns with composite and plastic body are less safe and practical. It is advisable to give preference to metal models.

Overview of ceramic heat gun Equation 3000 W

The Equation 3000 W is a relatively inexpensive heat gun model. The power of the ceramic heating element is 3 kW. This is enough to heat a garage, office or living space up to 25 m². The design has three operating modes, which are switched mechanically.

The device is equipped with a sensor that automatically disconnects the device from the mains, eliminating the possibility of overheating. The design also includes a fuse. This sensor is triggered if the device is turned over or dropped on its side. As a result, the supply of electricity to the heating element is interrupted. Thanks to this, the operation of the heat gun becomes safe.

The cylindrical body of the device is made of metal. The manufacturer took care of safety by making the delivery stable. The device is lightweight and small in size, so it is easy to move from one place to another. The average cost is 2500 rubles.

Features of industrial heat guns electric 380 Volts

Industrial guns are in most cases used to heat warehouses and industrial premises, workshops, hangars, bases, pavilions, etc. Some models have high power, which reaches 30 kW. Such equipment is designed for heating large rooms.

Advantages of industrial models:

• environmental friendliness;
• no need to ventilate the room;
• safe operating system;
• high reliability.

Industrial units, like household ones, operate exclusively at the expense of electrical energy. They do not emit unpleasant odors and smoke, while oxygen is retained in the room. Despite the high power, these designs are completely safe, because they are designed for such loads. Guns for industrial use work almost flawlessly. The structures contain the simplest systems and key elements, so the probability of breakage is minimal.

Review of professional heat gun Ballu BHP-M-15

The BHP-M-15 model belongs to the MASTER series of professional instruments. The manufacturer equipped the design with a capillary thermostat, which is highly accurate. This component allows you to maintain the air temperature in the room strictly within the specified limits.

All guns of this series have anti-vandal and fire protection. The thermostat is equipped with a reset option that can be performed manually. This eliminates the possibility that the device will resume its operation after an emergency shutdown has occurred, but the cause of overheating has not been eliminated. The design has a traditional rectangular shape. The average price of an electric heat gun 380V Ballu BHP-M-15 is 11,000 rubles.

Helpful advice! Before you buy a gun, it is advisable to make sure that there is an official service center in the city. Otherwise, any repair in the future will cause a lot of difficulties and financial costs. Sending the device to another city will significantly increase the time required to fix the breakdown.

Model advantages:

• reliable stainless steel heating element;
• high-precision thermostat of capillary type;
• industrial fan with protection against moisture and dust;
• manual restart option;
• metal case with anti-corrosion protection.

The device can be easily moved to another place in one hand. There is a three-phase plug on the body.

How to make your own electric heat gun

You can make an electric device for heating a room yourself. The simplest design consists of a heating element, a fan and an electric motor. All this is hidden in a metal case. The most difficult stage is the development of the scheme electrical circuit. To avoid errors, you can use ready-made options which can be found on the Internet. Most often, in the circuit, thermostats and a toggle switch are connected in series. The circuit is closed on the electric motor and the heating element.

Assembly technology of a simple design with a heating element

As a body for a future gun, you can take a piece of pipe large diameter. For this, metal or asbestos-cement products are suitable. The case size must be selected taking into account the span of the fan blades, which should cover one of the end sides of the device. Ready-made heating elements can be purchased at the store or removed from an old boiler or stove. To work, you will need a circuit breaker, a three-core cable, a circuit breaker, bolts.

Helpful advice! For the manufacture of the case, you can also use improvised means, for example, a small metal tank, an old pan, a galvanized bucket. The main thing is that the structure has thick walls.

To begin with, the required power of the device is determined. To do this, you can use the formula that was discussed earlier. After that, you need to check whether the wiring in the room can withstand such a load.

Next, the body part is made. If not at hand metal pipe, you can take a steel sheet. It bends into the desired position and is fixed with rivets, hoops or welding. If you intend to use a bucket or pan, you should saw off the bottom. The result should be a rectangular or cylindrical body.

Then the resistance of the heating element is compared with the calculated data. If necessary, 1-2 additional elements can be added to the circuit, which are connected in series. To increase power, the heating element is shortened. An electric motor and a fan are fixed from one end. The blades should cover the clearance as much as possible, but nothing should interfere with rotational movements. Connection of network wires is carried out through a fuse. This is where the switch is located.

The heating element must be fixed inside the case, preferably in the center. As fasteners, you can use plates made of refractory metals, or rivets. The heating element must be located at a sufficient distance from the fan, otherwise the motor will be subject to overheating. The wires should be brought out and connected to the network through another fuse.

The design is completely ready. Before starting its operation, it is necessary to check the quality of the insulation on all connections and perform trial testing. If the assembly is done correctly, a fan will start from one end, and heated air will come out from the other. Such a gun is very simple to manufacture and requires only the presence of time and minimal knowledge in electrics, although it will be much safer to purchase a ready-made device in a store.

When you need to quickly heat up a cold room that has not been heated for a long time, or maintain normal thermal conditions in a large enclosed space, dry moist air so that mold does not start in the room, the heat gun will ideal option to solve all these problems. And if the owner has already realized the need to buy something so useful to him, the next question that confronts him is how to choose a heat gun. The market offers a wide variety of options, each of which will be good for achieving a specific goal.

Description and use of units

Heat guns create a stream of hot air, dispersed throughout the room with a fan built into its body. This method of heating compares favorably with others. Here are some advantages of heat guns:

1. Ecological safety - the electric motor does not produce hazardous waste that appears during the combustion of combustible substances. The oxygen content in the heated air practically does not decrease. Since there is no open flame, the device is considered fireproof.
2. Ease of use - the heat gun does not need to install complex electrical equipment and other conditions, for example, hoods. You just need to plug it into the electrical network using a regular outlet with the required voltage.
3. Small size - despite the shape of the hull, the gun is quite compact when compared with other heating appliances that run on gas or diesel fuel. It easily fits in the trunk of a car, and it can be freely transported, for example, to the country.
4. Lack of noise - during the work the heat gun does not make loud sharp sounds. Their level, as a rule, does not exceed 35055 dB. The upper figure of this range is considered the normal noise level for office work.

Heat guns are very practical due to their size and weight.

Selection of models by power

The main thing in choosing an electrothermal gun is right choice heating power. It is she who affects the amount of air that will be warmed during the period of work. For example, for a product with a power of 2 kW, the air consumption is 120 cubic meters. m / h, and for a selected 3 kW gun, the thermal flow reaches 300 cubic meters. m/h So, such a product will provide heat to the house. A simplified selection scheme may be as follows: a power of 1 kW is enough to heat 10 square meters. m (if the height of the room does not exceed 3 m).

Professionals perform a more thorough calculation using a special formula.

When calculating, it is not the dimensions of the room that are taken into account, but its volume and the thermal conductivity of the walls.

Calculation example

The dimensions of the heated object are 10 square meters. m, and the level of its upper border is 3 m. Therefore, the volume of the object will be 30 cubic meters. m. Suppose that the device must heat the air in the room to at least + 15 ° C, while outside - frost -20 ° C. Therefore, the difference between these values ​​reaches 35°C. Let's say that the walls of the structure perfectly retain heat, and the thermal conductivity multiplier will be 1 unit.

In this video you will learn the pros and cons of a heat gun:

The calculation of the required power is carried out as follows: 30 times 35 times 1, then divide by 860. The total is 1.22 kW. This means that for a room with an area of ​​​​10 square meters. m, a heat gun with a power of 1.22 kW will be optimal for the best heating in the winter. But at the same time, it is better to purchase a model with some reserve, for example, with a power of 1.5 kW.

If you systematize the heating equipment by power, then products up to 5 kW are considered as household ones. Such heat guns operate from an electrical network with a voltage of 220 V. They are very easy to use in summer cottages, car garages, offices, private cottages. Sometimes such units are called fan heaters.

It is important to understand that not every heat gun comes with a power cord and power plug. Please note that they will need to be purchased separately.

Main design features

If a heat gun is required for heating, the choice must begin with taking into account the configuration of the unit body. In the heating equipment market, manufacturers exhibit models of two forms:

• rectangular;

• tubular.

They have their own characteristics and positive aspects.

The tubular variety has an elongated steel body that looks like a cylinder. A heating element is fixed in the depth of the case, which provides almost instantaneous access to the nominal temperature. A tubular outdoor unit allows you to produce a directed flow of hot air.

The object warms up extremely quickly, a heat gun of this type is suitable for drying rooms. However, dust and dirt, when sticking to the coil, can become a prerequisite for the appearance of foreign odors and excessive oxygen consumption. Therefore, for residential facilities, this kind of device will be irrelevant.

Each type of heat gun has its own characteristics.

A rectangular device contains a heating element as a heating source, and it, in turn, is much safer than a heating coil. Heating is not as fast as it happens in the tubular model, but at the same time it is more convenient and pleasant than from modifications with a tubular body. The device can be used in residential and office premises. The block is not so large and does not require much space.

It is worth paying attention to the structural components of the thermal gun. If it is bought for fixed use, it is worth making sure that it has a stable stand - legs or foot.

In some cases, the device must be moved frequently. The steel case heats up during use, and in order not to burn yourself and not damage others, you will need to hold the unit by the handle.

Heating level adjustment

In addition to the heating power, many models provide power control. The step switch can turn on full power to quickly warm up the room, or partial power for constant heat support, and also be used as a secondary source of heating. Some models are equipped with a fan that works without heating, only for air circulation.

For an electric heat gun, insurance against overheating is important. Reaching a critical temperature threshold during operation, the gun turns off. This can happen if the body of the device is accidentally covered with something - the protective system is triggered and the heating stops.

Overview of the best manufacturers

The market offers a large selection of heat guns with different parameters. Top brands to watch out for:

• master;
• ballu;
• force;
• Fubag;
• Timberk.

There are about 5-6 brands that are worthy of attention for their quality.

Master is a popular trade brand

This American manufacturer is considered one of the authorities and favorites in the industry for the manufacture of heat guns. The company introduced its first heat generator more than 60 years ago and since then has only improved the quality of its products. The assortment set includes models for home and industrial use.

Master B 2 EPB is a small-sized heat gun with an energy consumption of 2 kW. Equipped with a heating coil made of non-corrosive steel. It will be optimal for heating apartments and offices. The block is rectangular, equipped with a handle. The kit includes a mains plug, which means you can start using it right away.

Master B 30 EPR - industrial thermal gun, equipped with rollers. It has the ability to install an elastic hose to send heated air to rooms located nearby or through several partitions.

The power reaches 30 kW, therefore, the device can heat volumetric areas: hangars, workshops, repair and construction facilities.

Ballu is the first to create climate

This is an international brand. This manufacturer is known worldwide as a supplier of high-quality and durable heating equipment. The main plus is well-thought-out devices, comfort in use, control over overdrying of air, long service life.

There are two models worth mentioning:

• Ballu BHP-P-3;
• Ballu BKX-3.

Ballu BHP-P-3 - modification with a tubular block. The main feature is double walls. This moment eliminates excessive overheating of the outer part of the housing and will make the operation reliable and without risks. Distinctive features of the design make it possible to change the position of the body on the stand to change the direction of the heat flow.

Racks and rim have anti-vandal wear-resistant coating, and structural elements located inside the case are protected by a mesh. Such a heating thermal gun can become a temporary heater in a country cottage, a country house under construction or an office. The handle makes it easy to move around.

Ballu BKX-3 is a small and inexpensive thermal gun. Feature of this heating device - a ceramic heating element. Virtually no noise, vibration is minimal. The device of the gun is thought out in detail. The temperature is regulated by a toggle switch in the range from 0 to +40°C. The case is protected by a fine metal grill, which makes it impossible for foreign objects to penetrate inside. The switches are protected from getting wet, and the cable is protected from twisting and falling out.

Inforce is a domestic professional brand

This type of equipment involves constant use in unfavorable conditions for equipment. Its safety and performance are tested at the factory, so the user can be sure of the quality of the device. The quality of work and safety of operation are guaranteed by the manufacturer, therefore, the user will not have to doubt the usefulness of his purchase.

Inforce EH 3 T is a heat gun with a power of 3 kW. Its wires are thicker than other electrical appliances - this creates an additional degree of safety and prevents overheating of the electrical wiring. The body of the gun has a rectangular shape, and the heating element filled with magnesium oxide is made of nichrome. This prolongs its service life. Such a heat gun is a good option for a garage or utility room.

Fubag - reliable devices from Germany

Forty years of experience in the market of thermal appliances gives the company a high credit of trust around the world. The unshakably excellent quality of the equipment and the possibility of long-term operation - this is what distinguishes German heat guns. They also come with a 2 year warranty.

FUBAG SIROCCO 20 M has a compact cylindrical block that is adjustable to change the direction of heat flow. It is comfortable both for heating rooms and for drying surfaces. Due design features it can be easily delivered to a cold unheated room. After connecting to the network, it immediately starts fast heating. It is important that the lower thermal limit of work reaches -10°C. The presented electrothermal gun is suitable for transfers due to the handle and not very large weight - only 4.2 kg.

Timberk is a classic in the heating market

Timberk designers never cease to amaze customers with the latest and most versatile heaters. They shattered the notion that thermal guns consume too much a large number of electricity - more than other similar sources. Now they have created highly efficient products with excellent heat dissipation and a housing design that realizes the fastest heating.

Timberk TIH R2S 3K - a modification equipped with a non-corrosive steel heating coil and a coating that increases heat transfer. Energy intensity reaches 3 kW, only half of the power can be used. The main characteristic feature of the unit is the special “aerodynamic control” technology: thanks to it, the body design guarantees targeted air movement for the highest quality heating.

The gun works around the clock. It is durable and protected from overheating. Ease of installation and quality of materials comply with European quality standards and the requirements of Russian GOSTs.

Heat guns are a mobile electric fan heater with which you can heat a garage, house or apartment. There are thermal guns of direct and indirect (indirect) heating. It is the second type of equipment that is considered safer and suitable for residential premises.

The thermal gun can be used in two different situations. It can be both the only and additional source of heat generation:

• in the first case, during the winter, a household heat electric gun for the home is a great heater for the garage! And not only. On construction work when you need fast intensive drying of the finish, heat guns play an important role;
• in the second case - there is work in the winter and in shops, and in offices, and in trade pavilions. Also, a large workshop of an enterprise or a hangar can be equipped with electric guns; many supermarkets use similar industrial directional fan heaters for heating.

Prices for heat guns vary, as there is a device for car parking, and there is one for the airport, warming up the runway.

For car owners, heat guns will play an excellent service (for example, Timberk TIH R2 5K). In severe frosts, not every car starts the first time. Therefore, the device for car rooms performs the main service in warming up a frozen car. Literally in 10 minutes, a hot stream directed to the hood from a heat gun brings the car into a combat-ready state. Especially popular are guns with a timer and thermostat, which do not require constant monitoring of the operation of the unit.

There is another option. Often among men there are lovers - car mechanics. Such men do not leave their locksmith machines in technical rooms, even in severe frost. The garage heater is suitable for amateur locksmiths in full, as it will not only warm the air in the garage / outbuilding / barn to an acceptable temperature. At the same time, such a thermal electric gun will be able to raise the temperature of surrounding objects, which means that metals will not burn hands with cold. A water stationary thermal gun is also perfect for this option.

In other words, an air thermal electric gun for technical rooms will be the best winter purchase for any man if:

• you have an unheated room for a car, and at sufficiently low temperatures your car will not start;
• you have an unheated non-residential premises in which turning and plumbing (or other) equipment is installed, and you need to work at low temperatures.

Other types of heat guns

Industrial guns can also be liquid fuel. This is a diesel gun, gasoline or diesel fuel thermal gun. Diesel is characterized by low cost and the lowest consumption, which makes diesel-fueled units the most beneficial for users. The gas air gun has been widely used for installation stretch ceilings, as evidenced by numerous reviews of the masters. And for faster heating of premises, including greenhouses, ceramic heat guns are used.

You can choose and order inexpensive thermal guns with delivery in Moscow and Russian regions in the online store site.